DACS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DACS-MIB.
1750
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
1750 total| Object Name |
|---|
rad OBJECT IDENTIFIER .1.3.6.1.4.1.164 |
RFC1213-MIB Unknown .1.3.6.1.4.1.164 |
radTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.164.1 |
radFddi OBJECT IDENTIFIER .1.3.6.1.4.1.164.2 |
radWan OBJECT IDENTIFIER .1.3.6.1.4.1.164.3 |
wanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1 |
chasWanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.1 |
chasVersionAn ASCII string for description and display of the agent chassis version.ro DisplayString .1.3.6.1.4.1.164.3.1.1.1 |
chasTotalNoOfSltThis entry indicates the number of physical slots in the
chassis.ro INTEGER .1.3.6.1.4.1.164.3.1.1.2 |
chasTotalNoOfIoSltThis entry indicates the total number of physical IO slots
in the chassis, (not all slots hardware should be occupied
and active) .ro INTEGER .1.3.6.1.4.1.164.3.1.1.3 |
chasTotalNoOfPsSltThis entry indicates the number of physical Power Supply
slots in the chassis.ro INTEGER .1.3.6.1.4.1.164.3.1.1.4 |
chasTotalNoOfClSltThis entry indicates the number of physical Common Logic slots in the
chassis.ro INTEGER .1.3.6.1.4.1.164.3.1.1.5 |
agnWanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2 |
statAgnGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.1 |
agnSDateFormatThis entry indicates the date and time format used for the
agnSDateAndTimeCmd and for the alarm history report.
MP-2100H, MP-2100 r1-r4 and MAXcess products do not support
the 'yyyyMMDD' format.rw Enumeration .1.3.6.1.4.1.164.3.1.2.1.1 |
agnSDateCmdThis entry indicates the current date as it is known by the
agent using its own real-time clock. The format would be as
specified by the agnSDateFormat.
This parameter can be set for time synchronization between
the NMS and the Agent.rw DisplayString .1.3.6.1.4.1.164.3.1.2.1.2 |
agnSTimeCmdThis entry indicates the current time as it is known by the
agent using its own real-time clock.
This parameter can be set for time synchronization between
the NMS and the Agent.rw DisplayString .1.3.6.1.4.1.164.3.1.2.1.3 |
agnSActiveCnfgThis entry specifies the unique identifier of the configuration,
that is currently active and running.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.4 |
agnSEditCnfgThis entry indicates the unique identifier of the
configuration that is currently loaded into the tmp working
space for manipulation and update operations. Value of 255
means no config. is under editing process.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.5 |
agnSLastCnfgFlipTimeThis entry indicates the Date & Time of the last flip to the
current configuration at the agent.ro DisplayString .1.3.6.1.4.1.164.3.1.2.1.6 |
agnSLastCnfgFlipCauseThis entry describes the flip's cause.ro DisplayString .1.3.6.1.4.1.164.3.1.2.1.7 |
agnSEditByThis entry indicates which MMI application is working on the
edited config.
The editing phase starts at the first modify operation and
ends after an update(load) operation.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.8 |
agnSClkSrcThis entry indicates the source of the system clock.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.9 |
agnSAlrStatusIndicates the alarm state in the agent level, i.e. lower
level (card/port) alarms not included.
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.10 |
agnSAlrStatusAllIndicates the alarm state of the entire agent, i.e.
including card and port alarms status.
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.11 |
agnSMaskedAlrStatIndicates the alarm state in the agent level,[ i.e. lower
level (card/port) alarms not included] including Masked
alarms.
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.12 |
agnSMaskedAlrStatAllIndicates the alarm state of the entire agent, i.e.
including card and port alarms status,including
Masked alarms.
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.13 |
agnSTstStatAllon(3) - when there is at least one test in progress in one
of the agent cards,
otherwise the value will be off(2).ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.14 |
agnSAlrTableList of agent related alarms and indications for alarms at
system level. SEQUENCE OF AgnSAlrEntry .1.3.6.1.4.1.164.3.1.2.1.15 |
agnSAlrEntry AgnSAlrEntry .1.3.6.1.4.1.164.3.1.2.1.15.1 |
agnSAlrIdxA unique number to identify an entry in the alarm status table
of the agent.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.15.1.1 |
agnSAlrCodeDescriptionThis attribute is a full text description of the alarm .
The alarm description includes the following information:
alarm code, alarm text, alarm severity, Masked or Inverted
flag and counter.ro DisplayString .1.3.6.1.4.1.164.3.1.2.1.15.1.2 |
agnSAlrCodeA code identifying the alarm of an entry in the alarm status
table at system level.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.15.1.3 |
agnSAlrSeverityThe severity of the alarm.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.15.1.4 |
agnSAlrStateState of the alarm.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.15.1.5 |
agnSAlrCounterA counter - how many times the alarm occured since last
clear operation.
ON and OFF Alarm will be counted separately.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.15.1.6 |
agnSAlrMaskAlarm mask : on/off.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.15.1.7 |
agnSAlrInvertAlarm invert : on/off.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.15.1.8 |
agnSClearAlrCmdSetting this attribute to ON, enforce a clear operation on
all the agent(general) events. General alarms are alarms
which are not specific to a card or port. The clear
operation will not be applied for masked/inverted alarms.rw Enumeration .1.3.6.1.4.1.164.3.1.2.1.16 |
agnSClearAllAlrCmdSetting this attribute to ON, enforce a clear operation on
all MUX alarm events at the levels of agent, slots and ports.
The clear operation will not be applied for masked/inverted
alarms.rw Enumeration .1.3.6.1.4.1.164.3.1.2.1.17 |
agnSSanityCheckStatusUpon completion of the Sanity check process on the TmpCnfg
this attribute will be set to:
FAIL(2) - when there is at least one error encountered and
possibly some warnings.
WARNING(3) - when there are only warnings.
otherwise, the value will be OK(4).
The value will be UNKNOWN(1) if changes were made in the
TmpCnfg following the last Sanity check.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.18 |
agnSNoOfSanityCheckErrThis entry indicates the number of errors/warnings discovered
by the last SanityCheck process.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.19 |
agnSErrListTableList of errors and warnings found during Sanity Check
process. SEQUENCE OF AgnSErrListEntry .1.3.6.1.4.1.164.3.1.2.1.20 |
agnSErrListEntry AgnSErrListEntry .1.3.6.1.4.1.164.3.1.2.1.20.1 |
agnSErrIdxUnique number to identify an entry in the error list table.
The maximum entry value cannot exceed the value of
'agnSNoOfSanityCheckErr'.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.20.1.1 |
agnSErrDescriptionThis attribute is a full text description of the sanity check
error including error code, slot and port numbers related to
the code .ro DisplayString .1.3.6.1.4.1.164.3.1.2.1.20.1.2 |
agnSMaxNoOfCnfgMaximum number of configurations that can be defined and
stored in the MUX.
If the mux has a large capacity, the maximum will be limited
to 254.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.21 |
agnSCnfgTableThis table contains an entry per configuration. It indicates
if the configuration is valid. SEQUENCE OF AgnSCnfgEntry .1.3.6.1.4.1.164.3.1.2.1.22 |
agnSCnfgEntry AgnSCnfgEntry .1.3.6.1.4.1.164.3.1.2.1.22.1 |
agnSEntryIdxUnique number to identify an entry in the configuration table.ro INTEGER .1.3.6.1.4.1.164.3.1.2.1.22.1.1 |
agnSEntryIsValidThis attribute indicates whether the specific configuration
is valid in the MUX . Value of NO indicates: no such
configuration in the MUX.ro Enumeration .1.3.6.1.4.1.164.3.1.2.1.22.1.2 |
cnfgAgnGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.2 |
agnCSanityCheckCmdSetting this attribute to on(3) will initiate the process
of Sanity check on the TmpCnfg. Upon completion the value
will automatically be changed to off(2).rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.1 |
agnCSaveCnfgIdxCmdThis attribute specifies the Id of the target RealCnfg to
which the TmpCnfg should be transferred. Upon set command the
MUX will initiate the Sanity-Check process first. If
successful, the actual transfer will be performed. If warnings
are detected, the user will have to perform the command again
to confirm the operation. Setting this object a second time
to the same value without performing any change in the database,
will cause the result: agnSSanityCheckStatus = unknownrw INTEGER .1.3.6.1.4.1.164.3.1.2.2.2 |
agnCLoadCnfgIdxCmdThis attribute specifies the Id of the source Cnfg to be
loaded into the TmpCnfg. Upon set operation the actual
transfer will be initiated.
The operation is valid only on Valid configurations
(agnSEntryIsValid)rw INTEGER .1.3.6.1.4.1.164.3.1.2.2.3 |
agnCClkSrcTableAll the entries of this table are identical (have the same
value) for all the configurations (1..100) except the
TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry. SEQUENCE OF AgnCClkSrcEntry .1.3.6.1.4.1.164.3.1.2.2.4 |
agnCClkSrcEntry AgnCClkSrcEntry .1.3.6.1.4.1.164.3.1.2.2.4.1 |
agnCClkCnfgIdxThis attribute indicates the Idx of the Cnfg(1..100) being
accessed and Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.2.2.4.1.1 |
agnCClkSrcIdxAn index to the table. There are only two entries to this
table.
Index 1 points to the Master clock parameters and Index 2
points to the Fallback clock parametersro INTEGER .1.3.6.1.4.1.164.3.1.2.2.4.1.2 |
agnCClkSrcModeThe source of the nodal timing.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.4.1.3 |
agnCClkSrcSltThis entry is valid only when we are working in rxClk mode.
For an invalid entry, the return value will be '7fff'h.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.4.1.4 |
agnCClkSrcPrtThis entry is valid only when we are working in rxClk mode.
For an invalid entry, the return value will be '7fff'h.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.4.1.5 |
agnCDeleteCnfgIdxCmdSetting this attribute will delete the requested DB
from the NVRAM .rw INTEGER .1.3.6.1.4.1.164.3.1.2.2.5 |
agnCDefaultCnfgIdxCmdSetting this attribute will define the desired working
configuration when no conditions of the Flip DB Table are
fulfilled and no Net GO command was issued. This command
will be accepted only if the Configuration number exists
(agnSEntryIsValid=yes).rw INTEGER .1.3.6.1.4.1.164.3.1.2.2.6 |
agnCnfgDataTableThis table contains data about the agent configurations.
The table will support only data about valid configurations
of the agent. SEQUENCE OF AgnCnfgDataEntry .1.3.6.1.4.1.164.3.1.2.2.7 |
agnCnfgDataEntry AgnCnfgDataEntry .1.3.6.1.4.1.164.3.1.2.2.7.1 |
agnCnfgIdxThis object indicates the Idx of the agent' Cnfg the following
objects refer.
255=Temporary Cnfg (Set is done only to this configuration).ro INTEGER .1.3.6.1.4.1.164.3.1.2.2.7.1.1 |
agnCnfgDescThis object is a description of the Configuration, entered
by user, to enhance Cnfg recognition.rw DisplayString .1.3.6.1.4.1.164.3.1.2.2.7.1.2 |
agnCnfgUpdDateThis object indicates the date when last update of this
configuration was performed, as it is known by the
agent using its own real-time clock. The format would be as
specified by the agnSDateFormat.
When update is performed, the agent should save the date.ro DisplayString .1.3.6.1.4.1.164.3.1.2.2.7.1.3 |
agnCnfgUpdTimeThis object indicates the time when last update of this
configuration was performed, as it is known by the
agent using its own real-time clock.
When update is performed, the agent should save the time.ro DisplayString .1.3.6.1.4.1.164.3.1.2.2.7.1.4 |
agnCnfgUpdMngerThis object indicates the IP Address of the Manager who
performed the last update of this configuration.
When update is performed, the agent should save the
IP Address of the Manager who commanded the update.
That will enable a manager to know if he performed the last
update, or another manager did.ro IpAddress .1.3.6.1.4.1.164.3.1.2.2.7.1.5 |
agnCnfgAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.2.8 |
agnCnfgAlrFilterWindowWindow of time, in minutes.
During this Window, the alarms filter is performed.
Same Window for all agent alarms that need filtering.
Upon end of the Window, the state of the alarm is updated
and a new Window starts.
If no alarm needs filtering, this object's value will not be
used.rw INTEGER .1.3.6.1.4.1.164.3.1.2.2.8.1 |
agnCnfgAlrTableThis table enables the user to set attributes to each alarm.
Setting for a non-existing entry agnCnfgAlrMask,
agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or yesAndSave
for Mask) will add this new entry to the table.
Setting for an existing entry agnCnfgAlrMask/
agnCnfgAlrInvert/agnCnfgAlrFilter (one or more) to 'no'
(noAndSave for Mask) so that ALL these objects' values are
'no' , will delete this entry from the table.
For agnCnfgAlrMask, only if [(last saved value=noAndSave)
AND (new value is 'no' or 'noAndSave')] the object's value
is considered 'no' for deleting the entry. SEQUENCE OF AgnCnfgAlrEntry .1.3.6.1.4.1.164.3.1.2.2.8.2 |
agnCnfgAlrEntry AgnCnfgAlrEntry .1.3.6.1.4.1.164.3.1.2.2.8.2.1 |
agnCnfgAlrCodeThe alarm code. The following attributes refer this code.ro INTEGER .1.3.6.1.4.1.164.3.1.2.2.8.2.1.1 |
agnCnfgAlrSlotThe alarm slot. The following attributes apply for the alarm
code and slot selected.
all = the attributes apply to all slots.
notApplicable = the selected alarm is for system level.ro Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.2.1.2 |
agnCnfgAlrPortThe alarm port. The following attributes apply for the alarm
code,slot and port selected.
200 = all = the attributes apply to all ports of the selected slot.
When selected Slot is 'all', only 'all' or 'notApplicable' are valid
Port selections.
notApplicable = the selected alarm is for system or card
level.
=255 for MP
=100 for DXC
- For MP, valid cards' ports are: exPrt1(1)..exPrt12(12)
inPrt1(101)..inPrt48 (148)
- For DXC, the port index will include the Slot, as for all DXC
tables: [(IO Slot+10)&n] ; n=odd for external ports
n=even for internal ports.ro INTEGER .1.3.6.1.4.1.164.3.1.2.2.8.2.1.3 |
agnCnfgAlrMaskAn attribute defining the desired Mask state of an alarm .
no - unmask (this command is not saved in agent's common
database)
noAndSave - unmask ; this command is saved in agent's
common database
yes - mask (this command is not saved in agent's
common database)
yesAndSave - mask ; this command is saved in
agent's common database.
Commands that are not saved, will be lost upon power-up or
selected card removal.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.2.1.4 |
agnCnfgAlrInvertAn attribute defining the desired Invert state of an alarm .
no - not inverted.
yes - inverted. For MP, it is not applicable for alarms
that are currently OFF.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.2.1.5 |
agnCnfgAlrFilterAn attribute defining if Filter is desired for the alarm .
no - no filter.
yes - filter activate.
This filter is activated within a window of time defined by
agnCnfgAlrFilterWindow.
Its purpose is to avoid frequent changes of an alarm between
ON/OFF states.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.2.1.6 |
agnCnfgAlrFilterSetThis is a top threshold causing the alarm that passes it,
to be declared Set (ON) at the end of the respective
window of time.
- For alarms defined by default as state alarms (minor,major)
this value will be in [%].
- For alarms defined by default as events, this value will be
an integer meaning how many times this event should appear
at least, during the window in order to be considered ON.
The maximum valuewill be 255.
This value should be greater than the one of
agnCnfgAlrFilterReset.
Agents that do not support Alarms Filter, will return 0.rw INTEGER .1.3.6.1.4.1.164.3.1.2.2.8.2.1.7 |
agnCnfgAlrFilterResetThis is a bottom threshold causing the alarm that does not
pass it, to be declared Reset (ON) at the end of the
respective window of time.
- For alarms defined by default as state alarms (minor,major)
this value will be in [%].
- For alarms defined by default as events, this value will be
an integer meaning how many times this event should appear
at most, during the window, in order to be considered OFF.
This value should be less than the one of
agnCnfgAlrFilterSet.
Agents that do not support Alarms Filter, will return 0.rw INTEGER .1.3.6.1.4.1.164.3.1.2.2.8.2.1.8 |
agnCnfgAlrReportTableThis table enables the user to configure the desired Alarm
Reports according to alarms severity. SEQUENCE OF AgnCnfgAlrReportEntry .1.3.6.1.4.1.164.3.1.2.2.8.3 |
agnCnfgAlrReportEntry AgnCnfgAlrReportEntry .1.3.6.1.4.1.164.3.1.2.2.8.3.1 |
agnCnfgAlrReportTypeThe alarm report type.
trap - traps will be sent only for alarms having the
selected On/Off severity or higher.
buffer - only alarms having the selected On/Off severity and
higher, will be reported to the buffer.
relay - relay contact will be activated only for alarms
having the selected On severity or higher.
For products having 2 relays, this is the Minor Relay.
alrLedOn/alrLedBlink - user should select a higher severity
(ReportOn) for alrLedBlink than for alrLedOn
(Blinking Led means a more severe alarm than steady
ON Led).
alrLedOn - MTCL-1 Alarm Led will be ON only when
agnSAlrStatusAll equals the selected severity or
higher, but lower severity than that selected for
'alrLedBlink'.
For products having 2 LEDs, this is the Minor LED.
alrLedBlink - MTCL-1 Alarm Led will Blink only when
agnSAlrStatusAll equals the selected severity or
higher.
For products having 2 LEDs, this is the Major LED.
relay2 - relay 2 contact will be activated only for alarms
having the selected On severity or higher.
This is the Major Relay.ro Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.3.1.1 |
agnCnfgAlrStartReportOnThis object specifies the severity from which alarms will
be reported. Alarms having this severity or higher, will be
reported.
This object specifies the report severity only for alarms
that turn to ON state.
noReport - no Report at all (for any severity).rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.3.1.2 |
agnCnfgAlrStartReportOffThis object specifies the severity from which alarms will
be reported. Alarms having this severity or higher, will be
reported.
This object specifies the report severity only for alarms
that turn to OFF state.
notApplicable - for 'relay','alrLedOn','alrLedBlink', 'relay2' report
types, in MP.
noReport - no Report at all (for any severity).rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.8.3.1.3 |
agnCOffsetCmdAn object defining special user request.
notApplicable - is RO value for products that do not support this object.
normal - nothing special
u1 - user 1 - for all Voice cards, the DISPLAYED Tx and Rx Levels
will have the following Offsets:
- 2 Wires port: Tx Level: the base value (for 0dBm) = 0
Rx Level: the base value (for 0dBm) = -2
- 4 Wires port: Tx Level: the base value (for 0dBm) = -16
Rx Level: the base value (for 0dBm) = 7
The MIB and application DB will use the values without Offset.rw Enumeration .1.3.6.1.4.1.164.3.1.2.2.9 |
cmprAgnGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.3 |
agnCmprTable SEQUENCE OF AgnCmprEntry .1.3.6.1.4.1.164.3.1.2.3.1 |
agnCmprEntry AgnCmprEntry .1.3.6.1.4.1.164.3.1.2.3.1.1 |
agnCmprTypIdxThis attribute indicates the Type of the Compressed being
referred.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.1.1.1 |
agnCmprCnfgIdxThis attribute indicates the configuration to which the
Compressed information is related.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.1.1.2 |
agnCmprVersionThis attribute indicates the version of the internal format
of the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.2.3.1.1.3 |
agnCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.1.1.4 |
agnDlciCmprTable SEQUENCE OF AgnDlciCmprEntry .1.3.6.1.4.1.164.3.1.2.3.2 |
agnDlciCmprEntry AgnDlciCmprEntry .1.3.6.1.4.1.164.3.1.2.3.2.1 |
agnDlciCmprCnfgIdxThis attribute indicates the configuration to which the
Compressed information is related.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.2.1.1 |
agnDlciCmprVersionThis attribute indicates the version of the internal format
of the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.2.3.2.1.2 |
agnDlciCmprDlciIdxThis attribute indicates a unique identifier of the Dlci,
the compressed information relates to.
The values are between 16 - 991.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.2.1.3 |
agnDlciCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.2.1.4 |
agnAlarmsCmprTable SEQUENCE OF AgnAlarmsCmprEntry .1.3.6.1.4.1.164.3.1.2.3.3 |
agnAlarmsCmprEntry AgnAlarmsCmprEntry .1.3.6.1.4.1.164.3.1.2.3.3.1 |
agnAlarmsCmprVersionThis attribute indicates the version of the internal
format of the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.2.3.3.1.1 |
agnAlarmsCmprAlarmIdxA unique number to identify an entry in the alarm status table
of the agent.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.3.1.2 |
agnAlarmsCmprObjThis attribute is the compressed information itself.ro OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.3.1.3 |
agnAlrBufCmprTable SEQUENCE OF AgnAlrBufCmprEntry .1.3.6.1.4.1.164.3.1.2.3.4 |
agnAlrBufCmprEntry AgnAlrBufCmprEntry .1.3.6.1.4.1.164.3.1.2.3.4.1 |
agnAlrBufCmprVersionThis attribute indicates the version of the internal format of
the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.2.3.4.1.1 |
agnAlrBufCmprAlarmIdxA unique number to identify an entry in the history alarms
buffer of the agent.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.4.1.2 |
agnAlrBufCmprObjThis attribute is the compressed information itself.ro OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.4.1.3 |
agnSCmprErrListTable SEQUENCE OF AgnSCmprErrListEntry .1.3.6.1.4.1.164.3.1.2.3.5 |
agnSCmprErrListEntry AgnSCmprErrListEntry .1.3.6.1.4.1.164.3.1.2.3.5.1 |
agnSCmprErrVersionThe version of the compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.2.3.5.1.1 |
agnSCmprErrIdxUnique number to identify an entry in the errors list table.
The maximum entry value cannot exceed the value of
'agnSNoOfSanityCheckErr'.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.5.1.2 |
agnSCmprErrObjThis attribute is a full text description of the error,
including: error code, slot and port numbers related to the
code .ro OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.5.1.3 |
agnTsCmprTable SEQUENCE OF AgnTsCmprEntry .1.3.6.1.4.1.164.3.1.2.3.6 |
agnTsCmprEntry AgnTsCmprEntry .1.3.6.1.4.1.164.3.1.2.3.6.1 |
agnTsCmprVerIdxThis object indicates the version of the internal format
of the Compressed data.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.6.1.1 |
agnTsCmprCnfgIdxThis object indicates the configuration to which the
Compressed information is related.
255=temporary configuration.
Set can be performed only to the temporary configuration.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.6.1.2 |
agnTsCmprSlotIdxThis object indicates the Slot to which the
Compressed information is related.
For MP-2100: IO-1..IO-12 = (5).. (16)
For DXC-30 : IO-1..IO-15 = (5).. (19).ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.6.1.3 |
agnTsCmprPortIdxThis object indicates the Port within the Slot, to which the
Compressed information is related.
For Port Index see each product's spec.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.6.1.4 |
agnTsCmprPduIdxThis object indicates the PDU index within the same port.
That provides for the case when one PDU is not sufficient for all TS
Assignment data of the same port.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.6.1.5 |
agnTsCmprDataThis object is the compressed information itself. It provides
information about all TSs of a port.rw OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.6.1.6 |
agnXCmprTable SEQUENCE OF AgnXCmprEntry .1.3.6.1.4.1.164.3.1.2.3.7 |
agnXCmprEntry AgnXCmprEntry .1.3.6.1.4.1.164.3.1.2.3.7.1 |
agnXCmprTypIdxThis attribute indicates the Type of the Compressed being
referred.
One of the types is V5.1 Variant data.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.1 |
agnXCmprVersionThis attribute indicates the version of the internal format of
the Compressed data.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.2 |
agnXCmprIdx33rd index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant, this attribute indicates the configuration
to which the Compressed information is related.
255=temporary configuration.
Set can be performed only to the temporary configuration.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.3 |
agnXCmprIdx44th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute indicates a unique number of
the slot position where the card is inserted.
Valid values: psA(1),psB(2),clA(3),clB(4),io1(5)..io12(16); notApplicable=255.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.4 |
agnXCmprIdx55th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute indicates a unique identifier
of the port the compressed information relates to.
Valid values: exPrt1 (1) .. exPrt12 (12) ,
inPrt1 (101) .. inPrt48 (148).ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.5 |
agnXCmprIdx66th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute indicates the Variant index.
Valid values are: 0..127, 255 (= temp cnfg).Set can be performed only
to the temporary configuration.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.6 |
agnXCmprIdx77th index - can be used for any purpose according to the
agnXCmprTypIdx.
Example: for V5.1 Variant,this attribute is not needed. Therefore, its
value will be always 255=notApplicable.ro INTEGER .1.3.6.1.4.1.164.3.1.2.3.7.1.7 |
agnXCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.2.3.7.1.8 |
alrBuffGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.4 |
alrBufTable SEQUENCE OF AlrBufEntry .1.3.6.1.4.1.164.3.1.2.4.1 |
alrBufEntry AlrBufEntry .1.3.6.1.4.1.164.3.1.2.4.1.1 |
alrBufIdxThis attribute indicates a unique number to identify this
entryro INTEGER .1.3.6.1.4.1.164.3.1.2.4.1.1.1 |
alrBufDescriptionThis entry is a unique text description of the alarm in the
buffer.
The alarm description includes the following information:
alarm code, slot id, card type, channel id ,
alarm text, alarm status, masked flag and event counterro DisplayString .1.3.6.1.4.1.164.3.1.2.4.1.1.2 |
agnFlipDb OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.5 |
agnCAgendaTableThis table devides the week days into categories needed for
DB flip consideration. SEQUENCE OF AgnCAgendaEntry .1.3.6.1.4.1.164.3.1.2.5.1 |
agnCAgendaEntry AgnCAgendaEntry .1.3.6.1.4.1.164.3.1.2.5.1.1 |
agnCAgendaCnfgIdxActive or Temporary Agenda Table.
Both configurations can be read but only the Temporary can
be written to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.5.1.1.1 |
agnCAgendaDayIdxDay of weekro Enumeration .1.3.6.1.4.1.164.3.1.2.5.1.1.2 |
agnCAgendaDayCategoryThe Category of the Dayrw Enumeration .1.3.6.1.4.1.164.3.1.2.5.1.1.3 |
agnCFlipNetEventsTableThis table holds the Net Events the MUX should trace SEQUENCE OF AgnCFlipNetEventsEntry .1.3.6.1.4.1.164.3.1.2.5.2 |
agnCFlipNetEventsEntry AgnCFlipNetEventsEntry .1.3.6.1.4.1.164.3.1.2.5.2.1 |
agnCFlipNetEventsCnfgIdxActive or Temporary Net Events Table.
Both configurations can be read but only the Temporary can
be written to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.5.2.1.1 |
agnCFlipNetEventIdxEntry within the tablero INTEGER .1.3.6.1.4.1.164.3.1.2.5.2.1.2 |
agnCFlipNetEventActiveIndicates if the entry is valid.
In order to Add/Modify parameters of an entry, this object
should be set to Yes.
In order to delete an entry, this object should be Set to No.rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.2.1.3 |
agnCFlipNetEventTypeThe Net Event typerw Enumeration .1.3.6.1.4.1.164.3.1.2.5.2.1.4 |
agnCFlipNetEventNoThe Net Event No. (Bit Index)rw INTEGER .1.3.6.1.4.1.164.3.1.2.5.2.1.5 |
agnCFlipNetEventSlotThe slot to which the net event relates .
Not applicable for time eventrw Enumeration .1.3.6.1.4.1.164.3.1.2.5.2.1.6 |
agnCFlipNetEventPortThe port within the relevant slotrw Enumeration .1.3.6.1.4.1.164.3.1.2.5.2.1.7 |
agnCFlipNetEventISDThe time in seconds since the Net Event was reported as ON
until it is considered as ON.
Not relevant for time events.rw INTEGER .1.3.6.1.4.1.164.3.1.2.5.2.1.8 |
agnCFlipNetEventOSDThe time in seconds since the net event was reported as OFF
until it is considered as OFF.
Not relevant for time events.rw INTEGER .1.3.6.1.4.1.164.3.1.2.5.2.1.9 |
agnCFlipNetEventDayTypeThe time event relates to all days defined in this category in
the agnCAgendaTable.
Applicable only for time eventrw Enumeration .1.3.6.1.4.1.164.3.1.2.5.2.1.10 |
agnCFlipNetEventStartTimeThe time event will be activated at this time.
The format is hh:mm.rw DisplayString .1.3.6.1.4.1.164.3.1.2.5.2.1.11 |
agnCFlipNetEventEndTimeThe time event will be deactivated at this time.
The format is hh:mm.rw DisplayString .1.3.6.1.4.1.164.3.1.2.5.2.1.12 |
agnCFlipTableThe DB Flip Decisions Table SEQUENCE OF AgnCFlipEntry .1.3.6.1.4.1.164.3.1.2.5.3 |
agnCFlipEntry AgnCFlipEntry .1.3.6.1.4.1.164.3.1.2.5.3.1 |
agnCFlipCnfgIdxActive or Temporary Flip Decisions Table.
Both configurations can be read but only the Temporary can
be written to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.5.3.1.1 |
agnCFlipIdxEntry number within the tablero INTEGER .1.3.6.1.4.1.164.3.1.2.5.3.1.2 |
agnCFlipActiveIndicates if the entry is valid.
In order to Add/Modify parameters of an entry this object
should be Set to Yes.
In order to delete an entry, this object should be Set to No.rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.3.1.3 |
agnCFlipLogicalExpA logical expression composed of events numbers (which were
configured in the 'AgnCFlipNetEvantsTable') and logical operators
('|', '&', '!', '(', ')') between them.
e.g - (1 & !2) | (121 & 230)rw DisplayString .1.3.6.1.4.1.164.3.1.2.5.3.1.4 |
agnCFlipDbNoThe ID of the required DBrw INTEGER .1.3.6.1.4.1.164.3.1.2.5.3.1.5 |
agnCFlipDiscardDeIndicates whether the Mux should start discarding
all DE. (MP3000 Only).rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.3.1.6 |
agnFlipDbControls OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.5.4 |
agnCFlipDbSanityCheckCmdSetting this attribute to on(3) will initiate the process
of Sanity check on the Temp Flip Db and automatically be
changed to off(2).rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.4.1 |
agnCSaveFlipDbCmdSetting this attribute to on(3) will initiate the process
of Sanity check on the Temp Flip Db and if it is OK, it will
save the Flip Db in the NVRAM, activating the new Flip DB .
If check detects errors, the save will not be performed.
Afterwards, the object's value will change automatically to off(2).rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.4.2 |
agnCSaveNetCnfgIdxCmdThis attribute specifies the Id of the target NVRAM Cnfg to
which the TmpCnfg should be transferred. Upon set command the
MUX will initiate the Sanity-Check process first. If
successful, the actual transfer will be performed. If warnings
are detected, the user will have to perform the command again
to confirm the operation. Setting this object a second time
to the same value without performing any change in the database,
will cause the result: agnSSanityCheckStatus = unknown.
This attribute doesn't cause actual Flip.rw INTEGER .1.3.6.1.4.1.164.3.1.2.5.4.3 |
agnCSaveNetFlipDbCmdSetting this attribute to on(3) will save the Temp Flip DB
Into the NVRAM without actual flip.rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.4.4 |
agnCNetGoCmdSetting this attribute to On will broadcast a 'GO' command
to the network. When a Mux receives a 'GO' command it issues
a delay for 'agnCNetDelay' seconds and then activates
the DB which was pre-defined by one of the commands :
'agnCSaveNetCnfgIdxCmd' or 'agnCSaveNetFlipDbCmd'.rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.4.5 |
agnCNetDelayThis attribute determines the period of time in seconds that
takes for a message to be transferred over all the network.
After a 'GO' command the MUX issues a delay of
'agnCNetDelay' before activating the appropriate DB.
The delay will be applied only after performing
agnCSaveFlipDbCmd.rw INTEGER .1.3.6.1.4.1.164.3.1.2.5.4.6 |
agnCNetEventsBcastThis object determines if the Net Events will be Broadcasted to
other Muxes of the Net or not.
disabled - Net Events will NOT be Broadcasted
enabled - Net Events will be Broadcasted.
Default=disabled.
The value will be applied only after performing
agnCSaveFlipDbCmd.rw Enumeration .1.3.6.1.4.1.164.3.1.2.5.4.7 |
agnCNetEventsBcastIntervalWhen agnCNetEventsBcast is enabled, this object determines
the interval of time in seconds, between two consecutive
Net Events transferred over the network.
Default=40 sec.
The interval will be applied only after performing
agnCSaveFlipDbCmd.rw INTEGER .1.3.6.1.4.1.164.3.1.2.5.4.8 |
agnSa OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.6 |
agnSaSwchStatusThis object indicates the status of the switches on the
stand-alone unit.
Each switch is represented by a bit. The status is a sum of
2**n, according to the bits:
bit 0 NMS (LSB)
bit 1 Terminal '1' = forces the DCE to be terminal with
Rate=9600bps, Data bits=8,
Stop bits=1
bit 2 Xray
bit 3 SW-Load '1' = when SW is loaded
bit 4 DBS
Default of all bits=0
When the status of these switches is unknown, the value of
this object is 255.ro INTEGER .1.3.6.1.4.1.164.3.1.2.6.1 |
agnListDecoding OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.7 |
agnListDecodingTableA decoding table . For each type of list, a description is
given for each existing code. SEQUENCE OF AgnListDecodingEntry .1.3.6.1.4.1.164.3.1.2.7.1 |
agnListDecodingEntry AgnListDecodingEntry .1.3.6.1.4.1.164.3.1.2.7.1.1 |
agnListDecodingTypeThe type of list the decoding data refers to.
alr - Alarms list
sanity - Sanity Check Error list.ro Enumeration .1.3.6.1.4.1.164.3.1.2.7.1.1.1 |
agnListDecodingCodeThe specific code for which decoding is needed.ro INTEGER .1.3.6.1.4.1.164.3.1.2.7.1.1.2 |
agnListDecodingDescriptionThe description fitting the specific code and type of list
required.ro DisplayString .1.3.6.1.4.1.164.3.1.2.7.1.1.3 |
agnListDecodingDefStateThis object is applicable only for agnListDecodingType=alr.
It reports the default state/severity of each alarm.
User can change the severity of the alarms defined by
this default via the agnListDecodingSeverity object.ro Enumeration .1.3.6.1.4.1.164.3.1.2.7.1.1.4 |
agnListDecodingSeverityThis object is applicable only for agnListDecodingType=alr.
It enables the user to select a severity for each alarm.
The severity is set per alarm code (same for all slots/ports
using this code).
event - can be set only for an alarm that is defined by
default as 'event'.
User can change the severity of the alarms defined by
default as minor or major.
The severity of an event may be set to another severity,
but the change will actually happen only if the event
threshold is active and passed the Set/ON condition.
An event alarm that passed the threshold and changed its
severity, will return automatically to event severity when
meeting its Reset/OFF condition.rw Enumeration .1.3.6.1.4.1.164.3.1.2.7.1.1.5 |
agnListDecodingAcmRelaySltThis object indicates the ACM slot, desired for outbound relay
(report) for the selected alarm.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
none - when agnListDecodingType=alr AND the selected
alarm should not be reported by an ACM card.
notApplicable - when agnListDecodingType=sanity OR when
[agnListDecodingType=alr and there is no ACM card installed in the Mux].rw Enumeration .1.3.6.1.4.1.164.3.1.2.7.1.1.6 |
agnListDecodingAcmRelayPrtThis object indicates the ACM port within the slot, desired for outbound relay
(report) for the selected alarm.
notApplicable - when agnListDecodingType=sanity OR when
agnListDecodingAcmRelaySlt=notApplicable.rw Enumeration .1.3.6.1.4.1.164.3.1.2.7.1.1.7 |
agnSystemDlci OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.8 |
agnDlciTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF AgnDlciEntry .1.3.6.1.4.1.164.3.1.2.8.1 |
agnDlciEntry AgnDlciEntry .1.3.6.1.4.1.164.3.1.2.8.1.1 |
agnDlciCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.2.8.1.1.1 |
agnDlciLSltIdxThis attribute indicates a unique slot position where
the card is inserted.
vs=Voice Switching
In the ?004 Unit the entries io6(10)..io16) are not valid.
For ISDN BRI ports of MX300/30 units:
io1(5) = isdn1(5) and io2(6) = isdn2(6)
LSlotIdx is defined according one of the following possiblities:
1. LSlotIdx is < HSlotIdx.
2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx.
