DATALINK-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DATALINK-MIB.
390
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
390 total| Object Name |
|---|
asentria OBJECT IDENTIFIER .1.3.6.1.4.1.3052 |
RFC1155-SMI Unknown .1.3.6.1.4.1.3052 |
datalinkDbasePfullTrapThe datalinkDbasePfullTrap is issued when
the database reaches a pre-determined
threshold level, which
causes a trap. TRAP-TYPE .1.3.6.1.4.1.3052.0.501 |
datalinkFilePfullTrapThe datalinkFilePfullTrap is issued when
one of the data files reaches a pre-determined
threshold level, which
causes a trap. TRAP-TYPE .1.3.6.1.4.1.3052.0.502 |
datalinkDataAlarmTrapThe datalinkDataAlarmTrap is issued when
one of the data alarms reaches a pre-determined
threshold level, which
causes a trap. TRAP-TYPE .1.3.6.1.4.1.3052.0.503 |
datalinkSensorAlarmTrapThe datalinkSensorAlarmTrap is issued when
one of the External Sensors is triggered for a
pre-determined threshold amount of time, which
causes a trap. TRAP-TYPE .1.3.6.1.4.1.3052.0.504 |
datalinkNoDataAlarmTrapThe datalinkNoDataAlarmTrap is issued when
one of the ports receives no input data for a
pre-determined threshold amount of time, which
causes a trap. TRAP-TYPE .1.3.6.1.4.1.3052.0.505 |
datalinkSchedTrapThe datalinkSchedTrap is issued when a scheduled event
causes a trap. TRAP-TYPE .1.3.6.1.4.1.3052.0.506 |
datalinkImmediateTrapThe datalinkImmediateTrap is issued when the dotrap command
is used to issue a test trap to all snmp managers TRAP-TYPE .1.3.6.1.4.1.3052.0.507 |
datalinkPPPupTrapThe datalinkPPPupTrap is issued when the PPP interface is
brought up and the ppp connection has been established TRAP-TYPE .1.3.6.1.4.1.3052.0.509 |
datalink OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1 |
productIds OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.1 |
datalinkThisProductThis is a factory-configured string for the product namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.1.1 |
productConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.2 |
productnameA second string which may also contain name/version inforo DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.2.1 |
systemversionsystem rom version numberro INTEGER .1.3.6.1.4.1.3052.1.2.2 |
appversionapplication versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.2.3 |
hardware OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.2.4 |
numberportsnumber of RS232 ports foundro INTEGER .1.3.6.1.4.1.3052.1.2.4.1 |
netcard0 if no net card, 1 if net card foundro INTEGER .1.3.6.1.4.1.3052.1.2.4.2 |
modems0 if no modem, 1 if modem was foundro INTEGER .1.3.6.1.4.1.3052.1.2.4.3 |
networkenabled0 if not enabled, 1 if enabledro INTEGER .1.3.6.1.4.1.3052.1.2.4.4 |
memorysizememory size in Kro INTEGER .1.3.6.1.4.1.3052.1.2.4.5 |
factorysetup OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.2.5 |
modemreport5-char string, speed to report for modem speedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.2.5.1 |
modemportspeedmodem port baud rate 38400, 19200, etc.rw INTEGER .1.3.6.1.4.1.3052.1.2.5.2 |
modemsetupstringmodem setup string, e.g., ATe0v0s0=1rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.2.5.3 |
modemcddelayseconds after CD before sending answer stringrw INTEGER .1.3.6.1.4.1.3052.1.2.5.4 |
modemtypenumber factory-assigned to this particular modem, manufacturer, etc.rw INTEGER .1.3.6.1.4.1.3052.1.2.5.5 |
serialnumberup to 10 chars for factory-assigned serial numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.2.5.6 |
dateofmanufactureup to 8 chars for factory-assigned date of manufacturerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.2.5.7 |
databasemodedatabase compatibility mode, 1 -normal, 2 commandset2, etc.rw INTEGER .1.3.6.1.4.1.3052.1.2.6 |
unitIds OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.3 |
datalinkSiteIdSite ID stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.3.1 |
idByPortTablean id for type of data by port SEQUENCE OF SiteByPort .1.3.6.1.4.1.3052.1.3.2 |
sitebyportentry for table SiteByPort .1.3.6.1.4.1.3052.1.3.2.1 |
siteindexindex for which portro INTEGER .1.3.6.1.4.1.3052.1.3.2.1.1 |
siteIDsite id or type of data by portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.3.2.1.2 |
serialPorts OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.4 |
numberPortsnumber of RS232 ports found.ro INTEGER .1.3.6.1.4.1.3052.1.4.1 |
portSetupTableport setup table, serial params, collect data, etc. SEQUENCE OF PortSetup .1.3.6.1.4.1.3052.1.4.2 |
portSetupEntryport setup table, serial params, collect data, etc. PortSetup .1.3.6.1.4.1.3052.1.4.2.1 |
portIndexindex for tablero INTEGER .1.3.6.1.4.1.3052.1.4.2.1.1 |
portBaudbaud rate, 19200, 9600, etc.rw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.2 |
portWordword length, must be 7 or 8rw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.3 |
portParitya single-char string with values of N E or Orw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.4.2.1.4 |
portStopbitsnumber of stop bits, must be 1rw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.5 |
portDataStore0 data is not stored, 1 data is stored from this portrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.6 |
portBinaryMode0 data is ASCII, 1 data is binaryrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.7 |
portWrapMode0 oldest data not overwritten, 1 older data is overwrittenrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.8 |
portHskModeHSK mode to use when buffer close to full,
0 none, 1 xon, 2 DTR, 3 DTR and Xonrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.9 |
portDateTimeStampModeDate/time stamp mode to use,bit mapped
bit 0 - do date stamp
bit 1 - include year
bit 2 - include year 19xx or 20xx
bit 3 - include day of week
bit 4 - space after date
bit 5 - include time
bit 6 - include seconds
bit 7 - space after timerw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.10 |
portPTModepass-through access mode. 0=none, 1=by modem, 2=by network
any write kills the passthrough connection.
