DOCS-IETF-CABLE-DEVICE-TRAP-MIB
AI MIB Summary
The DOCS-IETF-CABLE-DEVICE-TRAP-MIB defines SNMP notification objects for generating event traps on Cable Modems (CM) and Cable Modem Termination Systems (CMTS), capturing critical operational states including DOCSIS capability, QoS levels, upstream modulation types, and MAC addresses. These traps facilitate real-time monitoring of device registration, connectivity status, and configuration changes by referencing specific event identifiers and text descriptions from the DOCS-CABLE-DEVICE-MIB and DOCS-IF-MIB.
The Event Notification MIB is an extension of the CABLE DEVICE MIB defined in RFC 2669. It defines various trap objects for both cable modem and cable modem termination systems. Two groups of SNMP notification objects are defined. One group is for notifying cable modem events and one group for notifying cable modem termination system events. Common to all CM notification objects (traps) is that their OBJECTS statements contain information about the event priority, the event Id, the event message body, the CM DOCSIS capability, the CM DOCSIS QOS level, the CM DOCSIS upstream modulation type, the cable interface MAC address of the cable modem and the cable card MAC address of the CMTS to which the modem is connected.
These objects are docsDevEvLevel, docsDevId, docsDevEvText, docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode, docsIfCmStatusModulationType ifPhysAddress and docsIfCmCmtsAddress. The values of docsDevEvLevel, docsDevId, and docsDevEvText are from the entry which logs this event in the docsDevEventTable, which is defined in DOCS-CABLE-DEVICE-MIB of RFC 2669. The docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode, and docsIfCmStatusModulationType are defined in the DOCS-IF-MIB. The ifPhysAddress value is the MAC address Of the cable interface of this cable modem. The docsIfCmCmtsAddress specifies the MAC address of the CMTS
(if there is a cable card/ interface in the CMTS, then it is actually the cable interface interface MAC address to which the CM is connected). Individual CM trap may contain additional objects to provide necessary information.
Common to all CMTS notification objects (traps) is that their OBJECTS statements contain information about the event priority, the event Id, the event message body, the connected CM DOCSIS QOS status, the connected CM DOCSIS modulation type, the CM cable interface MAC address, the CMTS DOCSIS capability, and the CMTS MAC address.
These objects are docsDevEvLevel, docsDevId, docsDevEvText, docsIfCmtsCmStatusDocsisRegMode, docsIfCmtsCmStatusModulationType, docsIfCmtsCmStatusMacAddress, docsIfDocsisBaseCapability, and ifPhysAddress. The values of docsDevEvLevel, docsDevId, and docsDevEvText are similar to those in CM traps. The values of docsIfCmtsCmStatusDocsisRegMode, docsIfCmtsCmStatusModulationType, and docsIfCmtsCmStatusMacAddress are from the docsIfCmtsCmStatusEntry (defined in DOCS-IF-MIB) corresponding to a connected CM. The docsIfDocsisBaseCapability indicates the CMTS DOCSIS capability. The ifPhysAddress value is the CMTS MAC address (if there is a cable card/ interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM).
Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices.
Main OID:
docsDevTrapMIB.1.3.6.1.4.1.3727.20.20.3.1.1
38
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
docsDevTrapMIBThe Event Notification MIB is an extension of the
CABLE DEVICE MIB defined in RFC 2669. It defines various
trap objects for both cable modem and cable modem
termination systems. Two groups of SNMP notification
objects are defined. One group is for notifying cable
modem events and one group for notifying cable modem
termination system events. Common to all CM
notification objects (traps) is that their OBJECTS
statements contain information about the event priority,
the event Id, the event message body, the CM DOCSIS
capability, the CM DOCSIS QOS level, the CM DOCSIS
upstream modulation type, the cable interface MAC
address of the cable modem and the cable card MAC address
of the CMTS to which the modem is connected.
