DLINK-DXS-1210-12SC-AX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DLINK-DXS-1210-12SC-AX-MIB.
1522
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
1522 total| Object Name |
|---|
d-link OBJECT IDENTIFIER .1.3.6.1.4.1.171 |
dlink-products OBJECT IDENTIFIER .1.3.6.1.4.1.171.10 |
dlink-DXS1210SeriesProd OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139 |
dxs-1210-12sc OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3 |
dxs-1210-12sc-AX OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1 |
dlinkDeviceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1 |
deviceInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1 |
deviceInformation OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.1 |
deviceInfoDeviceTypeDevice Information. Device Typero DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.1.1 |
deviceInfoBootPROMVersionDevice Information. Boot PROM Versionro DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.1.2 |
deviceInfoFirmwareVersionDevice Information. Firmware Versionro DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.1.3 |
deviceInfoHardwareVersionDevice Information. Hardware Versionro DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.1.4 |
deviceInfoMACAddressDevice Information. MAC Addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.1.1.1.5 |
deviceInfoSystemTimeDevice Information. System Timero DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.1.6 |
deviceInfoSerialNumberDevice Information. Serial Numberro DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.1.7 |
deviceSwitchCPULast5SecUsageIndicates the average CPU usage in last 5 second of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.1.8 |
deviceFunction OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2 |
firmwareInformationTableThe table of Firmware Information. SEQUENCE OF FirmwareInformationEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.1 |
firmwareInformationEntryThe list ofFirmware Information entry. FirmwareInformationEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.1.1 |
firmwareInfoImageIDFirmware Information. Image ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.1.1.1 |
firmwareInfoVersionFirmware Information. Version.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.2.1.1.2 |
firmwareInfoSizeBFirmware Information. Size B.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.1.1.3 |
firmwareInfoUpdateTimeFirmware Information. Update Time.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.2.1.1.4 |
devFunFwUpgradeAndBackup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2 |
devFunFwServerIpAddrTypeAddress type of IP Address of the remote system to which the switch file have to be transfer.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.1 |
devFunFwServerIpvxAddrIP Address of the remote system to which the switch file have to be transfer.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.2 |
devFunFwServerInterfaceNameSpecifies the interface name when the cmFwServerIpvxAddr is linklocal address.rw OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.3 |
devFunFwSrcFilenameConfigure firmware filename to download or upload.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.4 |
devFunFwOperationThe operates to perform download or upload file to the unit.
This object is used in conjunction with Ip and FileName.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.5 |
devFunFwOperationStatusThe current operation status of file upload or download.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.6 |
devFunFwTransferPercentageThe file transfer percentage of the file upload or download.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.7 |
devFunFwRetryCountThe number of retry when upgrade fail.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.8 |
devFunFwServerStatusThe current operation status of file upload or download.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.9 |
devFwOperationImageIdThe image ID need to upgrade.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.10 |
devFwNextBootImageIdThe image ID when next boot up.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.11 |
devFwActualBootImageIdThe image ID that current boot-up.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.2.12 |
devFunConfigInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.3 |
devFunCfgInfoTableA list of configuration entries. SEQUENCE OF DevFunCfgInfoEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.3.1 |
devFunCfgInfoEntryA list of configuration entries. DevFunCfgInfoEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.3.1.1 |
devFunCfgIdA unique value, greater than zero, for each configuration id.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.3.1.1.1 |
devFunCfgSizeThe configuration file size by id.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.3.1.1.2 |
devFunCfgUpdateTimeThe configuration last update time by id.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.3.1.1.3 |
devFunConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4 |
devFunCfgServerIpAddrTypeAddress type of IP Address of the remote system to which the switch file have to be transfer.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.1 |
devFunCfgServerIpvxAddrIP Address of the remote system to which the switch file have to be transfer.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.2 |
devFunCfgSrcFilenameConfigure firmware filename to download or upload.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.3 |
devFunCfgStartUpConfigIDThis object is used to select the restore configuration id.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.4 |
devFunCfgOperConfigIDThis object is used to select the operate configuration id for restore or backup.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.5 |
devFunCfgOperationThe operates to perform download or upload file,
download means transfer file from server to dut,
upload means transfer file from dut to server.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.6 |
devFunCfgSaveSave current configuration to file.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.7 |
devFunCfgOperationStatusThe current operation status of file upload or download.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.8 |
devFunCfgTransferPercentageThe file transfer percentage of the file upload or download.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.9 |
devFunCfgServerInterfaceNameSpecifies the interface name when the cmCfgServerIpvxAddr is linklocal address.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.10 |
devFunCfgServerStatusThe current operation status of file upload or download.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.11 |
devFunCfgCurrStartUpConfigIDThis object is used to refer to the startup configuration id.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.4.12 |
devFunLogBackup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.5 |
devFunLogBackupToTftpIpTypeType of IP interface.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.5.1 |
devFunLogBackupToTftpIpAddrThe TFTP server's IP address is used to download Log file.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.5.2 |
devFunLogBackupToTftpDestURLThe Log filename is used to download to the tftp client.rwobsolete DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.2.5.3 |
devFunLogBackupToTftpOperThe operate to backup log.rwobsolete Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.5.4 |
devFunLogBackupToTftStatusThe backup log status.roobsolete Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.5.5 |
devFunPing OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6 |
devPingDestIpTypeThe IP address type of the node to be pinged.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.1 |
devPingDestIpAddrThe IP address of the node to be pinged, set ip type before set it.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.2 |
devPingTimeoutThe time in seconds after which the entity waiting
for the ping response times out.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.3 |
devPingTimesThe number of times the given node address is to be pinged.
value 0 for infinite times.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.4 |
devPingStartThe ping event of ping operate.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.5 |
devPingStatusThe current status of the Ping operatero Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.6 |
devPingSuccessesThe number of ping responses received.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.7 |
devPingV4ProbeHistoryTableDefines a table for storing the results of ping
operations. The number of entries in this table is
limited per entry in the fsipv6PingTable by the value
of the corresponding cmPingProbeMaxRow object.
An implementation of this MIB will remove the oldest
entry in the cmPingProbeHistoryTable of the
corresponding entry in the cmPingProbeMaxRow to allow
the addition of an new entry once the number of rows
in the cmPingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the cmPingProbeMaxRow. SEQUENCE OF DevPingV4ProbeHistoryEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.8 |
devPingV4ProbeHistoryEntryDefines an entry in the cmPingProbeHistoryTable.
The first index elements identify the
Probe history entry that a fsPingTable belongs
to. The second index element selects a single
probe result. DevPingV4ProbeHistoryEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.8.1 |
devPingIndexThe index identify the Probe history entry that
fsPingTable belongs toro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.8.1.1 |
devPingProbeIndexThe probe history sequence of this entry belong toro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.8.1.2 |
devPingProbeHistoryResponseTimeThe amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.8.1.3 |
devIpv6PingProbeHistoryTableDefines a table for storing the results of ping
operations. The number of entries in this table is
limited per entry in the fsipv6PingTable by the value
of the corresponding cmIpv6PingProbeMaxRow object.
An implementation of this MIB will remove the oldest
entry in the cmIpv6PingProbeHistoryTable of the
corresponding entry in the cmIpv6PingProbeMaxRow to allow
the addition of an new entry once the number of rows
in the cmIpv6PingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the cmIpv6PingProbeMaxRow. SEQUENCE OF DevIpv6PingProbeHistoryEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.9 |
devIpv6PingProbeHistoryEntryDefines an entry in the cmIpv6PingProbeHistoryTable.
The first index elements identify the
Probe history entry that a fsIpv6PingTable belongs
to. The second index element selects a single
probe result. DevIpv6PingProbeHistoryEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.9.1 |
devIpv6PingIndexThe index identify the Probe history entry that
fsIpv6PingTable belongs toro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.9.1.1 |
devIpv6PingProbeIndexThe probe history sequence of this entry belong toro INTEGER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.9.1.2 |
devIpv6PingProbeHistoryResponseTimeThe amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.1.1.2.6.9.1.3 |
devFunLangMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.2.7 |
devFunLangMgmtFileLanguage Management. Language Filerwobsolete DisplayString .1.3.6.1.4.1.171.10.139.3.1.1.1.2.7.1 |
devFunLangMgmtApplyLanguage Management. Applyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.1.1.2.7.2 |
devFunRestartThis object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again.
This objects also allows user to reset swith(all configuration
set to default) and reset switch without ip(except ip configuration
saved, configuration set to default) and reset switch without ip and
vlan(except ip and vlan configuration saved, configuration set to default)
When the switch operationally goes down, configuration
save operation is initiated based on the configuration save
option chosen.
When the switch operationally come up, the saved configurations
are restored based on the restore option chosen.
Once the switch is restarted, the value of this object reverts
to noreboot.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.8 |
devFunWizardIgnoreNextTimeThis object indicates Smart Wizard ignore next time or not.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.2.9 |
deviceErrorCodeInformation OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.3 |
deviceErrorCodeTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF DeviceErrorCodeEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.3.1 |
deviceErrorCodeEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. DeviceErrorCodeEntry .1.3.6.1.4.1.171.10.139.3.1.1.1.3.1.1 |
devErrorCodeIndexError code index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.1.1.3.1.1.1 |
devErrorStringThe error string of the index.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.1.1.3.1.1.2 |
deviceFan OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.1.1.4 |
deviceFanStatusEnable/Disable Loopback detection function.
The Loopback Detection function is used to detect the thermal sensor's
status is ok or not , if the status is Enable ,that means the smartfan module
will be on work ,it will detect the thermal sensor and send status change log.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.1.1.4.1 |
dlinkSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2 |
sysInformationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.1 |
systemNameSystem name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character: ( ) V + _ = .rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.2.1.1 |
systemLocationThe location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.2.1.2 |
systemContactThe textual identification of the contact person for
this managed node, together with information on how
to contact this person. If no contact information is
known, the value is the zero-length string.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.2.1.3 |
syslogGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.4 |
syslogMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.4.1 |
syslogGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.4.1.1 |
syslogSourceInterfaceStateThis object indicates the source address of the SYSLOG packet should be assign or not.
If enable, the VLAN ID of the interface whose IP address
will be used as the source address for sending the SYSLOG packet.
If disable, the IP address of the closest interface will be used.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.4.1.1.1 |
syslogSourceInterfaceVIDThis object indicates the VLAN ID of the interface whose IP address
will be used as the source address for sending the SYSLOG packet.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.4.1.1.2 |
syslogLogbuffer OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.4.1.2 |
syslogClearLogBufferClears the buffered logs. This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.2.1 |
syslogLogBufferEnabledThis object indicates the state of logging system messages to the
local buffer.
Messages must enter the local message buffer first before it can
be further dispatched to other destinations.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.4.1.2.2 |
syslogLogBufSeverityThis object indicates the severity level of system messages.
The messages at that severity level or a more severe level will be
logged to message buffers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.4.1.2.3 |
syslogLogBufWriteDelayThis object indicates the interval for periodic writing of the
logging buffer to FLASH. The valid value is N to 65535.
N is project dependent. The default interval is 300 seconds.
Setting this object to -1 means infinite which will disable
periodical writing logging buffer to FLASH.
Setting this object to 0 means writing logging buffer
to flash by trigger way.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.171.10.139.3.1.2.4.1.2.4 |
syslogServerTableA table consists of a list of SYSLOG servers to log system messages
and debug output to a remote SYSLOG server host. SEQUENCE OF SyslogServerEntry .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5 |
syslogServerEntryAn entry defines information for a SYSLOG server. SyslogServerEntry .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1 |
syslogServerIndexthe server config entry index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.1 |
syslogServerAddressTypeThis object indicates the type of the server address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.2 |
syslogServerAddressThis object indicates the IP or IPv6 address of the SYSLOG server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.3 |
syslogServerPortThis object indicates the UDP port number to be used for the
SYSLOG server.rw INTEGER (514 | 1024..65535) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.4 |
syslogServerSeverityThis object indicates the severity of log messages that will be
sent to the server.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.5 |
syslogServerFacilitySpecifies the logging facility of the log host.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.6 |
syslogServerRowstatusThe row status variable, used according to installation
and removal conventions for conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.5.1.7 |
syslogBufferTableNumThis object indicates the number of entries presented in the
syslogBufferTable.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.2.4.1.6 |
syslogBufferTableA table consists of a list of system log messages. SEQUENCE OF SyslogBufferEntry .1.3.6.1.4.1.171.10.139.3.1.2.4.1.7 |
syslogBufferEntryAn entry defines a log message. SyslogBufferEntry .1.3.6.1.4.1.171.10.139.3.1.2.4.1.7.1 |
syslogBufferIndexAn index that uniquely identifies the message.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.2.4.1.7.1.1 |
syslogBufferDateAndTimeThe date and time when the message is logged.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.7.1.2 |
syslogBufferDescriptionThe content of the log message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.4.1.7.1.3 |
syslogBufferSeverityThis object indicates the severity of log messages that will be
sent to the server.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.4.1.7.1.4 |
sysPortConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.13 |
portCtrlTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF PortCtrlEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.1 |
portCtrlEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. PortCtrlEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1 |
portSetIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.1 |
portSetMediaTypeMedia Type.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.2 |
portSetStateEnables / disables Port state.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.3 |
portSetAutoDowngradeEnables / disables auto downgrade for the interface.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.4 |
portSetFlowControlOn / off flow control for the interface.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.5 |
portSetDuplexConfigures port settings auto/half/full mode.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.6 |
portSetSpeedConfigures port settings speed.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.7 |
portSetCapaAdvertisedConfigures port settings interface capability advertised 100M/1000M/10G .rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.8 |
portSetDescriptionConfigures port settings Description.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.9 |
portSetLinkStatusShow port settings LinkStatus up /down.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.1.1.10 |
portStatusTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF PortStatusEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.2 |
portStatusEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. PortStatusEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1 |
portStaIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.1 |
portStaMediaTypeMedia Type.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.2 |
portStaStatusShow port status Link Status up /down.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.3 |
portStaMacAddrShow port status MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.4 |
portStaVlanThe VLAN-ID assigned to untagged frames received on this port.
The port in native VLAN will also been set as untagged as default setting.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.5 |
portStaFlowCtrlOpSendOn / off flow control Operator Send for the interface.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.6 |
portStaFlowCtrlOpReceOn / off flow control Operator Receive for the interface.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.7 |
portStaDuplexShow port Status Duplex auto/full mode.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.8 |
portStaSpeedShow port Status speed.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.2.1.9 |
errDisAssertTrapStateThis object control whether sending trap or not when port entering into Err Disable state.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.3 |
errDisClearTrapStateThis object control whether sending trap or not when port exiting from Err Disable state.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.4 |
errDisNotificationRateExpressed in the number of notifications can be generated
per minute.
This object configures the rate-limit of SNMP Notification for
errDisable feature.
A value of 0 indicates that an SNMP Notification is generated
for every error disabled event.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.13.5 |
errDisIfStatusTableThe Port Error Disable table. SEQUENCE OF ErrDisIfStatusEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.6 |
errDisIfStatusEntryA list of information for the err port of the device. ErrDisIfStatusEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1 |
errDisIfStatusPortIndexThis object is the interface index of the interface
disabled by a feature.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1.1 |
errDisIfStatusVlanIndexThis object indicates the VLAN in the given interface
that has been error-disabled.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1.2 |
errDisPortStateThis object decides whether the port state is enabled or disabled.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1.3 |
errDisPortConnectStatusThis object decides whether the PortStatus is err-disabled.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1.4 |
errDisPortReasonThis object indicats the reason for Port Error Disable event occur.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1.5 |
errDisPortRecoveryTimeLeftThis object indicats the remaining time for Port Error Disable state recovery.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.13.6.1.6 |
errDisRecoveryTableThis table contains the recovery mechanism for the features with
error-disable functionality. SEQUENCE OF ErrDisRecoveryEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.7 |
errDisRecoveryEntryAn entry is created for each feature which has error-disable
functionality. ErrDisRecoveryEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.7.1 |
errDisRecoveryReasonThis object indicates the cause of error-disable.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.7.1.1 |
errDisRecoveryStatusThis object specifies whether the system can
automatically recover a system entity that has been
disabled by the cause.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.13.7.1.2 |
errDisRecoveryIntervalSpecifies the error-recovery time interval on specific cause
to recover the port/interface from the error disabled situation.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.13.7.1.3 |
errDisTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.13.8 |
errDisTrapsList OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.13.8.0 |
errDisNotifyPortDisabledAssertThe trap is sent when a port enters into error disabled state. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.2.13.8.0.1 |
errDisNotifyPortDisabledClearThe trap is sent when a port recovery from error disabled state. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.2.13.8.0.2 |
errDisNotifyVlanDisabledAssertThe trap is sent when a Port with a VID loop occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.2.13.8.0.3 |
errDisNotifyVlanDisabledClearThe trap is sent when a Port with a VID restarts after the interval time. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.2.13.8.0.4 |
jumboFrameTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF JumboFrameEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.14 |
jumboFrameEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. JumboFrameEntry .1.3.6.1.4.1.171.10.139.3.1.2.13.14.1 |
portIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.13.14.1.1 |
maxReceFrameSizeInterface index of the port for the configuration
in this entry applies.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.13.14.1.2 |
sysSNTPSettingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.17 |
sntpClockSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.17.1 |
sntpTimeSecondsThis object is for setting the system time in seconds
from Epoch (00:00:00 UTC, January 1, 2009). Notice :
input value must larger than 284083276 (00:00:00 UTC,
January 1, 2009) and smaller than 1136073599 (23:59:59
UTC, December 31, 2035).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.17.1.1 |
sntpTimeZoneSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.17.2 |
sntpSummerTimeStateThis object indicates the mode of the system to automatically
switch to Summer Time (Daylight Saving Time).
disable(1) - The Daylight Saving Time feature is disabled.
recurring(2) - The Daylight Saving Time feature is enabled.
The Summer Time should start and end on the specified
week day of the specified month.
format [weekofmonth-weekofday-month,HH:MM].
Example:- Third-Mon-Apr,17:30
date(3) - The Daylight Saving Time feature is enabled.
The Summer Time should start and end on the specified date
of the specified month.
format [dayofmonth-month,HH:MM].
Example:- 01-Apr,17:30.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.17.2.1 |
sntpGMTMinutesSpecifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.17.2.2 |
sntpSummerTimeStartThis object indicates when the Summer Time starts.
This value is always interpreted within the context of a
sntpSummerTimeState value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.17.2.3 |
sntpSummerTimeEndThis object indicates when the Summer Time ends.
This value is always interpreted within the context of a
sntpSummerTimeState value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.17.2.4 |
sntpSummerTimeOffsetThe value of this object indicates number of minutes to add
or to subtract during Summer Time. This object is not meaningful
when sntpSummerTimeState object is 'disable'.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.17.2.5 |
sntpSNTPSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.17.3 |
sntpGlobalStateEnable/Disable SNTP function in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.17.3.1 |
sntpPollIntervalSNTP Poll Interval In Seconds (30-99999)rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.17.3.2 |
sntpServerTableThe table contains configured SNTP/NTP servers in the system. SEQUENCE OF SntpServerEntry .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3 |
sntpServerEntryEach entry in the table contains necessary information to
send SNTP request to the servers. SntpServerEntry .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1 |
sntpServerAddrTypeThe IP address type ipv4 or ipv6.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.1 |
sntpServerAddrThe unicast IPv4/IPv6 server address in the Unicast Addressing modero InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.2 |
sntpServerStratumstratum levels define the distance from the reference clock.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.3 |
sntpServerVersionsntp server version.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.4 |
sntpServerLastReceiveThe value of sysUpTime when this server was synced.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.5 |
sntpServerSyncedThis object indicates whether the corresponding server is the
current synced server.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.6 |
sntpServerRowStatusThe activation of a row adds server entry. The destruction of a row
removes server entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.17.3.3.1.7 |
sysTimeRangeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.2.38 |
timeRangeTableA table to configure time Range in the system. SEQUENCE OF TimeRangeEntry .1.3.6.1.4.1.171.10.139.3.1.2.38.1 |
timeRangeEntryA schedule entry to configure time Range in the system. TimeRangeEntry .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1 |
timeRangeNameThe Schedule name associated with the Schedule entry (e.g., `abc, bbb').ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.1 |
timeRangeIndexThe Time Range identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 52.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.2 |
timeRangeStartHourStart hour of the Schedule entry.