any write requires private community namerw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.11 |
portPTTimepass-through access mode time of this connection, in secondsro INTEGER .1.3.6.1.4.1.3052.1.4.2.1.12 |
portStoreFileselects which data file data from this port is stored intorw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.13 |
portPtStripOutputLfs0/1 no/yes in pass-through, strip LFs going to device on this portrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.14 |
portPtStripInputLfs0/1 no/yes in pass-through, strip LFs coming from device on this portrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.15 |
portlowDTR0/1 no/yes set DTR low and only raise it on SysAdmin & bypass connectionsrw INTEGER .1.3.6.1.4.1.3052.1.4.2.1.16 |
time OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.5 |
currenttimeText string for date and time: SUN 01/02/98 12:34:27rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.5.1 |
autoDstAdjust0 no adjust, 1 adjustrw INTEGER .1.3.6.1.4.1.3052.1.5.2 |
snmpsetup OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.6 |
snmpTrapsEnabled0 do not send any traps, 1 do send trapsrw INTEGER .1.3.6.1.4.1.3052.1.6.1 |
snmpManagerTablemanagement station names and addresses SEQUENCE OF SnmpManager .1.3.6.1.4.1.3052.1.6.2 |
snmpTableEntryentry for snmp table SnmpManager .1.3.6.1.4.1.3052.1.6.2.1 |
snmpMgrIndexindex for tablero INTEGER .1.3.6.1.4.1.3052.1.6.2.1.1 |
snmpManagerIpthe ip address of a managerrw IpAddress .1.3.6.1.4.1.3052.1.6.2.1.2 |
snmpManagerNamethe name of a manager, up to 80 charsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.6.2.1.3 |
snmpTrapsAutoRepeatTime0 do not repeat, else number of minutes to repeatrw INTEGER .1.3.6.1.4.1.3052.1.6.3 |
snmpSendTestTrap0 on read, any Set sends test trap to all managers in tablerw INTEGER .1.3.6.1.4.1.3052.1.6.4 |
passwords OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.7 |
modemPasswords0 no modem passwords required, 1 modem passwords are required
write requires private community namerw INTEGER .1.3.6.1.4.1.3052.1.7.1 |
tcpPasswords0 no telnet/tcp passwords required, 1 passwords are required
write requires private community namerw INTEGER .1.3.6.1.4.1.3052.1.7.2 |
ftpPasswords0 no ftp passwords required, 1 passwords are required
write requires private community namerw INTEGER .1.3.6.1.4.1.3052.1.7.3 |
promptPasswords0 no Password: prompt, 1 -> show Password: promptrw INTEGER .1.3.6.1.4.1.3052.1.7.4 |
commandPassword OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.7.5 |
commandNeedsPassword0 not needed, 1 is needed
write requires private community namerw INTEGER .1.3.6.1.4.1.3052.1.7.5.1 |
commandPasswordTimeout1-99, number of minutes of no activity which auto logs user outrw INTEGER .1.3.6.1.4.1.3052.1.7.5.2 |
passwordTableTable of password entries, r-w only with private comm. name SEQUENCE OF PasswordTable .1.3.6.1.4.1.3052.1.7.6 |
passwordTableEntryentry to password table PasswordTable .1.3.6.1.4.1.3052.1.7.6.1 |
passwordIndexindex to password tablero INTEGER .1.3.6.1.4.1.3052.1.7.6.1.1 |
passwordCommandpassword for command accessrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.7.6.1.2 |
passwordAccesspassword for pass-through accessrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.7.6.1.3 |
ftpsetup OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.8 |
ftpAutoDelete0 files not autodeleted, 1 deleted on readingrw INTEGER .1.3.6.1.4.1.3052.1.8.1 |
ftpDataMode0 normal, 1 compression mode 1, etc.rw INTEGER .1.3.6.1.4.1.3052.1.8.2 |
ftpPush OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.8.3 |
ftpPushEnabled0-no, 1-yes, enables ftp data pushrw INTEGER .1.3.6.1.4.1.3052.1.8.3.1 |
ftpPushTiminghow often data is pushed, 2-255 minutesrw INTEGER .1.3.6.1.4.1.3052.1.8.3.2 |
ftpPushTimertimer which counts to ftpPushTimingrw INTEGER .1.3.6.1.4.1.3052.1.8.3.3 |
ftpPushIPAddressip address of ftp server to which we push the datarw IpAddress .1.3.6.1.4.1.3052.1.8.3.4 |
ftpPushUsertext string to send for the user idrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.8.3.5 |
ftpPushPasstext string to send for the ftp server passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.8.3.6 |
ftpPushAccttext string to send for the account, if usedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.8.3.7 |
ftpPushDirtext string to send for the directory we CWD torw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.8.3.8 |
ftppushTableTable of ftp push enables SEQUENCE OF FtpPushTable .1.3.6.1.4.1.3052.1.8.3.9 |
ftppushTableEntryentry to ftp push table FtpPushTable .1.3.6.1.4.1.3052.1.8.3.9.1 |
ftppushIndexindex to ftp push tablero INTEGER .1.3.6.1.4.1.3052.1.8.3.9.1.1 |
ftppushEnableenable for ftp push, indexed by filerw INTEGER .1.3.6.1.4.1.3052.1.8.3.9.1.2 |
ftpPushAlarms0-no, 1-yes, do we push the ALARMS filerw INTEGER .1.3.6.1.4.1.3052.1.8.3.10 |
ftpPushCountnumber of ftp data pushes tried since rebootro INTEGER .1.3.6.1.4.1.3052.1.8.3.11 |
ftpPushStatusMode0-none, 1-append, 2-replace, status file modesrw INTEGER .1.3.6.1.4.1.3052.1.8.3.12 |
ftpPushServerNameName of the FTP Push Targer Serverrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.8.3.13 |
databases OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.9 |
entireDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.9.1 |
