F10-CHASSIS-MIB
AI MIB Summary
The F10-CHASSIS-MIB enables monitoring and management of physical chassis components, including power supplies, fans, temperature sensors, and system status indicators, within Dell Networking OS environments. This module provides the necessary OID definitions to track hardware health and environmental metrics for Dell F10 series switches.
Dell Networking OS Chassis MIB.
Main OID:
f10ChassisMib.1.3.6.1.4.1.6027.3.1
196
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
196 total| Object Name |
|---|
f10ChassisMibDell Networking OS Chassis MIB. MODULE-IDENTITY .1.3.6.1.4.1.6027.3.1 |
f10ChassisMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1 |
chObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.1 |
chTypeThe Dell Networking OS type of chassis.ro F10ChassisType (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.1.1 |
chSerialNumberThe Dell Networking OS chassis's serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.1.2 |
chVendorIdThe Dell Networking OS manufacturer's id.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.1.3 |
chMfgDateThe date the chassis was manufactured.ro F10MfgDate (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.1.4 |
chEcLevelThe EC Level of the Dell Networking OS chassis.rodeprecated Integer32 .1.3.6.1.4.1.6027.3.1.1.1.5 |
chNumFanTraysThe total number of fan trays on the chassis.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.1.6 |
chNumPowerSuppliesThe total number of power supply in the Dell Networking OS chassisro Integer32 .1.3.6.1.4.1.6027.3.1.1.1.7 |
chNumSlotsThe total number of physical slots in the chassis for line cards and route process module (rpm ) cards.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.1.8 |
chNumSfmSlotsThe total number of switch fabric modules (sfm) slots in the chassis.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.1.9 |
chNumAirFiltersThe total number of air intake filters in the chassis.rodeprecated Integer32 .1.3.6.1.4.1.6027.3.1.1.1.10 |
chSlot1to16This object has been obsoleted and will not be supported by future Dell Networking OS Chassis. The information here is for reference only. This variable indicates the slot states. Each slot occupies a bit. The value 1 indicates slot is in used and 0 indicates the slot is empty. The placement of line cards and rpm cards in a E1200 chassis are as follows : ( physical slot numbers ) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 | | | | ------------- ------------------- | | | | line cards | | line card | | | + ----> RPM card +-------> RPM card The most significant bit is slot 1 and the least significant bit is slot 16. The placement of line cards and rpm cards in a E600 chassis are as follows : ( physical slot numbers ) 1 2 3 4 5 6 7 8 9 | | ------------- | | | line cards | | | | | + ----> RPM card +-------> RPM card The most significant bit is slot 1 and the least significant bit is slot 9.ro F10SlotState (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.1.11 |
chCountryCodeThe Dell Networking OS manufacturer's y code.ro OCTET STRING .1.3.6.1.4.1.6027.3.1.1.1.12 |
chPartNumThe Dell Networking OS manufacturer's part number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.1.13 |
chProductRevThe Dell Networking OS manufacturer's product revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.1.14 |
chProductOrderThe Dell Networking OS product order numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.1.15 |
chChassisModeThe Dell Networking OS chassis mode of this chassis.ro F10ChassisMode (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.1.16 |
chSysObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.2 |
chSysPowerSupplyTableA list of power supply resident in this chassis. SEQUENCE OF ChSysPowerSupplyEntry .1.3.6.1.4.1.6027.3.1.1.2.1 |
chSysPowerSupplyEntryA power supply entry containing objects for a particular power supply. ChSysPowerSupplyEntry .1.3.6.1.4.1.6027.3.1.1.2.1.1 |
chSysPowerSupplyIndexThe unique index of the power supply.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.1.1.1 |
chSysPowerSupplyOperStatusThe status of the power supply.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.1.1.2 |
chSysPowerSupplyTypeThe type of the power supply.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.1.1.3 |
chSysFanTrayTableA list of fan tray resident in this chassis. SEQUENCE OF ChSysFanTrayEntry .1.3.6.1.4.1.6027.3.1.1.2.2 |
chSysFanTrayEntryA fan entry containing objects for a particular fan tray. ChSysFanTrayEntry .1.3.6.1.4.1.6027.3.1.1.2.2.1 |