The value must be from 0 to 23.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.3 |
timeRangeStartMinuteStart minute of the Schedule entry.
The value must be from 0 to 59.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.4 |
timeRangeEndHourEnd hour of the Schedule entry.
The value must be from 0 to 23.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.5 |
timeRangeEndMinuteEnd minute of the Schedule entry.
The value must be from 0 to 59.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.6 |
timeRangeWeekdayEnable/Disble scheduling weekday list.rw Bits .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.7 |
timeRangeRowStatusThe status of an entry in the Time Range Information Table. Only a subset
of the rowstatus variables (active, notinservice, createAndWait, destroy)
are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.2.38.1.1.8 |
dlinkManagement OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3 |
mgtUserAccountGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.1 |
userAccountsManagementSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.1.1 |
userAccountsTableA table to User Accounts Settings. User Management Settings. SEQUENCE OF UserAccountsEntry .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1 |
userAccountsEntryAn entry appears in User Accounts Settings. User Management Settings. UserAccountsEntry .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1.1 |
userNameThe name of user entry.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1.1.1 |
userPrivilegeUser Management Settings. Privilege (1-15)rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1.1.2 |
userEncryptControlEnable or disable Encrypt of user password.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1.1.3 |
userPasswordThe password of user entry.
0 means no password.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1.1.4 |
userRowStatusRow Status of user Accounts Entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.1.1.1.1.5 |
userAccountsSessionTable OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.1.2 |
userSessionTableEntryA Session Table contain the user login information. SEQUENCE OF UserSessionEntry .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1 |
userSessionEntryA Session Table contain the user login information. UserSessionEntry .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1 |
sessionIDThe index of session table.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1.1 |
liveTimeThe time peroid user has kept login.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1.2 |
loginTypelogin client of http, telnet, ssh or console.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1.3 |
loginIPlogin ip through http, ssh, or telnet.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1.4 |
loginUserLevelThe level of session which user login.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1.5 |
loginUserNameThe name of login user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.1.2.1.1.6 |
mgtPasswordEncryptionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.2 |
passwordEncryptionStatusThis object is used to set Password Encryption State Enable\Disable.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.2.1 |
mgtSnmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3 |
snmpGlobalSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.1 |
snmpGlobalStateThis object is for enabling or disabling SNMP Community function.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.1 |
snmpResBroadReqThis object is for enabling or disabling SNMP Response Broadcast Request.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.2 |
snmpUDPPortSNMP UDP Port (0-65535).rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.3.3.1.3 |
snmpTrapSourceInterfaceTrap Source Interface.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.1.4 |
snmpTrapGlobalStateThis object is for enabling or disabling SNMP Trap Global State.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.5 |
snmpTrapSNMPAuthTrapThis object is for enabling or disabling SNMP login fail
event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.6 |
snmpTrapPortLinkUpThis object is for enabling or disabling Port Link Up.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.7 |
snmpTrapPortLinkDownThis object is for enabling or disabling Port Link Down.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.8 |
snmpTrapColdstartThis object is for enabling or disabling devie Bootup event
trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.9 |
snmpTrapWarmstartThis object is for enabling or disabling devie bootup event
trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.1.10 |
snmpView OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.3 |
snmpViewTableThe table of snmp view tree. SEQUENCE OF SnmpViewEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.3.1 |
snmpViewEntryThe list of snmp view tree entry. SnmpViewEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.3.1.1 |
snmpViewNameThe human readable name for a family of view subtrees.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.3.1.1.1 |
snmpViewSubtreeThe MIB subtree which when combined with the
corresponding instance of vacmViewFamilyMask
defines a family of view subtrees.ro OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.3.1.1.2 |
snmpViewTypeIndicates whether the corresponding instances of
vacmViewFamilySubtree and vacmViewFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.3.1.1.3 |
snmpViewStatusThe status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.3.3.1.1.4 |
snmpCommunity OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.4 |
snmpCommunityTableThe table of snmp community. SEQUENCE OF SnmpCommunityEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1 |
snmpCommunityEntryThe list of snmp community entry. SnmpCommunityEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1 |
snmpCommNameThe unique index value of a row in this table.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1.1 |
snmpCommKeyTypeKey Type.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1.2 |
snmpCommViewNameSNMP Community Settings View Name.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1.3 |
snmpCommAccessRightSNMP Community Settings Key Type.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1.4 |
snmpCommIPAccListNameSNMP Community Settings IP Access-List Name.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1.5 |
snmpCommStatusThe status of this conceptual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.3.4.1.1.6 |
snmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.5 |
snmpGroupTableThe table of snmp group. SEQUENCE OF SnmpGroupEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1 |
snmpGroupEntryThe list of snmp group entry. SnmpGroupEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1 |
snmpGroupNameThe name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.1 |
snmpGroupSecurityModelIn order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.2 |
snmpGroupSecurityLevelThe minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.
If multiple entries are equally indexed except for
this vacmAccessSecurityLevel index, then the entry
which has the highest value for
vacmAccessSecurityLevel is selected.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.3 |
snmpGroupReadViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.4 |
snmpGroupWriteViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.5 |
snmpGroupNotifyViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.6 |
snmpGroupIpListNameSNMP Group Settings IP Address-List Name.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.7 |
snmpGroupStatusThe status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.3.5.1.1.8 |
snmpEngineIDSNMP Engine ID Local Settings.rw SnmpEngineID (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.139.3.1.3.3.6 |
snmpUser OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.7 |
snmpUserTableThe table of snmp user. SEQUENCE OF SnmpUserEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1 |
snmpUserEntryThe list of snmp user entry. SnmpUserEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1 |
snmpUserNameA human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.1 |
snmpUserVersionA human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.2 |
snmpUserGroupNameThe name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.3 |
snmpUserV3EncryptA human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.4 |
snmpUserAuthProtocolAn indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
UserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
NoAuthProtocol while the UserPrivProtocol value
in the same row is not equal to NoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the UserPrivProtocol is set
to the NoPrivProtocol value before it can set
the UserAuthProtocol value to NoAuthProtocol.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.5 |
snmpUserAuthProtocolPasswordPassword of snmp user auth protocol.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.6 |
snmpUserPrivProtocolAn indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than NoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.7 |
snmpUserPrivProtocolPasswordPassword of snmp user priv protocol.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.8 |
snmpUserAuthProtoByKeyAuth-Protocol by Key.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.9 |
snmpUserAuthProtoKeyKey of snmp user auth protocol by Key.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.10 |
snmpUserPrivProtoByKeyPriv-Protocol by Key.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.11 |
snmpUserPrivProtoKeyKey of snmp user Priv protocol by Key.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.12 |
snmpUserIpListNameSNMP User Settings IP Address-List Name.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.13 |
snmpUserStatusThe status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified,
except for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.3.7.1.1.14 |
snmpHost OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.3.8 |
snmpHostTableThe table of snmp host. SEQUENCE OF SnmpHostEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1 |
snmpHostEntryThe list of snmp host entry. SnmpHostEntry .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1 |
snmpHostAddressThis object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1.1 |
snmpHostIPTypeType of IP interface.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1.2 |
snmpHostVersionThe Level of Security to be used when generating
SNMP messages using this entry.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1.3 |
snmpHostUDPPortSNMP UDP Port (0-65535).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1.4 |
snmpHostCommunityNameThe locally arbitrary.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1.5 |
snmpHostStatusThe status of this conceptual row in the
snmpHostTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.3.3.8.1.1.6 |
mgtRMONGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4 |
rmonRisingAlarmTrapStateThis object is for enabling or disabling RMON Rising Alarm Trap.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.4.1 |
rmonFallingAlarmTrapStateThis object is for enabling or disabling RMON function Falling Alarm Trap.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.4.2 |
rmonStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.3 |
rmonStatsTableA list of Ethernet statistics entries. SEQUENCE OF RmonStatsEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1 |
rmonStatsEntryA collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1 RmonStatsEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1 |
rmonStatsIndexThe value of this object uniquely identifies this entry.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.1 |
rmonStatsDataSourceThis object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shall identify the instance of the ifIndex object,
defined in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
etherStatsStatus object is equal to valid(1).rw OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.2 |
rmonStatsOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw OwnerString .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.3 |
rmonStatsOctetsThe total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
This object can be used as a reasonable estimate of
10-Megabit ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets objects
should be sampled before and after a common interval. The
differences in the sampled values are Pkts and Octets,
respectively, and the number of seconds in the interval is
Interval. These values are used to calculate the Utilization
as follows:
Pkts * (9.6 + 6.4) + (Octets * .8)
Utilization = -
Interval * 10,000
The result of this equation is the value Utilization which
is the percent utilization of the ethernet segment on a
scale of 0 to 100 percent.ro Counter32 UNITS "Octets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.4 |
rmonStatsPktsThe total number of packets (including bad packets,
broadcast packets, and multicast packets) received.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.5 |
rmonStatsBroadcastPktsThe total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.6 |
rmonStatsMulticastPktsThe total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.7 |
rmonStatsUndersizePktsThe total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.8 |
rmonStatsOversizePktsThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.9 |
rmonStatsFragmentsThe total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for etherStatsFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.10 |
rmonStatsJabbersThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.11 |
rmonStatsCRCErrorsThe total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.12 |
rmonStatsCollisionsThe best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected.ro Counter32 UNITS "Collisions" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.13 |
rmonStatsDropEventsThe total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has been detected.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.14 |
rmonStatsPkts64OctetsThe total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.15 |
rmonStatsPkts65to127OctetsThe total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.16 |
rmonStatsPkts128to255OctetsThe total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.17 |
rmonStatsPkts256to511OctetsThe total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.18 |
rmonStatsPkts512to1023OctetsThe total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.19 |
rmonStatsPkts1024to1518OctetsThe total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.20 |
rmonStatsStatusThe status of this etherStats entry.rw RmonStatus .1.3.6.1.4.1.171.10.139.3.1.3.4.3.1.1.21 |
rmonHistory OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.4 |
rmonHistoryControlTableA list of history control entries. SEQUENCE OF RmonHistoryControlEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1 |
rmonHistoryControlEntryA list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2 RmonHistoryControlEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1 |
rmonHistoryControlIndexAn index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.1 |
rmonHistoryControlDataSourceThis object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In order to identify
a particular interface, this object shall identify
the instance of the ifIndex object, defined
in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1).rw OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.2 |
rmonHistoryControlBucketsRequestedThe requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.
When this object is created or modified, the probe
should set historyControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.3 |
rmonHistoryControlBucketsGrantedThe number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
historyControlEntry.
When the associated historyControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources. The
probe must not lower this value except as a result
of a modification to the associated
historyControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object. In this case, at the
end of each sampling interval, a new bucket will
be added to the media-specific table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this historyControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the media-specific table associated with this
historyControlEntry. Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value greater
than the current value, the number of associated media-
specific entries may be allowed to grow.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.4 |
rmonHistoryControlIntervalThe interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager will
take into account the possibility of overflow in any of
the associated counters. It is important to consider the
minimum time in which any counter could overflow on a
particular media type and set the historyControlInterval
object to a value less than this interval. This is
typically most important for the 'octets' counter in any
media-specific table. For example, on an Ethernet
network, the etherHistoryOctets counter could overflow
in about one hour at the Ethernet's maximum
utilization.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.5 |
rmonHistoryControlOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw OwnerString .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.6 |
rmonHistoryControlStatusThe status of this historyControl entry.
Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1).rw RmonStatus .1.3.6.1.4.1.171.10.139.3.1.3.4.4.1.1.7 |
rmonHistoryTableA list of Ethernet history entries. SEQUENCE OF RmonHistoryEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2 |
rmonHistoryEntryAn historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
historyControlEntry which set up the parameters for
a regular collection of these samples. As an example, an
instance of the etherHistoryPkts object might be named
etherHistoryPkts.2.89 RmonHistoryEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1 |
rmonHistoryIndexThe history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of historyControlIndex.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.1 |
rmonHistorySampleIndexAn index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same historyControlEntry.
This index starts at 1 and increases by one
as each new sample is taken.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.2 |
rmonHistoryOctetsThe total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).ro Counter32 UNITS "Octets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.3 |
rmonHistoryPktsThe number of packets (including bad packets)
received during this sampling interval.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.4 |
rmonHistoryBroadcastPktsThe number of good packets received during this
sampling interval that were directed to the
broadcast address.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.5 |
rmonHistoryMulticastPktsThe number of good packets received during this
sampling interval that were directed to a
multicast address. Note that this number does not
include packets addressed to the broadcast address.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.6 |
rmonHistoryUtilizationThe best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.7 |
rmonHistoryUndersizePktsThe number of packets received during this
sampling interval that were less than 64 octets
long (excluding framing bits but including FCS
octets) and were otherwise well formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.8 |
rmonHistoryOversizePktsThe number of packets received during this
sampling interval that were longer than 1518
octets (excluding framing bits but including
FCS octets) but were otherwise well formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.9 |
rmonHistoryFragmentsThe total number of packets received during this
sampling interval that were less than 64 octets in
length (excluding framing bits but including FCS
octets) had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for rmonHistoryFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.10 |
rmonHistoryJabbersThe number of packets received during this
sampling interval that were longer than 1518 octets
(excluding framing bits but including FCS octets),
and had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or
a bad FCS with a non-integral number of octets
(Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.11 |
rmonHistoryCRCErrorsThe number of packets received during this
sampling interval that had a length (excluding
framing bits but including FCS octets) between
64 and 1518 octets, inclusive, but had either a bad Frame
Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number
of octets (Alignment Error).ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.12 |
rmonHistoryCollisionsThe best estimate of the total number of collisions
on this Ethernet segment during this sampling
interval.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected.ro Counter32 UNITS "Collisions" .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.13 |
rmonHistoryDropEventsThe total number of events in which packets
were dropped by the probe due to lack of resources
during this sampling interval. Note that this number
is not necessarily the number of packets dropped, it
is just the number of times this condition has been
detected.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.3.4.4.2.1.14 |
rmonAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.5 |
rmonAlarmTableA list of alarm entries. SEQUENCE OF RmonAlarmEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1 |
rmonAlarmEntryA list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8 RmonAlarmEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1 |
rmonAlarmIndexAn index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.1 |
rmonAlarmIntervalThe interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 UNITS "Seconds" .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.2 |
rmonAlarmVariableThe object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely
in terms of the contents of MIB views, no access
control mechanism exists that can restrict the value of
this object to identify only those objects that exist
in a particular MIB view. Because there is thus no
acceptable means of restricting the read access that
could be obtained through the alarm mechanism, the
probe must only grant write access to this object in
those views that have read access to all objects on
the probe.
During a set operation, if the supplied variable name is
not available in the selected MIB view, a badValue error
must be returned. If at any time the variable name of
an established alarmEntry is no longer available in the
selected MIB view, the probe must change the status of
this alarmEntry to invalid(4).
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.3 |
rmonAlarmSampleTypeThe method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.4 |
rmonAlarmValueThe value of the statistic during the last sampling
period. For example, if the sample type is deltaValue,
this value will be the difference between the samples
at the beginning and end of the period. If the sample
type is absoluteValue, this value will be the sampled
value at the end of the period.
This is the value that is compared with the rising and
falling thresholds.
The value during the current sampling period is not
made available until the period is completed and will
remain available until the next period completes.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.5 |
rmonAlarmStartupAlarmThe alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or risingOrFallingAlarm(3), then a single
rising alarm will be generated. If the first sample
after this entry becomes valid is less than or equal
to the fallingThreshold and alarmStartupAlarm is equal
to fallingAlarm(2) or risingOrFallingAlarm(3), then a
single falling alarm will be generated.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.6 |
rmonAlarmRisingThresholdA threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is greater than or
equal to this threshold and the associated
alarmStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
alarmFallingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.7 |
rmonAlarmFallingThresholdA threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is less than or
equal to this threshold and the associated
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
alarmRisingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.8 |
rmonAlarmRisingEventNumberThe index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.9 |
rmonAlarmFallingEventNumberThe index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.10 |
rmonAlarmOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw OwnerString .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.11 |
rmonAlarmStatusThe status of this alarm entry.rw RmonStatus .1.3.6.1.4.1.171.10.139.3.1.3.4.5.1.1.12 |
rmonEvent OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.4.6 |
rmonEventTableA list of events to be generated. SEQUENCE OF RmonEventEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1 |
rmonEventEntryA set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6 RmonEventEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1 |
rmonEventIndexAn index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.1 |
rmonEventDescriptionA comment describing this event entry.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.2 |
rmonEventTypeThe type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management stations.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.3 |
rmonEventCommunityIf an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string.rw OwnerString .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.4 |
rmonEventOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.
If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connected
management stations should retrieve those log entries,
as they may have significance to all management stations
connected to this devicerw OwnerString .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.5 |
rmonEventStatusThe status of this event entry.
If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent.rw RmonStatus .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.6 |
rmonEventLastTimeSentThe value of sysUpTime at the time this event
entry last generated an event. If this entry has
not generated any events, this value will be
zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.139.3.1.3.4.6.1.1.7 |
rmonLogTableA list of events that have been logged. SEQUENCE OF RmonLogEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.6.2 |
rmonLogEntryA set of data describing an event that has been
logged. For example, an instance of the logDescription
object might be named logDescription.6.47 RmonLogEntry .1.3.6.1.4.1.171.10.139.3.1.3.4.6.2.1 |
rmonLogEventIndexThe event entry that generated this log
entry. The log identified by a particular
value of this index is associated with the same
eventEntry as identified by the same value
of eventIndex.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.6.2.1.1 |
rmonLogIndexAn index that uniquely identifies an entry
in the log table amongst those generated by the
same eventEntries. These indexes are
assigned beginning with 1 and increase by one
with each new log entry. The association
between values of logIndex and logEntries
is fixed for the lifetime of each logEntry.
The agent may choose to delete the oldest
instances of logEntry as required because of
lack of memory. It is an implementation-specific
matter as to when this deletion may occur.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.4.6.2.1.2 |
rmonLogTimeThe value of sysUpTime when this log entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.139.3.1.3.4.6.2.1.3 |
rmonLogDescriptionAn implementation dependent description of the
event that activated this log entry.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.3.4.6.2.1.4 |
mgtTelnetWebGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.5 |
telnetStateEnable/Disable management Telnetsetting mechanism.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.5.1 |
telnetPortThe value is for setting telnet's UDP Port.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.5.2 |
webStateThis object is for Enabled(1) or Disabled(2) Web state in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.5.3 |
webPortWeb Server Port Number.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.5.4 |
mgtSessionTimeoutGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.6 |
sessionTimeoutWebSession Timeout. Web Session Timeout (60-36000)sec.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.6.1 |
sessionTimeoutTelnetSession Timeout. Telnet Session Timeout (0-1439)min.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.3.6.2 |
mgtDDPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.3.14 |
ddpStatusEnable/Disable DDP function.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.14.1 |
ddpReportTimeSet DDP report time seconds.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.14.2 |
ddpTableDefine sysDDPTable for per port settings. SEQUENCE OF DdpEntry .1.3.6.1.4.1.171.10.139.3.1.3.14.3 |
ddpEntryDefine sysDDPTable for per port settings. DdpEntry .1.3.6.1.4.1.171.10.139.3.1.3.14.3.1 |
ddpPortThis object indicates the port index.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.3.14.3.1.1 |
ddpPortStatusThis object indicates DDP status is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.3.14.3.1.2 |
dlinkL2Features OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4 |
l2FDBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1 |
fdbStaticFDB OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1.1 |
fdbUnicastStaticFDB OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1 |
fdbUnicastStaticFDBTableUnicast Static FDB . SEQUENCE OF FdbUnicastStaticFDBEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1 |
fdbUnicastStaticFDBEntryUnicast Static FDB . FdbUnicastStaticFDBEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1.1 |
fdbUnicastStaticFDBVIDUnicast Static FDB. VID (1-4094).ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1.1.1 |
fdbUnicastStaticFDBMACAddrUnicast Static FDB. MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1.1.2 |
fdbUnicastStaticFDBPortUnicast Static FDB. port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1.1.3 |
fdbUnicastStaticFDBStateThis object indicates the status of this entry.
permanent(1) - this entry is currently in use
and will remain so after the next reset of
the bridge.
permanentDrop(2) - This entry will filter the packet with the specified
MAC address as the source MAC or as the destination MAC.