databaseStatus OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.9.1.1 |
databasePfullpercentage full of all databasero INTEGER .1.3.6.1.4.1.3052.1.9.1.1.1 |
databaseSizeSize of Data Storage Area, in bytesro INTEGER .1.3.6.1.4.1.3052.1.9.1.1.2 |
databaseRecordsAvailableRecords which are available to read, total in all filesro INTEGER .1.3.6.1.4.1.3052.1.9.1.1.3 |
databaseRecordsDeletedRecords which are deleted, total in all filesro INTEGER .1.3.6.1.4.1.3052.1.9.1.1.4 |
databaseAlarmTabletable for levels 1 2 3 of all database alarms and actions SEQUENCE OF DatabaseAlarm .1.3.6.1.4.1.3052.1.9.1.2 |
databaseAlarmEntryentry for database alarm config and actions table DatabaseAlarm .1.3.6.1.4.1.3052.1.9.1.2.1 |
databaseAlarmIndexIndex for table, 1 2 or 3ro INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.1 |
databaseAlarmActive0/1, 1 = activerw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.2 |
databaseAlarmThreshold1-99, percentage full threshold levelrw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.3 |
databaseAlarmBeeperActions0 1 2, -> none, 1/10 or 10/10rw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.4 |
databaseAlarmSerialActionsbits 0-7 show which messages 1-8 are sentrw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.5 |
databaseAlarmPagerActionsbits 0-7 show which pagers 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.6 |
databaseAlarmCalloutActionsbits 0-7 show which modem callouts 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.7 |
databaseAlarmTrapActions0/1 for traps are sent or notrw INTEGER .1.3.6.1.4.1.3052.1.9.1.2.1.8 |
databaseAlarmFileStore0-no, 1-yes, store alarms in the ALARMS filerw INTEGER .1.3.6.1.4.1.3052.1.9.1.3 |
databaseAlarmFileMaxSizein K, max size for alarms file 4-32krw INTEGER .1.3.6.1.4.1.3052.1.9.1.4 |
databaseFiles OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.9.2 |
filesetup OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.9.2.1 |
charmaskEnabled0/1 char masking enabledrw INTEGER .1.3.6.1.4.1.3052.1.9.2.1.1 |
charmask32-byte hex ascii for character maskingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.9.2.1.2 |
maxRecordCharsmax characters in an ASCII recordrw INTEGER .1.3.6.1.4.1.3052.1.9.2.1.3 |
binRecordBlocking# chars max to block binary records intorw INTEGER .1.3.6.1.4.1.3052.1.9.2.1.4 |
recordCollectionTimeout# seconds to allow before terminating a record automaticallyrw INTEGER .1.3.6.1.4.1.3052.1.9.2.1.5 |
fileTabletable of directory entries SEQUENCE OF FileTable .1.3.6.1.4.1.3052.1.9.2.2 |
fileTableEntryentry for table FileTable .1.3.6.1.4.1.3052.1.9.2.2.1 |
fileTableIndexindex for the tablero INTEGER .1.3.6.1.4.1.3052.1.9.2.2.1.1 |
fileNamename of the filero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.9.2.2.1.2 |
fileTypetype of data, up to 24 charsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.9.2.2.1.3 |
fileSizefile size in bytesro INTEGER .1.3.6.1.4.1.3052.1.9.2.2.1.4 |
fileRecordsfile size in recordsro INTEGER .1.3.6.1.4.1.3052.1.9.2.2.1.5 |
fileRecordsAvailable# recs availablero INTEGER .1.3.6.1.4.1.3052.1.9.2.2.1.6 |
fileRecordsDeleted# recs deletedro INTEGER .1.3.6.1.4.1.3052.1.9.2.2.1.7 |
filePercentNow% of all of memory this file is, right nowro INTEGER .1.3.6.1.4.1.3052.1.9.2.2.1.8 |
fileAlarmsfile alarms, indexed by file and threshold SEQUENCE OF FileAlarm .1.3.6.1.4.1.3052.1.9.2.3 |
fileAlarmEntryentry to the table FileAlarm .1.3.6.1.4.1.3052.1.9.2.3.1 |
fileAlarmFileIndexindex for filenumberro INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.1 |
fileAlarmThresholdIndexindex for filenumber thresholdro INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.2 |
fileAlarmActive0/1 this file alarm activerw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.3 |
fileAlarmThreshold1-99, threshold levelrw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.4 |
fileAlarmBeeperActions0 1 2, none, 1/10 or 10/10rw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.5 |
fileAlarmSerialActionsbits 0-7 show which messages 1-8 are sentrw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.6 |
fileAlarmPagerActionsbits 0-7 show which pagers 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.7 |
fileAlarmCalloutActionsbits 0-7 show which modem callouts 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.8 |
fileAlarmTrapActions0/1 for traps are sent or notrw INTEGER .1.3.6.1.4.1.3052.1.9.2.3.1.9 |
alarms OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.10 |
dataAlarmTabletable of read-only items for data alarm setup SEQUENCE OF DataAlarm .1.3.6.1.4.1.3052.1.10.1 |
dataAlarmEntryData alarm table entry DataAlarm .1.3.6.1.4.1.3052.1.10.1.1 |
dataAlarmIndexindex for data alarmsro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.1 |
dataAlarmActive0/1 activero INTEGER .1.3.6.1.4.1.3052.1.10.1.1.2 |
dataAlarmNamename of alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.1.1.3 |
dataAlarmCountercounter for this alarmro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.4 |
dataAlarmThresholdthreshold for this alarmro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.5 |
dataAlarmClearModecode for clearing modero INTEGER .1.3.6.1.4.1.3052.1.10.1.1.6 |
dataAlarmClearTimetime of day, e.g., 01:20ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.1.1.7 |
