DGS-1100-10ME_A1
AI MIB Summary
Standard SNMP MIB module defining data structures for DGS-1100-10ME_A1.
1415
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
1415 total| Object Name |
|---|
d-link OBJECT IDENTIFIER .1.3.6.1.4.1.171 |
dlink-products OBJECT IDENTIFIER .1.3.6.1.4.1.171.10 |
dlink-DGS1100SeriesProd OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134 |
dgs-1100-10ME OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2 |
dgs-1100-10ME_A1 OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1 |
companySystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.1 |
sysDevInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.1.1 |
sysSwitchNameSystem name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character: ( ) V + _ = .rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.1.1 |
sysHardwareVersionVersion number of the Hardware.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.1.2 |
sysFirmwareVersionVersion number of the Firmware.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.1.3 |
sysDeviceTypeA textual description of the entity. This value should
include the full name and version identification of
the system's hardware type, software operating-system,
and networking software.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.1.4 |
sysBootVerionVersion number of the BootLoader.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.1.5 |
sysLoginTimeoutThis time is used to count the time and
logout web or telnet interface automatically.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.2 |
sysLocationNameThe location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.3 |
sysContactThe textual identification of the contact person for
this managed node, together with information on how
to contact this person. If no contact information is
known, the value is the zero-length string.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.4 |
sysSafeGuardEnableThis object is used to set Safeguard Enable\Disable.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.8 |
sysRestartThis object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again.
This objects also allows user to reset swith(all configuration
set to default) and reset switch without ip(except ip configuration
saved, configuration set to default) and reset switch without ip and
vlan(except ip and vlan configuration saved, configuration set to default)
When the switch operationally goes down, configuration
save operation is initiated based on the configuration save
option chosen.
When the switch operationally come up, the saved configurations
are restored based on the restore option chosen.
Once the switch is restarted, the value of this object reverts
to noreboot.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.9 |
sysSaveThis object is used to save Configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.1.10 |
sysJumboFrameEnableGigabit Web Smart Switches support jumbo frames (frames larger than
the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged).
Default jumbo frame is disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.12 |
sysDhcpAutoConfigurationThis object indicates auto config is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.16 |
sysWebStateThis object is for Enabled(1) or Disabled(2) Web state in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.17 |
sysWebPortNumberWeb Server Port Number.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.18 |
sysARPAgingTimeThis object is for ARP aging time.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.19 |
sysMACAgingTimeThis object is for MAC aging time.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.20 |
sysTelnetsettingManagementOnOffEnable/Disable management Telnetsetting mechanism.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.23 |
sysTelnetUDPPortThe value is for setting telnet's UDP Port.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.24 |
sysAutoRefreshConfigurationTo set the WEB panel auto refresh timer.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.25 |
sysMacAddrEthernet address (base address) of the Switch.
This base Mac Address, if modified, will take effect only when the
Switch is restarted.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.1.26 |
sysSwitchTimeThe date is configured in the switch in the format,
Hours:Minutes:Seconds Day Month Year
e.g 19:10:31 11 08 2005
01-12 Month - beginning from January to December
The railway time 00 to 24 hours can be configured and
displayed.
The Display of the date is in the format ,
WeekDay Month Day Hours:Minutes:Seconds Year
e.g 04 09 21 18:11:30 2005
01-07 WeekDay - beginning from Sunday to Saturday
01-12 Month - beginning from January to Decemberrw DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.27 |
sysDhcpTimeoutThis is DHCP auto configuration timeout, the maxium time in seconds to wait before terminate.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.28 |
sysSerialNumberThe serial number assigned to this nvram sub-unitro DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.29 |
sysCPU OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.1.30 |
cpuLast5SecUsageIndicates the average CPU usage in last 5 second of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.30.1 |
cpuLast1MinUsageIndicates the average CPU usage in last 1 minute of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.30.2 |
cpuLast5MinUsageIndicates the average CPU usage in last 5 minute of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.30.3 |
sysRAM OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.1.31 |
ramLast5SecUsageIndicates the average RAM usage in last 5 second of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.31.1 |
ramLast1MinUsageIndicates the average RAM usage in last 1 minute of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.31.2 |
ramLast5MinUsageIndicates the average RAM usage in last 5 minute of the switch in percentagero Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.31.3 |
sysCliPromptStrCli Prompt string, some special value definition as below:
1. default - represent using the default value;
2. username - using the current login username;rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.32 |
sysSshStateEnable/Disable management SSH .rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.33 |
sysSshPortNumberThe value is for setting SSH's tcp Port.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.34 |
sysPort OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.1.100 |
portCtrlTableA table to control the port specific parameters of the device like speed,
duplex mode, etc. SEQUENCE OF PortCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.1 |
portCtrlEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. PortCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1 |
portCtrlIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.1 |
portCtrlMediumTypeThis object indicates the port type: fiber 1G/100M or copper.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.2 |
portCtrlSpeedConfigures port speed which the mediatype is match with portCtrlDetailMediumType.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.3 |
portCtrlLinkStatusThe port's operating speed state.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.4 |
portCtrlMDIConfigures interface auto/mdi/mdix mode.
The default setting is Auto.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.5 |
portCtrlFlowControlEnables / disables flow control for the interface.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.6 |
portCtrlFlowControlOperShow Enables / disables status of flow control for the interface.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.7 |
portCtrlAdminStateEnables / disables Admin for the interface.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.8 |
portCtrlDetailMediumTypeGet the port's current media typero Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.9 |
portCtrlDynamicMacAutoLearnEnables / disables dynamic mac auto learning for the interface.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.1.1.10 |
portDescriptionTableThe port description table. SEQUENCE OF PortDescriptionEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.2 |
portDescriptionEntryThe port description entry. PortDescriptionEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.2.1 |
portDescIndexThis object indicates the port index.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.1.100.2.1.1 |
portDescMediumTypeThis object indicates the port type: fiber or copper.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.2.1.2 |
portDescStringThis object indicates the port description.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.1.100.2.1.3 |
portErrTableThe port error table. SEQUENCE OF PortErrEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.3 |
portErrEntryA list of information for the err port of the device. PortErrEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.3.1 |
portErrPortIndexThis object indicates the module's port number.(1..Max port number in
the module)ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.1 |
portErrPortStateThis object decides whether the port state is enabled or disabled.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.2 |
portErrPortStatusThis object decides whether the PortStatus is err-disabled.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.3 |
portErrPortReasonThis object decides whether the PortStatus is
LBD, Traffic Control, DULD.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.1.100.3.1.4 |
portUtilizTableA table to display the TX/RX frames per second and port utilization. SEQUENCE OF PortUtilizEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.4 |
portUtilizEntryAn entry appears in this table for each interface in the system.
Index to the table is the interface index of the port. PortUtilizEntry .1.3.6.1.4.1.171.10.134.2.1.1.100.4.1 |
portUtilizIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.1 |
portUtilizTXThe total number of frames forwarded on the interface during last second.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.2 |
portUtilizRXThe total number of frames received on the interface during last second.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.3 |
portUtilizAverageinterface frame usage during last second.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.1.100.4.1.4 |
companyIpifGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.2 |
sysIpifSupportV4V6Info OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.2.7 |
ipv4AddrCfgModeSpecifies the means by which the default interface in the device
gets the IP address.
If 'manual' mode is selected, the default interface takes the
default IPv4 address configured in the system.
If 'dynamic' mode is selected, the default interface gets the IP address
through dynamic IP address configuration protocols such as RARP client,
BootP client, DHCP Client, etc.
If the system fails to get the IP address dynamically through all the
above protocols, the default interface uses the default IPv4 address
configured in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.1 |
ipv4AddressDefault IP Address of the system.
This IP address, if modified, will take effect only when the
configuration is stored & restored.rw IpAddress .1.3.6.1.4.1.171.10.134.2.1.2.7.2 |
ipv4SubnetMaskIP subnet mask for the default IP address.
This subnet mask, if modified, will take effect only when the
configuration is stored & restored.rw IpAddress .1.3.6.1.4.1.171.10.134.2.1.2.7.3 |
ipv4DefaultGatewayGatewayrw IpAddress .1.3.6.1.4.1.171.10.134.2.1.2.7.4 |
dhcpOption12StatusStatus of DHCP Option12rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.5 |
dhcpOption12HostNameHost name in DHCP option 12rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.2.7.6 |
ipv6GlobalStatusThe state of IPv6 function.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.9 |
ipv6DHCPStatusThe state of DHCPv6 that you want this interface to be in.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.10 |
ipv6AutolinkloStatusThis object is to set the status of ipv6 link local address auto-generated.
if set enabled, system will auto-generate a link-local ipv6 address by switch
base mac addree. if set disabled, link-local address will be configured by mannual.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.11 |
ipv6NSRetransmitTimeThe NS's retransmit time that you want this interface to be inrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.2.7.12 |
ipv6DefaultRouteTableThis table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes. SEQUENCE OF Ipv6DefaultRouteEntry .1.3.6.1.4.1.171.10.134.2.1.2.7.13 |
ipv6DefaultRouteEntryAn entry in the IPv6 Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured. There
can be a static route as well as dynamic routes with the
same destination and prefix length. Ipv6DefaultRouteEntry .1.3.6.1.4.1.171.10.134.2.1.2.7.13.1 |
ipv6DefaultRouteProtocolThe routing mechanism via which this route was
learned. If it has value local(2), it indicates this
route was derived from a configured address prefix.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.3 |
ipv6DefaultRouteNextHopNext hop IPv6 Address for this route. For direct routes
it has the value ::0.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.4 |
ipv6DefaultRouteIfIndexThe index value which uniquely identifies the interface
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
ipv6IfIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.5 |
ipv6DefaultRouteMetricThe routing metric associated with this route.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.6 |
ipv6DefaultRouteAdminStatusAdministrative Status of the route. This object is used
to create or delete the route entry. The ipv6DefaultRouteIfIndex
needs to be set, before the route entry is made active.
CreateAndGo is not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.2.7.13.1.10 |
ipv6AddressTableA list of interface entries. SEQUENCE OF Ipv6AddressEntry .1.3.6.1.4.1.171.10.134.2.1.2.7.14 |
ipv6AddressEntryAn entry containing management information applicable
to a particular interface. Ipv6AddressEntry .1.3.6.1.4.1.171.10.134.2.1.2.7.14.1 |
ipv6AddressMainIndexThe index of this IPv6 entry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.1 |
ipv6AddressIpAddrThe ip address of this IPv6 entry.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.2 |
ipv6AddressIpPrefixThe ip prefix of this IPv6 entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.3 |
ipv6AddressIpTypeThe ip type of this IPv6 entry.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.4 |
ipv6AddressRowStatusThe status of an entry. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.2.7.14.1.5 |
dhcpRetryCountRetry count of dhcp.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.2.7.15 |
sysIpifTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.2.8 |
ipifDuplicateIPDetectedThis is a trap that will send to snmp manager,and it will be generated when device receive a gratuitous arp packet and ip address
is the same as the one of device. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.2.8.1 |
companyTftpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.3 |
sysTftpFwTargetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.3.1 |
tftpFwTargetServerIpAddressThe TFTP server's IP address is used to upload or
download firmware.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.3.1.1 |
tftpFwTargetServerIpTypeType of IP interface.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.1.2 |
tftpFwTargetInterfaceNameSpecifies the interface name when the tftpFwTargetServerIpAddress
is linklocal address.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.3.1.3 |
tftpFwTargetImageFileNameConfigure firmware filename to download.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.3.1.4 |
tftpFwTargetTftpOperationThe tftp operates to perform downloading the firmware image
to the unit. This object is used in conjunction with
configBootTftpServerIp and configBootImageFileName.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.1.5 |
tftpFwTargetTftpOperationStatusThe tftp operation status represent firmware backup or upgrade status.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.1.6 |
tftpFwTargetTransferPercentageThe file transfer percentage of the file upload or download.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.3.1.7 |
sysTftpCfgTargetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.3.2 |
tftpCfgTargetServerIpAddressThe TFTP server's IP address is used to upload or
download configuration file.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.3.2.1 |
tftpCfgTargetServerIpTypeType of IP interface.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.2.2 |
tftpCfgTargetInterfaceNameSpecifies the interface name when the tftpCfgTargetServerIpAddress
is linklocal address.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.3.2.3 |
tftpCfgTargetImageFileNameThe configuration filename is used to store or retrieve config
from the tftp server.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.3.2.4 |
tftpCfgTargetTftpOperationThe tftp operates to perform either downloading the
configuration file to the unit or uploading the current
configuration file to the tftp server. This object is
used in conjunction with configTftpServerIpAddress
and configTftpServerFileName.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.2.5 |
tftpCfgTargetTftpOperationStatusThe tftp operation status represent configuration file backup or restore status.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.2.6 |
sysTftpSyslogTargetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.3.3 |
syslogFileSaveenable will save system log to file.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.3.1 |
tftpSyslogTargetServerIpAddressThe TFTP server's IP address is used to upload or
download system log file.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.3.3.2 |
tftpSyslogTargetServerIpTypeType of IP interface.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.3.3 |
tftpSyslogTargetInterfaceNameSpecifies the interface name when the tftpSyslogTargetServerIpAddress
is linklocal address.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.3.3.4 |
tftpSyslogTargetImageFileNameThe system log filename is used to store or retrieve system log
from the tftp server.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.3.3.5 |
tftpSyslogTargetTftpOperationThe tftp operates to perform either downloading the
system log file to the unit or uploading the current
system log file to the tftp server. This object is
used in conjunction with configTftpServerIpAddress
and configTftpServerFileName.
Note:
enable means backup system log file from dut.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.3.6 |
tftpSyslogTargetTftpOperationStatusThe tftp operation status represent system log file backup or restore status.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.3.3.7 |
tftpSyslogTargetTftpTransferPercentageThe file transfer percentage of the file upload or download.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.3.3.8 |
sysTftpTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.3.4 |
sysFimwareTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.3.4.0 |
sysFimwareupgradesuccessThis is a trap that will send to snmp manager,and it will be generated when Firware upgrade success. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.3.4.0.1 |
sysFimwareillegalfileThis is a trap that will send to snmp manager,and it will be generated when Firware upgrade with issegalfile. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.3.4.0.2 |
sysFimwarefiletransferfailedThis is a trap that will send to snmp manager,and it will be generated when transfer file failed. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.3.4.0.3 |
sysFimwarewrongchecksumThis is a trap that will send to snmp manager,and it will be generated when Firware with wrong checksum . NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.3.4.0.4 |
sysFimwareuupgradefailedThis is a trap that will send to snmp manager,and it will be generated when Firware upgrade failed. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.3.4.0.5 |
companyUserAccount OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.4 |
sysUserAccount OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.4.1 |
adminUserTableA table to management user table in the switch. SEQUENCE OF AdminUserEntry .1.3.6.1.4.1.171.10.134.2.1.4.1.1 |
adminUserEntryAn entry appears in this table for each user
in the system. AdminUserEntry .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1 |
userNameThe name of user entry.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.1 |
userPasswordThe password of user entry.
0 means no password.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.2 |
userAccessRightThe access right of user entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.3 |
userEncryptThe encrypt type of user password.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.4 |
userEncryptControlEnable or disable Encrypt of user password.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.5 |
userRowStatusThe row status of user entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.4.1.1.1.6 |
sysPasswordEncryptencrypt control of user password,
default password storage type is plaintext,
if set enable, all password storage is dlinksha1 format.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.4.2 |
companySNMP OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5 |
sysSNMPGlobalStateThis object is for enabling or disabling SNMP Community function.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.1 |
sysSNMPUser OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.2 |
snmpUserTableThe table of snmp user. SEQUENCE OF SnmpUserEntry .1.3.6.1.4.1.171.10.134.2.1.5.2.1 |
snmpUserEntryThe list of snmp user entry. SnmpUserEntry .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1 |
snmpUserNameA human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.1 |
snmpUserVersionA human readable string representing the name of
the user.
This is the (User-based Security) Model dependent
security ID.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.2 |
snmpUserGroupNameThe name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.3 |
snmpUserAuthProtocolAn indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
UserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoAuthProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoAuthProtocol, then an 'inconsistentValue'
error must be returned.
If a set operation tries to set the value to the
NoAuthProtocol while the UserPrivProtocol value
in the same row is not equal to NoPrivProtocol,
then an 'inconsistentValue' error must be returned.
That means that an SNMP command generator application
must first ensure that the UserPrivProtocol is set
to the NoPrivProtocol value before it can set
the UserAuthProtocol value to NoAuthProtocol.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.4 |
snmpUserAuthProtocolPasswordPassword of snmp user auth protocol.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.5 |
snmpUserPrivProtocolAn indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
An instance of this object is created concurrently
with the creation of any other object instance for
the same user (i.e., as part of the processing of
the set operation which creates the first object
instance in the same conceptual row).
If an initial set operation (i.e. at row creation time)
tries to set a value for an unknown or unsupported
protocol, then a 'wrongValue' error must be returned.
The value will be overwritten/set when a set operation
is performed on the corresponding instance of
usmUserCloneFrom.
Once instantiated, the value of such an instance of
this object can only be changed via a set operation to
the value of the NoPrivProtocol.
If a set operation tries to change the value of an
existing instance of this object to any value other
than NoPrivProtocol, then an 'inconsistentValue'
error must be returned.
Note that if any privacy protocol is used, then you
must also use an authentication protocol. In other
words, if usmUserPrivProtocol is set to anything else
than NoPrivProtocol, then the corresponding instance
of usmUserAuthProtocol cannot have a value of
usmNoAuthProtocol. If it does, then an
'inconsistentValue' error must be returned.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.6 |
snmpUserPrivProtocolPasswordPassword of snmp user priv protocol.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.7 |
snmpUserStatusThe status of this conceptual row.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
In particular, a newly created row for a user who
employs authentication, cannot be made active until the
corresponding usmUserCloneFrom and usmUserAuthKeyChange
have been set.
Further, a newly created row for a user who also
employs privacy, cannot be made active until the
usmUserPrivKeyChange has been set.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified,
except for usmUserOwnAuthKeyChange and
usmUserOwnPrivKeyChange. For these 2 objects, the
value of usmUserStatus MUST be active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.5.2.1.1.8 |
sysSNMPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.3 |
snmpGroupTableThe table of snmp group. SEQUENCE OF SnmpGroupEntry .1.3.6.1.4.1.171.10.134.2.1.5.3.1 |
snmpGroupEntryThe list of snmp group entry. SnmpGroupEntry .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1 |
snmpGroupNameThe name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.
This groupName is used as index into the
vacmAccessTable to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table vacmAccesTable.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.1 |
snmpGroupSecurityModelIn order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.2 |
snmpGroupSecurityLevelThe minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.
If multiple entries are equally indexed except for
this vacmAccessSecurityLevel index, then the entry
which has the highest value for
vacmAccessSecurityLevel is selected.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.3 |
snmpGroupReadViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.4 |
snmpGroupWriteViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.5 |
snmpGroupNotifyViewNameThe value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.
The identified MIB view is that one for which the
vacmViewTreeFamilyViewName has the same value as the
instance of this object; if the value is the empty
string or if there is no active MIB view having this
value of vacmViewTreeFamilyViewName, then no access
is granted.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.6 |
snmpGroupStatusThe status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.5.3.1.1.7 |
sysSNMPViewTree OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.4 |
snmpViewTreeTableThe table of snmp view tree. SEQUENCE OF SnmpViewTreeEntry .1.3.6.1.4.1.171.10.134.2.1.5.4.1 |
snmpViewTreeEntryThe list of snmp view tree entry. SnmpViewTreeEntry .1.3.6.1.4.1.171.10.134.2.1.5.4.1.1 |
snmpViewTreeNameThe human readable name for a family of view subtrees.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.1 |
snmpViewTreeSubtreeThe MIB subtree which when combined with the
corresponding instance of vacmViewTreeFamilyMask
defines a family of view subtrees.ro OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.2 |
snmpViewTreeMaskThe bit mask which, in combination with the
corresponding instance of vacmViewTreeFamilySubtree,
defines a family of view subtrees.
Each bit of this bit mask corresponds to a
sub-identifier of vacmViewTreeFamilySubtree, with the
most significant bit of the i-th octet of this octet
string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier, and
the least significant bit of the i-th octet of this
octet string corresponding to the (8*i)-th
sub-identifier, where i is in the range 1 through 16.
Each bit of this bit mask specifies whether or not
the corresponding sub-identifiers must match when
determining if an OBJECT IDENTIFIER is in this
family of view subtrees; a '1' indicates that an
exact match must occur; a '0' indicates 'wild card',
i.e., any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object instance
is contained in a family of view subtrees if, for
each sub-identifier of the value of
vacmViewTreeFamilySubtree, either:
the i-th bit of vacmViewTreeFamilyMask is 0, or
the i-th sub-identifier of X is equal to the i-th
sub-identifier of the value of
vacmViewTreeFamilySubtree.
If the value of this bit mask is M bits long and
there are more than M sub-identifiers in the
corresponding instance of vacmViewTreeFamilySubtree,
then the bit mask is extended with 1's to be the
required length.
Note that when the value of this object is the
zero-length string, this extension rule results in
a mask of all-1's being used (i.e., no 'wild card'),
and the family of view subtrees is the one view
subtree uniquely identified by the corresponding
instance of vacmViewTreeFamilySubtree.