The entry is currently in use and will remain so after the
next reboot of the device.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1.1.4 |
fdbUnicastStaticFDBRowStatusThis object indicates the status of fdbUnicastStaticFDBTable
to which a frame with a specific unicast
address will be flooded in the event that it has not
been learned. To set fdbUnicastStaticFDBPort,
we have to set the rowstatus as 'NOT_IN_SERVICE' and
set the appropriate port in the
fdbUnicastStaticFDBPort and set the rowstatus as
'ACTIVE' to make the port available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.1.1.1.1.5 |
fdbMulticastStaticFDB OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2 |
fdMulticastStaticFDBTableMulticast Static FDB . SEQUENCE OF FdbMulticastStaticFDBEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2.1 |
fdbMulticastStaticFDBEntryMulticast Static FDB . FdbMulticastStaticFDBEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2.1.1 |
fdbMulticastStaticFDBVIDMulticast Static FDB. VID (1-4094).ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2.1.1.1 |
fdbMulticastStaticFDBMACAddrMulticast Static FDB. MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2.1.1.2 |
fdbMulticastStaticFDBEgressPortsMulticast Static FDB. egress PortList.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2.1.1.3 |
fdbMulticastStaticFDBRowStatusThis object indicates the status of fdMulticastStaticFDBTable
to which a frame with a specific multicast
address will be flooded in the event that it has not
been learned. To set fdbMulticastStaticFDBEgressPorts,
we have to set the rowstatus as 'NOT_IN_SERVICE' and
set the appropriate portlist in the
fdbMulticastStaticFDBEgressPorts and set the rowstatus as
'ACTIVE' to make the port available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.1.2.1.1.4 |
fdbMACAddressTableSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1.2 |
fdbMACAddrGlobalSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1.2.1 |
fdbMACAddrAgingTimeMAC Address Table Settings. Global Settings. Aging Time (0, 10-1000000)rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.1.2.1.1 |
fdbMACAddrAgingDestinationHitMAC Address Table Settings. Global Settings. Aging Destination Hitrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.1.2.1.2 |
fdbMACAddressLearningTableMulticast Static FDB . SEQUENCE OF FdbMACAddressLearningEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.2.2 |
fdbMACAddressLearningEntryMulticast Static FDB . FdbMACAddressLearningEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.2.2.1 |
fdbMACAddressLearningPortMAC Address Learning. port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.1.2.2.1.1 |
fdbMACAddressLearningStateMAC Address Learning. State.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.1.2.2.1.2 |
fdbMACAddressTableMulticast Static FDB . SEQUENCE OF FdbMACAddressTableEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.3 |
fdbMACAddressTableEntryMulticast Static FDB . FdbMACAddressTableEntry .1.3.6.1.4.1.171.10.139.3.1.4.1.3.1 |
fdbMACAddrTabVIDMAC Address Table. VID (1-4094).ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.1.3.1.1 |
fdbMACAddrTabMACAddrMAC Address Table. MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.3.1.2 |
fdbMACAddrTabTypeMAC Address Table. Type.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.1.3.1.3 |
fdbMACAddrTabPortThe port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dynamicFdbMacAddr has
been seen.If the port is LA port, will show 'po' before port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.3.1.4 |
fdbMACAddressClear OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.1.4 |
fdbClearIdFdb clear object identification:
If fdbClearAction is clear by port, then this value is a port number;
If fdbClearAction is clear by vlan, then this value is a port vlan id;
If fdbClearAction is clear by MAC, then this value is a MAC address;
otherwise this value is not used.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.4.1.4.1 |
fdbClearMacFdb clear object identification:
If fdbClearAction is clear by MAC, then this value is a MAC address;
otherwise this value is not used.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.1.4.2 |
fdbClearActionFdb clear action identification:
ClearAll to clear all fdb entries;
ClearClearAllByVlanId clear all fdb entries that belong to specified vlan id;
ClearAllByPort clear all fdb entries that belong to specified port;
ClearAllByMAC clear all fdb entries that belong to specified MAC addressrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.1.4.3 |
l2Dot1qVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.2 |
dot1qVlanAsyOnOffEnable/Disable IEEE 802.1Q Asymmetric VLANrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.2.1 |
dot1qVlanTableA table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset. SEQUENCE OF Dot1qVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.2.2 |
dot1qVlanEntryInformation for a VLAN configured into the
device by (local or network) management. Dot1qVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.2.2.1 |
dot1qVlanidVlan id used to identify the VLAN.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.2.2.1.1 |
dot1qVlanNameAn administratively assigned string, which may be used
to identify the VLAN.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.2.2.1.2 |
dot1qVlanEgressPortsThe set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.2.2.1.3 |
dot1qVlanUntaggedPortsThe set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.2.2.1.4 |
dot1qVlanRowStatusThe status of a row in sysDot1qVlanTable. By setting this object, new
entries can be created in sysDot1qVlanTable and existing entries can be
removed from sysDot1qVlanTable. It can be used as specified in the SNMP
v2 standard.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.2.2.1.99 |
dot1qVlanPortTableA table containing per port control and status
information for VLAN configuration in the device. SEQUENCE OF Dot1qVlanPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.2.3 |
dot1qVlanPortEntryInformation controlling VLAN configuration for a port
on the device. Dot1qVlanPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1 |
dot1qVlanPortIndexPort index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.1 |
dot1qVlanPortVlanModeThis is used to specify the VLAN mode for the port.
Use the no command to reset the VLAN mode to the
default setting.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.2 |
dot1qVlanPortAcceptableFrameTypeThis is used to set the acceptable types of frames by
a port. Use the no form of the command to reset to the
default setting.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.3 |
dot1qVlanPortIngressCheckingThis is used to enable ingress checking for frames received
by a port. Use the no command to disable the ingress check.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.4 |
dot1qVlanPortNativeVlanStatusThis object indicates whether enable tagging or untagging mode
of the native VLAN on the interface.
This value is meaningful only to TRUNK port.Access port and hybrid
port MUST keep disabled.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.5 |
dot1qVlanPortNativeVlanIdThe VLAN-ID assigned to untagged frames received on this port.
The port in native VLAN will also been set as untagged as default setting.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.6 |
dot1qVlanPortTagVlanListThe tagged VLAN list which the port belongs to.rw VlanList .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.7 |
dot1qVlanPortUntagVlanListThe untagged VLAN list which the port belongs to.rw VlanList .1.3.6.1.4.1.171.10.139.3.1.4.2.3.1.8 |
l2STPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3 |
stpProtocolSetting OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3.1 |
stpStatusThe administrative module status requested by management for the STP
Module. This enables or disables STP in the system. A value of 'enabled'
(1) indicates that STP must be enabled in the device on all the ports.
A value of 'disabled'(2) indicates that STP must be disabled in the
device on all the ports.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.1.1 |
stpNewRootTrapStateThis object is for enabling or disabling STP new root Trap.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.1.2 |
stpTopologyChangeTrapStateThis object is for enabling or disabling STP topology change Trap.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.1.3 |
stpVersionThe version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
indicates the Multiple Spanning Tree Protocol Specified
in IEEE 802.1s.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.1.4 |
stpBridgePriorityThe Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.1.5 |
stpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.171.10.139.3.1.4.3.1.6 |
stpBridgeHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second.rw Timeout .1.3.6.1.4.1.171.10.139.3.1.4.3.1.7 |
stpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.171.10.139.3.1.4.3.1.8 |
stpMaxHopCountIndicates the Maximum Hop Count value. One-hundredth of the
configured value will be set as Max Hop Count.
An agent may return a badValue error if a set is attempted
to a value which is not a multiples of hundred.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.1.9 |
stpTxHoldCountThe value used by the Port Transmit state machine to limit
the maximum transmission rate.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.1.10 |
stpPortConfigurationTableThis table contains Common Spanning Tree Port
Information. SEQUENCE OF StpPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.2 |
stpPortConfigurationEntryA list of information maintained by every port for
Common Spanning tree. StpPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1 |
stpPortThe Port number of the port for which this entry contains
spanning tree information.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.1 |
stpPortAdminPathCostThe administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the port. If the default Path
Cost is being used, this object returns '0' when read.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.2 |
stpPortPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.3 |
stpPortStateCurrent state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.4 |
stpPortGuardRootA Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Port after the Root Port has been selected. This
parameter should be FALSE by default. If set it can cause lack of
spanning tree connectivity. It is set by a network administrator to
prevent bridges external to a core region of the network influencing
the spanning tree active topology, possibly because those bridges are
not under the full control of the administrator.
This administrator configuration is also known as 'Root Guard'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.5 |
stpPortLinkTypeThe administrative point-to-point status of the LAN segment
attached to this port. A value of p2p(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of shared(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.6 |
stpPortOperLinkTypeThe operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the stpPortLinkType object.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.7 |
stpPortFastThe administrative value of the Edge Port parameter. A
value of edge(0) indicates that this port should be
assumed as an edge-port and a value of disabled(1) indicates
that this port should be assumed as a non-edge-port.auto
indicates that detection of a port as Edge Port happens automaticallyrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.8 |
stpPortOperFastThe operational value of the Edge Port parameter. The
object is initialized to the value of
stpPortFast and is set FALSE on reception
of a BPDU.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.9 |
stpPortTCNFilterA Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause temporary loss of connectivity after changes in
a spanning trees active topology as a result of persistent
incorrectly learnt station location information. It is set by a
network administrator to prevent bridges external to a core region of
the network causing address flushing in that region, possibly because
those bridges are not under the full control of the administrator or
MAC_Operational for the attached LANs transitions frequently.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.10 |
stpPortFowardBPDUThis object is for enabling or disabling forward BPDU.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.11 |
stpPortPriorityThe four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.12 |
stpPortHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second.rw Timeout .1.3.6.1.4.1.171.10.139.3.1.4.3.2.1.13 |
mstConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3.3 |
mstiConfigurationNameThe Name for the Region's configuration. By Default
Region Name will be equal to the Bridge Mac Address.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.4.3.3.1 |
mstiRevisionLevelVersion of the MST Region.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.3.2 |
mstMstiConfigDigestThe Configuration Digest value for this Region.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.3 |
mstVlanMstiMappingTableThis table contains one entry for each instance of MSTP.
This table maintains context ID as one more index to
support Multiple Instances. SEQUENCE OF MstVlanMstiMappingEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4 |
mstVlanMstiMappingEntryA conceptual row containing the status of the MSTP instance. MstVlanMstiMappingEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1 |
mstInstanceIndexAn arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.1 |
mstSetVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to map for this
Instance. If the VlanId to Instance Mapping has to be known
then any one of the VlanMapped object should be used.If a
vlan is already mapped to this Instance, it may not be mapped
again. This object is used only for SET operation.
GET Operation returns null values.rw OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.2 |
mstResetVlanListA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
The set of vlans configured by management to unmap from this
Instance. A vlan may not be unmapped from this instance if
it is not already mapped to this Instance. This object is
used only for SET operation.GET Operation returns null values.rw OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.3 |
mstInstanceVlanMappedA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.4 |
mstInstanceVlanMapped2kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.5 |
mstInstanceVlanMapped3kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.6 |
mstInstanceVlanMapped4kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex values up to 4095.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.3.3.4.1.7 |
stpInstance OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3.4 |
mstCistBridgePriorityThe writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.4.1 |
mstCistStatusThe administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.4.2 |
mstCistPortDesignatedRootThe unique Bridge Identifier of the bridge recorded as the
CIST Root in the configuration BPDUs transmitted.ro BridgeId .1.3.6.1.4.1.171.10.139.3.1.4.3.4.3 |
mstCistRegionalRootThe bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.171.10.139.3.1.4.3.4.4 |
mstCistPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId .1.3.6.1.4.1.171.10.139.3.1.4.3.4.5 |
mstMstiBridgeTableTable containing Bridge Information specific to Spanning
Tree Instance. This table maintains context ID as one
more index to support Multiple Instances. SEQUENCE OF MstMstiBridgeEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6 |
mstMstiBridgeEntryEntry indicating the Bridge Information. MstMstiBridgeEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1 |
mstMstiInstanceIndexSpanning Tree Instance to which the information belongs.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.1 |
mstMstiBridgePriorityThe writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.2 |
mstMstiStatusThe administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.3 |
mstMstiPortDesignatedRootThe unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted.ro BridgeId .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.4 |
mstMstiBridgeRegionalRootMSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this nodero BridgeId .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.5 |
mstMstiPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.6 |
mstMstiTopChangesThe number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.3.4.6.1.7 |
stpInstancePortTable OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3.5 |
mstCistPortTableThis table contains Common Spanning Tree Port
Information. SEQUENCE OF MstCistPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1 |
mstCistPortEntryA list of information maintained by every port for
Common Spanning tree. MstCistPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1 |
mstCistPortThe Port number of the port for which this entry contains
spanning tree information.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.1 |
mstCistPortAdminPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.2 |
mstCistPortPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.3 |
mstCistPortPriorityThe four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.4 |
mstCistPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.5 |
mstCistCurrentPortRoleCurrent Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.6 |
mstCistPortProtocolMigrationIndicates the Protocol migration state of this Port.
writing TRUE(1) to this object forces this port to transmit protocol BPDU
Any other operation on this object has no effect.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.3.5.1.1.7 |
mstMstiPortTableThis table contains Spanning Tree Instance Specific Port
Information. SEQUENCE OF MstMstiPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2 |
mstMstiPortEntryA list of information maintained by every port for each
and every spanning tree instance. MstMstiPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1 |
mstMstiPortThe Port number of the port for which this entry contains
spanning tree information.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.1 |
mstMstiPortInstanceIndexAn arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.2 |
mstMstiPortAdminPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.3 |
mstMstiPortPathCostThe contribution of this port to the path cost of
paths towards the MSTI Root which include this port.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.4 |
mstMstiPortPriorityThe four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priority must be in steps of 16.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.5 |
mstMstiPortStateCurrent state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.6 |
mstMstiCurrentPortRoleCurrent Port Role of the port for this spanning
tree instance.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.3.5.2.1.7 |
stpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3.6 |
stpTrapsList OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.3.6.0 |
stpNewRootTrapGenerated whenever a new root bridge is selected in the topology NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.4.3.6.0.1 |
stpTopologyChgTrapGenerated when topology change is detected NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.4.3.6.0.2 |
l2LBDGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.4 |
lbdGlobalSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.4.1 |
lbdStateEnable/Disable Loopback detection function.
The Loopback Detection function is used to detect the loop created
by a specific port while Spanning Tree Protocol (STP) is not
enabled in the network, especially when the down links are hubs
or unmanaged switchs.The Switch will automatically shutdown the
port and sends a log to the administrator.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.4.1.1 |
lbdModeLoopback detection function mode.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.4.1.2 |
lbdEnabledVLANIDListSet Enabled VLAN ID List .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.4.1.3 |
lbdIntervalSet a Loop detection Interval between 1 and 32767 seconds.
The default is 2 seconds.
This time interval to be used at counting time seconds to
resend the CTP packet automatically.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.4.1.4 |
lbdTrapStateEnable/Disable Loopback detection trap
function.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.4.1.5 |
lbdActionLoopback detection function action.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.4.1.6 |
lbdPortSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.4.2 |
lbdportTableA table to control Loopback detection features either for
the entire switch or for each interface in the switch. SEQUENCE OF LbdportEntry .1.3.6.1.4.1.171.10.139.3.1.4.4.2.1 |
lbdportEntryAn entry appears in this table for each interface
in the system. LbdportEntry .1.3.6.1.4.1.171.10.139.3.1.4.4.2.1.1 |
lbdportIndexThe interface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.4.2.1.1.1 |
lbdportStateProvides control to per port enable or disable the loopback detection
function. Default is disabled.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.4.2.1.1.2 |
lbdportResultThe loop Result for this port.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.4.2.1.1.3 |
lbdportTimeLeftLoopback Detection Port Settings Time Left (sec).ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.4.2.1.1.4 |
lbdVlanSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.4.3 |
lbdVlanLoopTableA table to display Loopback detection features by vlan
mode. SEQUENCE OF LbdVlanLoopEntry .1.3.6.1.4.1.171.10.139.3.1.4.4.3.1 |
lbdVlanLoopEntryAn entry appears in this table for each interface
in the system. LbdVlanLoopEntry .1.3.6.1.4.1.171.10.139.3.1.4.4.3.1.1 |
lbdVlanLoopIndexDisplay port lists loop status by vlan.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.4.3.1.1.1 |
lbdVlanLoopPortsDisplay port lists loop status by vlan.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.4.3.1.1.2 |
lbdTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.4.4 |
lbdTrapsList OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.4.4.0 |
lbdLoopOccurThis is a trap that will send to snmp manager,and it will be generated when loop is occured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.4.4.4.0.1 |
lbdLoopRecoverThis is a trap that will send to snmp manager,and it will be generated when port is recovering. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.4.4.4.0.2 |
l2LAGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.5 |
laSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.5.1 |
laSystemPriorityThe priority value assigned to System.
This 16-bit value is read-only.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.1.1 |
laSystemLoadBalanceAlgorithmLink selection policy to be used by the port-channel.
Selection policy isid implies selection based on Service-instance
and is applicable only in Provider BackBone bridge.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.1.2 |
laActorSystemIDA 6-octet read-only MAC address value used as a unique
identifier for the System.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.5.1.3 |
laChannel OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.5.2 |
laPortChannelTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF LaPortChannelEntry .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1 |
laPortChannelEntryThere is one entry in this table for each created port-channel port LaPortChannelEntry .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1 |
laPortChannelIfIndexThe ifIndex of the port-channel(Aggregator's interface index).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1.1 |
laPortChannelMaxPorts.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1.2 |
laPortChannelMemberNumber.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1.3 |
laPortChannelMemberListMember Port list of the port channel. Add the ports as a
aggregation member associated of a port-channel.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1.4 |
laSystemChannelGroupIDThe priority value assigned to System.
This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1.5 |
laPortChannelModeCurrent Operating Channel Mode of the port
active(1) - it will always send frames along the configured links.
passive(2) - If the actor and partner are both in passive mode, they do not
exchange LACP packets.
on(3) - force the port to enable channeling (Manual).
disabled(4) - channeling is disabled.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.2.1.1.6 |
laChannelDetailTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF LaChannelDetailEntry .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2 |
laChannelDetailEntryThere is one entry in this table for each created port-channel port LaChannelDetailEntry .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1 |
laChannelDetailPortThe ifIndex of the port-channel(Aggregator's interface index).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1.1 |
laChannelDetailLACPTimeoutThis object indicates LACP_Timeout to this Aggregation Port.
short(1) - LACP Timeout 3 seconds.
long (2) - LACP Timeout 90 seconds.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1.2 |
laChannelDetailWorkingModeCurrent Operating Channel Mode of the port
active(1) - it will always send frames along the configured links.
passive(2) - If the actor and partner are both in passive mode, they do not
exchange LACP packets.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1.3 |
laChannelDetailLACPStateThis read-only object is used to display the port state in aggregation.
upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The port is capable of joining in
aggregation group, when any of the ports in
aggregation group goes down.
down(2) - The port is operationally down in lower layers.
or the port is operational in lower layers
but temporarily not able to participate
in aggregation because of different partner
information in the same group.
upIndividual(3) - The port is operating individually and
is not taking part in aggregation.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1.4 |
laChannelDetailPortPriorityPort Channel Detail Information Port Priority.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1.5 |
laChannelDetailPortNumberPort Channel Detail Information Port number.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.2.1.6 |
laChannelNeighborTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF LaChannelNeighborEntry .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3 |
laChannelNeighborEntryThere is one entry in this table for each created port-channel port LaChannelNeighborEntry .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1 |
laChannelNeighborPortThe ifIndex of the port-channel(Aggregator's interface index).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.1 |
laChannelNeighborSystemPriorityPort Channel Neighbor Information Partner System Priority.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.2 |
laChannelNeighborSystemIDPort Channel Neighbor Information Partner System ID.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.3 |
laChannelNeighborPortNoPort Channel Detail Information Port number.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.4 |
laChannelNeighborLACPTimeoutPort Channel Neighbor Information Partner LACP Timeout.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.5 |
laChannelNeighborWorkingModePort Channel Neighbor Information Partner LACP Timeout.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.6 |
laChannelNeighborPortPriorityPort Channel Detail Information Port Priority.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.4.5.2.3.1.7 |
l2MulticastCtrlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6 |
igsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6.1 |
igsStatusEnables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.1.1 |
igsClearIgmpSnoopByVlanIdThis object indicates the VLAN ID on which the IGMP snooping
counters will be cleared.