dataAlarmAcked0 on read, any set to ack this alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.1.1.8 |
dataAlarmBeeperActions0 1 2, none, 1/10 or 10/10ro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.9 |
dataAlarmSerialActionsbits 0-7 show which messages 1-8 are sentro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.10 |
dataAlarmPagerActionsbits 0-7 show which pagers 1-8 are usedro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.11 |
dataAlarmCalloutActionsbits 0-7 show which modem callouts 1-8 are usedro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.12 |
dataAlarmTrapActions0/1 for traps are sent or notro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.13 |
dataAlarmStringlast data alarm string for this alarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.1.1.14 |
dataAlarmPortport number for last data alarm string for this alarmro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.15 |
dataAlarmAutoClear0/1 disabled/enabled to auto clear counter when it reached thresholdro INTEGER .1.3.6.1.4.1.3052.1.10.1.1.16 |
sensorAlarmTabletable of read-only items for sensor alarm setup SEQUENCE OF SensorAlarm .1.3.6.1.4.1.3052.1.10.2 |
sensorAlarmEntrysensor alarm table entry SensorAlarm .1.3.6.1.4.1.3052.1.10.2.1 |
sensorAlarmIndexindex for sensor alarmsro INTEGER .1.3.6.1.4.1.3052.1.10.2.1.1 |
sensorAlarmActive0/1 activerw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.2 |
sensorAlarmNamename of alarmrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.2.1.3 |
sensorAlarmMode0 - open active, 1 - closed activerw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.4 |
sensorAlarmCountercounter for this alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.5 |
sensorAlarmThresholdthreshold for this alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.6 |
sensorAlarmAcked0 on read, any set to ack this alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.7 |
sensorAlarmBeeperActions0 1 2, none, 1/10 or 10/10rw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.8 |
sensorAlarmSerialActionsbits 0-7 show which messages 1-8 are sentrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.9 |
sensorAlarmPagerActionsbits 0-7 show which pagers 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.10 |
sensorAlarmCalloutActionsbits 0-7 show which modem callouts 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.11 |
sensorAlarmTrapActions0/1 for traps are sent or notrw INTEGER .1.3.6.1.4.1.3052.1.10.2.1.12 |
sensorAlarmState0-> open 1-> closed for current statero INTEGER .1.3.6.1.4.1.3052.1.10.2.1.13 |
nodataAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.10.3 |
nodataAlarmStatusno data status table SEQUENCE OF NodataAlarmStatus .1.3.6.1.4.1.3052.1.10.3.1 |
nodataAlarmStatusEntrystatus table entry NodataAlarmStatus .1.3.6.1.4.1.3052.1.10.3.1.1 |
nodataAlarmStatusIndexindex for tablero INTEGER .1.3.6.1.4.1.3052.1.10.3.1.1.1 |
nodataAlarmStatusCounterthe nodata counterrw INTEGER .1.3.6.1.4.1.3052.1.10.3.1.1.2 |
nodataAlarmStatusAckedreads as 0, any write acks this alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.3.1.1.3 |
nodataTablenodata table SEQUENCE OF NodataTable .1.3.6.1.4.1.3052.1.10.3.2 |
nodataTableEntrynodata defn. table entry NodataTable .1.3.6.1.4.1.3052.1.10.3.2.1 |
nodataTablePortIndexindex by port INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.1 |
nodataTableScheduleIndexindex by schedule INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.2 |
nodataTableLevelIndexindex by level INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.3 |
nodataTableActive0/1 , enabled or notrw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.4 |
nodataTableScheduleschedule, format is hh:mm-hh:mmrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.3.2.1.5 |
nodataTableThreshold#minutes for no data for alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.6 |
nodataTableBeeperActions0 1 2, none, 1/10 or 10/10rw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.7 |
nodataTableSerialActionsbits 0-7 show which messages 1-8 are sentrw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.8 |
nodataTablePagerActionsbits 0-7 show which pagers 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.9 |
nodataTableCalloutActionsbits 0-7 show which modem callouts 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.10 |
nodataTableTrapActions0/1 for traps are sent or notrw INTEGER .1.3.6.1.4.1.3052.1.10.3.2.1.11 |
nodataAlarmHolidays OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.10.3.3 |
nodataNumberHolidaysnumber of nodata holidays definedro INTEGER .1.3.6.1.4.1.3052.1.10.3.3.1 |
nodataHolidayTableholiday table SEQUENCE OF NodataHoliday .1.3.6.1.4.1.3052.1.10.3.3.2 |
nodataHolidayTableEntryholiday table entry NodataHoliday .1.3.6.1.4.1.3052.1.10.3.3.2.1 |
nodataHolidayIndexindex for holiday listro INTEGER .1.3.6.1.4.1.3052.1.10.3.3.2.1.1 |
nodataHolidayItemholiday list item, format is mm/ddro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.3.3.2.1.2 |
nodataHolidayAddnull on read, set with holiday to add MM/DDrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.3.3.3 |
nodataHolidayDeletenull on read, set with holiday to delete MM/DDrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.3.3.4 |
nodataHolidayClearread returns 0, write requires private community name.