Note that masks of length greater than zero length
do not need to be supported. In this case this
object is made read-only.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.3 |
snmpViewTreeTypeIndicates whether the corresponding instances of
vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.4 |
snmpViewTreeStatusThe status of this conceptual row.
The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.5.4.1.1.5 |
sysSNMPCommunity OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.5 |
snmpCommunityTableThe table of snmp community. SEQUENCE OF SnmpCommunityEntry .1.3.6.1.4.1.171.10.134.2.1.5.5.1 |
snmpCommunityEntryThe list of snmp community entry. SnmpCommunityEntry .1.3.6.1.4.1.171.10.134.2.1.5.5.1.1 |
snmpCommunityNameThe unique index value of a row in this table.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.134.2.1.5.5.1.1.1 |
snmpCommunityPolicyA human readable string representing the corresponding
value of snmpCommunityName in a Security Model
independent format.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.5.1.1.2 |
snmpCommunityStatusThe status of this conceptual row in the
snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.5.5.1.1.3 |
sysSNMPHost OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.6 |
snmpHostTableThe table of snmp host. SEQUENCE OF SnmpHostEntry .1.3.6.1.4.1.171.10.134.2.1.5.6.1 |
snmpHostEntryThe list of snmp host entry. SnmpHostEntry .1.3.6.1.4.1.171.10.134.2.1.5.6.1.1 |
snmpHostAddressThis object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.1 |
snmpHostIPTypeType of IP interface.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.2 |
snmpHostCommunityNameThe locally arbitrary.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.3 |
snmpHostVersionThe Level of Security to be used when generating
SNMP messages using this entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.4 |
snmpHostStatusThe status of this conceptual row in the
snmpHostTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.5.6.1.1.6 |
sysSNMPEngineIDAn SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent's
own snmpEngineID value.
The value can also take the value of the snmpEngineID
of a remote SNMP engine with which this user can
communicate.rw SnmpEngineID (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.171.10.134.2.1.5.7 |
sysSNMPTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.5.8 |
snmpTrapSNMPAuthenticationThis object is for enabling or disabling SNMP login fail
event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.1 |
snmpTrapColdStartThis object is for enabling or disabling devie Bootup event
trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.2 |
snmpTrapWarmStartThis object is for enabling or disabling devie bootup event
trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.3 |
snmpTrapFiberLinkUpDownThis object is for enabling or disabling fiber port link up / link down
event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.4 |
snmpTrapTwistLinkUpDownThis object is for enabling or disabling twisted pair port
link up / link down
event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.5 |
snmpTrapFirmwareUpgradeThis object is for enabling or disabling firmware upgrade
success or fail event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.6 |
snmpTrapPortSecViolationThis object is for enabling or disabling port security event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.7 |
snmpTrapLBDDetectionThis object is for enabling or disabling lbd event trap in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.8 |
snmpTrapDuplicateIPDetectedThis object is for enabling or disabling send gratuitous
trap when IP address conflicted in the network.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.5.8.9 |
companyDot1qVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.7 |
sysDot1qVlanManagementOnOffEnable/Disable management VLAN mechanism.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.7.2 |
sysDot1qVlanManagementidThe management VLAN ID, which will allow to forward packets of that VLAN to CPU.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.7.3 |
sysDot1qPVIDAutoAssignEnable/Disable IEEE 802.1Q PVID Auto assignrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.7.4 |
sysDot1qVlanAsyOnOffEnable/Disable IEEE 802.1Q Asymmetric VLANrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.7.5 |
sysDot1qVlanTableA table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset. SEQUENCE OF SysDot1qVlanEntry .1.3.6.1.4.1.171.10.134.2.1.7.6 |
dot1qVlanEntryInformation for a VLAN configured into the
device by (local or network) management. SysDot1qVlanEntry .1.3.6.1.4.1.171.10.134.2.1.7.6.1 |
dot1qVlanidVlan id used to identify the VLAN.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.7.6.1.1 |
dot1qVlanNameAn administratively assigned string, which may be used
to identify the VLAN.rw SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.7.6.1.2 |
dot1qVlanEgressPortsThe set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed.rw PortList .1.3.6.1.4.1.171.10.134.2.1.7.6.1.3 |
dot1qVlanUntaggedPortsThe set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set then it will reject the
set operation with an error. An example might be if a
manager attempts to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option.rw PortList .1.3.6.1.4.1.171.10.134.2.1.7.6.1.4 |
dot1qVlanRowStatusThe status of a row in sysDot1qVlanTable. By setting this object, new
entries can be created in sysDot1qVlanTable and existing entries can be
removed from sysDot1qVlanTable. It can be used as specified in the SNMP
v2 standard.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.7.6.1.5 |
sysDot1qVlanPortTableA table containing per port control and status
information for VLAN configuration in the device. SEQUENCE OF SysDot1qVlanPortEntry .1.3.6.1.4.1.171.10.134.2.1.7.7 |
dot1qVlanPortEntryInformation controlling VLAN configuration for a port
on the device. SysDot1qVlanPortEntry .1.3.6.1.4.1.171.10.134.2.1.7.7.1 |
dot1qVlanPortIndexPort index.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.7.7.1.1 |
dot1qVlanPortVlanIdThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.rw VlanIndex .1.3.6.1.4.1.171.10.134.2.1.7.7.1.2 |
companyStaticMac OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.9 |
sysStaticMacTableA list of the Static MACs SEQUENCE OF SysStaticMacEntry .1.3.6.1.4.1.171.10.134.2.1.9.1 |
staticMacEntryA Static MAC entry containing the mac and forwarding port. SysStaticMacEntry .1.3.6.1.4.1.171.10.134.2.1.9.1.1 |
staticMacVlanIDThe VLAN ID of the static MAC entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.9.1.1.1 |
staticMacAddrThe MAC address associated of the static MAC entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.9.1.1.2 |
staticMacPortThe forwarding port of the static MAC entry.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.9.1.1.3 |
staticMacStatusThe status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. The trunk member port can not set up static MAC.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.9.1.1.4 |
sysDynamicFdbTableA table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. This table maintains context ID
as one more index to support Multiple Instances. SEQUENCE OF SysDynamicFdbEntry .1.3.6.1.4.1.171.10.134.2.1.9.2 |
sysDynamicFdbEntryInformation about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information. SysDynamicFdbEntry .1.3.6.1.4.1.171.10.134.2.1.9.2.1 |
dynamicFdbIdThe identity of this Filtering Database.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.9.2.1.1 |
dynamicFdbMacAddrA unicast MAC address for which the device has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.9.2.1.2 |
dynamicFdbPortThe port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dynamicFdbMacAddr has
been seen.If the port is LA port, will show 'po' before port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.9.2.1.3 |
dynamicFdbStatusThe status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of dynamicFdbPort, nor an
entry in the fsDot1qStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
dynamicFdbMacAddr are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of dynamicFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
dynamicFdbMacAddr represents one of the device's
addresses. The corresponding instance of
dynamicFdbPort indicates which of the device's
ports has this address.
static(5) - the value of the corresponding instance of
dynamicFdbMacAddr is also the value of an
existing instance of fsDot1qStaticAddress.
deleteOnReset(6) - the value of the corresponding instance of
fsDot1qTpFdbAddress and the port of this entry enablement
Port security and set Lock address mode to Delete on Reset.
deleteOnTimeout(7) - the value of the corresponding instance of
fsDot1qTpFdbAddress and the port of this entry enablement
Port security and set Lock address mode to Delete on TimeOut.
permanent(8) - the value of the corresponding instance of
fsDot1qTpFdbAddress and the port of this entry enablement
Port security and set Lock address mode to Permanent.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.9.2.1.4 |
sysFdbClear OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.9.3 |
sysFdbClearIdFdb clear object identification:
If cmFdbClearAction is clear by port, then this value is a port number;
If cmFdbClearAction is clear by vlan, then this value is a port vlan id;
otherwise this value is not used.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.9.3.1 |
sysFdbClearActionFdb clear action identification:
ClearAll to clear all fdb entries;
ClearClearAllByVlanId clear all fdb entries that belong to specified vlan id;
ClearAllByPort clear all fdb entries that belong to specified portrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.9.3.2 |
companyIgsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.10 |
sysIgsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.10.1 |
igsStatusEnables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module starts
protocol operations.
When set to 'disabled', the IGS module stops performing
protocol operations.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.1.1 |
igsReportForwardRouterOnlyEnables or disables IGMP snooping in the system.
When set to 'enabled', the IGS module forwards report packets
to router port only.
When set to 'disabled', the IGS module forwards report packets
to all port.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.1.8 |
sysIgsVlan OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.10.3 |
igsVlanRouterTableThis table contains the list of ports through which
a router, in a particular VLAN is reachable. SEQUENCE OF IgsVlanRouterEntry .1.3.6.1.4.1.171.10.134.2.1.10.3.3 |
igsVlanRouterEntryContains the VLAN ID and list of ports on which
routers are present in the VLAN. IgsVlanRouterEntry .1.3.6.1.4.1.171.10.134.2.1.10.3.3.1 |
igsVlanRouterVlanIdVLAN ID of the ports through which router is reachable.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.3.1.1 |
igsVlanRouterStaticPortListList of static ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.rw PortList .1.3.6.1.4.1.171.10.134.2.1.10.3.3.1.2 |
igsVlanRouterDynamicPortListList of dynamic ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.ro PortList .1.3.6.1.4.1.171.10.134.2.1.10.3.3.1.3 |
igsVlanFilterTableThis table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system. SEQUENCE OF IgsVlanFilterEntry .1.3.6.1.4.1.171.10.134.2.1.10.3.4 |
igsVlanFilterEntryContains snooping status , version and fast leave
configuration for a specific VLAN. IgsVlanFilterEntry .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1 |
igsVlanFilterVlanIdIndex of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.1 |
igsVlanSnoopStatusThis object allows you to enable/disable IGS function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.2 |
igsVlanQuerierIndicates whether the switch is configured as a querier in the VLANro Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.3 |
igsVlanCfgQuerierThe snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.4 |
igsVlanQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.5 |
igsVlanFastLeaveEnables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.6 |
igsVlanQuerierVersionThis object allows you to set igmp version function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.7 |
igsVlanRouterPortPurgeIntervalThis is the interval (in seconds) after which a learnt
router port entry will be purged for a specific VLAN.
For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.8 |
igsVlanHostPortPurgeIntervalThis is the interval (in seconds) after which a learnt
port entry will be purged for a specific VLAN.
For each port on which report
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.9 |
igsVlanRobustnessValueWhen the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'RobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.10 |
igsVlanGrpQueryIntervalThe value of this attribute defines the time period with which
the specific VLAN will send group specific queries on a port to check
if there is any interested receivers. The switch will send
'RobustnessValue' queries before removing the port from the
group membership information in the forwarding database.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.11 |
igsVlanQueryMaxResponseTimeThe maximum query response time advertised General
queries on this interface.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.4.1.12 |
igsVlanMulticastGroupTableThis table contains MAC based multicast forwarding
information. SEQUENCE OF IgsVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.134.2.1.10.3.5 |
igsVlanMulticastGroupEntryThis table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded. IgsVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.134.2.1.10.3.5.1 |
igsVlanMulticastGroupVlanIdVLAN ID pertaining to the Multicast forwarding entryro Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.1 |
igsVlanMulticastGroupIpAddressMulticast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format.ro IpAddress .1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.2 |
igsVlanMulticastGroupMacAddressMulticast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.3 |
igsVlanMulticastGroupPortListList of ports onto which the multicast data
packets destined for this group will be forwarded.ro PortList .1.3.6.1.4.1.171.10.134.2.1.10.3.5.1.4 |
sysIgsAccessAuth OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.10.5 |
igsAccessAuthTableThis table is used to manage the IGMP Authentication
function of the switch. SEQUENCE OF IgsAccessAuthEntry .1.3.6.1.4.1.171.10.134.2.1.10.5.1 |
igsAccessAuthEntryContains management entities for IGMP Authentication
function. IgsAccessAuthEntry .1.3.6.1.4.1.171.10.134.2.1.10.5.1.1 |
igsAccessAuthPortIndexThe port index of igsAccessAuthTable which
indicates the port to be configured.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.5.1.1.1 |
igsAccessAuthStateThis object can be configured to set IGMP Authentication
state to enabled/disabled on each port.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.10.5.1.1.2 |
sysIgsHost OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.10.6 |
igsHostTableThis table is used to manage
the IGMP Host based Fast Leave function of the switch. SEQUENCE OF IgsHostEntry .1.3.6.1.4.1.171.10.134.2.1.10.6.1 |
igsHostEntryContains management entities for
IGMP Host based fast leave function. IgsHostEntry .1.3.6.1.4.1.171.10.134.2.1.10.6.1.1 |
igsHostTableVlanIdVLAN ID of Host table entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.1 |
igsHostTableGroupAddressGroup address of Host table entry.ro IpAddress .1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.2 |
igsHostTablePortPort number of Host table entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.3 |
igsHostTableHostIPAddressHost IP address of Group in Host table entry.ro IpAddress .1.3.6.1.4.1.171.10.134.2.1.10.6.1.1.4 |
companyQoSGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.12 |
sysQosModeSettings of Qos mode.
Qos PortBase, 802.1p or DSCP mode.
PortBase:
When Qos in Port Base mode, ingress packets from each port SHOULD be forwarded to the specific queue according to Port Base Priority settings for traffic per-port classification
802.1p:
When Qos is placed in 802.1P mode, ingress tagged packets SHOULD be classified to 8 different queues according to its carrying 802.1P priority and queue setting
DSCP:
When Qos in DSCP mode, ingress packets MUST be classified to the specified queue according to its DSCP and queue mappingrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.12.1 |
sysQosQueuingMechanismQueuing mechanism.
strictPriority(1) : Strict Priority
wrr(2) : Weighted Round Robin
Strict-priority scheduling is implemented with a special strict-priority scheduler
node that is stacked directly above the port. Queues stacked on top of the strict-priority
scheduler node always get bandwidth before other queues.
Weighted round-robin scheduling is designed to better handle queues with different
processing capacities. Each queue has a weight : Low is 1, Medium is 2, High is 4 and
Highest is 8. Queues with higher weights get bandwidth before than other
queues with less weights.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.12.2 |
sysQosPortBase OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.12.3 |
qosPortBaseTableA list of 802.1p port default priority Entries. SEQUENCE OF QosPortBaseEntry .1.3.6.1.4.1.171.10.134.2.1.12.3.1 |
qosPortBaseEntryA list of 802.1p port default priority priorities. QosPortBaseEntry .1.3.6.1.4.1.171.10.134.2.1.12.3.1.1 |
qosPortBasePortIndexA port identifier that is in the range of 1 to ifNumber.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.3.1.1.1 |
qosPortBasePriorityFor ingress packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization.rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.3.1.1.2 |
qosPortBaseEffectivePriorityFor ingress packets, the per port 'Effective Default
Priority' setting will be applied to packets of each port to
provide port-based traffic prioritization.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.3.1.1.3 |
sysQos1p OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.12.4 |
qosTrafficClassTableA table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge. SEQUENCE OF QosTrafficClassEntry .1.3.6.1.4.1.171.10.134.2.1.12.4.1 |
qosTrafficClassEntryUser Priority to Traffic Class mapping. QosTrafficClassEntry .1.3.6.1.4.1.171.10.134.2.1.12.4.1.1 |
qosTrafficClassPriorityThe Priority value determined for the received frame.
This value is equivalent to the priority indicated in
the tagged frame received, or one of the evaluated
priorities, determined according to the media-type.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.4.1.1.1 |
qosTrafficClassThe Traffic Class the received frame is mapped to.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.4.1.1.2 |
sysQosScheduling OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.12.5 |
qosSchedulingClassTableA list of sysQosScheduling. SEQUENCE OF QosSchedulingClassEntry .1.3.6.1.4.1.171.10.134.2.1.12.5.1 |
qosSchedulingClassEntryA list of sysQosScheduling Weight. QosSchedulingClassEntry .1.3.6.1.4.1.171.10.134.2.1.12.5.1.1 |
qosSchedulingClassIndexA index of class 0 ~ 7.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.5.1.1.1 |
qosSchedulingWeightcos weightro INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.5.1.1.2 |
sysQosDiffServ OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.12.6 |
qosDiffServTypeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.12.6.1 |
qosDiffServType00DiffServ Type 0 : IP ToS value = 0rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.1 |
qosDiffServType01DiffServ Type 01 : IP ToS value = 4rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.2 |
qosDiffServType02DiffServ Type 02 : IP ToS value = 8rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.3 |
qosDiffServType03DiffServ Type 03 : IP ToS value = 12rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.4 |
qosDiffServType04DiffServ Type 04 : IP ToS value = 16rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.5 |
qosDiffServType05DiffServ Type 05 : IP ToS value = 20rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.6 |
qosDiffServType06DiffServ Type 06 : IP ToS value = 24rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.7 |
qosDiffServType07DiffServ Type 07 : IP ToS value = 28rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.8 |
qosDiffServType08DiffServ Type 08 : IP ToS value = 32rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.9 |
qosDiffServType09DiffServ Type 09 : IP ToS value = 36rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.10 |
qosDiffServType10DiffServ Type 10 : IP ToS value = 40rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.11 |
qosDiffServType11DiffServ Type 11 : IP ToS value = 44rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.12 |
qosDiffServType12DiffServ Type 12 : IP ToS value = 48rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.13 |
qosDiffServType13DiffServ Type 13 : IP ToS value = 52rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.14 |
qosDiffServType14DiffServ Type 14 : IP ToS value = 56rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.15 |
qosDiffServType15DiffServ Type 15 : IP ToS value = 60rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.16 |
qosDiffServType16DiffServ Type 16 : IP ToS value = 64rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.17 |
qosDiffServType17DiffServ Type 17 : IP ToS value = 68rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.18 |
qosDiffServType18DiffServ Type 18 : IP ToS value = 72rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.19 |
qosDiffServType19DiffServ Type 19 : IP ToS value = 76rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.20 |
qosDiffServType20DiffServ Type 20 : IP ToS value = 80rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.21 |
qosDiffServType21DiffServ Type 21 : IP ToS value = 84rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.22 |
qosDiffServType22DiffServ Type 22 : IP ToS value = 88rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.23 |
qosDiffServType23DiffServ Type 23 : IP ToS value = 92rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.24 |
qosDiffServType24DiffServ Type 24 : IP ToS value = 96rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.25 |
qosDiffServType25DiffServ Type 25 : IP ToS value = 100rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.26 |
qosDiffServType26DiffServ Type 26 : IP ToS value = 104rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.27 |
qosDiffServType27DiffServ Type 27 : IP ToS value = 108rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.28 |
qosDiffServType28DiffServ Type 28 : IP ToS value = 112rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.29 |
qosDiffServType29DiffServ Type 29 : IP ToS value = 116rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.30 |
qosDiffServType30DiffServ Type 30 : IP ToS value = 120rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.31 |
qosDiffServType31DiffServ Type 31 : IP ToS value = 124rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.32 |
qosDiffServType32DiffServ Type 32 : IP ToS value = 128rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.33 |
qosDiffServType33DiffServ Type 33 : IP ToS value = 132rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.34 |
qosDiffServType34DiffServ Type 34 : IP ToS value = 136rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.35 |
qosDiffServType35DiffServ Type 35 : IP ToS value = 140rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.36 |
qosDiffServType36DiffServ Type 36 : IP ToS value = 144rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.37 |
qosDiffServType37DiffServ Type 37 : IP ToS value = 148rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.38 |
qosDiffServType38DiffServ Type 38 : IP ToS value = 152rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.39 |
qosDiffServType39DiffServ Type 39 : IP ToS value = 156rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.40 |
qosDiffServType40DiffServ Type 40 : IP ToS value = 160rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.41 |
qosDiffServType41DiffServ Type 41 : IP ToS value = 164rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.42 |
qosDiffServType42DiffServ Type 42 : IP ToS value = 168rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.43 |
qosDiffServType43DiffServ Type 43 : IP ToS value = 172rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.44 |
qosDiffServType44DiffServ Type 44 : IP ToS value = 176rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.45 |
qosDiffServType45DiffServ Type 45 : IP ToS value = 180rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.46 |
qosDiffServType46DiffServ Type 46 : IP ToS value = 184rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.47 |
qosDiffServType47DiffServ Type 47 : IP ToS value = 188rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.48 |
qosDiffServType48DiffServ Type 48 : IP ToS value = 192rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.49 |
qosDiffServType49DiffServ Type 49 : IP ToS value = 196rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.50 |
qosDiffServType50DiffServ Type 50 : IP ToS value = 200rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.51 |
qosDiffServType51DiffServ Type 51 : IP ToS value = 204rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.52 |
qosDiffServType52DiffServ Type 52 : IP ToS value = 208rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.53 |
qosDiffServType53DiffServ Type 53 : IP ToS value = 212rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.54 |
qosDiffServType54DiffServ Type 54 : IP ToS value = 216rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.55 |
qosDiffServType55DiffServ Type 55 : IP ToS value = 220rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.56 |
qosDiffServType56DiffServ Type 56 : IP ToS value = 224rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.57 |
qosDiffServType57DiffServ Type 57 : IP ToS value = 228rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.58 |
qosDiffServType58DiffServ Type 58 : IP ToS value = 232rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.59 |
qosDiffServType59DiffServ Type 59 : IP ToS value = 236rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.60 |
qosDiffServType60DiffServ Type 60 : IP ToS value = 240rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.61 |
qosDiffServType61DiffServ Type 61 : IP ToS value = 244rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.62 |
qosDiffServType62DiffServ Type 62 : IP ToS value = 248rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.63 |
qosDiffServType63DiffServ Type 63 : IP ToS value = 252rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.12.6.1.64 |
companyTrafficMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.13 |
sysBandwidthCtrlSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.13.1 |
bandwidthCtrlTableA table to control the rate limiting parameters
either for the entire switch or for each interface in the switch. SEQUENCE OF BandwidthCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.13.1.2 |
bandwidthCtrlEntryAn entry appears in this table for each physical
interface in the switch. BandwidthCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.13.1.2.1 |
bandwidthCtrlIndexThe interface index for which the configuration in this
entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.1 |
bandwidthCtrlTxThresholdConfigures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. The value can
be set between 64~100000(Kbits per second) in FE port, 64~1000000
(Kbits per second) in GE port.rw Integer32 (0 | 64..1000000) .1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.2 |
bandwidthCtrlEffectiveTxThresholdConfigures the new interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed. The value can
be set between 64~100000(Kbits per second) in FE port, 64~1000000
(Kbits per second) in GE port.ro Integer32 (0 | 64..1000000) .1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.3 |
bandwidthCtrlRxThresholdAllows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets on this interface. The value that
can be set for this object is limited by the underlying hardware.
