CYCLADES-ACS5K-CONF-MIB
AI MIB Summary
The CYCLADES-ACS5K-CONF-MIB provides SNMP-based configuration management for Cyclades ACS5000 asynchronous console servers, enabling remote retrieval and modification of device parameters such as port settings, access control lists, and system operational states.
Configuration of ACS5000 products
Main OID:
cyACS5KConf.1.3.6.1.4.1.2925.8.2
109
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
109 total| Object Name |
|---|
cyACS5KConfConfiguration of ACS5000 products MODULE-IDENTITY .1.3.6.1.4.1.2925.8.2 |
cyHostNameThe Host Namerw DisplayString .1.3.6.1.4.1.2925.8.2.1 |
cyConsoleBannerThe console bannerrw DisplayString .1.3.6.1.4.1.2925.8.2.2 |
cyMotdThe motd messagerw DisplayString .1.3.6.1.4.1.2925.8.2.3 |
cyEthItfThe configuration of the Ethernet Interface OBJECT IDENTIFIER .1.3.6.1.4.1.2925.8.2.4 |
cyEthDhcpcThe ACS can request all of its ethernet parameters to a DHCP serverrw Enumeration .1.3.6.1.4.1.2925.8.2.4.1 |
cyEthIPaddrThis is the IP address of the Ethernet Interfacerw IpAddress .1.3.6.1.4.1.2925.8.2.4.2 |
cyEthIPmaskThe mask fot the Ethernet networkrw IpAddress .1.3.6.1.4.1.2925.8.2.4.3 |
cyEthMTUThe Maximum Transmission Unit size, wich determines whether or not packets should be broken uprw Integer32 .1.3.6.1.4.1.2925.8.2.4.4 |
cyEthIPaddr2The Ethernet secondary IP addressrw IpAddress .1.3.6.1.4.1.2925.8.2.4.5 |
cyEthIPmask2The Ethernet secondary IP maskrw IpAddress .1.3.6.1.4.1.2925.8.2.4.6 |
cyEnableIPv4This parameter is used to enable or disable the configuration of IPv4 addressesrw Enumeration .1.3.6.1.4.1.2925.8.2.4.7 |
cyEnableIPv6This parameter is used to enable or disable the configuration of IPv6 addressesrw Enumeration .1.3.6.1.4.1.2925.8.2.4.8 |
cyIPv6MethodIPv6 configuration methodrw Enumeration .1.3.6.1.4.1.2925.8.2.4.9 |
cyDHCPv6OptsDHCP options for IPv6rw Enumeration .1.3.6.1.4.1.2925.8.2.4.10 |
cyEthIPaddr6This is the IPv6 address of the Ethernet Interfacerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2925.8.2.4.11 |
cyEthPrefix6IPv6 network prefix length of the Ethernet Interfacerw Integer32 .1.3.6.1.4.1.2925.8.2.4.12 |
cyNameServiceThe Name Service configuration OBJECT IDENTIFIER .1.3.6.1.4.1.2925.8.2.5 |
cyResolverOrderIt specifies how host lookups are to be performed. Valid values : empty, 'hosts', 'bind', 'hosts, bind', 'bind, hosts'rw DisplayString .1.3.6.1.4.1.2925.8.2.5.1 |
cyMultipleIPValid values are ON or OFF. If set to ON, the resolve library will return all valid addresses for a host that appears in the /etc/hosts file, instead of only the first.rw DisplayString .1.3.6.1.4.1.2925.8.2.5.2 |
cyDNSservThe DNS server configuration OBJECT IDENTIFIER .1.3.6.1.4.1.2925.8.2.5.3 |
cyDNSpriservInternet Address (in dot notation) of primary name server that the resolver should query.rw DisplayString .1.3.6.1.4.1.2925.8.2.5.3.1 |
cyDNSsecservInternet Address (in dot notation) of secondary name server that the resolver should query.rw DisplayString .1.3.6.1.4.1.2925.8.2.5.3.2 |
cyDNSdomainLocal domain name .rw DisplayString .1.3.6.1.4.1.2925.8.2.5.3.3 |
cySerialPortConfThe PortSlave configuration - pslave.conf file. It configures the all serial ports. OBJECT IDENTIFIER .1.3.6.1.4.1.2925.8.2.6 |
cySerialGlobalThese parameters have the prefix conf. in the pslave.conf file OBJECT IDENTIFIER .1.3.6.1.4.1.2925.8.2.6.1 |
cySerialIncludeFile used in centralized management.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.1 |
cySerialNFSRemote Network File System where data buffering will be written instead of the default directory '/var/run/DB'.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.2 |
cySerialLockDirThe lock directory for the ACS.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.3 |
cySerialRloginLocation of the rlogin binary that accepts the -i flag.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.4 |
cySerialPppdLocation of the pppd binary.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.5 |
cySerialTelnetLocation of the telnet applicationrw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.6 |
cySerialSshLocation of the ssh applicationrw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.7 |
cySerialLocalLoginsThis parameter is only necessary when authentication is being performed for a port. This is useful if the Radius authentication server is down.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.1.8 |