used to clear the holiday listrw INTEGER .1.3.6.1.4.1.3052.1.10.3.3.5 |
scheduleAlarmTablescheduled alarm table SEQUENCE OF ScheduleAlarm .1.3.6.1.4.1.3052.1.10.4 |
scheduleAlarmEntryschedule table entry ScheduleAlarm .1.3.6.1.4.1.3052.1.10.4.1 |
scheduleIndexday indexro INTEGER .1.3.6.1.4.1.3052.1.10.4.1.1 |
scheduleActiveif active or notrw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.2 |
scheduleTimetime of day format is: hh:mmrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.10.4.1.3 |
scheduleAckedreads 0, any set acks alarmrw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.4 |
scheduleBeeperActions0 1 2, none, 1/10 or 10/10rw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.5 |
scheduleSerialActionsbits 0-7 show which messages 1-8 are sentrw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.6 |
schedulePagerActionsbits 0-7 show which pagers 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.7 |
scheduleCalloutActionsbits 0-7 show which modem callouts 1-8 are usedrw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.8 |
scheduleTrapActions0/1 for traps are sent or notrw INTEGER .1.3.6.1.4.1.3052.1.10.4.1.9 |
actions OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.11 |
actionsBuzzer OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.11.1 |
actionsBuzzerStatecurrent buzzer state 0.1.2ro INTEGER .1.3.6.1.4.1.3052.1.11.1.1 |
actionsSerialTableserial message table SEQUENCE OF SerialTable .1.3.6.1.4.1.3052.1.11.2 |
actionsSerialTableEntryserial table entry SerialTable .1.3.6.1.4.1.3052.1.11.2.1 |
serialTableIndexserial table indexro INTEGER .1.3.6.1.4.1.3052.1.11.2.1.1 |
serialTableMessageserial table stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.11.2.1.2 |
actionsPagerTablepager table SEQUENCE OF PagerTable .1.3.6.1.4.1.3052.1.11.3 |
actionsPagerTableEntrypager table entry PagerTable .1.3.6.1.4.1.3052.1.11.3.1 |
pagerTableIndextable indexro INTEGER .1.3.6.1.4.1.3052.1.11.3.1.1 |
pagerType0-numeric, 1-alpharw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.2 |
pagerPhonenumberphone number to call for pagerrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.11.3.1.3 |
pagerIDID or 2nd number to dialrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.11.3.1.4 |
pagerDialDelay# seconds on numeric to delay between dial and send pagerID or messagerw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.5 |
pagerHangupDelay# seconds on numeric to delay between messages and before hanguprw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.6 |
pagerMessagemessage, either alpha or numericrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.11.3.1.7 |
pagerSendId0/1 send unit ID or not to pagerrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.8 |
pagerSendReason0/1 send reason for page or not to pagerrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.9 |
pagerMaxAttemptsmax tries to be successfulrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.10 |
pagerAttemptscurrent number of triesrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.11 |
pagerAttemptDelay# minutes between attemptsrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.12 |
pagerRepeat0/1 do we repeat successfulrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.13 |
pagerRepeatDelay# minutes between repeats, if usedrw INTEGER .1.3.6.1.4.1.3052.1.11.3.1.14 |
actionsCalloutTablecallout table SEQUENCE OF CalloutTable .1.3.6.1.4.1.3052.1.11.4 |
actionsCalloutTableEntrycallout table entry CalloutTable .1.3.6.1.4.1.3052.1.11.4.1 |
calloutTableIndextable indexro INTEGER .1.3.6.1.4.1.3052.1.11.4.1.1 |
calloutPhonenumberphone number to call for calloutrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.11.4.1.2 |
calloutMaxConnecttime# seconds to wait for carrierrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.3 |
calloutMessagemessage to sendrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.11.4.1.4 |
calloutSendId0/1 send unit ID or not to calloutrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.5 |
calloutSendReason0/1 send reason for page or not to calloutrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.6 |
calloutCommandWait#seconds to wait for a command on a callout before hanguprw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.7 |
calloutMaxAttemptsmax tries to be successfulrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.8 |
calloutAttemptscurrent number of triesrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.9 |
calloutAttemptDelay# minutes between attemptsrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.10 |
calloutRepeat0/1 do we repeat successfulrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.11 |
calloutRepeatDelay# minutes between repeats, if usedrw INTEGER .1.3.6.1.4.1.3052.1.11.4.1.12 |
actionsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.11.5 |
actionsTrapsEntSpecific0/1 enterprise specific traps enabledrw INTEGER .1.3.6.1.4.1.3052.1.11.5.1 |
