Home/Catalog/DELL-NETWORKING-SYSTEM-COMPONENT-MIB

DELL-NETWORKING-SYSTEM-COMPONENT-MIB

AI MIB Summary

The DELL-NETWORKING-SYSTEM-COMPONENT-MIB monitors CAM table utilization metrics on Dell Networking OS line cards, specifically tracking overall system usage and ingress/egress counts for L2, L3, and L3Ext tables on Broadcom S-series platforms.

Dell Networking OS System component MIB. Dell Networking OS System component allow user to view the SW information of a component in the system. Currently, the available component information that are avaibale are 1) CAM Entries on linecard - Overall system CAM usage table - L2 Ingress or Egress CAM Usage - L3 Ingress or Egress CAM Usage - L3Ext Table CAM Usage (Specific to S-series L3 tables-Broadcom pltforms)

Main OID:

dellNetSysComponentMib.1.3.6.1.4.1.6027.3.7

Objects

Active

Status

Dependencies

Imported Objects

Objects

60 total

Object Name	Syntax	OID
dellNetSysComponentMibDell Networking OS System component MIB. Dell Networking OS System component allow user to view the SW information of a component in the system. Currently, the available component information that are avaibale are 1) CAM Entries on linecard - Overall system CAM usage table - L2 Ingress or Egress CAM Usage - L3 Ingress or Egress CAM Usage - L3Ext Table CAM Usage (Specific to S-series L3 tables-Broadcom pltforms) MODULE-IDENTITY `.1.3.6.1.4.1.6027.3.7`	MODULE-IDENTITY	`.1.3.6.1.4.1.6027.3.7`
dellNetSysComponentObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.6027.3.7.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6027.3.7.1`
dellNetCamEntries OBJECT IDENTIFIER `.1.3.6.1.4.1.6027.3.7.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6027.3.7.1.1`
camUsageTableA table of general CAM usages table. SEQUENCE OF CamUsageEntry `.1.3.6.1.4.1.6027.3.7.1.1.1`	SEQUENCE OF CamUsageEntry	`.1.3.6.1.4.1.6027.3.7.1.1.1`
camUsageEntryA table of CAM usage table. The table show the different partition of CAM CamUsageEntry `.1.3.6.1.4.1.6027.3.7.1.1.1.1`	CamUsageEntry	`.1.3.6.1.4.1.6027.3.7.1.1.1.1`
camUsageSlotThe slot number of linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.1.1.1`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.1.1.1`
camUsagePipeNumThe port pipe number on the linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.1.1.2`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.1.1.2`
camUsagePartIdThe partition id of the CAM on the line card. DellNetCamPartitionType (DELL-NETWORKING-TC) `.1.3.6.1.4.1.6027.3.7.1.1.1.1.3`	DellNetCamPartitionType (DELL-NETWORKING-TC)	`.1.3.6.1.4.1.6027.3.7.1.1.1.1.3`
camUsagePartDescThe description of the CAM partition id.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.6027.3.7.1.1.1.1.4`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.6027.3.7.1.1.1.1.4`
camUsageTotalThe total cam size allocated to this CAM partitionro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.1.1.5`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.1.1.5`
camUsageUsedThe total cam used or configured to this CAM partitionro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.1.1.6`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.1.1.6`
camUsageL2TableA table of Layer 2 or switch layer CAM usages table. SEQUENCE OF CamUsageL2Entry `.1.3.6.1.4.1.6027.3.7.1.1.2`	SEQUENCE OF CamUsageL2Entry	`.1.3.6.1.4.1.6027.3.7.1.1.2`
camUsageL2EntryA table of Layer 2 (switch layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress. CamUsageL2Entry `.1.3.6.1.4.1.6027.3.7.1.1.2.1`	CamUsageL2Entry	`.1.3.6.1.4.1.6027.3.7.1.1.2.1`
camUsageL2SlotThe slot number of linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.1`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.1`
camUsageL2PipeIdThe port pipe number on the linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.2`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.2`
camUsageL2IngAclTotalThe total cam size allocated to layer 2 ingress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.3`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.3`
camUsageL2IngAclUsedThe total cam used or configured in layer 2 ingress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.4`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.4`
camUsageL2IngFibTotalThe total cam size allocated to layer 2 ingress FIBro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.7`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.7`
camUsageL2IngFibUsedThe total cam used or configured in layer 2 ingress FIBro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.8`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.8`
camUsageL2EgrAclTotalThe total cam size allocated to layer 2 Egress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.9`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.9`
camUsageL2EgrAclUsedThe total cam used or configured in layer 2 Egress Aclro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.2.1.10`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.2.1.10`
camUsageL3TableA table of Layer 3 or router layer CAM usages table. SEQUENCE OF CamUsageL3Entry `.1.3.6.1.4.1.6027.3.7.1.1.3`	SEQUENCE OF CamUsageL3Entry	`.1.3.6.1.4.1.6027.3.7.1.1.3`
camUsageL3EntryA table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress. CamUsageL3Entry `.1.3.6.1.4.1.6027.3.7.1.1.3.1`	CamUsageL3Entry	`.1.3.6.1.4.1.6027.3.7.1.1.3.1`
camUsageL3SlotThe slot number of linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.1`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.1`
camUsageL3PipeIdThe port pipe number on the linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.2`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.2`
camUsageL3IngFibTotalThe total cam size allocated to layer 3 ingress FIBro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.3`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.3`
camUsageL3IngFibUsedThe total cam used or configured in layer 3 ingress FIBro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.4`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.4`
camUsageL3IngSysFlowTotalThe total cam size allocated to layer 3 ingress system flowro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.5`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.5`
