DS3-3COM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DS3-3COM-MIB.
43
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
ds3 OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44 |
ds3Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44.1 |
ds3CfgTableThe DS3 Configuration Table. SEQUENCE OF DS3CfgEntry .1.3.6.1.4.1.429.1.44.1.1 |
ds3CfgEntryAn entry in the DS3 Configuration Table. DS3CfgEntry .1.3.6.1.4.1.429.1.44.1.1.1 |
ds3CfgIndexA unique value at the DS3 level in the chassis.rw INTEGER .1.3.6.1.4.1.429.1.44.1.1.1.1 |
ds3CfgXmitLineBuildOutThis object is used to configure the amount of attenuation
that is to be applied to the DS3 transmit signal in order
to control cross-talk, etc. The settings are for distances
of 0-225 feet or 226 to 450 feet. Default=225(1)rw Enumeration .1.3.6.1.4.1.429.1.44.1.1.1.2 |
ds3CfgMonitorPortSourceThis object is for designation of monitor port DS1 source.
Default=spanLine1(1).rw Enumeration .1.3.6.1.4.1.429.1.44.1.1.1.3 |
ds3Current OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44.2 |
ds3CurrentTableThis table contains various statistics being collected for
the current 15 minute interval. SEQUENCE OF DS3CurrentEntry .1.3.6.1.4.1.429.1.44.2.1 |
ds3CurrentEntryAn entry in the DS3 current table. DS3CurrentEntry .1.3.6.1.4.1.429.1.44.2.1.1 |
ds3CurrentIndexThe index value which uniquely identifies the DS3 interface
to which this entry is applicable.ro INTEGER .1.3.6.1.4.1.429.1.44.2.1.1.1 |
ds3CurrentFCPsThis object indicates near end path failure count. The
count of LOF or AIS events.ro Gauge .1.3.6.1.4.1.429.1.44.2.1.1.2 |
ds3CurrentFCCPsThis object indicates far end path failure count. The count
of Remote Alarm Indication (RAI) events.ro Gauge .1.3.6.1.4.1.429.1.44.2.1.1.3 |
ds3CurrentSESLsThe object is the counter associated with the number of
Severely Errored Seconds on the line.ro Gauge .1.3.6.1.4.1.429.1.44.2.1.1.4 |
ds3CurrentUASCPsThis object is the counter associated with the number of
Unavailable Seconds for the C-bit parity application.ro Gauge .1.3.6.1.4.1.429.1.44.2.1.1.5 |
ds3Interval OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44.3 |
ds3IntervalTableThe DS3 Interval Table contains various statistics
collected by each DS3 Interface over the previous 24 hours
of operation. The past 24 hours are broken into 96
completed 15 minute intervals. Each row in this table
represents one such interval (identified by
ds3IntervalNumber) and for one specific interface
(identified by ds3IntervalIndex). SEQUENCE OF DS3IntervalEntry .1.3.6.1.4.1.429.1.44.3.1 |
ds3IntervalEntryAn entry in the DS3 Interval Table. DS3IntervalEntry .1.3.6.1.4.1.429.1.44.3.1.1 |
ds3IntervalIndexThe index value which uniquely identifies the DS3 interface
to which this entry is applicable.ro INTEGER .1.3.6.1.4.1.429.1.44.3.1.1.1 |
ds3IntervalNumberA number between 1 and 96, where 1 is the most recently
completed 15 minute interval and 96 is the 15 minutes
interval completes 23 hours and 45 minutes prior to
interval 1.ro INTEGER .1.3.6.1.4.1.429.1.44.3.1.1.2 |
ds3IntervalSESLsThis object is the counter associated with the number of
Severely Errored Seconds on the line in the previous 15
minute interval.ro Gauge .1.3.6.1.4.1.429.1.44.3.1.1.3 |
ds3IntervalCVCPsThis object is the counter associated with the number of
near-end path code violations for the C-bit parity
application in the previous 15 minute interval.ro Gauge .1.3.6.1.4.1.429.1.44.3.1.1.4 |
ds3IntervalUASCPsThis object is the counter associated with the number of
Unavailable Seconds for the C-bit parity application in the
previous 15 minute interval.ro Gauge .1.3.6.1.4.1.429.1.44.3.1.1.5 |
ds3Total OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44.4 |
ds3TotalTableThe DS3 Total Table contains the cumulative sum of the
various statics for the 24 hour period preceding the
current interval. SEQUENCE OF DS3TotalEntry .1.3.6.1.4.1.429.1.44.4.1 |
ds3TotalEntryAn entry in the DS3 Total Table. DS3TotalEntry .1.3.6.1.4.1.429.1.44.4.1.1 |
ds3TotalIndexThe index value which uniquely identifies the DS3 interface
to which this entry is applicable.ro INTEGER .1.3.6.1.4.1.429.1.44.4.1.1.1 |
ds3TotalSESLsThis object is the counter associated with the number of
Severely Errored Seconds on the line in the previous 24
hour interval. Invalid 15 intervals count as 0.ro Gauge .1.3.6.1.4.1.429.1.44.4.1.1.2 |
ds3TotalCVCPsThis object is the counter associated with the number of
near-end path code violations for the C-bit parity
application in the previous 24 hour interval. Invalid 15
minute intervals count as 0.ro Gauge .1.3.6.1.4.1.429.1.44.4.1.1.3 |
ds3TotalUASCPsThis object is the counter associated with the number of
Unavailable Seconds for the C-bit parity application in the
previous 24 hour interval. Invalid 15 minute intervals
count as 0.ro Gauge .1.3.6.1.4.1.429.1.44.4.1.1.4 |
ds3TrapEnable OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44.5 |
ds3TrapEnableTableThe DS3 Trap eanble table contains the line status change
trap enable SEQUENCE OF DS3TrapEnableEntry .1.3.6.1.4.1.429.1.44.5.1 |
ds3TrapEnableEntryAn entry in Ds3 Trap Enable Table DS3TrapEnableEntry .1.3.6.1.4.1.429.1.44.5.1.1 |
ds3TrapEnableIndexAn unique value which identifies the DS3.ro INTEGER .1.3.6.1.4.1.429.1.44.5.1.1.1 |
ds3LineStatusChangeTEDS3 Line status change trap enable flagrw Enumeration .1.3.6.1.4.1.429.1.44.5.1.1.2 |
ds3TrapObj OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.44.6 |
ds3TrapObjTableDS3 Trap obj table is a pace holder for status string SEQUENCE OF Ds3TrapObjEntry .1.3.6.1.4.1.429.1.44.6.1 |
ds3TrapObjEntryAn entry in DS3 Trap Obj table Ds3TrapObjEntry .1.3.6.1.4.1.429.1.44.6.1.1 |
ds3TrapObjIndexAn unique value for the indexro INTEGER .1.3.6.1.4.1.429.1.44.6.1.1.1 |
ds3StatusObjStringFor line status string it is a place holder DisplayString .1.3.6.1.4.1.429.1.44.6.1.1.2 |