actionsTrapsEntSpecCountnumber of enterprise specific traps sent since last re-bootro INTEGER .1.3.6.1.4.1.3052.1.11.5.2 |
controls OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12 |
opSettings OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12.1 |
linefeeds0/1 are linefeeds added to CRs on command responses?rw INTEGER .1.3.6.1.4.1.3052.1.12.1.1 |
duplex0-half 1-fullrw INTEGER .1.3.6.1.4.1.3052.1.12.1.2 |
response0-codes 1-wordsrw INTEGER .1.3.6.1.4.1.3052.1.12.1.3 |
datafilterEnabled0/1 off/onrw INTEGER .1.3.6.1.4.1.3052.1.12.1.4 |
alarmfilterEnabled0/1 off/onrw INTEGER .1.3.6.1.4.1.3052.1.12.1.5 |
auxportMode OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12.1.6 |
operatingMode1 command 2 input/access 3 unused 4 inline 5 extmodemrw INTEGER .1.3.6.1.4.1.3052.1.12.1.6.1 |
inlineMode1,2,3 if inline, mode 1 (N->2) mode 2 (1->2, 3->4) mode 3
(1->2, 3->4, 5->6)rw INTEGER .1.3.6.1.4.1.3052.1.12.1.6.2 |
inlineSourceif inline and inlineMode==1, source of I/O2 inlinerw INTEGER .1.3.6.1.4.1.3052.1.12.1.6.3 |
inlineHskMode OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12.1.6.4 |
inlineHsk2handshake mode 0-3 for inline port I/O 2rw INTEGER .1.3.6.1.4.1.3052.1.12.1.6.4.1 |
inlineHsk4handshake mode 0-3 for inline port I/O 4rw INTEGER .1.3.6.1.4.1.3052.1.12.1.6.4.2 |
inlineHsk6handshake mode 0-3 for inline port I/O 6rw INTEGER .1.3.6.1.4.1.3052.1.12.1.6.4.3 |
sureEnabled0/1 off/onrw INTEGER .1.3.6.1.4.1.3052.1.12.1.7 |
commandTcpipTimeout0-none, else number of no-activity minutes -> tcpip command to droprw INTEGER .1.3.6.1.4.1.3052.1.12.1.8 |
sysadminTcpipTimeout0-none, else number of no-activity minutes -> tcpip sysadmin to droprw INTEGER .1.3.6.1.4.1.3052.1.12.1.9 |
bypassEndcharascii value for character to exit bypass mode. default ->27rw INTEGER .1.3.6.1.4.1.3052.1.12.1.10 |
routerAutoPing0/1 = no/yes, default is 0, do we ping the default router
every 10 minutes?rw INTEGER .1.3.6.1.4.1.3052.1.12.1.11 |
modemSettings OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12.2 |
modemParity1 7E 2 7O 3 8Nrw INTEGER .1.3.6.1.4.1.3052.1.12.2.1 |
modemUserSetupsent to modem on init before the factory setup stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.12.2.2 |
modemTapSetupsent to modem on just before doing TAP (alpha pager) protocolrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.12.2.3 |
modemAnswerStringsent when modem makes connectionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.12.2.4 |
modemExtSetupsent to ext. modem for setup stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.12.2.5 |
modemExtSetupTime# minutes of idle time between sending ext. modem setup stringrw INTEGER .1.3.6.1.4.1.3052.1.12.2.6 |
modemInactivityTimer# minutes of no transmit which aborts a connectionrw INTEGER .1.3.6.1.4.1.3052.1.12.2.7 |
modemAutoexecStringcommand string which auto-executes after modem connection if
no other command within 10 secondsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.12.2.8 |
modemAutoexecEnabled0/1 autoexec enabledrw INTEGER .1.3.6.1.4.1.3052.1.12.2.9 |
modemTimeBetweenOutbound# seconds (minimum) between outbound call attemptsrw INTEGER .1.3.6.1.4.1.3052.1.12.2.10 |
dataRelease OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12.3 |
releaseMode1-Line 3-CBB 4-Xmodemrw INTEGER .1.3.6.1.4.1.3052.1.12.3.1 |
autodeleteEnable1/2 off/on autodelete for CBB and Xmodemrw INTEGER .1.3.6.1.4.1.3052.1.12.3.2 |
releaseCompressed1-compressed 2-decompressedrw INTEGER .1.3.6.1.4.1.3052.1.12.3.3 |
otherControls OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.12.4 |
waitMode1/2 off/on wait for 02 after 01 on rlmodesrw INTEGER .1.3.6.1.4.1.3052.1.12.4.1 |
tagMode1/2 off/on Line/Block tag enabledrw INTEGER .1.3.6.1.4.1.3052.1.12.4.2 |
crcMode1/2 off/on add CRC to ascii releasesrw INTEGER .1.3.6.1.4.1.3052.1.12.4.3 |
dleMode1/2 off/on use DLE stuffing on CBBrw INTEGER .1.3.6.1.4.1.3052.1.12.4.4 |
cbbRetransmits# times a block retransmitted in CBB moderw INTEGER .1.3.6.1.4.1.3052.1.12.4.5 |
cbbTimeout# seconds to wait for an ack before retransmit in CBB moderw INTEGER .1.3.6.1.4.1.3052.1.12.4.6 |
activeDatabaseselects a file. ports 2001-2006 auto select this variablerw INTEGER .1.3.6.1.4.1.3052.1.12.5 |
alarmhistory OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.13 |
actionQueue OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.13.1 |
actionCountnumber of active items in action table, 0-nnro INTEGER .1.3.6.1.4.1.3052.1.13.1.1 |
actionTableaction queue table SEQUENCE OF ActionTable .1.3.6.1.4.1.3052.1.13.1.2 |
actionTableEntryaction queue entry ActionTable .1.3.6.1.4.1.3052.1.13.1.2.1 |
actionTableIndexaction table entryro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.1 |
actionAckedreads 0, any set removes (acks) this actionrw INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.2 |
actionReasoncode reason for actionro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.3 |
