COM21-HCXETH-MIB
AI MIB Summary
The COM21-HCXETH-MIB module enables SNMP-based monitoring and management of Com21 ComController Ethernet interfaces, specifically tracking link status, traffic counters, and error statistics for the Part# 005-0025-00 hardware. This MIB facilitates the collection of standard interface metrics such as octets, packets, and discards to support network performance analysis and fault detection on Com21 cable modem termination systems.
This is the Com21 ComController Ethernet MIB module. COM21 Part# 005-0025-00
Main OID:
com21HcxEth.1.3.6.1.4.1.1141.2.40
112
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
112 total| Object Name |
|---|
com21HcxEthThis is the Com21 ComController Ethernet MIB module. COM21 Part# 005-0025-00 MODULE-IDENTITY .1.3.6.1.4.1.1141.2.40 |
com21HcxEtherUnitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.41 |
com21HcxEtherUnitTable. SEQUENCE OF HcxEtherUnitEntry .1.3.6.1.4.1.1141.2.41.1 |
com21HcxEtherUnitEntry. HcxEtherUnitEntry .1.3.6.1.4.1.1141.2.41.1.1 |
hcxEtherShelfIdcontains the associated shelf id.ro INTEGER .1.3.6.1.4.1.1141.2.41.1.1.1 |
hcxEtherSlotIdcontains associated slot id.ro Integer32 .1.3.6.1.4.1.1141.2.41.1.1.2 |
hcxEtherCardTypecontains Ethernet card type.ro Enumeration .1.3.6.1.4.1.1141.2.41.1.1.3 |
hcxEtherNoPortscontains the number of ports supported by the Ethernet card.ro INTEGER .1.3.6.1.4.1.1141.2.41.1.1.4 |
hcxEtherHardwareVersioncontains the hardware version of the Ethernet card. Will contain empty string if card has not been inserted in the slot.ro DisplayString .1.3.6.1.4.1.1141.2.41.1.1.5 |
hcxEtherBootVersioncontains the version of the Ethernet card boot ROM. Will contain empty string if card has not been inserted in the slot.ro DisplayString .1.3.6.1.4.1.1141.2.41.1.1.6 |
hcxEtherUnitPrimServStatecontains primary service state of the Ethernet Unit.ro PrimServiceState .1.3.6.1.4.1.1141.2.41.1.1.7 |
hcxEtherUnitSecServStatecontains a string defining the secondary service states of the Ethernet Unit. The substrings supported by the Ethernet Unit shall be: UNEQ - unequipped.ro DisplayString .1.3.6.1.4.1.1141.2.41.1.1.8 |
hcxEtherRestartActionThe Ethernet Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the Ethernet card to reset and download a new image.rw Enumeration .1.3.6.1.4.1.1141.2.41.1.1.9 |
hcxEtherTestStatusLedThe Ethernet Test Status LED is a read-only attribute which describes the condition of the Ethernet Test Status light emitting diode located on the Ethernet board. A value of on(1) indicates that a service effecting test is in progress and that the LED is illuminated. Will be off if no card present.ro Enumeration .1.3.6.1.4.1.1141.2.41.1.1.10 |
hcxEtherFaultStatusLedThe Ethernet Fault Status LED is a read-only attribute which describes the condition of the Ethernet Fault Status light emitting diode located on the Ethernet board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated. Will be off if no card present.ro Enumeration .1.3.6.1.4.1.1141.2.41.1.1.11 |
hcxEtherSerialNumbercontains the serial number of the Ethernet card. Will contain empty string if card has not been inserted in the slot.ro DisplayString .1.3.6.1.4.1.1141.2.41.1.1.12 |
com21HcxEtherPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.42 |
com21HcxEtherPortTable. SEQUENCE OF HcxEtherPortEntry .1.3.6.1.4.1.1141.2.42.1 |
com21HcxEtherPortEntry. HcxEtherPortEntry .1.3.6.1.4.1.1141.2.42.1.1 |
hcxEtherPortShelfIdcontains shelf in which this Ethernet port is located.ro INTEGER .1.3.6.1.4.1.1141.2.42.1.1.1 |
hcxEtherPortSlotIdcontains slot in which this Ethernet port is located.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.2 |
hcxEtherPortIdcontains Ethernet port id. Represents the port number on the card. In the case of single 10baseT or 100baseT, this value will always be 1. In the case of a quad 10baseT card, this value is in the range 1-4.ro INTEGER .1.3.6.1.4.1.1141.2.42.1.1.3 |
hcxEtherPortTypecontains type of Ethernet port.ro Enumeration .1.3.6.1.4.1.1141.2.42.1.1.4 |
hcxEtherPortServicecontains string defining the service provided by the Ethernet port (VLAN). Set by NMAPS. Default null string. CC most ensure uniqueness.rw DisplayString .1.3.6.1.4.1.1141.2.42.1.1.5 |
hcxEtherPortPrimServStatecontains primary service state of the Ethernet Unit. This state shall be effected by the hcxEtherPortState attribute.ro PrimServiceState .1.3.6.1.4.1.1141.2.42.1.1.6 |
