COMMON-GOLF-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
55
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
fore OBJECT IDENTIFIER .1.3.6.1.4.1.326 |
RFC1155-SMI Unknown .1.3.6.1.4.1.326 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.326.2 |
ethernet OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20 |
edge OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1 |
edgecommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.1 |
golf OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2 |
golfproducts OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1 |
golfcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2 |
fore-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2 |
agentMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.1 |
agentBasicInfo OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1 |
agentRuntimeSwVersionThis is a textual description for the runtime software version and
revision. If the version number is one and revision number is zero
agentRuntimeSwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.1 |
agentPromFwVersionThis is a textual description of the agent PROM firmware version
and revision. If the version number is one and revision number is
zero agentPromFwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.2 |
agentHwRevisionThis is a integer number for the hardware revision.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.3 |
agentMgmtProtocolCapabilityThe network management protocol(s) supported by this agent.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.4 |
agentMibCapabilityTableA list of MIB capability entries supported by this agent. SEQUENCE OF AgentMibCapabilityEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5 |
agentMibCapabilityEntryA MIB capability entry contains objects describing a particular MIB
supported by this agent. AgentMibCapabilityEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1 |
agentMibCapabilityIndexA list of agentMibCapabilityDescr entries.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.1 |
agentMibCapabilityDescrThe name of the MIB supported by the agent.ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.2 |
agentMibCapabilityVersionThe version of the MIB specified in this entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.3 |
agentMibCapabilityTypeThe type of the MIB specified in this entry.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.5.1.4 |
agentStatusConsoleInUseThis indicates whether console is currently in-use.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.6 |
agentStatusSaveCfgThis indicates the status of the device configuration.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each
of the following values.
proceeding(2) - the device configuration is being currently saved into the NV-RAM.
completed(3) - all of the device configuration parameters have been
saved into NV-RAM.
changed-not-save(4) - some of the device configuration parameters have
been changed but not saved into NV-RAM.
failed(5) - The process to save device configuration is failed.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.1.7 |
agentBasicConfig OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2 |
agentUpdateSourceThe source of the runtime software or configuration file to be downloaded
by the system.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.1 |
agentCfgUpdateCtrlThis object provides the user to download configuration file. The setting
will take effect when the system is restart.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.2 |
agentCfgUpdateFileThe name of the configuration file to be downloaded from the TFTP server
when agentCfgUpdateCtrl is set to enabled.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.3 |
agentSoftwareUpdateCtrlThis object provides the user to download runtime software. The setting
will take effect when the system is restart.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.4 |
agentSoftwareUdateFileThe name of the runtime software to be downloaded from the TFTP server
when agentSoftwareUpdateCtrl is set to enabled.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.5 |
agentSystemResetThis object indicates the agent system reset state. Setting this
object to no-reset(4) has no effect. Setting this object to
cold-start(2) or warm-start(3) will reset the agent. The agent
always returns no-reset(4) when this object is read.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.6 |
agentRs232PortConfigThis object indicates the RS-232C mode while device restart.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.7 |
agentOutOfBandBaudRateConfigThis object allows user to specify out_of_band baud rate. It will take effect
when the system is restart.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.8 |
agentSaveCfgAs the object is set, the current device configuration will be saved
into to NV-RAM.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.2.9 |
agentIpProtoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3 |
agentIpNumOfIfThe total number of IP interfaces supported by this agent.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.1 |
agentIpIfTableA list of IP interface entries supported by the agent. SEQUENCE OF AgentIpIfEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2 |
agentIpIfEntryAn agentIPIfEntry contains information about a particular IP
interface. AgentIpIfEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1 |
agentIpIfIndexThis object uniquely identifies the IP interface number in the
agentIpIfTable. This value should never greater than agentIpNumOfIfro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.1 |
agentIpIfAddressThe IP address of the interface.rw IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.2 |
agentIpIfNetMaskThe IP net mask for this interface.rw IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.3 |
agentIpIfDefaultRouterThe default gateway for this IP interface.rw IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.4 |
agentIpIfMacAddrThe MAC address of this IP interface. For interfaces which do not
have such an address. (e.g., a serial line), this object should
contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.5 |
agentIpIfTypeThe physical layer interface of the IP interface.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.2.1.6 |
agentIpBootServerAddrThe IP Address of the Boot Server.rw IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.3 |
agentIpGetIpFromBootpServerThis object indicates whether the agent should get its system IP address
from Bootp server at start up.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.4 |
agentIpUnauthAddrThe IP address of an unauthorized SNMP packet.ro IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.5 |
agentIpUnauthCommThe community string of an unauthorized SNMP packet.ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.6 |
agentIpLastBootServerAddrThe last IP address used by the agent as Boot server IP address.ro IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.7 |
agentIpLastIpAddrThe last IP address used by the agent as system IP address.ro IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.8 |
agentIpTrapManagerTableA list of trap managers to which SNMP traps will be sent. SEQUENCE OF AgentIpTrapManagerEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9 |
agentIpTrapManagerEntryEach entry contains the particular trap manager settings. AgentIpTrapManagerEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1 |
agentIpTrapManagerIpAddrThe IP address where SNMP traps will be destined forro IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.1 |
agentIpTrapManagerCommThe community string used to encode SNMP trap packet to be sent to the trap
manager.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.2 |
agentIpTrapManagerStatusThis object indicates whether or not the trap should be sent to
this trap manager.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.1.3.9.1.3 |