actionReasonIDwhich of the (reasons) e.g, alarm 3 vs. alarm 4ro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.4 |
actionReasonLevelwhich of the levels for alarms which have 1-3 levelsro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.5 |
actionTypetype of action being taken (page, callout, etc.)ro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.6 |
actionTypeIDwhich of the actions e.g, pager 3 vs. pager 4ro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.7 |
actionRepeatTime#minutes between repeats of attempts of this actionro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.8 |
actionAttempts# of attempts to try this action so farro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.9 |
actionNextAttempt# minutes until the next attempt of this actionro INTEGER .1.3.6.1.4.1.3052.1.13.1.2.1.10 |
actionTimeStampdate and time string: 02/34 12:34, or text message if no itemsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.13.1.2.1.11 |
actionHistory OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.13.2 |
historyCountnumber of history items in history table, 0-nnro INTEGER .1.3.6.1.4.1.3052.1.13.2.1 |
historyTableaction history table SEQUENCE OF HistoryTable .1.3.6.1.4.1.3052.1.13.2.2 |
historyTableEntryhistory queue entry HistoryTable .1.3.6.1.4.1.3052.1.13.2.2.1 |
historyTableIndexhistory table entryro INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.1 |
historyEntryTypetype of entry (e.g., modem fail, pager pass, etc.)rw INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.2 |
historyReasoncode reason for historyro INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.3 |
historyReasonIDwhich of the (reasons) e.g, alarm 3 vs. alarm 4ro INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.4 |
historyReasonLevelwhich of the levels for alarms which have 1-3 levelsro INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.5 |
historyTypetype of history being taken (page, callout, etc.)ro INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.6 |
historyTypeIDwhich of the historys e.g, pager 3 vs. pager 4ro INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.7 |
historyTimeStampdate and time string: 02/34 12:34, or text message if no itemsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.13.2.2.1.8 |
historyClearLogreads 0, any set clears all history log itemsrw INTEGER .1.3.6.1.4.1.3052.1.13.2.2.1.9 |
lastCalloutPageReasonthe reason string for the last callout or page, or NONE if never usedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.13.3 |
realtimesocket OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.14 |
rtsShowAnswer0-no 1-yes, show answer string on connection (deprecated)rwdeprecated INTEGER .1.3.6.1.4.1.3052.1.14.1 |
rtsNeedPassword0-no 1-yes, need password on RTS connection (deprecated)rodeprecated INTEGER .1.3.6.1.4.1.3052.1.14.2 |
rtsWaitXon0-no 1-yes, wait for Xon after connection before sending data (deprecated)rwdeprecated INTEGER .1.3.6.1.4.1.3052.1.14.3 |
rtsIdleTimeout0-255, 0-none, 1-255 #idle minutes no data = shutdown socket (deprecated)rwdeprecated INTEGER .1.3.6.1.4.1.3052.1.14.4 |
rtsEmptyClose0->no, 1-> yes, when file empty close socket (polling, not rt data) (deprecated)rwdeprecated INTEGER .1.3.6.1.4.1.3052.1.14.5 |
rtsTablereal time socket table SEQUENCE OF RtsTable .1.3.6.1.4.1.3052.1.14.6 |
rtsTableEntryrts table entry RtsTable .1.3.6.1.4.1.3052.1.14.6.1 |
rtsTableIndexrts table entry indexro INTEGER .1.3.6.1.4.1.3052.1.14.6.1.1 |
rtsNoStore0-allow storage, 1-don't store data when RTS socket not connectedrw INTEGER .1.3.6.1.4.1.3052.1.14.6.1.2 |
rtsDenied0-don't allow, 1=yes allow this rts socket to connectrw INTEGER .1.3.6.1.4.1.3052.1.14.6.1.3 |
rtsSocketState0-closed, 1-wait for pass, 2-wait for xon, 3=open for dataro INTEGER .1.3.6.1.4.1.3052.1.14.6.1.4 |
rtsPortShowAnswer0-no 1-yes, show answer string on connectionrw INTEGER .1.3.6.1.4.1.3052.1.14.6.1.5 |
rtsPortNeedPassword0-no 1-yes, need password on RTS connectionro INTEGER .1.3.6.1.4.1.3052.1.14.6.1.6 |
rtsPortWaitXon0-no 1-yes, wait for Xon after connection before sending datarw INTEGER .1.3.6.1.4.1.3052.1.14.6.1.7 |
rtsPortIdleTimeout0-255, 0-none, 1-255 #idle minutes no data = shutdown socketrw INTEGER .1.3.6.1.4.1.3052.1.14.6.1.8 |
rtsPortEmptyClose0->no, 1-> yes, when file empty close socket (polling, not rt data)rw INTEGER .1.3.6.1.4.1.3052.1.14.6.1.9 |
iprestrictions OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.15 |
iprestrictTableip restrictions table SEQUENCE OF IpRestrictTable .1.3.6.1.4.1.3052.1.15.1 |
iprestrictTableEntryip restriction table entry IpRestrictTable .1.3.6.1.4.1.3052.1.15.1.1 |
iprestrictTableIndexip restrict table entry indexro INTEGER .1.3.6.1.4.1.3052.1.15.1.1.1 |
iprestrictIpAddressan ip address which forces a restriction or allowance for an ip rangero IpAddress .1.3.6.1.4.1.3052.1.15.1.1.2 |
suspendIPRestrictionsread returns 0, writing requires the private community name.