When read, the special value 0 is returned.rw VlanIdOrNone .1.3.6.1.4.1.171.10.139.3.1.4.6.1.3 |
igsVlan OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6.2 |
igsVlanFilterTableThis table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system. SEQUENCE OF IgsVlanFilterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1 |
igsVlanFilterEntryContains snooping status , version and fast leave
configuration for a specific VLAN. IgsVlanFilterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1 |
igsVlanFilterVlanIdIndex of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.1 |
igsVlanSnoopStatusThis object allows you to enable/disable IGS function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.2 |
igsVlanFastLeaveEnables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.4 |
igsVlanQuerierIndicates whether the switch is configured as a querier in the VLANro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.7 |
igsVlanCfgQuerierThe snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.8 |
igsVlanQuerierVersionThis object allows you to set igmp version function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.9 |
igsVlanQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.10 |
igsVlanMaxResponseTimeThe maximum query response time advertised General
queries on this interface.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.11 |
igsVlanRobustnessValueWhen the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'RobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.12 |
igsVlanLastMemberQueryIntervalrw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.1.1.13 |
igsVlanMulticastGroupTableThis table contains MAC based multicast forwarding
information. SEQUENCE OF IgsVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2 |
igsVlanMulticastGroupEntryThis table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded. IgsVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1 |
igsVlanMulticastGroupVlanIdVLAN ID pertaining to the Multicast forwarding entryro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.1 |
igsVlanMulticastGroupIpAddressMulticast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format.ro IpAddress .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.2 |
igsVlanMulticastGroupReceiverPortIndexThe interface on which the multicast group address is learnt.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.3 |
igsVlanMulticastGroupReceiverSrcAddrThe IP address of the multicast receiver that has sent
the multicast report to join this group.ro IpAddress .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.4 |
igsVlanMulticastGroupMacAddressMulticast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.5 |
igsVlanMulticastGroupExpro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.7 |
igsVlanMulticastGroupPortListList of ports onto which the multicast data
packets destined for this group will be forwarded.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.2.2.1.8 |
igsVlanStaticMcastGrpTableThis table contains IP based multicast forwarding
information. SEQUENCE OF IgsVlanStaticMcastGrpEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.3 |
igsVlanStaticMcastGrpEntryThis table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded. IgsVlanStaticMcastGrpEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.3.1 |
igsVlanStaticMcastGrpVlanIdVLAN ID pertaining to the Multicast forwarding entryro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.3.1.1 |
igsVlanStaticMcastGrpGroupAddressIP/IPv6 multicast group addressro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.6.2.3.1.2 |
igsVlanStaticMcastGrpPortListList of ports onto which the multicast data
packets destined for this source and group will be forwarded.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.2.3.1.3 |
igsVlanStaticMcastGrpRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.6.2.3.1.4 |
igsVlanRouterTableThis table contains the list of ports through which
a router, in a particular VLAN is reachable. SEQUENCE OF IgsVlanRouterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.4 |
igsVlanRouterEntryContains the VLAN ID and list of ports on which
routers are present in the VLAN. IgsVlanRouterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.2.4.1 |
igsVlanRouterVlanIdVLAN ID of the ports through which router is reachable.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.2.4.1.1 |
igsVlanRouterStaticPortListList of static ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.2.4.1.2 |
igsVlanRouterBlockPortListList of ports which are configured statically as blocked router
ports statically.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.2.4.1.3 |
igsVlanRouterDynamicPortListList of dynamic ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.2.4.1.4 |
igsStats OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6.3 |
igsStatsTableThis table contains snooping statistics
maintained by the switch. The statistics are
maintained on a per VLAN basis. SEQUENCE OF IgsStatsEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1 |
igsStatsEntryContains snooping statistics for a particular VLAN. IgsStatsEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1 |
igsStatsVlanIdVLAN ID for which snooping statistics are displayedro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.1 |
igsStatsIGMPv1RxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.2 |
igsStatsIGMPv1RxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.3 |
igsStatsIGMPv1TxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.4 |
igsStatsIGMPv1TxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.5 |
igsStatsIGMPv2RxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.6 |
igsStatsIGMPv2RxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.7 |
igsStatsIGMPv2RxLeavero Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.8 |
igsStatsIGMPv2TxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.9 |
igsStatsIGMPv2TxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.10 |
igsStatsIGMPv2TxLeavero Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.11 |
igsStatsIGMPv3RxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.12 |
igsStatsIGMPv3RxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.13 |
igsStatsIGMPv3TxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.14 |
igsStatsIGMPv3TxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.3.1.1.15 |
mldSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6.4 |
mldStatusEnables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.4.1 |
mldClearIgmpSnoopByVlanIdThis object indicates the VLAN ID on which the IGMP snooping
counters will be cleared.
When read, the special value 0 is returned.rw VlanIdOrNone .1.3.6.1.4.1.171.10.139.3.1.4.6.4.3 |
mldVlan OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6.5 |
mldVlanFilterTableThis table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system. SEQUENCE OF MldVlanFilterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1 |
mldVlanFilterEntryContains snooping status , version and fast leave
configuration for a specific VLAN. MldVlanFilterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1 |
mldVlanFilterVlanIdIndex of MldVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in MldVlanFilterEntry is to be done.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.1 |
mldVlanSnoopStatusThis object allows you to enable/disable IGS function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.2 |
mldVlanFastLeaveEnables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.4 |
mldVlanQuerierIndicates whether the switch is configured as a querier in the VLANro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.7 |
mldVlanCfgQuerierThe snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.8 |
mldVlanQuerierVersionThis object allows you to set igmp version function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.9 |
mldVlanQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.10 |
mldVlanMaxResponseTimeThe maximum query response time advertised General
queries on this interface.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.11 |
mldVlanRobustnessValueWhen the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'RobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.12 |
mldVlanLastListenerQueryIntervalrw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.1.1.13 |
mldVlanMulticastGroupTableThis table contains MAC based multicast forwarding
information. SEQUENCE OF MldVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2 |
mldVlanMulticastGroupEntryThis table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded. MldVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1 |
mldVlanMulticastGroupVlanIdVLAN ID pertaining to the Multicast forwarding entryro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.1 |
mldVlanMulticastGroupIpAddressMulticast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format.ro Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.2 |
mldVlanMulticastGroupReceiverPortIndexThe interface on which the multicast group address is learnt.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.3 |
mldVlanMulticastGroupReceiverSrcAddrThe IP address of the multicast receiver that has sent
the multicast report to join this group.ro Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.4 |
mldVlanMulticastGroupMacAddressMulticast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.5 |
mldVlanMulticastGroupExpro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.7 |
mldVlanMulticastGroupPortListList of ports onto which the multicast data
packets destined for this group will be forwarded.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.5.2.1.8 |
mldVlanStaticMcastGrpTableThis table contains IP based multicast forwarding
information. SEQUENCE OF MldVlanStaticMcastGrpEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.3 |
mldVlanStaticMcastGrpEntryThis table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded. MldVlanStaticMcastGrpEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.3.1 |
mldVlanStaticMcastGrpVlanIdVLAN ID pertaining to the Multicast forwarding entryro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.3.1.1 |
mldVlanStaticMcastGrpGroupAddressIP/IPv6 multicast group addressro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.6.5.3.1.2 |
mldVlanStaticMcastGrpPortListList of ports onto which the multicast data
packets destined for this source and group will be forwarded.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.5.3.1.3 |
mldVlanStaticMcastGrpRowStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.6.5.3.1.4 |
mldVlanRouterTableThis table contains the list of ports through which
a router, in a particular VLAN is reachable. SEQUENCE OF MldVlanRouterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.4 |
mldVlanRouterEntryContains the VLAN ID and list of ports on which
routers are present in the VLAN. MldVlanRouterEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.5.4.1 |
mldVlanRouterVlanIdVLAN ID of the ports through which router is reachable.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.5.4.1.1 |
mldVlanRouterStaticPortListList of static ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.5.4.1.2 |
mldVlanRouterBlockPortListList of ports which are configured statically as blocked router
ports statically.rw PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.5.4.1.3 |
mldVlanRouterDynamicPortListList of dynamic ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.ro PortList .1.3.6.1.4.1.171.10.139.3.1.4.6.5.4.1.4 |
mldStats OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.6.6 |
mldStatsTableThis table contains snooping statistics
maintained by the switch. The statistics are
maintained on a per VLAN basis. SEQUENCE OF MldStatsEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1 |
mldStatsEntryContains snooping statistics for a particular VLAN. MldStatsEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1 |
mldStatsVlanIdVLAN ID for which snooping statistics are displayedro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.1 |
mldStatsMLDv1RxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.2 |
mldStatsMLDv1RxDonero Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.3 |
mldStatsMLDv1TxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.4 |
mldStatsMLDv1TxDonero Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.5 |
mldStatsMLDv2RxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.6 |
mldStatsMLDv2TxReportro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.7 |
mldStatsRxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.8 |
mldStatsTxQueriesro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.6.6.1.1.9 |
multicastFilterVlanTableA table to control multicast filtering modes. SEQUENCE OF MulticastFilterVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.7 |
multicastFilterVlanEntryAn entry appears in this table for each interface in the mcastFiltertem.
Index to the table is the interface index of the VLAN. MulticastFilterVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.6.7.1 |
multicastFilterVlanIndexVLAN index of the VLAN for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.6.7.1.1 |
multicastFilterVlanTypeConfigures the multicast filtering modes as below :
forward -Forwards all unregistered groups.
filter -Filters all unregistered groups.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.6.7.1.2 |
l2LLDPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7 |
lldpStateThis object is used for enabling or disabling LLDP in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.1 |
lldpForwardStateThis object is used for enabling or disabling LLDP Forward State in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.2 |
lldpTrapStateThis object is used for enabling or disabling LLDP Trap State in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.3 |
lldpMEDTrapStateThis object is used for enabling or disabling LLDP-MED Trap State in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.4 |
lldpMsgTxIntervalThis object is used for LLDP packet update frequency.
The timer in units of seconds.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.5 |
lldpMsgHoldMultiplierThe time-to-live value expressed as a multiple of the
lldpMessageTxInterval object.The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,
can be expressed by the following formula: TTL = min(65535,
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier))rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.6 |
lldpReinitDelayThis object is used for LLDP Reinitialization Delay.
The timer in units of seconds.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.7 |
lldpTxDelayThe lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.8 |
lldpPortConfigTableThe table that controls LLDP frame transmission on individual
ports. SEQUENCE OF LldpPortConfigEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.10 |
lldpPortConfigEntryLLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table. LldpPortConfigEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1 |
lldpPortConfigPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpPortConfigTable. LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1.1 |
lldpPortConfigAdminStatusThe administratively desired status of the local LLDP agent.
If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it will not store any information
about the remote systems connected.
If the associated lldpPortConfigAdminStatus object has a
value of 'rxOnly(2)', then the LLDP agent will receive,
but it will not transmit LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'txAndRx(3)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's lldpPortConfigAdminStatus
becomes disabled, then the information will naturally age out.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1.2 |
lldpPortConfigSubtypeLLDP Port Settings Subtype.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1.3 |
lldpPortConfigTLVsTxEnableThe lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, lldpConfigManAddrTable.
The default value for lldpPortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1.4 |
lldpPortStatsCleartrigger port statisc clear..rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1.5 |
lldpPortNeighborCleartrigger port neighbor info clear..rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.10.1.6 |
lldpConfigManAddrTableThe table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports. SEQUENCE OF LldpConfigManAddrEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.11 |
lldpConfigManAddrEntryLLDP configuration information that specifies the set
of ports (represented as a PortList) on which the local
system management address instance will be transmitted.
Each active lldpConfigManAddrEntry must be restored from
non-volatile and re-created (along with the corresponding
lldpLocManAddrEntry) after a re-initialization of the
management system. LldpConfigManAddrEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.11.1 |
lldpConfigManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.11.1.1 |
lldpConfigManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.11.1.2 |
lldpConfigManAddrPortsTxEnableA set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on the
member ports of the lldpManAddrPortsTxEnable.
The default value for lldpConfigManAddrPortsTxEnable object
is empty binary string, which means no ports are specified
for advertising indicated management address instance.rw LldpPortList .1.3.6.1.4.1.171.10.139.3.1.4.7.11.1.3 |
lldpXdot1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.13 |
lldpXdot1Config OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1 |
lldpXdot1ConfigPortVlanTableA table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigPortVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.1 |
lldpXdot1ConfigPortVlanEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding sysLLDPPortConfigEntry)
after a re-initialization of the management system. LldpXdot1ConfigPortVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.1.1 |
lldpXdot1ConfigVlanPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.1.1.1 |
lldpXdot1ConfigPortVlanTxEnableThe lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.1.1.2 |
lldpXdot1ConfigVlanNameTableThe table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigVlanNameEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.2 |
lldpXdot1ConfigVlanNameEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.
Each active lldpXdot1ConfigVlanNameEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocVlanNameEntry) after a re-initialization of the
management system. LldpXdot1ConfigVlanNameEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.2.1 |
lldpXdot1LocConfigVlanNamePortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.2.1.1 |
lldpXdot1ConfigVlanNameTxEnableVlanListThe value that indicates whether the corresponding
Local System VLAN name instance will be transmitted on this portrw OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.2.1.2 |
lldpXdot1ConfigProtoVlanTableThe table that controls selection of LLDP Port and Protocol
VLAN ID TLV instances to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigProtoVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.3 |
lldpXdot1ConfigProtoVlanEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance will be transmitted.
This configuration object augments the lldpXdot1LocVlanEntry,
therefore it is only present along with the Port and
Protocol VLAN ID instance contained in the associated
lldpXdot1LocVlanEntry entry.
Each active lldpXdot1ConfigProtoVlanEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtoVlanEntry) after a re-initialization of
the management system. LldpXdot1ConfigProtoVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.3.1 |
lldpXdot1ConfigProtoVlanPortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.3.1.1 |
lldpXdot1ConfigProtoVlanTxEnableThe boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance will
be transmitted on the port defined by the given
lldpXdot1LocProtoVlanEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.3.1.2 |
lldpXdot1ConfigProtocolTableThe table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigProtocolEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.4 |
lldpXdot1ConfigProtocolEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.
Each active lldpXdot1ConfigProtocolEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtocolEntry) after a re-initialization of the
management system. LldpXdot1ConfigProtocolEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.4.1 |
lldpXdot1ConfigProtocolPortNumThe value of this object is used as a port index to the
lldpXdot1ConfigProtocolTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.4.1.1 |
lldpXdot1ConfigProtocolIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.4.1.2 |
lldpXdot1ConfigProtocolTxEnableThe boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.1.4.1.3 |
lldpXdot1LocalData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2 |
lldpXdot1LocTableThis table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent. SEQUENCE OF LldpXdot1LocEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.1 |
lldpXdot1LocEntryInformation about IEEE 802.1 organizationally defined
LLDP extension. LldpXdot1LocEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.1.1 |
lldpXdot1LocPortNumThe value of this object is used as a port index to the
lldpXdot1LocTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.1.1.1 |
lldpXdot1LocPortVlanIdThe integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation.ro Integer32(0|1..4094) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.1.1.2 |
lldpXdot1LocProtoVlanTableThis table contains one or more rows per Port and Protocol
VLAN information about the local system. SEQUENCE OF LldpXdot1LocProtoVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.2 |
lldpXdot1LocProtoVlanEntryPort and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol VLANs,
identified by a particular lldpXdot1LocProtoVlanId, configured
on the given port. LldpXdot1LocProtoVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.2.1 |
lldpXdot1LocProtoVlanPortNumThe value of this object is used as a port index to the
lldpXdot1LocTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.2.1.1 |
lldpXdot1LocProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPVID) or does
not support port and protocol VLAN operation.ro Integer32(0|1..4094) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.2.1.2 |
lldpXdot1LocProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.2.1.3 |
lldpXdot1LocProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.2.1.4 |
lldpXdot1LocVlanNameTableThis table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent. SEQUENCE OF LldpXdot1LocVlanNameEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.3 |
lldpXdot1LocVlanNameEntryVLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port. LldpXdot1LocVlanNameEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.3.1 |
lldpXdot1LocVlanNamePortNumThe value of this object is used as a port index to the
lldpXdot1LocVlanNameTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.3.1.1 |
lldpXdot1LocVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.3.1.2 |
lldpXdot1LocVlanNameThe string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.
This object should contain the value of the dot1QVLANStaticName
object (defined in IETF RFC 2674) identified with the given
lldpXdot1LocVlanId.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.3.1.3 |
lldpXdot1LocProtocolTableThis table contains one or more rows per protocol identity
information on the local system known to this agent. SEQUENCE OF LldpXdot1LocProtocolEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.4 |
lldpXdot1LocProtocolEntryInformation about particular protocols that are accessible
through the given port component.