3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.ro Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.2 |
agnDlciLPrtIdxThis attribute indicates a unique external or internal port number,
including linkSelector or encapsulator.
100=noConnect (for voice switching)
LPrtIdx is defined according one of the following possiblities:
1. LSlotIdx is < HSlotIdx.
2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx.
3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.ro INTEGER .1.3.6.1.4.1.164.3.1.2.8.1.1.3 |
agnDlciLIdxThis attribute indicates a unique index for each possible
used dlci(16..991).
0=notApplicable (for voice switching)
LIdx is defined according one of the following possiblities:
1. LSlotIdx is < HSlotIdx.
2. LSlotIdx is = HSlotIdx and LPrtIdx is < HPrtIdx.
3. LSlotIdx is = HSlotIdx and LPrtIdx is = HPrtIdx but LIdx is < HIdx.ro INTEGER .1.3.6.1.4.1.164.3.1.2.8.1.1.4 |
agnDlciHSltIdxThis attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to.
For ISDN BRI ports of MX300/30 units:
io1(5) = isdn1(5) and io2(6) = isdn2(6)
In the ?004 Unit the entries io6(10)..io16) are not validro Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.5 |
agnDlciHPrtIdxThis attribute indicates a unique port id which the dlci is
routed to.ro INTEGER .1.3.6.1.4.1.164.3.1.2.8.1.1.6 |
agnDlciHIdxThis attribute indicates a unique internal connection dlci
number which the src dlci is routed to.ro INTEGER .1.3.6.1.4.1.164.3.1.2.8.1.1.7 |
agnDlciTxBcThis attribute indicates a unique Tx committed bandwidth on
the user transmit line or at the port receive line.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.8 |
agnDlciTxBeThis attribute indicates a unique Tx excess bandwidth on the
user transmit line or at the port receive line.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.9 |
agnDlciRxBcThis attribute indicates a unique Rx committed bandwidth on
the user receive line or at the port transmit line.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.10 |
agnDlciRxBeThis attribute indicates a unique Rx excess bandwidth on the
user receive line or at the port transmit line.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.11 |
agnDlciPriorityThis attribute indicates a unique priority of the pcv.
1 is the lowest priority and 7 is the highest priority.rw INTEGER .1.3.6.1.4.1.164.3.1.2.8.1.1.12 |
agnDlciStatusThis attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as
not connectedro Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.13 |
agnDlciSpoofingThis object refers to sending of RIP messages:
- yes : RIP messages will be sent ONLY if there is a change in the Net.
- no : RIP messages will be always sent.
This object is relevant only when one side of the DLCI is a CL-NMS interface.
Default=no.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.14 |
agnDlciFunnelEnableThis object selects Funnel activation enable/disable:
- disabled: Funnel operation disabled. The agnDlciTxBe and agnDlciTxBc
values are not used for funneling.
- enabled : Funnel operation enabled. The agnDlciTxBe and agnDlciTxBc
values are used for funneling calculations.
This object is relevant only for an encapsulating DLCI.
In case of a Link Selector DLCI, the agnDlciTxBe and agnDlciTxBc
values are used for bandwidth of Link Selector.
Default=disabled.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.15 |
agnDlciRoutingProtocolThis object is relevant only when one side of the DLCI is a CL-NMS interface.
It defines which Routing Protocol will be used for management via CL-NMS port.
notApplicable will be used for all slots but CL.
rip is a proprietary rip protocol.
Default=rip.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.16 |
agnDlciRowStatusThis attribute allows to create/delete a row in this table.
For creating a row, the NMS should set
agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1).
For destroying a row, the NMS should set:
agnRowStatus.255.id2.id3.id4.id5.id6.id7 = destroy(6).
Only rows with status active(1) are relevant.rw Enumeration .1.3.6.1.4.1.164.3.1.2.8.1.1.17 |
agnVoiceSwitching OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.9 |
agnVoiceSwConfTableMXcess Configuration for Voice Switching. SEQUENCE OF AgnVoiceSwConfEntry .1.3.6.1.4.1.164.3.1.2.9.1 |
agnVoiceSwConfEntry AgnVoiceSwConfEntry .1.3.6.1.4.1.164.3.1.2.9.1.1 |
agnVoiceSwConfIdxActive or Temporary Table.
Both configurations can be read but only the Temporary can
be written to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.9.1.1.1 |
agnVoiceSwConfZoneId1 or 2 digits, (0-9)(1-9).rw DisplayString .1.3.6.1.4.1.164.3.1.2.9.1.1.2 |
agnVoiceSwConfNodeId1, 2 or 3 digits, (1-9),(0-9),(0-9).rw DisplayString .1.3.6.1.4.1.164.3.1.2.9.1.1.3 |
agnVoiceSwConfNoOfHopsNumber of hops the frame will go through the net before deciding to discard
the frame (like time-to-live in IP).
0 = notApplicable
Default=20 .rw INTEGER .1.3.6.1.4.1.164.3.1.2.9.1.1.4 |
agnVoiceSwConfRtTableRouting Table for Voice Switching. SEQUENCE OF AgnVoiceSwConfRtEntry .1.3.6.1.4.1.164.3.1.2.9.2 |
agnVoiceSwConfRtEntry AgnVoiceSwConfRtEntry .1.3.6.1.4.1.164.3.1.2.9.2.1 |
agnVoiceSwConfRtDbIdActive or Temporary Table.
Both configurations can be read but only the Temporary can
be written to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.9.2.1.1 |
agnVoiceSwConfRtIdxThe Index of the row.ro INTEGER .1.3.6.1.4.1.164.3.1.2.9.2.1.2 |
agnVoiceSwConfRtDigitsSerie of digits or keyword 'ELSE'..rw DisplayString ( SIZE .1.3.6.1.4.1.164.3.1.2.9.2.1.3 |
agnVoiceSwConfRtActionAction that the system should perform for this digits:
agnVoiceSwConfRtDigits.rw Enumeration .1.3.6.1.4.1.164.3.1.2.9.2.1.4 |
agnVoiceSwConfRtDataThis field is relevant for actions hgr(6), del(7) and rep(8).rw DisplayString .1.3.6.1.4.1.164.3.1.2.9.2.1.5 |
agnVoiceSwConfRtSlotRouting Slot- Relevant for actions zone(2) and node(3).rw Enumeration .1.3.6.1.4.1.164.3.1.2.9.2.1.6 |
agnVoiceSwConfRtPortRouting Port- Relevant for actions zone(2) and node(3).
100=noConnect (for non-routing case).rw INTEGER .1.3.6.1.4.1.164.3.1.2.9.2.1.7 |
agnVoiceSwConfRtDlciRouting DLCI- Relevant for actions zone(2) and node(3).
Valid values:
0=notApplicable (for non-routing case).
1, 16..991rw INTEGER .1.3.6.1.4.1.164.3.1.2.9.2.1.8 |
agnVoiceSwConfRtRowStatusStatus of the row for creating/deleting entries in
the table.rw Enumeration .1.3.6.1.4.1.164.3.1.2.9.2.1.9 |
agnVoiceSwConfHGTableTable of Hunt Groups. SEQUENCE OF AgnVoiceSwConfHGEntry .1.3.6.1.4.1.164.3.1.2.9.5 |
agnVoiceSwConfHGEntry AgnVoiceSwConfHGEntry .1.3.6.1.4.1.164.3.1.2.9.5.1 |
agnVoiceSwConfHGdbIdxActive or Temporary Table.
Both configurations can be read but only the Temporary can
be written to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.9.5.1.1 |
agnVoiceSwConfHGIdxThere may be up to 10 Hunt Groups per MXcess. That's the
index of the hunt group relevant to this row.ro INTEGER .1.3.6.1.4.1.164.3.1.2.9.5.1.2 |
agnVoiceSwConfHGConnectThis attribute indicates whether the hunt group should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.1.2.9.5.1.3 |
agnVoiceSwConfHGExtThis is the extension number of the hunt group.
0 is for not valid. The allowed range is 10 - 99.rw INTEGER .1.3.6.1.4.1.164.3.1.2.9.5.1.4 |
agnSigProfile OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.10 |
agnSigProfileTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF AgnSigProfileEntry .1.3.6.1.4.1.164.3.1.2.10.1 |
agnSigProfileEntry AgnSigProfileEntry .1.3.6.1.4.1.164.3.1.2.10.1.1 |
agnSigProfileCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.
The write operation is valid only to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.2.10.1.1.1 |
agnSigProfileIdxThis attribute indicates the Signaling Profile (1..5).ro INTEGER .1.3.6.1.4.1.164.3.1.2.10.1.1.2 |
agnSigProfileRxTxThis attribute indicates if the following objects refer to:
Rx or Tx translation.
Rx : ML->IO
Tx : IO->ML .ro Enumeration .1.3.6.1.4.1.164.3.1.2.10.1.1.3 |
agnSigProfileABCDThis object represents 6 parameters, by 3 Octets :
Busy Code-MSB nibble, - applicable only for Rx translation
Idle Code- nibble, - applicable only for Rx translation
D Bit Code- nibble,
C Bit Code- nibble,
B Bit Code- nibble,
A Bit Code-LSB nibble.
Each of Busy and Idle Code nibble will have the valid values:
0000 .. FFFF.
Each of A,B,C,D Bit Code nibble represents:
0 hex = 0000 = 0
1 hex = 0001 = 1
2 hex = 0010 = A bit
3 hex = 0011 = B bit
4 hex = 0100 = C bit
5 hex = 0101 = D bit
6 hex = 0110 = A bit inverse
7 hex = 0111 = B bit inverse
8 hex = 1000 = C bit inverse
9 hex = 1001 = D bit inverse
A-F hex - not used (invalid values)rw OCTET STRING .1.3.6.1.4.1.164.3.1.2.10.1.1.4 |
agnSystemTs OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.2.11 |
agnTsTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF AgnTsEntry .1.3.6.1.4.1.164.3.1.2.11.1 |
agnTsEntry AgnTsEntry .1.3.6.1.4.1.164.3.1.2.11.1.1 |
agnTsCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.2.11.1.1.1 |
agnTsSltIdxThis attribute indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.1.2.11.1.1.2 |
agnTsPrtIdxThis attribute indicates a unique external or internal port number.
For MP:
exPrt1 (1) ,
exPrt2 (2) ,
exPrt3 (3) ,
exPrt4 (4) ,
exPrt5 (5) ,
exPrt6 (6) ,
exPrt7 (7) ,
exPrt8 (8) ,
exPrt9 (9) ,
exPrt10 (10) ,
exPrt11 (11) ,
exPrt12 (12) ,
inPrt1 (101) ,
inPrt2 (102) ,
inPrt3 (103) ,
inPrt4 (104) ,
inPrt5 (105) ,
inPrt6 (106) ,
inPrt7 (107) ,
inPrt8 (108) ,
inPrt9 (109) ,
inPrt10 (110) ,
inPrt11 (111) ,
inPrt12 (112)ro INTEGER .1.3.6.1.4.1.164.3.1.2.11.1.1.3 |
agnTsIdxThis attribute indicates a unique index for TS (Time-Slot).
- for T1 ports - 1..24, Fbit(25)
- for E1 ports - 1..31
- for HDSL ports - 1..32 ; 32 will represent TS0.ro INTEGER .1.3.6.1.4.1.164.3.1.2.11.1.1.4 |
agnTsBitIdxThis attribute indicates a unique index for the Bit
of each TS (Time-Slot).
1..8 - Bit 1.. Bit 8
255 - notApplicable
This object is applicable only in Split Time-Slot cases.ro INTEGER .1.3.6.1.4.1.164.3.1.2.11.1.1.5 |
agnTsConSltIdxThis attribute indicates a unique slot position In the Mux
where the TS is routed to.ro Enumeration .1.3.6.1.4.1.164.3.1.2.11.1.1.6 |
agnTsConPrtIdxThis attribute indicates a unique port id the TS is
routed to.
notApplicable - when agnTsType=mng or spare
For MP:
exPrt1 (1) .. exPrt12 (12) ,
notApplicable(100),
inPrt1 (101) .. inPrt48 (148).ro INTEGER .1.3.6.1.4.1.164.3.1.2.11.1.1.7 |
agnTsConIdxThis attribute indicates a unique TS number the Src TS is
routed to.
Valid values:
- for T1 ports - 1..24, Fbit(25)
- for E1 ports - 1..31
- for HDSL ports - 1..32 ; 32 will represent TS0.
- notApplicable - 255 (for ports that don't have TSs).ro INTEGER .1.3.6.1.4.1.164.3.1.2.11.1.1.8 |
agnTsTypeTime-Slot Type - regarding its connection and media type.
voice, data, vcMP - connected and the media is specified.
mng - management. This TS is Dedicated to Management (not
disconnected, but not connected to another port).
spare - applicable for ML-20 only. These TSs should be reserved for future
connection, though at the moment are not connected.rw Enumeration .1.3.6.1.4.1.164.3.1.2.11.1.1.9 |
agnTsRowStatusThis attribute allows to create/delete a row in this table.
For creating a row, the NMS should set
agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = active(1).
For destroying a row, the NMS should set:
agnTsRowStatus.255.id2.id3.id4.id5.id6.id7.id8 = destroy(6).
Only rows with status active(1) are relevant.rw Enumeration .1.3.6.1.4.1.164.3.1.2.11.1.1.10 |
agnTsDirectionDirection of the connection. This parameter is especially important
when in MP a ML is connected to an IO port that has no TSs, so it doesn't
appear in the TS Assignment for the first 5 indexes.
notApplicable - for products that do not support this object or for
certain TS Types (for example: mng, spare)
rx - the ML only Receives from the IO Port (the ML will appear in the
first 5 indexes).
tx - the ML only Transmits to the IO Port (the ML will appear in the
first 5 indexes). Nothing is received back.
both - the ML Receives and Transmits to the IO Port (the ML will appear in the
first 5 indexes).
bcastSrc - the ML is a Broadcast-Bidirectional Source. It Transmits to
one or several IO Ports (including the one that appears in the last
3 indexes) and sometimes receives.
The Port that responds is dynamic (it can be another each time).
The ML will appear in the first 5 indexes.
bcastDst - the ML is a Broadcast-Bidirectional Destination. Therefore,
it Receives and sometimes Transmits. The ML will appear in the
first 5 indexes.rw Enumeration .1.3.6.1.4.1.164.3.1.2.11.1.1.11 |
mdlWanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.3 |
statMdlGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.3.1 |
mdlSInstTable SEQUENCE OF MdlSInstEntry .1.3.6.1.4.1.164.3.1.3.1.1 |
mdlSInstEntry MdlSInstEntry .1.3.6.1.4.1.164.3.1.3.1.1.1 |
mdlSInstSltIdxA unique number to identify a slot position in the mux.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.1 |
mdlSInstCardTypeThis attribute indicates the type of card installed
in the specific slot position.
Only PS cards are possible in the PS slots.
Only CL cards are possible in the CL slots.
Only IO cards are possible in the IO slots.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.2 |
mdlSHwVersionThis attribute indicates the Hardware version of the
installed card in the specific slot position.ro DisplayString .1.3.6.1.4.1.164.3.1.3.1.1.1.3 |
mdlSSwVersionThis attribute indicates the Software version of the
installed card in the specific slot position.ro DisplayString .1.3.6.1.4.1.164.3.1.3.1.1.1.4 |
mdlSAlrStatusIndicates the alarm state at module level, i.e. lower level
(port alarms) status is not included.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.5 |
mdlSAlrStatusAllIndicates the alarm state in the module-all level, i.e. lower level
(port alarms) included.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.6 |
mdlSMaskedAlrStatIndicates the alarm state at module level, [i.e. lower level
(port alarms) status is not included],including Masked alarms.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.7 |
mdlSMaskedAlrStatAllIndicates the alarm state in the module-all level, i.e. lower level
(port alarms) included, including Masked alarms.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.8 |
mdlSTstStatusAllThis attribute will be set to on(3) when there is at least
one test in progress on a channel of the card, otherwise
the value will be off(2).ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.9 |
mdlSClearAlrCmdSetting this command to ON, enforces a clear of all the
alarms in the given slot, excluding alarms of port level.
The clear operation will not be applied for masked/inverted
alarms.rw Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.10 |
mdlSClearAllAlrCmdSetting this command to ON, enforces a clear of all the
alarms in the given slot, including all its ports alarms.
The clear operation will not be applied for masked/inverted
alarms.rw Enumeration .1.3.6.1.4.1.164.3.1.3.1.1.1.11 |
mdlSAlrTableThe list of card agent alarms ; includes also an alarm
indicating existence of alarms on its ports if there are any. SEQUENCE OF MdlSAlrEntry .1.3.6.1.4.1.164.3.1.3.1.2 |
mdlSAlrEntry MdlSAlrEntry .1.3.6.1.4.1.164.3.1.3.1.2.1 |
mdlSAlrIdxA unique number to identify an entry in the alarm status table.
Users should use the get next function to read this table because
the indexes are not consecutive.ro INTEGER .1.3.6.1.4.1.164.3.1.3.1.2.1.1 |
mdlSAlrSltIdxThis attribute indicates the desired slot position.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.2.1.2 |
mdlSAlrCodeDescriptionThis attribute is a full text description of the alarm .
The alarm description includes the following information:
alarm code, alarm text, alarm severity, Masked or Inverted
flag and counter.ro DisplayString .1.3.6.1.4.1.164.3.1.3.1.2.1.3 |
mdlSAlrCodeA code identifying the alarm of an entry in the alarm status
table at card level.ro INTEGER .1.3.6.1.4.1.164.3.1.3.1.2.1.4 |
mdlSAlrSeverityThe severity of the alarm.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.2.1.5 |
mdlSAlrStateState of the alarm.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.2.1.6 |
mdlSAlrCounterA counter - how many times the alarm occured since last
clear operation.
ON and OFF Alarm will be counted separately.ro INTEGER .1.3.6.1.4.1.164.3.1.3.1.2.1.7 |
mdlSAlrMaskAlarm mask : on/off.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.2.1.8 |
mdlSAlrInvertAlarm invert : on/off.ro Enumeration .1.3.6.1.4.1.164.3.1.3.1.2.1.9 |
cnfgMdlGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.3.2 |
mdlCPrgTable SEQUENCE OF MdlCPrgEntry .1.3.6.1.4.1.164.3.1.3.2.1 |
mdlCPrgEntry MdlCPrgEntry .1.3.6.1.4.1.164.3.1.3.2.1.1 |
mdlCCnfgIdxThis attribute indicates the Idx of the Cnfg(1..100) being
referred.
Value 255 specifies the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.1.3.2.1.1.1 |
mdlCSltIdxThis attribute indicates a unique number of the slot
position where the card is inserted.
In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.3.2.1.1.2 |
mdlCPrgCardTypeThis attribute indicates the type of card assigned to the
specific slot in the common configuration.
This object is identical in all the configurations (1..100).
Only the TmpCnf(255) may have different value.
The write operation is valid only to the TmpCnfg entry.rw Enumeration .1.3.6.1.4.1.164.3.1.3.2.1.1.3 |
mdlCNoOfExternPrtNumber of external ports in the programmed card of the
specific slot positionro INTEGER .1.3.6.1.4.1.164.3.1.3.2.1.1.4 |
mdlCNoOfInternPrtNumber of internal ports in the programmed card of the
specific slot position.ro INTEGER .1.3.6.1.4.1.164.3.1.3.2.1.1.5 |
cmprMdlGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.3.3 |
mdlCmprTable SEQUENCE OF MdlCmprEntry .1.3.6.1.4.1.164.3.1.3.3.1 |
mdlCmprEntry MdlCmprEntry .1.3.6.1.4.1.164.3.1.3.3.1.1 |
mdlCmprTypIdxThis attribute indicates the Type of the Compressed being
referred.ro INTEGER .1.3.6.1.4.1.164.3.1.3.3.1.1.1 |
mdlCmprCnfgIdxThis attribute indicates the configuration to which the
Compressed information is related.ro INTEGER .1.3.6.1.4.1.164.3.1.3.3.1.1.2 |
mdlCmprVersionThis attribute indicates the version of the internal format
of the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.3.3.1.1.3 |
mdlCmprSltIdxThis attribute indicates a unique number of the slot
position where the card is inserted.
In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.3.3.1.1.4 |
mdlCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.3.3.1.1.5 |
mdlAlarmsCmprTable SEQUENCE OF MdlAlarmsCmprEntry .1.3.6.1.4.1.164.3.1.3.3.2 |
mdlAlarmsCmprEntry MdlAlarmsCmprEntry .1.3.6.1.4.1.164.3.1.3.3.2.1 |
mdlAlarmsCmprVersionThis attribute indicates the version of the internal format
of the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.3.3.2.1.1 |
mdlAlarmsCmprAlarmSlotThis attribute indicates the desired slot position.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16)
are not valid.ro INTEGER .1.3.6.1.4.1.164.3.1.3.3.2.1.2 |
mdlAlarmsCmprAlarmIdxA unique number to identify an entry in the alarm status table
of the agent.ro INTEGER .1.3.6.1.4.1.164.3.1.3.3.2.1.3 |
mdlAlarmsCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.3.3.2.1.4 |
prtWanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4 |
statPrtGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.1 |
prtSInstTable SEQUENCE OF PrtSInstEntry .1.3.6.1.4.1.164.3.1.4.1.1 |
prtSInstEntry PrtSInstEntry .1.3.6.1.4.1.164.3.1.4.1.1.1 |
prtSInstSltIdxThis attribute indicates a unique number to identify the
slot where the card is inserted.
In the ?004 Unit the entries io6(10)..io(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.1 |
prtSInstPrtIdxThis attribute indicates a unique number to identify a port
in a specific card.
The valid ports depend on the installed card:
the valid external ports (interfaces) are (1..mdlCNoOfExternPrt) if any,
and the valid internal ports are (101..100+mdlCNoOfInternPrt) if any.
Generally: exPrt1 (1) .. exPrt12 (12),
inPrt14 (114) .. inPrt48 (148)ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.1.1.2 |
prtSInstPrtTypeThis attribute describes the type of the designated port.
In MX 3000 only external & internal options are used.
All the other options are only for MX 30/300 which need special handling.
In order to support interface types in MX 3000, return an ascii string for
prtSInterfaceType in this table or support the general RAD value of
physicalConnector.
External port - is a port with a physical connector.
Internal port - might be of two types:
a) A composite port which collects a few external ports
data into a common bandwidth (usually routed through
DS1 link)
b) A port which gets only part of the external ports
(usually a few DS0's)
The following types are used when all ports are external/
internal and the connector/interface type is necessary
(for example, stand-alone units):
High Speed port types
Low Speed port types
Voice port types, CL port types.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.3 |
prtSInstIfIndexThis attribute indicates the unique interface number
assigned to the port. The specific interface of this
attribute is the same as the interface identified by the
value of ifindex in MIB-II.If there is no interface for
the specific prtIdx the value will be '7fffffff'h.ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.1.1.4 |
prtSActiveStatusThis attribute describes the activity status of the port.
unknown(1) indicates that the information is not supported.
notUsed(2) indicates that the ch is not connected according
to the active config.
offLine(3) indicates that the ch is down (not working)
because of any problem.
onLine(4) indicates that the ch is up (working)
offLineRedundancy(5) indicates that the ch is down, because
it is redundant port.
onLineRedundancy(6) indicates that the ch is up, and it is
the active linkro Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.5 |
prtSAlrStatusIndicates the alarm state in the port(ch) agent level.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.6 |
prtSMaskedAlrStatIndicates the alarm state in the port(ch) agent level,
including Masked alarms.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.7 |
prtSClearAlrCmdSetting this attribute to on(3) enforces a clear operation
of the alarm status events in the given port. The clear
operation will not be applied for masked/inverted alarms.rw Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.8 |
prtSTestMaskThis is a mask which indicates which tests from the
'prtSTstCmd' list are allowed for the requested port.
If a specific test is allowed, its respective bit
will be SET in the mask :
TEST BIT
-
local-loop 1
remote-loop 2
loc-and-rem-main-loops 3
remote-analog-loop 4
remote-digital-loop 5
rem-loop-on-ext-unit 6
bert 7
tone-injection 8
dlci local-loop 9
all dlci local-loop 10
dlci remote-loop 11
all dlci remote-loop 12
bert-and-rem-loop-on-rem-unit 13
rem-loop-on-rem-unit 14
block 15
backward-tone-inject 16
llb 17
rlb 18
ft1Enable 21
lbbd 22
lb1 23
lb2 24
e.g : If the return value is 3 -> 0000000000000011 ->
Bits 1 & 2 are set -> the allowed tests are :
local-loop
remote-loopro INTEGER .1.3.6.1.4.1.164.3.1.4.1.1.1.9 |
prtSTstCmdSetting this attribute to any of the above values will
initiate a test on the specific port if the operation is
legal. If the operation is not legal, the mux will ignore
the operation.
If a test time out is needed, the test will be set with a
default timeout of 2 minutes until the user will set the
parameter 'prtSTstDuration' to the required time out.
If no time out is needed , the test will be set with infinite
timeout until the user will set the parameter
'prtSTstDuration' to the required time out.rw Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.10 |
prtSTstDurationThis attribute indicates the maximum duration of executing
a test on the specific port. This entry applies to all the
test operations. The resolution will be a minute, and the
maximum duration is limited to 30 minutes .
A zero value specifies no time limitation.
When the test isn't active, the agent initiates this object to
2 when the duration is needed and to 0 if its not required.
The user should set this parameter after setting the
'prtSTstCmd' parameter.rw INTEGER .1.3.6.1.4.1.164.3.1.4.1.1.1.11 |
prtSBertClrCmdSetting this attribute initiates bert count clear operation.
It is valid only when bert test is active on the specific
port.rw Enumeration .1.3.6.1.4.1.164.3.1.4.1.1.1.12 |
prtSBertTstRsltThis attribute indicates the number of Bit Error Rate
indicated during the BERT operation.
It is valid only when bert test is active on the specific
port.ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.1.1.13 |
prtSInterfaceTypeThis attribute indicates a unique HW interface type of the
selected port.ro DisplayString .1.3.6.1.4.1.164.3.1.4.1.1.1.14 |
prtSParamStatusThis object indicates Status of parameters specific to the
selected port.
- For a port that has no special status or is supported
by prtSExHsfStatTable - 1 Octet: 00hex
- For VC-6, VC-12, VC-12/6 external ports - 1 Octet :
Bit 7 (MSB)..Bit 2 = 0 (NA)
Bit 1: Tx Signaling '1'=On ; '0'=Off
Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off
- For VC-6A and VC-6AG external ports - 1 Octet :
Bit 7 (MSB)..Bit 3 = 0 (NA)
Bit 2: ADPCM module '1' =Exist ; '0' =Not Exist
Bit 1: Tx Signaling '1'=On ; '0'=Off
Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off
- For VC-2/R2(FXS) external ports - 1 Octet :
Bit - 7 6 5 4 3 2 1 0
|_| |_________|
Call Call State
Direction
Bit 7 (MSB) and Bit 6 : Call Direction
00 - Incoming
01 - Outgoing
Bit 5..Bit 0: Call State
000000 - Idle
000001 - Seized
000010 - Both-Way Conflict
000011 - Seizure Ack
000100 - Answered
000101 - Clear Backward
000110 - Clear Forward
000111 - Blocked
001000 - Fault
001001 - Fault 3
001010 - Fault 4
001011 - Fault 5
001100 - Fault 6
001101 - Fault 7
- For ML-20 external port - 3 Octets :
- 1 MS Octet will represent the Real Rate used:
Bit - 7 6 5 4 3 2 1 0
|___| |_______|
spare Rate
Valid values: 0..31, meaning 0..31x64Kbps
Invalid values: 32..255.
- 2 LS Octets will represent the Status of 7 Control
Signals:
Signal -
Bit - 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
Octet - 2 3 (LS)
'
Rest of the Signals (2 bits each) can have the following
values:
00=NA ; 01=unused ; 10=Off ; 11=On
- For ML-H/E1, ML-H/1/E1, ML-H/S/E1 internal port - 1 Octet
Bit - 7 6 5 4 3 2 1 0
|___________|
spare Mode of Operation
Mode of Operation: '1'=Central ; '0'=Remote
- For ACM external port - 1 Octet
Bit - 7 6 5 4 3 2 1 0
|_________|
spare Alarm State
Alarm State: according to bits 1,0:
00=NA ; 01=unused ; 10=Off ; 11=On
- For HS-U/1 external port - 1 Octet
Bit 7 6 5 4 3 2 1 0 LSB
|________| |__| |__|
spare modem sync
modem: 00 = unknown sync: 00 = not sync
01 = ASMi-31 01 = sync
10 = other 10 = reserved
11 = reserved 11 = reservedro OCTET STRING .1.3.6.1.4.1.164.3.1.4.1.1.1.15 |
prtSAlrTableThe list of port agent alarms. SEQUENCE OF PrtSAlrEntry .1.3.6.1.4.1.164.3.1.4.1.2 |
prtSAlrEntry PrtSAlrEntry .1.3.6.1.4.1.164.3.1.4.1.2.1 |
prtSAlrIdxA unique number to identify an entry in the alarm status table.
Users should use the get next function to read this table because
the indexes are not consecutivero INTEGER .1.3.6.1.4.1.164.3.1.4.1.2.1.1 |
prtSAlrSltIdxThis attribute indicates a unique identifier of the slot
where the card is inserted.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.2.1.2 |
prtSAlrPrtIdxThis attribute indicates a unique identifier of the port
the alarm applies to.
All the values are valid. No alarms exist for a port
which does not physically exist.
Valid values: exPrt1 (1) .. exPrt12 (12) ,
inPrt1 (101) .. inPrt48 (148).ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.2.1.3 |
prtSAlrCodeDescriptionThis attribute is a full text description of the alarm.
The alarm description includes the following information:
alarm code, alarm text, alarm severity, Masked or Inverted
flag and counter.ro DisplayString .1.3.6.1.4.1.164.3.1.4.1.2.1.4 |
prtSAlrCodeA code identifying the alarm of an entry in the alarm status
table at port level.ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.2.1.5 |
prtSAlrSeverityThe severity of the alarm.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.2.1.6 |
prtSAlrStateState of the alarm.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.2.1.7 |
prtSAlrCounterA counter - how many times the alarm occured since last
clear operation.
ON and OFF Alarm will be counted separately.ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.2.1.8 |
prtSAlrMaskAlarm mask : on/off.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.2.1.9 |
prtSAlrInvertAlarm invert : on/off.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.2.1.10 |
statisPrtGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.1.3 |
prtFrStatis OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.1.3.1 |
prtFrStatisTableThis table is applicable only for an active port running an
FR protocol . SEQUENCE OF PrtFrStatisEntry .1.3.6.1.4.1.164.3.1.4.1.3.1.1 |
prtFrStatisEntry PrtFrStatisEntry .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1 |
prtFrStatisSltIdxThis attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
For stand-alone units this index will be notApplicable (255).ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.1 |
prtFrStatisPrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.2 |
prtFrStatisInvIdxThe Interval of 15 min. for which the following statistics
counters are applicable.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.3 |
prtFrTimeElapsedThe number of seconds that have elapsed since the
beginning of the current error-measurement interval.
This object is applicable mainly for the current interval.
For other interval:
- if data is available: value will be 899.
- if data is not available: value will be 0.ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.4 |
prtFrRxTotalFramesThe total number of frames received by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.5 |
prtFrTxTotalFramesThe total number of frames sent by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.6 |
prtFrRxTotalBytesThe total number of bytes received by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.7 |
prtFrTxTotalBytesThe total number of bytes sent by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.8 |
prtFrRxMngFramesThe management number of frames received by this port
during the selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.9 |
prtFrTxMngFramesThe management number of frames sent by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.10 |
prtFrRxDeFramesThe number of De frames received by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.11 |
prtFrTxDeFramesThe number of De frames sent by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.12 |
prtFrRxDcrdCongDeFrThe number of De frames discarded due to congestion,
received by this port during the selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.13 |
prtFrTxDcrdCongDeFrThe number of De frames discarded due to congestion,
sent by this port during the selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.14 |
prtFrRxDcrdCongAllFrAll the frames discarded due to congestion,
received by this port during the selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.15 |
prtFrTxDcrdCongAllFrAll the frames discarded due to congestion,
sent by this port during the selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.16 |
prtFrRxFecnNumber of frames received by this port during the
selected interval, indicating forward congestion.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.17 |
prtFrTxFecnNumber of frames sent by this port during the
selected interval, indicating forward congestion.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.18 |
prtFrRxBecnNumber of frames received by this port during the
selected interval, indicating backward congestion.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.19 |
prtFrTxBecnNumber of frames sent by this port during the
selected interval, indicating backward congestion.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.20 |
prtFrRxBeViolNumber of data frames received by this port during the
selected interval, exceeding the Burst Excess value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.21 |
prtFrTxBeViolNumber of data frames sent by this port during the
selected interval, exceeding the Burst Excess value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.22 |
prtFrRxBcViolNumber of data frames received by this port during the
selected interval, exceeding the Burst Committed value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.23 |
prtFrTxBcViolNumber of data frames sent by this port during the
selected interval, exceeding the Burst Committed value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.24 |
prtCrStatis OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.1.3.2 |
prtCrStatisTableThis table is applicable only for an active port running a
CR protocol . SEQUENCE OF PrtCrStatisEntry .1.3.6.1.4.1.164.3.1.4.1.3.2.1 |
prtCrStatisEntry PrtCrStatisEntry .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1 |
prtCrStatisSltIdxThis attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
For stand-alone units this index will be notApplicable (255).ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.1 |
prtCrStatisPrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.2 |
prtCrStatisInvIdxThe Interval of 15 min. for which the following statistics
counters are applicable.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.3 |
prtCrTimeElapsedThe number of seconds that have elapsed since the
beginning of the current error-measurement interval.
This object is applicable mainly for the current interval.
For other interval:
- if data is available: value will be 899.
- if data is not available: value will be 0.ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.4 |
prtCrRxTotalCellsThe total number of cells received by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.5 |
prtCrTxTotalCellsThe total number of cells sent by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.6 |
prtCrRxDataCellsThe number of Data Cells received by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.7 |
prtCrTxDataCellsThe number of Data Cells sent by this port during the
selected interval.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.8 |
prtDlciStatis OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.1.3.3 |
prtDlciStatisTableThis table is applicable only for an active port running an
FR, FR+ or CR protocol, with valid DLCIs . SEQUENCE OF PrtDlciStatisEntry .1.3.6.1.4.1.164.3.1.4.1.3.3.1 |
prtDlciStatisEntry PrtDlciStatisEntry .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1 |
prtDlciSltIdxThis attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
For stand-alone units this index will be notApplicable (255).ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.1 |
prtDlciPrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.2 |
prtDlciIdxThis attribute indicates a unique DLCI index for each valid
DLCI (16..991).ro INTEGER .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.3 |
prtDlciRxDeFramesThe number of De frames received by this DLCI.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.4 |
prtDlciTxDeFramesThe number of De frames sent by this DLCI.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.5 |
prtDlciRxDcrdCongDeFrThe number of De frames discarded due to congestion,
received by this DLCI.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.6 |
prtDlciTxDcrdCongDeFrThe number of De frames discarded due to congestion,
sent by this DLCI.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.7 |
prtDlciRxDcrdCongAllFrAll the frames discarded due to congestion,
received by this DLCI.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.8 |
prtDlciTxDcrdCongAllFrAll the frames discarded due to congestion,
sent by this DLCI.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.9 |
prtDlciTxFecnNumber of frames sent by this DLCI, indicating forward
congestion.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.10 |
prtDlciTxBecnNumber of frames sent by this DLCI, indicating backward
congestion.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.11 |
prtDlciRxBeViolNumber of data frames received by this DLCI, exceeding the
Burst Excess value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.12 |
prtDlciTxBeViolNumber of data frames sent by this DLCI, exceeding the Burst
Excess value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.13 |
prtDlciRxBcViolNumber of data frames received by this DLCI, exceeding the
Burst Committed value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.14 |
prtDlciTxBcViolNumber of data frames sent by this DLCI, exceeding the Burst
Committed value.ro Counter .1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.15 |
prtT1Statis OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.1.3.4 |
prtT1FdlMsgTableThis table is applicable for a T1 interface with 'esf'
LineType . SEQUENCE OF PrtT1FdlMsgEntry .1.3.6.1.4.1.164.3.1.4.1.3.4.1 |
prtT1FdlMsgEntry PrtT1FdlMsgEntry .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1 |
prtT1FdlMsgSltIdxThis attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.1 |
prtT1FdlMsgPrtIdxThis attribute indicates a unique port number.