hcxEtherPortSecServStatecontains a string defining the secondary service states of the Ethernet Unit. The substrings supported by the Ethernet Unit shall be: MT - offline, set by hcxEthernetUnitState, FAULT - hardware failure, TEST - test, UNEQ - unequipped.ro DisplayString .1.3.6.1.4.1.1141.2.42.1.1.7 |
hcxEtherMaxBandwidthThis attribute defines the maximum output payload bandwidth associated with the Ethernet port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxEtherMaxBandwidth attributes for each of the Ethernet ports does not exceed the system maximum. Note max for 10bT port is 11560. Default: 7000.rw INTEGER .1.3.6.1.4.1.1141.2.42.1.1.9 |
hcxEtherAggrDnStrmCbrRateThis attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.12 |
hcxEtherAggrDnStrmPcrRateThis attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.13 |
hcxEtherAggrUpStrmCbrRateThis attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.14 |
hcxEtherAggrUpStrmMinRateThis attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.15 |
hcxEtherAggrUpStrmMaxRateThis attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.16 |
hcxEtherAgeTimeThis attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300secs. If this set to 0, then aging is disabled.rw Integer32 .1.3.6.1.4.1.1141.2.42.1.1.17 |
hcxEtherPortConfigStateThe Ethernet Port State is an active-value. The Ethernet port will default to offline, in which case no traffic shall be passed. Default offline.rw Enumeration .1.3.6.1.4.1.1141.2.42.1.1.18 |
hcxEtherPortRestartActionThe Ethernet Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Ethernet port to reset and download a new image.rw Enumeration .1.3.6.1.4.1.1141.2.42.1.1.19 |
hcxEtherPortDiagTestActionThis attribute is used to invoke the internal Ethernet card diagnostic test. In order to activate this test, the card must be placed in the test state.rw Enumeration .1.3.6.1.4.1.1141.2.42.1.1.20 |
hcxEtherPortDiagTestResultThis attribute contains the result of the last Ethernet port diagnostic test.ro Enumeration .1.3.6.1.4.1.1141.2.42.1.1.21 |
hcxEtherPortLinkStatusLedThe Ethernet Link Status LED is a read-only attribute which describes the condition of the Ethernet Link Status light emitting diode located on the Ethernet board. A value of on(1) indicates that the link is up and active, and that the LED is illuminated. Will be off if no card present.ro Enumeration .1.3.6.1.4.1.1141.2.42.1.1.22 |
hcxEtherPortArpFiltRateNo longer supportedrwdeprecated INTEGER .1.3.6.1.4.1.1141.2.42.1.1.24 |
hcxEtherAggrActDnStrmCbrRateThis attribute specifies the aggregate of all ComPort downstream CBR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.25 |
hcxEtherAggrActDnStrmPcrRateThis attribute specifies the aggregate of all ComPort downstream PCR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.26 |
hcxEtherAggrActUpStrmCbrRateThis attribute specifies the aggregate of all ComPort upstream CBR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.27 |
hcxEtherAggrActUpStrmMinRateThis attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.28 |
hcxEtherAggrActUpStrmMaxRateThis attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.42.1.1.29 |
hcxEtherPortIpAddrIP Address associated with this ethernet port. This is a future item for telephone return support.rw IpAddress .1.3.6.1.4.1.1141.2.42.1.1.30 |
hcxEtherPortIpMaskIP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support.rw IpAddress .1.3.6.1.4.1.1141.2.42.1.1.31 |
hcxEtherPortMacAddrMAC address associated with port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.2.42.1.1.32 |
hcxEtherPortAutoNegEnableThis attribute is used for 100BaseT ports ONLY, to enable/disable Auto Negotiation Feature. Default is Auto Negotiation Enable. For 10bT ports this attribute will be read-only with a value of off.rw Enumeration .1.3.6.1.4.1.1141.2.42.1.1.33 |
hcxEtherPortSpeedSelectIf 'hcxEtherPortAutoNegEnble' is set to 'off' then the Media speed of the port is set to the value in this attribute. This attribute is valid only for 100BaseT ports - for 10bT ports this attribute shall be read-only with a value of tenMbpsHalfDuplex. Default for 100bT ports is 'hundredMbps'. An error will be returned if PortSpeed is set to 'tenMbps' and 'hcxEtherMaxBandwidth' is greater than 10 Mbpsrw Enumeration .1.3.6.1.4.1.1141.2.42.1.1.34 |