cySerialFacilityThis value (0-7) is the Local facility sent to the syslog daemon.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.1.9 |
cySerialDBFacilityThis value (0-7) is the Local facility sent to the syslog daemon with the data when .rw Integer32 .1.3.6.1.4.1.2925.8.2.6.1.10 |
cySerialGroupTableThis associates group name and its users SEQUENCE OF CyGroupEntry .1.3.6.1.4.1.2925.8.2.6.1.11 |
cygroupEntryOne particular association between group name and its users CyGroupEntry .1.3.6.1.4.1.2925.8.2.6.1.11.1 |
cyGroupIndexnumber to identifier the groupro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2925.8.2.6.1.11.1.1 |
cyGroupNameThe Group Namerw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.11.1.2 |
cyGroupUsersThe users namesrw DisplayString .1.3.6.1.4.1.2925.8.2.6.1.11.1.3 |
cySerialSpecThese parameters have the prefix all. or sxx. in the pslave.conf file OBJECT IDENTIFIER .1.3.6.1.4.1.2925.8.2.6.2 |
cySerialPortTableThis is the specific configuration to serial port SEQUENCE OF CySPortEntry .1.3.6.1.4.1.2925.8.2.6.2.1 |
cysportEntryOne particular serial port configuration CySPortEntry .1.3.6.1.4.1.2925.8.2.6.2.1.1 |
cySPortNumbernumber to identifier the serial port. Value 0 is ALL.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2925.8.2.6.2.1.1.1 |
cySPortTtyThe device name for the serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.2 |
cySPortNameAlias name given to the server connected to the serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.3 |
cySPortSpeedThe speed for serial port.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.4 |
cySPortDataSizeThe data size for serial port.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.5 |
cySPortStopBitsThe number of stop bits for serial port.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.6 |
cySPortParityThe parity for serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.7 |
cySPortFlowCtrlThe flow control for serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.8 |
cySPortDTRdelayThis specifies how long (in miliseconds) a DTR signal will be turned off before it is turned on again.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.9 |
cySPortDCDCtrlDCD signal controls the connection request.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.10 |
cySPortLogUtmpACS update the login records in /var/run/utmp file.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.11 |
cySPortLogWtmpACS update the login records in /var/run/wtmp file.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.12 |
cySPortLogformThis is the format to write login record.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.13 |
cySPortAuthtypeAuthentication type : .rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.14 |
cySPortAuthSrv1IP address of the primary authentication server.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.15 |
cySPortAccSrv1IP address of the primary accounting server.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.16 |
cySPortAuthTmoThis is the timeout (in seconds) for authentication query to be answered.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.17 |
cySPortAuthRetrThis defines the number of times each server is tried before another is contacted.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.18 |
cySPortAuthSrv2IP address of the secondary authentication server.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.19 |
cySPortAccSrv2IP address of the secondary accounting server.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.20 |
cySPortAuthSecretThis is the shared secret with authentciation servers.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.21 |
cySPortAuthRadPTo accept Radius' user without password.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.22 |
cySPortAuthAccaccess restrition on Users.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.23 |
cySPortProtocolDefines the port serial's protocol.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.24 |
cySPortRemoteIPThis is the default IP address of the serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.25 |
cySPortSocketPortThis defines an alternative labeling system for the serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.26 |
cySPortRemHostThe IP address of the host to which the serial port will connect.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.27 |