MTML-1/T1 modules have just one external interface.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.2 |
prtT1FdlMsgFdlTxRxThe Fdl tx/rx reference of the Fdl message.ro Enumeration .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.3 |
prtT1FdlMsgFDL message.ro OCTET STRING .1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.4 |
cnfgPrtGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.2 |
prtExTsSplitTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExTsSplitEntry .1.3.6.1.4.1.164.3.1.4.2.1 |
prtExTsSplitEntry PrtExTsSplitEntry .1.3.6.1.4.1.164.3.1.4.2.1.1 |
prtExTsCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.1.1.1 |
prtExTsSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
notApplicable - for stand-alone units.ro Enumeration .1.3.6.1.4.1.164.3.1.4.2.1.1.2 |
prtExTsPrtIdxThis attribute indicates a unique port number.
Most ML cards have only one external interface.
inPrt1 - for MTML-H/E1 cards.
For other products' index see their specification.ro INTEGER -- For MP: -- { -- exPrt1 (1), -- inPrt1 (101) -- } .1.3.6.1.4.1.164.3.1.4.2.1.1.3 |
prtExTsIdxThis attribute indicates a unique time slot position.
The valid time slots are:
1..24 for T1 Card and
1..31 for E1 interface.
In G732S-E1 lines, time slot 16 is not valid for data,
it is dedicated to multiframe synchronization bits
and voice signaling.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.1.1.4 |
prtExTsBitThis attribute indicates a unique Bit within the time slot.
The valid Bits are: 1..8.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.1.1.5 |
prtExTsIConSlotThis attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card
it is connected.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
notApplicable - for stand-alone units.rw Enumeration .1.3.6.1.4.1.164.3.1.4.2.1.1.6 |
prtExTsIConPrtThis attribute indicates the internally (In Mux)
connected/routed port.
For other products' index see their specification.rw INTEGER -- For MP: -- { -- exPrt1 (1) , -- exPrt2 (2) , -- exPrt3 (3) , -- exPrt4 (4) , -- exPrt5 (5) , -- exPrt6 (6) , -- exPrt7 (7) , -- exPrt8 (8) , -- exPrt9 (9) , -- exPrt10 (10) , -- exPrt11 (11) , -- exPrt12 (12) , -- -- noConnect (100), -- -- inPrt1 (101) , -- inPrt2 (102) , -- inPrt3 (103) , -- inPrt4 (104) , -- inPrt5 (105) , -- inPrt6 (106) , -- inPrt7 (107) , -- inPrt8 (108) , -- inPrt9 (109) , -- inPrt10 (110) , -- inPrt11 (111) , -- inPrt12 (112) -- } .1.3.6.1.4.1.164.3.1.4.2.1.1.7 |
prtCnfgAgenda OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.2.2 |
prtAgendaBehaviourTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtAgendaBehaviourEntry .1.3.6.1.4.1.164.3.1.4.2.2.1 |
prtAgendaBehaviourEntry PrtAgendaBehaviourEntry .1.3.6.1.4.1.164.3.1.4.2.2.1.1 |
prtAgendaBehaviourCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.1.1.1 |
prtAgendaBehaviourSltIdxThis parameter should be:
- slot number for MX3000
- 255 = N/A for MX300/30.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.1.1.2 |
prtAgendaBehaviourPrtIdxThis parameter should be:
- port number for MX300/30
- 100 = N/A for MX3000.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.1.1.3 |
prtAgendaBehaviourOnOffSetting this command to on(3) enables the agenda function
at module (3000) or port (300/30) level.rw Enumeration .1.3.6.1.4.1.164.3.1.4.2.2.1.1.4 |
prtCnfgAgendaTableThis table allows the user to schedule the time a session
is active per week basis. SEQUENCE OF PrtCnfgAgendaEntry .1.3.6.1.4.1.164.3.1.4.2.2.2 |
prtCnfgAgendaEntry PrtCnfgAgendaEntry .1.3.6.1.4.1.164.3.1.4.2.2.2.1 |
prtCnfgAgendaCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.2.1.1 |
prtCnfgAgendaSltIdxThis attribute is equal to:
-slot number for MX3000
-255 = N/A for MX300/30ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.2.1.2 |
prtCnfgAgendaPrtIdxThis attribute is equal to:
-port number for MX300/30
-100 = N/A for MX3000ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.2.1.3 |
prtCnfgAgendaDayIdxThis attribute for which day of the week this row applies.ro Enumeration .1.3.6.1.4.1.164.3.1.4.2.2.2.1.4 |
prtCnfgAgendaSesIdThe user may define 4 different active intervals per day.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.2.1.5 |
prtCnfgAgendaFromStart from time interval in seconds.rw INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.2.1.6 |
prtCnfgAgendaToTo time interval in seconds.rw INTEGER .1.3.6.1.4.1.164.3.1.4.2.2.2.1.7 |
prtGenCnfgTableThis table allows the user to configure general
port parameters. SEQUENCE OF PrtGenCnfgEntry .1.3.6.1.4.1.164.3.1.4.2.3 |
prtGenCnfgEntry PrtGenCnfgEntry .1.3.6.1.4.1.164.3.1.4.2.3.1 |
prtGenCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.
The write operation is valid only to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.3.1.1 |
prtGenCnfgSltIdxThis attribute indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.1.4.2.3.1.2 |
prtGenCnfgPrtIdxThis attribute indicates a unique external or internal port number.
For MP:
exPrt1 (1) .. exPrt12 (12) ,
notApplicable(100),
inPrt1 (101) .. inPrt48 (148)ro INTEGER .1.3.6.1.4.1.164.3.1.4.2.3.1.3 |
prtGenCnfgLinkToSlotThis attribute indicates the slot of the ML card to which
the IO port is mapped.rw Enumeration .1.3.6.1.4.1.164.3.1.4.2.3.1.4 |
prtGenCnfgLinkToPortThis attribute indicates the port in the prtGenCnfgLinkToSlot of
the ML card to which the IO port is mapped.
For MP:
exPrt1 (1) ,
exPrt2 (2) ,
exPrt3 (3) ,
exPrt4 (4) ,
inPrt1 (101)
notApplicable (255)rw INTEGER .1.3.6.1.4.1.164.3.1.4.2.3.1.5 |
prtGenCnfgPortIdIO Port Id for V5.1 use.
This object is applicable only for part of the PSTN and ISDN IO ports.
Generally, 0 is a valid value.
Nevertheless, for ports that do not support this object, the value
will be: notApplicable= 0rw INTEGER .1.3.6.1.4.1.164.3.1.4.2.3.1.6 |
cmprPrtGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.4.3 |
prtCmprTable SEQUENCE OF PrtCmprEntry .1.3.6.1.4.1.164.3.1.4.3.1 |
prtCmprEntry PrtCmprEntry .1.3.6.1.4.1.164.3.1.4.3.1.1 |
prtCmprTypIdxThis attribute indicates the Type of the Compressed being
referred.ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.1.1.1 |
prtCmprCnfgIdxThis attribute indicates the configuration to which the
Compressed information is related.ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.1.1.2 |
prtCmprVersionThis attribute indicates the version of the internal format of
the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.4.3.1.1.3 |
prtCmprSltIdxThis attribute indicates a unique number of the slot position
where the card is inserted.
In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.4.3.1.1.4 |
prtCmprPrtIdxThis attribute indicates a unique identifier of the port
the compressed information relates to.
Valid values: exPrt1 (1) .. exPrt12 (12) ,
inPrt1 (101) .. inPrt48 (148).ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.1.1.5 |
prtCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.4.3.1.1.6 |
prtDlciCmprTable SEQUENCE OF PrtDlciCmprEntry .1.3.6.1.4.1.164.3.1.4.3.2 |
prtDlciCmprEntry PrtDlciCmprEntry .1.3.6.1.4.1.164.3.1.4.3.2.1 |
prtDlciCmprCnfgIdxThis attribute indicates the configuration to which the
Compressed information is related.ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.2.1.1 |
prtDlciCmprVersionThis attribute indicates the version of the internal format of
the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.4.3.2.1.2 |
prtDlciCmprSltIdxThis attribute indicates a unique number of the slot position
where the module is inserted.
In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16)
are not valid.ro Enumeration .1.3.6.1.4.1.164.3.1.4.3.2.1.3 |
prtDlciCmprPrtIdxThis attribute indicates a unique identifier of the port
the compressed information relates to.
All the values are valid.ro Enumeration .1.3.6.1.4.1.164.3.1.4.3.2.1.4 |
prtDlciCmprDlciIdxThis attribute indicates a unique identifier of the Dlci
the compressed information relates to.
The values are between 16 - 991.ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.2.1.5 |
prtDlciCmprObjThis attribute is the compressed information itself.rw OCTET STRING .1.3.6.1.4.1.164.3.1.4.3.2.1.6 |
prtAlarmsCmprTable SEQUENCE OF PrtAlarmsCmprEntry .1.3.6.1.4.1.164.3.1.4.3.3 |
prtAlarmsCmprEntry PrtAlarmsCmprEntry .1.3.6.1.4.1.164.3.1.4.3.3.1 |
prtAlarmsCmprVersionThis attribute indicates the version of the internal format of
the Compressed dataro INTEGER .1.3.6.1.4.1.164.3.1.4.3.3.1.1 |
prtAlarmsCmprAlarmSlotThis attribute indicates the desired slot position.
In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16)
are not valid.
For Stand-alone units, notApplicable(255) will appear.ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.3.1.2 |
prtAlarmsCmprAlarmPortThis attribute indicates a unique identifier of the port
the alarm applies to.
All the values are valid. No alarms exist for a non-physical
portro INTEGER .1.3.6.1.4.1.164.3.1.4.3.3.1.3 |
prtAlarmsCmprAlarmIdxA unique number to identify an entry in the alarm status table
of the agent.ro INTEGER .1.3.6.1.4.1.164.3.1.4.3.3.1.4 |
prtAlarmsCmprObjThis attribute is the compressed information itself.ro OCTET STRING .1.3.6.1.4.1.164.3.1.4.3.3.1.5 |
mapWanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.5 |
agnLinkMapTable SEQUENCE OF AgnLinkMapEntry .1.3.6.1.4.1.164.3.1.5.1 |
agnLinkMapEntry AgnLinkMapEntry .1.3.6.1.4.1.164.3.1.5.1.1 |
mapLinkIdA unique identifier of the linkro INTEGER .1.3.6.1.4.1.164.3.1.5.1.1.1 |
mapLinkSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries clA(3), io6(10)..io12(16) are
not valid.rw Enumeration .1.3.6.1.4.1.164.3.1.5.1.1.2 |
mapLinkPrtIdxThis attribute indicates a unique port number.rw Enumeration .1.3.6.1.4.1.164.3.1.5.1.1.3 |
mapLinkStatusThis attribute indicates the status of the link between the
two muxesro Enumeration .1.3.6.1.4.1.164.3.1.5.1.1.4 |
diverseIfWanGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.6 |
ethIf OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.1.6.1 |
ethIfTable SEQUENCE OF EthIfEntry .1.3.6.1.4.1.164.3.1.6.1.1 |
ethIfEntry EthIfEntry .1.3.6.1.4.1.164.3.1.6.1.1.1 |
ethIfIdxA unique index of the ethernet interface/port.ro INTEGER .1.3.6.1.4.1.164.3.1.6.1.1.1.1 |
ethModeThis object indicates the Ethernet mode of operation.rw Enumeration .1.3.6.1.4.1.164.3.1.6.1.1.1.2 |
ethBridgingModeThis object indicates the bridging mode of the Ethernet
interface.rw Enumeration .1.3.6.1.4.1.164.3.1.6.1.1.1.3 |
muxHub OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2 |
alarmsTrap} TRAP-TYPE .1.3.6.1.4.1.164.3.2.0.1 |
sanityTrapThis trap is sent after a data base update.
It returns the sanity result status and the configuration no.
checked.
If the result is of Flip DB Sanity Check, the configuration
no. sent will be 0.
If the result is of Variant Sanity Check, the configuration
no. sent will be 100. TRAP-TYPE .1.3.6.1.4.1.164.3.2.0.2 |
cnfgFlipTrapThis trap is sent upon change of the active Configuration DB.
Attached, is the new active Configuration no. TRAP-TYPE .1.3.6.1.4.1.164.3.2.0.3 |
flipDbChangeTrapThis trap is sent upon change of the active Flip tables
(Flip DB). TRAP-TYPE .1.3.6.1.4.1.164.3.2.0.4 |
statusChangedTrapThis trap is sent upon any change of the LEDs status. TRAP-TYPE .1.3.6.1.4.1.164.3.2.0.5 |
agnMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.1 |
mdlMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.2 |
cnfgMdlMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.2.1 |
mdlPbxFramerCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.2.1.1 |
mdlPbxFramerCnfgTableThis table contains parameters relevant to a module belonging to
a digital voice system, except mdlPbxFraEnhEcho which is relevant
also for analog cards. SEQUENCE OF MdlPbxFramerCnfgEntry .1.3.6.1.4.1.164.3.2.2.1.1.1 |
mdlPbxFramerCnfgEntry MdlPbxFramerCnfgEntry .1.3.6.1.4.1.164.3.2.2.1.1.1.1 |
mdlPbxFraCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.2.1.1.1.1.1 |
mdlPbxFraSltIdxThe slot relevant to this module.ro Enumeration .1.3.6.1.4.1.164.3.2.2.1.1.1.1.2 |
mdlPbxFraEnhEchoRefers to external ports of an analogue module
and to the internal ports of the other mvc4 types
of modules.
ms16(3) means that the four voice ports have enhanced
echo of 16ms.
ms32(4) means that the two first ports have enhanced
echo of 32 ms while the last two ports have no
enhanced echo.rw Enumeration .1.3.6.1.4.1.164.3.2.2.1.1.1.1.3 |
mdlPbxFraTSGroupAssIn case of T1 modules:
group1=(1,2,3,4), ...., group6=(21,22,23,24)
while in case of E1 modules:
- If prtExPh1MlLineType=g732sE1 or g732sE1CRC:
group1=(1,2,3,4),..,group4=(13,14,15,17),
group5=(18,19,20,21),...,group7=(26,27,28,29)
group8=(30,31).
- If prtExPh1MlLineType=g732nE1 or g732nE1CRC:
group1=(1,2,3,4),..,group4=(13,14,15,16),
group5=(17,18,19,20),...,group7=(25,26,27,28)
group8=(29,30,31).rw Enumeration .1.3.6.1.4.1.164.3.2.2.1.1.1.1.4 |
mdlPbxFraSignalModeRefers to the signaling mode of the Framer module.
tieTrunk(2), tieInvert(3), casTrans(4) are standard
coding of the signaling protocol.
casTrans(4) is Channel Associated Signaling (the signaling is within the
channels time slot).
ccsTrans(6) is Common Channel Signaling (the signaling is not within
the channels time slot).
userDefined(5) allows the user to define the signaling
protocol he wants. In this case, the next two MIB fields
are relevant.rw Enumeration .1.3.6.1.4.1.164.3.2.2.1.1.1.1.5 |
mdlPbxFraSignalVectorIn the case of mdlPbxFraSignalMode = userDefined(5), this
field defines the A,B,C Bits. D bit is supplied for future
versions.
Bit 1 = Bit A ON Hook - Local
Bit 2 = Bit B ON Hook - Local
Bit 3 = Bit C ON Hook - Local
Bit 4 = Bit D ON Hook - Local
Bit 5 = Bit A OFF Hook - Local
Bit 6 = Bit B OFF Hook - Local
Bit 7 = Bit C OFF Hook - Local
Bit 8 = Bit D OFF Hook - Local
Bit 9 = Bit A ON Hook - Remote
Bit 10 = Bit B ON Hook - Remote
Bit 11 = Bit C ON Hook - Remote
Bit 12 = Bit D ON Hook - Remote
Bit 13 = Bit A OFF Hook - Remote
Bit 14 = Bit B OFF Hook - Remote
Bit 15 = Bit C OFF Hook - Remote
Bit 16 = Bit D OFF Hook - Remote
In conjunction with the Mask, mdlPbxFraSignalMask, it is
possible to compute the signal mode.rw OCTET STRING .1.3.6.1.4.1.164.3.2.2.1.1.1.1.6 |
mdlPbxFraSignalMaskIn the case of mdlPbxFraSignalMode = userDefined(5), this
field defines the 'don't care' A,B,C Bits. D bit is supplied
for future versions.
Bit 1 = Bit A ON Hook - Local
Bit 2 = Bit B ON Hook - Local
Bit 3 = Bit C ON Hook - Local
Bit 4 = Bit D ON Hook - Local
Bit 5 = Bit A OFF Hook - Local
Bit 6 = Bit B OFF Hook - Local
Bit 7 = Bit C OFF Hook - Local
Bit 8 = Bit D OFF Hook - Local
Bit 9 = Bit A ON Hook - Remote
Bit 10 = Bit B ON Hook - Remote
Bit 11 = Bit C ON Hook - Remote
Bit 12 = Bit D ON Hook - Remote
Bit 13 = Bit A OFF Hook - Remote
Bit 14 = Bit B OFF Hook - Remote
Bit 15 = Bit C OFF Hook - Remote
Bit 16 = Bit D OFF Hook - Remote.rw OCTET STRING .1.3.6.1.4.1.164.3.2.2.1.1.1.1.7 |
mdlPbxFraFramerSlotSlot where is sitting the Framer.rw Enumeration .1.3.6.1.4.1.164.3.2.2.1.1.1.1.8 |
mdlPbxFraSignalingSignaling - describes the way the signaling ABCD bits pass from the
local extension to the remote extension and vice-versa.
endToEnd = the signaling ABCD bits pass without change from local to
remote extension.
localTermination = the signaling ABCD bits received from the local extension
are translated to different ON Hook/OFF Hook bit values and then
passed to remote extension. This is relevant when the Local
and Remote ON Hook/OFF Hook values are different.rw Enumeration .1.3.6.1.4.1.164.3.2.2.1.1.1.1.9 |
prtMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3 |
statPrtMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.1 |
prtSExHsfStatTable SEQUENCE OF PrtSExHsfStatEntry .1.3.6.1.4.1.164.3.2.3.1.6 |
prtSExHsfStatEntry PrtSExHsfStatEntry .1.3.6.1.4.1.164.3.2.3.1.6.1 |
prtSExHsfSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.1.6.1.1 |
prtSExHsfPrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.2.3.1.6.1.2 |
prtSExHsfInterfaceTypThis attribute indicates a unique interface type of a
selected port.ro Enumeration .1.3.6.1.4.1.164.3.2.3.1.6.1.3 |
prtSExHsfRtsThis attribute indicates a unique RTS control signal state.ro Enumeration .1.3.6.1.4.1.164.3.2.3.1.6.1.4 |
cnfgPrtMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2 |
prtClCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.1 |
prtExClCnfgTable SEQUENCE OF PrtExClCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.1.1 |
prtExClCnfgEntryAll the entries at this table are identical (have the same
value) for all the configurations (1..100) except the
TmpCnfg.
The write operation into the Table Objects is valid only
to the TmpCnfg entry. PrtExClCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.1.1.1 |
prtExClCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.1.1.1.1 |
prtExClSltIdxThis attribute indicates a unique slot position where
the card is inserted. Because the second Cl is only for
redundancy, all the parameters are identical in the two
modules, i.e. change of any parameter in one module will
change automatically the value of the other module..
In the ?004 Unit the entry clB(4) is not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.2 |
prtExClPrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.3 |
prtExClUsageThis attribute indicates what is the usage of the port.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.4 |
prtExClRateThis attribute indicates the operation rate of the port.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.5 |
prtExClDataBitsThis attribute indicates the number of data bits in async
framero Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.6 |
prtExClParityThis attribute indicates if the parity operation mode in
async framero Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.7 |
prtExClStopBitsThis attribute indicates the minimum number of stop bits in
the tx async framero Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.8 |
prtExClRoutingProtocolThis attribute indicates the routing protocol of the port.
When prtExClUsage is nmsSlip or nmsPpp - all values are
applicable .
Else - only 'none' is applicable.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.1.1.1.9 |
prtPh1MlCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.2 |
prtExPh1MlCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExPh1MlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.2.1 |
prtExPh1MlCnfgEntry PrtExPh1MlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.2.1.1 |
prtExPh1MlCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.1.1.1 |
prtExPh1MlSltIdxThis attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.2 |
prtExPh1MlPrtIdxThis attribute indicates a unique port number.
MTML-1/E1 and MTML-1/T1 cards have only one external interface.
inPrt1 - for MTML-H/E1 cards.
exPrt2..exPrt4 - for MTML-4 cards and others.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.3 |
prtExPh1MlConnectThis attribute indicates whether the port should be considered
in any of the mux algorithms. It also affects all the card
considerations because it may indicate that the module has only
one physical interface.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.4 |
prtExPh1MlLineTypeThis attribute is the line type parameter for T1/E1 interface.
The user should select only the parameters which are relevant
to the specific card:
T1 line code parameters for the MPH.1/T1
E1 line code parameters for the MPH.1/E1.
This parameter has the same values as dsx1LineType in T1/E1
MIB (RFC-1406). The parameters in dsx1LineType are:
other (1)
esfT1 dsx1ESF (2)
sfT1 dsx1D4 (3)
g732nE1 dsx1E1 (4)
g732nE1CRC dsx1E1-CRC (5)
g732sE1 dsx1E1-MF (6)
g732sE1CRC dsx1E1-MF-CRC (7)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.5 |
prtExPh1MlLineCodeThis attribute is the line code parameter used for T1/E1
interface.
The user should select only the parameters which are relevant
to the specific card:
T1 line code parameters for MPH.1/T1
E1 line code parameters for MPH.1/E1.
This parameter has the same values as dsx1LineCoding in T1/E1
MIB (RFC-1406). The parameters in dsx1LineCoding are:
dsx1JBZS (1)
dsx1B8ZS (2)
dsx1HDB3 (3)
dsx1ZBTSI (4)
dsx1AMI (5)
other (6)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.6 |
prtExPh1MlLineLenThis attribute is the line length parameter used only for T1/DSU
interfaces.
lenXXXpXXXft = len-XXX-XXXft.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.7 |
prtExPh1MlRestoreTimeThe time passing from the disappearance of the loss of
synchronization condition (red alarm) to the restoration of
normal service. The options 1secFast(2) and 10sec62411(3)
for E1 interfaces are proprietary implementation of the T1
standard to the E1 interface.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.8 |
prtExPh1MlTxGainThis attribute is the tx gain parameter used only for
T1/CSU interfaces.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.9 |
prtExPh1MlRxSensitivityThis attribute is the rx line sensitivity parameter.
low26dBm, high36dBm - applicable for T1-CSU
shortHaul, longHaul - applicable for MTML-4 cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.10 |
prtExPh1MlIdleCodeDetermines the code for transmission in empty time slots.
Type value(00-FFH), Excluding 0H,8H,10H,12H,21H,24H,42H,49H,
84H,92Hrw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.1.1.11 |
prtExPh1MlTdmTrunkThis attribute indicates whether the port is used to transfer
TDM cards data and through which Bus.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.12 |
prtExPh1MlClkModeDefines the clock operation mode of the T1/E1 interface.
Ports that are connected to the TDM Buses must be in
nodalTiming(3) clock mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.13 |
prtExPh1MlMfClkSrcSltThis attribute indicates whether the port Tx multiframe is
synchronized with Rx multiframe of another port and the slot
position of that port.
This operation is required in order to bypass signaling of
PCM voice channels. Its value is always local(2) when the port
isn't connected to any TDM bus. When it's value is local(2)
there is no meaning to 'prtExPh1MlMfClkSrcPrt' parameter.
In the ?004 Unit the entries io6(10)..io16) are not validrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.14 |
prtExPh1MlMfClkSrcPrtA unique number to identify a port position in the mux. It
has no effect when the prtExPh1MlMfClkSrcSlt selected is Local.
inPrt1 - for MTML-H/E1 cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.15 |
prtExPh1MlFdlTypeA unique number to identify the side of the FDL operation.
Normal: 'response' for the user side and 'command' for the PTT
side.
Applicable only when working with ESF-T1 linkrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.16 |
prtExPh1MlInbandMngA unique number to identify an Inband management over the
link.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.17 |
prtExPh1MlInbandMngRateA unique number to identify the rate of the Inband
management.
E1 port - it is not applicable when prtExPh1MlInbandMng
selected is off.
T1 port - it is not applicable when prtExPh1MlInbandMng
selected is off OR fdlOrTs0.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.18 |
prtExPh1MlRedundTypeThis object determines the ML redundancy type:
none - no ML redundacy
dualCableAIS - each ML card is connected by a separate
dualCableParallelTx cable to the other MUX (two cables
connect two MUXes). There are two
types of dual redundancy.
yCable - Y cable is connected to both ML cards (one cable
connects two MUXes).
Default=none
When only one ML card exists, the type can be only 'none'.
The value should be the same for both ML slots.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.19 |
prtExPh1MlRedundSlotThis object indicates the slot containing the redundacy ML
card, coupled with the current ML (prtExPh1MlSltIdx).
When prtExPh1MlRedundType=none (no ML redundancy) this
object will be 'notApplicable'.
In the ?004 Unit the entries io6(10)..io12(16) are not valid
When value is not 'none', it should be mutual to the
redundant ML slot.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.20 |
prtExPh1MlRedundPortThis object indicates the redundacy ML port, coupled with the
current ML port (prtExPh1MlPrtIdx).
When prtExPh1MlRedundType=none (no ML redundancy) this
object will be 'notApplicable'.
When value is not 'none', it should be mutual to the
redundant ML port.
inPrt1 - for MTML-H/E1 cards.
exPrt2..exPrt4 - for MTML-4 cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.21 |
prtExPh1MlRedundRecTimeRedundancy Recovery Time (sec). After switching the ML card
to the current (prtExPh1MlSltIdx), the next ML switch can
be performed only after a minimum time, indicated by
this object.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.1.1.22 |
prtExPh1MlInbandMngRoutProtThis attribute indicates the Inband Mng routing protocol of
the port.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.23 |
prtExPh1MlIfTypeInterface type of the port.
For T1 - csu, dsu are the valid values
For E1 - dsu, ltu are the valid values.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.1.1.24 |
prtExPh1MlTsTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExPh1MlTsEntry .1.3.6.1.4.1.164.3.2.3.2.2.2 |
prtExPh1MlTsEntry PrtExPh1MlTsEntry .1.3.6.1.4.1.164.3.2.3.2.2.2.1 |
prtExPh1MlTsCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.2.1.1 |
prtExPh1MlTsSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.2.1.2 |
prtExPh1MlTsPrtIdxThis attribute indicates a unique port number.
MPH.1/E1 and MPH.1/T1 cards have only one external interface.
exPrt2 - for ME1-2, MT1-2 and mhsPri cards.
exPrt3, exPrt4 - for mhsPri cards.
inPrt1 - for MTML-H/E1 cards.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.2.1.3 |
prtExPh1MlTsIdxThis attribute indicates a unique time slot position.
The valid time slots are 1..24 for T1 Card and
1..31 for E1 interface. In G732S-E1 lines time slot 16 is not
valid for data, it is dedicated for multiframe synchronization bits
and voice signaling.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.2.1.4 |
prtExPh1MlTsIConSlotThis attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card
it is connected.
In the ?004 Unit the entries io6(10)..io16) are not valid.
split - will be used when the Src TS is connected to more
than one slot OR more than one port (each needing
less than a whole TS).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.2.1.5 |
prtExPh1MlTsIConPrtThis attribute indicates the internally (In Mux)
connected/routed port.
For MP, the values will be:
{
exPrt1 (1) ,
exPrt2 (2) ,
exPrt3 (3) ,
exPrt4 (4) ,
exPrt5 (5) ,
exPrt6 (6) ,
exPrt7 (7) ,
exPrt8 (8) ,
exPrt9 (9) ,
exPrt10 (10) ,
exPrt11 (11) ,
exPrt12 (12) ,
noConnect (100),
inPrt1 (101) ,
inPrt2 (102) ,
inPrt3 (103) ,
inPrt4 (104) ,
inPrt5 (105) ,
inPrt6 (106) ,
inPrt7 (107) ,
inPrt8 (108) ,
inPrt9 (109) ,
inPrt10 (110) ,
inPrt11 (111) ,
inPrt12 (112)
}rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.2.1.6 |
prtExPh1MlTsIConTsThis attribute indicates a unique time slot position.
The valid time slots are 1..24 for T1 Card and
1..31 for E1 interface. In G732S-E1 lines time slot 16 is not
valid for data, it is dedicated to multiframe synchronization
and voice signaling.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.2.1.7 |
prtExPh1MlTsExtA pointer to an extension of this table:
prtExTsSplitTable.
- If prtExPh1MlTsIConSlot='split', its value
should be set to the OBJECT IDENTIFIER of the
prtExTsSplitTable, with its relevant CnfgIdx,
SltIdx, PrtIdx, TsIdx and 1st TsBit.
- If prtExPh1MlTsIConSlot is not 'split', its value
should be set to the OBJECT IDENTIFIER { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.2.2.1.8 |
prtInPh1MlCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInPh1MlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.2.3 |
prtInPh1MlCnfgEntry PrtInPh1MlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.2.3.1 |
prtInPh1MlCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.1 |
prtInPh1MlSltTypeThis attribute indicates a unique slot position where
the card is inserted.
For ISDN BRI port of MX300/30:
io1(5) = isdn1(5) and io2(6) = isdn2(6)
In the ?004 Unit the entries io6(10)..io12(16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.2 |
prtInPh1MlPrtIdxThis attribute indicates a unique port number.
MPH.1/E1 and MPH.1/T1 cards have three internal interfaces.
MX3000 modules may have up to 50 internal ports.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.3 |
prtInPh1MlConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.4 |
prtInPh1MlRateThis attribute indicates the port speed.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.5 |
prtInPh1MlProtocolThis attribute indicates the applied protocol.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.6 |
prtInPh1MlConnectionTypThis attribute indicates the link connection type.
It is required for three reasons:
FR/CR Inband management operation (LMI,CLMM...).
CIR check.
NMS network management.
SameNetManaged - indicates network internal line.
SameNetNotMana - indicates network internal line, but the remote
mux is not managed by the nms.
User - User to Network Interface.
OtherNet - Network To Network Interfce.
PubNet - Access Mux To PubNet Interface.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.7 |
prtInPh1MlCongResponseThis attribute indicates how to handle the congestion indication
to/from the mux internal connection side (for example
transmit/receive becn to/from the network).
no - do nothing
FlowControl - translate the congestion indication between the
port and the internal connection port according to
the definition of the prtInPh1MlFlowControl
parameters. The operation is done in both directions.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.8 |
prtInPh1MlCongLevelThis attribute indicates the level of delayed data in
precents of the total available dynamic memory,
for which the port will start to operate .
The resolution of the parameter is 5 percent.
Valid values: 10..70, 255.
255=notApplicable.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.9 |
prtInPh1MlTcThis attribute indicates the Tc parameter which is the time
period of the sliding window in which the Bc/Be are tested.
The value of this parameter is identical for all the ports in the
specific card.
255=notApplicable.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.10 |
prtInPh1MlFlowControlThis attribute indicates the required flow control betweeen
the port and the remote equipment.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.11 |
prtInPh1MlSegmentThis object is the Segmentation in Bytes.
In protocol FR+, ISDN internals, MX 30/300 the segmentation is:
50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6)
In MX 3000/4:
For protocol FR+ (internal ISDN ports of MHS.S, MHS.U, MHS.E1, MHS.T1
cards) segmentation values are:
236 (7),472 (8), 708 (9), 944 (10) ,1180 (11)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.12 |
prtInPh1MlFrMngProtThis object indicates the Frame-Relay management protocol.
ansiT1 = ANSI T1.617 Annex D (this is the default value).
This parameter is applicable only for FR and FR+ protocols.
When prtInPh1MlConnectionTyp = sameNetManaged, this object
will be RO (internally determined).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.13 |
prtInPh1MlEnqPeriodThis object is the Status Enquiry Period, in seconds.
It determines the frequency of the Status Enquiry message
as sent by the FR user side.
At the FR network side, it determines the timeout for this
message reception.
Default = 4 seconds.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtInPh1MlFrMngProt is NOT (notApplicable or none).
0=notApplicable.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.14 |
prtInPh1MlFullRptPeriodThis object is the Full Report Frequency.
It determines the number of the Status Enquiry messages
sent by the FR user side, before a Full Report Request is
sent.
The units are : Status Enquiry messages (periods).
Valid values: 1 .. 255.
255 = infinite (never sent).
This parameter is applicable only for FR and FR+ protocols
AND
only when prtInPh1MlFrMngProt is NOT (notApplicable or none).
0=notApplicable.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.15 |
prtInPh1MlFrWindowSizeThis object is the FR Window Size.
It determines the number of samplings in the sliding window
that counts the errors.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtInPh1MlFrMngProt is NOT (notApplicable or none).
0=notApplicable.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.16 |
prtInPh1MlErrorsThresholdThis object is the Max Errors.
It determines the number of Status Enquiry Errors that
occured within the FR sliding window, before this port is
considered DOWN (threshold).
This parameter is applicable only for FR and FR+ protocols
AND
only when prtInPh1MlFrMngProt is NOT (notApplicable or none).
0=notApplicable.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.17 |
prtInPh1MlMaxIdleTimeMove to higher prioritized connected link after this period of
seconds of silence on the current link.
0=Never. Never move to higher prioritized connected link.
UNIT is seconds.
Valid values are: 0, 1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60, 120, 180, 240, 300,
360, 420, 480, 540, 600, 900, 1200, 1500, 1800.
Attempt to Set an invalid value will result in getting the default value.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.18 |
prtInPh1MlBearerChDefines which B (bearer) channels are used for transferring ISDN data.
Default value is: none (255).
anyChannel (2) is skipped because it is not in use here.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.19 |
prtInPh1MlAssociatedExChThis object indicates the external port associated to this internal
port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which
can have up to 64 dynamic internal ports associated with External ports.
For ISDN cards, the value will be: notApplicable (255).
The associated external of an ISDN internal port is represented
by the MIB object: prtIsdnDirectoryPrtNu.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.20 |
prtInPh1MlClockEncodingThis object is the Encoding type of the Line.
This parameter is applicable only for FR and FR+ protocols.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.21 |
prtInPh1MlMinSeparatorsMinimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicablerw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.3.1.22 |
prtInPh1MlCcittCrcThis object indicates how many Bits are used for CRC (HDLC item).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.23 |
prtInPh1MlFrameSeparatorThis object indicates what should be transferred on the line when there
are no frames to pass (HDLC item).
idles: mean that FF will pass on the line
flags: mean that 7E will pass on the line.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.3.1.24 |
prtInPh1MlDlciTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInPh1MlDlciEntry .1.3.6.1.4.1.164.3.2.3.2.2.4 |
prtInPh1MlDlciEntry PrtInPh1MlDlciEntry .1.3.6.1.4.1.164.3.2.3.2.2.4.1 |
prtInPh1MlDlciCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.4.1.1 |
prtInPh1MlDlciSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.2 |
prtInPh1MlDlciPrtIdxThis attribute indicates a unique internal port number.
MPH.1/E1 and MPH.1/T1 cards have three internal ports.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.3 |
prtInPh1MlDlciIdxThis attribute indicates a unique index for each possible
used dlci(16..991). When the protocol is not Multiplexing
protocol, then its type is 'user' and the only valid index
is 1.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.4.1.4 |
prtInPh1MlDlciValidThis attribute indicates whether the attributes in this entry
are valid or not. The user can add/delete pvc (dlci to dlci
connection) by modifing this objectrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.5 |
prtInPh1MlDlciIConSltThis attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to.
In the ?004 Unit the entries io6(10)..io16) are not validrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.6 |
prtInPh1MlDlciIConPrtThis attribute indicates a unique port id which the dlci is
routed to.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.7 |
prtInPh1MlDlciIConDlciThis attribute indicates a unique internal connection dlci
number which the src dlci is routed to.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.4.1.8 |
prtInPh1MlDlciTxBcThis attribute indicates a unique Tx committed bandwidth on
the user transmit line or at the port receive line.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.9 |
prtInPh1MlDlciTxBeThis attribute indicates a unique Tx excess bandwidth on the
user transmit line or at the port receive line.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.10 |
prtInPh1MlDlciRxBcThis attribute indicates a unique Rx committed bandwidth on
the user receive line or at the port transmit line.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.11 |
prtInPh1MlDlciRxBeThis attribute indicates a unique Rx excess bandwidth on the
user receive line or at the port transmit line.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.12 |
prtInPh1MlDlciPriorityThis attribute indicates a unique priority of the pcv.