hcxEtherCurrPortStatespecifies the Media speed of the port.ro Enumeration .1.3.6.1.4.1.1141.2.42.1.1.35 |
com21HcxEtherStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.43 |
com21HcxEtherStatsTable. SEQUENCE OF HcxEtherStatsEntry .1.3.6.1.4.1.1141.2.43.1 |
com21HcxEtherStatsEntry. HcxEtherStatsEntry .1.3.6.1.4.1.1141.2.43.1.1 |
hcxEtherStatsShelfIdcontains shelf in which the associated Ethernet port is located.ro INTEGER .1.3.6.1.4.1.1141.2.43.1.1.1 |
hcxEtherStatsSlotIdcontains slot in which the associated Ethernet port is located.ro Integer32 .1.3.6.1.4.1.1141.2.43.1.1.2 |
hcxEtherStatsPortIdcontains the associated Ethernet port id.ro INTEGER .1.3.6.1.4.1.1141.2.43.1.1.3 |
hcxEtherCurrCollisionscontains the number of detected collisions in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.4 |
hcxEtherCurrRuntscontains the number of receive runt packets in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.5 |
hcxEtherCurrGruntscontains the number of received grunt packets in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.6 |
hcxEtherCurrCrcPktscontains the number of ethernet packets with CRC errors received in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.7 |
hcxEtherCurrTxPktscontains the number of ethernet packets transmitted in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.8 |
hcxEtherCurrRxPktscontains the number of ethernet packets received in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.9 |
hcxEtherPrevCollisionscontains the number of detected collisions in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.10 |
hcxEtherPrevRuntscontains the number of received runt packets in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.11 |
hcxEtherPrevGruntscontains the number of received grunt packets in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.12 |
hcxEtherPrevCrcPktscontains the number of ethernet packets received with CRC errors in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.13 |
hcxEtherPrevTxPktscontains the number of ethernet packets transmitted in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.14 |
hcxEtherPrevRxPktscontains the number of ethernet packets received in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.2.43.1.1.15 |
hcxEtherClearStatsThis attribute is used to clear all Ethernet statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.2.43.1.1.16 |
com21HcxEtherIpAddrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.44 |
com21HcxEtherIpAddrTableTBD. SEQUENCE OF HcxEtherIpAddrListEntry .1.3.6.1.4.1.1141.2.44.1 |
com21HcxEtherIpAddrEntry. HcxEtherIpAddrListEntry .1.3.6.1.4.1.1141.2.44.1.1 |
hcxEtherIpAddrShelfIdcontains shelf in which the associated Ethernet port is located.ro INTEGER .1.3.6.1.4.1.1141.2.44.1.1.1 |
hcxEtherIpAddrSlotIdcontains slot in which the associated Ethernet port is located.ro Integer32 .1.3.6.1.4.1.1141.2.44.1.1.2 |
hcxEtherIpAddrPortIdcontains the associated Ethernet port id.ro INTEGER .1.3.6.1.4.1.1141.2.44.1.1.3 |
hcxEtherIpAddrIPAddrtarget IP Address. No ComPort will be able to use this IP address in an ARP response.ro IpAddress .1.3.6.1.4.1.1141.2.44.1.1.4 |
hcxEtherIpAddrIPMaskIP mask. Default is ff.ff.ff.ff.rw IpAddress .1.3.6.1.4.1.1141.2.44.1.1.5 |
hcxEtherIpAddrIPStatusUsed to delete or create an entry.rw Com21RowStatus .1.3.6.1.4.1.1141.2.44.1.1.6 |
com21HcxEtherStuStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.45 |
com21HcxEtherStuStatsTable. SEQUENCE OF HcxEtherStuStatsEntry .1.3.6.1.4.1.1141.2.45.1 |
com21HcxEtherStuStatsEntry. HcxEtherStuStatsEntry .1.3.6.1.4.1.1141.2.45.1.1 |
hcxEtherStuStatsMacAddrContains IEEE 802 medium access control address of the ComPort device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.2.45.1.1.1 |
hcxEtherStuCurrDnstrmBytesContains the number of unicast bytes transmitted downstream to this ComPort in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.2 |
hcxEtherStuCurrUpstrmBytesContains the number of bytes received upstream from this ComPort in the current 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.3 |
hcxEtherStuCurrUpstrmAal5CrcErrsContains the number of AAL5 CRC errors related to upstream traffic from the ComPort in the current 15 minute collection period. Each of these errors indicates a dropped Ethernet frame.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.4 |