chSysFanTrayIndexThe unique index of the fan tray.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.2.1.1 |
chSysFanTrayOperStatusThe status of the fan tray.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.2.1.2 |
chSysCardTableA list of cards resident in the chassis. The placement of line cards and rpm cards in the E1200 chassis are as follows : ( physical slot numbers ) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ( Dell Networking OS card number ) 0 1 2 3 4 5 6 0 1 7 8 9 10 11 12 13 | | | | ------------- ------------------- | | | | line card | | line card | | | + ----> RPM card +-------> RPM card The placement of line cards and rpm cards in the E600 chassis are as follows : ( physical slot numbers ) 1 2 3 4 5 6 7 8 9 ( Dell Networking OS card number ) 0 1 2 3 4 5 6 0 1 | | ------------- | | | line card | | | | | + ----> RPM card +-------> RPM card The placement of line cards and rpm cards in the E300 chassis are as follows : ( physical slot numbers ) 1 2 3 4 5 6 7 8 ( Dell Networking OS card number ) 0 1 0 1 2 3 4 5 | | ----------- | | | | | line card | | | + ----> RPM card +-------> RPM card SEQUENCE OF ChSysCardEntry .1.3.6.1.4.1.6027.3.1.1.2.3 |
chSysCardEntryA list of cards entries containing information for line card or rpm card. ChSysCardEntry .1.3.6.1.4.1.6027.3.1.1.2.3.1 |
chSysCardSlotIndexA unique index for each slot within the chassis. This value is the physical slot number and the value is determined by the chassis slot location where the card is inserted. Valid entries are 1 to the value of chNumSlots.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.1 |
chSysCardTypeType of card in this slot. The type of cards are defined in F10SystemCardType.ro F10SystemCardType (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.2 |
chSysCardNumberThis is the card number assigned to the line cards and the RPM cards in the chassis. The line cards number are from 0 to 13 and the RPM are from 0 to 1.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.3 |
chSysCardSerialNumberThe serial number of the card in this slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.4 |
chSysCardVendorIdThe vendor id that manufactured the card in this slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.5 |
chSysCardMfgDateThe date the card is manufactured.ro F10MfgDate (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.6 |
chSysCardEcLevelThe EC Level of the card.rodeprecated Integer32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.7 |
chSysCardUpperTempThe temperature of the card. If the temperature is too high, alarm chAlarmCardTemperatureHigh will be sent.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.8 |
chSysCardLowerTempThis temperature field is not used at the moment.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.9 |
chSysCardNumProcessorsThe number of Processors in the card. The number of processors are depended on the type of card plugged into the slot.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.10 |
chSysCardNumPhyPortsThe number of physical ports in each card. The card can have one or more ports depending on the type of cards. If it is a logical card, the value set to zero.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.11 |
chSysCardNumLgcPortsThe number of logical ports in each card. The card can have one or more ports depending on the type of cards. If it is a physical card, the value set to zero.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.12 |
chSysCardUpTimeThe SysUpTime for this slot. This variable indicates the time since the card last reset.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6027.3.1.1.2.3.1.13 |
chSysCardAdminStatusThe admin status of the card. The valid status are as followed: 'up' - card present and ready. 'down' - card is not ready.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.3.1.14 |
chSysCardOperStatusThe current operational state of the card.ro F10CardOperStatus (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.15 |
chSysCardFaultStatusThe Fault status of the card. The valid status are as followed: 'on' - the system fault light is on. 'off' - the system fault light is off.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.3.1.16 |
chSysCardLogStreamReserved field. This fields should return null.ro OCTET STRING .1.3.6.1.4.1.6027.3.1.1.2.3.1.17 |
chSysCardCountryCodeThe card manufacturer's country codero OCTET STRING .1.3.6.1.4.1.6027.3.1.1.2.3.1.18 |
chSysCardPartNumThe card part numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.19 |