1 is the lowest priority and 8 is the highest priority.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.4.1.13 |
prtInPh1MlDlciStatusThis attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as
not connectedro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.4.1.14 |
prtPhMlCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtPhMlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.2.5 |
prtPhMlCnfgEntry PrtPhMlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.2.5.1 |
prtPhMlCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.5.1.1 |
prtPhMlSltIdxThis attribute indicates a unique slot position where
the module is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.2 |
prtPhMlPrtIdxThis attribute indicates a unique port number.
ML-20 cards have just one external interface.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.3 |
prtPhMlConnectThis attribute indicates whether the port should be considered
in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.4 |
prtPhMlRateThis attribute indicates the port speed.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.5 |
prtPhMlCASThis attribute indicates whether Channel Associated
Signaling (CAS) is used.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.6 |
prtPhMlClockModeClock mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.7 |
prtPhMlSatBufferSatellite Buffer (+/- 256).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.8 |
prtPhMlDialProcessDial Process.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.9 |
prtPhMlSyncRestoreSync Restoration time, in seconds.
notApplicable=0.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.2.5.1.10 |
prtPhMlBusThe TDM BUS this port is linked to.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.11 |
prtPhMlMfSyncSlotThis attribute indicates whether the sync is synchronized
according to a certain card and the slot of this card.
This operation is required in order to bypass signaling of
PCM voice channels.
In the ?004 Unit the entries io6(10)..io12(16) are not validrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.2.5.1.12 |
prtPhPlCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.3 |
prtExPhPlCnfgTableThe write operation into the Table Objects is
valid only to the TmpCnfg entry. SEQUENCE OF PrtExPhPlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.3.1 |
prtExPhPlCnfgEntry PrtExPhPlCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.3.1.1 |
prtExPhPlCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.1 |
prtExPhPlSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.2 |
prtExPhPlPrtIdxThis attribute indicates a unique port number.
In case of PH.1 card, only exPrt(1) is valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.3 |
prtExPhPlConnectThis attribute indicates whether the port should be considered
in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.4 |
prtExPhPlHRateThis attribute indicates the port speed for HIGH speed cards.
The card has limitations about the maximum sigma channel
speeds and about the possible rates for each clock mode .
N - The rate is valid for DCE and EXT-DCE Nodal clock mode.
L - The rate is valid for DCE and EXT-DCE Local clock mode.
E - The rate is valid for DTE External clock mode.
'r9d6KbpsNLE' means rate of 9.6 Kbps ('d'=dot).
Note: Some rate attributes have been changed. As the MIB was already
released with the old attributes, the names of the options were
not changed. The new names + attributes are in a comment.
Example: r2048KbpsE (63),
::= { prtExPhPlCnfgEntry 5}
prtExPhPlLRate OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (1),
r300bpsNLE (2),
r600bpsNLE (3),
r800bpsNLE (4),
r1200bpsNLE (5),
r2400bpsNLE (6),
r4800bpsNLE (7),
r9600bpsNLE (8),
r14400bpsLE (9),
r19200bpsNLE (10),
r28800bpsLE (11),
r32000bpsNLE (12),
r38400bpsNLE (13),
r48000bpsNLE (14),
r56000bpsNLE (15),
r57600bpsLE (16),
r64000bpsNLE (17),
r112000bps (18),
r115200bps (19),
r16000bpsNLE (20),
r100bpsNLE (21),
r128000bps (22),
r24000bps (23)
}
ACCESS read-write
STATUS mandatory
DESCRIPTIONrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.6 |
prtExPhPlProtocolThis object indicates the applied protocol.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.7 |
prtExPhPlConnectionTypThis attribute indicates the link connection type.
It is required for three reasons:
FR/CR Inband management opration (LMI,CLMM...).
CIR check.
NMS network management.
SameNetManaged - indicates network internal line.
SameNetMotMana - indicates network internal line, but the
remote mux is not managed by the NMS.
User - User to Network Interface.
OtherNet - Network To Network Interface.
PubNet - Access Mux To PubNet Interface.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.8 |
prtExPhPlClkModeClock mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.9 |
prtExPhPlDceClkSrcThis attribute indicates the source of the clock when working
in dce or ext-dce clock mode.
notApplicable(1) - is applied for dte(3) and lbt(5) clock modes.
When clock mode is dte, the clock source is
always external, therefore this object's value is
notApplicable.
local(2) and nodalTiming(3) - are valid in dce(1), extDce(2)
or int(4) clock modes.
The recommended clock source is local(2).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.10 |
prtExPhPlCongResponseThis attribute indicates how to handle the congestion indication
to/from the mux internal connection side (for example
transmit/received becn to/from the network).
no - do nothing
flowControl - translates the congestion indication between the
port and the internal connection port according
to the definition of the prtInPh1MlFlowControl
parameters. The operation is done on both
directions.
toFlowControl- translates the backward congestion indication
received from the internal connection port
(normally the network side) to flow control and
do nothing in the other direction.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.11 |
prtExPhPlCongLevelThis attribute indicates the level of delayed data in
precents of total available dynamic memory,
for which the port will start to operate as congested.
The resolution of the parameter is 5 percent.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.12 |
prtExPhPlTcThis attribute indicates the Tc parameter which is the time
period of the sliding window in which the Bc/Be are tested.
The value of this parameter is identical for all the ports
of a specific card .rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.13 |
prtExPhPlFlowControlThis attribute indicates the required flow control betweeen
the port and the remote equipment.
fecnBecn - is valid only for FR, FR+ and CR protocols.
xonXoff,dtrCts - are valid only for Async protocols.
speedReduction - is valid only for DLC protocol when the
Clock Mode is DCE and the Clock Source is
Local.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.14 |
prtExPhPlDcdRtsProtocol may require end to end connect indication over the
network. End to end link connection establishment over the
FR network will be indicated to the user by using DCD or
RTS control signals, depending on the clock mode: DCE or
DTE respectively.
The options are :
- On :
DCD(DCE)/RTS(DTE) will be constantly ON no matter
if the End to End connection is established or not.
- End to End:
The DCD(DCE)/RTS(DTE) will be according to the status
of the End to End connection.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.15 |
prtExPhPlDcdRtsControlPathProtocol may require end to end connect indication over the
network. This parameter defines whether to take the user
connection status (RTS(DCE)/DCD(DTE)) and forward it to the
network side.
- on : Transmit active connection to the network regardless
the RTS/DCD control lines status.
- off: Transmit active connection to the network according
to the status of the RTS/DCD pin.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.16 |
prtExPhPlDataBitsThis attribute indicates the number of data bits in async
frame.
It is relevant only for Async protocols.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.17 |
prtExPhPlParityThis attribute indicates the parity operation mode in
async frame.
It is relevant only for Async protocols.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.18 |
prtExPhPlStopBitsThis attribute indicates the minimum number of stop bits
in the tx async frame.
It is relevant only for Async protocols.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.19 |
prtExPhPlLXonThis attribute indicates the character used as X-On to
notify receive enable.
This parameter is valid only for async protocols.
Valid values: 0..255.
The value 256 indicates that it's not applicablerw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.20 |
prtExPhPlLXoffThis attribute indicates the character used as X-Off to
notify receive disable.
This parameter is valid only for async protocols.
Valid values: 0..255.
The value 256 indicates that it's not applicablerw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.21 |
prtExPhPlFrMngProtThis object indicates the Frame-Relay management protocol.
ansiT1 = ANSI T1.617 Annex D (this is the default value).
This parameter is applicable only for FR and FR+ protocols.
When prtExPhPlConnectionTyp = sameNetManaged, this object
will be RO (internally determined).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.22 |
prtExPhPlEnqPeriodThis object is the Status Enquiry Period, in seconds.
It determines the frequency of the Status Enquiry message
as sent by the FR user side.
At the FR network side, it determines the timeout for this
message reception.
Default = 4 seconds.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtExPhPlFrMngProt is NOT (notApplicable or none).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.23 |
prtExPhPlFullRptPeriodThis object is the Full Report Frequency.
It determines the number of the Status Enquiry messages
sent by the FR user side, before a Full Report Request is
sent.
The units are : Status Enquiry messages (periods).
Valid values: 1 .. 255.
255 = infinite.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtExPhPlFrMngProt is NOT (notApplicable or none).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.24 |
prtExPhPlFrWindowSizeThis object is the FR Window Size.
It determines the number of samplings in the sliding window
that counts the errors.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtExPhPlFrMngProt is NOT (notApplicable or none).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.25 |
prtExPhPlErrorsThresholdThis object is the Max Errors.
It determines the number of Status Enquiry Errors that
occured within the FR sliding window, before this port is
considered DOWN (threshold).
This parameter is applicable only for FR and FR+ protocols
AND
only when prtExPhPlFrMngProt is NOT (notApplicable or none).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.26 |
prtExPhPlPvcCreateMsgThis object is Update Message (if required or not).
It determines whether a message of a New PVC Creation is
requested or not (yes/no).
Default = no.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtExPhPlFrMngProt is NOT (notApplicable or none).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.27 |
prtExPhPlCllmMsgThis object is CLLM Message (if required or not).
It determines whether to send (or not) a congestion message
when the port is Rx congested.
Default = no.
This parameter is applicable only for FR and FR+ protocols
AND
only when prtExPhPlFrMngProt is NOT (notApplicable or none).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.28 |
prtExPhPlProtDelayLevelThis object is the Segmentation in Bytes.
In some cases, the enumerated values will mean
other segmentation values than specified:
Product: MX-3000 MX-3000 MX-300/MX-30
Protocol: FR+ Transparent FR+
-
level 1 50 Bytes 44 Bytes 50 Bytes
level 2 158 Bytes 155 Bytes 158 Bytes
level 3 266 Bytes 266 Bytes 266 Bytes
level 4 376 Bytes 377 Bytes 376 Bytes
level 5 484 Bytes 488 Bytes 484 Bytes
Defval=level 1 value
This parameter is applicable only for FR+ and
transparent protocols.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.29 |
prtExPhPlClockEncodingThis object is the Encoding type of the Line.
This parameter is applicable only for FR and FR+ protocols.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.30 |
prtExPhPlMinSeparatorsMinimum number of bytes separating between two adjacent frames (HDLC item).
0 = notApplicablerw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.1.1.31 |
prtExPhPlCcittCrcThis object indicates how many Bits are used for CRC (HDLC item).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.32 |
prtExPhPlFrameSeparatorThis object indicates what should be transferred on the line when there
are no frames to pass (HDLC item).
idles: mean that FF will pass on the line
flags: mean that 7E will pass on the line.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.1.1.33 |
prtExPhPlDlciTableThe write operation into the Table Objects is valid only
at the TmpCnfg entry. SEQUENCE OF PrtExPhPlDlciEntry .1.3.6.1.4.1.164.3.2.3.2.3.2 |
prtExPhPlDlciEntry PrtExPhPlDlciEntry .1.3.6.1.4.1.164.3.2.3.2.3.2.1 |
prtExPhPlDlciCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.2.1.1 |
prtExPhPlDlciSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.2 |
prtExPhPlDlciPrtIdxThis attribute indicates a unique internal port number.
PH.1/E1 and PH.1/T1 cards have three internal ports.
Stand-alone units may have six such ports.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.3 |
prtExPhPlDlciIdxThis attribute indicates a unique index for each possible
used dlci(16..991). When the protocol is not Multiplexing
protocol, its type is 'user' and the only valid index is 1.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.2.1.4 |
prtExPhPlDlciValidThis attribute indicates whether the attributes in this
entry are valid or not. The user can add/delete pvc (dlci
to dlci connection) by modifing this objectrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.5 |
prtExPhPlDlciIConSltThis attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to.
cl - will represent any of the CL slots. This value can be
selected for multiple DLCIs of the product.
In the ?004 Unit the entries io6(10)..io16) are not validrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.6 |
prtExPhPlDlciIConPrtThis attribute indicates a unique port id which the dlci is
routed to.
clNMS - will be used for NMS SNMP messages. It can be any
port of the CL card.
This value will be selectable only if
prtExPhPlDlciIConSlt='cl' or 'notApplicable'.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.7 |
prtExPhPlDlciIConDlciThis attribute indicates a unique internal connection dlci
number, the dlci is routed to.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.2.1.8 |
prtExPhPlDlciTxBcThis attribute indicates a unique Tx committed bandwidth on
the user transmit line (or at the port receive line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.9 |
prtExPhPlDlciTxBeThis attribute indicates a unique Tx excess bandwidth on the
user transmit line (or at the port receive line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.10 |
prtExPhPlDlciRxBcThis attribute indicates a unique Rx committed bandwidth on the
user receive line (or at the port transmit line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.11 |
prtExPhPlDlciRxBeThis attribute indicates a unique Rx excess bandwidth on the
user receive line (or at the port transmit line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.12 |
prtExPhPlDlciPriorityThis attribute indicates a unique priority of the pcv.
1 is the lowest priority and 8 is the highest priority.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.2.1.13 |
prtExPhPlDlciStatusThis attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as not
connectedro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.2.1.14 |
prtExPhPlModemTableExternal Modem Parameters.
The write operation into the
Table Objects is valid only for the TmpCnfg entry. SEQUENCE OF PrtExPhPlModemEntry .1.3.6.1.4.1.164.3.2.3.2.3.3 |
prtExPhPlModemEntry PrtExPhPlModemEntry .1.3.6.1.4.1.164.3.2.3.2.3.3.1 |
prtExPhPlModemCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.3.1.1 |
prtExPhPlModemSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.3.1.2 |
prtExPhPlModemPrtIdxThis attribute indicates a unique port number.
In case of PH.1 card, only exPrt(1) is valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.3.1.3 |
prtExPhPlModemStatusThis object indicates whether a Dial Up Modem is enabled
on this port.
Default: disablerw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.3.1.4 |
prtExPhPlModemActivateThis object indicates whether the Dial Up Modem is activated when
the first frame is received or it is always activated.
Default: onFirstFramerw Enumeration .1.3.6.1.4.1.164.3.2.3.2.3.3.1.5 |
prtExPhPlModemMaxIdleTimeMax Time allowed in Seconds without any traffic before the line
is disconnected.
Legal Values are: 1 sec, 2 sec .. 5 sec, 10 sec, 20 sec..
1 min, 2 min .. 10 min, 15 min, 20 min, 25 min, 30 min.
65535 sec. means that this parameter is not applicable.
Default: 1 sec.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.3.1.6 |
prtExPhPlModemTimeBtwnCallsMinimum Time in Seconds which is required after a call was
disconnected. In this time no other call will be initiated
from this Modem port even if there were frames transmitted
to this port. This time is required for some Modems which
have initializations that take a few seconds.
Legal Values are:
0 sec. - 30 sec., 1-5 min.
65535 sec. means that this parameter is not applicable.
Default: 0 secrw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.3.1.7 |
prtExPhPlModemCallDelayTime in Seconds that the device will wait before dialing to the remote
device.
This feature is mostly used when there is a backup modem to the
main link and the main link is down. In this case it is important to prevent
the 2 devices from dialing through the backup modems to each other at the same time.
It is advised to configure one side with a small call delay and the other side
with a large call delay.
Legal Values are:
0 - 30, 60, 120, 180, 240, 300, 600, 900, 1200, 1500, 1800 .
65535 sec. means that this parameter is not applicable.
Default: 0 secrw INTEGER .1.3.6.1.4.1.164.3.2.3.2.3.3.1.8 |
prtLs2Cnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.4 |
prtExLs2CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExLs2CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.4.1 |
prtExLs2CnfgEntry PrtExLs2CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.4.1.1 |
prtExLs2CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.4.1.1.1 |
prtExLs2SltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.2 |
prtExLs2PrtIdxThis attribute indicates a unique port index.
For the Ls2/X.58 exPrt(7)..exPrt(10) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.3 |
prtExLs2ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.4 |
prtExLs2RatePort rates.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.5 |
prtExLs2ClkModeThis attribute indicates a unique port operation clock mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.6 |
prtExLs2CtsCTS.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.7 |
prtExLs2DcdDCD.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.1.1.8 |
prtExLs2EnvIdxEnvelope Index.
When prtInLs2EnvAssign=auto, the value is 0 (not applicable).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.4.1.1.9 |
prtInLs2CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInLs2CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.4.2 |
prtInLs2CnfgEntry PrtInLs2CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.4.2.1 |
prtInLs2CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.4.2.1.1 |
prtInLs2SltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.2.1.2 |
prtInLs2PrtIdxThis attribute indicates a unique internal port index.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.2.1.3 |
prtInLs2ConnectThis attribute indicates whether the port should be considered in
any of the mux algorithms. It also affects all the module
considerations because the module has only one Internal
interface which is the composite channel.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.2.1.4 |
prtInLs2GroupThis attribute indicates the group number of the port.
LS-2 internal ports with the same group number share the same Time slot of the main
linkrw INTEGER .1.3.6.1.4.1.164.3.2.3.2.4.2.1.5 |
prtInLs2MemberThis attribute indicates the group member id of the port.
This parameter is for the automatic envelope assignment
algorithm.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.4.2.1.6 |
prtInLs2LinkToIt indicates the slot of the main link card to which the
LS2 card is mapped.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.2.1.7 |
prtInLs2EnvAssignEnvelope assignment type.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.4.2.1.8 |
prtVc2CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtVc2CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.5 |
prtVc2CnfgEntry PrtVc2CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.5.1 |
prtVc2CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.5.1.1 |
prtVc2SltIdxThis attribute indicates a unique slot position where
the card is inserted.
For Stand Alone products like WR: notApplicable (255)ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.2 |
prtVc2PrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.3 |
prtExVc2ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.4 |
prtExVc2TransGainTransmit gain in dBm.
For ports of VC-6A and VC-6AG cards, the units will be 0.1dBm
because valid values can be in 0.5dBm steps.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.5.1.5 |
prtExVc2ReceiveGainReceive gain in dBm.
For ports of VC-6A and VC-6AG cards, the units will be 0.1dBm
because valid values can be in 0.5dBm steps.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.5.1.6 |
prtExVc2WireThis object is equal for all the ports in the specific
card because of HW limitations.
For FXO & FXS this parameter is not applicable.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.7 |
prtExVc2CodingLawThis attribute indicates the Method/Law for decoding/encoding the voice
information.
aLaw(1) is the standard Law for E1 links.
uLaw(2) is the standard Law for T1 links.
This object is equal for all the ports in the specific module because
of HW limitationsrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.8 |
prtExVc2SigThis attribute indicates the method for decoding/encoding the signaling
information(on/off hook).
noSignaling (1) - not using signaling (only voice).
robbedBitMultiFrame(2) - is the standard method for T1 links and
proprietary method for E1 links.
chAssociatedE1 (3) - is valid only for E1 G.732S links.
robbedBitFrame (4) - is proprietary method implimenting 7 bit for
the voice and 1 bit dedicated for signaling.
This object is equal for all the ports in the specific module because
of HW limitations.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.9 |
prtExVc2OosThis object is equal for all the ports in the specific card
because of HW limitationsrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.10 |
prtExVc2LinkToThis attribute indicates the slot of the ML card to which
the VC card is mapped.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.11 |
prtExVc2OperModeThis object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.12 |
prtExVc2SigProfileThis object indicates the Signaling Profile of the port.
notApplicable - for VC-2 family and when
prtExVc2Sig=noSignaling(1)
p1 = profile 1
p2 = profile 2
p3 = profile 3
p4 = profile 4rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.13 |
prtExVc2CallEnableThis object indicates the Enabled Call direction.
notApplicable - for all cards except VC-2/R2.
both - incoming + outgoing.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.14 |
prtExVc2R2DelayThis object indicates the R2 Delay.
notApplicable - for all cards except VC-2/R2.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.15 |
prtExVc2CasStdThis object indicates the CAS (Channel Associated Signaling)
Standard.
notApplicable - for all cards except VC-2/R2.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.16 |
prtExVc2EchoCancelerEcho canceler activation.
notApplicable - for VC-2 and VC-6 cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.17 |
prtExVc2IfTypeInterface Type.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.18 |
prtExVc2EncodingVoice Encoding Mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.19 |
prtExVc2TxBitCode- - - For MP & FCD - - -
This object represents 4 parameters, by 2 Octets :
Tx D Bit Code-MSB nibble,
Tx C Bit Code- nibble,
Tx B Bit Code- nibble,
Tx A Bit Code-LSB nibble.
Each nibble:
0 hex = 0000 = Not Applicable
1 hex = 0001 = M lead
2 hex = 0010 = M lead inverse
3 hex = 0011 = Reverse Polarity
4 hex = 0100 = Metering Pulse
5 hex = 0101 = Forced 1
6 hex = 0110 = Forced 0
7-F hex - not used (invalid values)
This object will be RO if prtExVc2SigProfile is NOT manual.
- - - For WR II - - -
This object represents the following 4 parameters by 2 Octets:
1. On/Off hook signaling transmission mode from the FXS towards the T1/E1 (MSB nibble 1).
2. Default signaling bits that are not in use (nibble 2).
3. Ring Detection signaling transmission mode from the FXO towards the T1/E1(nibble 3).
4. M (Mouth) Signaling transmission mode from the E&M towards the T1/E1(LSB nibble 4).
Each nibble:
Value On/Off Hook Default sig. Ring Detect. M (Mouth)
0 hex = 0000 Not Applicable Not Applicable. Not Applicable Not Applicable
1 hex = 0001 Tx A bit Values 1-3 are Tx A bit Tx A bit
2 hex = 0010 Tx A bit inverse for On/Off Hook Tx A bit inv. Tx A bit inv.
3 hex = 0011 Tx B bit A,B,A Inv,B Inv. Tx B bit Tx B bit
4 hex = 0100 Tx B bit inverse Values 4-7 are Tx B bit inv. Tx B bit inv.
5 hex = 0101 not Used-invalid for On/Off Hook not Used-invalid not Used-invalid
6 hex = 0110 not Used-invalid A, A Inverse. not Used-invalid not Used-invalid
7 hex = 0111 not Used-invalid not Used-invalid not Used-invalid
8 hex = 1000 not Used-invalid Values 8-11 are not Used-invalid not Used-invalid
9 hex = 1001 not Used-invalid for On/Off Hook not Used-invalid not Used-invalid
A hex = 1010 not used-invalid B, B Inverse. not Used-invalid not Used-invalid
B hex = 1011 not used-invalid The Bits order: not Used-invalid not Used-invalid
C-F hex not used-invalid ABCD not Used-invalid not Used-invalid
Default value: 11 11rw OCTET STRING .1.3.6.1.4.1.164.3.2.3.2.5.1.20 |
prtExVc2RxBitOutput- - - For MP & FCD - - -
This object represents 3 parameters by 2 Octets:
Spare -MSB nibble, always=0 hex
E Lead Output - nibble,
Reverse Polarity Output- nibble,
Metering Pulse Output -LSB nibble.
Each nibble:
0 hex = 0000 = Not Applicable
1 hex = 0001 = Rx A bit
2 hex = 0010 = Rx A bit inverse
3 hex = 0011 = Rx B bit
4 hex = 0100 = Rx B bit inverse
5 hex = 0101 = Rx C bit
6 hex = 0110 = Rx C bit inverse
7 hex = 0111 = Rx D bit
8 hex = 1000 = Rx D bit inverse
9 hex = 1001 = none
A-F hex - not used (invalid values)
This object will be RO if prtExVc2SigProfile is NOT manual.
- - - For WR II - - -
This object represents the following 2 parameters in 1 Octet:
1. On/Off hook signaling receive mode from the T1/E1 into the FXS/FXO (MSB nibble 1).
2. E (Ear) Signaling receive mode from the T1/E1 into the E&M (LSB nibble 2).
Each nibble:
Value On/Off Hook E (Ear)
0 hex = 0000 Not Applicable Not Applicable
1 hex = 0001 Rx A bit Rx A bit
2 hex = 0010 Rx A bit inverse Rx A bit inverse
3 hex = 0011 Rx B bit Rx B bit
4 hex = 0100 Rx B bit inverse Rx B bit inverse
5-F hex not used-invalid not Used-invalid
Default value: 11rw OCTET STRING .1.3.6.1.4.1.164.3.2.3.2.5.1.21 |
prtExVc2MeterRateThis entry is applicable only for VC-6A/FXO and VC-6A/FXS.
Meter Rate means rate of Call Meter in Public Phones, in KHz units.
Must be the same for all card's ports.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.22 |
prtExVc2IfSignalingThis entry is applicable only for VC-6A and VC-6AG cards.
Interface Analog Signaling.
Must be the same for all card's ports.
loopStart - for the usual trunk/phone types.
groundStart - for trunks that need Ground signaling (applicable
for VC-6AG cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.23 |
prtExVc2SeizeAckThis parameter shows whether the device will acknowledge
a seize signal (On/Off Hook).
When the value is set to yes(3) & the device receives an on/off hook signal
it will transmit back an on/off hook signal.
When the value is set to no(2) & the device receives an on/off hook signal
it will NOT transmit back an on/off hook signal.
Default value for WR FXO: no(2).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.24 |
prtExVc2EandMTypeThis is the signaling type on the E&M analog side.
The analog signaling includes voltage, no. of pins and other parameters.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.5.1.25 |
prtHsfCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtHsfCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.6 |
prtHsfCnfgEntry PrtHsfCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.6.1 |
prtHsfCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relate to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.6.1.1 |
prtHsfSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.2 |
prtHsfPrtIdxThis attribute indicates a unique external port index.
Hs2 has only two ports (exPrt1,exPrt2).
Hs3 has three ports (exPrt1,exPrt2,exPrt3).
Hsq and hsqN has four ports.
Hs6 has six external ports.
Hs12 has twelve external ports.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.3 |
prtExHsfConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.4 |
prtExHsfRateThis attribute indicates the port speed.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.5 |
prtExHsfClkModeThis attribute indicates a unique port operation clock mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.6 |
prtExHsfCtsThis attribute indicates a unique CTS control line
operation mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.7 |
prtExHsfFifoSizeSize in bits.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.8 |
prtExHsfLinkToThis attribute indicates a slot of Main Link module, that the
port is linked to. This object is the same for all the
ports in the specific card because of HW limitations.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.9 |
prtExHsfOperModeThis object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.10 |
prtExHsfInbandLoopbackThis object indicates if Inband Loopback from the Network
should be enabled or disabled.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.11 |
prtExHsfClkPolarityThis object indicates the clock polarity.
For FCD-M this object will be applicable only for the fixed HS port
(the fixed port on the device).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.6.1.12 |
prtHs4Cnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.7 |
prtExHs4CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExHs4CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.7.1 |
prtExHs4CnfgEntry PrtExHs4CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.7.1.1 |
prtExHs4CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.7.1.1.1 |
prtExHs4SltIdxThis attribute indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.2 |
prtExHs4PrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.3 |
prtExHs4ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithm. It also affects
all the module considerations because the card has only
one external (physical) interface.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.4 |
prtExHs4LineTypeThis attribute is the line type parameter for T1/E1
interface.
The user should select only the parameters relevant to the
specific card:
T1 line code parameters for the HS-4/1 and
E1 line code parameters for the HS-4/2.
This parameter has the same values as dsx1LineType in T1/E1
MIB (RFC-1406). The parameters in dsx1LineType are:
other (1)
dsx1ESF (2)
dsx1D4 (3)
dsx1E1 (4)
dsx1E1-CRC (5)
dsx1E1-MF (6)
dsx1E1-MF-CRC (7)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.5 |
prtExHs4LineCodeThis attribute is the line code parameter used for T1/E1
interface.
The user should select only the parameters relevant to the
specific card:
T1 line code parameters for the MPH.1/T1 and
E1 line code parameters for the MPH.1/E1.
This parameter has the same values as dsx1LineCoding in T1/E1
MIB (RFC-1406). The parameters in dsx1LineCoding are:
dsx1JBZS (1)
dsx1B8ZS (2)
dsx1HDB3 (3)
dsx1ZBTSI (4)
dsx1AMI (5)
other (6)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.6 |
prtExHs4LineLenThis attribute is the line length parameter used only for
T1 interfaces.
len399p533ft=len-399-533ftrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.7 |
prtExHs4RestoreTTime passing from the disappearance of the loss of
synchronization condition (red alarm), to the restoration
of normal service.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.8 |
prtExHs4OosSigOut of Service signal type.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.9 |
prtExHs4OosCodeOOS Coderw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.10 |
prtExHs4IdleCodeType value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H,
42H,49H,84H,92Hrw INTEGER .1.3.6.1.4.1.164.3.2.3.2.7.1.1.11 |
prtExHs4MfClkSrcSltThis attribute indicates whether the port Tx is multiframe
synchronized with Rx multiframe of another port and the slot position of that port.
This opration is required in order to bypass signaling of PCM
voice channels.
When its value is Local(2) there is no meaning to 'prtExHs4MfClkSrcPrt'
parameter.
In the ?004 Unit the entries io6(10)..io16) are not validrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.12 |
prtExHs4MfClkSrcPrtA unique number to identify a port position in the mux if the
MultiFrame clock source is valid (YES).
inPrt1 - for MTML-H/E1 cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.1.1.13 |
prtExHs4TsCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExHs4TsEntry .1.3.6.1.4.1.164.3.2.3.2.7.2 |
prtExHs4TsEntry PrtExHs4TsEntry .1.3.6.1.4.1.164.3.2.3.2.7.2.1 |
prtExHs4TsCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.7.2.1.1 |
prtExHs4TsSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.2.1.2 |
prtExHs4TsPrtIdxThis attribute indicates a unique port number.
Hs4/T1 and Hs4/T1 cards have only one external interface.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.2.1.3 |
prtExHs4TsIdxThis attribute indicates a unique time slot position.
The valid time slots are:
1..24 for T1 Card and
1..31 for E1 interface.
In G732S-E1 lines, time slot 16 is not valid for data,
it is dedicated to multiframe synchronization bits
and voice signaling.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.7.2.1.4 |
prtExHs4TsIConSlotThis attribute indicates whether the specified time slot is
connected/routed internally in the Agent and to which card
it is connected.
In the ?004 Unit the entries io6(10)..io16) are not valid.
split - will be used when the Src TS is connected to more
than one slot OR more than one port (each needing
less than a whole TS).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.2.1.5 |
prtExHs4TsIConPrtThis attribute indicates the internally (In Mux)
connected/routed port.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.7.2.1.6 |
prtExHs4TsIConTsThis attribute indicates a unique time slot position.
The valid time slots are:
1..24 for T1 Module and
1..31 for E1 interface.
In G732S-E1 lines time slot 16 is not valid for data,
it is dedicated for multiframe synchronization bits
and voice signaling.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.7.2.1.7 |
prtHsiCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.8 |
prtExHsiCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExHsiCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.8.1 |
prtExHsiCnfgEntry PrtExHsiCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.8.1.1 |
prtExHsiCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.8.1.1.1 |
prtExHsiSltIdxThis attribute indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.2 |
prtExHsiPrtIdxA unique prt identifier within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.3 |
prtExHsiConnectThis attribute indicates whether the port should be considered in
any of the mux algorithms.
v51 - this port is connected to a V5.1 interface. All rest of the
values will be 'notApplicable' in this case. V5.1 MIB will be
used instead.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.4 |
prtExHsiRateThis attribute indicates the port speed.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.5 |
prtExHsiLinkToIt indicates the slot of the main link card to which the HS-? card
is mapped.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.6 |
prtExHsiInterfaceIt indicates the interface type:
lt = line termination
nt = network termination
te = terminal equipment.
lt1 - for ASMi-31 connection (not ISDN)
For HS-U/I and HS-U/1 only 'lt' and 'nt' are applicable.
For HS-S , only 'te' and 'nt' are applicable.
For HS-U, this object is not applicable.
For HS-U6, HS-U12, are applicable: 'lt'=lt-i,'nt'=nt-i, lt1.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.7 |
prtExHsiActTypeIt indicates the Activation Type. Activation Type is the Synchronization
type towards the PBX. It is applicable only when prtExHsiInterface=nt.
notApplicable - for cards that do not support this object, or when
prtExHsiInterface is NOT nt.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.1.1.8 |
prtInHsiCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry.
This table is not applicable for HS-U card type. SEQUENCE OF PrtInHsiCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.8.2 |
prtInHsiCnfgEntry PrtInHsiCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.8.2.1 |
prtInHsiCnfgIdxThis object indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.8.2.1.1 |
prtInHsiSltIdxThis object indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.2.1.2 |
prtInHsiPrtIdxA unique port identifier within the card.
Valid values: inPrt1 (101) .. inPrt48 (148).ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.8.2.1.3 |
prtInHsiConnectThis attribute indicates whether the port should be considered in
any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.2.1.4 |
prtInHsiRateThis object indicates the port speed.
For HS-U/I and HS-S ports:
2 bit - up to 9600bps
4 bit - 19200bps
8 bit - 38400bps .. 64kbps.
concentrated - this D channel goes to a Concentration channel,
that represents many channels that this value was
selected for them. The Concentrated channel is an
Internal D Channel of the same card.
This value is applicable only for D channels, except
Concentration channel itself.
will always be: internal-13
is selected via the prtInHsiConcentratedTo object.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.8.2.1.5 |
prtInHsiConcentratedToThe Concentration D Channel of the prtInHsiPrtIdx port.
The port always belongs to the same card as prtInHsiPrtIdx port.
This object is applicable only when prtInHsiRate=concentrated.
Valid values:
- notApplicable: 255
- for HS-S12, HS-U12 cards: inPrt37 (137) .. inPrt48 (148).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.8.2.1.6 |
prtPVc4Cnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.9 |
prtExPVc4CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExPVc4CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.9.1 |
prtExPVc4CnfgEntry PrtExPVc4CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.9.1.1 |
prtExPVc4CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.1 |
prtExPVc4SltIdxThis attribute indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.2 |
prtExPVc4PrtIdxThis object indicates the port number in the selected card
(slot).ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.3 |
prtExPVc4PrtTypeThis object indicates the type of the selected port.
In Mx 30/300: s0 is for Voice over ISDN.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.4 |
prtExPVc4ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.5 |
prtExPVc4IfTypeThis attribute indicates the interface type of the port.
eAndM4wires and eAndM2wires - are valid only for E&M
port type
eAndM4wires - means 2/4 wires
fxoGnd and fxoLoop - are valid only for FXO port type
fxsGnd and fxsLoop - are valid only for FXS port type
e1Framer, e1Slave, t1Framer, t1Slave - are applicable for the mvc4Pbx
cards only.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.6 |
prtExPVc4TxGainTransmission gain in dBm.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.7 |
prtExPVc4RxGainReception gain in dBm.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.8 |
prtExPVc4MaxRateVoice rate.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.9 |
prtExPVc4TcTime interval for CIR control, in seconds. The value will
be the same for all cards' ports.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.10 |
prtExPVc4OosHandling type, when connection is lost.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.11 |
prtExPVc4EchoCancelerEcho canceler activation.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.12 |
prtExPVc4VarDelayMaximum variant delay of the FR network, in msec.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.13 |
prtExPVc4CongLevelThis object indicates the level of delayed data in
precents of total available dynamic memory,
for which the port will start to operate as congested.
The resolution of the parameter is 5%.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.14 |
prtExPVc4WireThis object indicates the wiring of the E&M port.
It is applicable only for E&M card type.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.15 |
prtExPVc4ExtensionTypeThis object indicates the type of extension
relevant to this port.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.16 |
prtExPVc4ExtensionNumberThis is the extension number of this port.
This field is relevant only when the extension
type is voice switching and is read only if the
port is member of a hunt group.rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.9.1.1.17 |
prtExPVc4OutPulsingThis field indicates whether to outpulse the received
digits. It is notApplicable(1) when the extension type
is forceConnect(2).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.18 |
prtExPVc4HuntGroupMbThis object indicates if this port belongs to
an hunt group.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.19 |
prtExPVc4HuntGroupIdxIf it belongs to an hunt group, this fields
indicates the index of the relevant hunt group.
0 = notApplicablerw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.20 |
prtExPVc4AutoFaxModeThis object indicates if the system will switch automatically to
FAX mode when detecting FAX activity.
Default=Yes.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.21 |
prtExPVc4FaxRateFAX initial rate.
Default=9600 bps.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.22 |
prtExPVc4SeizeAckThis parameter shows whether the device will acknowledge
a seize signal (On/Off Hook).
