COM21-HCXVLAN-MIB
AI MIB Summary
The COM21-HCXVLAN-MIB enables SNMP-based management of VLAN configuration and status parameters on Com21 ComController hardware, specifically facilitating the monitoring of virtual LAN assignments and port mappings for the Part# 005-0025-00 device.
This is the Com21 ComController Vlan MIB module. COM21 Part# 005-0025-00
Main OID:
com21HcxVlan.1.3.6.1.4.1.1141.2.80
87
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
com21HcxVlanThis is the Com21 ComController Vlan MIB module. COM21 Part# 005-0025-00 MODULE-IDENTITY .1.3.6.1.4.1.1141.2.80 |
com21HcxVlanCtrlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.81 |
com21HcxVlanCtrlTable. SEQUENCE OF HcxVlanCtrlEntry .1.3.6.1.4.1.1141.2.81.1 |
com21HcxVlanCtrlEntry. HcxVlanCtrlEntry .1.3.6.1.4.1.1141.2.81.1.1 |
hcxVlanCtrlIdSpecifies the associated Vlan Id.ro INTEGER .1.3.6.1.4.1.1141.2.81.1.1.1 |
hcxVlanCtrlNamecontains a descriptive name for the VLAN.rw DisplayString .1.3.6.1.4.1.1141.2.81.1.1.2 |
hcxVlanShelfSpecifies the Shelf to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached torw INTEGER (1) .1.3.6.1.4.1.1141.2.81.1.1.3 |
hcxVlanSlotSpecifies the Slot to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached torw Integer32 .1.3.6.1.4.1.1141.2.81.1.1.4 |
hcxVlanCardTypeSpecifies the CardType to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached torw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.5 |
hcxVlanPortSpecifies the Port to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached torw Integer32 .1.3.6.1.4.1.1141.2.81.1.1.6 |
hcxVlanPriStatuslets the user Create a Vlan instance. If already created it lets the user Enable, Disable or Delete the Vlan. Note that the VLAN cannot be Enabled or Disabled until the attributes hcxVlanShelf, hcxVlanSlot, hcxVlanCardType and hcxVlanPort have valid values.rw Com21RowStatus .1.3.6.1.4.1.1141.2.81.1.1.7 |
hcxVlanSecStatusIndicates whether the Vlan is ONLINE or OFFLINE.ro Enumeration .1.3.6.1.4.1.1141.2.81.1.1.8 |
hcxVlanTypeSpecifies whether the Vlan is an internal Vlan or external Vlan. internal Vlan does not allow traffic to leave the Vlan or enter the Vlan. external Vlan allows traffic in both directions. default is external. Note that this attribute is not applicable to 10bT card.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.9 |
hcxVlanPeerToPeerFlagSpecifies whether STU to STU communication is allowed in the Vlan. If false, STU to STU communication is not allowed and has to go through an external router. If true direct STU to STU communication is allowed without the intervention of an external router. This attribute is not applicable to VLANs on 10bT Card and defaults to a read-only value of true. Default for 100bT/OC3 is false.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.10 |
hcxVlanMcastDnstrmRateSpecifies the downstream multicast rate associated with this Vlan. Defined in bits per second. The multicast rate is ondemand (not guaranteed if enough bandwidth is not available). 0 stops all broadcast forwarding. Default 100000. If a twoWay modem of model CP1000, CP1000A, CP1000B or CP1000C is acquired in the system or a teleRet modem is configured then the multicast rate will be dynamically lowered to not exceed 1000000. Under that condition an attempt to set the rate to greater than 1000000 will be rejected. The rate wil remain at 1000000 even if the condition clears eventually (all the modems of model CP1000, CP1000A, CP1000B or CP1000C get deacquired and no more teleRet modems are configured).rw INTEGER .1.3.6.1.4.1.1141.2.81.1.1.11 |
hcxVlanIpArpFiltEnblSpecifies whether ARP authentication filtering should be enabled on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpArpFiltEnable.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.12 |
hcxVlanIpSrcFiltEnblSpecifies whether IP source address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpSrcFiltEnable.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.13 |
hcxVlanIpDstFiltEnblSpecifies whether IP destination address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDstFiltEnable.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.14 |
hcxVlanIpBootpReqFiltEnblSpecifies whether BOOTP requests, or DHCPDISCOVER, or DHCPREQUEST, or DHCPRELEASE packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the downstream direction. Default is true. This filter cannot be controlled per ComPort.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.15 |
hcxVlanIpBootpReplyFiltEnblSpecifies whether BOOTP replies, or DHCPOFFER, or DHCPACK packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It it not applicable to 10BT card. It filters traffic in the upstream direction. Default is true. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpBootpReplyFiltEnbl.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.16 |
hcxVlanIpDhcpSnoopFiltEnblSpecifies whether DHCP snooping should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It snoops traffic in the downstream direction for DHCPACK packets, and in the upstream direction for DHCPDECLINE or DHCPRELEASE packets. Dynamic IP address assigments thus learned are stored in the valid source IP address table (com21HcxStuSrcIpAddrGroup.) Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDhcpSnoopFiltEnbl.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.17 |