chSysCardProductRevThe card manufacturer's product revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.20 |
chSysCardProdOrderThe F10 product order numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.3.1.21 |
chSysCardParityPhantomErrorCounters indicating Transient Phantom Parity Errors on this card. Applied to Linecards only.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.22 |
chSysCardParityRecoverableErrorCounters indicating Transient Recoverable Parity Errors on this card. Applied to Linecards only.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.23 |
chSysCardParityNonrecovrableErrorCounters indicating Transient Non-Recoverable Parity Errors on this card. Applied to Linecards only.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.3.1.24 |
chSysPortTableA list of ports in a slot. SEQUENCE OF ChSysPortEntry .1.3.6.1.4.1.6027.3.1.1.2.4 |
chSysPortEntryA port entry containing objects for a particular slot. ChSysPortEntry .1.3.6.1.4.1.6027.3.1.1.2.4.1 |
chSysPortSlotIndexA unique index for each slot within the chassis. This value is determined by the chassis slot number where the card is inserted. Valid entries are 1 to the value of chNumSlotsro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.4.1.1 |
chSysPortIndexA unique index for each slot within the card. This value is determined by the variable chSysSlotNumPorts. This value can also be determined by the chSysCardType. Valid entries are 1 to the value of number of ports availabledro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.4.1.2 |
chSysPortTypeThe type of port in the card.ro F10SystemPortType (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.4.1.3 |
chSysPortAdminStatusThe admin status of the card. The port admin status is Up if the user has configured it to be up otherwise, the admin status is Down.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.4.1.4 |
chSysPortOperStatusThe operational status provides further condition of the card. If the chSysPortAdminStatus is 'up', the valid state is 'ready' - the card is present and ready and the chSysPortAdminStatus status is 'up'. 'portDown' - the port is down or not enabled. 'portProblem' - port hardware problems. 'cardProblem' - not used. Same as cardDown. 'cardDown' - the card is downed. 'notPresent' - the card is not present.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.4.1.5 |
chSysPortIfIndexThe index of ifIndex in the Interface Mib. This index can link to the ifEntry to get this interface/port informationro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.4.1.6 |
chSysXfpRecvPowerThe power signal strength (dB) received for interface on 10G linecard.ro F10HundredthdB UNITS "dB" .1.3.6.1.4.1.6027.3.1.1.2.4.1.7 |
chSysProcessorTableA list of Processors resident in this slot. SEQUENCE OF ChSysProcessorEntry .1.3.6.1.4.1.6027.3.1.1.2.6 |
chSysProcessorEntryA list of Processor entries. ChSysProcessorEntry .1.3.6.1.4.1.6027.3.1.1.2.6.1 |
chSysProcessorSlotIndexA unique index for each slot within the chassis. This value is determined by the chassis slot number where the card is inserted. Valid entries are 1 to the value of chNumSlotsro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.6.1.1 |
chSysProcessorIndexA unique index for each Processor within the card. This value is determined by the variable chSysSlotNumProcessors. the valid entries are 1 to the value of number of processorsro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.6.1.2 |
chSysProcessorModuleThe type of module running on the Processor.ro F10ProcessorModuleType (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.6.1.3 |
chSysProcessorUpTimeThe SysUpTime for this Processor.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6027.3.1.1.2.6.1.4 |
chSysProcessorNvramSizeTotal Non-volatile RAM in Kbytes.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.6.1.5 |
chSysProcessorMemSizeThe size of the RAM in Mb.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.6.1.6 |
chSysProcessorLogStreamReserved field. Currently, this field should return NULL.ro OCTET STRING .1.3.6.1.4.1.6027.3.1.1.2.6.1.7 |
chSysSwModuleTableA list of software version information in a processor. SEQUENCE OF ChSysSwModuleEntry .1.3.6.1.4.1.6027.3.1.1.2.7 |
chSysSwModuleEntryA software module entry containing version number information for a particular processor. ChSysSwModuleEntry .1.3.6.1.4.1.6027.3.1.1.2.7.1 |
chSysSwSlotIndexA unique index for each slot within the chassis. This value is determined by the chassis slot number where the card is inserted. Valid entries are 1 to the value of chNumSlotsro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.7.1.1 |
