D3I-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for D3I-MIB.
58
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
d3i OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.43 |
d3iID OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.43.1 |
d3iIDTableThis table contains an entry for each of the manageable DS3
Ingress Cards in the chassis. It contains objects that
reflect the current configuration of parameters that affect
the operation of all the entities that reside on the given
card. SEQUENCE OF D3iIDEntry .1.3.6.1.4.1.429.1.43.1.1 |
d3iIDEntryThere is one Identification table entry per DS3 Card in the
chassis. D3iIDEntry .1.3.6.1.4.1.429.1.43.1.1.1 |
d3iIDIndexA unique value for each card in the chassis. The value of
d3iIdIndex matches the value of the index for the
corresponding card entity in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.43.1.1.1.1 |
d3iIDNACHardwareSerNumThis object contains DS3 NAC module hardware serial number
as stored in EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.43.1.1.1.2 |
d3iIDNICHardwareSerNumThis object contains DS3 NIC module hardware serial number
as stored in EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.43.1.1.1.3 |
d3iIDNACHardwareRevThis object contains DS3 NAC module hardware revision as
stored in EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.43.1.1.1.4 |
d3iIDNICHardwareRevThis object contains DS3 NIC module hardware revision as
stored in EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.43.1.1.1.5 |
d3iIDBoardManagerSwRevThis object contains revision of the software being
executed by the DS3 NAC board manager processor.ro DisplayString .1.3.6.1.4.1.429.1.43.1.1.1.6 |
d3iIDBoardManagerDateThis object contains board manager build date.ro DisplayString .1.3.6.1.4.1.429.1.43.1.1.1.7 |
d3iCfg OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.43.2 |
d3iCfgTableThis table contains an entry for each of the manageable DS3
Ingress Cards in the chassis. It contains objects that
reflect the current configuration of parameters that affect
the operation of all the entities that reside on the given
card. SEQUENCE OF D3iCfgEntry .1.3.6.1.4.1.429.1.43.2.1 |
d3iCfgEntryThere is one Configuration table entry per DS3 Card in the
chassis. D3iCfgEntry .1.3.6.1.4.1.429.1.43.2.1.1 |
d3iCfgIndexA unique value for each card in the chassis. The value of
d3iCfgIndex matches the value of the index for the
corresponding card entity in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.43.2.1.1.1 |
d3iCfgPrimaryTimeSourceThis object contains Designation of primary system clock
timing reference source.rw Enumeration .1.3.6.1.4.1.429.1.43.2.1.1.2 |
d3iCfgSecondaryTimeSourceThis object contains Designation of secondary system clock
timing reference source.rw Enumeration .1.3.6.1.4.1.429.1.43.2.1.1.3 |
d3iCfgTimeSourceSwitchModeIf a clock failure occurs on the currently active clock
timing reference, this object specifies whether the
switchover to the backup reference will be performed
automatically or manually.rw Enumeration .1.3.6.1.4.1.429.1.43.2.1.1.4 |
d3iCfgCLIPromptNameThis object is used to identify DS3 module's console prompt
name.rw DisplayString .1.3.6.1.4.1.429.1.43.2.1.1.5 |
d3iStat OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.43.3 |
d3iStatTableThe Status table contains an entry for each DS3 card in the
chassis. SEQUENCE OF D3iStatEntry .1.3.6.1.4.1.429.1.43.3.1 |
d3iStatEntryThere is one entry for each DS3 card in the chassis. D3iStatEntry .1.3.6.1.4.1.429.1.43.3.1.1 |
d3iStatIndexA unique value for each DS3 card in the chassis. The value
of this object matches the value of the index of the
corresponding DS3 card's entry in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.43.3.1.1.1 |
d3iStatSigPBusTxPktOkCntThe number of successful packets transmitted over the
signaling packet bus connection.ro Counter .1.3.6.1.4.1.429.1.43.3.1.1.2 |
d3iStatSigPBusTxPktFldCntThe number of packets failed to transmit over the signaling
packet bus connection.ro Counter .1.3.6.1.4.1.429.1.43.3.1.1.3 |
d3iStatSigPBusRxPktOkCntThe number of successful packets received over the
signaling packet bus connection.ro Counter .1.3.6.1.4.1.429.1.43.3.1.1.4 |
d3iStatSigPBusRxPktRjtCntThe number of packets rejected by the DS3 NAC module
message handling application.ro Counter .1.3.6.1.4.1.429.1.43.3.1.1.5 |
d3iStatSigPBusConnStateThe state of the signaling packet bus connection to the
JHDM NAC. The loopback state means the DS3 has been
requested, over the signaling packet bus link, to loopback
all of its signaling channel received data. It will stay in
this state until the DS3 sends an call control message to
remove the loopback on this signaling connection.ro Enumeration .1.3.6.1.4.1.429.1.43.3.1.1.6 |
d3iStatEnfasLinkDownCauseThe reason for the E-NFAS signaling link going down.