hcxVlanL2SnapFiltEnblSpecifies whether SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2SnapFiltEnbl.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.18 |
hcxVlanL2NonSnapFiltEnblSpecifies whether non-SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2NonSnapFiltEnbl.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.19 |
hcxVlanL2EnetFiltEnblSpecifies whether Ethernet packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT Card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2EnetFiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.20 |
hcxVlanL2ArpIpv4FiltEnblSpecifies whether ARP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2ArpIpv4FiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.21 |
hcxVlanL2Ipv4FiltEnblSpecifies whether IPv4 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv4FiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.22 |
hcxVlanL2Ipv6FiltEnblSpecifies whether IPv6 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv6FiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.23 |
hcxVlanL2IpxFiltEnblSpecifies whether IPX packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2IpxFiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.24 |
hcxVlanL2AppletalkFiltEnblSpecifies whether AppleTalk packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2AppletalkFiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.25 |
hcxVlanL2OthersFiltEnblSpecifies whether all layer 2 packets that are none of the above (ARP, IPv4, IPv6, IPX, AppleTalk) should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2OthersFiltEnbl.rwdeprecated Enumeration .1.3.6.1.4.1.1141.2.81.1.1.26 |
hcxVlanIpNetbiosFiltEnblSpecifies whether NetBIOS-over-IP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpNetbiosFiltEnbl.rw Enumeration .1.3.6.1.4.1.1141.2.81.1.1.27 |
hcxVPNNumSpecifies the Virtual Private Network to which this Vlan belongs to. If this is not set, it defaults to 0. If a ComPort which belongs to this Vlan has to be configured to support Voice, then a VPN Number has to be defined. Default is 0.rw Integer32 .1.3.6.1.4.1.1141.2.81.1.1.28 |
hcxVlanVpiSpecifies the VPI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. Default is 0.rw INTEGER .1.3.6.1.4.1.1141.2.81.1.1.29 |
hcxVlanVciSpecifies the VCI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. If the hcxVlanVpi value is set to 0, the valid range for this attribute is 38 to 255 Default is 0.rw INTEGER .1.3.6.1.4.1.1141.2.81.1.1.30 |
hcxVlanRateSpecifies the Maximum Rate at which this Vlan can operate. This attribute is used only if the vlan is on an OC3 Port. Default is 10,000,000 bpsrw Integer32 .1.3.6.1.4.1.1141.2.81.1.1.31 |
com21HcxVlanStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.82 |
com21HcxVlanStatsTable. SEQUENCE OF HcxVlanStatsEntry .1.3.6.1.4.1.1141.2.82.1 |
com21HcxVlanStatsEntry. HcxVlanStatsEntry .1.3.6.1.4.1.1141.2.82.1.1 |
hcxVlanStatsIdIs used as an Index to read the Statistics of a given Vlan.ro INTEGER .1.3.6.1.4.1.1141.2.82.1.1.1 |
hcxVlanCurrMcastTxPktscontains the number of Multicast net packets sent downstream over the Vlan in the current 15min period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.2 |
hcxVlanCurrMcastDroppedPktscontains the number of Multicast downstream packets dropped in the current 15min period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.3 |
hcxVlanIpCurrArpFiltStatcontains the number of ARP packets from this Vlan dropped due to authentication filtering in the current 15minute collection periodro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.4 |
hcxVlanIpCurrSrcFiltStatContains the number of IP packets from this VLAN dropped due to source address filtering in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.5 |
hcxVlanIpCurrDstFiltStatContains the number of IP packets from this VLAN dropped due to destination address filtering in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.6 |
hcxVlanIpCurrBootpReqFiltStatContains the number of Bootp Req packets from this VLAN dropped due to filtering in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.7 |
hcxVlanIpCurrBootpReplyFiltStatContains the number of Bootp Reply packets from this VLAN dropped due to filtering in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.8 |
hcxVlanIpCurrDhcpSnoopFiltStatContains the number of DHCP Ack packets from this VLAN snooped due to filtering in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.9 |
hcxVlanPrevMcastTxPktscontains the number of Multicast net packets sent downstream over the Vlan in the previous 15min period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.10 |
hcxVlanPrevMcastDroppedPktscontains the number of Multicast downstream packets dropped in the previous 15min period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.11 |
hcxVlanIpPrevArpFiltStatcontains the number of ARP packets from this Vlan dropped due to authentication filtering in the previous 15minute collection periodro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.12 |