These objects are docsDevEvLevel, docsDevId,
docsDevEvText, docsIfDocsisBaseCapability,
docsIfCmStatusDocsisOperMode, docsIfCmStatusModulationType
ifPhysAddress and docsIfCmCmtsAddress. The values of
docsDevEvLevel, docsDevId, and docsDevEvText are from the
entry which logs this event in the docsDevEventTable,
which is defined in DOCS-CABLE-DEVICE-MIB of RFC 2669. The
docsIfDocsisBaseCapability, docsIfCmStatusDocsisOperMode,
and docsIfCmStatusModulationType are defined in the
DOCS-IF-MIB. The ifPhysAddress value is the MAC address
Of the cable interface of this cable modem. The
docsIfCmCmtsAddress specifies the MAC address of the CMTS
(if there is a cable card/ interface in the CMTS, then it
is actually the cable interface interface MAC address to
which the CM is connected). Individual CM trap may
contain additional objects to provide necessary
information.
Common to all CMTS notification objects (traps) is that
their OBJECTS statements contain information about the
event priority, the event Id, the event message body,
the connected CM DOCSIS QOS status, the connected CM
DOCSIS modulation type, the CM cable interface MAC
address, the CMTS DOCSIS capability, and the CMTS MAC
address.
These objects are docsDevEvLevel, docsDevId,
docsDevEvText, docsIfCmtsCmStatusDocsisRegMode,
docsIfCmtsCmStatusModulationType,
docsIfCmtsCmStatusMacAddress,
docsIfDocsisBaseCapability, and ifPhysAddress. The values
of docsDevEvLevel, docsDevId, and docsDevEvText are
similar to those in CM traps. The values of
docsIfCmtsCmStatusDocsisRegMode,
docsIfCmtsCmStatusModulationType, and
docsIfCmtsCmStatusMacAddress are from the
docsIfCmtsCmStatusEntry (defined in DOCS-IF-MIB)
corresponding
to a connected CM. The docsIfDocsisBaseCapability
indicates the CMTS DOCSIS capability. The ifPhysAddress
value is the CMTS MAC address (if there is a cable card/
interface in the CMTS, then it is actually the MAC
address of the cable interface which connected to the CM).
Copyright (C) The Internet Society (2003). This version
of this MIB module is part of RFC yyyy; see the RFC
itself for full legal notices. MODULE-IDENTITY .1.3.6.1.4.1.3727.20.20.3.1.1 |
docsDevTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1 |
docsDevTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1.1 |
docsDevCmTrapControlThe object is used to enable CM traps. From left to right,
the set bit indicates the corresponding CM trap is enabled.
For example, if the first bit is set, then
docsDevCmInitTLVUnknownTrap is enabled. If it is null,
the trap is disabled.rw Bits .1.3.6.1.4.1.3727.20.20.3.1.1.1.1.1 |
docsDevCmtsTrapControlThe object is used to enable CMTS traps. From left to right,
the set bit indicates the corresponding CMTS trap is enabled.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailTrap is enabled. If it is null,
the trap is disabled.rw Bits .1.3.6.1.4.1.3727.20.20.3.1.1.1.1.2 |
docsDevCmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0 |
docsDevCmInitTLVUnknownTrapEvent due to detection of unknown TLV during
the TLV parsing process.
The values of docsDevEvLevel, docsDevId, and
docsDevEvText are from the entry which logs this event
in the docsDevEventTable. The docsIfDocsisBaseCapability
indicates the DOCSIS version information. The
docsIfCmStatusDocsisOperMode indicates the QOS level of
the CM, while the docsIfCmStatusModulationType indicates
the upstream modulation methodology used by the CM.
The ifPhysAddress value is the MAC address of the cable
interface of this cable modem.
The docsIfCmCmtsAddress specifies the MAC address
of the CMTS to which the CM is connected to(if there is a cable
card/ interface in the CMTS, then it is actually the MAC address
of the cable interface which connected to the CM).
This part of information is uniformed across all CM traps. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.1 |
docsDevCmDynServReqFailTrapAn event to report the failure of a dynamic service
request happened during the dynamic services process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.2 |
docsDevCmDynServRspFailTrapAn event to report the failure of a dynamic service
response happened during the dynamic services process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.3 |
docsDevCmDynServAckFailTrapAn event to report the failure of a dynamic service
acknowledgement happened during the dynamic services process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.4 |
docsDevCmBpiInitTrapAn event to report the failure of a BPI initialization
attempt happened during the registration process. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.5 |
docsDevCmBPKMTrapAn event to report the failure of a Baseline Privacy Key
Management (BPKM) operation. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.6 |
docsDevCmDynamicSATrapAn event to report the failure of a dynamic security
association operation. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.7 |
docsDevCmDHCPFailTrapAn event to report the failure of a DHCP server.