When the value is set to yes(3) & the device receives an on/off hook signal
it will transmit back an on/off hook signal.
When the value is set to no(2) & the device receives an on/off hook signal
it will NOT transmit back an on/off hook signal.
Example:
If Seize Ack Parameter = YES, when the MVC.4 receives a seize signal (Off Hook)
from the PBX it will send an Off Hook to the PBX.
The Seize Parameter is relevant for all the following cards:
MVC-4
MVC-4/E1-Framer
MVC-4/T1-DSU-Framer
MVC-4/T1-CSU-Framer
MVC-4/E1-SLAVE
MVC-4/T1-SLAVE
Default values:
Analog FXS - No (value can't be changed).
Analog FXO - Yes (value can't be changed).
Analog E&M - No (values NO/YES).
Digital E1/T1 Framer & Slave - No.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.23 |
prtExPVc4SignalingProtocolThe signaling protocol that will be used between the PABX & the voice port.
Delay Start Protocol: the line is seized by sending an Off hook signal
and after a delay, if the called party is available (On hook)
DTMF (Dual Tone Multi Frequency) digits are sent towards the called party.
Immediate Start Protocol: the line is seized by sending an Off Hook signal
and immediately DTMF digits are sent towards the called party.
Wink start protocol: the line is seized by sending an Off Hook signal
and then the called party sends a short Off Hook wink signal.
Now the calling party starts sending DTMF digits.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.1.1.24 |
prtExPVc4DelayStartThis parameter is used only for Delay Protocol.
This is the time that the calling party will wait after sending an Off hook
signal and before sending DTMF digits to the called party.
The delay values are 100..4000 msec in intervals of 100 msec.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.25 |
prtExPVc4WinkMinDurationThis parameter is used only for Wink Protocol.
Min Duration of the Wink Signal (off hook duration from the called party).
Legal values: 40..400 msec in intervals of 10 msec.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.26 |
prtExPVc4WinkMaxDurationThis parameter is used only for Wink Protocol.
Max Duration of the Wink Signal (off hook duration from the called party).
Legal values: 40..400 msec in intervals of 10 msec.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.1.1.27 |
prtExPVc4DlciTableThe write operation into the Table Objects is valid only
at the TmpCnfg entry. SEQUENCE OF PrtExPVc4DlciEntry .1.3.6.1.4.1.164.3.2.3.2.9.2 |
prtExPVc4DlciEntry PrtExPVc4DlciEntry .1.3.6.1.4.1.164.3.2.3.2.9.2.1 |
prtExPVc4DlciCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.2.1.1 |
prtExPVc4DlciSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.2 |
prtExPVc4DlciPrtIdxThis attribute indicates a unique internal port number.
VC4 cards have four external ports.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.3 |
prtExPVc4DlciValidThis attribute indicates whether the attributes in this
entry are valid or not. The user can add/delete pvc (dlci
to dlci connection) by modifing this objectrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.4 |
prtExPVc4DlciIConSltThis attribute indicates a unique slot position In the Mux
(Agent) where the dlci is routed to.
In the ?004 Unit the entries io6(10)..io16) are not validrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.5 |
prtExPVc4DlciIConPrtThis attribute indicates a unique port id which the dlci is
routed to.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.6 |
prtExPVc4DlciIConDlciThis attribute indicates a unique internal connection dlci
number, the dlci is routed to.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.2.1.7 |
prtExPVc4DlciTxBcThis attribute indicates a unique Tx committed bandwidth on
the user transmit line (or at the port receive line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.8 |
prtExPVc4DlciTxBeThis attribute indicates a unique Tx excess bandwidth on the
user transmit line (or at the port receive line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.9 |
prtExPVc4DlciRxBcThis attribute indicates a unique Rx committed bandwidth on the
user receive line (or at the port transmit line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.10 |
prtExPVc4DlciRxBeThis attribute indicates a unique Rx excess bandwidth on the
user receive line (or at the port transmit line).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.11 |
prtExPVc4DlciPriorityThis attribute indicates a unique priority of the pvc.
6 is the lowest priority and 8 is the highest priority.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.9.2.1.12 |
prtExPVc4DlciStatusThis attribute indicates the status of the pvc. The status is
disconnected(1) when one of the sides is programmed as not
connectedro Enumeration .1.3.6.1.4.1.164.3.2.3.2.9.2.1.13 |
prtHsrCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.10 |
prtExHsrCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExHsrCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.10.1 |
prtExHsrCnfgEntry PrtExHsrCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.10.1.1 |
prtExHsrCnfgIdxThis object indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.10.1.1.1 |
prtExHsrSltIdxThis object indicates a unique slot position where
the card is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.2 |
prtExHsrPrtIdxA unique prt identifier within the card.
Valid values:
- For HS-R cards: exPrt1 (1) .. exPrt4 (4)
- For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104)
- For HS-S12, HS-S6, HS-U12, HS-U6 cards:
exPrt1 (1) .. exPrt12 (12). This MIB table is used only
for LT-1 interface.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.10.1.1.3 |
prtExHsrConnectThis object indicates whether the port should be considered in
any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.4 |
prtExHsrProtocolThis object indicates the protocol.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.5 |
prtExHsrRateThis object indicates the port speed.
The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync
protocol.
The 57.6 and 115.2 kbps rates are applicable only for Async
protocol.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.6 |
prtExHsrDataBitsData Bits.
This object is applicable for Async protocol only.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.7 |
prtExHsrParity- For HS-R card, this object indicates if the parity bit is needed or not.
Therefore, the 'no' and 'yes; values are applicable.
- For HS-S12, HS-U12, the parity type is selected: no, odd, even.
This object is applicable for Async protocol only.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.8 |
prtExHsrStopBitsThis object indicates the minimum number of stop bits in
the tx async frame.
This object is applicable for Async protocol only.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.9 |
prtExHsrCtsCTS.
This object is applicable for Async protocol only.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.10 |
prtExHsrClkModeClock mode.
This object is applicable for Sync protocol only.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.11 |
prtExHsrLinkToIt indicates the slot of the main link card to which the HS-R card
is mapped.
notApplicable - for HS-U/1 internal ports.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.12 |
prtExHsrDcdDsrDCD & DSR.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.13 |
prtExHsrOperModeThis object indicates the operation mode of the port.
normal = bi-directional (Tx/Rx)
unidirectRx = unidirectional Rx.
broadcast = Tx upon request.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.14 |
prtExHsrRtsDtrRTS & DTR.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.15 |
prtExHsrLlbEnableEnable/Disable LLB.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.16 |
prtExHsrRlbEnableEnable/Disable RLB.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.17 |
prtExHsrRateAdaptRate Adaptation - takes a low rate and adapts it to 64Kbps.
This object specifies the means this adaptation is done by.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.10.1.1.18 |
prtMbeCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.11 |
prtExMbeCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExMbeCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.11.1 |
prtExMbeCnfgEntry PrtExMbeCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.11.1.1 |
prtExMbeCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.11.1.1.1 |
prtExMbeSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.1.1.2 |
prtExMbePrtIdxA unique port identifier within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.1.1.3 |
prtExMbeLanThis attribute indicates whether the MBE port is operated
as main or remote bridge.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.1.1.4 |
prtInMbeCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInMbeCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.11.2 |
prtInMbeCnfgEntry PrtInMbeCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.11.2.1 |
prtInMbeCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.11.2.1.1 |
prtInMbeSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.2.1.2 |
prtInMbePrtIdxA unique port identifier within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.2.1.3 |
prtInMbeConnectThis attribute indicates whether the port should be considered in
any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.2.1.4 |
prtInMbeRateThis attribute indicates the port speed.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.2.1.5 |
prtInMbeLinkToIt indicates the slot of the main link card to which the
MBE card is mapped.
In the ?004 Unit the entries io6(10)..io16) are not valid.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.11.2.1.6 |
prtTreCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.12 |
prtExTreCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExTreCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.12.1 |
prtExTreCnfgEntry PrtExTreCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.12.1.1 |
prtExTreCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.12.1.1.1 |
prtExTreSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.1.1.2 |
prtExTrePrtIdxA unique port identifier within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.1.1.3 |
prtExTreLanThis attribute indicates whether the TRE port is operated
as main or remote bridge.
Default=remote.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.1.1.4 |
prtExTreLanRateThis attribute indicates the Rate of the TRE port
in Mbit/sec.
Default-r4M.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.1.1.5 |
prtInTreCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInTreCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.12.2 |
prtInTreCnfgEntry PrtInTreCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.12.2.1 |
prtInTreCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.12.2.1.1 |
prtInTreSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.2.1.2 |
prtInTrePrtIdxA unique port identifier within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.2.1.3 |
prtInTreConnectThis attribute indicates whether the port should be considered
in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.2.1.4 |
prtInTreRateThis attribute indicates the port speed.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.2.1.5 |
prtInTreLinkToIt indicates the slot of the main link card to which the
MBE card is mapped.
In the ?004 Unit the entries io6(10)..io16) are not valid.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.12.2.1.6 |
prtLs6Cnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.13 |
prtExLs6CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExLs6CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.13.1 |
prtExLs6CnfgEntry PrtExLs6CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.13.1.1 |
prtExLs6CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.13.1.1.1 |
prtExLs6SltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.2 |
prtExLs6PrtIdxThis attribute indicates a unique port index.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.3 |
prtExLs6ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.4 |
prtExLs6ProtocolThis attribute indicates the protocol.
async - can be selected only for ports 1-2.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.5 |
prtExLs6RatePort rates in bps.
g1 - contains the values : (2)-(6),(9),(12),(16)
g2 - contains the values : (7),(10),(14),(19)
g3 - contains the values : (8),(11),(13),(15),(17),(18),(20);
it is not applicable when using Async protocol.
Rates of pair ports (1-2, 3-4, 5-6) must be from the same
group.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.6 |
prtExLs6ClkModeThis attribute indicates a unique port operation clock mode.
It is applicable for Sync protocol only .rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.7 |
prtExLs6CtrlSignalControl Signal.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.8 |
prtExLs6DataBitsData Bits.
This object is applicable for Async protocol only.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.9 |
prtExLs6CtsThis object indicates the CTS control line
operation mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.10 |
prtExLs6LinkToInternalThis object indicates which internal port of the card,
the external port is linked to.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.1.1.11 |
prtExLs6VCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExLs6VCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.13.2 |
prtExLs6VCnfgEntry PrtExLs6VCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.13.2.1 |
prtExLs6VCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.13.2.1.1 |
prtExLs6VSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.2 |
prtExLs6VPrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.3 |
prtExLs6VConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.4 |
prtExLs6VRateRate (bps) used for FAX transmission and Voice coding.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.5 |
prtExLs6VEchoCancelerEcho canceler activation.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.6 |
prtExLs6VIfTypeThis attribute indicates the interface type of the port.
w4wire - is applicable only for E&M port type.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.7 |
prtExLs6VTxGainTransmit gain in dBm.
E&M - values range: -17 .. 8
FXO - values range: -16 .. 4
FXS - values range: -13 .. 8rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.13.2.1.8 |
prtExLs6VRxGainReceive gain in dBm.
E&M - values range: -17 .. 2
FXO - values range: -17 .. -1
FXS - values range: -17 .. 2rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.13.2.1.9 |
prtExLs6VOosOut of Service signaling mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.2.1.10 |
prtInLs6CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInLs6CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.13.3 |
prtInLs6CnfgEntry PrtInLs6CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.13.3.1 |
prtInLs6CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.13.3.1.1 |
prtInLs6SltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.2 |
prtInLs6PrtIdxThis attribute indicates a unique internal port index.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.3 |
prtInLs6ConnectThis attribute indicates whether the port should be considered in
any of the mux algorithms. It also affects all the module
considerations because the module has only one Internal
interface which is the composite channel.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.4 |
prtInLs6TandemModeThis object indicates the Tandem Mode.
tandemSlave - is valid only for an LS-6 card having on
the (current slot-1) an LS-6 card with 'tandemMaster' mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.5 |
prtInLs6RateMain Rate in Kbps.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.6 |
prtInLs6RemoteTypeRemote Type.
notApplicable - when prtInLs6TandemMode=tandemSlaverw Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.7 |
prtInLs6LinkToIt indicates the slot of the main link card to which the
Ls6 card is mapped.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
notApplicable - when prtInLs6TandemMode=tandemSlave.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.13.3.1.8 |
prtVc3Cnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.14 |
prtExVc3CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExVc3CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.14.1 |
prtExVc3CnfgEntry PrtExVc3CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.14.1.1 |
prtExVc3CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.14.1.1.1 |
prtExVc3SltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.1.1.2 |
prtExVc3PrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.1.1.3 |
prtExVc3ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.1.1.4 |
prtExVc3TransGainTransmit gain in dBm.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.14.1.1.5 |
prtExVc3ReceiveGainReceive gain in dBm.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.14.1.1.6 |
prtExVc3WireThis object is equal for all the ports in the specific
card because of HW limitationsrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.1.1.7 |
prtExVc3RateRate in bps.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.1.1.8 |
prtExVc3EchoCancelerEcho canceler activation. The value will be the same for
all the card's external ports.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.1.1.9 |
prtInVc3CnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtInVc3CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.14.2 |
prtInVc3CnfgEntry PrtInVc3CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.14.2.1 |
prtInVc3CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.14.2.1.1 |
prtInVc3SltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.2.1.2 |
prtInVc3PrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.2.1.3 |
prtInVc3ConnectThis attribute indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.2.1.4 |
prtInVc3RateRate in bps.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.2.1.5 |
prtInVc3OosThis object is equal for all the ports in the specific
card because of HW limitationsrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.2.1.6 |
prtInVc3LinkToThis attribute indicates the slot of the ML card to which
the VC card is mapped.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.14.2.1.7 |
prtVcPbxCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.15 |
prtExVcPbxCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExVcPbxCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.15.1 |
prtExVcPbxCnfgEntry PrtExVcPbxCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.15.1.1 |
prtExVcPbxCnfgIdxThis object indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.1.1.1 |
prtExVcPbxSltIdxThis object indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.2 |
prtExVcPbxPrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.3 |
prtExVcPbxConnectThis object indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.4 |
prtExVcPbxGroupThe group object links together several VC-PBX cards,
concerning compression of the same input T1/E1 link
time-slots.
When ports of different slots have the same group, they are
linked.
When ports have a different group, they are not linked.
For VC-PBX/T1 and E1 cards, this object is - their own
IO Slot.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.5 |
prtExVcPbxTransparentThis object indicates whether the Transparent transfer
of Time-Slots is required or not.
Time-Slots transferred by Transparent, will not be
compressed.
no - applicable only for VC-PBX/T1 and VC-PBX/E1 cards
yes - applicable only for VC-PBX/T1 and VC-PBX/E1 cards
notApplicable - only for VC-PBX cards.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.6 |
prtExVcPbxTransSignalTsThis object specifies the ML Time-Slot dedicated to
the signaling of the PABX Transparent TSs.
None = 255.
When prtExVcPbxTransparent=no this object's value=None (255)
When prtExVcPbxTransparent=notApplicable, this object's
value=None (255).
When prtExVcPbxTransparent=yes:
- for VC-PBX/T1 ports, this object's valid values are 1..16
or None (255).
- for VC-PBX/E1 ports, this object's value will be 16 or None
(255).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.1.1.7 |
prtExVcPbxFrameThis object is the frame parameter for T1/E1 interface.
The user should select only the parameters which are relevant
to the specific card:
T1 values for the VC-PBX/T1 card.
E1 values for the VC-PBX/E1 card.
notApplicable - for the VC-PBX card.
This parameter has the same values as dsx1LineType in T1/E1
MIB (RFC-1406). The parameters in dsx1LineType are:
other (1)
esfT1 dsx1ESF (2)
sfT1 dsx1D4 (3)
g732nE1 dsx1E1 (4)
g732nE1CRC dsx1E1-CRC (5)
g732sE1 dsx1E1-MF (6)
g732sE1CRC dsx1E1-MF-CRC (7)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.8 |
prtExVcPbxRestoreTimeThe time passing from the disappearance of the loss of
synchronization condition (red alarm) to the restoration of
normal service. The options 1secFast(2) and 10sec62411(3)
for E1 interfaces are proprietary implementation of the T1
standard to the E1 interface.
ccittE1 - is applicable only for VC-PBX/E1 card
notApplicable - is applicable for VC-PBX cardrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.9 |
prtExVcPbxLineCodeThis object is the line code parameter used for T1/E1
interface.
The user should select only the parameters which are relevant
to the specific card:
T1 line code parameters for VC-PBX/T1
E1 line code parameters for VC-PBX/E1
notApplicable - for VC-PBX
This parameter has the same values as dsx1LineCoding in T1/E1
MIB (RFC-1406). The parameters in dsx1LineCoding are:
dsx1JBZS (1)
dsx1B8ZS (2)
dsx1HDB3 (3)
dsx1ZBTSI (4)
dsx1AMI (5)
other (6)rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.10 |
prtExVcPbxLineLengthThis object is the line length parameter.
It is applicable only for the VC-PBX/T1 card.
notApplicable - for the VC-PBX and VC-PBX/E1 card.
lenXXXpXXXft = len-XXX-XXXft.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.11 |
prtExVcPbxLinkToThis object indicates the slot of the ML card to which
the VC-PBX/T1, VC-PBX/E1 card Transparent TSs are mapped.
notApplicable - for VC-PBX card AND
for VC-PBX/T1, VC-PBX/E1 cards, when prtExVcPbxTransparent=no .
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.12 |
prtExVcPbxSignalOperThis object indicates the Signaling Operation of the
VC-PBX/T1, VC-PBX/E1 external port.
notApplicable - for VC-PBX card
normal - all 4 signaling bits are transferred.
bEqA - copy the A bit into the B bit. Applicable only for
VC-PBX/T1.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.13 |
prtExVcPbxIdleCodeDetermines the code for transmission in empty time slots.
notApplicable - for VC-PBX card .rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.1.1.14 |
prtIn1p6VcPbxCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtIn1p6VcPbxCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.15.2 |
prtIn1p6VcPbxCnfgEntry PrtIn1p6VcPbxCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.15.2.1 |
prtIn1p6VcPbxCnfgIdxThis object indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.2.1.1 |
prtIn1p6VcPbxSltIdxThis object indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.2.1.2 |
prtIn1p6VcPbxPrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.2.1.3 |
prtIn1p6VcPbxConnectThis object indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.2.1.4 |
prtIn1p6VcPbxRateThis object indicates the port Rate.
For Normal mode (prtIn7p8VcPbxMode=normal), only part of the values
are valid (constant rate).
For Server mode (prtIn7p8VcPbxMode=server), all values are
applicable (user can select the desired compression rate).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.2.1.5 |
prtIn1p6VcPbxEchoCancelerEcho canceler activation.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.2.1.6 |
prtIn1p6VcPbxPabxTsThis object defines the PABX Time-Slot assigned to this
internal port.
For a T1 link, the valid values are: 1 .. 24.
For an E1 link, the valid values are: 1 .. 31.
This object is NOT applicable when prtIn1p6VcPbxConnect=no.
This object is applicable for all cards of VC-PBX family.
Default=the internal port index (1..6).ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.2.1.7 |
prtIn7p8VcPbxCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtIn7p8VcPbxCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.15.3 |
prtIn7p8VcPbxCnfgEntry PrtIn7p8VcPbxCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.15.3.1 |
prtIn7p8VcPbxCnfgIdxThis object indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfgro INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.3.1.1 |
prtIn7p8VcPbxSltIdxThis object indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.2 |
prtIn7p8VcPbxPrtIdxA unique identifier of the port, within the card.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.3 |
prtIn7p8VcPbxConnectThis object indicates whether the port should be
considered in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.4 |
prtIn7p8VcPbxModeThis object indicates the working mode of the port:
- normal - the compressed voice will be sent to an MTML
card inside the Mux.
- server - the compressed voice will be sent to the Digital
Voice connector, as a service to an outside user.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.5 |
prtIn7p8VcPbxRateThis object indicates the port Main Rate.
For Server mode (prtIn7p8VcPbxMode=server), the value will
be notApplicable.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.6 |
prtIn7p8VcPbxSignalModeThis object indicates the Signal Mode.
For Server mode (prtIn7p8VcPbxMode=server), the only valid
values are:
- none
- aBitrw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.7 |
prtIn7p8VcPbxOosOut of service Signaling mode.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.8 |
prtIn7p8VcPbxLinkToThis object indicates the slot of the ML card to which
the VC card is mapped.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.
For Server mode (prtIn7p8VcPbxMode=server), this object is
not applicable.
Both ports, 7 and 8 should be linked to the same Slot.
STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot
and prtGenCnfgLinkToPort.rwdeprecated Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.3.1.9 |
prtExVcPbxTsTableThe write operation into the table objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtExVcPbxTsEntry .1.3.6.1.4.1.164.3.2.3.2.15.4 |
prtExVcPbxTsEntry PrtExVcPbxTsEntry .1.3.6.1.4.1.164.3.2.3.2.15.4.1 |
prtExVcPbxTsCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.4.1.1 |
prtExVcPbxTsSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not validro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.4.1.2 |
prtExVcPbxTsPrtIdxThis attribute indicates a unique port number.
VCPBX/E1 and VCPBX/T1 cards have only one external interface.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.4.1.3 |
prtExVcPbxTsIdxThis attribute indicates a unique PABX time slot position.
The valid time slots are 1..24 for VC-PBX/T1 and
1..31 for VC-PBX/E1.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.15.4.1.4 |
prtExVcPbxTsModeThis attribute indicates the usage, process and way of the
specific PABX TS towards its destination:
unused - the TS is not used (no processing, no destination).
compressed - the TS is used, sent for compression to an
internal port 1..6 of either the same card or a
VC-PBX card of the same group.
transparent - the TS is used, no processing, it is sent
directly to the ML card the VC-PBX/T1,(E1) is
linked to.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.4.1.5 |
prtExVcPbxTsIConSlotThe object's io1..io12 values are applicable only when
prtExVcPbxTsMode=compressed. Otherwise, its value should be
noConnect.
This object indicates whether the specified compressed
time slot is connected/routed internally in the Agent and
to which card it is connected.
The valid selectable slots are either the current one,
(prtExVcPbxTsSltIdx), or a slot containing a VC-PBX card.
In the ?004 Unit the entries io6(10)..io12(16) are not valid.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.4.1.6 |
prtExVcPbxTsIConPrtThis attribute indicates the internal VC-PBX port to which
this PABX TS is connected for compression.
noConnect - when prtExVcPbxTsIConSlot=noConnect.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.15.4.1.7 |
prtIsdnCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.16 |
prtIsdnCnfgTableThe write operation into the table objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtIsdnCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.16.1 |
prtIsdnCnfgEntry PrtIsdnCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.16.1.1 |
prtIsdnCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.1.1.1 |
prtIsdnSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In the ?004 Unit the entries io6(10)..io12(16) are not valid
For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB'ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.2 |
prtIsdnPrtIdxThis attribute indicates a unique port number.
For MAXcess the values will be:
exPrt1(1),
exPrt2(2),
exPrt3(3),
exPrt4(4),
For KM-2100 the port index is calculated as follows:
100*Slot+Chro INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.1.1.3 |
prtIsdnConnectThis attribute indicates if the port is connected.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.4 |
prtIsdnSignalingProtocolThis attribute fixes which signaling protocol
is used at this port (D-Channel).
It is equivalent to isdnSignalingProtocol
in the isdn MIB.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.5 |
prtIsdnBasicRateLineTopologyThis attribute is relevant for ISDN BRI only.
It is equivalent to isdnBasicRateLineTopology
in the isdn MIB.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.6 |
prtIsdnModeThis attribute allows the user to configure the port as
leased(2) in case of connection to a TDM network.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.7 |
prtIsdnFilterThis attribute allows the user to configure the port:
answerAll(2): accept all incoming calls,
rejectAll(3): reject all incoming calls,
selective(4): accept or reject according directory table.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.8 |
prtIsdnSimultaneousCallIn case of simultaneous call (local,remote and remote,local):
accept(2): accept the incoming call,
reject(3): reject the incoming call.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.9 |
prtIsdnNumOfAbstractTermAn object for KM2100/4 agents.
255=Not Applicable
When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable)
else If ML speed is 64Kbps value should be 1.
If ML speed is 128Kbps value can be either 1 or 2 (user selection).rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.1.1.10 |
prtIsdnSwitchModeFor KM2100.
auto - The call is initiated automatically by one of the IO cards connected
to KML.10(ISDN card) having ISDN Switch Mode.
manual - The call is initiated by the user manually, for KML.10
having ISDN Switch Mode (via mdlSCmd).
connect- The call is initiated 'immediately', for KML.10 having ISDN Switch Mode.
'immediately'- means: immediately after power-up (when product performed
Reset) OR, since this value appears in the active
configuration.
In this case, the call can be disconnected only by power-off of the
product or by changing this object to another value (or actual Remove
of the KML.10 relevant card).
notApplicable - For other card types.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.1.1.11 |
prtIsdnEndpointTableThe write operation into the table objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtIsdnEndpointEntry .1.3.6.1.4.1.164.3.2.3.2.16.2 |
prtIsdnEndpointEntry PrtIsdnEndpointEntry .1.3.6.1.4.1.164.3.2.3.2.16.2.1 |
prtIsdnEndpointCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.2.1.1 |
prtIsdnEndpointSltIdxThis attribute indicates a unique slot position where
the card is inserted.
In ?004 Unit the entries io6(10)..io12(16) are not valid
For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB'ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.2.1.2 |
prtIsdnEndpointPrtIdxThis attribute indicates a unique port number.
For MAXcess the values will be:
exPrt1(1),
exPrt2(2),
exPrt3(3),
exPrt4(4),
For KM-2100 the port index is calculated as follows:
100*Slot+Chro INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.2.1.3 |
prtIsdnEndpointIdxSince more than one endpoint may be defined per
isdn entity, this field is a simple index.
It corresponds to isdnEndpointIdx in the isdn MIB.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.2.1.4 |
prtIsdnEndpointTeiTypeThe type of TEI (Terminal Endpoint Identifier)
used for this Terminal Endpoint. In case of dynamic(1),
the TEI value is selected by the switch. In
case of static(2), a valid TEI value has to be
entered in the isdnEndpointTeiValue object.
interface type as well as the Terminal Endpoint type.
static(2). On Basic Rate interfaces the default value
is dynamic(1) for isdn(63) Terminal Endpoints.
It corresponds to isdnEndpointTeiType in the isdn MIB.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.2.1.5 |
prtIsdnEndpointTeiValueWhen the TEI Type is static, the value of the TEI should be
between 0 and 63. Else, it is not selectable by user.
255 = notApplicable.
It corresponds to isdnEndpointTeiValue in the isdn MIBrw INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.2.1.6 |
prtIsdnEndpointSpidThe Service profile IDentifier (SPID) information
for this Terminal Endpoint. It is is composed of
9-20 numeric characters.
It corresponds to isdnEndpointSpid in the isdn MIB.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.3.2.3.2.16.2.1.7 |
prtIsdnEndpointBearerChThis is the selected dialing channel.
anyChannel - the system selects the dialing channel.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.2.1.8 |
prtIsdnEndpointRowStatusThis field indicates whether to consider this endpoint
or not.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.2.1.9 |
prtIsdnDirectoryTableThe write operation into the table objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtIsdnDirectoryEntry .1.3.6.1.4.1.164.3.2.3.2.16.3 |
prtIsdnDirectoryEntry PrtIsdnDirectoryEntry .1.3.6.1.4.1.164.3.2.3.2.16.3.1 |
prtIsdnDirectoryCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.3.1.1 |
prtIsdnDirectorySltIdxThis attribute indicates a unique slot position where
the card is inserted.
For MX300/30 ports:
io1(5) = isdn1(5) and io2(6) = isdn2(6).
In ?004 Unit the entries io6(10)..io12(16) are not valid
For KM2100/4 Valid entries are 'kmxMlA ' or 'kmxMlB'ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.3.1.2 |
prtIsdnDirectoryPrtIdxFor MAXcess this is the internal port number: 101, 102,....
For KM-2100 the port index is calculated as follows:
100*Slot+Chro INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.3.1.3 |
prtIsdnDirectoryLocalAddrThis is the local address associated with this
entry.
- For MX: Size=17 , Default=0 (17 characters)
- For KM: Size=20, Default=blank (20 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.4 |
prtIsdnDirectoryLocalSubAddrThis is the local subaddress associated with this
entry.
- For MX: Size=6 , Default=0 (6 characters)
- For KM: Size=4 , Default=blank (4 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.5 |
prtIsdnDirectoryRemoteAddrThis is the remote address associated with this
entry.
- For MX: Size=17 , Default=0 (17 characters)
- For KM: Size=20, Default=blank (20 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.6 |
prtIsdnDirectoryRemoteSubAddrThis is the remote subaddress associated with this
entry.
- For MX: Size=6 , Default=0 (6 characters)
- For KM: Size=4 , Default=blank (4 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.7 |
prtIsdnDirectoryPrtNuThis is the external port number connected to
this entry.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.3.1.8 |
prtIsdnDirectoryTeiIdThis is the abstract terminal id if relevant,
connected to this entry.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.16.3.1.9 |
prtIsdnDirectoryRowStatusThis is the status for the row. It allows to know
whether to consider this row or not.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.16.3.1.10 |
prtIsdnDirectoryLocalAddr2This is the second local address associated with this
entry.
- For MX: Size=17 , Default=0 (17 characters)
- For KM: Size=20, Default=blank (20 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.11 |
prtIsdnDirectoryLocalSubAddr2This is the second local subaddress associated with this
entry.
- For MX: Size=6 , Default=0 (6 characters)
- For KM: Size=4 , Default=blank (4 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.12 |
prtIsdnDirectoryRemoteAddr2This is the second remote address associated with this
entry.
- For MX: Size=17 , Default=0 (17 characters)
- For KM: Size=20, Default=blank(20 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.13 |
prtIsdnDirectoryRemoteSubAddr2This is the second remote subaddress associated with this
entry.
- For MX: Size=6 , Default=0 (6 characters)
- For KM: Size=4 , Default=blank (4 characters)rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.16.3.1.14 |
prtLogicalCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.17 |
prtLogicalCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtLogicalCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.17.1 |
prtLogicalCnfgEntry PrtLogicalCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.17.1.1 |
prtLogicalCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.1.1.1 |
prtLogicalSltIdxSlot Index.
For ISDN BRI Ports of MX300/30,
io1(5) = isdn1(5) and io2(6) = isdn2(6).ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.1.1.2 |
prtLogicalPrtIdxThis attribute indicates a unique port number.
This port number should be an internal port number:
inPrt1(101)->inPrt50(150), linkSel1(200)->linkSel50(250),
encaps1(300)-> encaps50(350), huntGr1(101) -> huntGr10(110).ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.1.1.3 |
prtLogicalConnectThis attribute indicates whether the port should be considered
in any of the mux algorithms.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.1.1.4 |
prtLogicalFunctionThis parameter defines the function of the relevant channel.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.1.1.5 |
prtLogicalRowStatusThis parameter allows the NMS to create/delete
logical ports.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.1.1.6 |
linkSelectorCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF LinkSelectorCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.17.2 |
linkSelectorCnfgEntry LinkSelectorCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.17.2.1 |
linkSelectorCnfgIdxThis attribute indicates the Idx of
the Cnfg (1..100) being accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.2.1.1 |
linkSelectorSltIdxSlot Indexro Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.2.1.2 |
linkSelectorPrtIdxThis attribute indicates a unique port number.
This port number should be internal port number:
higher or equal to linkSeL1(201).ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.2.1.3 |
linkSelectorMaxIdleTimeMove to higher prioritized connected link
after this period of seconds of silence on the current link.
0=move immediately to higher prioritized connected link.
UNIT is seconds.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.2.1.4 |
linkSelectorModeIf the link selector is in mode:
backup(2)=then the link with the lower priority will be
used in case of failure of the higher priority link,
bod(3)=bandwidth on demand or dynamic bandwidth allocation
means that links with lower priority will be used
whenever additional bandwidth is required.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.2.1.5 |
linkSelectorRevertIf the link selector is in mode backup:
auto(2)=return automatically to Main link when it is OK.
manual(3)=stays connected to backup link.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.2.1.6 |
linkSelectorMinBUSessionMinimum duration of a backup session before
returning to Main Link. Relevant in Backup Mode and
when Revert is auto(2). Value 255 is for NEVER which
means never return to Main Link.
UNIT is minutes.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.2.1.7 |
linkSelectorPLinkTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF LinkSelectorPLinkEntry .1.3.6.1.4.1.164.3.2.3.2.17.3 |
linkSelectorPLinkEntry LinkSelectorPLinkEntry .1.3.6.1.4.1.164.3.2.3.2.17.3.1 |
pLinkCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.3.1.1 |
pLinkSltIdxSlot Indexro Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.3.1.2 |
pLinkPrtIdxThis attribute indicates a unique port number.
This port number should be the link selector number.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.3.1.3 |
pLinkIdxThis index is the row number.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.3.1.4 |
pLinkSlotNuThe slot of the prioritized link.
For ISDN BRI ports of MX300/30,
io1(5) = isdn1(5) and io2(6) = isdn2(6).rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.3.1.5 |
pLinkPortNuThe port of the prioritized link.
Value 100 is for noConnect.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.3.1.6 |
pLinkPrioNuThe priority of the prioritized link.
MIN=1...., MAX=8.rw INTEGER .1.3.6.1.4.1.164.3.2.3.2.17.3.1.7 |
pLinkVRateThe rate to use with this link.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.17.3.1.8 |
prtFrPlusCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.18 |
prtFrPlusCnfgTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry. SEQUENCE OF PrtFrPlusCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.18.1 |
prtFrPlusCnfgEntry PrtFrPlusCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.18.1.1 |
prtFrPlusCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.18.1.1.1 |
prtFrPlusSltIdxSlot Index.
For ISDN BRI Ports of MX300/30,
io1(5) = isdn1(5) and io2(6) = isdn2(6).ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.18.1.1.2 |
prtFrPlusPrtIdxThis attribute indicates a unique port number.
This port number should be:
- for ISDN cards: inPrt1(101)->inPrt50(150)
- for MHS1 card : exPrt1(1)
- for MHS3, MLS3 cards: exPrt1(1)->exPrt3(3)
- for MLS6 cards: exPrt1(1)->exPrt6(6).ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.18.1.1.3 |
prtFrPlusNotSegmentedPrioritiesThis parameter is relevant only for FR+ protocol and
asks the MXcess NOT to segment data with specified
priorities: from LSB:
bit 1 is for priority 1,
bit 2 is for priority 2, .... till bit 7 for priority 7.
- a priority selected to be segmented : its bit will be '0'
- a priority not to be segmented : its bit will be '1'
Default is 00000000; i.e, segment all priorities.rw OCTET STRING .1.3.6.1.4.1.164.3.2.3.2.18.1.1.4 |
prtMl4Cnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.19 |
prtMl4CnfgTableThis is an extension table for MTML-4 card parameters. SEQUENCE OF PrtMl4CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.19.1 |
prtMl4CnfgEntry PrtMl4CnfgEntry .1.3.6.1.4.1.164.3.2.3.2.19.1.1 |
prtMl4CnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. The write operation is valid only
to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.19.1.1.1 |
prtMl4SltIdxThis attribute indicates a unique slot position where
the module is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.19.1.1.2 |
prtMl4PrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.19.1.1.3 |
prtMl4SigProfileThis object indicates the Signaling Profile of the port.
none - when the Frame is G732N (no MF).
p1 = profile 1
p2 = profile 2
p3 = profile 3
p4 = profile 4
p5 = profile 5rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.19.1.1.4 |
prtMl4CGAThis object selects the method used to signal the CGA state
to the other end, through the main link.
'none' - non-transparent mode. When one of the links
(main) will be in Out Of Service state, both
'Data/Voice Oos' and 'Oos' will be
transmitted to the other end.
'trans' - when one of the links (main) will be in Out
Of Service state, 'Data/Voice Oos' will be
transmitted to the other end.
'full' - fully-transparent mode. When one of the links
(main) will be in Out Of Service state,
neither 'Data/Voice Oos' nor 'Oos' will
be transmitted to the other end.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.19.1.1.5 |
prtMl4Oos'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state
'forcedIdle' = SP = both A and B signaling bits are forced
to '0' during out-of-service periods.
'forcedBusy' = MK = both A and B signaling bits are forced
to '1' during out-of-service periods.