chSysSwProcessorIndexA unique index for each CPU within the card. This value is determined by the variable chSysSlotNumCPUs. This value can also be determined by the chSysSlotType. Valid entries are 1 to the value of number of cpuro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.7.1.2 |
chSysSwRuntimeImgVersionThis variable indicates the software module version that is currently running on the processor. The software release version is in the format as follow: <major version>.<minor version>.<minor version>...... '1.1' indicate major version of 1 and minor release of 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.7.1.3 |
chSysSwRuntimeImgDateThe release date of this software module.ro F10SwDate (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.7.1.4 |
chSysSwCurrentBootImgVersionThe software release version is in the format as follow: <major version>.<minor version>.<minor version>...... '1.1' indicate major version of 1 and minor release of 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.7.1.5 |
chSysSwCurrentBootImgDateThe release date of this software module If the CPU is reset, the software module running date (chSysSwModuleRunningDate) will change to this current date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.7.1.6 |
chSysSwCurrentBootImgStatusThe status of current boot image.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.7.1.7 |
chSysSwBackupBootImgVersionThe software release version is in the format as follow: <major version>.<minor version>.<minor version>...... '1.1' indicate major version of 1 and minor release of 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.7.1.8 |
chSysSwBackupBootImgDateThe backup boot image released date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.7.1.9 |
chSysSwBackupBootImgStatusThe status of the backup boot image.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.7.1.10 |
chSysSwNextRebootImageThe boot flash image selection. When the chassis is rebooted, this is the boot image to use.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.7.1.11 |
chSysSwCurrentBootImageThe current boot image. This is the boot image described by the chSysSwCurrentBootImgVersion, chSysSwCurrentBootImgDate, and chSysSwCurrentBootImgStatus objects.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.7.1.12 |
chSysSfmTableA list of Swicth Fabric Module in a slot. SEQUENCE OF ChSysSfmEntry .1.3.6.1.4.1.6027.3.1.1.2.8 |
chSysSfmEntryA SFM entry containing objects for a particular slot. ChSysSfmEntry .1.3.6.1.4.1.6027.3.1.1.2.8.1 |
chSysSfmIndexA unique index for each SFM within the chassis. The number of SFM slots can be determined with chNumSfmSlots.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.2.8.1.1 |
chSysSfmSerialNumberThe serial number of the SFM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.8.1.2 |
chSysSfmVendorIdThe vendor id that manufactured the SFM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.8.1.3 |
chSysSfmMfgDateThe date the SFM is manufactured.ro F10MfgDate (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.2.8.1.4 |
chSysSfmEcLevelThe EC Level of the SFM.rodeprecated Integer32 .1.3.6.1.4.1.6027.3.1.1.2.8.1.5 |
chSysSfmAdminStatusThe admin status of each SFM.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.8.1.6 |
chSysSfmOperStatusThe Operational status provides further condition of Switch Fabric Module card. If the chSysSfmAdminStatus is 'up', the valid state is 'active' - the card is present and ready and the chSysSfmAdminStatus status is 'up'. If the chSysCardOperStatus is 'down', the service states can be as followed: 'absent' - the card is not present. 'standby' - the card is in standby mode. 'incomp' - incompatible with current sfm switch mode.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.8.1.7 |
chSysSfmErrorStatusThe Operational status provides further condition of Switch Fabric Module card. If the chSysSfmAdminStatus is 'up', the valid state is 'ok' - the card is present and ready and the chSysSfmAdminStatus status is 'up'. If the chSysSfmAdminStatus is 'down', the error status can be as followed: 'not-available' - status not available. 'error' - the card is in error state.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.2.8.1.8 |
chSysSfmCountryCodeThe SFM manufacturer's country codero OCTET STRING .1.3.6.1.4.1.6027.3.1.1.2.8.1.9 |
chSysSfmPartNumThe SFM manufacturer's part numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.8.1.10 |
