DNOS-NSF-MIB
AI MIB Summary
The DNOS-NSF-MIB module manages and monitors Non-Stop Forwarding (NSF) state synchronization and FastPath operational status on Dell Networking OS (DNOS) switches to ensure continuous packet forwarding during control plane failovers. It exposes specific counters and status indicators for NSF recovery events, switchover readiness, and FastPath engine health to validate high-availability resilience.
This MIB defines the objects used for FastPath to configure and report information and status of NSF features.
Main OID:
fastPathNsf.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46
31
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
fastPathNsfThis MIB defines the objects used for FastPath to configure and report information and status of NSF features. MODULE-IDENTITY .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46 |
agentNsfTraps OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.0 |
agentNsfStackRestartCompleteSent when the stack finishes restarting after a failover. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.0.1 |
agentNsfUnitTableA table of Per-Unit configuration objects for NSF. SEQUENCE OF AgentNsfUnitEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.1 |
agentNsfUnitEntryEach Instance corresponds with a different unit managed by this agent. AgentNsfUnitEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.1.1 |
agentNsfUnitSupportIndicates if the unit supports the NSF feature.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.1.1.1 |
agentNsfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2 |
agentNsfAdminStatusControls whether NSF is enabled on the unit/stack.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.1 |
agentNsfOperStatusIndicates whether NSF is enabled on the unit/stack.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.2 |
agentNsfLastStartupReasonThe type of activation that caused the software to start the last time. unknown: The switch rebooted for an unknown reason. power-on: The switch rebooted. This could have been caused by a power cycle or an administrative 'Reload' command. warm-admin-move: The administrator issued a command for the stand-by manager to take over. cold-admin-move: The administrator issued a command for the stand-by manager to take over, but the system was not ready for a warm-failover. warm-auto-restart: The primary management card restarted due to a failure, and the system executed a nonstop forwarding failover. cold-auto-restart: The system switched from the active manager to the backup manager and was unable to maintain user data traffic. This is usually caused by multiple failures occurring close togetherro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.3 |
agentNsfTimeSinceLastRestartTime since the current management card became the active management card.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.4 |
agentNsfRestartInProgressWhether a restart is in progress. A restart is not considered complete until all hardware tables have been fully reconciled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.5 |
agentNsfWarmRestartReadyWhether the initial full checkpoint has finished.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.6 |
agentNsfBackupConfigurationAgeAge of the configuration on the backup unit. The time since the running configuration was last copied to the backup unit.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.7 |
agentNsfInitiateFailoverTriggers an administrative failover to the backup unit.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.2.8 |
agentCheckpointStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3 |
agentCheckpointClearStatisticsWhen set to enable(1), resets checkpoint statistics.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.1 |
agentCheckpointMessagesTotal number of checkpoint messages sent.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.2 |
agentCheckpointBytesSize in bytes of the total ammount of checkpoint messages sent.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.3 |
agentCheckpointTimeSinceCountersClearedIndicates how long since the Checkpoint counters have been cleared.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.4 |
agentCheckpointMessageRateIntervalIndicates the duration in seconds of the message rate interval.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.5 |
agentCheckpointMessageRateNumber of checkpoint messages received in the last interval defined by agentCheckpointMessageRateInterval.ro Gauge32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.6 |
agentCheckpointHighestMessageRateHighest number of checkpoint messages received in an interval defined by agentCheckpointMessageRateInterval.ro Gauge32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.3.7 |
agentNsfOspfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4 |
agentNsfOspfSupportModerw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.1 |
agentNsfOspfRestartIntervalrw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.2 |
agentNsfOspfRestartStatusro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.3 |
agentNsfOspfRestartAgero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.4 |
agentNsfOspfRestartExitReasonro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.5 |
agentNsfOspfHelperSupportModerw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.6 |
agentNsfOspfHelperStrictLSACheckingrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.46.4.7 |