'busyIdle' = MK_SP = A and B bits are forced to '1' for
2.5 seconds; then they are switched to '0'
until out-of-service condition disappears.
'idleBusy' = SP_MK = A and B bits are forced to '0' for
2.5 seconds; then they are switched to '1'
until out-of-service condition disappears.
- for T1: '0'=0 ; '1'=1
- for E1: '0'=1 ; '1'=0rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.19.1.1.6 |
prtMl4VoiceOosVoice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0.rw OCTET STRING .1.3.6.1.4.1.164.3.2.3.2.19.1.1.7 |
prtMl4DataOosData Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0.rw OCTET STRING .1.3.6.1.4.1.164.3.2.3.2.19.1.1.8 |
prtMl4ServiceLink Service.
leasedLine - usual TDM interface.
v51 - V5.1 interface.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.19.1.1.9 |
prtAcmCnfg OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.2.3.2.20 |
prtAcmCnfgTableThis is a table for ACM port parameters. SEQUENCE OF PrtAcmCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.20.1 |
prtAcmCnfgEntry PrtAcmCnfgEntry .1.3.6.1.4.1.164.3.2.3.2.20.1.1 |
prtAcmCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg. The write operation is valid only
to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.2.3.2.20.1.1.1 |
prtAcmSltIdxThis attribute indicates a unique slot position where
the module is inserted.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.20.1.1.2 |
prtAcmPrtIdxThis attribute indicates a unique port number.ro Enumeration .1.3.6.1.4.1.164.3.2.3.2.20.1.1.3 |
prtAcmConnectThis attribute indicates whether the port should be
connected or not. Only a connected port can perform activity.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.20.1.1.4 |
prtAcmActiveStateThis attribute indicates the Electric Active State of the port.rw Enumeration .1.3.6.1.4.1.164.3.2.3.2.20.1.1.5 |
prtAcmAlrStringAlarm string selected by user for the Inbound ports.
This object is applicable only for the Inbound Ports: ext-5..ext-12.
For the Outbound Ports (ext-1..ext-4), the size of this string will be 0.rw DisplayString .1.3.6.1.4.1.164.3.2.3.2.20.1.1.6 |
dacsMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3 |
sanityCheckTrapThis trap is sent after a data base download attempt.
It returns the sanity result status and the configuration
no.checked. TRAP-TYPE .1.3.6.1.4.1.164.3.3.0.1 |
dacsMuxAlarmsTrapThis trap is sent when an alarm occurs. TRAP-TYPE .1.3.6.1.4.1.164.3.3.0.2 |
mdlConnectTrapThis trap is sent when a card is removed. TRAP-TYPE .1.3.6.1.4.1.164.3.3.0.3 |
sysAlrStatusTrapThis trap is sent upon any change in the value of any of
the variables. TRAP-TYPE .1.3.6.1.4.1.164.3.3.0.4 |
sysStatusChangedTrapThis trap is sent when Leds status is changed. TRAP-TYPE .1.3.6.1.4.1.164.3.3.0.5 |
cnfgUpdateTrapThis trap is sent upon change of the active Configuration DB. TRAP-TYPE .1.3.6.1.4.1.164.3.3.0.6 |
systemDacsMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1 |
sysSa OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.1 |
sysSaSwchStatusThis object indicates the status of the switches on
the SA unit.
Each switch is represented by a bit. The status is a sum
of 2**n, according to the bits.
For SMODs products see modem's specification.
For DXC product see the following:
There are 4 switches:
bit 0 SP-PAR (LSB) '1' - Default parameters
bit 1 PSWRD '1' - Password=default
'0' - Password=user selected
bit 2 DB-INIT '1' - DB initiated with default
'0' - DB initiated with NVRAM contents
bit 3 PC-SP (MSB) '1' - Management by terminal only
'0' - Management by NMS
Example: If SP-PAR and PSWRD bits are set ('1'), the value
will be 3 (2**1 + 2**0).
When the status of the switches is unknown, the value of
this object will be 255.ro INTEGER .1.3.6.1.4.1.164.3.3.1.1.1 |
sysSaSwRevisionThis object indicates the Software revision of the
system.ro DisplayString .1.3.6.1.4.1.164.3.3.1.1.2 |
sysSaHwVersionThis object indicates the Hardware version of the
system.ro DisplayString .1.3.6.1.4.1.164.3.3.1.1.3 |
sysSaPortsThis object indicates the ports that are present in the
system.
Each possible port is represented by a bit.
The value of this object is a sum of 2**n, n=number of bits.
'1' - means that the port exists
'0' - means that the port does not exist
For detailed bit assignment, see product's spec.
Bit 0 = LSB
When this object is not relevant, the value will be 0.
In some cases, this object may represent ports configuration
of the system AND its far-end unit.ro INTEGER .1.3.6.1.4.1.164.3.3.1.1.4 |
sysSaReadSwchThis object indicates wether the configuration will be read from the DIP switches
on the SA (stand alone) unit.
Each switch is represented by a bit.
If the bit is 1: the configuration will be read from the HW switch position.
If the bit is 0: the configuration will be read from the SW user configuration.
The DIP switches are different in each of the RAD devices.
In the Tiny Router (starting from the LSB) the following switches exist:
Bit 0: WAN Loop
Bit 1: LAN Full Duplex (When LAN AUI connector, it is SQE)
Bit 2: PPP (When WAN 4 Wire connector, it is LONG)
Bit 3: IP Learnrw INTEGER .1.3.6.1.4.1.164.3.3.1.1.5 |
sysHub OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.2 |
sysChas OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.2.1 |
chassTotalNoOfSltThis object indicates the number of physical slots in
the Hub chassis.ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.1.1 |
chassTotalNoOfIoSltThis object indicates the total number of physical IO slots
in the chassis, (not all slots must be occupied and active).ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.1.2 |
chassTotalNoOfPsSltThis object indicates the number of physical Power Supply
slots in the chassis.ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.1.3 |
chassTotalNoOfClSltThis object indicates the number of physical Common Logic
slots in the chassis.ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.1.4 |
chassTotalNoOfMlSltThis object indicates the number of physical Main Link
slots in the chassis (Kmux).ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.1.5 |
sysDcl OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.2.2 |
sysDclTableAll the entries of this table are identical (have the
same value) for all the configurations (1..255) except
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry. SEQUENCE OF SysDclEntry .1.3.6.1.4.1.164.3.3.1.2.2.1 |
sysDclEntry SysDclEntry .1.3.6.1.4.1.164.3.3.1.2.2.1.1 |
sysDclCnfgIdxThis object indicates the Idx of the Cnfg(1..255)
being accessed ; Idx of 255 relates to the TmpCnfg.
This object is identical for all the configurations (1..255).
Only the TmpCnf(255) might have a different value.ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.2.1.1.1 |
sysDclRedundancyDCL redundancy desired state.rw Enumeration .1.3.6.1.4.1.164.3.3.1.2.2.1.1.2 |
sysDclActiveClActive desired DCL.
When 'auto' is selected, the system automatically selects
the active DCL.rw Enumeration .1.3.6.1.4.1.164.3.3.1.2.2.1.1.3 |
sysDclFlipDelayIf one DCL flip occured and a second one should be
performed, the time from the previous flip is checked.
If the time is shorter than the delay specified here
(in minutes), the system should delay the flip operation
until time reaches the specified delay.rw Enumeration .1.3.6.1.4.1.164.3.3.1.2.2.1.1.4 |
sysDclOnlineThe active Dcl card of the agent.ro Enumeration .1.3.6.1.4.1.164.3.3.1.2.2.2 |
sysDclCopyDbTableThis table enables to copy a cofiguration from the Offline
Dcl to the Online Dcl. SEQUENCE OF SysDclCopyDbEntry .1.3.6.1.4.1.164.3.3.1.2.2.3 |
sysDclCopyDbEntry SysDclCopyDbEntry .1.3.6.1.4.1.164.3.3.1.2.2.3.1 |
sysDclCopyDbIdxThis object indicates the Idx of the Cnfg(1..255)
being accessed.ro INTEGER .1.3.6.1.4.1.164.3.3.1.2.2.3.1.1 |
sysDclCopyDbCmdWhen this command is sent to the agent, on(3), the Database
specified (Db Idx), will be copied from the Offline Dcl
to the Online Dcl. Afterwards the value of this object will
automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.1.2.2.3.1.2 |
sysStatus OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.3 |
sysSDateFormatThis object indicates the date and time format used for the
sysSDateAndTimeCmd and for the alarm buffer report.
KM-2100 V1 and FCD-T1/E1 do not support the 'yyyyMMDD' format.rw Enumeration .1.3.6.1.4.1.164.3.3.1.3.1 |
sysSDateCmdThis object indicates the current date as it is known by the
agent using its own real-time clock. The format would be as
specified by the sysSDateFormat.
This parameter can be set for time synchronization between
the NMS and the Agent.
* For KM-2100 V1 and FCD-T1/E1 - the string should contain
'/' signs between day, month and year. Example: 12/08/1998.
* For DXC and rest of the products - the string should contain
'-' signs between day, month and year. Example: 12-08-1998.
The day value will be in the range: 1..31.
The month value will be in the range: 1..12.
The year value will be in the range: 1996..2050 for products
supporting the '-' format.rw DisplayString .1.3.6.1.4.1.164.3.3.1.3.2 |
sysSTimeCmdThis object indicates the current time as it is known by the
agent using its own real-time clock.
This parameter can be set for time synchronization between
the NMS and the Agent.
The string should contain ':' signs between hour, minute
and second. Example: 11:05:58.rw DisplayString .1.3.6.1.4.1.164.3.3.1.3.3 |
sysSActiveCnfgThis object specifies the configuration number,
that is currently active and running.ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.4 |
sysSEditCnfgThis object indicates the unique configuration number that
is currently loaded into the tmp working space for
manipulation and update operations. Value of 255 means no
config. is under editing process.ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.5 |
sysSEditByThis entry indicates which MMI application is working on
the edited config.
The editing phase starts at the first modify operation and
ends after a load operation.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.6 |
sysSClkSrcThis entry indicates the source of the system clock.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.7 |
sysSAlrStatusIndicates the current alarm state only for system level.
This object will be set to:
- major (3): when there is at least one active (ON) major
alarm .
- minor (4): when there is no active major alarm, but
there is at least one active minor alarm.
- off(2): when there is no active (ON) major or minor alarms
(since last clear operation).ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.8 |
sysSAlrStatusAllIndicates the current alarm state including all levels:
system, card, port.
This object will be set to:
- major (3): when there is at least one active (ON) major
alarm .
- minor (4): when there is no active major alarm, but
there is at least one active minor alarm.
- off(2): when there is no active (ON) major or minor alarms
(since last clear operation).ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.9 |
sysSTestStatusIndicates the current test status (for all levels: system,
card, port).
This attribute will be set to:
- on(3): when there is at least one test in progress on the
system/card/port
otherwise the value will be off(2).ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.10 |
sysSSanityCheckStatusUpon completion of the Sanity Check process on the TmpCnfg
this object will be set to:
- fail(2): when there is at least one error (which is
not just a warning) encountered
otherwise,
- warning(3): when there are only warnings
otherwise,
- ok(4).
The value should be unknown(1), if the TmpCnfg was changed
after the last Sanity check.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.11 |
sysSNoOfSanityCheckErrThis object indicates the number of errors/warnings
discovered by the last Sanity Check process.ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.12 |
sysSErrListTable SEQUENCE OF SysSErrListEntry .1.3.6.1.4.1.164.3.3.1.3.13 |
sysSErrListEntry SysSErrListEntry .1.3.6.1.4.1.164.3.3.1.3.13.1 |
sysSErrTypeThe errors are recorded in the agent, in two separate lists,
according to their type: error or warning.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.13.1.1 |
sysSErrIdxUnique index number to identify an entry in the error
or warning list .
The maximum value cannot exceed the value of
'sysSNoOfSanityCheckErr' (actually, the sum of the Errors
list max. index and the Warning list max. index should
equal the value of'sysSNoOfSanityCheckErr').ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.13.1.2 |
sysSErrDescriptionThis object is a full text description of the sanity check
error including error code, IO slot and port numbers related to
the code .ro DisplayString .1.3.6.1.4.1.164.3.3.1.3.13.1.3 |
sysSMaxNoOfCnfgMaximum number of configurations that can be defined and
stored in the DACS agent.
If the DACS agent has a large capacity, the maximum will be
limited to 254.ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.14 |
sysSSelfTestResultThe test is performed by the active Common Logic card.
The result will be a sum of 2**n according to the following
bit convention:
For DXC:
bit 0 Database 1 Checksum Error (LSB)
bit 1 Database 2 Checksum Error
bit 2 I/O Expander Error
bit 3 Counter Error
bit 4 Matrix DPR Error
bit 5 PS-A 5 Volt Error
bit 6 PS-A 12 Volt Error
bit 7 PS-B 5 Volt Error
bit 8 PS-B 12 Volt Error
bit 9 EPROM Failure
For FCD:
bit 0 I/O Expander Error (LSB)
bit 1 Counter Error
bit 2 EPROM Failure
bit 3 Illegal Sys Config
bit 4 SFIFO
bit 5 EPIC Failure (ISDN)
When a bit is ('1'), the error exists.
When NO ERROR is encountered, this object's value will be 0.ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.15 |
sysSRelayStateIndicates the current state of the alarm relay.
notApplicable - for agents that do not support this object.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.16 |
sysSInvertedAlrIndicates if there is any Inverted alarm at any level of the
system (sys, card, port).
notApplicable - for agents that do not support this object.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.17 |
sysSRdnFlipTableThis table includes all the Flip events due to I/O Redundancy since
last Clear command of this table. SEQUENCE OF SysSRdnFlipEntry .1.3.6.1.4.1.164.3.3.1.3.18 |
sysSRdnFlipEntry SysSRdnFlipEntry .1.3.6.1.4.1.164.3.3.1.3.18.1 |
sysSRdnFlipIdxUnique index number to identify an entry in the Redundancy Flip list.ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.18.1.1 |
sysSRdnFlipSlotThe slot number from which Flip was performed.ro Enumeration .1.3.6.1.4.1.164.3.3.1.3.18.1.2 |
sysSRdnFlipPortThe port number from which Flip was performed.
For DXC:
For external ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
For internal ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
For MP:
For external ports, the value will be as that of the port in the
card. Example: external-3 -> 3
external-4 -> 4
For internal ports, the value will be 100 + the port in the
card. Example: internal-1 -> 101
internal-4 -> 104
100=notApplicable (when Redundancy is at card level).ro INTEGER .1.3.6.1.4.1.164.3.3.1.3.18.1.3 |
sysSRdnFlipCauseThe last cause that caused the Flip from the Slot (Port)
of sysSRdnSlot, sysSRdnPort.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.3.3.1.3.18.1.4 |
sysSRdnFlipDateFlip event Date. The format will be the one selected by user for
sysSDateFormat.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.3.3.1.3.18.1.5 |
sysSRdnFlipTimeFlip event Time. The format will be hh:mm:ss.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.3.3.1.3.18.1.6 |
sysSRdnFlipTableClearCmdThis command, when Set to 'on', clears the Redundancy Flip
table (sysSRdnFlipTable).
After clear is performed, the agent will turn the value to 'off'
automatically.rw Enumeration .1.3.6.1.4.1.164.3.3.1.3.19 |
sysSRdnFlipCmdThis object enables the user to send a command to the Agent, to Flip
from a current Online IO card to its Redundant card.
The value sent will be an Object Identifier of an entry in the sysCRdnTable.
This entry defines the Redundant couple of Slots on which the Flip
is applied.
Setting this object, will cause the Agent to Flip from current Online
card to its Redundant card.
This manual flip command is applicable only for entries having
Redundancy Mode=Y Cable.
Agent will send the value 0 for Get.rw OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.3.20 |
sysCurrentAlr OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.4 |
sysSAlrTableList of system level current existing alarms . SEQUENCE OF SysSAlrEntry .1.3.6.1.4.1.164.3.3.1.4.1 |
sysSAlrEntry SysSAlrEntry .1.3.6.1.4.1.164.3.3.1.4.1.1 |
sysSAlrIdxAn index number of the current system alarms.ro INTEGER .1.3.6.1.4.1.164.3.3.1.4.1.1.1 |
sysSAlrCodeThis object indicates a code related to a specific
alarm description. The list of codes and their related
descriptions will be sent to NMS request (for display purpose)
by alrGenTable.ro INTEGER .1.3.6.1.4.1.164.3.3.1.4.1.1.2 |
sysSAlrStateThis object indicates the alarm state.ro Enumeration .1.3.6.1.4.1.164.3.3.1.4.1.1.3 |
sysSAlarmMaskAlarm Mask is : on/off.ro Enumeration .1.3.6.1.4.1.164.3.3.1.4.1.1.4 |
sysSAlarmInvertAlarm Invert is : on/off.ro Enumeration .1.3.6.1.4.1.164.3.3.1.4.1.1.5 |
sysSAlrClearCmdSetting this attribute to ON, will enforce a clear
operation on the system level alarms . Upon completion,
the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.1.4.2 |
sysSAlrClearAllCmdSetting this attribute to ON, will enforce a clear
operation on all levels alarms . Upon completion,
the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.1.4.3 |
sysSAlrMaskAllon(3) - will cause masking of all the system level alarms.
These alarms will not be sent to NMS and will not
be taken into account for Alarms Status.
off(2) - will unmask all system level alarms except those
masked via the sysSAlrMask.rw Enumeration .1.3.6.1.4.1.164.3.3.1.4.4 |
sysSAlrMaskThis object is a mask that indicates which system level
alarms are masked. The masked alarms (their bit is set to
'1') are neither sent to the manager, nor taken into account
for alarm status and LEDs.
Bit no. = Alarm code
The bits that do not belong to the system level will be 0.
This object is applicable only when sysSAlrMaskAll=off
(otherwise all system alarms are masked).
Example: When Alarms having the codes 6 and 11 are masked,
the value of this object will be 840 (hex).rw OCTET STRING .1.3.6.1.4.1.164.3.3.1.4.5 |
sysSAlrDataUpdateCmdon(3) - will cause Update of the Alarms Severity, Attributes and Report
tables.
off(2) - Upon completion, the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.1.4.6 |
sysBufferAlr OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.5 |
sysBufferAlrTableList of current existing alarms (of all levels). SEQUENCE OF SysBufferAlrEntry .1.3.6.1.4.1.164.3.3.1.5.1 |
sysBufferAlrEntry SysBufferAlrEntry .1.3.6.1.4.1.164.3.3.1.5.1.1 |
sysBufferAlrIdxAn index number of the current alarms.ro INTEGER .1.3.6.1.4.1.164.3.3.1.5.1.1.1 |
sysBufferAlrCodeThis object indicates a code related to a specific
alarm description. The list of codes and thir related
descriptions will be known by the NMS (for display purpose)
and will appear in the unit's user manual.ro INTEGER .1.3.6.1.4.1.164.3.3.1.5.1.1.2 |
sysBufferAlrStateThis object indicates the alarm type.
minor/major - indicates appearance of the problem
and the type.
event - indicates occurence of an event.
off - indicates disappearance of a minor/major type
alarm.ro Enumeration .1.3.6.1.4.1.164.3.3.1.5.1.1.3 |
sysBufferAlrSlotThe slot number this alarm refers to.
When the alarm refers to a system function OR the DACS agent
is a stand-alone unit, the value will be 'notApplicable(255)'.ro Enumeration .1.3.6.1.4.1.164.3.3.1.5.1.1.4 |
sysBufferAlrPortThe port number this alarm refers to.
If the port number is irrelevant to this alarm (if it is
a system/card level alarm) the value will be 9999.ro INTEGER .1.3.6.1.4.1.164.3.3.1.5.1.1.5 |
sysBufferAlrDateThe date when the alarm occured. The format will be according
to sysSDateFormat.ro DisplayString .1.3.6.1.4.1.164.3.3.1.5.1.1.6 |
sysBufferAlrTimeThe time when the alarm occured.ro DisplayString .1.3.6.1.4.1.164.3.3.1.5.1.1.7 |
sysBufferAlrClearCmdSetting this attribute to ON, will enforce a clear
operation on the Alarms Buffer. Upon completion,
the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.1.5.2 |
sysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.6 |
sysCClkSrcTableAll the entries of this table are identical (have the
same value) for all the configurations (1..255) except
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry. SEQUENCE OF SysCClkSrcEntry .1.3.6.1.4.1.164.3.3.1.6.1 |
sysCClkSrcEntry SysCClkSrcEntry .1.3.6.1.4.1.164.3.3.1.6.1.1 |
sysCClkCnfgIdxThis attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.1.6.1.1.1 |
sysCClkSrcIdxAn index in the table. There are only two entries in the
table.
master - refers Master clock parameters
fallback - refers Fallback clock parametersro Enumeration .1.3.6.1.4.1.164.3.3.1.6.1.1.2 |
sysCClkSrcModeThis entry indicates the source the nodal timing is
locked to.
none - is an invalid option for Master clock.
internal - is an invalid option for Fallback clock .
station - is an invalid option for a stand-alone unit.
lbt - loop-back timing
notApplicable - for ML source of Kmux or ML Timing
combinations when Master/Fallback clock are
not applicable.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.1.1.3 |
sysCClkSrcPrtThis entry is valid only when working in rxClk mode.
For invalid entry the return value will be 9999.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The SP ports will be numbered as follows:
- SP port 1 : 1
- SP port 2 : 2
For external ports the convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
For internal ports the convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
For Kmux, the port will be according to : Slot*100+Ch.rw INTEGER .1.3.6.1.4.1.164.3.3.1.6.1.1.4 |
sysCClkStationFreqThis entry indicates the frequency of the station clock
when the source is 'station'.
The value will be applicable only when the sysCClkSrcMode is
'station'.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.1.1.5 |
sysCnfgTableAll the entries of this table are identical (have the
same value) for all the configurations (1..255) except
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry. SEQUENCE OF SysCnfgEntry .1.3.6.1.4.1.164.3.3.1.6.2 |
sysCnfgEntry SysCnfgEntry .1.3.6.1.4.1.164.3.3.1.6.2.1 |
sysCnfgIdxThis attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.1.6.2.1.1 |
sysCMatrixModeIndicates the TS Matrix Mode:
bidirectional - TS Assignment Matrix is symmetric.
unidirectional - TS Assignment Matrix can be asymmetric.
notApplicable - for agents that do not support this feature.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.2.1.2 |
sysCIsdnFormatISDN format. This parameter controls the operation mode of
the ISDN ports.
te - ISDN timing is derived from the signal received
from the equipment it is connected to.
nt - timing of the transmit path is locked to the nodal
timing source.
notApplicable - for agents that do not support this feature.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.2.1.3 |
sysCRoutingOnEthMng Routing Protocol on the online CL Ethernet port.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.2.1.4 |
sysCRdnTableConfiguration of all Redundant I/O cards and ports.
The write operation into the table objects is valid only
for the TmpCnfg.
A Slot/Port that have no Redundancy, will not exist in this
table. SEQUENCE OF SysCRdnEntry .1.3.6.1.4.1.164.3.3.1.6.3 |
sysCRdnEntry SysCRdnEntry .1.3.6.1.4.1.164.3.3.1.6.3.1 |
sysCRdnCnfgIdxThis object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.1.6.3.1.1 |
sysCRdnPrimeSlotThe slot number of the Primary card of Redundancy.
The Primary card should be the card that user wishes to be
the online card (usually the more important one).
For some Redundancy modes the importance of the redundant
cards/ports is the same.ro Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.2 |
sysCRdnPrimePortThe port number.
For DXC:
For external ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
For internal ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
For MP:
For external ports, the value will be as that of the port in the
card. Example: external-3 -> 3
external-4 -> 4
For internal ports, the value will be 100 + the port in the
card. Example: internal-1 -> 101
internal-4 -> 104
100=notApplicable (when Redundancy is at card level).ro INTEGER .1.3.6.1.4.1.164.3.3.1.6.3.1.3 |
sysCRdnSecSlotThe slot number of the Secondary card of Redundancy matching
the Primary slot.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.4 |
sysCRdnSecPortThe port number.
For DXC:
For external ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
For internal ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
For MP:
For external ports, the value will be as that of the port in the
card. Example: external-3 -> 3
external-4 -> 4
For internal ports, the value will be 100 + the port in the
card. Example: internal-1 -> 101
internal-4 -> 104
100=notApplicable (when Redundancy is at card level).rw INTEGER .1.3.6.1.4.1.164.3.3.1.6.3.1.5 |
sysCRdnModeRedundancy Mode.
DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4)
MP supports: dualCableAIS(2), yCable(3), dualCableParallelTx(4) and
backup(5).
backup - will be used when a port is backup of more than one port.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.6 |
sysCRdnRecModeRecovery Mode. This object determines if after recovery
of the failed card/port it will become on-line again or not:
auto - automatic . In this case, the failed card/port will become
on-line again after recovery, automatically.
manual - In this case, the failed card/port will not become
on-line again after recovery.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.7 |
sysCRdnRecTimeRedundancy Recovery Time (sec). After switching to the current
online card, the next switch can be performed only after a
minimum time, indicated by this object.
This object is applicable only when sysCRdnRecMode=auto.rw INTEGER .1.3.6.1.4.1.164.3.3.1.6.3.1.8 |
sysCRdnHwSwFlipHW or SW decision for Redundancy Flip.
This object is applicable only for sysCRdnMode=singleSlotProtection.
HW - decision is by I/O card
SW - decision is by CL SW.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.9 |
sysCRdnRowStatusThis parameter allows NMS to create/delete entries of this table.rw Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.10 |
sysCRdnOnlineStatus - who is the Online (current) Redundancy Slot/Port.
This object shows only the Online Slot/Port regarding the Redundancy.
mdlSActivity or prtGenActiveStatus of the same Slot/Port may be Offline.ro Enumeration .1.3.6.1.4.1.164.3.3.1.6.3.1.11 |
sysDbase OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.1.7 |
sysDbaseSanityCheckCmdSetting this attribute to on(3) will initiate the process
of Sanity check on the TmpCnfg. Upon completion, the value
will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.1.7.1 |
sysDbaseDownloadCnfgIdxCmdThis attribute specifies the Id of the target RealCnfg to
which the TmpCnfg should be transferred. Upon set command,
the DACS agent will initiate the Sanity-Check process.
If successful, the actual transfer will be performed.
If there will be errors, the user will have to perform
the command again after errors correction.
The operation is valid only on configuration numbers
that do not exceed sysSMaxNoOfCnfg.rw INTEGER .1.3.6.1.4.1.164.3.3.1.7.2 |
sysDbaseUploadCnfgIdxCmdThis attribute specifies the Id of the source Cnfg to be
loaded into the TmpCnfg. Upon set operation the actual
transfer will be initiated.
The operation is valid only on configuration numbers
that do not exceed sysSMaxNoOfCnfg.rw INTEGER .1.3.6.1.4.1.164.3.3.1.7.3 |
sysDbaseFlipTableDbase Flip time and activation for every configuration. SEQUENCE OF SysDbaseFlipEntry .1.3.6.1.4.1.164.3.3.1.7.4 |
sysDbaseFlipEntry SysDbaseFlipEntry .1.3.6.1.4.1.164.3.3.1.7.4.1 |
sysDbaseFlipIdxThis attribute indicates the Idx of the Cnfg being
the target Configuration.ro INTEGER .1.3.6.1.4.1.164.3.3.1.7.4.1.1 |
sysDbaseFlipTimeThis attribute indicates the time (HH:MM) when this data
base will start being used by the Tmp config.rw DisplayString .1.3.6.1.4.1.164.3.3.1.7.4.1.2 |
sysDbaseFlipActivationThis attribute indicates if the Dbase flip will be
activated at the time specified for this configuration
(enable) or not (disable).
No more than one flip should be enabled for the same time.rw Enumeration .1.3.6.1.4.1.164.3.3.1.7.4.1.3 |
mdlDacsMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.2 |
mdlGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.2.1 |
mdlSTable SEQUENCE OF MdlSEntry .1.3.6.1.4.1.164.3.3.2.1.1 |
mdlSEntry MdlSEntry .1.3.6.1.4.1.164.3.3.2.1.1.1 |
mdlSSltIdxA unique number to identify a slot position in the DACS.
The Kilomux should use enumerated values starting with kmx.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.1 |
mdlSCardTypeThis attribute indicates the type of the card installed
in the specific slot position.
Only PS's are possible in the PS slots.
Only CL's are possible in the CL slots.
Only IO modules are possible in the IO slots.
Kmux card type start with the letter k.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.2 |
mdlSHwVerThis attribute indicates the Hardware version of the
card installed in the specific slot position.ro DisplayString .1.3.6.1.4.1.164.3.3.2.1.1.1.3 |
mdlSSwVerThis attribute indicates the Software version of the
card installed in the specific slot position.ro DisplayString .1.3.6.1.4.1.164.3.3.2.1.1.1.4 |
mdlSAlarmStatusIndicates the current alarm state only for card level.
This object will be set to:
- major (3): when there is at least one active (ON) major
alarm .
- minor (4): when there is no active major alarm, but
there is at least one active minor alarm.
- off(2): when there is no active (ON) major or minor alarms
(since last clear operation).ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.5 |
mdlSAlarmStatusAllIndicates the current card alarm state including the
lower level: card, port.
This object will be set to:
- major (3): when there is at least one active (ON) major
alarm .
- minor (4): when there is no active major alarm, but
there is at least one active minor alarm.
- off(2): when there is no active (ON) major or minor alarms
(since last clear operation).ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.6 |
mdlSTestStatusThis attribute will be on(3) when there is at least
one test running on a port of the module; otherwise the value
will be off(2).ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.7 |
mdlSHwStatusThis attribute will be fail(2) when a HW FAIL exists
on this module (discovered by periodic self test);
otherwise the value will be ok(3).ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.8 |
mdlSActivitynotApplicable - when the slot is empty (no module)
offline(1) - when the module is not active (redundant)
online (2) - when the module is active .ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.9 |
mdlSAlrClearCmdSetting this attribute to ON, will enforce a clear
operation on the card level alarms . Upon completion,
the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.10 |
mdlSAlrClearAllCmdSetting this attribute to ON, will enforce a clear
operation on card and port level alarms . Upon completion,
the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.11 |
mdlSAlrMaskAllon(3) - will cause masking of all the card level alarms.
These alarms will not be sent to NMS and will not
be taken into account for Alarms Status.
off(2) - will unmask all card level alarms except those
masked via the mdlAlrMaskTable.rw Enumeration .1.3.6.1.4.1.164.3.3.2.1.1.1.12 |
mdlSCmdGeneral object for any special command at card level.
0=NotApplicable, for cards that don't support this object.
For KML.10(ISDN) card of KM-2100, the object will indicate
Manual Call Command in Switch mode. It is applicable only when
for KML.10, prtIsdnSwitchMode=manual.
KML.10 valid values:
'1' = noOp, will be used by agents that does not support this
feature or object
'2' = off, Set call command mode to disconnect state. Disconnects the call.
'3' = on, Set call command mode to connect state. Connects the call.rw INTEGER .1.3.6.1.4.1.164.3.3.2.1.1.1.13 |
mdlCTable SEQUENCE OF MdlCEntry .1.3.6.1.4.1.164.3.3.2.1.2 |
mdlCEntry MdlCEntry .1.3.6.1.4.1.164.3.3.2.1.2.1 |
mdlCConfigIdxThis object indicates the Configuration number (1..255)
referred.
Value of 255 specifies the TmpCnfg (Scratch).ro INTEGER .1.3.6.1.4.1.164.3.3.2.1.2.1.1 |
mdlCSlotIdxThis object indicates a unique number of the slot position
in which the module is inserted.
The Kilomux should use enumerated values starting with kmx.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.2.1.2 |
mdlCProgCardTypeThis object indicates the card type assigned to the specific
slot in the common configuration.
This object is identical for all the configurations (1..255).
Only the TmpCnf(255) might have a different value.
The write operation is valid only for the TmpCnfg entry.rw Enumeration .1.3.6.1.4.1.164.3.3.2.1.2.1.3 |
mdlCNoOfExtPrtNumber of external ports in the programmed module of
the specific slot positionro INTEGER .1.3.6.1.4.1.164.3.3.2.1.2.1.4 |
mdlCNoOfIntPrtNumber of internal ports in the programmed module of
the specific slot position.ro INTEGER .1.3.6.1.4.1.164.3.3.2.1.2.1.5 |
mdlAlr OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.2.1.3 |
mdlAlrTableThe list of card alarms. SEQUENCE OF MdlAlrEntry .1.3.6.1.4.1.164.3.3.2.1.3.1 |
mdlAlrEntry MdlAlrEntry .1.3.6.1.4.1.164.3.3.2.1.3.1.1 |
mdlAlrIdxA unique number to identify an entry in the alarm status
table.
Users should use the get next function to read this table
because the indexes are not consecutivero INTEGER .1.3.6.1.4.1.164.3.3.2.1.3.1.1.1 |
mdlAlrSltIdxThis attribute indicates the desired slot position.
The Kilomux should use enumerated values starting with kmx.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.3.1.1.2 |
mdlAlrCodeThis object indicates a code related to a specific
alarm description. The list of codes and their related
descriptions will be sent to NMS request (for display purpose)
by alrGenTable.ro INTEGER .1.3.6.1.4.1.164.3.3.2.1.3.1.1.3 |
mdlAlrStateThis object indicates the card alarm state.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.3.1.1.4 |
mdlAlarmMaskAlarm Mask is : on/off.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.3.1.1.5 |
mdlAlarmInvertAlarm Invert is : on/off.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.3.1.1.6 |
mdlAlrMaskTableThe list of card masked alarms. SEQUENCE OF MdlAlrMaskEntry .1.3.6.1.4.1.164.3.3.2.1.3.2 |
mdlAlrMaskEntry MdlAlrMaskEntry .1.3.6.1.4.1.164.3.3.2.1.3.2.1 |
mdlAlrMaskSltIdxThis attribute indicates the desired slot position.
The Kilomux should use enumerated values starting with kmx.ro Enumeration .1.3.6.1.4.1.164.3.3.2.1.3.2.1.1 |
mdlAlrMaskThis object is a mask that indicates which card level
alarms are masked. The masked alarms (their bit is set to
'1') are neither sent to the manager, nor taken into account
for alarm status and LEDs.
Bit no. = Alarm code
The bits that do not belong to the card level will be 0.
This object is applicable only when mdlSAlrMaskAll=off
(otherwise all card alarms are masked).
Example: When Alarm having the code 8 is masked,
the value of this object will be 100 (hex).rw OCTET STRING .1.3.6.1.4.1.164.3.3.2.1.3.2.1.2 |
mdlCl OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.2.2 |
mdlClTable SEQUENCE OF MdlClEntry .1.3.6.1.4.1.164.3.3.2.2.1 |
mdlClEntry MdlClEntry .1.3.6.1.4.1.164.3.3.2.2.1.1 |
mdlClIdxThis object indicates the Cl slot referred.ro Enumeration .1.3.6.1.4.1.164.3.3.2.2.1.1.1 |
mdlClSwchStatusThis object indicates the status of the switches on
the referred DCL card.
Each switch is represented by a bit. The status is a sum
of 2**n, according to the bits. There are 4 switches:
bit 0 SP-PAR (LSB) '1' - Default parameters
bit 1 PSWRD '1' - Password=default
'0' - Password=user selected
bit 2 DB-INIT '1' - DB initiated with default
'0' - DB initiated with NVRAM contents
bit 3 PC-SP (MSB) '1' - Management by terminal only
'0' - Management by NMS
Example: If SP-PAR and PSWRD bits are set ('1'), the value
will be 3 (2**1 + 2**0).
When the status of the switches is unknown, the value of
this object will be 255.ro INTEGER .1.3.6.1.4.1.164.3.3.2.2.1.1.2 |
mdlClLastFlipDateDate when last flip occured.