chSysSfmProductRevThe SFM manufacturer's product revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.8.1.11 |
chSysSfmProdOrderThe SFM product order number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.2.8.1.12 |
chSysSfmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.2.9 |
chSfmUtil5SecSFM utilization in percentage for last 5 Seconds.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.9.1 |
chSfmUtil1MinSFM utilization in percentage for last 1 minute.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.9.2 |
chSfmUtil5MinSFM utilization in percentage for last 5 minute.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.2.9.3 |
chRpmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.3 |
chRpmNumRpmsThe number of RPM installed in the chassis. There is always one primary RPM, but a secondary RPM can also be installed as backup.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.3.1 |
chRpmSlotNumberThe primary routing process module slot number. If the primary RPM is switched to secondary RPM, the slot number will be updated here.ro Integer32 .1.3.6.1.4.1.6027.3.1.1.3.2 |
chRpmUptimeSysUpTime of the last time the RPM is reset. Used the SysUpTime of the control processor as this variable.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6027.3.1.1.3.3 |
chRpmLastSwitchDateThe date and time when the Routing Process Module is switched.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6027.3.1.1.3.4 |
chRpmCOAlarmStatusThe Central Office (CO) Alarm on RPM card. The valid status are as followed: 'off' - CO Alarm light is off. 'on' - CO Alarm light is on. Please refer to Dell Networking OS Alarm document - Appendix C for the condition when this CO alarm is triggered.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.3.5 |
chRpmFlashStatusThe Compact Flash on RPM card. The valid status are as followed: 'absent' - external flash is not present. 'present' - external flash is present.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.3.6 |
chRpmUtilTableA table listing the cpu and memory utilization in master RPM. SEQUENCE OF ChRpmUtilEntry .1.3.6.1.4.1.6027.3.1.1.3.7 |
chRpmUtilEntryA row in each processor cpu and mmory utilization ChRpmUtilEntry .1.3.6.1.4.1.6027.3.1.1.3.7.1 |
chRpmCpuIndexA unique index for each Processor within the RPM. This value is determined by the variable chSysSlotNumProcessors. the valid entries are 1 to the value of number of processorsro Integer32 .1.3.6.1.4.1.6027.3.1.1.3.7.1.1 |
chRpmCpuTypeThe type of module running on the Processor.ro F10ProcessorModuleType (FORCE10-TC) .1.3.6.1.4.1.6027.3.1.1.3.7.1.2 |
chRpmCpuUtil5SecCPU utilization in percentage for last 5 seconds.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.3.7.1.3 |
chRpmCpuUtil1MinCPU utilization in percentage for last 1 minute.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.3.7.1.4 |
chRpmCpuUtil5MinCPU utilization in percentage for last 5 minutes.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.3.7.1.5 |
chRpmMemUsageUtilTotal RPM's memory usage in percentage.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.3.7.1.6 |
chRpmMajorAlarmStatusThe Major Alarm LED on the Primary RPM card.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.3.8 |
chRpmMinorAlarmStatusThe Minor Alarm LED on the Primary RPM card.ro Enumeration .1.3.6.1.4.1.6027.3.1.1.3.9 |
chAlarmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.4 |
chAlarmMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.4.0 |
chAlarmCardDownThe driver/agent generate this trap when a card operational status is down. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.1 |
chAlarmCardUpThe driver/agent generate this trap when a card operational status is up. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.2 |
chAlarmCardResetThe driver/agent generate this trap when a card is reset. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.3 |
chAlarmCardOfflineThe driver/agent generate this trap when a card is set to offline. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.4 |
chAlarmCardMismatchThe driver/agent generate this trap when a card is not the same as configured NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.5 |
chAlarmCardRemoveThe driver/agent generate this trap when a card is removed NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.6 |
chAlarmCardProblemThe driver/agent generate this trap when a card is indicated wht status card problem NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.7 |
chAlarmCutoffThis trap is generated if the alarm cut off button on RPM is pressed. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.8 |