The value can be set between 64~100000(Kbits per second) in FE
port, 64~1000000(Kbits per second) in GE port.rw Integer32 (0 | 64..1000000) .1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.4 |
bandwidthCtrlEffectiveRxThresholdAllows to configure the new limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets on this interface. The value that
can be set for this object is limited by the underlying hardware.
The value can be set between 64~100000(Kbits per second) in FE
port, 64~1000000(Kbits per second) in GE port.ro Integer32 (0 | 64..1000000) .1.3.6.1.4.1.171.10.134.2.1.13.1.2.1.5 |
sysTrafficCtrlSettings OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.13.4 |
trafficCtrlTrapThe trap setting of traffic control.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.13.4.1 |
trafficCtrlTableThe traffic control table. SEQUENCE OF TrafficCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.13.4.2 |
trafficCtrlEntryThe traffic control entry. TrafficCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1 |
trafficCtrlIndexThe traffic control index.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.1 |
trafficCtrlActionModeThe action mode of traffic control.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.2 |
trafficCtrlTypeThe control type of traffic control.
(b: Broadcast, m: Multicast, u: Unknown Unicast)rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.3 |
trafficCtrlThresholdThe threshold of traffic control.
In drop mode,threshold should be times of 64,its range is 64 to 1000000,unit is kbps
In Shutdown mode,threshold's range is 1 to 255000,unit is pkts per secondrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.4 |
trafficCtrlCountDownThe count down value of traffic control.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.5 |
trafficCtrlTimeIntervalThe time interval of traffic control.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.6 |
trafficCtrlPortStateThe Traffic control port status in shutdown mode.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.13.4.2.1.7 |
sysStormCtrlTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.13.5 |
stormCtrlTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.13.5.0 |
stormOccurredwhen storm event occur on the port ,it will send out storm occured snmp trap to snmp manager. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.13.5.0.1 |
stormClearedwhen storm event cleared on the port, it will send out a storm cleared snmp trap to snmp manager. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.13.5.0.2 |
companySecurity OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14 |
sysPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.2 |
portSecurityTableA table to control port security features of the device. SEQUENCE OF PortSecurityEntry .1.3.6.1.4.1.171.10.134.2.1.14.2.1 |
portSecurityEntryAn entry appears in port security table for each interface
in the system. PortSecurityEntry .1.3.6.1.4.1.171.10.134.2.1.14.2.1.1 |
portSecurityIndexThe interface index for which the configuration in this
entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.1 |
portSecurityStateEnable / disable port security admin state for the interface.
A given ports' dynamic MAC address learning will be stopped such
that the current source MAC addresses entered into the MAC address
forwarding table can not be changed once the port security admin
state is enabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.2 |
portSecurityMLAConfigures interface port security maximum learning address
numbers.
When given ports' admin state is enabled, allows forwarding
table learning address number. The number can be set 0 to 64.
Note: Set value 0 means cannot learn MAC address.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.3 |
portSecurityLockAddrModeConfigures port security lock address mode for the interface.
deleteOnReset : The locked addresses will not age out until the Switch has been reset.
deleteOnTimeout : The locked addresses will age out after the aging timer expires.
Permanent : The locked addresses will not age out after the aging timer expires.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.2.1.1.4 |
portSecFDBPermanentTableA table to control port security FDB Permanent of the device. SEQUENCE OF PortSecFDBPermanentEntry .1.3.6.1.4.1.171.10.134.2.1.14.2.2 |
portSecFDBPermanentEntryAn entry appears in port security table for each interface
in the system. PortSecFDBPermanentEntry .1.3.6.1.4.1.171.10.134.2.1.14.2.2.1 |
portSecFDBPermVlanIDThe VLAN ID of the port security MAC entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.1 |
portSecFDBPermMacThe MAC address associated of the port security MAC entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.2 |
portSecFDBPermPortThe forwarding port of the port security MAC entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.3 |
portSecFDBPermTypeThis object indicates the status of this entry.
The default value is permanent(3).
other(1) - this entry is currently in use but
the conditions under which it will
remain so are different from each of the
following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset
of the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently
in use and will remain so until it is
aged out.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.4 |
portSecFDBPermEntryStateThis object indicates the status of Port Security entry
when the value of this boject is setted to false ,this
specific enntry will be delete form dynamic FDB and
Port Security Entryrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.2.2.1.5 |
sysTrafficSegmentation OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.9 |
trafficSegmentationTableA Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel SEQUENCE OF TrafficSegmentationEntry .1.3.6.1.4.1.171.10.134.2.1.14.9.1 |
trafficSegmentationEntryThere is one entry in this table for each created
port-channel port TrafficSegmentationEntry .1.3.6.1.4.1.171.10.134.2.1.14.9.1.1 |
trafficSegmentationIfIndexThe ifIndex of the port-channel(Aggregator's
interface index).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.14.9.1.1.1 |
trafficSegmentationMemberListPort list of port channel.rw PortList .1.3.6.1.4.1.171.10.134.2.1.14.9.1.1.2 |
sysSecurityAAC OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.11 |
aacAuthenAdminStateThis object indicates the Access Authentication is enable or
disable.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.11.1 |
aacAuthParamResponseTimeoutTimeout in second for login authentication response.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.11.2 |
aacAuthParamAttemptThe amount for login authentication, if login failure exceed,
connection or access would be locked.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.11.3 |
aacLocalEnablePasswordThis object is used to set Local Enable Password.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.4 |
aacAPAuthMethodGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.11.5 |
aacAPLoginMethod OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.11.5.1 |
aacAPTelnetLoginMethodSpecify the way which has to execute authentication while login the
system and the method for authentication.Access system via telnet.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.5.1.2 |
aacAPHttpLoginMethodSpecify the way which has to execute authentication while login the
system and the method for authentication.Access system via HTTP.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.5.1.4 |
aacAPEnableMethod OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.11.5.2 |
aacAPTelnetEnableMethodSpecify the way which has to execute authentication while login the
system and the method for authentication.Access system via telnet.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.5.2.2 |
aacAPHttpEnableMethodSpecify the way which has to execute authentication while login the
system and the method for authentication.Access system via HTTP.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.5.2.4 |
aacLoginMethodListTableA table that contains information about Login authentication method
lists. SEQUENCE OF AacLoginMethodListEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.6 |
aacLoginMethodListEntryA list of the Authentication methods. AacLoginMethodListEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1 |
aacLoginMethodListNameA human-readable text string of the method list.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.1 |
aacLoginMethod1The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.2 |
aacLoginMethod2The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.3 |
aacLoginMethod3The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.4 |
aacLoginMethod4The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.5 |
aacLoginMethodListRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.6.1.6 |
aacEnableMethodListTableA table that contains information about Enable authentication method
lists. SEQUENCE OF AacEnableMethodListEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.7 |
aacEnableMethodListEntryA list of the Authentication methods. AacEnableMethodListEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1 |
aacEnableMethodListNameA human-readable text string of the method list.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.1 |
aacEnableMethod1The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.2 |
aacEnableMethod2The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.3 |
aacEnableMethod3The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.4 |
aacEnableMethod4The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.5 |
aacEnableMethodListRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.7.1.6 |
aacServerGroupTableA table that contains informations about server group. SEQUENCE OF AacServerGroupEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.8 |
aacServerGroupEntryA list of the group including servers. AacServerGroupEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.8.1 |
aacServerGroupNameA human-readable text string of the method group.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.8.1.1 |
aacServersInGroupThe list of servers in the group, each bit indicates a specified server ID.
The server must be created before including it.rw Bits .1.3.6.1.4.1.171.10.134.2.1.14.11.8.1.2 |
aacServerGroupRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.8.1.3 |
aacServerInfoTableA table that contains information about radius severs. SEQUENCE OF AacServerInfoEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.9 |
aacServerInfoEntryA list of the information of server . AacServerInfoEntry .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1 |
aacServerIPTypeThe IP address of the radius AAC server IP type
referred to in this table entry. (IPv4=1, IPv6=2)ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.1 |
aacServerIPAddrThe IP address of radius Serverro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.2 |
aacServerIndexA value that uniquely identifies this SwAACServerGroupEntry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.3 |
aacServerInterfaceNameSpecifies the interface name when the aacServerIPAddr is linklocal address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.4 |
aacServerAuthPortThe TCP/IP port .rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.5 |
aacServerAuthKeyThe key used while authentication process.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.6 |
aacServerTimeoutradius Server response timeout .rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.7 |
aacServerRetryCountClient retry count .
(-1: No retry mechanism)rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.8 |
aacServerRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
be deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.11.9.1.9 |
sysPortSecurityTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.12 |
portSecurityTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.12.0 |
portSecurityViolationSystem SHOULD send out a trap message in violation that
the learning entries exceeds the max learning address set of port security. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.14.12.0.1 |
sysTrustedHost OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.14.13 |
trustedHostStatusThis object indicates trusted host function is enabled or disabled.
When trusted host function is enabled, Smart Switches will
only allow hosts which you trust to access and control the switch.
Your local host IP Addresses must be one of the IP Addresses to
avoid disconnection.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.14.13.1 |
trustedHostTableA table to configure IP authorized managers in the system. SEQUENCE OF TrustedHostEntry .1.3.6.1.4.1.171.10.134.2.1.14.13.2 |
trustedHostEntryEach entry in this table represents rules for particular
IP authorized manager. TrustedHostEntry .1.3.6.1.4.1.171.10.134.2.1.14.13.2.1 |
trustedHostIpAddrSpecifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.14.13.2.1.1 |
trustedHostIpMaskUsed to mask with IP address, it allow you set a subnet as a
trusted host entry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.14.13.2.1.2 |
trustedHostRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.14.13.2.1.3 |
companyArp OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.15 |
sysArp OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.15.1 |
arpTableA table that contains ARP infomation SEQUENCE OF ARPEntry .1.3.6.1.4.1.171.10.134.2.1.15.1.1 |
arpEntryAn entry appears in this table for each interface
in the system. ARPEntry .1.3.6.1.4.1.171.10.134.2.1.15.1.1.1 |
arpIpAddrThe IpAddress corresponding to the Mac Address.ro IpAddress .1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.1 |
arpMacAddressEthernet Mac Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.2 |
arpTypeThe type of ARP mapping entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.3 |
arpRowStatusThe status of an entry in the ARP Table.
A conceptual row can not be made active until the
arpMacAddress object has been set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.15.1.1.1.4 |
cmArpClearclear action type:
none(0),
clearAll(1),
cleatAllStatic,
clearAllDynamic,
Initial its value is 0, and after each action, it will reset to 0rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.15.2 |
companySyslog OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.16 |
syslogSettingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.16.1 |
syslogEnableThis object is for enabling or disabling syslog alert features in
the system and the syslog will save to flash or send to remote
syslog server.
System Logs record and manage events, as well as report errors and
informational messages.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.1.1 |
syslogSaveModeThis object is for choosing the method to save syslog into flash.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.1.2 |
syslogSaveMinutesWhen savemode is time interval, it's used to set the interval minutes of
system save syslog to flash.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.16.1.3 |
syslogClearLogClears the buffered logs.
This object is set to 'false' by default.
When set to 'True', the buffered logs will be cleared and the value
of this object will become 'false' again.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.16.1.4 |
syslogServerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.16.3 |
syslogServTableThe table of syslog remote server. SEQUENCE OF SyslogServEntry .1.3.6.1.4.1.171.10.134.2.1.16.3.1 |
syslogServEntryThe list of syslog remote server entry. SyslogServEntry .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1 |
syslogServIndexThe index of syslog remote server.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.1 |
syslogServAddrTypeSpecifies the Address type of server.Address type shall be ipv4 or ipv6.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.2 |
syslogServAddrSpecifies the ServerIP to which the syslog shall be forwarded.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.3 |
syslogServSeveritySpecifies the log level option to be set for a specific server.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.5 |
syslogServFacilityThe Syslog standard facilities.
The facility to be used when sending Syslog messages to this server.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.6 |
syslogServUDPportThe value is for setting UDP Port.rw Integer32 (514 | 6000..65535) .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.7 |
syslogServSrvStatusThe status for this server. If enable, system will send message to
this server.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.8 |
syslogServSrvRowStatusRow status of this server entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.16.3.1.1.9 |
syslogMsg OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.16.4 |
syslogMsgTableSpecifies the number of messages . SEQUENCE OF SyslogMsgEntry .1.3.6.1.4.1.171.10.134.2.1.16.4.1 |
syslogMsgEntryAn entry (conceptual row) in the syslogMsgTable. SyslogMsgEntry .1.3.6.1.4.1.171.10.134.2.1.16.4.1.1 |
syslogMsgIndexThe auxiliary variable used for identifying instances
of the columnar objects in the syslogMsgTable.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.1 |
syslogMsgDescrA textual description of system log message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.2 |
syslogMsgTimetime of system log message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.3 |
syslogMsgSeveritySeverity of system log message.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.16.4.1.1.4 |
companyLBD OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.17 |
sysLBDStateEnableEnable/Disable Loopback detection function.
The Loopback Detection function is used to detect the loop created
by a specific port while Spanning Tree Protocol (STP) is not
enabled in the network, especially when the down links are hubs
or unmanaged switchs.The Switch will automatically shutdown the
port and sends a log to the administrator.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.17.1 |
sysLBDModeLoopback detection function mode.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.17.2 |
sysLBDIntervalSet a Loop detection Interval between 1 and 32767 seconds.
The default is 2 seconds.
This time interval to be used at counting time seconds to
resend the CTP packet automatically.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.17.3 |
sysLBDRecoverTimeThis time interval to be used at counting time seconds to
recover the disabled port automatically.
The Loop Detection Recover Time can be set at 0 seconds,
or 60 to 1000000 seconds.
Entering 0 will disable the Loop Detection Recover Time.
The default is 60 seconds.rw Integer32 (0 | 60..1000000) .1.3.6.1.4.1.171.10.134.2.1.17.4 |
sysLBDCtrlTableA table to control Loopback detection features either for
the entire switch or for each interface in the switch. SEQUENCE OF SysLBDCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.17.5 |
sysLBDCtrlEntryAn entry appears in this table for each interface
in the system. SysLBDCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.17.5.1 |
sysLBDCtrlIndexThe interface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.17.5.1.1 |
sysLBDPortStatusProvides control to per port enable or disable the loopback detection
function. Default is disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.17.5.1.2 |
sysLBDPortLoopStatusThe loop status for this port.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.17.5.1.3 |
sysLBDVlanLoopTableA table to display Loopback detection features by vlan
mode . SEQUENCE OF SysLBDVlanLoopEntry .1.3.6.1.4.1.171.10.134.2.1.17.6 |
sysLBDVlanLoopEntryAn entry appears in this table for each interface
in the system. SysLBDVlanLoopEntry .1.3.6.1.4.1.171.10.134.2.1.17.6.1 |
sysLBDVlanLoopIndexDisplay port lists loop status by vlan.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.17.6.1.1 |
sysLBDVlanLoopPortsDisplay port lists loop status by vlan.ro PortList .1.3.6.1.4.1.171.10.134.2.1.17.6.1.2 |
sysLBDEnabledVlanListThis object indicates the VLANs that enabled LBD.
Note:
For the LBD enabled VLAN specification,
the value should be separated by ',' or '-'.
Such as: 1,4,7 or 1,4,7-9 .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.17.7 |
sysLBDTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.17.8 |
lbdTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.17.8.0 |
loopbackOccurA loopbackOccur notification is sent when loop found. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.17.8.0.1 |
loopbackRecoveryA loopbackRecovery notification is sent when recovery time comes to end. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.17.8.0.2 |
companyMirror OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.18 |
sysMirrorStatusEnable/Disable Port Mirroring function.
Default is disabled.
Port Mirroring is a method of monitoring network traffic that
forwards a copy of each incoming and/or outgoing packet from one
port of the Switch to another port where the packet can be studied.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.18.1 |
sysMirrorPortTableProvides control to enable or disable mirroring of ingress or Egress
traffic over this interface to the mirrored-to port. SEQUENCE OF PortMirrorEntry .1.3.6.1.4.1.171.10.134.2.1.18.2 |
mirrorPortEntryProvides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port. PortMirrorEntry .1.3.6.1.4.1.171.10.134.2.1.18.2.1 |
mirrorTargetIfIndexSpecifies the port to which the mirrored traffic in the system
is to be copied.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.18.2.1.1 |
mirrorTargetPortSpecifies the port to which the mirrored traffic in the system
is to be copied.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.18.2.1.2 |
mirrorIngressPortListProvides control to enable or disable mirroring of ingress
traffic over this interface to the mirrored-to port.rw PortList .1.3.6.1.4.1.171.10.134.2.1.18.2.1.3 |
mirrorEgressPortListProvides control to enable or disable mirroring of egress
traffic over this interface to the mirrored-to port.rw PortList .1.3.6.1.4.1.171.10.134.2.1.18.2.1.4 |
mirrorCtrlRowStatusSpecifies the validity of the entry, max entry number is 4.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.18.2.1.5 |
companyStaticMcast OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.19 |
sysStaticMcastTableA list of the Static MACs SEQUENCE OF StaticMcastEntry .1.3.6.1.4.1.171.10.134.2.1.19.1 |
staticMcastEntryA Static MAC entry containing the mac and forwarding port. StaticMcastEntry .1.3.6.1.4.1.171.10.134.2.1.19.1.1 |
staticMcastVlanIDThe VLAN ID of the static MAC entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.19.1.1.1 |
staticMcastMacThe MAC address associated of the static MAC entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.19.1.1.2 |
staticMcastEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.ro PortList .1.3.6.1.4.1.171.10.134.2.1.19.1.1.3 |
staticMcastStatusThe status of an entry in the Static Mcast Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.19.1.1.4 |
companySNTPSetting OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.20 |
sysSNTPSettingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.20.17 |
sntpTimeSecondsThis object is for setting the system time in seconds
from Epoch (00:00:00 UTC, January 1, 2009). Notice :
input value must larger than 284083276 (00:00:00 UTC,
January 1, 2009) and smaller than 1136073599 (23:59:59
UTC, December 31, 2035).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.20.17.1 |
sntpPollIntervalSNTP Poll Interval In Seconds (30-99999)rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.20.17.8 |
sntpGlobalStateEnable/Disable SNTP function in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.20.17.9 |
sntpDSTOffsetThis object is for Daylight Saving Time Offset
In (30/60/90/120) Minutes.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.20.17.10 |
sntpGMTMinutesSpecifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.20.17.11 |
sntpDSTStartTimeDaylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countries observe DST,
although most have their own rules and regulations for when it begins
and ends. The dates of DST may change from year to year. The Valid
format [dayofmonth-month,HH:MM].
Example:- 01-Apr,17:30rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.20.17.12 |
sntpDSTEndTimeDaylight saving time (DST) is a system of setting clocks ahead so
that both sunrise and sunset occur at a later hour. The effect is
additional daylight in the evening. Many countries observe DST,
although most have their own rules and regulations for when it begins
and ends. The dates of DST may change from year to year. The Valid
format [dayofmonth-month,HH:MM].
Example:- 01-Apr,17:30rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.20.17.13 |
sntpDSTStateThis object is for Annual(1) or Disabled(2) DST state in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.20.17.20 |
sysSNTPServerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.20.18 |
sntpServerTableThe table contains configured SNTP/NTP servers in the system. SEQUENCE OF SntpServerEntry .1.3.6.1.4.1.171.10.134.2.1.20.18.1 |
sntpServerEntryEach entry in the table contains necessary information to
send SNTP request to the servers. SntpServerEntry .1.3.6.1.4.1.171.10.134.2.1.20.18.1.1 |
sntpServerAddrTypeThe IP address type ipv4 or ipv6.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.1 |
sntpServerAddrThe unicast IPv4/IPv6 server address in the Unicast Addressing modero InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.2 |
sntpServerTypeIn Unicast addressing mode, we can have primary and secondary servers.