The format would be as specified by the sysSDateFormat.ro DisplayString .1.3.6.1.4.1.164.3.3.2.2.1.1.3 |
mdlClLastFlipTimeTime when last flip occured.ro DisplayString .1.3.6.1.4.1.164.3.3.2.2.1.1.4 |
mdlClLastFlipCauseThe cause of last flip.ro DisplayString .1.3.6.1.4.1.164.3.3.2.2.1.1.5 |
mdlPs OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.2.3 |
mdlPsTable SEQUENCE OF MdlPsEntry .1.3.6.1.4.1.164.3.3.2.3.1 |
mdlPsEntry MdlPsEntry .1.3.6.1.4.1.164.3.3.2.3.1.1 |
mdlPsIdxThis object indicates the PS card referred.ro Enumeration .1.3.6.1.4.1.164.3.3.2.3.1.1.1 |
mdlPsStatusThis object indicates the status of the PS card.ro Enumeration .1.3.6.1.4.1.164.3.3.2.3.1.1.2 |
mdlPsTestResultThis object indicates the result of the PS card test.
ok (1) - the test passed successfully.
f12V (2) - 12V FAIL was detected
f5V (3) - 5V FAIL was detected.ro Enumeration .1.3.6.1.4.1.164.3.3.2.3.1.1.3 |
prtDacsMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3 |
prtGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.1 |
prtGenParamTable SEQUENCE OF PrtGenEntry .1.3.6.1.4.1.164.3.3.3.1.1 |
prtGenEntry PrtGenEntry .1.3.6.1.4.1.164.3.3.3.1.1.1 |
prtGenPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.
In the Kilomux, the port index is calculated as follows:
100*Slot+Ch. The external Ch numbers are 1..10, and the
internal Ch numbers are 11..20.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.1.1.1 |
prtGenSltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
The Kilomux should use the enumerated starting with kmx.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.2 |
prtGenExtIntThis attribute describes the type of the designated port.
Exteral port is a port with a physical connector. Internal
port might be of two types, one is a composite port which
collects data of a few external ports into a common
bandwidth (usually routed trough DS1 link); the other type is
internal ports which get only part of external port data
(usually a few DS0's).
In the Kilomux-2100, the internal(3) value is used for
composite channels or sub-channels of an ISDN Ch.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.3 |
prtGenIfIndexThis attribute indicates the unique interface number
assigned to the port. The specific interface of this
attribute is the same as the interface identified by the
value of ifindex in MIB-II.If there is no interface for the
specific prtIdx, the value will be '7fffffff'h.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.1.1.4 |
prtGenActiveStatusThis attribute describes the activity status of the port.
unknown(1) indicates that the information is not supported.
notUsed(2) indicates that the port is not connected according
to the active config.
offLine(3) indicates that the port is down (not working)
due to any problem.
onLine (4) indicates that the port is up (working)
offLineRedundancy(5) indicates that the port is down because
it is a redundant port.
onLineRedundancy (6) indicates that this is a redundant port
which is up and works as the active link.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.5 |
prtGenAlrStatusIndicates the alarm state at port (ch) agent level.
This object will be set to:
- major (3): when there is at least one active (ON) major
alarm .
- minor (4): when there is no active major alarm, but
there is at least one active minor alarm.
- off(2): when there is no active (ON) major or minor alarms
(since last clear operation).ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.6 |
prtGenTestStatusThis attribute will be on(3) when there is at least one test
in progress (running) on the port; otherwise the value will
be off(2).ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.7 |
prtGenTestMaskThis is a mask which indicates which tests from the
'prtGenTestCmd' list are allowed for the selected port.
If a specific test is allowed, its respective bit will be SET
in the mask :
TEST BIT
-
localLoop 1
remoteLoop 2
bert 3
plb 4
inband 5
prbs 8
loop2-v54 (RLB) 9
loop3-v54 (LLB) 10
Tone injection 13
Tx-plb 14
Tx-llb 15
DTE loop (HSSI) 16
HDSL-Tx-Inband 20
HDSL-Rx-Inband 21
Monitor 22 (test port)
User Line Loopback 23
e.g : If the return value is 3 -> 0000000000000011 ->
Bits 1 & 2 are set -> the allowed tests are :
local-loop
remote-loopro INTEGER .1.3.6.1.4.1.164.3.3.3.1.1.1.8 |
prtGenTestCmdSetting this object to a value as detailed furter on
(except 0) will initiate a test on the specific port,
if the operation is allowed (according to TestMask).
If the operation is not allowed, the mux will ignore the
operation.
The test/s requested will be set according to the respective
bit:
TEST BIT
-
localLoop 1
remoteLoop 2
bert 3
plb 4
inband 5
prbs 8
loop2-v54 (RLB) 9
loop3-v54 (LLB) 10
Tone injection 13
Tx-plb 14
Tx-llb 15
DTE loop (HSSI) 16
HDSL-Tx-Inband 20
HDSL-Rx-Inband 21
Monitor 22 (test port)
User Line Loopback 23
e.g : If the requested value is 3 -> 0000000000000011 ->
Bits 1 & 2 are set -> the requested tests are :
local-loop
remote-loop
Setting this object to stop (value=0 ; all bits are 0),
will stop all the user requested tests running on the
selected port; it will NOT stop the tests initiated by
the system.rw INTEGER .1.3.6.1.4.1.164.3.3.3.1.1.1.9 |
prtGenTestRunningThis object indicates which tests are running currently on
the selected port (initiated by user and/or by the system).
If a specific test is currently running on the port, its
respective bit will be SET:
TEST BIT
-
localLoop 1
remoteLoop 2
bert 3
plb 4
llb 5
txInband 6
rxInband 7
prbs 8
loop2-v54 (RLB) 9
loop3-v54 (LLB) 10
DDS DSU loop 11
DDS CSU loop 12
Tone injection 13
Tx-plb 14
Tx-llb 15
DTE loop (HSSI) 16
Local DTE loop (HSSI)17
Local Line loop (HSSI)18
Remote Line loop (HSSI)19
HDSL-Tx-Inband 20
HDSL-Rx-Inband 21
Monitor 22 (test port)
User Line Loopback 23
Network Line Loopback 24
e.g : If the return value is 3 -> 0000000000000011 ->
Bits 1 & 2 are set -> the running tests are :
local-loop
remote-loop
llb (Bit 5) - can be initiated by system only!ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.1.1.10 |
prtGenTypeThis object describes the type of the selected port.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.11 |
prtGenInterfaceTypeThis attribute indicates a unique HW interface type of the
selected port.
Examples:
- for T1 cards: DSU, CSU
- for E1 cards: DSU, LTU
- for HS cards: v35, rs422, x21
etc...ro DisplayString .1.3.6.1.4.1.164.3.3.3.1.1.1.12 |
prtGenAlrClearCmdSetting this attribute to ON, will enforce a clear
operation on the port level alarms . Upon completion,
the value will automatically change to off(2).
noOp - will be used by agents that do not support this
feature or object.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.13 |
prtGenAlrMaskAllon(3) - will mask all the alarms of the selected port
off(2)- will unmask all alarms of the selected port except
the ones selected by the prtAlrMaskTable.
noOp - will be used by agents that do not support this
feature or object.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.1.1.14 |
prtGenParamStatusThis object indicates Status of parameters specific to the
selected port.
- For a port that has no special status or is supported
by prtSExHsfStatTable - 1 Octet: 00hex
- For HS cards - 1 octet:
Bit 7 (MSB)..Bit 2 = 0 (NA)
Bit 0 and 1 indicates RTS control signal state:
Bit 1: '1'=active ; '0'=notActive
Bit 0 (LSB): '1'=unknown ; '0'=NA
- For VC-6, VC-12, VC-12/6 external ports - 1 Octet :
Bit 7 (MSB)..Bit 2 = 0 (NA)
Bit 1: Tx Signaling '1'=On ; '0'=Off
Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off
- For VC-2/R2(FXS) external ports - 1 Octet :
Bit - 7 6 5 4 3 2 1 0
|_| |_________|
Call Call State
Direction
Bit 7 (MSB) and Bit 6 : Call Direction
00 - Incoming
01 - Outgoing
Bit 5..Bit 0: Call State
000000 - Idle
000001 - Seized
000010 - Both-Way Conflict
000011 - Seizure Ack
000100 - Answered
000101 - Clear Backward
000110 - Clear Forward
000111 - Blocked
001000 - Fault
001001 - Fault 3
001010 - Fault 4
001011 - Fault 5
001100 - Fault 6
001101 - Fault 7
- For ML-20 external port - 3 Octets :
- 1 MS Octet will represent the Real Rate used:
Bit - 7 6 5 4 3 2 1 0
|___| |_______|
spare Rate
Valid values: 0..31, meaning 0..31x64Kbps
Invalid values: 32..255.
- 2 LS Octets will represent the Status of 7 Control
Signals:
Signal -
Bit - 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
Octet - 2 3 (LS)
'
Rest of the Signals (2 bits each) can have the following
values:
00=NA ; 01=Unused ; 10=Off ; 11=On
- For ML-H/E1, ML-H/1/E1, ML-H/S/E1 internal port - 1 Octet
Bit - 7 6 5 4 3 2 1 0
|___________|
spare Mode of Operation
Mode of Operation: '1'=Central ; '0'=Remote
- For KM2100, KVF.5 cards - indicates the status of A and B signaling
for each internal channel.
1 Octet:
Bit - 7 6 5 4 3 2 1 0
|_____| |_| |_|
spare B A
Bit 0 (LSB) and Bit 1 : A status
Bit 2 and Bit 3 : B status
00 - Off
01 - On
11 - Unknown
- For FCD-W, NETWORK and USER ports - 1 Octet
Status of Control Signals: '1'=On ; '0'=Off or when not applicable
Bit - 7 6 5 4 3 2 1 0
Bit 7 (MSB) - Signal Loss (applicable only for G.703 interface)
Bit 6 - CONTROL (applicable only for X.21 interface)
Bit 5 - INDICATION (applicable only for X.21 interface)
Bit 4 - DSR (applicable only for V.35 interface)
Bit 3 - RTS (applicable only for V.35 interface)
Bit 2 - CTS (applicable only for V.35 interface)
Bit 1 - DTR (applicable only for V.35 interface)
Bit 0 - DCD (applicable only for V.35 interface)ro OCTET STRING .1.3.6.1.4.1.164.3.3.3.1.1.1.15 |
prtGenTestDurationTable SEQUENCE OF PrtGenTestDurationEntry .1.3.6.1.4.1.164.3.3.3.1.2 |
prtGenTestDurationEntry PrtGenTestDurationEntry .1.3.6.1.4.1.164.3.3.3.1.2.1 |
prtGenTestPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.
In the Kilomux, the port index is calculated as follows:
100*Slot+Ch. The external Ch numbers are 1..10, and the
internal Ch numbers are 11..20.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.2.1.1 |
prtGenTestIdxThis attribute indicates the test, the duration refers.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.2.1.2 |
prtGenTestDurationThis attribute indicates the maximum duration of executing
a test on the specific port. This entry applies to the
specified test . The resolution will be a minute, and the
maximum duration is limited to 30 minutes .
A zero value specifies no time limitation.
When the test isn't active the agent initiates this object to
2 min. when the duration is needed and to 0 if it's not
required.rw INTEGER .1.3.6.1.4.1.164.3.3.3.1.2.1.3 |
prtGenTsTableThe write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch). SEQUENCE OF PrtGenTsEntry .1.3.6.1.4.1.164.3.3.3.1.3 |
prtGenTsEntry PrtGenTsEntry .1.3.6.1.4.1.164.3.3.3.1.3.1 |
prtGenTsCnfgIdxThis attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.3.1.1 |
prtGenTsPrtIdxThis attribute indicates a unique port number.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.3.1.2 |
prtGenTsIdxThis attribute indicates a unique time slot position.
The valid time slots are
1..25 for T1 Card (25=Fbit)
0..31 for E1 or HS Card .
In G732S-E1 lines time slot 16 is not valid for data,
it is dedicated for multiframe synchronization bits
and voice signaling.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.3.1.3 |
prtGenTsTypeThe type of Timeslot.
If the source or destination port is an HS port,'TS Type'
must be 'data'.
nc - means that this TimeSlot is not connected.
voice, data, vcMP - also mean that this TS is connected.
mng - means that this TS is dedicated to Management (not
connected to another port.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.3.1.4 |
prtGenTsIConPrtThis attribute indicates the internally (In Mux)
connected port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The outside ports will be the T1/E1 cards ports.
The convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
for a stand-alone unit, the IO slot will be considered 1.
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside ports will be for example, the HS cards ports.
The convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
for a stand-alone unit, the IO slot will be considered 1.
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
* noConnection - will be indicated as 10 for DXC and FCD-E1/T1.
- will be indicated as 100 for FCD-E1/I and SMODs.
* Split TS (same TS is Split to several ports) - 11.
All HS port's timeslots must have the same destination
port.rw INTEGER .1.3.6.1.4.1.164.3.3.3.1.3.1.5 |
prtGenTsIConTsThis attribute indicates a unique time slot position.
The valid time slots are
1..25 for T1 Card (25=Fbit)
0..31 for E1 (or HS) Card.
In G732S-E1 lines time slot 16 is not valid for data, it is
dedicated for multiframe synchronization bits and voice
signaling.
* For DXC: All HS port's timeslots must start with Timeslot
no.1rw INTEGER .1.3.6.1.4.1.164.3.3.3.1.3.1.6 |
prtAlr OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.1.4 |
prtSAlarmTable SEQUENCE OF PrtSAlarmEntry .1.3.6.1.4.1.164.3.3.3.1.4.1 |
prtSAlarmEntry PrtSAlarmEntry .1.3.6.1.4.1.164.3.3.3.1.4.1.1 |
prtSAlarmIdxA unique number to identify an entry in the alarm status
table.
Users should use the get next function to read this table
because the indexes are not consecutive.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.4.1.1.1 |
prtSAlarmPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.
In the Kilomux, the port index is calculated as follows:
100*Slot+Ch. The external Ch numbers are 1..10, and the
internal Ch numbers are 11..20.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.4.1.1.2 |
prtSAlarmCodeThis object indicates a code related to a specific
alarm description. The list of codes and their related
descriptions will be sent to NMS request (for display purpose)
by alrGenTable.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.4.1.1.3 |
prtSAlarmStateThis object indicates the port alarm state.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.4.1.1.4 |
prtSAlarmMaskAlarm Mask is : on/off.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.4.1.1.5 |
prtSAlarmInvertAlarm Invert is : on/off.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.4.1.1.6 |
prtAlrMaskTable SEQUENCE OF PrtAlrMaskEntry .1.3.6.1.4.1.164.3.3.3.1.4.2 |
prtAlrMaskEntry PrtAlrMaskEntry .1.3.6.1.4.1.164.3.3.3.1.4.2.1 |
prtAlrMaskPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.
In the Kilomux, the port index is calculated as follows:
100*Slot+Ch. The external Ch numbers are 1..10, and the
internal Ch numbers are 11..20.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.4.2.1.1 |
prtAlrMaskThis object is a mask that indicates which port level
alarms are masked. The masked alarms (their bit is set to
'1') are neither sent to the manager, nor taken into account
for alarm status and LEDs.
Bit no. = Alarm code
The bits that do not belong to the port level will be 0.
This object is applicable only when prtGenAlrMaskAll=off
(otherwise all port alarms are masked).
Example: When Alarms having the codes 31 and 40 are masked,
the value of this object will be 10080000000 (hex).rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.1.4.2.1.2 |
prtBertTableThis table includes the BERT parameters, counters and
commands.
The configurable parameters:
- prtBertPattern
- prtBertInjectRate
- prtBertTs
are not Set per configuration (same for all Configurations)
but start being applied by the Agent only upon successful
Update/Download operation. Therefore, Set will enter the
values to the Temporary Configuration of the agent, while
Get will get the values of the Active Configuration. SEQUENCE OF PrtBertEntry .1.3.6.1.4.1.164.3.3.3.1.5 |
prtBertEntry PrtBertEntry .1.3.6.1.4.1.164.3.3.3.1.5.1 |
prtBertPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.
In the Kilomux, the port index is calculated as follows:
100*Slot+Ch. The external Ch numbers are 1..10, and the
internal Ch numbers are 11..20.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
In the MP :
- first two digits will be: (IO slot number+10)
- last one/two digits will be according to the external port
number within the card:
exPrt1 -> 1
exPrt2 -> 3
exPrt3 -> 5
exPrt4 -> 7 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.5.1.1 |
prtBertPatternThis object indicates the pattern of the BERT.
p2Exxm1 = 2Exx-1.
pxx = pattern xx.
This object is the same for all configurations.
notApplicable - when this object is not supported.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.5.1.2 |
prtBertInjectRateThis object indicates the error rate injection of the BERT.
r10Emx = 10E-x
This object is the same for all configurations.
single - single error injection.
notApplicable - when this object is not supported.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.5.1.3 |
prtBertInjectErrRateCmdThis object controls activation/deactivation of the Error
Rate Injection during BERT.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.5.1.4 |
prtBertInjectSingleErrCmdThis object enables to initiate a Single Error Injection
during BERT (on). Upon completion, the value will
automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.5.1.5 |
prtBertRunTimeThis object indicates how much time (seconds) passed since
BERT started to run.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.5.1.6 |
prtBertESsHow many Errored Seconds were detected since BERT started
to run.
Counter for Kmux and MP.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.5.1.7 |
prtBertSyncLossHow many times Sync Loss was detected since BERT started
to run.
For some products: number of seconds in which Sync Loss occured
since BERT started to run. See product specification.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.5.1.8 |
prtBertErrorBitsHow many Error Bits were detected since BERT started
to run.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.5.1.9 |
prtBertClearCountersSetting this object to ON, will enforce a clear
operation of some BERT Counters. Upon completion,
the value will automatically change to off(2).rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.5.1.10 |
prtBertSyncStatusSync Status while BERT runs.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.5.1.11 |
prtBertTsThis object indicates on which TSs of the selected port, BERT
should be applied.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB
Bit 0 will not be used.
If the bit value is '1' - BERT should be applied on this TS.
For a T1 port, the valid raised bits ('1') are: 1..25.
For an E1 port, the valid raised bits ('1') are: 1..31.
Agents that do not support this feature will send SIZE 0.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.1.5.1.12 |
prtMonTableThe write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch). SEQUENCE OF PrtMonEntry .1.3.6.1.4.1.164.3.3.3.1.6 |
prtMonEntry PrtMonEntry .1.3.6.1.4.1.164.3.3.3.1.6.1 |
prtMonCnfgIdxThis object indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.6.1.1 |
prtMonitoringIdxThis object indicates the Monitoring Port Index.
The valid port number depends on the IO slot no., the
installed card type and the port type: external, internal.
* The external ports will according to the convention (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The internal ports will be according to the convention (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.6.1.2 |
prtMonitoringEnableThis object indicates if the prtMonitoringIdx is configured as
a monitoring port or not.
disabled = the port is NOT configured to monitor. Setting this object
to this value will cause reset (to 0) of the prtMonitoringTSs
and prtMonitoredTSs objects.
enabled = the port IS configured to monitor.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.6.1.3 |
prtMonitoringTSsThis object indicates which TSs of the Monitoring port,
the test equipment should monitor.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB
Bit 0 will not be used.
If the bit value is '1' - this TS should be monitored.
For a T1 port, the valid raised bits ('1') are: 1..24.
For an E1 port, the valid raised bits ('1') are: 1..31.
Default: all bits='0'
Agents that do not support this feature will send SIZE 0.
This object can be Set as described only if prtMonitoringEnable=enabled.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.1.6.1.4 |
prtMonitoredPortThis object indicates the MONITORED Port Index that the Monitoring
port monitors.
The valid port number depends on the IO slot no., the
installed card type and the port type: external, internal.
* The external ports will according to the convention (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The internal ports will be according to the convention (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
* 100 - no port monitoredrw INTEGER .1.3.6.1.4.1.164.3.3.3.1.6.1.5 |
prtMonitoredTSsThis object indicates which TSs of the Monitored port, should be monitored.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB
Bit 0 will not be used.
If the bit value is '1' - this TS should be monitored.
For a T1 port, the valid raised bits ('1') are: 1..24.
For an E1 port, the valid raised bits ('1') are: 1..31.
Default: all bits='0'
Agents that do not support this feature will send SIZE 0.
This object can be Set as described only if prtMonitoringEnable=enabled.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.1.6.1.6 |
prtCfgParam OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.1.7 |
prtCfgParamTableThe write operation into the Table Objects is valid only
to the TmpCnfg entry.
Parameters for the channels of the KMUX Cards: KMBE/New, KVF.6 family. SEQUENCE OF PrtCfgParamEntry .1.3.6.1.4.1.164.3.3.3.1.7.1 |
prtCfgParamEntry PrtCfgParamEntry .1.3.6.1.4.1.164.3.3.3.1.7.1.1 |
prtCfgParamCnfgIdxThis attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.7.1.1.1 |
prtCfgParamIdxA unique identifier of the port (within the card when applicable).
- For KM-2100: Slot*100+Ch
external ports: Ch=1..10
internal ports (sub-channels): Ch=11..20.
- For FCD-T1/E1: SUB=113, CH1=122, CH2=124.ro INTEGER .1.3.6.1.4.1.164.3.3.3.1.7.1.1.2 |
prtCfgParamSltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid.
notApplicable(255) - for products that do not have Slots.ro Enumeration .1.3.6.1.4.1.164.3.3.3.1.7.1.1.3 |
prtCfgParamOperatedMlThe main link for this channel.
The field is relevant only for ML modes of Dual, Priority
Bumping and Switched Backup.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.7.1.1.4 |
prtCfgParamMlAtoMlBPrioML-A to ML-B Priority.
The field is relevant only for ML modes of Priority Bumping
and Switched Backup.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.7.1.1.5 |
prtCfgParamMlBtoMlAPrioML-B to ML-A Priority.
The field is relevant only for ML modes of Priority Bumping.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.7.1.1.6 |
prtCfgParamInbandLoopDetectionInband Loop Detection.
The field is relevant for the following FCD-T1/E1 ports:
SUB, CH1, CH2.rw Enumeration .1.3.6.1.4.1.164.3.3.3.1.7.1.1.7 |
prtT1E1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.2 |
prtT1E1StatTableT1/E1 port statistics table. SEQUENCE OF PrtT1E1StatEntry .1.3.6.1.4.1.164.3.3.3.2.1 |
prtT1E1StatEntryAn entry in the T1/E1 port statistics table. PrtT1E1StatEntry .1.3.6.1.4.1.164.3.3.3.2.1.1 |
prtT1E1SPrtIdxThis attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The outside ports will be the T1/E1 cards ports.
The convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.2.1.1.1 |
prtT1E1SSltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.3.2.1.1.2 |
prtT1E1OosCountThis object is applicable only for an E1 active port.
It provides the number of red alarm events since the last
count clearing.ro Gauge .1.3.6.1.4.1.164.3.3.3.2.1.1.3 |
prtT1E1BpvLastMinThis object is applicable only for an E1 active port.
It provides the number of BPV (BiPolar Violation) events
detected during the last minute.ro Gauge .1.3.6.1.4.1.164.3.3.3.2.1.1.4 |
prtT1E1BpvMaxThis object is applicable only for an E1 active port.
It provides the maximal number of BPV (BiPolar Violation)
events (per minute), detected during the worst minute.ro Gauge .1.3.6.1.4.1.164.3.3.3.2.1.1.5 |
prtT1E1CnfgTableT1/E1 port configuration table. SEQUENCE OF PrtT1E1CnfgEntry .1.3.6.1.4.1.164.3.3.3.2.2 |
prtT1E1CnfgEntryAn entry in the T1/E1 port configuration table. PrtT1E1CnfgEntry .1.3.6.1.4.1.164.3.3.3.2.2.1 |
prtT1E1CnfgIdxThis attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.ro INTEGER .1.3.6.1.4.1.164.3.3.3.2.2.1.1 |
prtT1E1PrtIdxThis attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
In the Kilomux, the port index is calculated as follows:
100*Slot+Ch. The external Ch numbers are 1..10, and the
internal Ch numbers are 11..20.ro INTEGER .1.3.6.1.4.1.164.3.3.3.2.2.1.2 |
prtT1E1SltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.3 |
prtT1E1LineTypeThis variable indicates the variety of T1/E1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics. The values, in sequence, describe:
TITLE: SPECIFICATION:
esf Extended SuperFrame DS1
d4 AT&T D4 format DS1 - SF
e1 CCITT Recommendation G.704
(Table 4a) - G732N
e1Crc CCITT Recommendation G.704
(Table 4b) - G732N with CRC
e1MF G.704 (Table 4a) with TS16
multiframing enabled - G732S
e1CrcMF G.704 (Table 4b) with TS16
multiframing enabled - G732S with CRC
unframed
T1 - applicable values: (1),(2),(3),(8)
E1 - applicable values: (1),(4),(5),(6),(7),(8)rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.4 |
prtT1E1LineCodeThis variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
jbzs=b7zs refers the Jammed Bit Zero Suppres-
sion, in which the AT&T specification of at
least one pulse every 8 bit periods is literal-
ly implemented by forcing a pulse in bit 8 of
each channel. Thus, only seven bits per chan-
nel, or 1.344 Mbps, is available for data (used for T1).
b8zs refers to the use of a specified pattern
of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits (used for T1).
ANSI Clear Channels may use zbtsi, or Zero
Byte Time Slot Interchange.
E1 links, with or without CRC, use hdb3 or
ami (= TRAN).
amI (=TRAN) refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.5 |
prtT1E1SignalMode'none' indicates that no bits are reserved for
signaling on this channel.
'robbedBit' indicates that T1 Robbed Bit Signaling is in use.
'bitOriented' indicates that E1 Channel Associated
Signaling (CAS) is in use.
'messageOriented' indicates that Common Channel Signaling
(CCS) is in use either on channel 16 of an E1 link or
channel 24 of a T1.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.6 |
prtT1E1FdlThis bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'att-54016' refers to ESF FDL exchanges.
'fdl-none' indicates that the device does
not use the FDL.
'transFdl' indicates transition between two ports of
the same card.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.7 |
prtT1E1FdlModeFdl Mode of the T1 selected port.
notApplicable - will be used for an E1 port.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.8 |
prtT1E1SyncThis object enables returning to normal operation, after
the end of a main/sub link red alarm event, in reduced time.
'tr62411' - complies with AT&T TR-62411 (after 10 seconds).
Applicable for both T1 and E1 interfaces.
'ccitt' - complies with CCITT standard. Applicable only
for E1 interfaces.
'fast' - after 1 second.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.9 |
prtT1E1CGAThis object selects the method used to signal the CGA state
to the other end, through the main/sub link.
'none' - non-transparent mode. When one of the links
(main/sub) will be in Out Of Service state, both
'Data/Voice Oos' and 'Oos Signal' will be
transmitted to the other end.
'trans' - when one of the links (main/sub) will be in Out
Of Service state, 'Data/Voice Oos' will be
transmitted to the other end.
'full' - fully-transparent mode. When one of the links
(main/sub) will be in Out Of Service state,
neither 'Data/Voice Oos' nor 'Oos Signal' will
be transmitted to the other end.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.10 |
prtT1E1IdleCodeThis object selects the code transmitted to fill idle
(unused) time slots in the main link frame.
Valid range: (0 - FF HEX) .rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.2.2.1.11 |
prtT1E1OosSignal'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state
'forcedIdle' = SP = both A and B signaling bits are forced
to '0' during out-of-service periods.
'forcedBusy' = MK = both A and B signaling bits are forced
to '1' during out-of-service periods.
'busyIdle' = MK_SP = A and B bits are forced to '1' for
2.5 seconds; then they are switched to '0'
until out-of-service condition disappears.
'idleBusy' = SP_MK = A and B bits are forced to '0' for
2.5 seconds; then they are switched to '1'
until out-of-service condition disappears.
- for T1: '0'=0 ; '1'=1
- for E1: '0'=1 ; '1'=0rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.12 |
prtT1E1VoiceOosVoice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.2.2.1.13 |
prtT1E1DataOosData Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.2.2.1.14 |
prtT1E1LineLengthMaskThis attribute is the line length mask parameter used only
for T1/DSU interfaces.
len400p533ft=length range: 400ft to 533ft
'fcc68' - provides compliance with the FCC 68.308 Option A
output pulse mask.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.15 |
prtT1E1TxGainMaskThis attribute is the tx gain mask parameter (dB), used
only for T1/CSU interfaces.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.16 |
prtT1E1InbandMngA unique number to identify an Inband management over the
link.
internal - supported by KM-2100 only. It means that the management is internal
to the frame. It takes part of the ML Frame bits (instead of data).rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.17 |
prtT1E1InbandMngRateA unique number to identify the rate of the Inband management.
It is required only for E1 links and is applicable only when
prtExT1E1InbandMng selected is FdlOrTs0 or dedicatedTs.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.18 |
prtT1E1DedicatedTsA unique number to identify Dedicated TS of the T1/E1 port.
It is applicable only when prtExT1E1InbandMng selected is
dedicatedTs.
1..24 - Dedicated TS of T1
1..31 - Dedicated TS of E1
255 - notApplicable (for agents that do not support this
feature)
Other values are invalid.rw INTEGER .1.3.6.1.4.1.164.3.3.3.2.2.1.19 |
prtT1E1InbandMngRoutProtInband Mng Routing Protocol of the port.
When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and
'rip2' are applicable.
For other values - only 'proprietary' is applicable.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.20 |
prtT1E1LinkModeregular - TSs are connected by user via TS Assignment only
transparent - when a port with this Link Mode is connected to an
internal T1/E1 port of a T3/E3 card, TS0, TS16 and Fbit
are transparently transferred to the E3/T3 stream.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.21 |
prtT1E1MultiplierThe data rate of each TS. The multiplier values
can be 56 kbps or 64 kbps. For T1 only.rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.22 |
prtT1E1RxGainThis attribute is the rx volume (dB).rw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.23 |
prtT1E1RAIRemote Alarm Signalrw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.24 |
prtT1E1LineModeInterface type of the port.
For T1 - csu, dsu are the valid values
For E1 - dsu, ltu are the valid valuesrw Enumeration .1.3.6.1.4.1.164.3.3.3.2.2.1.25 |
prtT1E1TS0SaBitsThis object is applicable only for E1 ports. For T1, string size will be 0.
For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets:
The order (in hexa display):
free Sa-Bit-4 Sa-Bit-5 Sa-Bit-6 Sa-Bit-7 Sa-Bit-8
|___________| |________________| |________________|
MSByte LSByte
Each Sa Bit will be represented by a nibble, having the following meaning:
0000 = zero
0001 = one
0010 = management
0011 = transparent
the rest are reserved for future use.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.2.2.1.26 |
prtT1E1FdlMsgTableThis table is applicable for a T1 interface with 'esf'
LineType or E1 interface, when CRC is enabled (LineType). SEQUENCE OF PrtT1E1FdlMsgEntry .1.3.6.1.4.1.164.3.3.3.2.3 |
prtT1E1FdlMsgEntry PrtT1E1FdlMsgEntry .1.3.6.1.4.1.164.3.3.3.2.3.1 |
prtT1E1FdlMsgPrtIdxThis attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The outside ports will be the T1/E1 cards ports.
The convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.2.3.1.1 |
prtT1E1FdlMsgFdlTypeThe Fdl type reference of the Fdl message.ro Enumeration .1.3.6.1.4.1.164.3.3.3.2.3.1.2 |
prtT1E1FdlMsgSltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.3.2.3.1.3 |
prtT1E1FdlMsgFDL message.ro OCTET STRING .1.3.6.1.4.1.164.3.3.3.2.3.1.4 |
prtHS OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.3 |
prtHSParamTable SEQUENCE OF PrtHSParamEntry .1.3.6.1.4.1.164.3.3.3.3.1 |
prtHSParamEntry PrtHSParamEntry .1.3.6.1.4.1.164.3.3.3.3.1.1 |
prtHSCnfgIdxThis attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.ro INTEGER .1.3.6.1.4.1.164.3.3.3.3.1.1.1 |
prtHSPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The inside ports will be the HS cards ports. The
convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.3.1.1.2 |
prtHSSltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.3.3.1.1.3 |
prtHSRateThis object indicates the port rate (speed).rw Enumeration .1.3.6.1.4.1.164.3.3.3.3.1.1.4 |
prtHSFifoSizeThis object selects the size of the user data channel buffer
FIFO used in the DTE2 mode. In the other modes, buffer
size is automatically set by the DACS agent.
Buffer FIFO size in bits, corresponds to FIFO lengths of
+/-16, +/-30, +/-52, +/-72 bits.rw Enumeration .1.3.6.1.4.1.164.3.3.3.3.1.1.5 |
prtHSClkModeClock Mode of the user data channel.
dce - DACS operates as a DCE and provides transmit
and receive clocks to the synchronous user DTE.
dte1- DACS supplies the receive clock to the user
equipment and accepts the user transmit clock.
dte2- DACS requires transmit and receive clocks from
the user equipment.rw Enumeration .1.3.6.1.4.1.164.3.3.3.3.1.1.6 |
prtHSCTSSelection of CTS line state in the user data channel.
on - CTS continuously ON.
rts - CTS line follows the RTS line.rw Enumeration .1.3.6.1.4.1.164.3.3.3.3.1.1.7 |
prtHSRtsStateRTS state of the port.ro Enumeration .1.3.6.1.4.1.164.3.3.3.3.1.1.8 |
prtHSBertTable SEQUENCE OF PrtHSBertEntry .1.3.6.1.4.1.164.3.3.3.3.2 |
prtHSBertEntry PrtHSBertEntry .1.3.6.1.4.1.164.3.3.3.3.2.1 |
prtHSBertPrtIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The inside ports will be the HS cards ports. The
convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.3.2.1.1 |
prtHSBertSltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.3.3.2.1.2 |
prtHSBertCountClrSetting this object (to on) initiate bert counter clear
operation.
Valid only when bert test is active on the specific port.
(Every time a new bert test starts, the counter is
automatically cleared; this command enables clearing
the counter while the test is running).rw Enumeration .1.3.6.1.4.1.164.3.3.3.3.2.1.3 |
prtHSBertTestResultThis object indicates the number of Bit Error Rate indicated
during the BERT test.
Active only when bert test is running on the selected port.ro INTEGER .1.3.6.1.4.1.164.3.3.3.3.2.1.4 |
prtSP OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.4 |
prtSpCnfgTable SEQUENCE OF PrtSpCnfgEntry .1.3.6.1.4.1.164.3.3.3.4.1 |
prtSpCnfgEntryAll the entries at this table are identical(have the same value)
at all the configurations(1..255) except at the TmpCnfg.
- For products supporting more than one configuration, the write operation
into the Table Objects is valid only at the TmpCnfg entry.
- For products that do not support configurations, the write operation
into the Table Objects will be to prtSpCnfgIdx=1. PrtSpCnfgEntry .1.3.6.1.4.1.164.3.3.3.4.1.1 |
prtSpCnfgIdxThis attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.3.4.1.1.1 |
prtSpPrtIdxThis attribute indicates a unique port number of the SPor DP port.
For DXC, it is the port in the active DCL card:
- SP = 1
- NP ; DP = 2
For Kilomux, the port index is calculated as follows:
100*Slot+Ch.
For FCD, PRBi, the SP port index=1.ro INTEGER .1.3.6.1.4.1.164.3.3.3.4.1.1.2 |
prtSpUsageThis attribute indicates what is the usage of the port.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.3 |
prtSpRateThis attribute indicates the operation rate (speed) of the port.
auto - automatic rate selection, by the agent.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.4 |
prtSpDataBitsThis attribute indicates the number of data bits in async
framerw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.5 |
prtSpParityThis attribute indicates the parity mode in async framerw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.6 |
prtSpCallOutModeThis attribute indicates the call-out mode.
For DXC - this object is applicable only for the DP port (2).rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.7 |
prtSpInterfaceThis attribute indicates the supervisory port interface.
dce - the DACS appears as a DCE for the port.
dte - the DACS operates as a DTE, for connection via modem,
for the port.
Port 2 - when DP, will be always dte(2).rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.8 |
prtSpCTSCTS line state. This object is applicable only for
port (1) = SPrw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.9 |
prtSpDcdDelayDCD delay in msec.
d10 = delay of 10msec.
This object is applicable only for port (1) = SPrw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.10 |
prtSpDsrDSR line state. This object is applicable only for
port (1) = SPrw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.11 |
prtSpNoOfRetriesFor DXC - this object is applicable only for port (2) = DP.
The number of dialing retries requested.
Default = 0rw INTEGER .1.3.6.1.4.1.164.3.3.3.4.1.1.12 |
prtSpWaitForConnectFor DXC - this object is applicable only for port (2) = DP.
Waiting time for connect, in seconds.
Default = 30 sec.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.13 |
prtSpDialModeFor DXC - this object is applicable only for port (2) = DP.
Dialing mode.
Default=tonerw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.14 |
prtSpAltNumModeFor DXC - this object is applicable only for port (2) = DP.
It determines wether to use the alternate number or not.
Default = no.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.15 |
prtSpPrimaryNumFor DXC - this object is applicable only for port (2) = DP.