cySPortBannerThis defines the banner.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.28 |
cySPortPromptThis defines the login prompt to the serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.29 |
cySPortTermTypeThis defines the terminal type.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.30 |
cySPortAutomUsrThis defines the automatic user.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.31 |
cySPortNetMaskThe network mask used in dial in connection.rw IpAddress .1.3.6.1.4.1.2925.8.2.6.2.1.1.32 |
cySPortPppMtuThe PPP MTU - dial in connection.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.33 |
cySPortPppMruThe PPP MRU - dial in connection.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.34 |
cySPortPppOptionsThe PPP options when ACS autodetects the PPP session .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2925.8.2.6.2.1.1.35 |
cySPortPppFoptionThe PPP forced options when the user has already been authenticated.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2925.8.2.6.2.1.1.36 |
cySPortModemChatThe initchat send to modem connected.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2925.8.2.6.2.1.1.37 |
cySPortSttyCmdthe tty settings after socket connection is established.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.38 |
cySPortSockTxDefines the delay (in miliseconds) before transmission to the Ethernet of data received through a serial port .rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.39 |
cySPortSockPollKeep-alive timer (miliseconds) to the TCP connection .rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.40 |
cySPortSockIdleThe idle timeout in seconds .rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.41 |
cySPortDBsizeMaximum size of the data buffering file.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.42 |
cySPortDBtimeTimestamp in data buffering.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.43 |
cySPortDBmodeData buffering mode : circ or linerw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.44 |
cySPortDBsyslogsize of the data buffering send to syslog.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.45 |
cySPortDBmenuMenu of the data buffering.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.46 |
cySPortDBalarmGenerating Alarms.rw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.47 |
cySPortSSHbreakBreak sequence - ssh sessionrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.48 |
cySPortSniffSessSniff session typerw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.49 |
cySPortSniffAdmList of admin users to sniff sessionrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.50 |
cySPortSniffEscEscape sequence used in sniff sessionrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.51 |
cySPortSniffMsessMultiple sniff sessionsrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.52 |
cySPortTelnetModeMode negotiated by client telnet with the serverrw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.53 |
cySPortSysBufSessSyslog Buffering at all timesrw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.54 |
cySPortLFSuppressLF suppression in socket_server sessionrw Enumeration .1.3.6.1.4.1.2925.8.2.6.2.1.1.55 |
cySPortAutoInputThis string is used to auto answer. It's the input stringrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.56 |
cySPortAutoOutputThis string is used to auto answer. It's the output stringrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.57 |
cySPortPmTypeIPDU type, when the port protocol is configured as IPDUrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.58 |
cySPortPmUsersList of users which can access the IPDU and their respective outletsrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.59 |
cySPortPmOutletList of <IPDU port>.<outlet> pairs, where the server is connectedrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.60 |
cySPortPmKeyHotkey to grant access to the Power Management from a Telnet/SSH sessionrw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.61 |
cySPortPmNOutletsNumber of outlets of the IPDUrw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.62 |
cySPortBreakIntervalThe break interval in miliseconds.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.63 |
cySPortRemoteIP6This is the default IPv6 address of the serial port.rw DisplayString .1.3.6.1.4.1.2925.8.2.6.2.1.1.64 |
cySPortPrefix6Port IP address network prefix length.rw Integer32 .1.3.6.1.4.1.2925.8.2.6.2.1.1.65 |