The value of docsDevServerDhcp is the IP address
of the DHCP server. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.8 |
docsDevCmSwUpgradeInitTrapAn event to report a software upgrade initiated
event. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.9 |
docsDevCmSwUpgradeFailTrapAn event to report the failure of a software upgrade
attempt. The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.10 |
docsDevCmSwUpgradeSuccessTrapAn event to report the Software upgrade success event.
The values of docsDevSwFilename, and
docsDevSwServer indicate the software image name
and the server IP address the image is from. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.11 |
docsDevCmSwUpgradeCVCFailTrapAn event to report the failure of the verification
of code file happened during a secure software upgrade
attempt. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.12 |
docsDevCmTODFailTrapAn event to report the failure of a time of day server.
The value of docsDevServerTime indicates the server IP
address. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.13 |
docsDevCmDCCReqFailTrapAn event to report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.14 |
docsDevCmDCCRspFailTrapAn event to report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CM side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.15 |
docsDevCmDCCAckFailTrapAn event to report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CM side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.2.0.16 |
docsDevCmtsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0 |
docsDevCmtsInitRegReqFailTrapAn event to report the failure of a registration
request from a CM that happened during the CM initialization
process and detected on the CMTS side. The values of
docsDevEvLevel, docsDevId, and docsDevEvText are from
the entry which logs this event in the
docsDevEventTable. The docsIfCmtsCmStatusDocsisRegMode
and docsIfCmtsCmStatusMacAddress indicate the DOCSIS
QOS version and the MAC address of the requesting CM.
The docsIfCmtsCmModulationType indicates the upstream
modulation methodology used by the connected CM.
The docsIfDocsisBaseCapability and ifPhysAddress
indicate the DOCSIS version of the CMTS and the MAC
address of the CMTS (if there is a cable card/ interface
in the CMTS, then it is actually the MAC address of the
cable interface which connected to the CM) cable interface
connected to the CM. This part of information is
uniformed across all CMTS traps. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.1 |
docsDevCmtsInitRegRspFailTrapAn event to report the failure of a registration
response happened during the CM initialization
process and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.2 |
docsDevCmtsInitRegAckFailTrapAn event to report the failure of a registration
acknowledgement from CM happened during the CM
initialization process and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.3 |
docsDevCmtsDynServReqFailTrapAn event to report the failure of a dynamic service
request happened during the dynamic services process
and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.4 |
docsDevCmtsDynServRspFailTrapAn event to report the failure of a dynamic service
response happened during the dynamic services process
and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.5 |
docsDevCmtsDynServAckFailTrapAn event to report the failure of a dynamic service
acknowledgement happened during the dynamic services
process and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.6 |
docsDevCmtsBpiInitTrapAn event to report the failure of a BPI initialization
attempt happened during the CM registration process
and detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.7 |
docsDevCmtsBPKMTrapAn event to report the failure of a BPKM operation
which is detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.8 |
docsDevCmtsDynamicSATrapAn event to report the failure of a dynamic security
association operation which is detected in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.9 |
docsDevCmtsDCCReqFailTrapAn event to report the failure of a dynamic channel
change request happened during the dynamic channel
change process in the CM side and detected in the
CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.10 |
docsDevCmtsDCCRspFailTrapAn event to report the failure of a dynamic channel
change response happened during the dynamic channel
change process in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.11 |
docsDevCmtsDCCAckFailTrapAn event to report the failure of a dynamic channel
change acknowledgement happened during the dynamic channel
change process in the CMTS side. NOTIFICATION-TYPE .1.3.6.1.4.1.3727.20.20.3.1.1.1.3.0.12 |
docsDevTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1.4 |
docsDevTrapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1.4.1 |
docsDevTrapCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3727.20.20.3.1.1.1.4.2 |