This flag is to distinguish between primary and secondary server.
SNTP client sends request to different servers until it receives
successful response. This flag tells the order in which to query the
servers.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.4 |
sntpServerRowStatusThe activation of a row adds server entry. The destruction of a row
removes server entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.20.18.1.1.5 |
companyRMON OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22 |
sysRMONGlobalStateThis object is for enabling or disabling RMON function.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.22.1 |
sysRMONStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.2 |
rmonStatsTableA list of Ethernet statistics entries. SEQUENCE OF RmonStatsEntry .1.3.6.1.4.1.171.10.134.2.1.22.2.1 |
rmonStatsEntryA collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1 RmonStatsEntry .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1 |
rmonStatsIndexThe value of this object uniquely identifies this entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.1 |
rmonStatsDataSourceThis object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shall identify the instance of the ifIndex object,
defined in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
etherStatsStatus object is equal to valid(1).rw OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.2 |
rmonStatsOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw OwnerString .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.3 |
rmonStatsStatusThe status of this etherStats entry.rw RmonStatus .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.4 |
rmonStatsDropEventsThe total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has been detected.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.5 |
rmonStatsOctetsThe total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
This object can be used as a reasonable estimate of
10-Megabit ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets objects
should be sampled before and after a common interval. The
differences in the sampled values are Pkts and Octets,
respectively, and the number of seconds in the interval is
Interval. These values are used to calculate the Utilization
as follows:
Pkts * (9.6 + 6.4) + (Octets * .8)
Utilization = -
Interval * 10,000
The result of this equation is the value Utilization which
is the percent utilization of the ethernet segment on a
scale of 0 to 100 percent.ro Counter32 UNITS "Octets" .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.6 |
rmonStatsPktsThe total number of packets (including bad packets,
broadcast packets, and multicast packets) received.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.7 |
rmonStatsBroadcastPktsThe total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.8 |
rmonStatsMulticastPktsThe total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.22.2.1.1.9 |
sysRMONHistory OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.3 |
rmonHistoryTableA list of history control entries. SEQUENCE OF RmonHistoryEntry .1.3.6.1.4.1.171.10.134.2.1.22.3.1 |
rmonHistoryEntryA list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2 RmonHistoryEntry .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1 |
rmonHistoryIndexAn index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.1 |
rmonHistoryDataSourceThis object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In order to identify
a particular interface, this object shall identify
the instance of the ifIndex object, defined
in RFC 2233 [17], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets
on the local network segment attached to the identified
interface.
An agent may or may not be able to tell if fundamental
changes to the media of the interface have occurred and
necessitate an invalidation of this entry. For example, a
hot-pluggable ethernet card could be pulled out and replaced
by a token-ring card. In such a case, if the agent has such
knowledge of the change, it is recommended that it
invalidate this entry.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1).rw OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.2 |
rmonHistoryBucketsRequestedThe requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.
When this object is created or modified, the probe
should set historyControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.3 |
rmonHistoryIntervalThe interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager will
take into account the possibility of overflow in any of
the associated counters. It is important to consider the
minimum time in which any counter could overflow on a
particular media type and set the historyControlInterval
object to a value less than this interval. This is
typically most important for the 'octets' counter in any
media-specific table. For example, on an Ethernet
network, the etherHistoryOctets counter could overflow
in about one hour at the Ethernet's maximum
utilization.
This object may not be modified if the associated
historyControlStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.4 |
rmonHistoryOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw OwnerString .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.5 |
rmonHistoryStatusThe status of this historyControl entry.
Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1).rw RmonStatus .1.3.6.1.4.1.171.10.134.2.1.22.3.1.1.6 |
sysRMONAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.4 |
rmonAlarmTableA list of alarm entries. SEQUENCE OF RmonAlarmEntry .1.3.6.1.4.1.171.10.134.2.1.22.4.1 |
rmonAlarmEntryA list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8 RmonAlarmEntry .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1 |
rmonAlarmIndexAn index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.1 |
rmonAlarmIntervalThe interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 UNITS "Seconds" .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.2 |
rmonAlarmVariableThe object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
Because SNMP access control is articulated entirely
in terms of the contents of MIB views, no access
control mechanism exists that can restrict the value of
this object to identify only those objects that exist
in a particular MIB view. Because there is thus no
acceptable means of restricting the read access that
could be obtained through the alarm mechanism, the
probe must only grant write access to this object in
those views that have read access to all objects on
the probe.
During a set operation, if the supplied variable name is
not available in the selected MIB view, a badValue error
must be returned. If at any time the variable name of
an established alarmEntry is no longer available in the
selected MIB view, the probe must change the status of
this alarmEntry to invalid(4).
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.3 |
rmonAlarmSampleTypeThe method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.4 |
rmonAlarmRisingThresholdA threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is greater than or
equal to this threshold and the associated
alarmStartupAlarm is equal to risingAlarm(1) or
risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
alarmFallingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.5 |
rmonAlarmFallingThresholdA threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is less than or
equal to this threshold and the associated
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
alarmRisingThreshold.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.6 |
rmonAlarmRisingEventIndexThe index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.7 |
rmonAlarmFallingEventIndexThe index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there is no
corresponding entry in the eventTable, then
no association exists. In particular, if this value
is zero, no associated event will be generated, as
zero is not a valid event index.
This object may not be modified if the associated
alarmStatus object is equal to valid(1).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.8 |
rmonAlarmOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw OwnerString .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.9 |
rmonAlarmStatusThe status of this alarm entry.rw RmonStatus .1.3.6.1.4.1.171.10.134.2.1.22.4.1.1.10 |
sysRMONEvent OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.22.5 |
rmonEventTableA list of events to be generated. SEQUENCE OF RmonEventEntry .1.3.6.1.4.1.171.10.134.2.1.22.5.1 |
rmonEventEntryA set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6 RmonEventEntry .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1 |
rmonEventIndexAn index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.1 |
rmonEventDescriptionA comment describing this event entry.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.2 |
rmonEventTypeThe type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management stations.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.3 |
rmonEventCommunityIf an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string.rw OwnerString .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.4 |
rmonEventOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.
If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connected
management stations should retrieve those log entries,
as they may have significance to all management stations
connected to this devicerw OwnerString .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.5 |
rmonEventStatusThe status of this event entry.
If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent.rw RmonStatus .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.6 |
rmonEventLastTimeSentThe value of sysUpTime at the time this event
entry last generated an event. If this entry has
not generated any events, this value will be
zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.10.134.2.1.22.5.1.1.7 |
companyPnacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.23 |
sysPnacCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.23.1 |
pnacStatusEnable/Disable Static 802.1x.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.1.1 |
pnacModeThis object indicates the authentication mode of the device.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.1.2 |
pnacProtocolThe authentication method used to authenticate users.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.1.3 |
pnacRadiusAccountingStateEnable/disable Radius Accounting Settings.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.1.4 |
sysPnacPortAccessCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.23.2 |
pnacPortAccessControlTableA table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF PnacPortAccessControlEntry .1.3.6.1.4.1.171.10.134.2.1.23.2.1 |
pnacPortAccessControlEntryThe configuration information for an Authenticator Port. PnacPortAccessControlEntry .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1 |
pnacConfigPortNumberA unique value for each port that correlates to port index.
Its value ranges between 1 and the value of port number.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.1 |
pnacQuietPeriodThe value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.2 |
pnacTxPeriodThe value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.3 |
pnacSuppTimeoutThe value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.4 |
pnacServerTimeoutThe value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.5 |
pnacMaxReqThe value of the maxReq constant currently in use by
the Backend Authentication state machine.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.6 |
pnacReAuthPeriodThe value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.7 |
pnacReAuthenticationThe enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1).rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.8 |
pnacConfigPortControlThe current value of the controlled Port
control parameter for the Port.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.9 |
pnacCapabilityThe current value of the controlled Port
control parameter for the Port.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.10 |
pnacDirectionThe current value of the controlled Port
control parameter for the Port.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.11 |
pnacOperControlledDirectionsThe current value of the open control Port
control parameter for the Port.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.12 |
pnacPortAuthStatusThe authorized status of the open control Port.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.2.1.1.13 |
sysPnacUser OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.23.3 |
pnacUserTableA table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF PnacUserEntry .1.3.6.1.4.1.171.10.134.2.1.23.3.1 |
pnacUserEntryThe configuration information for an Pnacenticator Port. PnacUserEntry .1.3.6.1.4.1.171.10.134.2.1.23.3.1.1 |
pnacUserNameThe unique index value of a row in this table.
This object is used to set 802.1X Local user name,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.23.3.1.1.1 |
pnacUserPasswordThis object is used to set 802.1X Local user Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.23.3.1.1.2 |
pnacUserStatusThe status of this conceptual row in the pnacUserTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The pnacUserName objects must be
explicitly set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.23.3.1.1.3 |
sysPnacRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.23.4 |
pnacRadiusServerTableA table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF PnacRadiusServerEntry .1.3.6.1.4.1.171.10.134.2.1.23.4.1 |
pnacRadiusServerEntryThe configuration information for an Authenticator Port. PnacRadiusServerEntry .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1 |
pnacRadiusServerIndexA unique value for Authentication RADIUS Server index.
Its value ranges between 1 and 3.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.1 |
pnacRadiusIPTypeThe IP address of the RADIUS server IP type
referred to in this table entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.2 |
pnacRadiusServerAddressThe IP address of the RADIUS server
referred to in this table entry.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.3 |
pnacRadiusServerAuthenticationPortThe value is for setting UDP Port.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.5 |
pnacRadiusServerAccountingPortThe value is for setting UDP Port.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.6 |
pnacRadiusServerTimeoutThe value is for setting UDP Port.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.7 |
pnacRadiusServerRetransmitThe value is for setting UDP Port.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.8 |
pnacRadiusServerKeyThis object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.9 |
pnacRadiusServerStatusThe status of this conceptual row in the
pnacRadiusServerTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The pnacRadiusServerIndex objects
must be explicitly set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.23.4.1.1.10 |
companyGuestVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.24 |
sysGuestVlanNameThe VLAN name of guest VLAN.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.24.1 |
sysGuestVlanPortThis object indicates the guest VLAN port members of this device.rw PortList .1.3.6.1.4.1.171.10.134.2.1.24.2 |
sysGuestVlanDelStateUsed to delete the guest VLAN.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.24.3 |
companyMacNotify OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.25 |
sysMacNotifyStateThis object can enabled or disabled MAC Notification.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.25.1 |
sysmacNotifyIntervalThis object indicates the time interval in second for trigger the MAC notify message.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.25.2 |
sysmacNotifyHistorySizeThis object indicates the history size of variation MAC in address table. The default value is 1 .rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.25.3 |
sysmacNotifyCtrlTableA table to control Loopback detection features either for
the entire switch or for each interface in the switch. SEQUENCE OF MacNotifyCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.25.4 |
macNotifyCtrlEntryAn entry appears in this table for each interface
in the system. MacNotifyCtrlEntry .1.3.6.1.4.1.171.10.134.2.1.25.4.1 |
macNotifyPortIndexThe interface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.25.4.1.1 |
macNotifyPortStatusProvides control to per port enable or disable the mac notify status
function. Default is disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.25.4.1.2 |
sysMacNotifyTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.25.5 |
fdbTableChangedA fdbTableChanged notification is sent when dynamic forwarding table
add learning mac; also when one device leave, dynamic forwarding table
delete one mac,a fdbTableChanged notification is sent too.
Note that transmission of fdbTableChanged notifications are throttled by the agent. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.25.5.1 |
companyISMVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.27 |
sysIGMPMulticastVlanStatusEnable/Disable IGMP Multicast Vlan function.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.27.1 |
sysIGMPMulticastVlanTableInformation about the IGMP snooping multicast VLAN table. SEQUENCE OF SysIGMPMulticastVlanEntry .1.3.6.1.4.1.171.10.134.2.1.27.2 |
sysIGMPMulticastVlanEntryThe entry of sysIGMPMulticastVlanTable. SysIGMPMulticastVlanEntry .1.3.6.1.4.1.171.10.134.2.1.27.2.1 |
igmpMulticastVlanidThis object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.27.2.1.1 |
igmpMulticastVlanAddressTypeThis object indicates InetAddressType IGS or MLDro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.27.2.1.2 |
igmpMulticastVlanNameThis object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.27.2.1.3 |
igmpMulticastVlanSourcePortThis object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports.rw PortList .1.3.6.1.4.1.171.10.134.2.1.27.2.1.4 |
igmpMulticastVlanMemberPortThis object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member ports will be forwarded to the source ports.rw PortList .1.3.6.1.4.1.171.10.134.2.1.27.2.1.5 |
igmpMulticastVlanTagMemberPortThis object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN.rw PortList .1.3.6.1.4.1.171.10.134.2.1.27.2.1.6 |
igmpMulticastVlanStateThis object can be used to enable or disable the IGMP snooping multicast VLAN.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.27.2.1.7 |
igmpMulticastVlanReplaceSourceIpThe replacement source IP of this multicast VLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.27.2.1.8 |
igmpMulticastVlanRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.27.2.1.9 |
sysIGMPMulticastVlanGroupTableThe table containing the IGMP snooping multicast VLAN group information SEQUENCE OF SysIGMPMulticastVlanGroupEntry .1.3.6.1.4.1.171.10.134.2.1.27.3 |
sysIGMPMulticastVlanGroupEntryInformation about the current IGMP snooping multicast VLAN group. SysIGMPMulticastVlanGroupEntry .1.3.6.1.4.1.171.10.134.2.1.27.3.1 |
igmpMulticastVlanGroupVidThis object indicates the VID of the IGMP snooping multicast VLAN group.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.27.3.1.1 |
igmpMulticastVlanGroupAddressTypeThis object indicates InetAddressType IGS or MLDro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.27.3.1.2 |
igmpMulticastVlanGroupFromIpSpecifies the multicast address list for this VLAN.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.27.3.1.3 |
igmpMulticastVlanGroupToIpSpecifies the multicast address list for this VLAN.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.27.3.1.4 |
igmpMulticastVlanGroupStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.27.3.1.5 |
companyDHCPRelay OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.28 |
sysDHCPRelayControl OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.28.1 |
dhcpRelayStateThis object indicates DHCP relay function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.28.1.1 |
dhcpRelayHopCountThis object indicates the maximum number of router hops that the BOOTP packets can cross.rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.28.1.2 |
dhcpRelayTimeThresholdThis object indicates the minimum time in seconds within which the switch must relay the DHCP request.
If this time is exceeded, the switch will drop the DHCP packet.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.28.1.3 |
sysDHCPRelayManagement OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.28.2 |
dhcpRelayInterfaceSettingsTableThis table indicates the IP address as a destination to forward (relay) DHCP packets to. SEQUENCE OF DHCPRelayInterfaceSettingsEntry .1.3.6.1.4.1.171.10.134.2.1.28.2.1 |
dhcpRelayInterfaceSettingsEntryA list of information indicates the IP address as a destination to forward (relay) DHCP packets to. DHCPRelayInterfaceSettingsEntry .1.3.6.1.4.1.171.10.134.2.1.28.2.1.1 |
dhcpRelayServerIPThis object indicates the DHCP server IP address.ro IpAddress .1.3.6.1.4.1.171.10.134.2.1.28.2.1.1.1 |
dhcpRelayInterfaceThis object indicates the input Interface Index value mapped to this Server Address Table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.28.2.1.1.2 |
dhcpRelayInterfaceSettingsRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.28.2.1.1.3 |
dhcpRelayManagermentOption82 OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.28.2.2 |
dhcpRelayOption82StateOnly when enabled, the Relay Agent shall do any processing
related to Relay Agent Information Options - like
inserting the necessary options while relaying a packet
from a client to a server and examining/stripping of
options when relaying a packet from a server to a client.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.28.2.2.1 |
dhcpRelayOption82CheckStateThis object indicates DHCP relay option 82 Check function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.28.2.2.2 |
dhcpRelayOption82PolicyThis object indicates DHCP relay option 82 policy.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.28.2.2.3 |
dhcpRelayOption82RemoteIDTypeThis object indicates the type of remote ID.
If the type is default, the remote ID will be the MAC address of the device, otherwise,
the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.28.2.2.4 |
dhcpRelayOption82RemoteIDThis object displays the current remote ID of the device.
If DHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device,
and this object cannot be modified.
If DHCPRelayOption82RemoteIDType is set to user-defined, a new value can be written to this object.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.28.2.2.5 |
companyDHCPLocalRelay OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.29 |
sysDHCPLocalRelayGlobalStateThis object indicates DHCP local relay function is enabled or disabled globally.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.29.1 |
sysDHCPLocalRelayTableThis table indicates the IP address as a destination to forward (local relay) DHCP packets to. SEQUENCE OF DHCPLocalRelayEntry .1.3.6.1.4.1.171.10.134.2.1.29.2 |
dhcpLocalRelayEntryA list of information indicates the IP address as a destination to forward (local relay) DHCP packets to. DHCPLocalRelayEntry .1.3.6.1.4.1.171.10.134.2.1.29.2.1 |
dhcpLocalRelayVlanIdThis object displays the current VLAN ID of the device.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.29.2.1.1 |
dhcpLocalRelayStateThis object indicates DHCP local relay function of VLAN is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.29.2.1.2 |
companyGreenSetting OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.31 |
sysGreenLEDShutoff OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.31.1 |
greenLEDShutoffPortListProvides control to LED port.rw PortList .1.3.6.1.4.1.171.10.134.2.1.31.1.1 |
greenLEDShutoffStateEnable/Disable Green LED function.
Default is disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.31.1.2 |
greenLEDShutoffTimeProfile1The time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.31.1.3 |
greenLEDShutoffTimeProfile2The time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.31.1.4 |
sysGreenPortShutoff OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.31.2 |
greenPortShutoffPortListProvides control to LED port.rw PortList .1.3.6.1.4.1.171.10.134.2.1.31.2.1 |
greenPortShutoffStateEnable/Disable Green LED function.
Default is disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.31.2.2 |
greenPortShutoffTimeProfile1The time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.31.2.3 |
greenPortShutoffTimeProfile2The time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.31.2.4 |
sysGreenSystemHibernation OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.31.4 |
greenSystemHibernationStateEnable/Disable Green LED function.
Default is disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.31.4.1 |
greenSystemHibernationTimeProfile1The time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.31.4.2 |
greenSystemHibernationTimeProfile2The time profile name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.31.4.3 |
greenCableLenDetectionStateEnable/Disable Power Saving Cable Length Detection.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.31.5 |
companyLLDP OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32 |
sysLLDPStateThis object is used for enabling or disabling LLDP in the system.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.32.1 |
sysLLDPMsgHoldMultiplierThe time-to-live value expressed as a multiple of the
lldpMessageTxInterval object.The actual time-to-live value
used in LLDP frames, transmitted on behalf of this LLDP agent,
can be expressed by the following formula: TTL = min(65535,
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier))rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.2 |
sysLLDPMsgTxIntervalThis object is used for LLDP packet update frequency.
The timer in units of seconds.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.3 |
sysLLDPReinitDelayThis object is used for LLDP Reinitialization Delay.
The timer in units of seconds.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.4 |
sysLLDPTxDelayThe lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval).rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.5 |
sysLLDPConfigManAddrTableThe table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports. SEQUENCE OF SyslldpConfigManAddrEntry .1.3.6.1.4.1.171.10.134.2.1.32.6 |
sysLLDPConfigManAddrEntryLLDP configuration information that specifies the set
of ports (represented as a PortList) on which the local
system management address instance will be transmitted.
Each active sysLLDPConfigManAddrEntry must be restored from
non-volatile and re-created (along with the corresponding
lldpLocManAddrEntry) after a re-initialization of the
management system. SyslldpConfigManAddrEntry .1.3.6.1.4.1.171.10.134.2.1.32.6.1 |
lldpConfigManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.6.1.1 |
lldpConfigManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.6.1.2 |
lldpConfigManAddrPortsTxEnableA set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on the
member ports of the lldpManAddrPortsTxEnable.
The default value for lldpConfigManAddrPortsTxEnable object
is empty binary string, which means no ports are specified
for advertising indicated management address instance.rw LldpPortList .1.3.6.1.4.1.171.10.134.2.1.32.6.1.3 |
sysLLDPPortConfigTableThe table that controls LLDP frame transmission on individual
ports. SEQUENCE OF SysLLDPPortConfigEntry .1.3.6.1.4.1.171.10.134.2.1.32.11 |
sysLLDPPortConfigEntryLLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table. SysLLDPPortConfigEntry .1.3.6.1.4.1.171.10.134.2.1.32.11.1 |
lldpPortConfigPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.11.1.1 |
lldpPortConfigAdminStatusThe administratively desired status of the local LLDP agent.
If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it will not store any information
about the remote systems connected.
If the associated lldpPortConfigAdminStatus object has a
value of 'rxOnly(2)', then the LLDP agent will receive,
but it will not transmit LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'txAndRx(3)', then the LLDP agent will transmit
and receive LLDP frames on this port.