hcxVlanIpPrevSrcFiltStatContains the number of IP packets from this VLAN dropped due to source address filtering in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.13 |
hcxVlanIpPrevDstFiltStatContains the number of IP packets from this VLAN dropped due to destination address filtering in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.14 |
hcxVlanIpPrevBootpReqFiltStatContains the number of Bootp Req packets from this VLAN dropped due to filtering in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.15 |
hcxVlanIpPrevBootpReplyFiltStatContains the number of Bootp Reply packets from this VLAN dropped due to filtering in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.16 |
hcxVlanIpPrevDhcpSnoopFiltStatContains the number of DHCP Ack packets from this VLAN snooped due to filtering in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.17 |
hcxVlanClearStatsThis attribute is used to clear the all VLAN statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.2.82.1.1.18 |
hcxVlanL2CurrSnapFiltStatContains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.19 |
hcxVlanL2CurrNonSnapFiltStatContains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.20 |
hcxVlanL2CurrEnetFiltStatContains the number of Ethernet packets filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.21 |
hcxVlanL2CurrArpIpv4FiltStatContains the number of IPv4 ARP packets filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.22 |
hcxVlanL2CurrIpv4FiltStatContains the number of IPv4 packets filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.23 |
hcxVlanL2CurrIpv6FiltStatContains the number of IPv6 packets filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.24 |
hcxVlanL2CurrIpxFiltStatContains the number of IPX packets filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.25 |
hcxVlanL2CurrAppletalkFiltStatContains the number of AppleTalk packets filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.26 |
hcxVlanL2CurrOthersFiltStatContains the number of packets that are none of the above type of filters that are filtered from this VLAN in the current 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.27 |
hcxVlanIpCurrNetbiosFiltStatContains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.28 |
hcxVlanL2PrevSnapFiltStatContains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.29 |
hcxVlanL2PrevNonSnapFiltStatContains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.30 |
hcxVlanL2PrevEnetFiltStatContains the number of Ethernet packets filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.31 |
hcxVlanL2PrevArpIpv4FiltStatContains the number of IPv4 ARP packets filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.32 |
hcxVlanL2PrevIpv4FiltStatContains the number of IPv4 packets filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.33 |
hcxVlanL2PrevIpv6FiltStatContains the number of IPv6 packets filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.34 |
hcxVlanL2PrevIpxFiltStatContains the number of IPX packets filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.35 |
hcxVlanL2PrevAppletalkFiltStatContains the number of AppleTalk packets filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.36 |
hcxVlanL2PrevOthersFiltStatContains the number of packets that are none of the above type of filters that are filtered from this VLAN in the previous 15 minute collection period.rodeprecated Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.37 |
hcxVlanIpPrevNetbiosFiltStatContains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the previous 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.82.1.1.38 |
com21HcxOc3VlanStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.83 |
com21HcxOc3VlanStatsTable. SEQUENCE OF HcxOc3VlanStatsEntry .1.3.6.1.4.1.1141.2.83.1 |
com21HcxOc3VlanStatsEntry. HcxOc3VlanStatsEntry .1.3.6.1.4.1.1141.2.83.1.1 |
hcxOc3VlanStatsVlanIdSpecifies the index into this table. An entry exists for each vlan which is on the Oc3 Port.ro INTEGER .1.3.6.1.4.1.1141.2.83.1.1.1 |
hcxOc3VlanStatsCurrTxPktsSpecifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the current 15-min time period.ro Integer32 .1.3.6.1.4.1.1141.2.83.1.1.2 |
hcxOc3VlanStatsCurrRxPktsSpecifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the current 15-min time period.ro Integer32 .1.3.6.1.4.1.1141.2.83.1.1.3 |
hcxOc3VlanStatsCurrCrcPktsSpecifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the current 15-min time period.ro Integer32 .1.3.6.1.4.1.1141.2.83.1.1.4 |
hcxOc3VlanStatsPrevTxPktsSpecifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the previous 15-min time period.ro Integer32 .1.3.6.1.4.1.1141.2.83.1.1.5 |
hcxOc3VlanStatsPrevRxPktsSpecifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the previous 15-min time period.ro Integer32 .1.3.6.1.4.1.1141.2.83.1.1.6 |
hcxOc3VlanStatsPrevCrcPktsSpecifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the previous 15-min time period.ro Integer32 .1.3.6.1.4.1.1141.2.83.1.1.7 |
hcxOc3VlanStatsClearProvides the capability to clear the statistics. Clearing of Statistics is allowed only if hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.2.83.1.1.8 |