It is the Primary dialing number.rw DisplayString .1.3.6.1.4.1.164.3.3.3.4.1.1.16 |
prtSpAltNumFor DXC - this object is applicable only for port (2) = DP.
It is the Alternate dialing number. This number
is applicable only if prtSpAltNumMode is 'yes'.rw DisplayString .1.3.6.1.4.1.164.3.3.3.4.1.1.17 |
prtSpRoutProtocolThis attribute indicates the routing protocol of the port.
notApplicable - for DP.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.18 |
prtSpCmdSP Command.
For LRS this parameter will be used for a Modem Command.
Upon NMS's Get operation for devices that this parameter
is notApplicable, agent will send NULL string.rw OCTET STRING .1.3.6.1.4.1.164.3.3.3.4.1.1.19 |
prtSpActCallOutThis object indicates when to Activate Call-Out.
It is used by FCD-T1/E1.
always - to activate call-out always.
linkFail - to activate call-out only when Link of Inband Management fails.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.20 |
prtSpAlrRelayModeThis attribute indicates the Alarm Relay Mode.
notApplicable - for DP.rw Enumeration .1.3.6.1.4.1.164.3.3.3.4.1.1.21 |
prtDim OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.5 |
prtDimCnfgTable SEQUENCE OF PrtDimCnfgEntry .1.3.6.1.4.1.164.3.3.3.5.1 |
prtDimCnfgEntryThe write operation into the Table Objects is valid only
for the TmpCnfg entry (prtDimCnfgIdx=255). PrtDimCnfgEntry .1.3.6.1.4.1.164.3.3.3.5.1.1 |
prtDimCnfgIdxThis attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.3.5.1.1.1 |
prtDimIdxThis attribute indicates a unique port number of the
DIM card.
The convention used for DXC:
(IO slot number+10)*10 + 1
Example: port1 of IO slot 11 will be: 211 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.5.1.1.2 |
prtDimTxModeTx mode.
regularTx - the links are connected to a similar outfit on
the other side. In this mode, if a link fails,
the transmitted bandwidth is decreased
accordingly.
broadcast - the links are connected to MORE than one similar
outfit on the other side. In this mode, if a link
fails, the transmitted bandwidth is not affectedrw Enumeration .1.3.6.1.4.1.164.3.3.3.5.1.1.3 |
prtDimPolarityPolarity.rw Enumeration .1.3.6.1.4.1.164.3.3.3.5.1.1.4 |
prtDimClkModeClock Mode.
smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode
the DXC does NOT receive back the clock signal.
extSmooth - same as 'smooth' but in this mode, the DXC receives back
the clock signal.rw Enumeration .1.3.6.1.4.1.164.3.3.3.5.1.1.5 |
prtDimMaxDelayMax Delay permitted between the links, in msec.rw Enumeration .1.3.6.1.4.1.164.3.3.3.5.1.1.6 |
prtDimMngUse of DIM port for management.
disabled - no management on DIM
ts1 - 1 bit of TS1 is used for management.rw Enumeration .1.3.6.1.4.1.164.3.3.3.5.1.1.7 |
prtDimDestTable SEQUENCE OF PrtDimDestEntry .1.3.6.1.4.1.164.3.3.3.5.2 |
prtDimDestEntryThe write operation is valid only for the TmpCnfg entry
(prtDimDestCnfgIdx=255). PrtDimDestEntry .1.3.6.1.4.1.164.3.3.3.5.2.1 |
prtDestCnfgIdxThis attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.ro INTEGER .1.3.6.1.4.1.164.3.3.3.5.2.1.1 |
prtDestDimIdxThis attribute indicates a unique port number of the
DIM card.
The convention used for DXC:
(IO slot number+10)*10 + 1
Example: port1 of IO slot 11 will be: 211 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.5.2.1.2 |
prtDestIdxThis attribute indicates a destination number of the
DIM card.ro INTEGER .1.3.6.1.4.1.164.3.3.3.5.2.1.3 |
prtDestDestination port,(of a T1/E1 port), that is connected to the
DIM card, for the specified Destination number.
0 = No destination port.
Else:
For external ports:
(IO Slot+10)*10 + 1 for port 1
(IO Slot+10)*10 + 3 for port 2
Example: port2 of IO slot 12 will be: 223 .
For internal ports :
(IO Slot+10)*10 + 2 for port 1
(IO Slot+10)*10 + 4 for port 2
(IO Slot+10)*10 + 6 for port 3
(IO Slot+10)*10 + 8 for port 4, etc...rw INTEGER .1.3.6.1.4.1.164.3.3.3.5.2.1.4 |
prtDestConnectConnection Status of the specified destination number.
For a specified destination port, it depends both on the
status of the port and on the status of the far-end port.
Since this is a RO object, same value will be received for
all configurations.ro Enumeration .1.3.6.1.4.1.164.3.3.3.5.2.1.5 |
prtI OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.6 |
prtICnfgTable SEQUENCE OF PrtICnfgEntry .1.3.6.1.4.1.164.3.3.3.6.1 |
prtICnfgEntry PrtICnfgEntry .1.3.6.1.4.1.164.3.3.3.6.1.1 |
prtICnfgIdxThis attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.ro INTEGER .1.3.6.1.4.1.164.3.3.3.6.1.1.1 |
prtIIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The ISDN B1, B2, D channels will be inside ports.
For port index, see product specification.ro INTEGER .1.3.6.1.4.1.164.3.3.3.6.1.1.2 |
prtIRateThis object indicates the port rate in bits.
Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps
rate.rw Enumeration .1.3.6.1.4.1.164.3.3.3.6.1.1.3 |
prtIConnectD channel connection.
no - disconnected
yes - connected.rw Enumeration .1.3.6.1.4.1.164.3.3.3.6.1.1.4 |
prtHdsl OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.7 |
prtHdslTable SEQUENCE OF PrtHdslEntry .1.3.6.1.4.1.164.3.3.3.7.1 |
prtHdslEntry PrtHdslEntry .1.3.6.1.4.1.164.3.3.3.7.1.1 |
prtHdslIdxThis attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The HDSL ports will be external.
For port index, see product specification.ro INTEGER .1.3.6.1.4.1.164.3.3.3.7.1.1.1 |
prtHdslModeThis object indicates the HDSL mode.ro Enumeration .1.3.6.1.4.1.164.3.3.3.7.1.1.2 |
prtHdslRptrTypeThe Repeater between Near and Far modem.
none - no repeater exists between the modems
hrpt - HRPT repeater exists between the modems.ro Enumeration .1.3.6.1.4.1.164.3.3.3.7.1.1.3 |
prtT3E3 OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.3.8 |
prtT3E3CnfgTableT3/E3 port configuration table. SEQUENCE OF PrtT3E3CnfgEntry .1.3.6.1.4.1.164.3.3.3.8.1 |
prtT3E3CnfgEntryAn entry in the T3/E3 port configuration table. PrtT3E3CnfgEntry .1.3.6.1.4.1.164.3.3.3.8.1.1 |
prtT3E3CnfgIdxThis attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
Write operations can be performed only on the Temp Config.ro INTEGER .1.3.6.1.4.1.164.3.3.3.8.1.1.1 |
prtT3E3PrtIdxThis attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The external ports convention used will be (for DXC):
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .ro INTEGER .1.3.6.1.4.1.164.3.3.3.8.1.1.2 |
prtT3E3SltThis attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.3.8.1.1.3 |
prtT3E3LineLengthThis object is the length of the ds3 line in feet.
It provides information for line build out circuitry if it exists
and can use this object to adjust the line build out.
len0p450ft = 0 - 450 feet
len451p900ft = 451 - 900 feet.rw Enumeration .1.3.6.1.4.1.164.3.3.3.8.1.1.4 |
prtT3E3InbandMngA unique number to identify the Frame Type over the link.rw Enumeration .1.3.6.1.4.1.164.3.3.3.8.1.1.5 |
genDacsMux OBJECT IDENTIFIER .1.3.6.1.4.1.164.3.3.4 |
cmprTable SEQUENCE OF CmprEntry .1.3.6.1.4.1.164.3.3.4.1 |
cmprEntry CmprEntry .1.3.6.1.4.1.164.3.3.4.1.1 |
cmprTypeIdxThis object indicates the Type of the Compressed
data referred (which table, which level, etc).
The type is a code according to a convention between
agent and NMS.ro INTEGER .1.3.6.1.4.1.164.3.3.4.1.1.1 |
cmprCnfgIdxThis object indicates the configuration number the
Compressed information relates to.ro INTEGER .1.3.6.1.4.1.164.3.3.4.1.1.2 |
cmprVersionThis object indicates the version of the internal format of
the Compressed data (the version of the convention used).ro INTEGER .1.3.6.1.4.1.164.3.3.4.1.1.3 |
cmprSltIdxThis attribute indicates a unique number of the slot
position where the card is inserted.
When the unit is stand-alone or this object is not applicable,
255 will be used.ro Enumeration .1.3.6.1.4.1.164.3.3.4.1.1.4 |
cmprPrtIdxThis object indicates a unique identifier of the port,
the compressed information relates to.
For DXC - according to the order in the card of cmprSltIdx:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .
For FCD: see product's specification.
If the port number is irrelevant to this parameter (if it is
a system/card level alarm) the value will be 9999.ro INTEGER .1.3.6.1.4.1.164.3.3.4.1.1.5 |
cmprObjThis object is the compressed information itself,
according to a predefined format, both agent and NMS agreed
about.rw OCTET STRING .1.3.6.1.4.1.164.3.3.4.1.1.6 |
mapLinkTable SEQUENCE OF MapLinkEntry .1.3.6.1.4.1.164.3.3.4.2 |
mapLinkEntry MapLinkEntry .1.3.6.1.4.1.164.3.3.4.2.1 |
mapLinkIdxA unique identifier of the linkro INTEGER .1.3.6.1.4.1.164.3.3.4.2.1.1 |
mapLinkSlotIdxThis attribute indicates a unique slot position where
the module is inserted.rw Enumeration .1.3.6.1.4.1.164.3.3.4.2.1.2 |
mapLinkPortIdxThis attribute indicates a unique port number.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
In the DXC :
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card in odd or even numbers, as follows:
* For the outside/external ports, in odd numbers:
port1 = 1
port2 = 3
port3 = 5
etc...
Example: port2 of IO slot 11 will be: 213 .
* The inside/internal ports, in even numbers:
port1 = 2
port2 = 4
port3 = 6
etc...
Example: port2 of IO slot 11 will be: 214 .rw INTEGER .1.3.6.1.4.1.164.3.3.4.2.1.3 |
mapLinkStateThis attribute indicates the status of the link between
the two muxesro Enumeration .1.3.6.1.4.1.164.3.3.4.2.1.4 |
alrGenTable SEQUENCE OF AlrGenEntry .1.3.6.1.4.1.164.3.3.4.3 |
alrGenEntry AlrGenEntry .1.3.6.1.4.1.164.3.3.4.3.1 |
alrGenCodeThis object is a unique code number, identifying
a certain alarm.ro INTEGER .1.3.6.1.4.1.164.3.3.4.3.1.1 |
alrGenDescriptionThis entry is a unique text description, of the alarm
corresponding to the specified code.ro DisplayString .1.3.6.1.4.1.164.3.3.4.3.1.2 |
alrGenLevelAlarm level.ro Enumeration .1.3.6.1.4.1.164.3.3.4.3.1.3 |
alrGenSlotTypeSlot type that the alarm is relevant to.
clAndIo - an alarm that is relevant for both CL and IO slots.ro Enumeration .1.3.6.1.4.1.164.3.3.4.3.1.4 |
alrGenSeverityThis object enables the user to select a severity for each alarm.
The severity is set per alarm code (same for all slots/ports
using this code).rw Enumeration .1.3.6.1.4.1.164.3.3.4.3.1.5 |
alrGenDebounceDebounce time for each alarm code, in seconds.
The meaning is, that an alarm will be 'declared' as ON (or OFF), only
after it was actually ON/OFF the Debouncing time selected by user.
0 = default debounce selection (each alarm has a default value).
1 = minimum value of seconds for debounce.
255 = mask = the alarm will Never be reported.rw INTEGER .1.3.6.1.4.1.164.3.3.4.3.1.6 |
radBridges OBJECT IDENTIFIER .1.3.6.1.4.1.164.4 |
radConverters OBJECT IDENTIFIER .1.3.6.1.4.1.164.5 |
radGen OBJECT IDENTIFIER .1.3.6.1.4.1.164.6 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1 |
tftpStatusChangeTrapThis trap is sent whenever the status of tftp changed. TRAP-TYPE .1.3.6.1.4.1.164.6.1.0.1 |
agnStatusChangeTrapThis trap is sent whenever the state of the entity the agent is
responsible for changed.
TDM devices will send agnTestStatus variable to indicate the current test status. TRAP-TYPE .1.3.6.1.4.1.164.6.1.0.2 |
prtStatusChangeTrapThis trap is sent whenever the state of a port changed.
Attached, will be parameter/s that indicate the new port status.
The attached variables will be specified in the specifications
of the products supporting this trap. TRAP-TYPE .1.3.6.1.4.1.164.6.1.0.3 |
radSysTR OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.1 |
radRADring OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.1.1 |
radTMA OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.1.2 |
radRingMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.1.3 |
radSysFddi OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.2 |
radFDX100 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.2.1 |
radSysWan OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3 |
radMP2100 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.1 |
radMP2104 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.2 |
radMP2100B OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.3 |
radMP2100F OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.4 |
radMP2100H OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.5 |
radMP2104H OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.6 |
radMP2200B OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.7 |
radMP2200F OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.8 |
radMX3000 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.9 |
radMX3004 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.10 |
radMX30 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.11 |
radMX300 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.12 |
radVOIP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.13 |
radKM2100 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.15 |
radKM2104 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.16 |
radDXC30 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.20 |
radDXC10A OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.21 |
radDXC8R OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.22 |
radDXC30E OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.23 |
radFcdT1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.30 |
radFcdE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.31 |
radFcdE1I OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.32 |
radFcdT1M OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.33 |
radFcdE1M OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.34 |
radFcdIP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.35 |
radFcdT1A OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.36 |
radFcdE1A OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.37 |
radFcdW OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.38 |
radHtuE1Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.40 |
radHtuE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.41 |
radHtu2Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.42 |
radHtu2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.43 |
radAsmi450R768Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.44 |
radAsmi450R768 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.45 |
radAsmi450R1152Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.46 |
radAsmi450R1152 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.47 |
radLrs12F OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.48 |
radLrs12B OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.49 |
radHcdE1Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.51 |
radHcdE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.52 |
radHtuT1Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.53 |
radHtuT1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.54 |
radOptimux4E1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.55 |
radOptimux4T1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.56 |
radOptimuxXLE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.57 |
radOptimuxXLT1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.58 |
radOptimuxXL16E1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.59 |
radImx64 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.60 |
radImx6L OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.61 |
radImx2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.62 |
radImx4T1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.63 |
radImx4E1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.64 |
radImx2T1E1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.65 |
radHtuE1SaV2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.70 |
radHtuE1V2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.71 |
radFomiE3 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.72 |
radFomiT3 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.73 |
radOpt4E1C OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.74 |
radOpt4T1C OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.75 |
radPrbiE3 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.76 |
radPrbiT3 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.77 |
radHcd4Sa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.78 |
radFRmon OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.3.80 |
radSysBRG OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4 |
radTRE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.1 |
radTRE1D OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.2 |
radTRE8 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.3 |
radTRE8D OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.4 |
radMBE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.5 |
radMBE1D OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.6 |
radMBE8 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.7 |
radMBE8D OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.8 |
radMLBT OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.9 |
radFEB4DAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.10 |
radTrimBrg10 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.11 |
radTrimBrg16 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.12 |
radRRTRE8 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.13 |
radRRTRE8D OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.14 |
radRRMLBT OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.15 |
radRRMLBTF OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.16 |
radRRTRE1D OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.17 |
radTRERAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.18 |
radTRERASa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.19 |
radMBERAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.20 |
radMBERASa OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.21 |
radFEB4FDX OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.22 |
radFEB4SAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.23 |
radRRFTBDAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.24 |
radRRFTBSAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.25 |
radFTBDAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.26 |
radFTBSAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.27 |
radFastWay100 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.4.28 |
radSysCnvrtr OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5 |
radSTC1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.1 |
radSTC2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.3 |
radSTC1UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.4 |
radSTC2UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.6 |
radFTC1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.10 |
radFTC2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.12 |
radFTC1UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.13 |
radFTC2UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.15 |
radSEC1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.20 |
radSEC2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.22 |
radSEC1UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.23 |
radSEC2UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.25 |
radFEC1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.30 |
radFEC2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.32 |
radFEC1UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.33 |
radFEC2UDP OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.5.35 |
radSysStkHub OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7 |
radRBHE OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.1 |
radRBHT OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.2 |
radETS4fddiDAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.3 |
radETS4fddiSAS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.4 |
radSAHEMX OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.5 |
radSAHTM OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.6 |
radETS4 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.7 |
radSAHEMU OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.8 |
unknown OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.9 |
radSAH16Eint OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.10 |
radSAH16Tint OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.11 |
radSAH16Eext OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.12 |
radSAH16Text OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.7.13 |
radSysPS OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8 |
radSPS2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.1 |
radSPS3 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.2 |
radSPS6 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.3 |
radSPS9 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.4 |
radSPS12 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.5 |
radAPD2 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.6 |
radAPD8 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.7 |
radAPS8 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.8 |
radAPS16 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.9 |
radAPS24 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.10 |
radSPS3S OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.11 |
radFPS8 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.12 |
radFPS12 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.13 |
radSPS3ScSL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.14 |
radSPS3Sc2S OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.15 |
radFPS8c OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.16 |
radFPS4 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.8.17 |
radSysEth OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9 |
radEP8T OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.1 |
radEP4TAUI OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.2 |
radEP4T2FL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.3 |
radEP4TFL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.4 |
radEP4FL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.5 |
radEPR8T OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.7 |
radEPR4TAUI OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.8 |
radEPR4T2FL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.9 |
radEPR4TFL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.10 |
radEPR4FL OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.9.11 |
radSysRtr OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.11 |
radRTED OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.11.1 |
radRTEM OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.11.2 |
radRTEC OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.11.3 |
radWebRanger OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.11.4 |
radTinyRouter OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.11.5 |
radSysAtm OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12 |
radStarSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.1 |
radStarSwitchATM25 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.1.1 |
radStarSwitchATM25L OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.1.2 |
radStarSwitchATM155 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.1.3 |
radAtmCsuDsu OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2 |
radAmcdE1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.1 |
radAmcdT1 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.2 |
radAce20E OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.3 |
radAce20T OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.4 |
radAce2005 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.5 |
radAce2002 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.6 |
radAce2E OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.8 |
radAce2T OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.2.9 |
radAce OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.3 |
radAce101 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.3.1 |
radAce102 OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.1.12.3.2 |
agnt OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2 |
agnHwVersionASCII string for description and display of the agent hardware version,
as it is known by the agent software.The user can update the version
upon request when he changes components in the agent's modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.6.2.1 |
agnTrapMaskThe value of this attribute determines the type of traps the
agent should mask and not send to the management console. The
value is differently determined for different products. There are
mainly two methods:
- an integer number, specifying the traps' severity.
- a sum of 2**n, where n is a bit assigned to a certain
masked trap group.
User should consult the product specification, to find out
the method employed.rw INTEGER .1.3.6.1.4.1.164.6.2.2 |
agnTrapValueThe value of the trap decoded in internal RAD format. Full description is given
in the Trap definition filerodeprecated OCTET STRING .1.3.6.1.4.1.164.6.2.3 |
agnChangeCntThe number of changes in system configuration that were reported to the
manager since last cold startro Counter .1.3.6.1.4.1.164.6.2.4 |
agnSpecificObject identifier of entity containing additional information
regarding this instance.ro OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.5 |
agnConfigMsgFull configuration message coded in internal RAD application format.
This entry describes agent's configuration.
For MP-2200 R3, this object describes agent's support of the V5.1
feature: 1 octet ; bit 0 (LSB).
'1' - V5.1 feature is supported
'0' - V5.1 feature is not supported.ro OCTET STRING .1.3.6.1.4.1.164.6.2.6 |
mngTrapIpTableThis table indicates the destination address of the traps.
Internally it will be limited to ten addresses. SEQUENCE OF MngEntry .1.3.6.1.4.1.164.6.2.7 |
mngEntry MngEntry .1.3.6.1.4.1.164.6.2.7.1 |
mngIDThis value indicates an index of a specific IP addressro INTEGER .1.3.6.1.4.1.164.6.2.7.1.1 |
mngIPThis value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.rw IpAddress .1.3.6.1.4.1.164.6.2.7.1.2 |
mngIPMaskThis value indicates the mask of the destination addresses of the traps.rwdeprecated IpAddress .1.3.6.1.4.1.164.6.2.7.1.3 |
mngTrapMaskThe value of this attribute determines the type of traps the
agent should mask and not send to this NMS. The
value is differently determined for different products. There are
mainly two methods:
- an integer number, specifying the traps' severity.
- a sum of 2**n, where n is a bit assigned to a certain
masked trap group.
User should consult the product specification, to find out
the method employed.rw INTEGER .1.3.6.1.4.1.164.6.2.7.1.4 |
agnIndicationAttribute describing the state of the entity the agent is responsible for.
In case of a modular entity, the value of this attribute will be according
to the component which is in the worst state.
The order of severity (from top to bottom) is:
faulty (critical)-> major-> minor-> warning-> event-> normal (off).ro Enumeration .1.3.6.1.4.1.164.6.2.8 |
agnMonitorModeCmdSetting this attribute to ON, will enforce the agent to change its mode of operation to
Monitor Moderw Enumeration .1.3.6.1.4.1.164.6.2.9 |
agnLedThis entry specifies the LEDs status of the agent module . Each led will be represented by 4
bits where the first 2 bits (left) will specify the status :
(00=NA, 01=OFF, 10=ON, 11=BLINK),
and the next two bits (right) will specify the color :
(00=GREEN, 01=RED, 10=YELLOW, 11=ORANGE)ro OCTET STRING .1.3.6.1.4.1.164.6.2.10 |
trapTableThis table includes the last few traps generated by the agent, for future retrieval. The table
has a limited capacity. If traps are not retrieved in proper time, they will be
over-written by new traps SEQUENCE OF TrapEntry .1.3.6.1.4.1.164.6.2.11 |
trapEntry TrapEntry .1.3.6.1.4.1.164.6.2.11.1 |
trapIDThis value indicates an index of a specific trapro INTEGER .1.3.6.1.4.1.164.6.2.11.1.1 |
trapValThis value is the actual ASCII description of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.6.2.11.1.2 |
trapTimeSinceOccurrenceThis value indicates the amount of time passed since the occurrence of the event that
trigger this trap.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.164.6.2.11.1.3 |
fileTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.12 |
fileServerIPThe IP address of the server from which the file is loadedrw IpAddress .1.3.6.1.4.1.164.6.2.12.1 |
fileNameThe name of the file to be loaded. For protection, read returns
NULL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.6.2.12.2 |
fileTransCmdThe command to be executed on fileName at fileServerIP.rw Enumeration .1.3.6.1.4.1.164.6.2.12.3 |
tftpRetryTimeOutGeneral Retransmission time-out value (seconds)rw INTEGER .1.3.6.1.4.1.164.6.2.12.4 |
tftpTotalTimeOutTotal Retransmission time-out value (seconds)rw INTEGER .1.3.6.1.4.1.164.6.2.12.5 |
tftpStatusStatus of tftp session. When a session ended with success,
the tftpStatus should be endedOk(6). Before restarting a
tftp session, the NMS should set the tftpStatus to noOp(2).
That's the reason of ACCESS read-write to this field.rw Enumeration .1.3.6.1.4.1.164.6.2.12.6 |
tftpErrorThe MSB represents the standard error code.
The LSB represents the private error code.
0x0000 is No Error
0x0100 is File Not Found
0x0400 is Illegal TFTP operation
0x0500 is Unknown transfer ID
0x0001 is Server Overflow
0x0002 is No empty UDP port
0x0003 is No empty connection
0x0004 is Illegal File Mode
0x0007 is Illegal PDU sizero OCTET STRING ( SIZE(2) ) .1.3.6.1.4.1.164.6.2.12.7 |
fileTransferToSubSystemsThis object represents the sub-systems the fileTransCmd
refers to. It should be used when a system is divided
to sub-systems and each sub-system (or part of them) can
have a different SW/Configuration.
Each bit of this object will represent one of the sub-systems.
Bit='1' - APPLY to respective sub-system
Bit='0' - DO NOT APPLY to respective sub-system
For the meaning of each bit, see product's specification.
User will select the sub-systems envolved by filling-in the bits
that represent these sub-systems.
In this case, the file represented by 'fileName' will
include several parts, each representing one of the sub-systems.
The agent will refer only to the part/s indicated by this object.
0 Octet Strings = not applicable
DEFVAL = 0h for the products that support this object.rw OCTET STRING .1.3.6.1.4.1.164.6.2.12.8 |
fileNameWithinProductThe file name used by the product within the product file system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.6.2.12.9 |
systemResetReset action to be performed on the system.rw Enumeration .1.3.6.1.4.1.164.6.2.13 |
systemTiming OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.14 |
systemDateSystem date.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.6.2.14.1 |
systemTimeSystem time.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.164.6.2.14.2 |
systemPort OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.15 |
physicalConnectorTableThis table includes the connector type of ports or interfaces. SEQUENCE OF PhysicalConnectorEntry .1.3.6.1.4.1.164.6.2.15.1 |
physicalConnectorEntry PhysicalConnectorEntry .1.3.6.1.4.1.164.6.2.15.1.1 |
portIdxThis object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.ro INTEGER .1.3.6.1.4.1.164.6.2.15.1.1.1 |
physicalConnectorThe connector of the port/interface.
other - none of the specified connectors
none - no connector.ro Enumeration .1.3.6.1.4.1.164.6.2.15.1.1.2 |
portOptWaveLengthWave Length of an Optical interface/port in [nm] and specification if
Laser or not.
notApplicable - for non-optical ports.ro Enumeration .1.3.6.1.4.1.164.6.2.15.1.1.3 |
prtSupervisory OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.15.2 |
prtSpTable SEQUENCE OF PrtSpEntry .1.3.6.1.4.1.164.6.2.15.2.1 |
prtSpEntrySupervisory port parameter table. PrtSpEntry .1.3.6.1.4.1.164.6.2.15.2.1.1 |
prtSupervisoryIndexThe SP port index.
The LS byte of the integer is the port index 1..255.
The MS byte is different than 0 only if the port belongs to
a module. In that case it is the module number.ro INTEGER .1.3.6.1.4.1.164.6.2.15.2.1.1.1 |
prtSupervisoryRateThis attribute indicates the operation rate (speed) of the
port.
auto - automatic rate selection, by the agent.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.2 |
prtSupervisoryDataBitsThis attribute indicates the number of data bits in an async
framerw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.3 |
prtSupervisoryParityThis attribute indicates the parity mode in an async framerw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.4 |
prtSupervisoryStopBitsThis attribute indicates the parity mode in an async frame.ro Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.5 |
prtSupervisoryUsageThis attribute indicates the usage of the SP port.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.6 |
prtSupervisoryInterfaceThis attribute indicates the supervisory port interface.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.7 |
prtSupervisoryCTSCTS line state.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.8 |
prtSupervisoryDcdDelayDCD delay in msec.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.9 |
prtSupervisoryDSRDSR line state.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.10 |
prtSupervisoryRoutProtocolThis attribute indicates the routing protocol of the port.
notApplicable - for DP.rw Enumeration .1.3.6.1.4.1.164.6.2.15.2.1.1.11 |
prtPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.15.3 |
prtPerfTableThis table includes G.826 ports or interfaces. SEQUENCE OF PrtPerfEntry .1.3.6.1.4.1.164.6.2.15.3.1 |
prtPerfEntry PrtPerfEntry .1.3.6.1.4.1.164.6.2.15.3.1.1 |
prtPerfIdxThis object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.1 |
prtPerfPeriodRefThis object is an index that specifies which period of time, the next
5 objects refer to.
currentPeriod - the period since last prtPerfSaveAndResetCmd received or
since Start-up (if no prtPerfSaveAndResetCmd was received since
Start-up) until now.
lastPeriod - the period between last two commands of prtPerfSaveAndResetCmd.
- If only one command occured since Start-up: the period between
Start-up and last command.
- If no command occured since Start-up: this period will not
actually exist. In this case, he following 5 objects will be 0.ro Enumeration .1.3.6.1.4.1.164.6.2.15.3.1.1.2 |
prtPerfElapsedTimeElapsed Time in seconds.
- for prtPerfPeriodRef=currentPeriod:
The period since last prtPerfSaveAndResetCmd received or since Start-up
(if no prtPerfSaveAndResetCmd was received since Start-up) until now.
- for prtPerfPeriodRef=lastPeriod:
The value of prtPerfElapsedTime when last prtPerfSaveAndResetCmd
was received.ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.3 |
prtPerfUASNumber of Unavailable Seconds for the reference period (prtPerfPeriodRef).ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.4 |
prtPerfESNumber of Errored Seconds for the reference period (prtPerfPeriodRef).ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.5 |
prtPerfSESNumber of Severely Errored Seconds for the reference period (prtPerfPeriodRef).ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.6 |
prtPerfBBENumber of Background Block (or Frame) Errors for the reference period
(prtPerfPeriodRef).ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.7 |
prtPerfBlocksPerSecBlocks per second (or frames per second) of the port/interface indicated by
portIdx. This object is constant for a certain port/interface.
It is not affected by the prtPerfPeriodRef index.ro INTEGER .1.3.6.1.4.1.164.6.2.15.3.1.1.8 |
prtPerfTimeTagTime Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was
executed.
This object is applicable only for prtPerfPeriodRef=lastPeriod.
For prtPerfPeriodRef=currentPeriod, the value will always be 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.164.6.2.15.3.1.1.9 |
prtPerfSaveAndResetCmdA command per port/interface, to Save data of Current Period in Last Period
data-set and start a new counting period for Current Period.
This object is applicable only for prtPerfPeriodRef=currentPeriod.
Setting this object to on(3) for prtPerfPeriodRef=last, will cause the agent
to return: Bad Value response.
When setting validly this object to on(3), agent will perform the required
command and will reset automatically the value of this object to off(2).
Setting this object to off(2), will do nothing.rw Enumeration .1.3.6.1.4.1.164.6.2.15.3.1.1.10 |
prtTest OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.15.4 |
prtTestTableThis table includes test data for ports or interfaces. SEQUENCE OF PrtTestEntry .1.3.6.1.4.1.164.6.2.15.4.1 |
prtTestEntry PrtTestEntry .1.3.6.1.4.1.164.6.2.15.4.1.1 |
prtTestIdxThis object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.ro INTEGER .1.3.6.1.4.1.164.6.2.15.4.1.1.1 |
prtTestCmdAndStatusSetting this object to a value as detailed furter on
(except 0) will initiate a test on the specific port.
The test/s requested will be set according to the respective
bit. The value of this object will be a sum of (2**n), where n is
the Bit:
TEST BIT VALUE
-
reserved 0 1
PayloadLoop=RLB 1 (=Remote Loopback) 2
LineLoop=DIG 2 (=Digital) 4
OtherLoop 3 8
InwardLoop=LLB 4 (=Local Loopback) 16
BERT 5 32
LC 6 64
e.g : If the requested value is 20 -> 010100 ->
Bits 2 & 4 are set -> the requested tests are :
LineLoopback=DIG
InwardLoopback=LLB
Not all tests combinations are valid.
For valid test combination, see each product's specification.
The terminology and order of tests (except BERT) is according to
the one used for Test Status of DS1 and DS3 standards.
Setting this object to stop (value=0 ; all bits are 0),
will stop all the user requested tests running on the
selected port.
When no test is running on the port, the Get value (test status)
will be 0.
PayloadLoop=RLB
The received signal at this interface is looped
through the device. Typically the received signal
is looped back for retransmission after it has
passed through the device's framing function.
LineLoop=DIG
The received signal at this interface does not
go through the device (minimum penetration) but
is looped back out.
OtherLoop
Loopbacks that are not defined here.
InwardLoop=LLB
The sent signal at this interface is looped back
through the device.
LC
This loop is applicable only for HSSI interface, towards the router .rw INTEGER .1.3.6.1.4.1.164.6.2.15.4.1.1.2 |
prtBertCounterThis object indicates the number of BERT errors encountered
during the BERT operation.
It is valid only when BERT (Bit Error Rate Test) is active on the
specific port.
The Counter starts from zero (0) anytime BERT is initiated.ro INTEGER .1.3.6.1.4.1.164.6.2.15.4.1.1.3 |
prtTestInitiatorThis object indicates who initiated this port's test/s.ro Enumeration .1.3.6.1.4.1.164.6.2.15.4.1.1.4 |
prtParam OBJECT IDENTIFIER .1.3.6.1.4.1.164.6.2.15.5 |
prtParamTableThis table includes the connector type of ports or interfaces. SEQUENCE OF PrtParamEntry .1.3.6.1.4.1.164.6.2.15.5.1 |
prtParamEntry PrtParamEntry .1.3.6.1.4.1.164.6.2.15.5.1.1 |
prtParamIdxThis object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.ro INTEGER .1.3.6.1.4.1.164.6.2.15.5.1.1.1 |
prtControlCnfgThis object may be used for port RW general parameter/s.
For detailed meaning, see product's spec.
Supported by: PRBi-E3/T3.rw INTEGER .1.3.6.1.4.1.164.6.2.15.5.1.1.2 |
systemResetAllStatsCmdReset statistics of all ports and connections of the device.rw Enumeration .1.3.6.1.4.1.164.6.2.16 |
systemClearTablesCmdtempCnfgTables - Set *RowStatus = destroy for all entries of
some tables having *RowStatus object, for
temporary configuration only! (255).
For the relevant tables, see product's specification.
This object should be used by WAN product applications
before performing the Update operation, in order to clear
old entries of these tables.
off - agent will automatically change to this value, after performing the
command.rw Enumeration .1.3.6.1.4.1.164.6.2.17 |
systemParameterThis parameter can be used for different purposes:
- TELNET session time-out in seconds.
- Ace20: when trying to create row in a table that already
has row with the same values, if set of values has to be uniqe
in table, this attribute is set to the index of the existing row.rw INTEGER .1.3.6.1.4.1.164.6.2.18 |
agnGlobalAlarmMaskThe value of this attribute determines the alarm traps the
agent should mask and not send to the managers.
Each bit from a certain octet represents a certain alarm.rw OCTET STRING .1.3.6.1.4.1.164.6.2.19 |
alarmSeverityThis object specifies the severity of the alarms.ro Enumeration .1.3.6.1.4.1.164.6.2.20 |
alarmState.ro Enumeration .1.3.6.1.4.1.164.6.2.21 |
agnTestStatusIndicates the current test status (for all levels: system,
card, port).
This attribute will be set to:
on(3): when there is at least one test in progress on the
system/card/port
off(2): when there is NO test in progress on the
system/card/portro Enumeration .1.3.6.1.4.1.164.6.2.22 |
systemSaveAndResetAllStatsCmdon - a command to Save data of Current Period in Last Period
data-set and start a new counting period for Current Period.
off - agent will automatically change to this value, after performing the
command.rw Enumeration .1.3.6.1.4.1.164.6.2.23 |
systemDefaultGatewayDefault Gateway's IP Address.rw IpAddress .1.3.6.1.4.1.164.6.2.24 |
systemPsTableThis table describes the PS types of a device.
Usage of this table is specified in the device's NMS SRS SEQUENCE OF SystemPsEntry .1.3.6.1.4.1.164.6.2.25 |
systemPsEntry SystemPsEntry .1.3.6.1.4.1.164.6.2.25.1 |
systemPsIndex1First Index.
In HUBs:
1 = PS-A slot
2 = PS-B slot.
In SA units:
1 = PS1
2 = PS2
Default = 1ro INTEGER .1.3.6.1.4.1.164.6.2.25.1.1 |
systemPsIndex2Second Index.
In HUBs:
1 always.
In SA units:
1 = Local
2 = Remote
Default = 1.ro INTEGER .1.3.6.1.4.1.164.6.2.25.1.2 |
systemPsTypeThe type of PS, for a stand-alone product.
acDc - AC with rj45 DC.ro Enumeration .1.3.6.1.4.1.164.6.2.25.1.3 |
radStkHub OBJECT IDENTIFIER .1.3.6.1.4.1.164.7 |