If the associated lldpPortConfigAdminStatus object has a
value of 'disabled(4)', then LLDP agent will not transmit or
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
other tables, before the port's lldpPortConfigAdminStatus
becomes disabled, then the information will naturally age out.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.32.11.1.2 |
lldpPortConfigNotificationEnableThe lldpPortConfigNotificationEnable controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they are not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.11.1.3 |
lldpPortConfigTLVsTxEnableThe lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type associated
with a specific optional TLV.
It should be noted that the organizationally-specific TLVs
are excluded from the lldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should
have similar configuration object to control transmission
of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should
transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit
'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit
'System Capabilities TLV'.
There is no bit reserved for the management address TLV type
since transmission of management address TLVs are controlled
by another object, sysLLDPConfigManAddrTable.
The default value for lldpPortConfigTLVsTxEnable object is
empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.171.10.134.2.1.32.11.1.4 |
sysLLDPXdot3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.12 |
lldpXdot3Config OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.12.1 |
lldpXdot3PortConfigTableA table that controls selection of LLDP TLVs to be transmitted
on individual ports. SEQUENCE OF LldpXdot3PortConfigEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.1.1 |
lldpXdot3PortConfigEntryLLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.
Each active lldpXdot3PortConfigEntry must be from non-volatile
storage (along with the corresponding sysLLDPPortConfigEntry)
after a re-initialization of the management system. LldpXdot3PortConfigEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.1.1.1 |
lldpXdot3PortConfigPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable.rw LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.1.1.1.1 |
lldpXdot3PortConfigTLVsTxEnableThe lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV. The bit 0 is not used since there is
no corresponding subtype.
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
The bit 'maxFrameSize(1)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Bits .1.3.6.1.4.1.171.10.134.2.1.32.12.1.1.1.2 |
lldpXdot3LocalData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.12.2 |
lldpXdot3LocPortTableThis table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1 |
lldpXdot3LocPortEntryInformation about a particular port component. LldpXdot3LocPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1 |
lldpXdot3LocPortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.rw LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.1 |
lldpXdot3LocPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.2 |
lldpXdot3LocPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.3 |
lldpXdot3LocPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.4 |
lldpXdot3LocPortOperMauTypeAn integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.2.1.1.5 |
lldpXdot3LocMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF LldpXdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.2.4 |
lldpXdot3LocMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpXdot3LocMaxFrameSizeEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.2.4.1 |
lldpXdot3LocMaxFrameSizePortNumThe value of this object is used as a port index to the
lldpXdot3LocMaxFrameSizeTable.rw LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.2.4.1.1 |
lldpXdot3LocMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the given port of the local system.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.2.4.1.2 |
lldpXdot3RemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.12.3 |
lldpXdot3RemPortTableThis table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpXdot3RemPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1 |
lldpXdot3RemPortEntryInformation about a particular physical network connection. LldpXdot3RemPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1 |
lldpXdot3RemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.1 |
lldpXdot3RemLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.2 |
lldpXdot3RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.3 |
lldpXdot3RemPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.4 |
lldpXdot3RemPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.5 |
lldpXdot3RemPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.6 |
lldpXdot3RemPortOperMauTypeAn integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.3.1.1.7 |
lldpXdot3RemPowerTableThis table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF LldpXdot3RemPowerEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2 |
lldpXdot3RemPowerEntryInformation about a particular physical network connection. LldpXdot3RemPowerEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1 |
lldpXdot3RemPowerTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.1 |
lldpXdot3RemPowerLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.2 |
lldpXdot3RemPowerIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.3 |
lldpXdot3RemPowerPortClassThe value that identifies the port Class of the given port
associated with the remote system.ro LldpPowerPortClass .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.4 |
lldpXdot3RemPowerMDISupportedThe truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.5 |
lldpXdot3RemPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.6 |
lldpXdot3RemPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.7 |
lldpXdot3RemPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.ro Integer32(1|2) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.8 |
lldpXdot3RemPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.ro Integer32(1|2|3|4|5) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.2.1.9 |
lldpXdot3RemLinkAggTableThis table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system. SEQUENCE OF LldpXdot3RemLinkAggEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3 |
lldpXdot3RemLinkAggEntryLink Aggregation information about remote system's port
component. LldpXdot3RemLinkAggEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1 |
lldpXdot3RemLinkAggTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.1 |
lldpXdot3RemLinkAggLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.2 |
lldpXdot3RemLinkAggIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.3 |
lldpXdot3RemLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro LldpLinkAggStatusMap .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.4 |
lldpXdot3RemLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero.ro Integer32(0|1..2147483647) .1.3.6.1.4.1.171.10.134.2.1.32.12.3.3.1.5 |
lldpXdot3RemMaxFrameSizeTableThis table contains one row per port of maximum frame
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system. SEQUENCE OF LldpXdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.4 |
lldpXdot3RemMaxFrameSizeEntryMaximum Frame Size information about a particular port
component. LldpXdot3RemMaxFrameSizeEntry .1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1 |
lldpXdot3RemMaxFrameSizeTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.1 |
lldpXdot3RemMaxFrameSizeLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpXdot3RemPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.2 |
lldpXdot3RemMaxFrameSizeIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpXdot3RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.3 |
lldpXdot3RemMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.12.3.4.1.4 |
sysLLDPXdot1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.13 |
lldpXdot1Config OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.13.1 |
lldpXdot1ConfigPortVlanTableA table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigPortVlanEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.1.1 |
lldpXdot1ConfigPortVlanEntryLLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding sysLLDPPortConfigEntry)
after a re-initialization of the management system. LldpXdot1ConfigPortVlanEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.1.1.1 |
lldpXdot1ConfigVlanPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
sysLLDPPortConfigTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.1.1.1.1 |
lldpXdot1ConfigPortVlanTxEnableThe lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.13.1.1.1.2 |
lldpXdot1ConfigVlanNameTableThe table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigVlanNameEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.1.2 |
lldpXdot1ConfigVlanNameEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.
Each active lldpXdot1ConfigVlanNameEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocVlanNameEntry) after a re-initialization of the
management system. LldpXdot1ConfigVlanNameEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1 |
lldpXdot1LocConfigVlanNamePortNumThe value of this object is used as a port index to the
lldpXdot3LocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1.1 |
lldpXdot1ConfigVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1.2 |
lldpXdot1ConfigVlanNameTxEnableThe boolean value that indicates whether the corresponding
Local System VLAN name instance will be transmitted on the
port defined by the given lldpXdot1LocVlanNameEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.13.1.2.1.3 |
lldpXdot1ConfigProtocolTableThe table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports. SEQUENCE OF LldpXdot1ConfigProtocolEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.1.4 |
lldpXdot1ConfigProtocolEntryLLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.
Each active lldpXdot1ConfigProtocolEntry must be restored
from non-volatile storage (along with the corresponding
lldpXdot1LocProtocolEntry) after a re-initialization of the
management system. LldpXdot1ConfigProtocolEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1 |
lldpXdot1ConfigProtocolPortNumThe value of this object is used as a port index to the
lldpXdot1ConfigProtocolTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1.1 |
lldpXdot1ConfigProtocolIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1.2 |
lldpXdot1ConfigProtocolTxEnableThe boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.13.1.4.1.3 |
lldpXdot1LocalData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.13.2 |
lldpXdot1LocTableThis table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent. SEQUENCE OF LldpXdot1LocEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.2.1 |
lldpXdot1LocEntryInformation about IEEE 802.1 organizationally defined
LLDP extension. LldpXdot1LocEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.2.1.1 |
lldpXdot1LocPortNumThe value of this object is used as a port index to the
lldpXdot1LocTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.2.1.1.1 |
lldpXdot1LocPortVlanIdThe integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation.ro Integer32(0|1..4094) .1.3.6.1.4.1.171.10.134.2.1.32.13.2.1.1.2 |
lldpXdot1LocVlanNameTableThis table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent. SEQUENCE OF LldpXdot1LocVlanNameEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.2.3 |
lldpXdot1LocVlanNameEntryVLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port. LldpXdot1LocVlanNameEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1 |
lldpXdot1LocVlanNamePortNumThe value of this object is used as a port index to the
lldpXdot1LocVlanNameTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1.1 |
lldpXdot1LocVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1.2 |
lldpXdot1LocVlanNameThe string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.
This object should contain the value of the dot1QVLANStaticName
object (defined in IETF RFC 2674) identified with the given
lldpXdot1LocVlanId.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.13.2.3.1.3 |
lldpXdot1LocProtocolTableThis table contains one or more rows per protocol identity
information on the local system known to this agent. SEQUENCE OF LldpXdot1LocProtocolEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.2.4 |
lldpXdot1LocProtocolEntryInformation about particular protocols that are accessible
through the given port component.
There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum. LldpXdot1LocProtocolEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1 |
lldpXdot1LocProtocolPortNumThe value of this object is used as a port index to the
lldpXdot1LocProtocolTable.rw LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1.1 |
lldpXdot1LocProtocolIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1.2 |
lldpXdot1LocProtocolIdThe octet string value used to identify the protocols
associated with the given port of the local system.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.32.13.2.4.1.3 |
lldpXdot1RemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.13.3 |
lldpXdot1RemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port. SEQUENCE OF LldpXdot1RemEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.1 |
lldpXdot1RemEntryInformation about a particular port component. LldpXdot1RemEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1 |
lldpXdot1RemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.1 |
lldpXdot1RemLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.2 |
lldpXdot1RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.3 |
lldpXdot1RemPortVlanIdThe integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of lldpXdot1RemPortVlanId should
be zero.ro Integer32(0|1..4094) .1.3.6.1.4.1.171.10.134.2.1.32.13.3.1.1.4 |
lldpXdot1RemProtoVlanTableThis table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port. SEQUENCE OF LldpXdot1RemProtoVlanEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2 |
lldpXdot1RemProtoVlanEntryPort and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system. LldpXdot1RemProtoVlanEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1 |
lldpXdot1RemProtoVlanTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.1 |
lldpXdot1RemProtoVlanLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.2 |
lldpXdot1RemProtoVlanIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.3 |
lldpXdot1RemProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
lldpXdot1RemProtoVlanId should be zero. Integer32(0|1..4094) .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.4 |
lldpXdot1RemProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.5 |
lldpXdot1RemProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.13.3.2.1.6 |
lldpXdot1RemVlanNameTableThis table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port. SEQUENCE OF LldpXdot1RemVlanNameEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3 |
lldpXdot1RemVlanNameEntryVLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port. LldpXdot1RemVlanNameEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1 |
lldpXdot1RemVlanNameTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.1 |
lldpXdot1RemVlanNameLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemVlanNameLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.2 |
lldpXdot1RemVlanNameIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemVlanNameIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.3 |
lldpXdot1RemVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.4 |
lldpXdot1RemVlanNameThe string value used to identify VLAN name identified by the
VLAN Id associated with the remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.13.3.3.1.5 |
lldpXdot1RemProtocolTableThis table contains one or more rows per protocol information
about the remote system, received on the given port. SEQUENCE OF LldpXdot1RemProtocolEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4 |
lldpXdot1RemProtocolEntryProtocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port. LldpXdot1RemProtocolEntry .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1 |
lldpXdot1RemProtocolTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.1 |
lldpXdot1RemProtocolLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemProtocolLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.2 |
lldpXdot1RemProtocolIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ldpXdot1RemProtocolIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.3 |
lldpXdot1RemProtocolIdIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.4 |
lldpXdot1RemProtocolIdThe octet string value used to identify the protocols
associated with the given port of remote system.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.32.13.3.4.1.5 |
sysLLDPStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.14 |
lldpStatsRemTablesLastChangeTimeThe value of sysUpTime object (defined in IETF RFC 3418)
at the time an entry is created, modified, or deleted in the
in tables associated with the sysLLDPRemoteSystemsData objects
and all LLDP extension objects associated with remote systems.
An NMS can use this object to reduce polling of the
sysLLDPRemoteSystemsData objects.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.32.14.1 |
lldpStatsRemTablesInsertsThe number of times the complete set of information
advertised by a particular MSAP has been inserted into tables
contained in sysLLDPRemoteSystemsData and lldpExtensions objects.
The complete set of information received from a particular
MSAP should be inserted into related tables. If partial
information cannot be inserted for a reason such as lack
of resources, all of the complete set of information should
be removed.
This counter should be incremented only once after the
complete set of information is successfully recorded
in all related tables. Any failures during inserting
information set which result in deletion of previously
inserted information should not trigger any changes in
lldpStatsRemTablesInserts since the insert is not completed
yet or or in lldpStatsRemTablesDeletes, since the deletion
would only be a partial deletion. If the failure was the
result of lack of resources, the lldpStatsRemTablesDrops
counter should be incremented once.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.171.10.134.2.1.32.14.2 |
lldpStatsRemTablesDeletesThe number of times the complete set of information
advertised by a particular MSAP has been deleted from
tables contained in sysLLDPRemoteSystemsData and lldpExtensions
objects.
This counter should be incremented only once when the
complete set of information is completely deleted from all
related tables. Partial deletions, such as deletion of
rows associated with a particular MSAP from some tables,
but not from all tables are not allowed, thus should not
change the value of this counter.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.171.10.134.2.1.32.14.3 |
lldpStatsRemTablesDropsThe number of times the complete set of information
advertised by a particular MSAP could not be entered into
tables contained in sysLLDPRemoteSystemsData and lldpExtensions
objects because of insufficient resources.ro ZeroBasedCounter32 UNITS "table entries" .1.3.6.1.4.1.171.10.134.2.1.32.14.4 |
lldpStatsRemTablesAgeoutsThe number of times the complete set of information
advertised by a particular MSAP has been deleted from tables
contained in sysLLDPRemoteSystemsData and lldpExtensions objects
because the information timeliness interval has expired.
This counter should be incremented only once when the complete
set of information is completely invalidated (aged out)
from all related tables. Partial aging, similar to deletion
case, is not allowed, and thus, should not change the value
of this counter.ro ZeroBasedCounter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.5 |
lldpStatsTxPortTableA table containing LLDP transmission statistics for
individual ports. Entries are not required to exist in
this table while the sysLLDPPortConfigEntry object is equal to
'disabled(4)'. SEQUENCE OF LldpStatsTxPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.14.6 |
lldpStatsTxPortEntryLLDP frame transmission statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port. LldpStatsTxPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.14.6.1 |
lldpStatsTxPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.14.6.1.1 |
lldpStatsTxPortFramesTotalThe number of LLDP frames transmitted by this LLDP agent
on the indicated port.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.6.1.2 |
lldpRxStatsPortTableA table containing LLDP reception statistics for individual
ports. Entries are not required to exist in this table while
the sysLLDPPortConfigEntry object is equal to 'disabled(4)'. SEQUENCE OF LldpRxStatsPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.14.7 |
lldpRxStatsPortEntryLLDP frame reception statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.
All counter values in a particular entry shall be
maintained on a continuing basis and shall not be deleted
upon expiration of rxInfoTTL timing counters in the LLDP
remote systems MIB of the receipt of a shutdown frame from
a remote LLDP agent.
All statistical counters associated with a particular
port on the local LLDP agent become frozen whenever the
adminStatus is disabled for the same port. LldpRxStatsPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1 |
lldpStatsRxPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.1 |
lldpStatsRxPortFramesDiscardedTotalThe number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formating problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exist with the local LLDP agent in the receiving system.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.2 |
lldpStatsRxPortFramesErrorsThe number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.3 |
lldpStatsRxPortFramesTotalThe number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.4 |
lldpStatsRxPortTLVsDiscardedTotalThe number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.5 |
lldpStatsRxPortTLVsUnrecognizedTotalThe number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value
is in the range of reserved TLV types (000 1001 - 111 1110)
in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized
TLV may be a basic management TLV from a later LLDP version.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.6 |
lldpStatsRxPortAgeoutsTotalThe counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained in
sysLLDPRemoteSystemsData and lldpExtensions objects because
the information timeliness interval has expired.
This counter is similar to lldpStatsRemTablesAgeouts, except
that the counter is on a per port basis. This enables NMS to
poll tables associated with the sysLLDPRemoteSystemsData objects
and all LLDP extension objects associated with remote systems
on the indicated port only.
This counter should be set to zero during agent initialization
and its value should not be saved in non-volatile storage.
When a port's admin status changes from 'disabled' to
'rxOnly', 'txOnly' or 'txAndRx', the counter associated with
the same port should reset to 0. The agent should also flush
all remote system information associated with the same port.
This counter should be incremented only once when the
complete set of information is invalidated (aged out) from
all related tables on a particular port. Partial aging
is not allowed, and thus, should not change the value of
this counter.ro ZeroBasedCounter32 .1.3.6.1.4.1.171.10.134.2.1.32.14.7.1.7 |
sysLLDPLocalSystemData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.15 |
lldpLocChassisIdSubtypeThe type of encoding used to identify the chassis
associated with the local system.ro LldpChassisIdSubtype .1.3.6.1.4.1.171.10.134.2.1.32.15.1 |
lldpLocChassisIdThe string value used to identify the chassis component
associated with the local system.ro LldpChassisId .1.3.6.1.4.1.171.10.134.2.1.32.15.2 |
lldpLocSysNameThe string value used to identify the system name of the
local system. If the local agent supports IETF RFC 3418,
lldpLocSysName object should have the same value of sysName
object.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.15.3 |
lldpLocSysDescThe string value used to identify the system description
of the local system. If the local agent supports IETF RFC 3418,
lldpLocSysDesc object should have the same value of sysDesc
object.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.15.4 |
lldpLocSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the local system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.134.2.1.32.15.5 |
lldpLocPortTableThis table contains one or more rows per port information
associated with the local system known to this agent. SEQUENCE OF LldpLocPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.15.7 |
lldpLocPortEntryInformation about a particular port component.
Entries may be created and deleted in this table by the
agent. LldpLocPortEntry .1.3.6.1.4.1.171.10.134.2.1.32.15.7.1 |
lldpLocPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpLocPortTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.1 |
lldpLocPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpLocPortId' object.ro LldpPortIdSubtype .1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.2 |
lldpLocPortIdThe string value used to identify the port component
associated with a given port in the local system.ro LldpPortId .1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.3 |
lldpLocPortDescThe string value used to identify the 802 LAN station's port
description associated with the local system. If the local
agent supports IETF RFC 2863, lldpLocPortDesc object should
have the same value of ifDescr object.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.15.7.1.4 |
lldpLocManAddrTableThis table contains management address information on the
local system known to this agent. SEQUENCE OF LldpLocManAddrEntry .1.3.6.1.4.1.171.10.134.2.1.32.15.8 |
lldpLocManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the system identified by a particular
lldpLocChassisId. Each management address should have
distinct 'management address type' (lldpLocManAddrSubtype) and
'management address' (lldpLocManAddr.)
Entries may be created and deleted in this table by the
agent. LldpLocManAddrEntry .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1 |
lldpLocManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.1 |
lldpLocManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.2 |
lldpLocManAddrLenThe total length of the management address subtype and the
management address fields in LLDPDUs transmitted by the
local LLDP agent.
The management address length field is needed so that the
receiving systems that do not implement SNMP will not be
required to implement an iana family numbers/address length
equivalency table in order to decode the management adress.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.3 |
lldpLocManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the local system.ro LldpManAddrIfSubtype .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.4 |
lldpLocManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the local system.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.5 |
lldpLocManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.15.8.1.6 |
sysLLDPRemoteSystemsData OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.16 |
lldpRemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one lldpRemEntry is present for each local port,
or it may choose to maintain multiple lldpRemEntries for
the same local port.
The following procedure may be used to retrieve remote
systems information updates from an LLDP agent:
1. NMS polls all tables associated with remote systems
and keeps a local copy of the information retrieved.
NMS polls periodically the values of the following
objects:
a. lldpStatsRemTablesInserts
b. lldpStatsRemTablesDeletes
c. lldpStatsRemTablesDrops
d. lldpStatsRemTablesAgeouts
e. lldpStatsRxPortAgeoutsTotal for all ports.
2. LLDP agent updates remote systems MIB objects, and
sends out notifications to a list of notification
destinations.
3. NMS receives the notifications and compares the new
values of objects listed in step 1.
Periodically, NMS should poll the object
lldpStatsRemTablesLastChangeTime to find out if anything
has changed since the last poll. if something has
changed, NMS will poll the objects listed in step 1 to
figure out what kind of changes occurred in the tables.
if value of lldpStatsRemTablesInserts has changed,
then NMS will walk all tables by employing TimeFilter
with the last-polled time value. This request will
return new objects or objects whose values are updated
since the last poll.
if value of lldpStatsRemTablesAgeouts has changed,
then NMS will walk the lldpStatsRxPortAgeoutsTotal and
compare the new values with previously recorded ones.