There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum. LldpXdot1LocProtocolEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.4.1 |
lldpXdot1LocProtocolPortNumThe value of this object is used as a port index to the
lldpXdot1LocProtocolTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.4.1.1 |
lldpXdot1LocProtocolIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.4.1.2 |
lldpXdot1LocProtocolIdThe octet string value used to identify the protocols
associated with the given port of the local system.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.13.2.4.1.3 |
lldpXdot1RemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3 |
lldpXdot1RemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port. SEQUENCE OF LldpXdot1RemEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.1 |
lldpXdot1RemEntryInformation about a particular port component. LldpXdot1RemEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.1.1 |
lldpXdot1RemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.1.1.1 |
lldpXdot1RemLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.1.1.2 |
lldpXdot1RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.1.1.3 |
lldpXdot1RemPortVlanIdThe integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of lldpXdot1RemPortVlanId should
be zero.ro Integer32(0|1..4094) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.1.1.4 |
lldpXdot1RemProtoVlanTableThis table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port. SEQUENCE OF LldpXdot1RemProtoVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2 |
lldpXdot1RemProtoVlanEntryPort and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system. LldpXdot1RemProtoVlanEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1 |
lldpXdot1RemProtoVlanTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1.1 |
lldpXdot1RemProtoVlanLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1.2 |
lldpXdot1RemProtoVlanIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1.3 |
lldpXdot1RemProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
lldpXdot1RemProtoVlanId should be zero. Integer32(0|1..4094) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1.4 |
lldpXdot1RemProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1.5 |
lldpXdot1RemProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.2.1.6 |
lldpXdot1RemVlanNameTableThis table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port. SEQUENCE OF LldpXdot1RemVlanNameEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3 |
lldpXdot1RemVlanNameEntryVLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port. LldpXdot1RemVlanNameEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3.1 |
lldpXdot1RemVlanNameTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3.1.1 |
lldpXdot1RemVlanNameLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemVlanNameLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3.1.2 |
lldpXdot1RemVlanNameIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemVlanNameIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3.1.3 |
lldpXdot1RemVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3.1.4 |
lldpXdot1RemVlanNameThe string value used to identify VLAN name identified by the
VLAN Id associated with the remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.3.1.5 |
lldpXdot1RemProtocolTableThis table contains one or more rows per protocol information
about the remote system, received on the given port. SEQUENCE OF LldpXdot1RemProtocolEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4 |
lldpXdot1RemProtocolEntryProtocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port. LldpXdot1RemProtocolEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4.1 |
lldpXdot1RemProtocolTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4.1.1 |
lldpXdot1RemProtocolLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemProtocolLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4.1.2 |
lldpXdot1RemProtocolIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemProtocolIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4.1.3 |
lldpXdot1RemProtocolIdIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4.1.4 |
lldpXdot1RemProtocolIdThe octet string value used to identify the protocols
associated with the given port of remote system.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.13.3.4.1.5 |
lldpXdot3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.14 |
lldpXdot3Config OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.14.1 |
lldpXdot3PortConfigTableA table that controls selection of LLDP TLVs to be transmitted
on individual ports. SEQUENCE OF LldpXdot3PortConfigEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.1.1 |
lldpXdot3PortConfigEntryLLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
Each active lldpXdot3PortConfigEntry must be from non-volatile
storage (along with the corresponding sysLLDPPortConfigEntry)
after a re-initialization of the management system. LldpXdot3PortConfigEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.1.1.1 |
lldpXdot3PortConfigPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.1.1.1.1 |
lldpXdot3PortConfigTLVsTxEnableThe lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.171.10.139.3.1.4.7.14.1.1.1.2 |
lldpXdot3LocalData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2 |
lldpXdot3LocPortTableThis table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1 |
lldpXdot3LocPortEntryInformation about a particular port component. LldpXdot3LocPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1.1 |
lldpXdot3LocPortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1.1.1 |
lldpXdot3LocPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1.1.2 |
lldpXdot3LocPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1.1.3 |
lldpXdot3LocPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1.1.4 |
lldpXdot3LocPortOperMauTypeAn integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.1.1.5 |
lldpXdot3LocPowerTableThis table contains one row per port of power ethernet
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocPowerEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2 |
lldpXdot3LocPowerEntryInformation about a particular port component. LldpXdot3LocPowerEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1 |
lldpXdot3LocPowerPortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.1 |
lldpXdot3LocPowerPortClassThe value that identifies the port Class of the given port
associated with the local system.ro LldpPowerPortClass .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.2 |
lldpXdot3LocPowerMDISupportedThe truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.3 |
lldpXdot3LocPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.4 |
lldpXdot3LocPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.5 |
lldpXdot3LocPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system.ro Integer32(1|2) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.6 |
lldpXdot3LocPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system.ro Integer32(1|2|3|4|5) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.2.1.7 |
lldpXdot3LocLinkAggTableThis table contains one row per port of link aggregation
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocLinkAggEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.3 |
lldpXdot3LocLinkAggEntryLink Aggregation information about a particular port
component. LldpXdot3LocLinkAggEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.3.1 |
lldpXdot3LocLinkAggPortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.3.1.1 |
lldpXdot3LocLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro LldpLinkAggStatusMap .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.3.1.2 |
lldpXdot3LocLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero.ro Integer32(0|1..2147483647) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.3.1.3 |
lldpXdot3LocMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.4 |
lldpXdot3LocMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpXdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.4.1 |
lldpXdot3LocMaxFrameSizePortNumThe value of this object is used as a port index to the
lldpXdot3LocMaxFrameSizeTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.4.1.1 |
lldpXdot3LocMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the given port of the local system.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.2.4.1.2 |
lldpXdot3RemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3 |
lldpXdot3RemPortTableThis table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpXdot3RemPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1 |
lldpXdot3RemPortEntryInformation about a particular physical network connection. LldpXdot3RemPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1 |
lldpXdot3RemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.1 |
lldpXdot3RemLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.2 |
lldpXdot3RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.3 |
lldpXdot3RemPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.4 |
lldpXdot3RemPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.5 |
lldpXdot3RemPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.6 |
lldpXdot3RemPortOperMauTypeAn integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.1.1.7 |
lldpXdot3RemPowerTableThis table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpXdot3RemPowerEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2 |
lldpXdot3RemPowerEntryInformation about a particular physical network connection. LldpXdot3RemPowerEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1 |
lldpXdot3RemPowerTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.1 |
lldpXdot3RemPowerLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.2 |
lldpXdot3RemPowerIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.3 |
lldpXdot3RemPowerPortClassThe value that identifies the port Class of the given port
associated with the remote system.ro LldpPowerPortClass .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.4 |
lldpXdot3RemPowerMDISupportedThe truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.5 |
lldpXdot3RemPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.6 |
lldpXdot3RemPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.7 |
lldpXdot3RemPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.ro Integer32(1|2) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.8 |
lldpXdot3RemPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.ro Integer32(1|2|3|4|5) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.2.1.9 |
lldpXdot3RemLinkAggTableThis table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system. SEQUENCE OF LldpXdot3RemLinkAggEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3 |
lldpXdot3RemLinkAggEntryLink Aggregation information about remote system's port
component. LldpXdot3RemLinkAggEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3.1 |
lldpXdot3RemLinkAggTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3.1.1 |
lldpXdot3RemLinkAggLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3.1.2 |
lldpXdot3RemLinkAggIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3.1.3 |
lldpXdot3RemLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro LldpLinkAggStatusMap .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3.1.4 |
lldpXdot3RemLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero.ro Integer32(0|1..2147483647) .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.3.1.5 |
lldpXdot3RemMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system. SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.4 |
lldpXdot3RemMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpXdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.4.1 |
lldpXdot3RemMaxFrameSizeTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.4.1.1 |
lldpXdot3RemMaxFrameSizeLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.4.1.2 |
lldpXdot3RemMaxFrameSizeIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.4.1.3 |
lldpXdot3RemMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.14.3.4.1.4 |
lldpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.15 |
lldpStatsRemTablesLastChangeTimeThe value of sysUpTime object (defined in IETF RFC 3418)
at the time an entry is created, modified, or deleted in the
in tables associated with the lldpRemoteSystemsData objects
and all LLDP extension objects associated with remote systems.
An NMS can use this object to reduce polling of the
lldpRemoteSystemsData objects.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.15.1 |
lldpStatsRemTablesInsertsThe number of times the complete set of information
advertised by a particular MSAP has been inserted into tables
contained in lldpRemoteSystemsData and lldpExtensions objects.
The complete set of information received from a particular
MSAP should be inserted into related tables. If partial
information cannot be inserted for a reason such as lack
of resources, all of the complete set of information should
be removed.
This counter should be incremented only once after the
complete set of information is successfully recorded
in all related tables. Any failures during inserting
information set which result in deletion of previously
inserted information should not trigger any changes in
lldpStatsRemTablesInserts since the insert is not completed
yet or or in lldpStatsRemTablesDeletes, since the deletion
would only be a partial deletion. If the failure was the
result of lack of resources, the lldpStatsRemTablesDrops
counter should be incremented once.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.171.10.139.3.1.4.7.15.2 |
lldpStatsRemTablesDeletesThe number of times the complete set of information
advertised by a particular MSAP has been deleted from
tables contained in lldpRemoteSystemsData and lldpExtensions
objects.
This counter should be incremented only once when the
complete set of information is completely deleted from all
related tables. Partial deletions, such as deletion of
rows associated with a particular MSAP from some tables,
but not from all tables are not allowed, thus should not
change the value of this counter.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.171.10.139.3.1.4.7.15.3 |
lldpStatsRemTablesDropsThe number of times the complete set of information
advertised by a particular MSAP could not be entered into
tables contained in lldpRemoteSystemsData and lldpExtensions
objects because of insufficient resources.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.171.10.139.3.1.4.7.15.4 |
lldpStatsRemTablesAgeoutsThe number of times the complete set of information
advertised by a particular MSAP has been deleted from tables
contained in lldpRemoteSystemsData and lldpExtensions objects
because the information timeliness interval has expired.
This counter should be incremented only once when the complete
set of information is completely invalidated (aged out)
from all related tables. Partial aging, similar to deletion
case, is not allowed, and thus, should not change the value
of this counter.ro ZeroBasedCounter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.5 |
lldpStatsTxPortTableA table containing LLDP transmission statistics for
individual ports. Entries are not required to exist in
this table while the lldpPortConfigEntry object is equal to
'disabled(4)'. SEQUENCE OF LldpStatsTxPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.15.6 |
lldpStatsTxPortEntryLLDP frame transmission statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port. LldpStatsTxPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.15.6.1 |
lldpStatsTxPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.15.6.1.1 |
lldpStatsTxPortFramesTotalThe number of LLDP frames transmitted by this LLDP agent
on the indicated port.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.6.1.2 |
lldpRxStatsPortTableA table containing LLDP reception statistics for individual
ports. Entries are not required to exist in this table while
the lldpPortConfigEntry object is equal to 'disabled(4)'. SEQUENCE OF LldpRxStatsPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7 |
lldpRxStatsPortEntryLLDP frame reception statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port. LldpRxStatsPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1 |
lldpStatsRxPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.1 |
lldpStatsRxPortFramesDiscardedTotalThe number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formating problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exist with the local LLDP agent in the receiving system.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.2 |
lldpStatsRxPortFramesErrorsThe number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.3 |
lldpStatsRxPortFramesTotalThe number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.4 |
lldpStatsRxPortTLVsDiscardedTotalThe number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.5 |
lldpStatsRxPortTLVsUnrecognizedTotalThe number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value
is in the range of reserved TLV types (000 1001 - 111 1110)
in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized
TLV may be a basic management TLV from a later LLDP version.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.6 |
lldpStatsRxPortAgeoutsTotalThe counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained in
lldpRemoteSystemsData and lldpExtensions objects because
the information timeliness interval has expired.
This counter is similar to lldpStatsRemTablesAgeouts, except
that the counter is on a per port basis. This enables NMS to
poll tables associated with the lldpRemoteSystemsData objects
and all LLDP extension objects associated with remote systems
on the indicated port only.
This counter should be set to zero during agent initialization
and its value should not be saved in non-volatile storage.
When a port's admin status changes from 'disabled' to
'rxOnly', 'txOnly' or 'txAndRx', the counter associated with
the same port should reset to 0. The agent should also flush
all remote system information associated with the same port.
This counter should be incremented only once when the
complete set of information is invalidated (aged out) from
all related tables on a particular port. Partial aging
is not allowed, and thus, should not change the value of
this counter.ro ZeroBasedCounter32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.7.1.7 |
lldpStatsRemTablesClearclear the statisc of remote tables ,1 indicate trigger clearrw Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.15.8 |
lldpLocalSystemData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.16 |
lldpLocChassisIdSubtypeThe type of encoding used to identify the chassis
associated with the local system.ro LldpChassisIdSubtype .1.3.6.1.4.1.171.10.139.3.1.4.7.16.1 |
lldpLocChassisIdThe string value used to identify the chassis component
associated with the local system.ro LldpChassisId .1.3.6.1.4.1.171.10.139.3.1.4.7.16.2 |
lldpLocSysNameThe string value used to identify the system name of the
local system. If the local agent supports IETF RFC 3418,
lldpLocSysName object should have the same value of sysName
object.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.16.3 |
lldpLocSysDescThe string value used to identify the system description
of the local system. If the local agent supports IETF RFC 3418,
lldpLocSysDesc object should have the same value of sysDesc
object.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.16.4 |
lldpLocSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the local system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.139.3.1.4.7.16.5 |
lldpLocSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the local system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.139.3.1.4.7.16.6 |
lldpLocPortTableThis table contains one or more rows per port information
associated with the local system known to this agent. SEQUENCE OF LldpLocPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.16.7 |
lldpLocPortEntryInformation about a particular port component.
Entries may be created and deleted in this table by the
agent. LldpLocPortEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.16.7.1 |
lldpLocPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.16.7.1.1 |
lldpLocPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpLocPortId' object.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.16.7.1.2 |
lldpLocPortIdThe string value used to identify the port component
associated with a given port in the local system.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.16.7.1.3 |
lldpLocPortDescThe string value used to identify the 802 LAN station's port
description associated with the local system. If the local
agent supports IETF RFC 2863, lldpLocPortDesc object should
have the same value of ifDescr object.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.16.7.1.4 |
lldpLocManAddrTableThis table contains management address information on the
local system known to this agent. SEQUENCE OF LldpLocManAddrEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8 |
lldpLocManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the system identified by a particular
lldpLocChassisId. Each management address should have
distinct 'management address type' (lldpLocManAddrSubtype) and
'management address' (lldpLocManAddr.)
Entries may be created and deleted in this table by the
agent. LldpLocManAddrEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1 |
lldpLocManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1.1 |
lldpLocManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1.2 |
lldpLocManAddrLenThe total length of the management address subtype and the
management address fields in LLDPDUs transmitted by the
local LLDP agent.
The management address length field is needed so that the
receiving systems that do not implement SNMP will not be
required to implement an iana family numbers/address length
equivalency table in order to decode the management adress.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1.3 |
lldpLocManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the local system.ro LldpManAddrIfSubtype .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1.4 |
lldpLocManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the local system.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1.5 |
lldpLocManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.16.8.1.6 |
lldpRemoteSystemsData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.17 |
lldpRemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one lldpRemEntry is present for each local port,
or it may choose to maintain multiple lldpRemEntries for
the same local port.
The following procedure may be used to retrieve remote
systems information updates from an LLDP agent:
1. NMS polls all tables associated with remote systems
and keeps a local copy of the information retrieved.
NMS polls periodically the values of the following
objects:
a. lldpStatsRemTablesInserts
b. lldpStatsRemTablesDeletes
c. lldpStatsRemTablesDrops
d. lldpStatsRemTablesAgeouts
e. lldpStatsRxPortAgeoutsTotal for all ports.
2. LLDP agent updates remote systems MIB objects, and
sends out notifications to a list of notification
destinations.
3. NMS receives the notifications and compares the new
values of objects listed in step 1.
Periodically, NMS should poll the object
lldpStatsRemTablesLastChangeTime to find out if anything
has changed since the last poll. if something has
changed, NMS will poll the objects listed in step 1 to
figure out what kind of changes occurred in the tables.
if value of lldpStatsRemTablesInserts has changed,
then NMS will walk all tables by employing TimeFilter
with the last-polled time value. This request will
return new objects or objects whose values are updated
since the last poll.
if value of lldpStatsRemTablesAgeouts has changed,
then NMS will walk the lldpStatsRxPortAgeoutsTotal and
compare the new values with previously recorded ones.
For ports whose lldpStatsRxPortAgeoutsTotal value is
greater than the recorded value, NMS will have to
retrieve objects associated with those ports from
table(s) without employing a TimeFilter (which is
performed by specifying 0 for the TimeFilter.)
lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
objects are provided for informational purposes. SEQUENCE OF LldpRemEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1 |
lldpRemEntryInformation about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active. LldpRemEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1 |
lldpRemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.1 |
lldpRemLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.2 |
lldpRemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.3 |
lldpRemChassisIdSubtypeThe type of encoding used to identify the chassis associated
with the remote system.ro LldpChassisIdSubtype .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.4 |
lldpRemChassisIdThe string value used to identify the chassis component
associated with the remote system.ro LldpChassisId .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.5 |
lldpRemPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpRemPortId' object.ro LldpPortIdSubtype .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.6 |
lldpRemPortIdThe string value used to identify the port component
associated with the remote system.ro LldpPortId .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.7 |
lldpRemPortDescThe string value used to identify the description of
the given port associated with the remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.8 |
lldpRemSysNameThe string value used to identify the system name of the
remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.9 |
lldpRemSysDescThe string value used to identify the system description
of the remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.10 |
lldpRemSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the remote system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.11 |
lldpRemSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the remote system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.139.3.1.4.7.17.1.1.12 |
lldpRemManAddrTableThis table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent. SEQUENCE OF LldpRemManAddrEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2 |
lldpRemManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
lldpRemIndex whose information is received on
lldpRemManLocalPortNum of the local system. Each management
address should have distinct 'management address
type' (lldpRemManAddrSubtype) and 'management address'
(lldpRemManAddr.)
Entries may be created and deleted in this table by the
agent. LldpRemManAddrEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1 |
lldpRemManTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.1 |
lldpRemManLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemManLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.2 |
lldpRemManIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemManIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.3 |
lldpRemManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.4 |
lldpRemManAddrThe string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.5 |
lldpRemManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.ro LldpManAddrIfSubtype .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.6 |
lldpRemManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the remote system.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.7 |
lldpRemManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.17.2.1.8 |
lldpRemUnknownTLVTableThis table contains information about an incoming TLV which
is not recognized by the receiving LLDP agent. The TLV may
be from a later version of the basic management set.
This table should only contain TLVs that are found in
a single LLDP frame. Entries in this table, associated
with an MAC service access point (MSAP, the access point
for MAC services provided to the LCC sublayer, defined
in IEEE 100, which is also identified with a particular
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
most recently received unrecognized TLV from the same MSAP,
or they will naturally age out when the rxInfoTTL timer
(associated with the MSAP) expires. SEQUENCE OF LldpRemUnknownTLVEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3 |
lldpRemUnknownTLVEntryInformation about an unrecognized TLV received from a
physical network connection. Entries may be created and
deleted in this table by the agent, if a physical topology
discovery process is active. LldpRemUnknownTLVEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3.1 |
lldpRemUnknownTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3.1.1 |
lldpRemUnknownLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemUnknownLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3.1.2 |
lldpRemUnknownIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemUnknownIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3.1.3 |
lldpRemUnknownTLVTypeThis object represents the value extracted from the type
field of the TLV.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3.1.4 |
lldpRemUnknownTLVInfoThis object represents the value extracted from the value
field of the TLV.ro OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.4.7.17.3.1.5 |
lldpXMedNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.18 |
lldpXMedTopologyChangeDetectedA notification generated by the local device sensing
a change in the topology that indicates that a new remote
device attached to a local port, or a remote device disconnected
or moved from one port to another. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.4.7.18.1 |
lldpXMedObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.19 |
lldpXMedConfig OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1 |
lldpXMedLocDeviceClassLocal Device Class.ro LldpXMedDeviceClass .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.1 |
lldpXMedPortConfigTableA table that controls selection of LLDP TLVs to be transmitted
on individual ports. SEQUENCE OF LldpXMedPortConfigEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.2 |
lldpXMedPortConfigEntryLLDP configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpXMedPortConfigEntry must be stored and
retrieved from non-volatile storage (along with the
corresponding lldpPortConfigEntry) after a re-initialization
of the management system. LldpXMedPortConfigEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.2.1 |
lldpXMedPortConfigPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.2.1.1 |
lldpXMedPortCapSupportedThe bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port
on the LLDP agent of the device. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent supports the
corresponding TLV.ro LldpXMedCapabilities .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.2.1.2 |
lldpXMedPortConfigTLVsTxEnableThe lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
includes the MED organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent will send the
corresponding TLV if the respective capability is supported per
port.
Setting a bit with in this object for a non-supported capability
shall have no functional effect and will result in an inconsistent
value error returned to the management application.
There are other rules and restrictions that prevent arbitrary
combinations of TLVs to be enabled on LLDP-MED devices according to
the device classes. These rules are defined in Section 10.2.1,
Tables 5 - 9 of ANSI/TIA-1057. In case a management application
attempts to set this object to a value that does not follow the rules,
the set operation shall have and will result in an inconsistent
value error returned to the management application.
Setting this object to an empty set is valid and effectively
disables LLDP-MED on a per-port basis by disabling transmission of
all MED organizational TLVs. In this case the remote tables objects
in the LLDP-MED MIB corresponding to the respective port will not
be populated.
The default value for lldpXMedPortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw LldpXMedCapabilities .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.2.1.3 |
lldpXMedPortConfigNotifEnableA value of 'true(1)' enables sending the topology change
traps on this port.
A value of 'false(2)' disables sending the topology change
traps on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.2.1.4 |
lldpXMedFastStartRepeatCountThe number of times the fast start LLDPDU are being sent during the
activation of the fast start mechanism defined by LLDP-MED.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.4.7.19.1.3 |
lldpXMedLocalData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2 |
lldpXMedLocMediaPolicyTableThis table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent. SEQUENCE OF LldpXMedLocMediaPolicyEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1 |
lldpXMedLocMediaPolicyEntryInformation about a particular policy on a specific
port component. LldpXMedLocMediaPolicyEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1 |
lldpXMedLocMediaPolicyPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.1 |
lldpXMedLocMediaPolicyAppTypeThe media type that defines the primary function of the
application for the policy advertised by an endpoint. PolicyAppType .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.2 |
lldpXMedLocMediaPolicyVlanIDAn extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use.ro Integer32 (0|1..4094|4095) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.3 |
lldpXMedLocMediaPolicyPriorityThis object contains the value of the 802.1p priority
which is associated with the given port on the
local system.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.4 |
lldpXMedLocMediaPolicyDscpThis object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system.ro Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.5 |
lldpXMedLocMediaPolicyUnknownA value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' indicates that this network policy
is definedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.6 |
lldpXMedLocMediaPolicyTaggedA value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevancero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.1.1.7 |
lldpXMedLocHardwareRevThe vendor-specific hardware revision string
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.2 |
lldpXMedLocFirmwareRevThe vendor-specific firmware revision string
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.3 |
lldpXMedLocSoftwareRevThe vendor-specific software revision string
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.4 |
lldpXMedLocSerialNumThe vendor-specific serial number
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.5 |
lldpXMedLocMfgNameThe vendor-specific manufacturer name
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.6 |
lldpXMedLocModelNameThe vendor-specific model name
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.7 |
lldpXMedLocAssetIDThe vendor-specific asset tracking identifier
as advertised by the endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.8 |
lldpXMedLocXPoEDeviceTypeDefines the type of Power-via-MDI (Power over Ethernet) advertised
by the local device.
