DHCPCLIENT-PRIVATE-MIB
The DHCPCLIENT-PRIVATE-MIB provides vendor-specific monitoring of DHCP client operational states, including lease acquisition status, transaction counters, and binding table details for the local host. This module enables the tracking of DHCP negotiation failures, IP address assignment events, and renewal cycles on the specific device implementing the private extension.
Imported Objects
Objects
14 total| Object Name |
|---|
dhcpClientPrivateThe Private MIB for DHCP Client MODULE-IDENTITY .1.3.6.1.4.1.52642.1.100 |
agentdhcp4ClientLeaseParameters OBJECT IDENTIFIER .1.3.6.1.4.1.52642.1.100.1 |
agentdhcp4ClientLeaseParametersTableDisplays DHCP Client Lease Information. SEQUENCE OF Agentdhcp4ClientLeaseParametersEntry .1.3.6.1.4.1.52642.1.100.1.1 |
agentdhcp4ClientLeaseParametersEntryInformation about a table entry. Agentdhcp4ClientLeaseParametersEntry .1.3.6.1.4.1.52642.1.100.1.1.1 |
agentdhcp4ClientInterfaceIndexThe Interface index on which the IP address was leased by the DHCP Server. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.52642.1.100.1.1.1.1 |
agentdhcp4ClientIpAddressThe IP Address leased by the DHCP Server .ro IpAddress .1.3.6.1.4.1.52642.1.100.1.1.1.2 |
agentdhcp4ClientSubnetMaskThe Subnet mask of the IP Address leased by the DHCP Server .ro IpAddress .1.3.6.1.4.1.52642.1.100.1.1.1.3 |
agentdhcp4ClientDhcpServerAddressThe IP Address of the DHCP Server that leased the IP Address .ro IpAddress .1.3.6.1.4.1.52642.1.100.1.1.1.4 |
agentdhcp4ClientStateThe State of the DHCP Client on this interface .ro Enumeration .1.3.6.1.4.1.52642.1.100.1.1.1.5 |
agentdhcp4ClientTransactionIDThe transaction ID of the DHCP Client .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.52642.1.100.1.1.1.6 |
agentdhcp4ClientLeaseTimeThe time remaining since the IP address is leased by the DHCP Server.It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52642.1.100.1.1.1.7 |
agentdhcp4ClientRenewTimeThe time remaining to send the next DHCP Renew Request by DHCP Client to renew the leased IP address. It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52642.1.100.1.1.1.8 |
agentdhcp4ClientRebindTimeThe time remaining to start the DHCP Rebind process. It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.52642.1.100.1.1.1.9 |
agentdhcp4ClientRetryCountThe number of times the DHCP Client sends a DHCP REQUEST message before the server responds .ro Counter32 .1.3.6.1.4.1.52642.1.100.1.1.1.10 |
More MIBs from FS.com
Browse all FS.comMIBs →The FS-MIB module enables SNMP-based monitoring and management of FS.com fs-Series network switches, exposing standard interface statistics, system resources, and environmental sensor data. It provides granular visibility into port status, traffic counters, temperature readings, and power supply states for operational troubleshooting and capacity planning.
The SWITCH MIB module provides SNMP access to the system-level attributes of network switches, including device identification, operational status, and hardware health metrics. It enables centralized monitoring of switch inventory, uptime, and configuration parameters across the network infrastructure.
The FS-SWITCH-V2-MIB module enables monitoring of system-level hardware and software metrics, including device identity, operational status, and environmental sensors, for FS (FiberStore) network switches via the Simple Network Management Protocol.
The FS-SYSTEM-MIB module provides standard SNMP interfaces for monitoring and managing system-level telemetry on FS (FiberStore) networking hardware, including CPU utilization, memory usage, temperature sensors, fan status, and system uptime.
The FS-FIBER-MIB enables monitoring of optical transceiver parameters and fiber link status on FS (FiberStore) network hardware via SNMP, specifically tracking metrics such as optical power levels, laser bias currents, temperature, and voltage.
The FS-AC-MGMT-MIB module enables SNMP-based monitoring and configuration of Fortinet Access Controller (AC) devices, specifically tracking wireless session states, client association metrics, radio interface statistics, and access point operational parameters.