default is 0
set to 1 to suspend IP restrictions while loading the list
set back to 0 to allow the restrictions to be used.rw INTEGER .1.3.6.1.4.1.3052.1.15.2 |
killIPRestrictionsread returns 0, writing requires the private community name.
any set removes all entries from the IP restrcition list.rw INTEGER .1.3.6.1.4.1.3052.1.15.3 |
addIPRestrictionsread returns 0, writing requires the private community name.
any set adds an entry to the IP restriction list
note that list is no re-sorted, so must add in orderrw IpAddress .1.3.6.1.4.1.3052.1.15.4 |
ipsetup OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.16 |
ipCurrent OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.16.1 |
ipCurrentStatic1=static, 0=dynamicro INTEGER .1.3.6.1.4.1.3052.1.16.1.1 |
ipCurrentAddresscurrent IP addressro IpAddress .1.3.6.1.4.1.3052.1.16.1.2 |
ipCurrentSubnetMaskcurrent subnet maskro IpAddress .1.3.6.1.4.1.3052.1.16.1.3 |
ipCurrentDefaultRoutercurrent default routerro IpAddress .1.3.6.1.4.1.3052.1.16.1.4 |
ipNew OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.16.2 |
ipNewStatic1=static, 0=dynamic. write requires private community name.rw INTEGER .1.3.6.1.4.1.3052.1.16.2.1 |
ipNewAddressread=current new address, write requires private community name.rw IpAddress .1.3.6.1.4.1.3052.1.16.2.2 |
ipNewSubnetMaskread=current new subnet mask, write requires private community name.rw IpAddress .1.3.6.1.4.1.3052.1.16.2.3 |
ipNewDefaultRouterread=current new default router, write requires private community name.rw IpAddress .1.3.6.1.4.1.3052.1.16.2.4 |
ipNewSetupread=0.
write requires private community name.
any write causes the current object values for ipNewStatic,
ipNewAddress, ipNewSubnetMask and ipNewDefaultRouter to be used.
Causes the unit to re-initialize its network stacks
with these new values. Changes to ipNewStatic, ipNewAddress,
ipNewSubnetMask and ipNewDefaultRouter
do not affect the network stack until ipNewSetup is written with
some value:rw INTEGER .1.3.6.1.4.1.3052.1.16.2.5 |
pppsetup OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.17 |
pppIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.17.1 |
pppIDStringsent in ppp up trap to provide host identification stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3052.1.17.1.1 |
pppIPAddresssent in ppp up trap to provide host identification by IP addressro IpAddress .1.3.6.1.4.1.3052.1.17.1.2 |
ccode OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.18 |
ccodeLoaded0/1, no/yes, is ccode loadedro INTEGER .1.3.6.1.4.1.3052.1.18.1 |
ccodeRunning0/1, no/yes, is ccode runningro INTEGER .1.3.6.1.4.1.3052.1.18.2 |
ccodeStackMainWas# of bytes of stack used by main app, last time runro INTEGER .1.3.6.1.4.1.3052.1.18.3 |
ccodeStackMainNow# of bytes of stack used by main app, this time runro INTEGER .1.3.6.1.4.1.3052.1.18.4 |
ccodeStackT2Was# of bytes of stack used by 2nd task of app, last time runro INTEGER .1.3.6.1.4.1.3052.1.18.5 |
ccodeStackT2Was2# of bytes of stack used by 2nd task of app, this time runro INTEGER .1.3.6.1.4.1.3052.1.18.6 |
techsupport OBJECT IDENTIFIER .1.3.6.1.4.1.3052.1.99 |
techsupportInt1a debugging integer for technical support use only. Do not userw INTEGER .1.3.6.1.4.1.3052.1.99.1 |
techsupportInt2a debugging integer for technical support use only. Do not userw INTEGER .1.3.6.1.4.1.3052.1.99.2 |
techsupportInt3a debugging integer for technical support use only. Do not userw INTEGER .1.3.6.1.4.1.3052.1.99.3 |
techsupportInt4a debugging integer for technical support use only. Do not userw INTEGER .1.3.6.1.4.1.3052.1.99.4 |
techsupportInt5a debugging integer for technical support use only. Do not userw INTEGER .1.3.6.1.4.1.3052.1.99.5 |
More MIBs from Asentria
Browse all AsentriaMIBs →SITEBOSS-360-STD-MIB
The SITEBOSS-360-STD-MIB module enables SNMP-based monitoring and management of Asentria SiteBoss 360 wireless access points and controllers, exposing critical operational metrics including RF channel utilization, transmit power levels, client association states, and interface traffic statistics.
2241 objects→
SITEBOSS-350-STD-MIB
SNMP MIB module
1653 objects→
SITEBOSS-571-STD-MIB
SNMP MIB module
1537 objects→
SITEBOSS-572-STD-MIB
The SITEBOSS-572-STD-MIB module enables SNMP-based monitoring and management of the Asentria SiteBoss 572 wireless access point, providing access to device status, RF performance metrics, and client session statistics.
1500 objects→
SITEBOSS-450-STD-MIB
SNMP MIB module
1490 objects→
SITEBOSS-550-STD-MIB
The SITEBOSS-550-STD-MIB provides SNMP-based monitoring and management capabilities for the Asentria SiteBoss 550 wireless access point, exposing standard interface statistics, radio performance metrics, and device health indicators. This module enables centralized tracking of client association states, signal strength, throughput counters, and system resource utilization for the SiteBoss 550 hardware platform.
1423 objects→