A value pseDevice(2) indicates that the device is advertised as a
Power Sourcing Entity (PSE).
A value pdDevice(3) indicates that the device is advertised as a
Powered Device (PD).
A value of none(4) indicates that the device does not support PoE.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.4.7.19.2.10 |
lldpXMedRemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3 |
lldpXMedRemCapabilitiesTableA table that displays LLDP-MED capabilities of remote devices
connected to individual ports. SEQUENCE OF LldpXMedRemCapabilitiesEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.1 |
lldpXMedRemCapabilitiesEntryLLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.
The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populate. An entry in one of these table is meaningful
and shall be populated by the agent only if the corresponding bits
for the respective function are set in the objects in this table. LldpXMedRemCapabilitiesEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.1.1 |
lldpXMedRemCapTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.1.1.1 |
lldpXMedRemCapPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.1.1.2 |
lldpXMedRemCapIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.1.1.3 |
lldpXMedRemCapSupportedThe bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent has the capability
to support the corresponding TLV.ro LldpXMedCapabilities .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.1.1.4 |
lldpXMedRemMediaPolicyTableThis table contains media policy information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set. SEQUENCE OF LldpXMedRemMediaPolicyEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2 |
lldpXMedRemMediaPolicyEntryInformation about the per port per policy type policy
information for a particular physical network connection. LldpXMedRemMediaPolicyEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1 |
lldpXMedRemMediaPolicyTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.1 |
lldpXMedRemMediaPolicyPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.2 |
lldpXMedRemMediaPolicyIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.3 |
lldpXMedRemMediaPolicyAppTypeThe media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port. PolicyAppType .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.4 |
lldpXMedRemMediaPolicyVlanIDAn extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use.ro Integer32 (0|1..4094|4095) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.5 |
lldpXMedRemMediaPolicyPriorityThis object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.6 |
lldpXMedRemMediaPolicyDscpThis object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the port.ro Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.7 |
lldpXMedRemMediaPolicyUnknownA value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' indicates that this network policy
is defined.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.8 |
lldpXMedRemMediaPolicyTaggedA value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevancero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.2.1.9 |
lldpXMedRemInventoryTableThis table contains inventory information as advertised
by the remote system.
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set SEQUENCE OF LldpXMedRemInventoryEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3 |
lldpXMedRemInventoryEntryInformation about inventory information for the remote devices
connected to the ports. LldpXMedRemInventoryEntry .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1 |
lldpXMedRemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.1 |
lldpXMedRemPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.2 |
lldpXMedRemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.3 |
lldpXMedRemHardwareRevThe vendor-specific hardware revision string
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.4 |
lldpXMedRemFirmwareRevThe vendor-specific firmware revision string
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.5 |
lldpXMedRemSoftwareRevThe vendor-specific software revision string
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.6 |
lldpXMedRemSerialNumThe vendor-specific serial number
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.7 |
lldpXMedRemMfgNameThe vendor-specific manufacturer name
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.8 |
lldpXMedRemModelNameThe vendor-specific model name
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.9 |
lldpXMedRemAssetIDThe vendor-specific asset tracking identifier
as advertised by the remote endpoint.ro SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.4.7.19.3.3.1.10 |
dlinkL3Features OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.5 |
l3ARPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.5.1 |
arpAgingTime OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.5.1.1 |
arpAgingTimeTableThe table of ARP Aging Time. SEQUENCE OF ArpAgingTimeEntry .1.3.6.1.4.1.171.10.139.3.1.5.1.1.1 |
arpAgingTimeEntryThe list of snmp view tree entry. ArpAgingTimeEntry .1.3.6.1.4.1.171.10.139.3.1.5.1.1.1.1 |
arpAgingTimeIntrefaceIDA unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.1.1.1.1.1 |
arpAgingTimeTimeoutARP Aging Time Timeout (min).rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.1.1.1.1.2 |
arpARPTable OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.5.1.2 |
arpTableA table to control ARP Spoofing prevention for the entire
switch or for each interface in the switch. SEQUENCE OF ARPEntry .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1 |
arpEntryAn entry appears in this table for each interface
in the system. ARPEntry .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1.1 |
arpIntrefaceIDProxy ARP VLAN Interface.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1.1.1 |
arpIpAddrSpecifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'.ro IpAddress .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1.1.2 |
arpMacAddressEthernet Mac Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1.1.3 |
arpTypeARP Table Type.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1.1.4 |
arpRowStatusARP Table RowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.1.2.1.1.5 |
l3IpMgmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.5.3 |
multiIfMainTableA list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex. SEQUENCE OF MultiIfMainEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.1 |
multiIfMainEntryAn entry containing management information applicable
to a particular interface. MultiIfMainEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1 |
multiIfMainIndexA unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1.1 |
multiIfMainAdminStatusThe desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
When a managed system initializes, all
interfaces start with ifMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, ifMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state).rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1.2 |
multiIfMainOperStatusThe current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If ifMainAdminStatus is down (2)
then ifMainOperStatus would be down (2). If
ifMainAdminStatus is changed to up (1) then
ifMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1.3 |
multiIfIpBindVlanIdthe IP Interface over the Vlan Interface which it vlan id is the configure Vlan id.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1.4 |
multiL3VlanIfNamethe L3 Vlan Interface Name.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1.5 |
multiIfMainRowStatusA RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.3.1.1.6 |
multiIfIpTableA list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed. SEQUENCE OF MultiIfIpEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.2 |
multiIfIpEntryAn entry containing management information applicable
to a particular interface over which IP is operating. MultiIfIpEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.2.1 |
multiIfIpIndexA unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.2.1.1 |
multiIfIpAddrAllocMethodThe mechanism to be used for allocation of IP
address for this interface.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface.
The dynamic(2) option takes an IP
address dynamically from the available
server (dhcp/bootp/rarp) .rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.2.1.2 |
multiIfIpAddrSpecifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.5.3.2.1.3 |
multiIfIpSubnetMaskSpecifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.5.3.2.1.4 |
multiRouteTableThis entity's IP Routing table. This table can be used to
view all the routes present in the system SEQUENCE OF MultiRouteEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.3 |
multiRouteEntryA particular route to a particular destina-
tion, under a particular policy. MultiRouteEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1 |
multiRouteDestThe destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
RouteMask object is not equal to x. IpAddress .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1.1 |
multiRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the RouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the RouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
RouteDest object is not equal to fsRoute-
Dest. IpAddress .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1.2 |
multiRouteTosThe policy specifier is the IP TOS Field. The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.
+-+-+-+-+-+-+-+-+
| | | |
| PRECEDENCE | TYPE OF SERVICE | 0 |
| | | |
+-+-+-+-+-+-+-+-+
IP TOS IP TOS
Field Policy Field Policy
Contents Code Contents Code
0 0 0 0 ==> 0 0 0 0 1 ==> 2
0 0 1 0 ==> 4 0 0 1 1 ==> 6
0 1 0 0 ==> 8 0 1 0 1 ==> 10
0 1 1 0 ==> 12 0 1 1 1 ==> 14
1 0 0 0 ==> 16 1 0 0 1 ==> 18
1 0 1 0 ==> 20 1 0 1 1 ==> 22
1 1 0 0 ==> 24 1 1 0 1 ==> 26
1 1 1 0 ==> 28 1 1 1 1 ==> 30 Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1.3 |
multiRouteNextHopOn remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0. IpAddress .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1.4 |
multiRouteIfIndexThe ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
0 indicate invalid interfacero Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1.5 |
multiRouteStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.3.3.1.6 |
multiIpv6IfTableThe IPv6 Interface table contains information on the
entity's internetwork-layer interfaces on which IPv6.
protocol is enabled. An IPv6 interface constitutes a logical
network layer attachment to the layer immediately below
IPv6. These include LAN interfaces, Point-to-Point interfaces,
NBMA interfaces and IPv6 over IPv4 Tunnel interfaces. SEQUENCE OF MultiIpv6IfEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.4 |
multiIpv6IfEntryAn interface entry containing objects about a particular
IPv6 interface. The entry is created or deleted from SNMP. MultiIpv6IfEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.4.1 |
multiIpv6IfIndexA unique value identifying the particular IPv6
interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.4.1.1 |
multiIpv6IfAdminStatusIndicates whether IPv6 is enabled/disabled on this interface.
When lower layer indicates the creation of the interface, an
entry will be create in IPv6 interfac table with
fsipv6IfAdminStatus in down(2) state. Either on setting this
object as up(1) or configuring any IPv6 address over this
interface, will set the fsipv6IfAdminStatus to up(1) state.
If this object is set to down(2), and if no IPv6 address is
configured for this interface, fsipv6IfAdminStatus goes
down(2). Else the Status remains up(1), as long as the
IPv6 address are present. Once these addresses are removed,
the status goes to down(2).rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.4.1.2 |
multiIpv6IfOperStatusThe operational state of interface. It is up(1) if the
fsipv6IfAdminStatus is 'up' and the layer below the network
layer is also operational. Otherwise it is down(2).ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.4.1.3 |
multiIpv6IfRetransmitTimeThe retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted Neighbor Solicitations and is used during
address resolution, unreachability detection and
duplicate address detection.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.3.4.1.4 |
multiIpv6AddrTableThe table containing entity's IPv6 addressing information. SEQUENCE OF MultiIpv6AddrEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.5 |
multiIpv6AddrEntryThe entry in the IPv6 Address Table which defines a
unicast, anycast or link-local address on an IPv6 interface. MultiIpv6AddrEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1 |
multiIpv6AddrIndexThe index value which uniquely identifies the IPv6
interface on which this IPv6 address entry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of fsipv6IfIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.1 |
multiIpv6AddrAddressThe IPv6 address to which this entry's addressing
information pertains.ro Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.2 |
multiIpv6AddrPrefixLenThe length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 bits.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.3 |
multiIpv6AddrAdminStatusIndicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv6 to be disabled on the interface. NotInService value is
not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.4 |
multiIpv6AddrTypeIndicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local address has the prefix '0xfe80'. This
object can be modified only if fsipv6AddrOperStatus is
down.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.5 |
multiIpv6AddrCfgMethodIndicates the configuration method of the address.
static(1) indicates that this address is configured by user;
stateless(2) indicates that this address is auto configured stateless;
stateful(3) indicates that this address is auto configured when DHCPv6 server replyro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.6 |
multiIpv6AddrOperStatusIndicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicate Address Detection is not performed, this
object will take values only complete(2) and down(3).ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.5.1.7 |
multiIPv6neighborTableA list of the Neighbor Cache Table. SEQUENCE OF MultiIPV6NeighborEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.6 |
multiIpv6NeighborEntryA Neighbor cache entry containing the ifindex and ipv6 addr. MultiIPV6NeighborEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1 |
multiIpv6NeighborIndexThe interface index of the Neighbor entry.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1.1 |
multiIpv6NeighborAddrAllows the entry of an IP address that will be a Neighbor entry into
the Neighbor Cache Table.ro Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1.2 |
multiIpv6NeighborMacAddrThe MAC address associated of the Neighbor entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1.3 |
multiIpv6NeighborTypeThe type associated of the Neighbor entry.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1.4 |
multiIpv6NeighborCacheStateThe type associated of the Neighbor entry.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1.5 |
multiIpv6NeighborRowStatusThe status of an entry in the Neighbor Cache Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.3.6.1.6 |
multiIpv6RouteTableThis table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes. SEQUENCE OF MultiIpv6RouteEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.7 |
multiIpv6RouteEntryAn entry in the IPv6 Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured. There
can be a static route as well as dynamic routes with the
same destination and prefix length. MultiIpv6RouteEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1 |
multiIpv6RouteDestThe destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value.ro Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1.1 |
multiIpv6RoutePfxLengthIndicates the prefix length of the destination
address.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1.2 |
multiIpv6RouteProtocolThe routing mechanism via which this route was
learned.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1.3 |
multiIpv6RouteNextHopNext hop IPv6 Address for this route. For direct routes
it has the value ::0.ro Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1.4 |
multiIpv6RouteIfIndexThe index value which uniquely identifies the interface
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
ipv6IfIndex.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1.5 |
multiIpv6RouteAdminStatusAdministrative Status of the route. This object is used
to create or delete the route entry. The ipv6RouteIfIndex
needs to be set, before the route entry is made active.
CreateAndGo is not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.5.3.7.1.6 |
dhcpClientTableThe dhcp options which are to be added to packets sent
will be added as entries in this table.
While sending out discover message, the options entries
which are avilable in this table will be added with
discover message. SEQUENCE OF DhcpClientEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.8 |
dhcpClientEntryAn entry containing dhcp options which will be added to the
packets from client to server. DhcpClientEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1 |
dhcpClientIfIndexA unique identifier for each interface.
This object is identical to the ifIndex
of the standard MIB-2 ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.1 |
dhcpClientClientIdIfIdxThis object indicates ifIndex of the VLAN interface whose
hexadecimal MAC address will be used as the client ID to be
sent with the DISCOVER message
0 indicates that preferred client id is unspecifiedrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.2 |
dhcpClientClassIdTypeThe object indicates the type of class id which is defined by
dhcpClientClassIdValue.
The value means :
ascii(1)- The dhcpClientClassIdValue is ascii string.
hex(2) - The dhcpClientClassIdValue is a string of HEX
number.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.3 |
dhcpClientClassIdThis object indicates the value of vendor class identifier
(option 60) to be sent with the DHCP DISCOVER message.
An dhcpClientClassIdValue value is always interpreted
within the context of an dhcpClientClassIdType value.
If dhcpClientClassIdType is 'hex', this object is a HEX
string value, which is restricted to hexadecimal character set.
length is equal to 0 indicates that preferred class id is unspecifiedrw OCTET STRING .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.4 |
dhcpClientHostNameThis object indicates the host name. The host name must start with
a letter, end with a letter or digit, and only with interior
characters letters, digits, and hyphens.
length is equal to 0 indicates that preferred host name is unspecifiedrw DisplayString .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.5 |
dhcpClientLeaseDayThis object indicates the number of days for the duration of
preferred lease time. Value of -1 indicates that preferred lease
time is unspecified.
This value is checked when an IP address is acquired from
a DHCP server.rw Integer32 (-1 | 0..10000) .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.6 |
dhcpClientLeaseHourThis object indicates the number of hours for the duration of preferred
lease time.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.7 |
dhcpClientLeaseMinuteThis object indicates the number of minutes for the duration of preferred
lease time.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.5.3.8.1.8 |
dhcp6ClientTableA table contains all DHCPv6 client entries which consists of
DHCPv6 client related configuration. An entry is created to set a
value different from the default on an interface. SEQUENCE OF Dhcp6ClientEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.9 |
dhcp6ClientEntryDefines an entry in the dhcp6ClientTable. Dhcp6ClientEntry .1.3.6.1.4.1.171.10.139.3.1.5.3.9.1 |
dhcp6ClientIndexThe ifIndex value of the interface.
Only VLAN interfaces are valid interfaces. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.5.3.9.1.1 |
dhcp6ClientEnabledThis object indicates whether acquires an IPv6 address on an
interface from the DHCPv6 server.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.9.1.2 |
dhcp6ClientRapidCommitThis object indicates whether the two-message
exchange for address allocation and other configuration is used.
When dhcp6ClientEnabled is 'false', dhcp6ClientRapidCommit
cannot be set to 'true'.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.5.3.9.1.3 |
dlinkQoS OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6 |
qosBasicSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1 |
qosBasPortDefaultCoS OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.1 |
qosPortDefaultCoSTableThis table of Port Default CoS. SEQUENCE OF QosPortDefaultCoSEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.1.1 |
qosPortDefaultCoSEntryAn entry configures the Port Default CoS. QosPortDefaultCoSEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.1.1.1 |
qosPortindexInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.1.1.1.1 |
qosPortDefModeThis object indicates the mechanism of QoS scheduling on the interface.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.1.1.1.2 |
qosPortDefCosPort Default CoS. Indicates the Default CoS.rw Integer32 ( 0..7 ) .1.3.6.1.4.1.171.10.139.3.1.6.1.1.1.1.3 |
qosPortDefOverridePort Default CoS. Overriderw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.1.1.1.4 |
qosBasPortScheMethod OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.2 |
qosPortSchedulerMethodTableThis table consists of a list of scheduling mechanism configurations
for ports. SEQUENCE OF QosPortSchedulerMethodEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.2.1 |
qosPortSchedulerMethodEntryAn entry configures the scheduling mode on an interface. QosPortSchedulerMethodEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.2.1.1 |
qosSchedulingModeBasePortInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.2.1.1.1 |
qosSchedulingModeThis object indicates the mechanism of QoS scheduling on the interface.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.2.1.1.2 |
qosBasQueueSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.3 |
qosQueueSettingsTableThis table consists of a list of configurations for WRR queue bandwidth
of queues. SEQUENCE OF QosQueueSettingsEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.3.1 |
qosQueueSettingsEntryAn entry defines WRR weight of a queue on an interface.
An entry exists for each queue if the WRR bandwidth is configurable
on the queue. QosQueueSettingsEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.3.1.1 |
qosQueueBasePortInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.3.1.1.1 |
qosQueueIDThis object indicates the queue ID of the entry.ro INTEGER ( 0..7 ) .1.3.6.1.4.1.171.10.139.3.1.6.1.3.1.1.2 |
qosQueueWrrWeightThis object indicates the WRR Weight.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.6.1.3.1.1.3 |
qosQueueQuantumThis object indicates the WDRR Quantum.rw INTEGER ( 0 .. 127) .1.3.6.1.4.1.171.10.139.3.1.6.1.3.1.1.4 |
qosBasCoS2QueueMapping OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.4 |
qosCoS2QueueTableThe table of CoS to Queue Mapping. SEQUENCE OF QosCoS2QueueEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.4.1 |
qosCoS2QueueEntryThe list of CoS to Queue Mapping entry. QosCoS2QueueEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.4.1.1 |
qosCoS2QueCosCoS to Queue Mapping. CoS.ro Integer32 ( 0..7 ) .1.3.6.1.4.1.171.10.139.3.1.6.1.4.1.1.1 |
qosCos2QueQueueIDCoS to Queue Mapping. Queue ID.rw Integer32 ( 0..7 ) .1.3.6.1.4.1.171.10.139.3.1.6.1.4.1.1.2 |
qosBasPortRateLimiting OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.5 |
qosPortRateLimitingTableThis table consists of Port Rate Limiting. SEQUENCE OF QosPortRateLimitingEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1 |
qosPortRateLimitingEntryAn entry configures the Port Rate Limiting. QosPortRateLimitingEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1 |
qosBandwidthBasePortInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.1 |
qosBandwidthRxRateConfigures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. if
qosBandwidthRxRateMode is rate, range is 64 ~ 10000000 and
qosBandwidthRxRateMode is percent, range is 1 ~ 100.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.2 |
qosBandwidthRxRateModeIndicates the Minimum Rate Mode.
It will indicate the field:qosBandwidthRxRate attribute.
rate: means the Minimum Rate.
percent: means the percentage.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.3 |
qosBandwidthRxBurstConfigures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.4 |
qosBandwidthTxRateConfigures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. if
qosBandwidthTxRateMode is rate, range is 64 ~ 10000000 and
qosBandwidthTxRateMode is percent, range is 1 ~ 100.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.5 |
qosBandwidthTxRateModeIndicates the Minimum Rate Mode.
It will indicate the field:qosBandwidthTxRate attribute.
rate: means the Minimum Rate.
percent: means the percentage.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.6 |
qosBandwidthTxBurstConfigures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the burst size of the port
will be applied. This value can also be affected by the metering.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.5.1.1.7 |
qosBasQueueRateLimiting OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.6 |
qosQueueRateLimitingTableA table contains information about Queue Rate Limiting. SEQUENCE OF QosQueueRateLimitingEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1 |
qosQueueRateLimitingEntryAn entry contains bandwidth control information of Queue Rate Limiting. QosQueueRateLimitingEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1.1 |
qosQueueBandwidthBasePortInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1.1.1 |
qosQueueBandwidthQueIdIndicates the queue ID of the entry.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1.1.2 |
qosQueueBandwidthMinRateIndicates the minimum rate of the specified port and queue.