chAlarmSfmUpThe driver/agent generate this trap when a SFM operational status is up. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.9 |
chAlarmSfmDownThe driver/agent generate this trap when a SFM operational status is down. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.10 |
chAlarmRpmUpThe primary RPM generate this trap when the primary RPM or the secondary RPM is up and running. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.11 |
chAlarmRpmDownThe primary RPM generate this trap when the secondary RPM is down, either by software reset or being physically removed from the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.12 |
chAlarmPowersupplyDownThe driver/agent generate this trap when a power supply is not operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.13 |
chAlarmMinorTemperatureHighThe driver/agent generate this trap when the chassis's temperature exceed the minor threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.14 |
chAlarmMajorTemperatureHighThe driver/agent generate this trap when the chassis's temperature exceede the major threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.15 |
chAlarmFanTrayDownThe driver/agent generate this trap when a fan tray is missing or down. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.16 |
chAlarmPowersupplyClearThe driver/agent generate this trap when a power supply is now operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.17 |
chAlarmMinorTemperatureClearThe driver/agent generate this trap when the chassis's temperature within the minor threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.18 |
chAlarmMajorTemperatureClearThe driver/agent generate this trap when the chassis's temperature within the major threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.19 |
chAlarmFanTrayClearThe driver/agent generate this trap when a fan tray is now operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.20 |
chAlarmMinorFanBadClearThe driver/agent generate this trap when a minor fan tray that was bad is now operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.21 |
chAlarmMajorSfmDownThe driver/agent generate this trap when a majority of SFM are down. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.22 |
chAlarmMajorSfmDownClrThe driver/agent generate this trap when a majority of SFM were down are now operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.23 |
chAlarmMinorSfmDownThe driver/agent generate this trap when a majority of SFM are down. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.24 |
chAlarmMinorSfmDownClrThe driver/agent generate this trap when a majority of SFM were down are now operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.25 |
chAlarmTaskSuspendThe system generate this trap when a a task is suspended. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.26 |
chAlarmTaskTermThe system generate this trap when a a task is terminated. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.27 |
chAlarmVrrpGoMasterThe VRRP generate this trap when it become a backup NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.28 |
chAlarmVrrpGiveupMasterThe VRRP generate this trap when it is no longer the master and has entered non-operational state. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.29 |
chAlarmBgpEstbBGP task neighbour established. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.30 |
chAlarmBgpXsitionBGP task is in transition. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.31 |
chAlarmMajorPSThe agent generate this trap when a power supply major alarm is issued. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.32 |
chAlarmMajorPSClrThe agent generate this trap when a power supply major alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.33 |
chAlarmMinorPSThe agent generate this trap when a power supply minor alarm is issued. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.34 |
chAlarmMinorPSClrThe agent generate this trap when a power supply minor alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.35 |
chAlarmMinorFanBadThe agent generate this trap when fan is bad. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.36 |
chAlarmExdCpuThresholdThe agent generate this trap when cpu utilization excceded 80%. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.37 |
chAlarmClrCpuThresholdThe agent generate this trap when cpu utilization falls below threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.38 |