For ports whose lldpStatsRxPortAgeoutsTotal value is
greater than the recorded value, NMS will have to
retrieve objects associated with those ports from
table(s) without employing a TimeFilter (which is
performed by specifying 0 for the TimeFilter.)
lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
objects are provided for informational purposes. SEQUENCE OF LldpRemEntry .1.3.6.1.4.1.171.10.134.2.1.32.16.1 |
lldpRemEntryInformation about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active. LldpRemEntry .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1 |
lldpRemTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.1 |
lldpRemLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.2 |
lldpRemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.3 |
lldpRemChassisIdSubtypeThe type of encoding used to identify the chassis associated
with the remote system.ro LldpChassisIdSubtype .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.4 |
lldpRemChassisIdThe string value used to identify the chassis component
associated with the remote system.ro LldpChassisId .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.5 |
lldpRemPortIdSubtypeThe type of port identifier encoding used in the associated
'lldpRemPortId' object.ro LldpPortIdSubtype .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.6 |
lldpRemPortIdThe string value used to identify the port component
associated with the remote system.ro LldpPortId .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.7 |
lldpRemPortDescThe string value used to identify the description of
the given port associated with the remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.8 |
lldpRemSysNameThe string value used to identify the system name of the
remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.9 |
lldpRemSysDescThe string value used to identify the system description
of the remote system.ro SnmpAdminString .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.10 |
lldpRemSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the remote system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.11 |
lldpRemSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the remote system.ro LldpSystemCapabilitiesMap .1.3.6.1.4.1.171.10.134.2.1.32.16.1.1.12 |
lldpRemManAddrTableThis table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent. SEQUENCE OF LldpRemManAddrEntry .1.3.6.1.4.1.171.10.134.2.1.32.16.2 |
lldpRemManAddrEntryManagement address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
lldpRemIndex whose information is received on
lldpRemManLocalPortNum of the local system. Each management
address should have distinct 'management address
type' (lldpRemManAddrSubtype) and 'management address'
(lldpRemManAddr.)
Entries may be created and deleted in this table by the
agent. LldpRemManAddrEntry .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1 |
lldpRemManTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.1 |
lldpRemManLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemManLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.2 |
lldpRemManIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemManIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.3 |
lldpRemManAddrSubtypeThe type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object.ro AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.4 |
lldpRemManAddrThe string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.5 |
lldpRemManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.ro LldpManAddrIfSubtype .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.6 |
lldpRemManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the remote system.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.7 |
lldpRemManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.16.2.1.8 |
lldpRemUnknownTLVTableThis table contains information about an incoming TLV which
is not recognized by the receiving LLDP agent. The TLV may
be from a later version of the basic management set.
This table should only contain TLVs that are found in
a single LLDP frame. Entries in this table, associated
with an MAC service access point (MSAP, the access point
for MAC services provided to the LCC sublayer, defined
in IEEE 100, which is also identified with a particular
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
most recently received unrecognized TLV from the same MSAP,
or they will naturally age out when the rxInfoTTL timer
(associated with the MSAP) expires. SEQUENCE OF LldpRemUnknownTLVEntry .1.3.6.1.4.1.171.10.134.2.1.32.16.3 |
lldpRemUnknownTLVEntryInformation about an unrecognized TLV received from a
physical network connection. Entries may be created and
deleted in this table by the agent, if a physical topology
discovery process is active. LldpRemUnknownTLVEntry .1.3.6.1.4.1.171.10.134.2.1.32.16.3.1 |
lldpRemUnknownTimeMarkA TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.ro TimeFilter .1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.1 |
lldpRemUnknownLocalPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemUnknownLocalPortNum
identifies the port on which the remote system information
is received.
The value of this object is used as a port index to the
lldpRemTable.ro LldpPortNumber .1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.2 |
lldpRemUnknownIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the lldpRemUnknownIndex
will wrap between reboots.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.3 |
lldpRemUnknownTLVTypeThis object represents the value extracted from the type
field of the TLV.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.4 |
lldpRemUnknownTLVInfoThis object represents the value extracted from the value
field of the TLV.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.32.16.3.1.5 |
sysLLDPNotification OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.17 |
lldpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.32.17.0 |
lldpRemTablesChangeA lldpRemTablesChange notification is sent when the value
of lldpStatsRemTableLastChangeTime changes. It can be
utilized by an NMS to trigger LLDP remote systems table
maintenance polls.
Note that transmission of lldpRemTablesChange
notifications are throttled by the agent, as specified by the
'lldpNotificationInterval' object.
The first four objects are already mentioned in the standard
LLDP mib. As the Table Updation notification is also sent in the
same notification PDU these objects are moved to proprietary mib. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.1 |
lldpExceedsMaxFrameSizeA lldpExceedsMaxFrameSize notification is sent if the size of LLDP
frame to be transmitted exceeds the maximum frame size (1522 bytes).
This can occur if many number of TLVs need to be included in a single
frame .
It notifies the NMS that the information obtained about this system
from its neighbor is not complete. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.2 |
lldpDupChasisIdA lldpDupChasisId notification sent if the configured
chasisId and Received chasisId from the neighbor is same.
It notifies the NMS that the information obtained from its neighbor
is Duplicate. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.3 |
lldpDupSystemNameA lldpDupSystemName notification sent if the configured
system name and Received system name from the neighbor is same.
It notifies the NMS that the information obtained from its neighbor
is Duplicate. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.4 |
lldpDupManagmentAddressA fsLldpDupManagementAddress notification sent if the configured
management address and Received management address from the
neighbor is same. The received duplicate management address is sent
with the OID as index. Hence lldpRemManAddrIfId is sent in the
value field.
It notifies the NMS that the information obtained from its neighbor
is Duplicate. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.5 |
lldpMisConfigPortVlanIDA lldpMisConfigPortVlanID notification sent if the Port VlanId of
two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.6 |
lldpMisConfigVlanNameA lldpMisConfigVlanName notification sent if the vlan name
of two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.8 |
lldpMisConfigProtocolIdentityA lldpMisConfigProtocolIdentity notification sent if the protocol
identity information (example spanning Tree protocol,
the Link Aggregation protocol and proprietary protocol) of
two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.9 |
lldpMisConfigMaxFrameSizeA lldpMisConfigMaxFrameSize notification sent if the
maximum frame size configuration of two systems connected to
the same link is different.
Difference in maximum frame size can result in loss of frames if
the sending station advertised maximum frame size is larger
than the receiveing station.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.12 |
lldpMisConfigOperMauTypeA lldpMisConfigOperMauType notification sent if the
Operational MauType of the two systems connected to the same link is different.
It notifies the NMS that the information obtained from its neighbor
is mis-configured. NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.32.17.0.13 |
companyCableDiagnostic OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.35 |
sysCableDiagTriggerIndexTrigger an interface index to do cable diagnostic.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.35.1 |
sysCableDiagPair1TestResultCable diagnostics pair 1 test result.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.35.2 |
sysCableDiagPair1FaultDistanceCable Diagnostics pair 1 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.35.3 |
sysCableDiagPair2TestResultCable diagnostics pair 2 test result.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.35.4 |
sysCableDiagPair2FaultDistanceCable diagnostics pair 2 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.35.5 |
sysCableDiagPair3TestResultCable diagnostics pair 3 test result.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.35.6 |
sysCableDiagPair3FaultDistanceCable diagnostics pair 3 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.35.7 |
sysCableDiagPair4TestResultCable diagnostics pair 4 test result.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.35.8 |
sysCableDiagPair4FaultDistanceCable diagnostics pair 4 fault distance.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.35.9 |
sysCableDiagLengthinRangeCable diagnostics length when link up in speed 1G.
(Display in range)ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.35.10 |
companyQinQ OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.37 |
sysQinQSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.37.1 |
qinQGlobalStatusThis object is used to enable/disable the Q-in-Q status.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.37.1.1 |
qinQConfigTableA table that contains Q-in-Q VLAN mode information about each port. SEQUENCE OF QinQConfigEntry .1.3.6.1.4.1.171.10.134.2.1.37.1.2 |
qinQConfigEntryA list of Q-in-Q VLAN mode information for each port. QinQConfigEntry .1.3.6.1.4.1.171.10.134.2.1.37.1.2.1 |
qinQIfIndexThe index of the port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.1 |
qinQRoleStateSets the QinQ Role as NNI or UNI.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.2 |
qinQOuterTPIDSets the QinQ Outer TPID value.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.3 |
qinQMissDropThis object indicates if drop pkts that do not match selective QinQ rulerw Enumeration .1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.4 |
qinQAddInnerTaginnter tag for C-VLAN untag pktsrw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.37.1.2.1.5 |
qinQInnerTPIDSets the QinQ Inner TPID value per systemrw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.37.1.3 |
qinQVlanTranslationTableA table that contains Q-in-Q VLAN translation config. SEQUENCE OF QinQVlanTranslationEntry .1.3.6.1.4.1.171.10.134.2.1.37.1.4 |
qinQVlanTranslationEntryA list of Q-in-Q VLAN translation config . QinQVlanTranslationEntry .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1 |
qinQVlanTransPortNumThe Index value of the port in the system for which this entry
applies. The maximum index value of the port is defined by the
system.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.1 |
qinQVlanTransCVIDThe customer VLAN ID in the customer VLAN tag of an ingress frame
at this specified port or the customer VLAN ID to which the ingress
frame is classified to, at this specified port.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.2 |
qinQVlanTransSVIDS-VLAN Id for the service instance to which this port and this
C-VLAN are mapped to.
ie) CEP,C-VID ===> S-VID.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.3 |
qinQVlanTransActionThis object indicates add outer tag or replace inner tag by outer tag .rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.4 |
qinQVlanTransPriorityThe priority for rule matched outer tag.
-1 means use inner priority.rw INTEGER (-1..7) .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.5 |
qinQVlanTransRowStatusThis object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'. An entry created in this table is
deleted when this object is SET 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.37.1.4.1.6 |
companyTimeRangeMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.38 |
sysTimeRangeSettingTableA table to configure time Range in the system. SEQUENCE OF SysTimeRangeSettingEntry .1.3.6.1.4.1.171.10.134.2.1.38.1 |
timeRangeSettingEntryA schedule entry to configure time Range in the system. SysTimeRangeSettingEntry .1.3.6.1.4.1.171.10.134.2.1.38.1.1 |
timeRangeIndexThe Time Range identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 52.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.1 |
timeRangeNameThe Schedule name associated with the Schedule entry (e.g., `abc, bbb').rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.38.1.1.2 |
timeRangeDateEnable/Disable date range checking while executing time base PoE.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.3 |
timeRangeStartYearStart year of the Schedule entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.4 |
timeRangeStartMonthStart month of the Schedule entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.5 |
timeRangeStartDayStart day of the Schedule entry.
The value must be from 1 to 31.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.6 |
timeRangeStartHourStart hour of the Schedule entry.
The value must be from 0 to 23.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.7 |
timeRangeStartMinuteStart minute of the Schedule entry.
The value must be from 0 to 59.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.8 |
timeRangeEndYearEnd year of the Schedule entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.9 |
timeRangeEndMonthEnd month of the Schedule entry.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.10 |
timeRangeEndDayEnd day of the Schedule entry.
The value must be from 1 to 31.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.11 |
timeRangeEndHourEnd hour of the Schedule entry.
The value must be from 0 to 23.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.12 |
timeRangeEndMinuteEnd minute of the Schedule entry.
The value must be from 0 to 59.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.38.1.1.13 |
timeRangeMondayEnable/Disble scheduling Monday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.14 |
timeRangeTuesdayEnable/Disble scheduling Tuesday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.15 |
timeRangeWednesdayEnable/Disble scheduling Wednesday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.16 |
timeRangeThursdayEnable/Disble scheduling Thursday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.17 |
timeRangeFridayEnable/Disble scheduling Friday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.18 |
timeRangeSaturdayEnable/Disble scheduling Saturday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.19 |
timeRangeSundayEnable/Disble scheduling Sunday.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.38.1.1.20 |
timeRangeRowStatusThe status of an entry in the Time Range Information Table. Only a subset
of the rowstatus variables (active, notinservice, createAndWait, destroy)
are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.38.1.1.21 |
companyLimitIP OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.45 |
syslimitIPMulticastProfileTableA list of the limit ip multicast Profile Table. SEQUENCE OF SyslimitIPMulticastProfileEntry .1.3.6.1.4.1.171.10.134.2.1.45.1 |
limitIPMulticastProfileEntryA limit ip multicast entry maintain by the start IP Address, end ip address, profile id. SyslimitIPMulticastProfileEntry .1.3.6.1.4.1.171.10.134.2.1.45.1.1 |
limitIPMulticastProfileIDThe ProfileID of the limit ip multicast profile entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.45.1.1.1 |
limitIPMulticastIPTypeIndicate the IP type of profile.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.45.1.1.2 |
limitIPMulticastProfileNameThe ProfileName of the limit ip multicast profile entry.rw DisplayString .1.3.6.1.4.1.171.10.134.2.1.45.1.1.3 |
limitIPMulticastProfileStatusThe status of an entry in the limit ip multicast profile Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.45.1.1.4 |
syslimitIPMulticastPortTableA list of the limit ip multicast Port entry Table. SEQUENCE OF SyslimitIPMulticastPortEntry .1.3.6.1.4.1.171.10.134.2.1.45.3 |
limitIPMulticastPortEntryA limit ip multicast entry maintain by the Port Index. SyslimitIPMulticastPortEntry .1.3.6.1.4.1.171.10.134.2.1.45.3.1 |
limitIPMulticastPortIDThe Port Index of the limit ip multicast port entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.45.3.1.1 |
limitIPMulticastPortIPTypeIndicate the IP type of entry.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.45.3.1.2 |
limitIPMulticastPortStateThe limit ip multicast port staterw Enumeration .1.3.6.1.4.1.171.10.134.2.1.45.3.1.3 |
limitIPMulticastPortProfileIDThe limit ip multicast port mapping profileID list.rw PortList .1.3.6.1.4.1.171.10.134.2.1.45.3.1.4 |
limitIPMulticastPortMaxGrpThe limit ip multicast per-port max group.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.45.3.1.5 |
limitIpMulticastRangeTableA list of the limit ip multicast entry Table. SEQUENCE OF LimitIpMulticastRangeEntry .1.3.6.1.4.1.171.10.134.2.1.45.4 |
limitIpMulticastRangeEntryA limit ip multicast entry maintain by the start IP Address, end ip address, profile id. LimitIpMulticastRangeEntry .1.3.6.1.4.1.171.10.134.2.1.45.4.1 |
limitIpMulticastRangeProfileIDThe ProfileID of the limit ip multicast entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.45.4.1.1 |
limitIpMulticastRangeIPTypeIndicate the IP type of entry.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.45.4.1.2 |
limitIpMulticastRangeStartIpAddrThe limit ip multicast IP address is used to set start ipro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.45.4.1.3 |
limitIpMulticastRangeEndIpAddrThe limit ip multicast IP address is used to set end ipro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.45.4.1.4 |
limitIpMulticastRangeStatusThe status of an entry in the limit ip multicast entry Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.45.4.1.5 |
companyMulticastFilter OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.49 |
sysMulticastFilterPortTableA table to control multicast filtering modes. SEQUENCE OF MulticastFilterPortEntry .1.3.6.1.4.1.171.10.134.2.1.49.1 |
multicastFilterPortEntryAn entry appears in this table for each interface in the mcastFiltertem.
Index to the table is the interface index of the port. MulticastFilterPortEntry .1.3.6.1.4.1.171.10.134.2.1.49.1.1 |
multicastFilterPortIndexInterface index of the port for which the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.49.1.1.1 |
multicastFilterPortTypeConfigures the multicast filtering modes as below :
forward -Forwards all unregistered groups.
filter -Filters all unregistered groups.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.49.1.1.2 |
companyIPv6Neighbor OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.50 |
sysIPv6neighborTableA list of the Neighbor Cache Table. SEQUENCE OF IPV6NeighborEntry .1.3.6.1.4.1.171.10.134.2.1.50.1 |
ipv6NeighborEntryA Neighbor cache entry containing the ifindex and ipv6 addr. IPV6NeighborEntry .1.3.6.1.4.1.171.10.134.2.1.50.1.1 |
ipv6NeighborIndexThe interface index of the Neighbor entry.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.50.1.1.1 |
ipv6NeighborAddrAllows the entry of an IP address that will be a Neighbor entry into
the Neighbor Cache Table.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.50.1.1.2 |
ipv6NeighborMacAddrThe MAC address associated of the Neighbor entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.50.1.1.3 |
ipv6NeighborCacheStateThe type associated of the Neighbor entry.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.50.1.1.5 |
ipv6NeighborRowStatusThe status of an entry in the Neighbor Cache Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.50.1.1.7 |
companyEoam OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51 |
sysEoamSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.1 |
eoamTableA table that contains EOAM mode information about each port. SEQUENCE OF EoamEntry .1.3.6.1.4.1.171.10.134.2.1.51.1.2 |
eoamEntryA list of EOAM mode information for each port. EoamEntry .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1 |
eoamIfIndexThe index of the port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.1 |
eoamStateSets the EOAM state enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.2 |
eoamModeSets the EOAM mode as active or passive.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.3 |
eoamReceivedRemoteLoopbackSets the EOAM received or ignore remote loopback packets.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.4 |
eoamRemoteLoopbackSets the EOAM remote loopback start or stop.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.5 |
eoamMaxOAMPDUIndicate the max EOAM PDU received packets.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.6 |
eoamUnidirectionIndicate the eoamUnidirection support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.7 |
eoamLinkMonitoringIndicate the eoam Link Monitoring support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.8 |
eoamVarReqIndicate the eoam variable support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.9 |
eoamRemoteLoopbackSupportIndicate the eoam remote loopback support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.10 |
eoamPDURevThe configuration revision of the OAM entity as reflected in
the latest OAMPDU sent by the OAM entity.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.11 |
eoamOperStatusAt initialization and failure conditions, two OAM entities on
the same full-duplex Ethernet link begin a discovery phase to
determine what OAM capabilities may be used on that link. The
progress of this initialization is controlled by the OA
sublayer.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.12 |
eoamPeerModeIndicate the EOAM peer mode as active or passive.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.13 |
eoamPeerMacAddressThe MAC address of the peer OAM entity.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.14 |
eoamPeerVendorOuiThe OUI of the OAM peer as reflected in the latest
Information OAMPDU received with a Local Information TLV.ro OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.15 |
eoamPeerMaxOAMPDUIndicate the max EOAM peer PDU received packets.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.16 |
eoamPeerUnidirectionIndicate the eoam peer Unidirection support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.17 |
eoamPeerLinkMonitoringIndicate the eoam peer Link Monitoring support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.18 |
eoamPeerVarReqIndicate the eoam peer variable support or not support.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.19 |
eoamPeerPDURevThe configuration revision of the OAM peer as reflected in
the latest OAMPDU. This attribute is changed by the peer
whenever it has a local configuration change for Ethernet OA
on this interface.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.1.2.1.20 |
sysEoamLinkMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.2 |
eoamLinkMonitorTableA table that contains EOAM link monitor information about each port. SEQUENCE OF EoamLinkMonitorEntry .1.3.6.1.4.1.171.10.134.2.1.51.2.1 |
eoamLinkMonitorEntryA list of EOAM link monitor information for each port. EoamLinkMonitorEntry .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1 |
eoamLinkMonitorIfIndexThe index of the port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.1 |
errorSymbolNotifyStateSets the EOAM error symbol notify state enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.2 |
errorSymbolThresholdSets the EOAM error symbol threshold.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.3 |
errorSymbolWindowSets the EOAM error symbol window.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.4 |
errorFrameNotifyStateSets the EOAM error frame notify state enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.5 |
errorFrameThresholdSets the EOAM error frame threshold.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.6 |
errorFrameWindowSets the EOAM error symbol window.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.7 |
errorFrameSecondsNotifyStateSets the EOAM error symbol notify state enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.8 |
errorFrameSecondsThresholdSets the EOAM error symbol threshold.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.9 |
errorFrameSecondsWindowSets the EOAM error symbol window.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.10 |
errorFramePeriodNotifyStateSets the EOAM error symbol notify state enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.11 |
errorFramePeriodThresholdSets the EOAM error symbol threshold.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.12 |
errorFramePeriodWindowSets the EOAM error symbol window.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.13 |
eoamCriticalLinkEventStateSet the EOAM critical link event state.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.2.1.1.14 |
sysEoamStats OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.3 |
sysEoamStatsTableThis table contains statistics for the OAM function on a
particular Ethernet-like interface. There is an entry in the
table for every entry in the dot3OamTable.
The counters in this table are defined as 32-bit entries to
match the counter size as defined in [802.3ah]. Given that
the OA protocol is a slow protocol, the counters increment at
a slow rate. SEQUENCE OF SysEoamStatsEntry .1.3.6.1.4.1.171.10.134.2.1.51.3.1 |
eoamStatsEntryAn entry in the table containing statistics information on
the Ethernet OAM function for a single Ethernet-like
interface. Entries are automatically created for every entry
in the dot3OamTable. Counters are maintained across
transitions in dot3OamOperStatus. SysEoamStatsEntry .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1 |
eoamInfomationIndexA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.1 |
eoamInformationTxA count of the number of Information OAMPDUs transmitted on
this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.2 |
eoamInformationRxA count of the number of Information OAMPDUs received on this
interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.3 |
eoamUniqueEventNotificationTxA count of the number of unique Event OAMPDUs transmitted on
this interface. Event Notifications may be sent in duplicate
to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
Duplicate Event Notification transmissions are counted by
eoamDuplicateEventNotificationTx.