It is based on the dQosQueueBandwidthMinRateMode field and
if the dQosQueueBandwidthMinRateMode selected as:
rate: means egress Minimum Rate (units:kbps),range are 64 ~ 10000000.
percent: means the percentage and the effective rangs are 1 ~ 100.
0 means disabled rate limit.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1.1.3 |
qosQueueBandwidthMaxRateIndicates the maximum rate of the specified port and queue.
It is based on the dQosQueueBandwidthMaxRateMode field and
if the dQosQueueBandwidthMaxRateMode selected as:
rate: means egress Maximum Rate (units:kbps),range are 64 ~ 10000000.
percent: means the percentage and the effective rangs are 1 ~ 100.
0 means disabled rate limit.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1.1.4 |
qosQueueBandwidthRateModeIndicates the Minimum Rate Mode.
It will indicate the field:dQosQueueBandwidthMinRate attribute.
rate: means the Minimum Rate.
percent: means the percentage.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.6.1.1.5 |
qosBasDscpMapCos OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.6.1.7 |
qosDscpMapCosTableThis table of Port Default CoS. SEQUENCE OF QosDscpMapCosEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.7.1 |
qosDscpMapCosEntryAn entry configures the Port Default CoS. QosDscpMapCosEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.7.1.1 |
qosPortIndexInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.7.1.1.1 |
qosTrustModeThe QoS port trust mode.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.6.1.7.1.1.2 |
qosDscpValueMapCosTableThis table of Port Default CoS. SEQUENCE OF QosDscpValueMapCosEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.7.2 |
qosDscpValueMapCosEntryAn entry configures the Port Default CoS. QosDscpValueMapCosEntry .1.3.6.1.4.1.171.10.139.3.1.6.1.7.2.1 |
qosDscpPortThe DSCP port index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.7.2.1.1 |
qosDscpCosThe CoS value.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.6.1.7.2.1.2 |
qosDscpMapCosListThe DSCP value list mapping to CoS.rw PortList .1.3.6.1.4.1.171.10.139.3.1.6.1.7.2.1.3 |
dlinkACL OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7 |
aclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1 |
aclProfile OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.1 |
aclProfileTableA table to ACL profile . SEQUENCE OF AclProfileEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1 |
aclProfileEntryEach entry in this table is a ACL profile.
Index to the table is ACL profile ID. AclProfileEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1 |
aclProfileNoThe ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.1 |
aclProfileNameAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.2 |
aclProfileTypeThe ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3v4 (2) - for IPv4-based rule,
l3v4Ext (3) - for IPv4-Ext rule,
l3v6 (4) - for IPv6-based rule.
Note that only l2, l3 and l3v6 could be set by user,
other is reserved for system to show information.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.3 |
aclProfileRuleCountThe number of rules in this profile.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.4 |
aclProfileRemarkacl group description which is long and more detailed.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.5 |
aclProfileRuleIdStartthe start rule id in this acl group.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.6 |
aclProfileRuleIdStepthe step of the rule id in this acl group.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.7 |
aclProfileRuleCounterStatethe state of hw counter for this acl group.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.8 |
aclProfileRuleCounterClearClear rule hw counter for this acl group.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.9 |
aclProfileStatusThis object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of aclProfileType,
aclProfileMask and ProtocolType are not conflicted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.1.1.1.10 |
aclL2Rule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.2 |
aclL2RuleTableA table to configure L2 filter rules in the system. SEQUENCE OF AclL2RuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1 |
aclL2RuleEntryEach entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID. AclL2RuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1 |
aclL2ProfileIDACL Profile ID which this rule join.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.1 |
aclL2AccessIDL2 Filter rule ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.2 |
aclL2RuleEtherTypeThe value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0', which means the rule don't care this
condition.
The aclL2EtherFrameType should be specified as ether-type.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.3 |
aclL2RuleDstMacAddrDestination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.4 |
aclL2RuleSrcMacAddrSource MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.5 |
aclL2RuleVlanIdVlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.rw Integer32 (-1..4094) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.6 |
aclL2Rule1pPriority802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition.rw Integer32 (-1..7) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.7 |
aclL2RuleDstMacAddrMaskThe MAC address Mask work for Destination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.8 |
aclL2RuleSrcMacAddrMaskThe MAC address Mask work for Source MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.9 |
aclL2RuleTimeRangeAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.10 |
aclL2RuleActionSpecifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.11 |
aclL2RuleEtherTypeMaskThe value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition.
The aclL2EtherFrameType should be specified as ether-type.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.12 |
aclL2RuleMatchCountNumber of times this filter is matched.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.13 |
aclL2RuleStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.2.1.1.14 |
aclL3v4Rule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.3 |
aclL3v4RuleTableA table to configure L3 filter rules in the system. SEQUENCE OF AclL3v4RuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1 |
aclL3v4RuleEntryEach entry in this table is a L3 filter rule.
Index to the table is L3 filter number. AclL3v4RuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1 |
aclL3v4RuleProfileNoThe Profile ID which this rule join.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.1 |
aclL3v4RuleAccessIDL3 Filter rule ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.2 |
aclL3v4RuleDstIpAddrDestination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.3 |
aclL3v4RuleSrcIpAddrSource IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.4 |
aclL3v4RuleDstIpAddrMaskThe IP subnet mask for Destination IP address.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.5 |
aclL3v4RuleSrcIpAddrMaskThe IP subnet mask for Source IP address.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.6 |
aclL3v4RuleActionSpecifies the action to be taken on the packet if the filter
rule matches.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.7 |
aclL3v4RuleTimeRangeAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.8 |
aclL3v4RuleMatchCountNumber of times this filter is matched.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.9 |
aclL3v4RuleStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.3.1.1.10 |
aclL3v4ExtRule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.4 |
aclL3v4ExtRuleTableA table to configure L3 filter rules in the system. SEQUENCE OF AclL3v4ExtRuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1 |
aclL3v4ExtRuleEntryEach entry in this table is a L3 filter rule.
Index to the table is L3 filter number. AclL3v4ExtRuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1 |
aclL3v4ExtRuleProfileNoThe Profile ID which this rule join.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.1 |
aclL3v4ExtRuleAccessIDL3 Filter rule ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.2 |
aclL3v4ExtRuleProtocolThe type of protocol to be checked against the packet.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.3 |
aclL3v4ExtRuleFragmentsrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.4 |
aclL3v4ExtRuleICMPMessageTypeThe message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),rw Integer32 (-1..255) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.5 |
aclL3v4ExtRuleICMPMessageCodeThe message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),rw Integer32 (-1..255) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.6 |
aclL3v4ExtRuleDstIpAddrDestination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.7 |
aclL3v4ExtRuleSrcIpAddrSource IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.8 |
aclL3v4ExtRuleDstIpAddrMaskThe IP subnet mask for Destination IP address.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.9 |
aclL3v4ExtRuleSrcIpAddrMaskThe IP subnet mask for Source IP address.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.10 |
aclL3v4ExtRuleTcpUdpDstOperatorThe type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.11 |
aclL3v4ExtRuleTcpUdpDstPortThe TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.rw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.12 |
aclL3v4ExtRuleTcpUdpMinDstPortThe minimum port in the destination port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.13 |
aclL3v4ExtRuleTcpUdpMaxDstPortThe maximum port in the destination port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.14 |
aclL3v4ExtRuleTcpUdpSrcOperatorThe type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.15 |
aclL3v4ExtRuleTcpUdpSrcPortThe TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.rw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.16 |
aclL3v4ExtRuleTcpUdpMinSrcPortThe minimum port in the source port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.17 |
aclL3v4ExtRuleTcpUdpMaxSrcPortThe maximum port in the source port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.18 |
aclL3v4ExtRuleIPPrecedencerw Integer32 (-1..7) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.19 |
aclL3v4ExtRuleDscpThe IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.20 |
aclL3v4ExtRuleToSThe ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp.rw Integer32 (-1..15) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.21 |
aclL3v4ExtRuleTcpAckBitThe TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.22 |
aclL3v4ExtRuleTcpRstBitThe TCP RST bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.23 |
aclL3v4ExtRuleTcpUrgBitThe TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.24 |
aclL3v4ExtRuleTcpPshBitThe TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(3). which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.25 |
aclL3v4ExtRuleTcpSynBitThe TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.26 |
aclL3v4ExtRuleTcpFinBitThe TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.27 |
aclL3v4ExtRuleActionSpecifies the action to be taken on the packet if the filter
rule matches.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.28 |
aclL3v4ExtRuleTimeRangeAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.29 |
aclL3v4ExtRuleMatchCountNumber of times this filter is matched.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.30 |
aclL3v4ExtRuleStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.4.1.1.31 |
aclL3v6Rule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.5 |
aclL3v6RuleTableA table to configure L3 ipv6 filter rules in the system. SEQUENCE OF AclL3v6RuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1 |
aclL3v6RuleEntryEach entry in this table is a L3 ipv6 filter rule.
Index to the table is L3 ipv6 filter number. AclL3v6RuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1 |
aclL3v6RuleProfileNoThe Profile ID which this rule join.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.1 |
aclL3v6RuleAccessIDL3 Filter rule ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.2 |
aclL3v6RuleDstIpv6AddrDestination IPv6 address to be matched with the packet.rw Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.3 |
aclL3v6RuleSrcIpv6AddrSource IPv6 address to be matched with the packet.rw Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.4 |
aclL3v6RuleDstIpv6AddrPrefixLenThe prefix length for Destination IPv6 address.rw InetAddressPrefixLength .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.5 |
aclL3v6RuleSrcIpv6AddrPrefixLenThe prefix length for Source IPv6 address.rw InetAddressPrefixLength .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.6 |
aclL3v6RuleActionSpecifies the action to be taken on the packet if the filter
rule matches.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.7 |
aclL3v6RuleTimeRangeAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.8 |
aclL3v6RuleMatchCountNumber of times this filter is matched.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.9 |
aclL3v6RuleStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.5.1.1.10 |
aclL3v6ExtRule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.6 |
aclL3v6ExtRuleTableA table to configure L3 ipv6 filter rules in the system. SEQUENCE OF AclL3v6ExtRuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1 |
aclL3v6ExtRuleEntryEach entry in this table is a L3 ipv6 filter rule.
Index to the table is L3 ipv6 filter number. AclL3v6ExtRuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1 |
aclL3v6ExtRuleProfileNoThe Profile ID which this rule join.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.1 |
aclL3v6ExtRuleAccessIDL3 Filter rule ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.2 |
aclL3v6ExtRuleDscpThe IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.3 |
aclL3v6ExtRuleProtocolThe type of protocol to be checked against the packet.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.4 |
aclL3v6ExtRuleFragmentsrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.5 |
aclL3v6ExtRuleTcpUdpDstOperatorThe type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.6 |
aclL3v6ExtRuleTcpUdpDstPortThe TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.7 |
aclL3v6ExtRuleTcpUdpMinDstPortThe minimum port in the destination port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.8 |
aclL3v6ExtRuleTcpUdpMaxDstPortThe maximum port in the destination port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.9 |
aclL3v6ExtRuleTcpUdpSrcOperatorThe type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.10 |
aclL3v6ExtRuleTcpUdpSrcPortThe TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.11 |
aclL3v6ExtRuleTcpUdpMinSrcPortThe minimum port in the source port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.12 |
aclL3v6ExtRuleTcpUdpMaxSrcPortThe maximum port in the source port range.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.13 |
aclL3v6ExtRuleICMPv6MessageTypeThe message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),rw Integer32 (-1..255) .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.14 |
aclL3v6ExtRuleICMPv6MessageCodeThe message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),rw Integer32 (-1..255) .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.15 |
aclL3v6ExtRuleDstIpv6AddrDestination IPv6 address to be matched with the packet.rw Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.16 |
aclL3v6ExtRuleSrcIpv6AddrSource IPv6 address to be matched with the packet.rw Ipv6Address .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.17 |
aclL3v6ExtRuleDstIpv6AddrPrefixLenThe prefix length for Destination IPv6 address.rw InetAddressPrefixLength .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.18 |
aclL3v6ExtRuleSrcIpv6AddrPrefixLenThe prefix length for Source IPv6 address.rw InetAddressPrefixLength .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.19 |
aclL3v6ExtRuleTcpAckBitThe TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.20 |
aclL3v6ExtRuleTcpRstBitThe TCP RST bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.21 |
aclL3v6ExtRuleTcpUrgBitThe TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.22 |
aclL3v6ExtRuleTcpPshBitThe TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(3). which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.23 |
aclL3v6ExtRuleTcpSynBitThe TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.24 |
aclL3v6ExtRuleTcpFinBitThe TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.25 |
aclL3v6ExtRuleFlowLabelThe flow identifier in an IPv6 header.rw Integer32 (-1..1048575) .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.26 |
aclL3v6ExtRuleActionSpecifies the action to be taken on the packet if the filter
rule matches.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.27 |
aclL3v6ExtRuleTimeRangeAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.28 |
aclL3v6ExtRuleMatchCountNumber of times this filter is matched.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.29 |
aclL3v6ExtRuleStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.6.1.1.30 |
aclExpertExtRule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.7 |
aclExpertExtRuleTableA table to configure L3 filter rules in the system. SEQUENCE OF AclExpertExtRuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1 |
aclExpertExtRuleEntryEach entry in this table is a L3 filter rule.
Index to the table is L3 filter number. AclExpertExtRuleEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1 |
aclExpertExtRuleProfileNoThe Profile ID which this rule join.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.1 |
aclExpertExtRuleAccessIDL3 Filter rule ID.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.2 |
aclExpertExtRuleProtocolThe type of protocol to be checked against the packet.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.3 |
aclExpertExtRuleFragmentsrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.4 |
aclExpertExtRuleICMPMessageTypeThe message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),rw Integer32 (-1..255) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.5 |
aclExpertExtRuleICMPMessageCodeThe message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which means the rule don't care this
condition.
Some ICMP message codes are :
networkUnreachable(0),
hostUnreachable(1),
protocolUnreachable(2),
portUnreachable(3),
fragmentNeed(4),
sourceRouteFail(5),
destNetworkUnknown(6),
destHostUnknown(7),
srcHostIsolated(8),
destNetworkAdminProhibited(9),
destHostAdminProhibited(10),
networkUnreachableTOS(11),
hostUnreachableTOS(12),rw Integer32 (-1..255) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.6 |
aclExpertExtRuleDstIpAddrDestination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.7 |
aclExpertExtRuleSrcIpAddrSource IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.8 |
aclExpertExtRuleDstIpAddrMaskThe IP subnet mask for Destination IP address.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.9 |
aclExpertExtRuleSrcIpAddrMaskThe IP subnet mask for Source IP address.rw IpAddress .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.10 |
aclExpertExtRuleTcpUdpDstOperatorThe type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.11 |
aclExpertExtRuleTcpUdpDstPortThe TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.rw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.12 |
aclExpertExtRuleTcpUdpMinDstPortThe minimum port in the destination port range.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.13 |
aclExpertExtRuleTcpUdpMaxDstPortThe maximum port in the destination port range.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.14 |
aclExpertExtRuleTcpUdpSrcOperatorThe type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal
range(6)- compares the port value between two numbers.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.15 |
aclExpertExtRuleTcpUdpSrcPortThe TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.rw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.16 |
aclExpertExtRuleTcpUdpMinSrcPortThe minimum port in the source port range.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.17 |
aclExpertExtRuleTcpUdpMaxSrcPortThe maximum port in the source port range.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.18 |
aclExpertExtRuleIPPrecedencerw Integer32 (-1..7) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.19 |
aclExpertExtRuleDscpThe IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.20 |
aclExpertExtRuleToSThe ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp.rw Integer32 (-1..15) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.21 |
aclExpertExtRuleTcpAckBitThe TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.22 |
aclExpertExtRuleTcpRstBitThe TCP RST bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.23 |
aclExpertExtRuleTcpUrgBitThe TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.24 |
aclExpertExtRuleTcpPshBitThe TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(3). which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.25 |
aclExpertExtRuleTcpSynBitThe TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.26 |
aclExpertExtRuleTcpFinBitThe TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(3), which means the rule don't care this
condition.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.27 |
aclExpertExtRuleDstMacAddrDestination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.28 |
aclExpertExtRuleSrcMacAddrSource MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.29 |
aclExpertExtRuleVlanIdVlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.rw Integer32 (-1..4094) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.30 |
aclExpertExtRule1pPriority802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition.rw Integer32 (-1..7) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.31 |
aclExpertExtRuleDstMacAddrMaskThe MAC address Mask work for Destination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.32 |
aclExpertExtRuleSrcMacAddrMaskThe MAC address Mask work for Source MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.33 |
aclExpertExtRuleActionSpecifies the action to be taken on the packet if the filter
rule matches.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.34 |
aclExpertExtRuleTimeRangeAn administratively assigned string, which may be used
to identify the Profile.rw SnmpAdminString .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.35 |
aclExpertExtRuleMatchCountNumber of times this filter is matched.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.36 |
aclExpertExtRuleStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.7.1.7.1.1.37 |
aclPortBindGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.7.1.8 |
aclPortGroupTableA table to control the port group binding information of L2 Group,
L3v4 Group, and L3v6 Group SEQUENCE OF AclPortGroupEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1 |
aclPortGroupEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. AclPortGroupEntry .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1 |
aclPortIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.1 |
aclPortDirectionSpecifies the action to be taken on the packet if the filter
rule matches.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.2 |
aclPortL2ProfileNoThe L2 Profile ID which this port bind.
zero means not configured.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.3 |
aclPortL3v4StdProfileNoThe L3v4 Profile ID which this port bind.
zero means not configured.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.4 |
aclPortL3v4ExtProfileNoThe L3v4 Profile ID which this port bind.
zero means not configured.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.5 |
aclPortL3v6StdProfileNoThe L3v6 Profile ID which this port bind.
zero means not configured.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.6 |
aclPortL3v6ExtProfileNoThe L3v6 Profile ID which this port bind.
zero means not configured.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.7 |
aclPortExpertProfileNoThe L3v6 Profile ID which this port bind.
zero means not configured.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.7.1.8.1.1.8 |
dlinkSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8 |
securityportSecurityGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.1 |
portSecurityGlobalSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.1.1 |
portSecurityTrapStateThis Object is used to enbale or disable the transmission of trap notification
messages. A vector of Boolean notification types, used to enable or disable the
client notification types:
PortSecExceedMLA(0)
When the bit 'PortSecExceedMLA(0)' is set, a trap will be send out
when learnt mac entries exceed the Max learning number for the specific
port .rw Bits .1.3.6.1.4.1.171.10.139.3.1.8.1.1.1 |
portSecurityTrapRatePort Security Trap Rate Settings. Trap Rate (0-1000)rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.1.2 |
portSecuritySysMaxAddrPort Security System Settings. Trap Rate System Maximum Address (1-6656)rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.1.3 |
portSecurityPortSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.1.2 |
portSecurityTablePort Security Port Settings table. SEQUENCE OF PortSecurityEntry .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1 |
portSecurityEntryThe Port Security Port Settings entry. PortSecurityEntry .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1 |
portSecurityPortThis object indicates the port index.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.1 |
portSecurityStateThis object indicates the Port Security Port Settings state.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.2 |
portSecuritySysMaxPort Security Port Settings. Maximum (1-6656)rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.3 |
portSecurityVioActionPort Security Port Settings. Violation Actionrw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.4 |
portSecuritySecurModePort Security Port Settings. Security Mode
permanent(1) - Under this mode all learned MAC addresses won't be
purged unless a user deletes these entries manually.
deleteOnTimeout(2) - Under this mode all learned MAC addresses
will be purged when an entry ages out or a user deletes
these entries manually.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.5 |
portSecurityAgingTimePort Security Port Settings. Aging Time (0-1440)rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.6 |
portSecurityAgingTypePort Security Port Settings. Aging Type.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.7 |
portSecurityCurrentNoPort Security Port Settings. Current No.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.8 |
portSecurityVioCountPort Security Port Settings. Violation Count.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.9 |
portSecurityCurStatePort Security Port Settings. Current State.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.1.2.1.1.10 |
portSecurityAddressEntries OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.1.3 |
portSecAddrTablePort Security Address Entries table. SEQUENCE OF PortSecurityAddrEntry .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1 |
portSecAddrEntryPort Security Address Entries entry. PortSecurityAddrEntry .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1 |
portSecAddrVIDPort Security Address Entries . VID.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1.1 |
portSecAddrMACPort Security Address Entries. MAC Addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1.2 |
portSecAddrPortThis object indicates the port index.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1.3 |
portSecAddrTypeThis object indicates the secure mode.