chAlarmExdMemThresholdThe agent generate this trap when memory utilization excceded 92%. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.39 |
chAlarmClrMemThresholdThe agent generate this trap when memory utilization falls below threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.40 |
chAlarmMacStationMoveThe agent generate this trap when a MAC station move exceed the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.41 |
chAlarmSfmAddThe agent generate this trap when a SFM is added to the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.42 |
chAlarmSfmRemoveThe agent generate this trap when a SFM is removed from the chassis. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.43 |
chAlarmRpmPrimaryThe agent generate this trap when a standby RPM become Primary RPM after fail-over. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.44 |
chSnmpIpAclDenyThe agent generate this trap when SNMP Agent deny a SNMP request based on the IP ACL rules. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.45 |
chAlarmSRAMParityErrorDetectThe agent generate this trap when a linecard detects SRAM parity error and then tries to recover but can't recover that section. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.47 |
chAlarmAcDcMixedPowerSupplyDetectThe agent generate this trap when a system detects AC and DC mixed power supply. Applied to C-series only. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.48 |
chAlarmCardVersionMismatchThe driver/agent generate this trap when a card is not the same software version as a Management unit. Applied to S-series stackin only. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.56 |
chAlarmUnsupportedOpticThe Interface Agent generate this trap when an unsupported optic is inserted in a port NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.57 |
chAlarmFanTrayOrPsuDownThe driver/agent generate this trap when a fan tray or psu is missing or down. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.58 |
chAlarmFanTrayOrPsuClearThe driver/agent generate this trap when a fan tray or psu is now operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.1.1.4.0.59 |
chAlarmVariable OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.4.1 |
chAlarmVarIntegerAn generic integer value in the TRAP objectro INTEGER .1.3.6.1.4.1.6027.3.1.1.4.1.1 |
chAlarmVarStringAn generic string value in the TRAP objectro OCTET STRING .1.3.6.1.4.1.6027.3.1.1.4.1.2 |
chAlarmVarSlotThe chassis slot number. For the traps that does not have slot information the value will -1 in the TRAP PDU.ro INTEGER .1.3.6.1.4.1.6027.3.1.1.4.1.3 |
chAlarmVarPortThe chassis port number. For the traps that does not have port information the value will -1 in the TRAP PDU.ro INTEGER .1.3.6.1.4.1.6027.3.1.1.4.1.4 |
chLineCardObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.1.5 |
chLineCardUtilTableA table listing the cpu and memory utilization in line cards. SEQUENCE OF ChLineCardUtilEntry .1.3.6.1.4.1.6027.3.1.1.5.1 |
chLineCardUtilEntryA row in each line card cpu and memory utilization ChLineCardUtilEntry .1.3.6.1.4.1.6027.3.1.1.5.1.1 |
chLineCardCpuUtil5SecCPU utilization in percentage for last 5 seconds.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.5.1.1.1 |
chLineCardCpuUtil1MinCPU utilization in percentage for last 1 minute.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.5.1.1.2 |
chLineCardCpuUtil5MinCPU utilization in percentage for last 5 minutes.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.5.1.1.3 |
chLineCardMemUsageUtilMemory usage in percentage.ro Gauge32 .1.3.6.1.4.1.6027.3.1.1.5.1.1.4 |
f10ChassisMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.2 |
f10ChassisMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.2.1 |
f10ChassisMibComplianceThe compliance statement for Dell Networking OS product which implement the f10 Chassis MIB. Unknown .1.3.6.1.4.1.6027.3.1.2.1.1 |
f10ChassisMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.1.2.2 |
f10ComponentGroupA collection of objects providing the overall chassis information. Unknown .1.3.6.1.4.1.6027.3.1.2.2.1 |
f10SystemGroupA collection of objects providing the chassis system hardware information. Unknown .1.3.6.1.4.1.6027.3.1.2.2.2 |
f10RpmGroupA collection of objects providing the Route Process Module (RPM) information. Unknown .1.3.6.1.4.1.6027.3.1.2.2.3 |
f10LineCardGroupA collection of objects providing CPU and Memory Utilization in the Line cards. Unknown .1.3.6.1.4.1.6027.3.1.2.2.4 |
f10ChassisNotificationGroupNotifications for Dell Networking OS Chassis mib Unknown .1.3.6.1.4.1.6027.3.1.2.2.5 |