A unique Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
distinct from the previously transmitted Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.4 |
eoamUniqueEventNotificationRxA count of the number of unique Event OAMPDUs received on
this interface. Event Notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit. Duplicate Event Notification receptions are counted
by eoamDuplicateEventNotificationRx.
A unique Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
distinct from the previously received Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.5 |
eoamDuplicateEventNotificationTxA count of the number of duplicate Event OAMPDUs transmitted
on this interface. Event Notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit.
A duplicate Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
identical to the previously transmitted Event Notification
OAMPDU Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.6 |
eoamDuplicateEventNotificationRxA count of the number of duplicate Event OAMPDUs received on
this interface. Event Notification OAMPDUs may be sent in
duplicate to increase the probability of successfully being
received, given the possibility that a frame may be lost in
transit.
A duplicate Event Notification OAMPDU is indicated as an Event
Notification OAMPDU with a Sequence Number field that is
identical to the previously received Event Notification OAMPDU
Sequence Number.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.7 |
eoamLoopbackControlTxA count of the number of Loopback Control OAMPDUs transmitted
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.8 |
eoamLoopbackControlRxA count of the number of Loopback Control OAMPDUs received
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.9 |
eoamVariableRequestTxA count of the number of Variable Request OAMPDUs transmitted
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.10 |
eoamVariableRequestRxA count of the number of Variable Request OAMPDUs received on
this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.11 |
eoamVariableResponseTxA count of the number of Variable Response OAMPDUs
transmitted on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.12 |
eoamVariableResponseRxA count of the number of Variable Response OAMPDUs received
on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.13 |
eoamOrgSpecificTxA count of the number of Organization Specific OAMPDUs
transmitted on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.14 |
eoamOrgSpecificRxA count of the number of Organization Specific OAMPDUs
received on this interface.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.15 |
eoamUnsupportedCodesTxA count of the number of OAMPDUs transmitted on this
interface with an unsupported op-code.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.16 |
eoamUnsupportedCodesRxA count of the number of OAMPDUs received on this interface
with an unsupported op-code.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.17 |
eoamFramesLostDueToOamA count of the number of frames that were dropped by the OA
multiplexer. Since the OAM multiplexer has multiple inputs
and a single output, there may be cases where frames are
dropped due to transmit resource contention. This counter is
incremented whenever a frame is dropped by the OAM layer.
Note that any Ethernet frame, not just OAMPDUs, may be dropped
by the OAM layer. This can occur when an OAMPDU takes
precedence over a 'normal' frame resulting in the 'normal'
frame being dropped.
When this counter is incremented, no other counters in this
MIB are incremented.
Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by
the value of the ifCounterDiscontinuityTime.ro Counter32 UNITS "frames" .1.3.6.1.4.1.171.10.134.2.1.51.3.1.1.18 |
sysEoamStatsClearPortlistClear Eoam statistics according to portlist settingrw PortList .1.3.6.1.4.1.171.10.134.2.1.51.3.2 |
sysEoamEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.4 |
sysOamEventLogTableThis table records a history of the events that have occurred
at the Ethernet OAM level. These events can include locally
detected events, which may result in locally generated
OAMPDUs, and remotely detected events, which are detected by
the OAM peer entity and signaled to the local entity via
Ethernet OAM. Ethernet OAM events can be signaled by Event
Notification OAMPDUs or by the flags field in any OAMPDU.
This table contains both threshold crossing events and
non-threshold crossing events. The parameters for the
threshold window, threshold value, and actual value
(eoamEventLogWindowXX, eoamEventLogThresholdXX,
eoamEventLogValue) are only applicable to threshold
crossing events, and are returned as all F's (2^32 - 1) for
non-threshold crossing events.
Entries in the table are automatically created when such
events are detected. The size of the table is implementation
dependent. When the table reaches its maximum size, older
entries are automatically deleted to make room for newer
entries. SEQUENCE OF SysEoamEventLogEntry .1.3.6.1.4.1.171.10.134.2.1.51.4.2 |
eoamEventLogEntryAn entry in the eoamEventLogTable. Entries are
automatically created whenever Ethernet OAM events occur at
the local OAM entity, and when Event Notification OAMPDUs are
received at the local OAM entity (indicating that events have
occurred at the peer OAM entity). The size of the table is
implementation dependent, but when the table becomes full,
older events are automatically deleted to make room for newer
events. The table index eoamEventLogIndex increments for
each new entry, and when the maximum value is reached, the
value restarts at zero. SysEoamEventLogEntry .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1 |
eoamEventLogPortA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.1 |
eoamEventLogIndexAn arbitrary integer for identifying individual events
within the event log.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.2 |
eoamEventLogTimestampThe object indicates eoam event log time stamp which in the format:
day/month/year hour:minute:second. e.g 30/10/2013 17:36:11.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.3 |
eoamEventLogTypeThe type of event that generated this entry in the event log.
When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following
event types are defined:
erroredSymbolEvent(1),
erroredFramePeriodEvent(2),
erroredFrameEvent(3),
erroredFrameSecondsEvent(4),
linkFault(256),
dyingGaspEvent(257),
criticalLinkEvent(258)
The first four are considered threshold crossing events, as
they are generated when a metric exceeds a given value within
a specified window. The other three are not threshold
crossing events.
When the OUI is not 71874 (0x0180C2 in hex), then some other
organization has defined the event space. If event subtyping
is known to the implementation, it may be reflected here.
Otherwise, this value should return all F's (2^32 - 1).ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.4 |
eoamEventLogLocationWhether this event occurred locally (local(1)), or was
received from the OAM peer via Ethernet OAM (remote(2)).ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.5 |
eoamEventLogValueThe Ethernet OAM event log event value.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.6 |
eoamEventLogWindowThe Ethernet OAM event log window value.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.7 |
eoamEventLogThresholdThe Ethernet OAM event log Threshold value.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.8 |
eoamEventLogAccErrorThe Ethernet OAM event log accumulate errors.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.4.2.1.9 |
sysEoamEventLogClearPortlistClear Eoam Event Log Table according to portlist settingrw PortList .1.3.6.1.4.1.171.10.134.2.1.51.4.3 |
sysEoamTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.5 |
eoamTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.5.0 |
eoamNotifyThresholdEventeoamNotifyThresholdEvent trap is sent when a local or remote
threshold crossing event is detected NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.51.5.0.1 |
eoamNotifyNonThresholdEventeoamNotifyNonThresholdEvent trap is sent when a local or remote
non-threshold crossing event is detected NOTIFICATION-TYPE .1.3.6.1.4.1.171.10.134.2.1.51.5.0.2 |
sysEoamLoopbackTest OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.51.6 |
eoamLoopbackTestTableThis table contains objects to configure Remote Loopback
mode and loopback tests. SEQUENCE OF EoamLoopbackTestEntry .1.3.6.1.4.1.171.10.134.2.1.51.6.1 |
eoamLoopbackTestEntryThis table contains remote loopback configuration and
loopback test configuration. EoamLoopbackTestEntry .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1 |
eoamLoopbackTestIndexfault management loopback port index.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.1 |
eoamLoopbackStatusThe loopback status of the local interface. This status is
obtained from the local EOAM Client. When operating in
normal mode with no loopback in progress, the status reads
noLoopback(1).
If the local OAM client knows that the remote OAM entity is in
loopback mode , the status is remoteLoopback(2).
The unknown(3) status indicates the loopback status is not
known.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.2 |
eoamLoopbackTestPatternTest Pattern for the remote loopback test. The default pattern
of the test data will be 'F0F0F0F0'Hrw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.3 |
eoamLoopbackTestPktSizeTest packet size for the remote loopback testrw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.4 |
eoamLoopbackTestCountNumber of Test packets to be sent for the remote
loopback testrw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.5 |
eoamLoopbackTestWaitTimeThis timer is started after sending the last test packet.
The Fault management module will wait until this timer
expires or the packet reception counter is equal to the
transmission counter. This timer (in seconds) denotes the
maximum time a packet can take to get looped back.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.6 |
eoamLoopbackTestCommandThis attribute initiates remote loopback test with
an EOAM peer. Writing startLoopbackTest(2) to this attribute
cause the fault management send loopback test packets with
defined test pattern, size and count.
Writing noLoopbackTest to this attribute has no effect.
Writes to this attribute are ignored unless the fsFmLoopbackStatus
of this interface is 'remoteLoopback'.
The attribute always returns noLoopbackTest on a read.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.7 |
eoamLoopbackTestStatusThis attribute indicates the status of the remote loopback
test.
'notInitiated' indicates that the loopback has not been
initiated yet.
'loopbackbTestInprogress' indicates that the loopback test is in
progress.
'loopbackbTestCompleted' indicates that the loopback test has been
completed.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.8 |
eoamLoopbackTestStartTimestampStart timestamp of the current loopback test.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.9 |
eoamLoopbackTestEndTimestampEnd timestamp of the current loopback test.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.10 |
eoamLoopbackTestTxCountStatistics of number of Test packets transmitted during
current loopback test.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.11 |
eoamLoopbackTestRxCountStatistics of number of Test packets received during
current loopback test.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.12 |
eoamLoopbackTestMatchCountStatistics of number of Test packets that matched with the
test pattern sent during current loopback test.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.1.1.13 |
eoamLoopbackStatsTableThis table contains statistics of the last remote loopback
test. SEQUENCE OF EoamLoopbackStatsEntry .1.3.6.1.4.1.171.10.134.2.1.51.6.2 |
eoamLoopbackStatsEntryThis table contains remote loopback test results of the
last session. This table is updated every time a new loopback
test session is started. The current fsFmLBTestTxCount,
fsFmLBTestRxCount and fsFmLBTestMatchCount are copied to
this table before starting the new test. EoamLoopbackStatsEntry .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1 |
eoamLoopbackStatsIndexfault management loopback port index.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.1 |
eoamLoopbackStatsStartTimestampStart timestamp of the current loopback test.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.2 |
eoamLoopbackStatsEndTimestampEnd timestamp of the current loopback test.ro DisplayString .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.3 |
eoamLoopbackStatsTxCountStatistics of number of Test packets transmitted during
last loopback test.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.4 |
eoamLoopbackStatsRxCountStatistics of number of Test packets received during
last loopback test.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.5 |
eoamLoopbackStatsMatchCountStatistics of number of Test packets that matched with the
test pattern sent.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.51.6.2.1.6 |
companyDuld OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.52 |
sysDuld OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.52.1 |
duldTableA table that contains DULD mode information about each port. SEQUENCE OF DuldEntry .1.3.6.1.4.1.171.10.134.2.1.52.1.1 |
duldEntryA list of DULD mode information for each port. DuldEntry .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1 |
duldIfIndexThe index of the port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.1 |
duldStateSets the DULD admin state enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.2 |
duldOperStateGets the DULD Oper state enabled or disabled.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.3 |
duldModeSets the DULD mode as shutdown or normal.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.4 |
duldLinkStatusGets the DULD link status.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.5 |
duldDiscoveryTimeSets the DULD discovery time.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.52.1.1.1.6 |
companyEee OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.60 |
sysEee OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.60.1 |
eeeTableA table that contains EEE status about each port. SEQUENCE OF EeeEntry .1.3.6.1.4.1.171.10.134.2.1.60.1.1 |
eeeEntryA list of EEE status for each port. EeeEntry .1.3.6.1.4.1.171.10.134.2.1.60.1.1.1 |
eeePortThis object indicates the port index.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.60.1.1.1.1 |
eeestatusThis object indicates the port eee status.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.60.1.1.1.2 |
companyDHCPv6Relay OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.86 |
sysDHCPv6RelayControl OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.86.1 |
dhcpv6RelayStateThis object indicates DHCPv6 relay function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.86.1.1 |
dhcpv6RelayHopCountThis object indicates the maximum number of router hops that the DHCPv6 packets can cross.rw INTEGER .1.3.6.1.4.1.171.10.134.2.1.86.1.2 |
sysDHCPv6RelayManagement OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.86.2 |
dhcpv6RelayInterfaceTableThis table indicates the IP address as a destination to forward (relay) DHCP packets to. SEQUENCE OF Dhcpv6RelayInterfaceEntry .1.3.6.1.4.1.171.10.134.2.1.86.2.1 |
dhcpv6RelayInterfaceEntryA list of information indicates the IP address as a destination to forward (relay) DHCP packets to. Dhcpv6RelayInterfaceEntry .1.3.6.1.4.1.171.10.134.2.1.86.2.1.1 |
dhcpv6RelayServerIPThis object indicates the DHCP server IP address.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.86.2.1.1.1 |
dhcpv6RelayInterfaceThis object indicates the input Interface Index value mapped to this Server Address Table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.86.2.1.1.2 |
dhcpv6RelayRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.86.2.1.1.3 |
sysDHCPv6RelayOption37 OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.86.3 |
dhcpv6RelayOption37StateThis object indicates DHCPv6 relay option 37 function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.86.3.1 |
dhcpv6RelayOption37CheckStateThis object indicates DHCPv6 relay option 37 Check function is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.86.3.2 |
dhcpv6RelayOption37RemoteIDTypeThis object indicates the type of remote ID.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.86.3.3 |
dhcpv6RelayOption37RemoteIDThis object displays the current remote ID of the device.
If RemoteIDType is set to default, the value will be the MAC address of the device,
and this object cannot be modified.
If RemoteIDType is set to user-defined, a new value can be written to this object.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.86.3.4 |
companyMldsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.88 |
sysMldsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.88.1 |
mldsStatusEnables or disables MLD snooping in the system.
When set to 'enabled', the MLDS module starts
protocol operations.
When set to 'disabled', the MLDS module stops performing
protocol operations.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.88.1.1 |
sysMldsVlan OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.88.3 |
mldsVlanRouterTableThis table contains the list of ports through which
a router, in a particular VLAN is reachable. SEQUENCE OF MldsVlanRouterEntry .1.3.6.1.4.1.171.10.134.2.1.88.3.3 |
mldsVlanRouterEntryContains the VLAN ID and list of ports on which
routers are present in the VLAN. MldsVlanRouterEntry .1.3.6.1.4.1.171.10.134.2.1.88.3.3.1 |
mldsVlanRouterVlanIdVLAN ID of the ports through which router is reachable.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.3.1.1 |
mldsVlanRouterStaticPortListList of static ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.rw PortList .1.3.6.1.4.1.171.10.134.2.1.88.3.3.1.2 |
mldsVlanRouterDynamicPortListList of dynamic ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.ro PortList .1.3.6.1.4.1.171.10.134.2.1.88.3.3.1.3 |
mldsVlanFilterTableThis table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is
enabled in the system. SEQUENCE OF MldsVlanFilterEntry .1.3.6.1.4.1.171.10.134.2.1.88.3.4 |
mldsVlanFilterEntryContains snooping status , version and fast leave
configuration for a specific VLAN. MldsVlanFilterEntry .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1 |
mldsVlanFilterVlanIdIndex of MldsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in MldsVlanFilterEntry is to be done.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.1 |
mldsVlanSnoopStatusThis object allows you to enable/disable MLDS function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.2 |
mldsVlanQuerierIndicates whether the switch is configured as a querier in the VLANro Enumeration .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.3 |
mldsVlanCfgQuerierThe snooping switch can be configured as a querier via this object
to send out MLD general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.4 |
mldsVlanQueryIntervalThis is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in the network.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.5 |
mldsVlanFastLeaveEnables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing the port from the
forwarding table. If set to 'enabled', the switch does not
send a group specific query and immediately removes the port
from the forwarding table.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.6 |
mldsVlanQuerierVersionThis object allows you to set igmp version function on a specific VLAN.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.7 |
mldsVlanRouterPortPurgeIntervalThis is the interval (in seconds) after which a learnt
router port entry will be purged for a specific VLAN.
For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router port entry is purged. However
if control messages are received from the router before the
timer expiry, then the timer is restarted.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.8 |
mldsVlanHostPortPurgeIntervalThis is the interval (in seconds) after which a learnt
port entry will be purged for a specific VLAN.
For each port on which report
has been received this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever a report
message is received from a host on the specific port. If
the timer expires, then , the learnt port entry will
be purged from the multicast group.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.9 |
mldsVlanRobustnessValueWhen the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
queries sent by the switch before deleting
the port from the group membership information in the forwarding
database. If the maximum retry count exceeds 'RobustnessValue',
then the port will be deleted from the multicast group membership
information in the forwarding database and received leave message
will be forwarded onto the router ports if there are no
interested receivers for the group.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.10 |
mldsVlanGrpQueryIntervalThe value of this attribute defines the time period with which
the specific VLAN will send group specific queries on a port to check
if there is any interested receivers. The switch will send
'RobustnessValue' queries before removing the port from the
group membership information in the forwarding database.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.11 |
mldsVlanQueryMaxResponseTimeThe maximum query response time advertised General
queries on this interface.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.4.1.12 |
mldsVlanMulticastGroupTableThis table contains MAC based multicast forwarding
information. SEQUENCE OF MldsVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.134.2.1.88.3.5 |
mldsVlanMulticastGroupEntryThis table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded. MldsVlanMulticastGroupEntry .1.3.6.1.4.1.171.10.134.2.1.88.3.5.1 |
mldsVlanMulticastGroupVlanIdVLAN ID pertaining to the Multicast forwarding entryro Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.1 |
mldsVlanMulticastGroupIpAddressMulticast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.2 |
mldsVlanMulticastGroupMacAddressMulticast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.3 |
mldsVlanMulticastGroupPortListList of ports onto which the multicast data
packets destined for this group will be forwarded.ro PortList .1.3.6.1.4.1.171.10.134.2.1.88.3.5.1.4 |
sysMldsHost OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.88.4 |
mldsHostTableThis table is used to manage
the mld snooping Host based Fast Leave function of the switch. SEQUENCE OF MldsHostEntry .1.3.6.1.4.1.171.10.134.2.1.88.4.1 |
mldsHostEntryContains management entities for
mld snooping Host based function. MldsHostEntry .1.3.6.1.4.1.171.10.134.2.1.88.4.1.1 |
mldsHostTableVLANIDVLAN ID of mld snooping Host table entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.1 |
mldsHostTableGroupAddressGroup address of mld snooping Host table entry.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.2 |
mldsHostTablePortPort number of mld snooping Host table entry.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.3 |
mldsHostTableHostIPAddressHost IP address of Group in mld snooping Host table entry.ro Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.88.4.1.1.4 |
companyTraceRoute OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.90 |
sysTraceRouteCtlAddressTypeSpecifies the type of host address to be used on the
traceroute request at the remote host, 1(ipv4), 2(ipv6).rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.90.1 |
sysTraceRouteCtlAddressSpecifies the host address used on the
traceroute request at the remote host. The
host address type can be determined by
examining the value of the corresponding
sysTraceRouteCtlTargetAddressType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.90.2 |
sysTraceRouteCtlTimeOutSpecifies the time-out value, in seconds, for
a traceroute request.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.90.3 |
sysTraceRouteCtlTTLSpecifies the time-to-live value.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.90.4 |
sysTraceRouteCtlPortSpecifies the (initial) UDP port to send the traceroute
request to. A port needs to be specified that is not in
use at the destination (target) host. The default
value for this object is the IANA assigned port,
33434, for the traceroute function.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.90.5 |
sysTraceRouteCtlProbeSpecifies the number of times to reissue a traceroute
request with the same time-to-live (TTL) value.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.90.6 |
sysTraceRouteCtlAdminStatusControl the traceroute action state, value should be in:
enabled(1) - Attempt to activate the test as configure.
disabled(2) - Deactivate the test.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.90.7 |
sysTraceRouteHistoryTableDefines the Remote Operations Traceroute Results Table
for storing the results of a traceroute operation.
An implementation of this MIB will remove the oldest
entry in the traceRouteProbeHistoryTable of the
corresponding entry in the traceRouteCtlTable to allow
the addition of a new entry once the number of rows in
the traceRouteProbeHistoryTable reaches the value specified
by traceRouteCtlMaxRows for the corresponding entry in the
traceRouteCtlTable. SEQUENCE OF SysTraceRouteHistoryEntry .1.3.6.1.4.1.171.10.134.2.1.90.8 |
traceRouteHistoryEntryDefines a table for storing the results of a traceroute
operation. Entries in this table are limited by
the value of the corresponding traceRouteCtlMaxRows
object.