camUsageL3IngSysFlowUsedThe total cam used or configured in layer 3 ingress system flowro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.6`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.6`
camUsageL3IngTrcListTotalThe total cam size allocated to layer 3 ingress trace listro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.7`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.7`
camUsageL3IngTrcListUsedThe total cam used or configured in layer 3 ingress trace listro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.8`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.8`
camUsageL3IngMcastFibTotalThe total cam size allocated to layer 3 ingress multicast FIBro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.9`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.9`
camUsageL3IngMcastFibUsedThe total cam used or configured in layer 3 ingress multicast FIBro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.10`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.10`
camUsageL3IngQosTotalThe total cam size allocated to layer 3 ingress QOSro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.11`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.11`
camUsageL3IngQosUsedThe total cam used or configured in layer 3 ingress QOSro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.12`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.12`
camUsageL3IngPbrTotalThe total cam size allocated to layer 3 ingress PBRro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.13`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.13`
camUsageL3IngPbrUsedThe total cam used or configured in layer 3 ingress QOSro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.14`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.14`
camUsageL3IngAclTotalThe total cam size allocated to layer 3 ingress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.15`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.15`
camUsageL3IngAclUsedThe total cam used or configured in layer 3 ingress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.16`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.16`
camUsageL3EgrAclTotalThe total cam size allocated to layer 3 egress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.17`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.17`
camUsageL3EgrAclUsedThe total cam used or configured in layer 3 egress ACLro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.3.1.18`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.3.1.18`
camUsageL3ExtTableA table of Layer 3 or router layer CAM usages table based on BCM pltform. SEQUENCE OF CamUsageL3ExtEntry `.1.3.6.1.4.1.6027.3.7.1.1.4`	SEQUENCE OF CamUsageL3ExtEntry	`.1.3.6.1.4.1.6027.3.7.1.1.4`
camUsageL3ExtEntryA table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM/Table based on BCM architecture. CamUsageL3ExtEntry `.1.3.6.1.4.1.6027.3.7.1.1.4.1`	CamUsageL3ExtEntry	`.1.3.6.1.4.1.6027.3.7.1.1.4.1`
camUsageL3ExtSlotThe slot number of linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.4.1.1`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.4.1.1`
camUsageL3ExtPipeIdThe port pipe number on the linecard where the CAM is located Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.4.1.2`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.4.1.2`
camUsageL3ExtHostTotalThe total cam size allocated to layer 3 Host table. Host table is shared by IPv4,IPv6 unicast host route entries (ARP) and IPv4,IPv6 Multicast entries. The usage reflects sum of all these entriesro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.4.1.3`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.4.1.3`
camUsageL3ExtHostUsedThe total cam used in layer 3 Host table. As Host table is shared by IPv4,Ipv6 unicast host route entries and IPv4,IPv6 Multicast entries. The usage reflects sum of all these entries.ro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.4.1.4`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.4.1.4`
camUsageL3ExtLPMTotalThe total cam size allocated to layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,IPv6 unicast route entries.ro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.4.1.5`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.4.1.5`
camUsageL3ExtLPMUsedThe total cam size used in layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,Ipv6 unicast route entries.The usage reflects sum of IPv4 and v6 unicast route entries.ro Integer32 `.1.3.6.1.4.1.6027.3.7.1.1.4.1.6`	Integer32	`.1.3.6.1.4.1.6027.3.7.1.1.4.1.6`
dellNetSysComponentTrap OBJECT IDENTIFIER `.1.3.6.1.4.1.6027.3.7.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6027.3.7.1.2`
sysCompAlarmMibNotifications OBJECT IDENTIFIER `.1.3.6.1.4.1.6027.3.7.1.2.0`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6027.3.7.1.2.0`
camUsageThresholdExceedThe agent generate this trap when the cam usage for a partition is exceeded. NOTIFICATION-TYPE `.1.3.6.1.4.1.6027.3.7.1.2.0.1`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.6027.3.7.1.2.0.1`
camIsFullThe agent generate this trap when the cam is fully used. NOTIFICATION-TYPE `.1.3.6.1.4.1.6027.3.7.1.2.0.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.6027.3.7.1.2.0.2`
camAuditErrorThe agent generate this trap when a cam entry mismatches with the Software entry. NOTIFICATION-TYPE `.1.3.6.1.4.1.6027.3.7.1.2.0.3`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.6027.3.7.1.2.0.3`
sysCompAlarmVariable OBJECT IDENTIFIER `.1.3.6.1.4.1.6027.3.7.1.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.6027.3.7.1.2.1`
sysCompAlarmLevelthe message warning levelro INTEGER `.1.3.6.1.4.1.6027.3.7.1.2.1.1`	INTEGER	`.1.3.6.1.4.1.6027.3.7.1.2.1.1`
sysCompAlarmVarStringAn generic string value in the TRAP objectro OCTET STRING `.1.3.6.1.4.1.6027.3.7.1.2.1.2`	OCTET STRING	`.1.3.6.1.4.1.6027.3.7.1.2.1.2`
sysCompSlotIdThe associated LineCard in the TRAP objectro INTEGER `.1.3.6.1.4.1.6027.3.7.1.2.1.3`	INTEGER	`.1.3.6.1.4.1.6027.3.7.1.2.1.3`
sysCompPortPipeThe associated port pipe in the TRAP objectro INTEGER `.1.3.6.1.4.1.6027.3.7.1.2.1.4`	INTEGER	`.1.3.6.1.4.1.6027.3.7.1.2.1.4`
sysCompCamPartIdThe associated CAM partion name in the TRAP objectro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.6027.3.7.1.2.1.5`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.6027.3.7.1.2.1.5`