For manually configured secure MAC addresses, the portSecAddrType is
permanent.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1.4 |
portSecAddrRowStatusThis object indicates the port security mac table entry RowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1.5 |
portSecAddrRemainTimePort Security Address Entries. Remaining Time (mins).ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.1.3.1.1.6 |
portSecurityTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.1.4 |
portSecurityTrapList OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.1.4.0 |
portSecurityViolationThis is a trap that will send to snmp manager,and it will be generated when the learnt mac entries num exceed the MLA of
the specific port when port security is enable for this port . NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.8.1.4.0.1 |
securityDhcpSerScrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.7 |
dhcpSerScrGlobSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.7.1 |
dhcpSerScrGlobTrapStateDHCP Server Screening Global Settings. Trap State.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.7.1.1 |
dhcpSerScrLogBufEntriesDHCP Server Screening Global Settings. Log Buffer Entries.rw INTEGER .1.3.6.1.4.1.171.10.139.3.1.8.7.1.2 |
dhcpSerScrLogClearClears the buffered logs.
This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.3 |
dhcpSerScrProfileTableA table to configure dhcp server screen profile information. SEQUENCE OF DhcpSerScrProfileEntry .1.3.6.1.4.1.171.10.139.3.1.8.7.1.4 |
dhcpSerScrProfileEntryA list of entries to configure dhcp server screen profile information. DhcpSerScrProfileEntry .1.3.6.1.4.1.171.10.139.3.1.8.7.1.4.1 |
dhcpSerScrProfileNameThe DSS Profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.4.1.1 |
dhcpSerScrProfileClientMacThe DSS Profile Client MAC.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.4.1.2 |
dhcpSerScrProfileRowStatusThe row status of an entry in the dhcp server screen profile Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.4.1.3 |
dhcpSerScrLogTableLog Entries in the table are automatically created when dhcp server
screen violation occurence. SEQUENCE OF DhcpSerScrLogEntry .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5 |
dhcpSerScrLogEntryAn entry in the dhcpSerScrLogTable. Entries are automatically created
whenever dhcp server screen violation occurence. DhcpSerScrLogEntry .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5.1 |
dhcpSerScrLogIndexDhcp server screening log entry index.ro Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5.1.1 |
dhcpSerScrLogVlanIDdhcp server screening log vlan id infomation.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5.1.2 |
dhcpSerScrLogIPAddrdhcp server screening log ip infomation.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5.1.3 |
dhcpSerScrLogMacAddrdhcp server screening log mac address infomation.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5.1.4 |
dhcpSerScrLogOccurrencedhcp server screening log occurrence infomation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.1.5.1.5 |
dhcpSerScrPortSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.7.2 |
dhcpSerScrPortTableThe table of DHCP Server Screening Port Settings. SEQUENCE OF DhcpSerScrPortEntry .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1 |
dhcpSerScrPortEntryThe list of DHCP Server Screening Port Settings entry. DhcpSerScrPortEntry .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1.1 |
dhcpSerScrPortIndexDHCP Server Screening Port Settings . Port.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1.1.1 |
dhcpSerScrPortStateDHCP Server Screening Port Settings. State.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1.1.2 |
dhcpSerScrPortServerAddrTypeDHCP Server Screening IP Type: IPv4/IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1.1.3 |
dhcpSerScrPortServerIPDHCP Server Screening Port Settings. Server IP.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1.1.4 |
dhcpSerScrPortProfileNameDHCP Server Screening Port Settings. Profile Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.7.2.1.1.5 |
dhcpSerScrTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.7.3 |
dhcpSerScrTrapList OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.7.3.0 |
dhcpSerScrAttackDetectThis is a trap that will send to snmp manager,and it will be generated when the forge dhcp server
packets received when dhcp server screening is enable for this port. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.8.7.3.0.1 |
securitySafeGuardGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.13 |
safeGuardEnableThis object is used to set Safeguard Enable/Disable.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.13.1 |
securityTrustedHostGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.14 |
trustedHostTableA table to configure trusted host in the system. SEQUENCE OF TrustedHostEntry .1.3.6.1.4.1.171.10.139.3.1.8.14.1 |
trustedHostEntryEach entry in this table represents rules for particular
trusted host. TrustedHostEntry .1.3.6.1.4.1.171.10.139.3.1.8.14.1.1 |
trustedHostTypeType of trusted host.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.14.1.1.1 |
trustedHostACLNameACL access list name.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.8.14.1.1.2 |
trustedHostRowStatusThe status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.14.1.1.3 |
securityTrafficSegmentationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.15 |
trafficSegmentationTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF TrafficSegmentationEntry .1.3.6.1.4.1.171.10.139.3.1.8.15.1 |
trafficSegmentationEntryThere is one entry in this table for each created
port-channel port TrafficSegmentationEntry .1.3.6.1.4.1.171.10.139.3.1.8.15.1.1 |
trafficSegmentationIfIndexThe ifIndex of the port-channel(Aggregator's
interface index).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.8.15.1.1.1 |
trafficSegmentationMemberListPort list of port channel.rw PortList .1.3.6.1.4.1.171.10.139.3.1.8.15.1.1.2 |
securityStormCtrlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.16 |
stormCtrlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.16.1 |
stormCtrlGentrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1 |
stormCtrlNotifyEnableThis object controls when a storm control notification will be generated.
If the object is set to
none(0): No notifications will be generated.
stormOccurred(1): A notification will be generated when a storm event is
detected.
stormCleared(2): A notification will be generated when a storm event is
cleared.
both (3): A notification will be generated both when a storm event is
detected and cleared.
NOTE:The default value of this object is none(0).rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.1 |
stormCtrlPollingIntervalThe interval, in seconds, the switch detects the storm.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.2 |
stormCtrlPollingRetriesSpecify the retry count. If the action is configured
as 'shutdown' mode and storm keep as long as
interval * retries, the port will enters error-disabled state.
The effective range is from 1 to 360.
0 means that a 'shutdown' mode port will directly enter
error-disabled state when storm is detected.
-1 means that a 'shutdown' mode port will never enter
error-disabled state even if storm is detected.rw Integer32 (-1 | 0 | 1.. 360) .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.3 |
stormCtrlTableThe traffic control table. SEQUENCE OF StormCtrlEntry .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.4 |
stormCtrlEntryThe traffic control entry. StormCtrlEntry .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.4.1 |
stormCtrlIndexThe traffic control index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.4.1.1 |
stormCtrlActionModeThe action mode of traffic control.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.4.1.2 |
stormCtrlLevelTypeThe Traffic control level type: pps or kbps.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.4.1.3 |
stormCtrlThresholdTableThe traffic control table. SEQUENCE OF StormCtrlThresholdEntry .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5 |
stormCtrlThresholdEntryThe traffic control entry. StormCtrlThresholdEntry .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1 |
stormCtrlThresholdIndexThe traffic control index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1.1 |
stormCtrlThresholdTypeThe control type of traffic control.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1.2 |
stormCtrlThresholdRiseThreThe rise threshold of traffic control.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1.3 |
stormCtrlThresholdLowThreThe low threshold of traffic control.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1.4 |
stormCtrlThresholdCurrRateThe current rate of traffic control.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1.5 |
stormCtrlThresholdStormStateThis object indicates the current status of storm control on a
given interface for a given traffic type.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.5.1.6 |
stormCtrlTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.6 |
stormCtrlTrapsList OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.6.0 |
stormCtrlTrapsStormOccurThis is a trap that will send to snmp manager,and it will be generated when storm is occured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.6.0.1 |
stormCtrlTrapsStormClearThis is a trap that will send to snmp manager,and it will be generated when port is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.139.3.1.8.16.1.1.6.0.2 |
securityDoSprevGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.17 |
doSCtrlTableA table that holds the DoS prevention settings of the device. SEQUENCE OF DoSCtrlEntry .1.3.6.1.4.1.171.10.139.3.1.8.17.1 |
doSCtrlEntryA list of DoS prevention settings of the device. DoSCtrlEntry .1.3.6.1.4.1.171.10.139.3.1.8.17.1.1 |
doSCtrlTypeThis object indicates the DoS prevention type.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.17.1.1.1 |
doSCtrlStateThis object indicates the status of the DoS prevention type.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.17.1.1.2 |
doSCtrlActionTypeThis object indicates the action for the DoS prevention type.
If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration
will not take effect until a valid mirror port is specified. If mirror port is not valid
the behavior will be the same as 'drop'rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.17.1.1.3 |
securitySSLGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.19 |
sslObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.19.1 |
sslServerStatusThis object is for enabling or disabling secure HTTP in the system.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.8.19.1.1 |
servicePolicyNameIndicates the name of the policy for SSL application.
This node is volatile; that is, it is lost if the SNMP
agent is rebooted.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.8.19.1.2 |
sslConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4 |
sslServicePolicyTableA table controlls the parameters of SSL service policies. SEQUENCE OF SslServicePolicyEntry .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4.3 |
sslServicePolicyEntryThe row in the dSslServicePolicyTable containing the
parameters of a SSL service policy.
An entry is created/removed when a name for a specific
policy is generated or deleted via CLI or by issuing appropriate
sets to this table using snmp. SslServicePolicyEntry .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4.3.1 |
sslServicePolicyNameIndicates the name of the policy for which this entry pertains to.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4.3.1.1 |
sslServicePolicyCipherSuitesThis object is to configure the cipher-suites list.
This field is a bit mask, setting a bit indicates that the
corresponding cipher-list will be involved in the server
authentication.
In the FIPS (American Security Standard Mode) Mode,
Only the following cipher list should be supported.
TLS_RSA_3DES_SHA1
TLS_ DHE_RSA_3DES_SHA1
TLS_RSA_WITH_AES_128_CBC_SHA
TLS_RSA_WITH_AES_256_CBC_SHA
TLS_DHE_RSA_WITH_AES_128_CBC_SHA
TLS_DHE_RSA_WITH_AES_256_CBC_SHA
hence the default value in FIPS mode will be
TLS_RSA_3DES_SHA1 | TLS_ DHE_RSA_3DES_SHA1 | TLS_RSA_WITH_AES_128_CBC_SHA |
TLS_RSA_WITH_AES_256_CBC_SHA | TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
TLS_DHE_RSA_WITH_AES_256_CBC_SHArw Bits .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4.3.1.2 |
sslServicePolicyCacheTimeoutThis object indicates the Cache Timeout value in the policy for
SSL module to refresh the session resume data kept in database.rw Unsigned32 .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4.3.1.4 |
sslServicePolicyRowStatusStatus of this policy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.8.19.1.4.3.1.5 |
dlinkOAM OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.9 |
oamCableDiagGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.9.1 |
cableDiagTriggerIndexTrigger an interface index to do virtual cable test.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.1 |
cableDiagTestPairTableA table to get pair state and pair len. SEQUENCE OF CableDiagTestPairEntry .1.3.6.1.4.1.171.10.139.3.1.9.1.2 |
cableDiagTestPairEntryAn entry appears in this table for each interface
Test in the system. CableDiagTestPairEntry .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1 |
cableDiagTestPortPairRecord the cable diagnostic Test Port.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.1 |
cableDiagTestResultPair1virtual cable test pair1 test result.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.2 |
cableDiagTestResultPair2virtual cable test pair2 test result.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.3 |
cableDiagTestResultPair3virtual cable test pair3 test result.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.4 |
cableDiagTestResultPair4virtual cable test pair4 test result.ro Enumeration .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.5 |
cableDiagTestLenPair1virtual cable test pair1 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.6 |
cableDiagTestLenPair2virtual cable test pair2 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.7 |
cableDiagTestLenPair3virtual cable test pair3 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.8 |
cableDiagTestLenPair4virtual cable test pair4 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.9 |
cableDiagTestLenPairClearClear virtual cable test results.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.9.1.2.1.10 |
dlinkMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.10 |
monStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.10.2 |
statisticsCounters OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.10.2.1 |
statisticsCountersTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF StatisticsEntry .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1 |
statisticsCountersEntryAn entry containing management information applicable to a
particular interface. StatisticsEntry .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1 |
statPortro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.1 |
statPortRxRateBytesPort RX Rate bytes/sec.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.2 |
statPortRxRatePacketsPort RX Rate Packets/sec.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.3 |
statPortRxTotalBytesPort Rx Total Bytes/sec.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.4 |
statPortRxTotalPacketsPort Rx Total Packets/sec.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.5 |
statPortTxRateBytesPort Tx Rate Bytes/sec.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.6 |
statPortTxRatePacketsPort Tx Rate Packets/sec.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.7 |
statPortTxTotalBytesPort Tx Total Bytes/sec.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.8 |
statPortTxTotalPacketsPort Tx Total Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.9 |
statPortRxMulticastPort Rx multicast Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.10 |
statPortRxUnicastPort Rx unicast Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.11 |
statPortRxBroadcastPort Rx broadcast Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.12 |
statPortTxMulticastPort Tx multicast Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.13 |
statPortTxUnicastPort Tx unicast Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.14 |
statPortTxBroadcastPort Tx broadcast Packets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.15 |
statCountersrxHCPkt64Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.16 |
statCountersrxHCPkt65to127Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.17 |
statCountersrxHCPkt128to255Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.18 |
statCountersrxHCPkt256to511Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.19 |
statCountersrxHCPkt512to1023Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.20 |
statCountersrxHCPkt1024to1518Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.21 |
statCountersrxHCPkt1519to2047Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.22 |
statCountersrxHCPkt2048to4095Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.23 |
statCountersrxHCPkt4096to9216Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.24 |
statCounterstxHCPkt64Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.25 |
statCounterstxHCPkt65to127Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.26 |
statCounterstxHCPkt128to255Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.27 |
statCounterstxHCPkt256to511Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.28 |
statCounterstxHCPkt512to1023Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.29 |
statCounterstxHCPkt1024to1518Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.30 |
statCounterstxHCPkt1519to2047Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.31 |
statCounterstxHCPkt2048to4095Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.32 |
statCounterstxHCPkt4096to9216Octets.ro Counter64 .1.3.6.1.4.1.171.10.139.3.1.10.2.1.1.1.33 |
statisticsErrorCounters OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.10.2.2 |
statisticsErrorTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF StatisticsErrorEntry .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1 |
statisticsErrorEntryAn entry containing management information applicable to a
particular interface. StatisticsErrorEntry .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1 |
statPortCountPortA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.1 |
statCountersrxDroppkts.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.2 |
statCountersrxMTUDropPkts.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.3 |
statPortCountDeferredTxA count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.4 |
statCountersdot3StatsSingleColFrames.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.5 |
statPortCountExcessColA count of frames for which transmission on a
particular interface fails due to excessive
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.6 |
statPortCountLateColThe number of times that a collision is
detected on a particular interface later than
one slotTime into the transmission of a packet.
A (late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.7 |
statPortCountAlignErr.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.8 |
statPortCountFCSErrA count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received with
frame-too-long or frame-too-short error.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
Note: Coding errors detected by the physical
layer for speeds above 10 Mb/s will cause the
frame to fail the FCS check.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFCSErrors object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.9 |
statCountersifOutDiscards.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.10 |
statPortCountMultiCol.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.11 |
statPortCountCarriSen.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.12 |
statPortCountSQETestErr.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.13 |
statCountersdot3StatsDeferredTransmisions.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.14 |
statPortCountIntMacTxA count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsLateCollisions object, the
dot3StatsExcessiveCollisions object, or the
dot3StatsCarrierSenseErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of transmission
errors on a particular interface that are not
otherwise counted.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsInternalMacTransmitErrors object for
10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.15 |
statPortCountIntMacRxA count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, or the
dot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsInternalMacReceiveErrors object for
10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.16 |
statCountersrxCRCAlignErrors.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.17 |
statCountersrxUndersizedPkts.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.18 |
statCountersrxOversizedPkts.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.19 |
statCountersrxFragmentPkts.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.20 |
statCountersrxJabbers.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.21 |
statCountersrxSymbolErrors.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.22 |
statCountersrxMulticastDropPkts.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.23 |
statCountersifInErrors.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.24 |
statCountersifOutErrors.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.25 |
statCountersifInDiscards.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.26 |
statCountersifInUnknownProtos.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.27 |
statCounterstxDelayExceededDiscards.ro Counter32 .1.3.6.1.4.1.171.10.139.3.1.10.2.2.1.1.28 |
statisticsClear OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.10.2.3 |
statisticsCounterClearTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF StatCounterClearEntry .1.3.6.1.4.1.171.10.139.3.1.10.2.3.1 |
statisticsCounterClearEntryAn entry containing management information applicable to a
particular interface. StatCounterClearEntry .1.3.6.1.4.1.171.10.139.3.1.10.2.3.1.1 |
statCounterClearIndexA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.10.2.3.1.1.1 |
statCounterClearStatusEnable or disable statCounter Counters Clear on read by port.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.10.2.3.1.1.2 |
statCounterLinkChangeCounter the linkchange times by port.ro INTEGER .1.3.6.1.4.1.171.10.139.3.1.10.2.3.1.1.3 |
monMirrorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.10.3 |
mirrorSessionTableA table to Session Table. SEQUENCE OF MirrorSessionEntry .1.3.6.1.4.1.171.10.139.3.1.10.3.1 |
mirrorSessionEntryAn entry appears in Session Table. MirrorSessionEntry .1.3.6.1.4.1.171.10.139.3.1.10.3.1.1 |
mirrorSessionNumberSpecifies the port to which the mirrored traffic in the system
is to be copied.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.10.3.1.1.1 |
mirrorDestinationPortMirror Settings. Destination port.rw Integer32 .1.3.6.1.4.1.171.10.139.3.1.10.3.1.1.2 |
mirrorSourceIngressPortThis object indicates the port index.rw PortList .1.3.6.1.4.1.171.10.139.3.1.10.3.1.1.3 |
mirrorSourceEgressPortThis object indicates the port index.rw PortList .1.3.6.1.4.1.171.10.139.3.1.10.3.1.1.4 |
mirrorSessionRowStatusSpecifies the validity of the entry, max entry number is 4.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.139.3.1.10.3.1.1.5 |
dlinkGreen OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.11 |
dlinkPowersavingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.11.1 |
powerSavingGlobalSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.11.1.1 |
psgFunctionVersionPower Saving Global Settings Function Version.ro DisplayString .1.3.6.1.4.1.171.10.139.3.1.11.1.1.1 |
psgScheduledPortShutdownScheduled Port-shutdown Power Saving.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.11.1.1.2 |
psgScheduledHibernationScheduled Hibernation Power Saving.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.11.1.1.3 |
psgScheduledDimLEDScheduled Dim-LED Power Saving.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.11.1.1.4 |
psgAdministrativeDimLEDAdministrative Dim-LED.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.11.1.1.5 |
powerSavingTimeRangeSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.11.1.2 |
psgDimLEDShutOffTimeProfileThe time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.11.1.2.1 |
psgHibernationTimeProfileThe time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.11.1.2.2 |
powerSavingShutdownSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.11.1.3 |
powerSavingShutdownTableThe table of Power Saving Shutdown. SEQUENCE OF PowerSavingShutdownEntry .1.3.6.1.4.1.171.10.139.3.1.11.1.3.1 |
powerSavingShutdownEntryThe list of Power Saving Shutdown entry. PowerSavingShutdownEntry .1.3.6.1.4.1.171.10.139.3.1.11.1.3.1.1 |
psShutdownPortSNMP Linkchange Trap Settings.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.11.1.3.1.1.1 |
psShutdownTimeRangeTime Range Settings Name.rw DisplayString .1.3.6.1.4.1.171.10.139.3.1.11.1.3.1.1.2 |
dlinkEEEGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.139.3.1.11.2 |
greenEeeTableThe port eee table. SEQUENCE OF GreenEeeEntry .1.3.6.1.4.1.171.10.139.3.1.11.2.1 |
greenEeeEntryThe port eee entry. GreenEeeEntry .1.3.6.1.4.1.171.10.139.3.1.11.2.1.1 |
eeePortThis object indicates the port index.ro Integer32 .1.3.6.1.4.1.171.10.139.3.1.11.2.1.1.1 |
eeestateThis object indicates the port eee state.rw Enumeration .1.3.6.1.4.1.171.10.139.3.1.11.2.1.1.2 |