The first two index elements identify the
traceRouteCtlEntry that a traceRouteProbeHistoryEntry
belongs to. The third index element selects a single
traceroute operation result. The fourth and fifth indexes
select the hop and the probe for a particular
traceroute operation. SysTraceRouteHistoryEntry .1.3.6.1.4.1.171.10.134.2.1.90.8.1 |
traceRouteHistoryIndexAn entry in this table is created when the result of
a traceroute probe is determined. The initial 2 instance
identifier index values identify the traceRouteCtlEntry
that a probe result (traceRouteProbeHistoryEntry) belongs
to. An entry is removed from this table when
its corresponding traceRouteCtlEntry is deleted.ro Unsigned32 (1..'ffffffff'h) .1.3.6.1.4.1.171.10.134.2.1.90.8.1.1 |
traceRouteHistoryHopIndexIndicates which hop in a traceroute path the probe's
results are for. The value of this object is initially
determined by the value of traceRouteCtlInitialTtl.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.90.8.1.2 |
traceRouteHistoryProbeIndexIndicates the index of a probe for a particular
hop in a traceroute path. The number of probes per
hop is determined by the value of the corresponding
traceRouteCtlProbesPerHop object.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.90.8.1.3 |
traceRouteHistoryHAddrTypeThis objects indicates the type of address stored
in the corresponding traceRouteHistoryHAddr
object.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.90.8.1.4 |
traceRouteHistoryHAddrThe address of a hop in a traceroute path. This object
is not allowed to be a DNS name. The value of the
corresponding object, traceRouteHistoryHAddrType,
indicates this object's IP address type.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.90.8.1.5 |
traceRouteHistoryResponseThe amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.171.10.134.2.1.90.8.1.6 |
traceRouteHistoryStatusThe result of a traceroute operation made by a remote
host for a particular probe.ro OperationResponseStatus .1.3.6.1.4.1.171.10.134.2.1.90.8.1.7 |
companyPPPoE OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.98 |
sysPppoeGlobalStatePPPoE global staterw Enumeration .1.3.6.1.4.1.171.10.134.2.1.98.1 |
sysPppoePortTableA table to control PPPoE features of the device. SEQUENCE OF SyspppoePortEntry .1.3.6.1.4.1.171.10.134.2.1.98.2 |
pppoePortEntryAn entry appears in PPPoE table for each interface
in the system. SyspppoePortEntry .1.3.6.1.4.1.171.10.134.2.1.98.2.1 |
pppoePortIndexInterface index of the port for the configuration
in this entry applies.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.98.2.1.1 |
pppoePortStatePPPoE per port staterw Enumeration .1.3.6.1.4.1.171.10.134.2.1.98.2.1.2 |
pppoePortCircuitIDTypePPPoE per port circuit ID typerw Enumeration .1.3.6.1.4.1.171.10.134.2.1.98.2.1.3 |
pppoePortUDFStringPPPoE per port UDF stringrw DisplayString .1.3.6.1.4.1.171.10.134.2.1.98.2.1.4 |
companyStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.99 |
sysStatisticsTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF SysStatisticsEntry .1.3.6.1.4.1.171.10.134.2.1.99.1 |
statisticsEntryAn entry containing management information applicable to a
particular interface. SysStatisticsEntry .1.3.6.1.4.1.171.10.134.2.1.99.1.1 |
statisticsIndexA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.10.134.2.1.99.1.1.1 |
statisticsInOctetsThe total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter64 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.2 |
statisticsInUcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.3 |
statisticsInMcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.4 |
statisticsInNUcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifInMulticastPkts and
ifInBroadcastPkts.rodeprecated Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.5 |
statisticsInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.6 |
statisticsInErrorsFor packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.7 |
statisticsOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter64 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.8 |
statisticsOutUcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.9 |
statisticsOutNUcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifOutMulticastPkts
and ifOutBroadcastPkts.rodeprecated Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.10 |
statisticsOutErrorsFor packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.11 |
statisticsOutDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.12 |
statisticsLateCollisionsThe number of times that a collision is
detected on a particular interface later than
one slotTime into the transmission of a packet.
A (late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.13 |
statisticsExcessiveCollisionsA count of frames for which transmission on a
particular interface fails due to excessive
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.14 |
statisticsFCSErrorsA count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received with
frame-too-long or frame-too-short error.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
Note: Coding errors detected by the physical
layer for speeds above 10 Mb/s will cause the
frame to fail the FCS check.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFCSErrors object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.15 |
statisticsFrameTooLongsA count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 80 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFrameTooLongs object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.16 |
statisticsEtherUndersizePktsThe total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.99.1.1.17 |
statisticsEtherOversizePktsThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.99.1.1.18 |
statisticsEtherFragmentsThe total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a
bad FCS with a non-integral number of octets (Alignment
Error).
Note that it is entirely normal for statisEtherFragments to
increment. This is because it counts both runts (which are
normal occurrences due to collisions) and noise hits.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.99.1.1.19 |
statisticsEtherJabbersThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.171.10.134.2.1.99.1.1.20 |
statisticsEtherDropEventsThe total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has been detected.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.21 |
statisticsDeferredTransmissionsA count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.22 |
statisticsSingleCollisionFramesA count of frames that are involved in a single
collision, and are subsequently transmitted
successfully.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsMultipleCollisionFrames
object.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.23 |
statisticsStatsCollisionsThe best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
would.
Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions.
Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.24 |
statisticsPkts64OctetsThe number of pkts that it's length is 64 bytes.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.25 |
statisticsPkts65to127OctetsThe number of Rx pkts that it's length is 65-127 bytes.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.26 |
statisticsPkts128to255OctetsThe number of Rx pkts that it's length is 128-255 bytes.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.27 |
statisticsPkts256to511OctetsThe number of Rx pkts that it's length is 256-511 bytes.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.28 |
statisticsPkts512to1023OctetsThe number of Rx pkts that it's length is 512-1023 bytes.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.29 |
statisticsPkts1024to1518OctetsThe number of Rx pkts that it's length is 1024-1518 bytes.ro Counter32 .1.3.6.1.4.1.171.10.134.2.1.99.1.1.30 |
sysStatisticsClearTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF SysStatisticsClearEntry .1.3.6.1.4.1.171.10.134.2.1.99.2 |
statisticsClearEntryAn entry containing management information applicable to a
particular interface. SysStatisticsClearEntry .1.3.6.1.4.1.171.10.134.2.1.99.2.1 |
statisticsClearIndexA unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initialization of
the entity's network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.99.2.1.1 |
statisticsClearStatusEnable or disable statistics Counters Clear on read by port.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.99.2.1.2 |
companyPing OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.100 |
sysPingDestIpTypeThe IP address type of the node to be pinged.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.100.1 |
sysPingDestIpAddrThe IP address of the node to be pinged, set ip type before set it.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.100.2 |
sysPingTimeoutThe time in seconds after which the entity waiting
for the ping response times out.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.100.3 |
sysPingTimesThe number of times the given node address is to be pinged.
value 0 for infinite times.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.100.4 |
sysPingStartThe ping event of ping operate.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.100.5 |
sysPingStatusThe current status of the Ping operatero Enumeration .1.3.6.1.4.1.171.10.134.2.1.100.6 |
sysPingSuccessesThe number of ping responses received.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.100.7 |
companyDDP OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.101 |
sysDDPStatusEnable/Disable DDP function.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.101.1 |
sysDDPReportTimeSet DDP report time seconds.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.101.2 |
sysDDPTableDefine sysDDPTable for per port settings. SEQUENCE OF SysDDPEntry .1.3.6.1.4.1.171.10.134.2.1.101.3 |
ddpEntryDefine sysDDPTable for per port settings. SysDDPEntry .1.3.6.1.4.1.171.10.134.2.1.101.3.1 |
ddpPortThis object indicates the port index.ro INTEGER .1.3.6.1.4.1.171.10.134.2.1.101.3.1.1 |
ddpPortStatusThis object indicates DDP status is enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.101.3.1.2 |
companySession OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.102 |
syssessionTableA Table contain the user login session information. SEQUENCE OF SyssessionEntry .1.3.6.1.4.1.171.10.134.2.1.102.1 |
syssessionEntryA Session Table contain the user login information. SyssessionEntry .1.3.6.1.4.1.171.10.134.2.1.102.1.1 |
sessionIDThe index of session table.ro Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.102.1.1.1 |
sessionUserNameThe name of login user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.102.1.1.2 |
sessionUserPrivilegelogin user privilege.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.102.1.1.3 |
sessionLoginTimeThe time at which user login.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.102.1.1.4 |
sessionLiveTimeThe time peroid user has kept login.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.102.1.1.5 |
sessionTypelogin from http or telnet.ro Enumeration .1.3.6.1.4.1.171.10.134.2.1.102.1.1.6 |
sessionIPlogin ip through http or telnet.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.102.1.1.7 |
companyACL OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.103 |
sysAclProfile OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.103.1 |
aclL2ProfileTableA Table contain the L2 acl profile infomation. SEQUENCE OF AclL2ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.103.1.1 |
aclL2ProfileEntryEntries of the aclL2ProfileTable AclL2ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1 |
aclL2ProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.1 |
aclL2RuleCountRule count in this profile.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.2 |
aclL2SrcMacMaskL2 source mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.3 |
aclL2DstMacMaskL2 destination mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.4 |
aclL28021pCheckConfigure to decide whether to do 802.1p field check.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.5 |
aclL2VlanIdCheckConfigure to decide whether to do vlan id field check.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.6 |
aclL2EtherTypeCheckConfigure to decide whether to do ether type checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.7 |
aclL2ProfileStatusThis object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if there is no configuration conflict.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.1.1.1.8 |
aclL3ProfileTableA Table contain the L3 IPv4 acl profile infomation. SEQUENCE OF AclL3ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.103.1.2 |
aclL3ProfileEntryEntries of the aclIpv4ProfileTable AclL3ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1 |
aclL3ProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.1 |
aclL3RuleCountRule count in this profile.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.2 |
aclL3ProfileTypeCurrent profile type, valid type is ipv4 and ipv6rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.3 |
aclL3Ip4SrcAddrMaskL3 IPv4 source address filter mask.rw IpAddress .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.4 |
aclL3Ip4DstAddrMaskL3 IPv4 destination address filter mask.rw IpAddress .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.5 |
aclL3Ip4DscpCheckL3 IPv4 DSCP/ToS check or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.6 |
aclL3Ip4TosCheckL3 IPv4 DSCP/ToS check or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.7 |
aclL3Ip4ProtocolIndicate the IP Protocol to be care in this profile.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.8 |
aclL3Ip4ProtocolMaskL3 IPv4 protocol id mask.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.9 |
aclL3Ip6SrcAddrMaskL3 IPv6 source address filter mask.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.10 |
aclL3Ip6DstAddrMaskL3 IPv6 destination address filter mask.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.11 |
aclL3Ip6TrafficClassCheckConfigure to decide whether to do ip6 Traffic Class checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.12 |
aclL3IcmpTypeCheckConfigure to decide whether to do icmp type checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.13 |
aclL3IcmpCodeCheckConfigure to decide whether to do icmp code checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.14 |
aclL3IgmpTypeCheckConfigure to decide whether to do igmp type checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.15 |
aclL3SrcPortMaskSource port filter mask.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.16 |
aclL3DstPortMaskDestination port filter mask.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.17 |
aclL3TcpFlagCheckConfigure to decide whether to do tcp flag checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.18 |
aclL3ProfileStatusThis object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if there is no configuration conflict.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.1.2.1.19 |
sysAclRule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.103.2 |
aclL2RuleTableA Table contain the L2 acl rule infomation. SEQUENCE OF AclL2RuleEntry .1.3.6.1.4.1.171.10.134.2.1.103.2.1 |
aclL2RuleEntryEntries of the aclL2RuleTable AclL2RuleEntry .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1 |
aclL2RuleProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.1 |
aclL2RuleAccessIDThe ACL rule access ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.2 |
aclL2VlanIdVlan id to be filter, 0 means not care.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.3 |
aclL2SrcMacL2 source mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.4 |
aclL2DstMacL2 destination mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.5 |
aclL28021pEthernet header 802.1p value to be filter, -1 means not care.rw Integer32 (-1..7) .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.6 |
aclL2EtherTypeEthernet type value to be filter, 0 means not care.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.7 |
aclL2InPortListPacket from which ports that this rule apply on.rw PortList .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.8 |
aclL2ActionAction for a packet that hit this rule.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.9 |
aclL2RateLimitRate limit value for the packet hit.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.10 |
aclL2ReplaceDSCPReplace the DSCP value configured. -1 means not care.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.11 |
aclL2RuleStatusoperation of rule actionrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.2.1.1.12 |
aclL3RuleTableA Table contain the L3 IPv4 acl rule infomation. SEQUENCE OF AclL3RuleEntry .1.3.6.1.4.1.171.10.134.2.1.103.2.2 |
aclL3RuleEntryEntries of the acL3RuleTable AclL3RuleEntry .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1 |
aclL3RuleProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.1 |
aclL3RuleAccessIDThe ACL rule access ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.2 |
aclL3IP4SrcAddripv4 source address to filterrw IpAddress .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.3 |
aclL3IP4DstAddripv4 destination address to filterrw IpAddress .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.4 |
aclL3IP4DSCPipv4 dscp value to filter, -1 means do not care.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.5 |
aclL3IP4ToSipv4 tos value to filter, -1 means do not care.rw Integer32 (-1..7) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.6 |
aclL3IP4Protocolipv4 protocol value to filter, 255 means do not care.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.7 |
aclL3IP6SrcAddripv6 source address to filterrw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.8 |
aclL3IP6DstAddripv6 destination address to filterrw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.9 |
aclL3Ip6TrafficClassipv6 traffic class to filterrw INTEGER (-1..255) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.10 |
aclL3IcmpTypethe icmp type value to filterrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.11 |
aclL3IcmpCodethe icmp code value to filterrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.12 |
aclL3IgmpTypethe igmp type value to filterrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.13 |
aclL3SrcPortthe source port to filterrw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.14 |
aclL3DstPortthe destination port to filterrw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.15 |
aclL3TcpFlagURGcheck tcp urg flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.16 |
aclL3TcpFlagACKcheck tcp ack flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.17 |
aclL3TcpFlagPSHcheck tcp psh flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.18 |
aclL3TcpFlagRSTcheck tcp rst flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.19 |
aclL3TcpFlagSYNcheck tcp syn flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.20 |
aclL3TcpFlagFINcheck tco fin flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.21 |
aclL3InPortListPacket from which ports that this rule apply on.rw PortList .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.22 |
aclL3ActionAction for a packet that hit this rule.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.23 |
aclL3RateLimitRate limit value for the packet hit.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.24 |
aclL3ReplaceDSCPreplace dscp value to configured, -1 means not care.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.25 |
aclL3RuleStatusoperation of rule action.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.103.2.2.1.26 |
sysAclStatistic OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.103.3 |
aclTotalProfileTotal profile entry countro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.3.1 |
aclUsedProfileProfile entry number that in usero Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.3.2 |
aclTotalRuleTotal rule entry countro Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.3.3 |
aclUsedRuleRule entry number that in usero Integer32 .1.3.6.1.4.1.171.10.134.2.1.103.3.4 |
companyCPUACL OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.104 |
sysCpuAclProfile OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.104.1 |
cpuAclL2ProfileTableA Table contain the L2 acl profile infomation. SEQUENCE OF CpuAclL2ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.104.1.1 |
cpuAclL2ProfileEntryEntries of the cpuAclL2ProfileTable CpuAclL2ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1 |
cpuAclL2ProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.1 |
cpuAclL2RuleCountRule count in this profile.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.2 |
cpuAclL2SrcMacMaskL2 source mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.3 |
cpuAclL2DstMacMaskL2 destination mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.4 |
cpuAclL28021pCheckConfigure to decide whether to do 802.1p field check.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.5 |
cpuAclL2VlanIdCheckConfigure to decide whether to do vlan id field check.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.6 |
cpuAclL2EtherTypeCheckConfigure to decide whether to do ether type checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.7 |
cpuAclL2ProfileStatusThis object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if there is no configuration conflict.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.1.1.1.8 |
cpuAclL3ProfileTableA Table contain the L3 IPv4 acl profile infomation. SEQUENCE OF CpuAclL3ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.104.1.2 |
cpuAclL3ProfileEntryEntries of the aclIpv4ProfileTable CpuAclL3ProfileEntry .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1 |
cpuAclL3ProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.1 |
cpuAclL3RuleCountRule count in this profile.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.2 |
cpuAclL3ProfileTypeCurrent profile type, valid type is ipv4 and ipv6rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.3 |
cpuAclL3Ip4SrcAddrMaskL3 IPv4 source address filter mask.rw IpAddress .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.4 |
cpuAclL3Ip4DstAddrMaskL3 IPv4 destination address filter mask.rw IpAddress .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.5 |
cpuAclL3Ip4DscpCheckL3 IPv4 DSCP/ToS check or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.6 |
cpuAclL3Ip4ProtocolIndicate the IP Protocol to be care in this profile.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.7 |
cpuAclL3Ip4ProtocolMaskL3 IPv4 protocol id mask.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.8 |
cpuAclL3Ip4IcmpTypeCheckConfigure to decide whether to do icmp type checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.9 |
cpuAclL3Ip4IcmpCodeCheckConfigure to decide whether to do icmp code checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.10 |
cpuAclL3Ip4IgmpTypeCheckConfigure to decide whether to do igmp type checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.11 |
cpuAclL3Ip4SrcPortMaskSource port filter mask.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.12 |
cpuAclL3Ip4DstPortMaskDestination port filter mask.rw OCTET STRING .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.13 |
cpuAclL3Ip4TcpFlagCheckConfigure to decide whether to do tcp flag checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.14 |
cpuAclL3Ip6SrcAddrMaskL3 IPv6 source address filter mask.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.15 |
cpuAclL3Ip6DstAddrMaskL3 IPv6 destination address filter mask.rw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.16 |
cpuAclL3Ip6TrafficClassCheckConfigure to decide whether to do ip6 Traffic Class checkrw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.17 |
cpuAclL3ProfileStatusThis object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if there is no configuration conflict.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.1.2.1.18 |
sysCpuAclRule OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.104.2 |
cpuAclL2RuleTableA Table contain the L2 acl rule infomation. SEQUENCE OF CpuAclL2RuleEntry .1.3.6.1.4.1.171.10.134.2.1.104.2.1 |
cpuAclL2RuleEntryEntries of the cpuAclL2RuleTable CpuAclL2RuleEntry .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1 |
cpuAclL2RuleProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.1 |
cpuAclL2RuleAccessIDThe ACL rule access ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.2 |
cpuAclL2VlanIdVlan id to be filter, 0 means not care.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.3 |
cpuAclL2SrcMacL2 source mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.4 |
cpuAclL2DstMacL2 destination mac address filter mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.5 |
cpuAclL28021pEthernet header 802.1p value to be filter, 0 means not care.rw Integer32 (-1..7) .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.6 |
cpuAclL2EtherTypeEthernet type value to be filter, 0 means not care.rw Unsigned32 .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.7 |
cpuAclL2InPortListPacket from which ports that this rule apply on.rw PortList .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.8 |
cpuAclL2ActionAction for a packet that hit this rule.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.9 |
cpuAclL2RuleStatusoperation of rule actionrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.2.1.1.10 |
cpuAclL3RuleTableA Table contain the L3 IPv4 acl rule infomation. SEQUENCE OF CpuAclL3RuleEntry .1.3.6.1.4.1.171.10.134.2.1.104.2.2 |
cpuAclL3RuleEntryEntries of the acL3RuleTable CpuAclL3RuleEntry .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1 |
cpuAclL3RuleProfileIDThe ACL Profile ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.1 |
cpuAclL3RuleAccessIDThe ACL rule access ID.ro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.2 |
cpuAclL3IP4SrcAddripv4 source address to filterrw IpAddress .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.3 |
cpuAclL3IP4DstAddripv4 destination address to filterrw IpAddress .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.4 |
cpuAclL3IP4DSCPipv4 dscp value to filter, -1 means do not care.rw Integer32 (-1..63) .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.5 |
cpuAclL3IP4Protocolipv4 protocol value to filter, 255 means do not care.rw Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.6 |
cpuAclL3IP4IcmpTypethe icmp type value to filterrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.7 |
cpuAclL3IP4IcmpCodethe icmp code value to filterrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.8 |
cpuAclL3IP4IgmpTypethe igmp type value to filterrw Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.9 |
cpuAclL3IP4SrcPortthe source port to filterrw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.10 |
cpuAclL3IP4DstPortthe destination port to filterrw Integer32 (-1..65535) .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.11 |
cpuAclL3IP4TcpFlagURGcheck tcp urg flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.12 |
cpuAclL3IP4TcpFlagACKcheck tcp ack flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.13 |
cpuAclL3IP4TcpFlagPSHcheck tcp psh flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.14 |
cpuAclL3IP4TcpFlagRSTcheck tcp rst flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.15 |
cpuAclL3IP4TcpFlagSYNcheck tcp syn flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.16 |
cpuAclL3IP4TcpFlagFINcheck tco fin flag set or not.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.17 |
cpuAclL3InPortListPacket from which ports that this rule apply on.rw PortList .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.18 |
cpuAclL3ActionAction for a packet that hit this rule.rw Enumeration .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.19 |
cpuAclL3IP6SrcAddripv6 source address to filterrw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.20 |
cpuAclL3IP6DstAddripv6 destination address to filterrw Ipv6Address .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.21 |
cpuAclL3Ip6TrafficClassipv6 traffic class to filterrw INTEGER (-1..255) .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.22 |
cpuAclL3RuleStatusoperation of rule actionrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.10.134.2.1.104.2.2.1.23 |
sysCpuAclStatistic OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.134.2.1.104.3 |
cpuAclTotalProfileTotal profile entry countro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.3.1 |
cpuAclUsedProfileProfile entry number that in usero Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.3.2 |
cpuAclTotalRuleTotal rule entry countro Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.3.3 |
cpuAclUsedRuleRule entry number that in usero Integer32 .1.3.6.1.4.1.171.10.134.2.1.104.3.4 |