hcxEtherStuCurrDnstrmDropPktsContains the number of dropped Ethernet frames in the downstream direction in the current 15min period. These frames are generally dropped due to policing.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.5 |
hcxEtherStuPrevDnstrmBytesContains the number of unicast bytes transmitted downstream to this ComPort in the last 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.6 |
hcxEtherStuPrevUpstrmBytesContains the number of bytes received upstream from this ComPort in the last 15 minute collection period.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.7 |
hcxEtherStuPrevUpstrmAal5CrcErrsContains the number of AAL5 CRC errors related to upstream traffic from the ComPort in the last 15 minute collection period. Each of these errors indicates a dropped Ethernet frame.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.8 |
hcxEtherStuPrevDnstrmDropPktsContains the number of dropped RX frames in the upstream direction in the previous 15min period.ro Gauge32 .1.3.6.1.4.1.1141.2.45.1.1.9 |
hcxEtherStuClearStatsThis attribute is used to clear all ComPort statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.2.45.1.1.10 |
com21HcxServGrpAssocGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.46 |
com21HcxServGrpAssocTable. SEQUENCE OF HcxServGrpAssocEntry .1.3.6.1.4.1.1141.2.46.1 |
com21HcxServGrpAssocEntry. HcxServGrpAssocEntry .1.3.6.1.4.1.1141.2.46.1.1 |
hcxServGrpAssocShelfIddefines shelfId to index into this entry. It is the ShelfId where this Service Group has an entryro INTEGER .1.3.6.1.4.1.1141.2.46.1.1.1 |
hcxServGrpAssocSlotIddefines SlotId to index into this entry. It is the slot where this Service Group has an entryro INTEGER .1.3.6.1.4.1.1141.2.46.1.1.2 |
hcxServGrpAssocCardTypedefines cardType to index into this entry. It is the card Type where this Service Group has an entryro Enumeration .1.3.6.1.4.1.1141.2.46.1.1.3 |
hcxServGrpAssocPortIddefines portId to index into this entry. It is the port number where this Service Group has an entryro Integer32 .1.3.6.1.4.1.1141.2.46.1.1.4 |
hcxServGrpAssocEntryIddefines entryId to index into this entry. it is the entry number assigned to this service groupro Integer32 .1.3.6.1.4.1.1141.2.46.1.1.5 |
hcxServGrpAssocRatecontains Rate associated with this Entry.ro Integer32 .1.3.6.1.4.1.1141.2.46.1.1.6 |
hcxServGrpAssocTypecontains Type associated with this Entry.ro Enumeration .1.3.6.1.4.1.1141.2.46.1.1.7 |
hcxServGrpAssocNumOfVlanscontains number of Vlans associated with this Service Groupro Integer32 .1.3.6.1.4.1.1141.2.46.1.1.8 |
hcxServGrpAssocNumOfStuscontains number of Stus associated with this Service Groupro Integer32 .1.3.6.1.4.1.1141.2.46.1.1.9 |
hcxEtherUnitPrimStateChangeThis trap is generated whenever a change in the the hcxEtherUnitPrimServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.20 |
hcxEtherUnitSecStateChangeThis trap is generated whenever a change in the the hcxEtherUnitSecServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.21 |
hcxEtherTestStatusLedChangegenerated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.22 |
hcxEtherFaultStatusLedChangegenerated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.23 |
hcxEtherPortPrimStateChangeThis trap is generated whenever a change in the the hcxEtherPortPrimServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.24 |
hcxEtherPortSecStateChangeThis trap is generated whenever a change in the the hcxEtherPortSecServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.25 |
hcxEtherPortDiagTestCompleteThis notification is generated whenever the Ethernet port internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.26 |
hcxEtherOperationFailureThis notification is generated by the CC whenever an Ethernet port fails to respond correctly to a request. This failure could indicate either a resource problem or software failure. Note that if an Ethernet card failures to respond completely to a CC request, then a hcxInsertChange trap shall be generated. This is an event without a corresponding clear. Only severity allowed is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.27 |
hcxEtherPortLinkStatusLedChangegenerated whenever there is a change in link LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.28 |