DisCmd: A DISC command was received over the packet bus
signaling link. NACRemoval: A chassis awareness message
indicated that the NAC connected to the E-NFAS link has
been removed.ro Enumeration .1.3.6.1.4.1.429.1.43.3.1.1.7 |
d3iStatPbClockThis object defines the current status of the packet bus
clock.ro Enumeration .1.3.6.1.4.1.429.1.43.3.1.1.8 |
d3iStatTdmClockThis object defines the current status of the TDM bus
system clock.ro Enumeration .1.3.6.1.4.1.429.1.43.3.1.1.9 |
d3iCmd OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.43.4 |
d3iCmdTableThe DS3 card command table contains an entry for each of
the manageable DS3 card in the chassis. It provides a
means through which to take specific actions on the DS3
card in the chassis. SEQUENCE OF D3iCmdEntry .1.3.6.1.4.1.429.1.43.4.1 |
d3iCmdEntryThere is one DS3 card command entry per DS3 card in the
chassis. D3iCmdEntry .1.3.6.1.4.1.429.1.43.4.1.1 |
d3iCmdIndexA unique value for each DS3 card in the chassis. The value
of this object matches the value of the index of the
corresponding DS3 card's entry in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.43.4.1.1.1 |
d3iCmdMgtStationIdThis object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a command are the results of a command issued
by that specific MS. Each MS must SET a unique value to
this object when doing commands and GET the value of this
object together with d3iCmdReqId and d3iCmdResult to detect
interference from other MSs.rw OCTET STRING .1.3.6.1.4.1.429.1.43.4.1.1.2 |
d3iCmdReqIdThis object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command or test on this DS3 card. If the request-id is
unknown or undefined, this object contains the value zero.ro INTEGER .1.3.6.1.4.1.429.1.43.4.1.1.3 |
d3iCmdFunctionThis object contains a value which describes the command
which is being invoked.rw Enumeration .1.3.6.1.4.1.429.1.43.4.1.1.4 |
d3iCmdForceIn some cases the DS3 card may be in a state such that
certain commands could adversely affect connections. In
such cases, a command request with this object not present
or set to noForce will result in a warning. If the
operator elects to ignore such warnings, this object can be
set to force in a subsequent issue of the command to cause
the command to be carried out regardless of its potentially
hazzardous effects.rw Enumeration .1.3.6.1.4.1.429.1.43.4.1.1.5 |
d3iCmdParamThis object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no addtional parameters required.rw OCTET STRING .1.3.6.1.4.1.429.1.43.4.1.1.6 |
d3iCmdResultThis object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since the last reset.ro Enumeration .1.3.6.1.4.1.429.1.43.4.1.1.7 |
d3iCmdCodeThe value of this object upon commad completion indicates a
futher description of what went wrong if the command was
unsuccessful. In the case of tests, a bit mapped result of
each of the sub-tests performed can be found in the status
table.ro Enumeration .1.3.6.1.4.1.429.1.43.4.1.1.8 |
d3iTe OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.43.5 |
d3iTeTableThe trap table containing an enable for each that the card
is capable of generating. Some of these events occur often
and traps may flood the network if care is not taken to
avoid such conditions. These traps should be enabled
sparingly. SEQUENCE OF D3iTeEntry .1.3.6.1.4.1.429.1.43.5.1 |
d3iTeEntryThere is one entry for each DS3 card in the chassis. D3iTeEntry .1.3.6.1.4.1.429.1.43.5.1.1 |
d3iTeIndexA unique value for each DS3 card in the chassis. The value
of this object matches the value of the index of the
corresponding DS3 card's entry in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.43.5.1.1.1 |
d3iTePbActiveEnables the Packet Bus Active Trap. Default is
disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.2 |
d3iTePbLostEnables the Packet Bus lost Trap. Default is
disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.3 |
d3iTePbClockLossEventThis object is used to disable the ability for a NAC to
report when the packet bus clock has been lost. Defaule is
diableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.4 |
d3iTePbClockRestoreEventThis object is used to disable the ability for a NAC to
report when the packet bus clock has been restored. Defaule
is diableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.5 |
d3iTeTdmClockLostEnables generation of an SNMP trap upon detection of TDM
bus system clock lost. Default is disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.6 |
d3iTeTdmClockRestoredEnables generation of an SNMP trap upon detection of TDM
bus system clock restored. Default is disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.7 |
d3iTeEnfasLinkUpThe trap enable for ENFAS link coming up trap. Default is
disable.rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.8 |
d3iTeEnfasLinkDownThe trap enable for ENFAS link coming down trap. Default is
disable.rw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.9 |
d3iTeSystemResetThe trap enable disable for the DS3 system resetrw Enumeration .1.3.6.1.4.1.429.1.43.5.1.1.10 |