COM21-HCXSTUPRXY-MIB
This is the Com21 ComController ComPort Proxy MIB. COM21 Part# 005-0025-00
Main OID:
com21StuPrxy.1.3.6.1.4.1.1141.3.1
187
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
187 total| Object Name |
|---|
com21StuPrxyThis is the Com21 ComController ComPort Proxy MIB. COM21 Part# 005-0025-00 MODULE-IDENTITY .1.3.6.1.4.1.1141.3.1 |
com21StuControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.2 |
com21StuControlTable. SEQUENCE OF StuControlEntry .1.3.6.1.4.1.1141.3.2.1 |
com21StuControlEntry. StuControlEntry .1.3.6.1.4.1.1141.3.2.1.1 |
stuCtrlMacAddressContains IEEE 802 medium access control address of the ComPort device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.2.1.1.1 |
stuUserTextThe ComPort User Text is a non-volatile string which is set by the management system with an arbitrary value. This value does not have to be unique. It's purpose is solely to assist the carrier personnel with identifying the ComPort device.rw DisplayString .1.3.6.1.4.1.1141.3.2.1.1.2 |
stuSerialNumberThe Serial Number is a 10 character serial number used by COM21 to uniquely identify the device.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.3 |
stuBoardRevisionThis string defines the hardware revision of the ComPort board.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.4 |
stuUnitRevisionThis string defines the hardware revision of the complete ComPort unit.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.5 |
stuTunerRevisionThis string defines the hardware revision of the RF Tuner.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.6 |
stuModelNameThis string defines the ComPort Model Type.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.7 |
stuUnitManufacturerThis string defines the manufacturer of the ComPort. Initially COM21 and 3COM.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.8 |
stuDesKeySizeDES encryption key size supported by the ComPort.ro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.9 |
stuMibRevisionIndicates the Mib Revision as display string of max. 8 bytes. That includes string terminator.ro DisplayString .1.3.6.1.4.1.1141.3.2.1.1.10 |
stuEpochTimeComPort time in seconds since 1970.rw EpochTime .1.3.6.1.4.1.1141.3.2.1.1.11 |
stuRestartActionThe Restart Action is an active-value. The setting of this value is idempotent. The setting of this value to restart causes the STU to restart utilizing the present software load.rw Enumeration .1.3.6.1.4.1.1141.3.2.1.1.12 |
stuPrevTestResultResult of previous test. Presently this will be warm or cold restart.ro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.13 |
stuPrevTestFailCodeFailure result code. Only set if stuPrevTestResult is equal to failure.ro INTEGER (-32768..-1) .1.3.6.1.4.1.1141.3.2.1.1.14 |
stuOperationStateThe ComPort Operational State is controlled either by the stuAdminState or locally detected conditions. Note that downloading and failedRanging are ComController helded states.ro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.15 |
stuAimModuleIdidentifies the connected AIM module type. The maceEthernet entry indicates NO AIM inserted.ro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.16 |
stuUpstrmTestFreqTransmit Frequency used by ComPort for Upstream RF test. The default shall be 0 (an invalid freq).rw UpstrmFreqKhz .1.3.6.1.4.1.1141.3.2.1.1.17 |
stuInbPresentIndicates if the INB is present on the ComPORT. This is a future item not supported by present ComPORT hardware.ro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.19 |
stuInbContToneEnableControls the activation of a continuous pilot tone. This does not effect the standard tone sent before data (which is controlled by a hardware switch). This value is not stored in NVRAM. Default is disable.rw Enumeration .1.3.6.1.4.1.1141.3.2.1.1.20 |
stuLastRestartCausespecifies the reason for the last ComPort reset.ro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.21 |
stuUpstrmPingCntrlused to control the upstream ping. Default is enable.rw Enumeration .1.3.6.1.4.1.1141.3.2.1.1.22 |
stuUpstrmTestTimeouttimeout used by ComPort for Upstream RF test. If the ComController does not terminate the test in this period - defined in seconds - then the ComPort will automatically reset, thus terminating the test. 0 means no timeout. Default is 0.rw INTEGER .1.3.6.1.4.1.1141.3.2.1.1.23 |
stuDnstrmAltFreqDefines an alternate downstream frequency for the ComPort. This value is non-voltile. Default is 0 (an invalid freq). IMPORTANT - this is a tbd feature not available in 2.3 release.rw FrequencyKhz .1.3.6.1.4.1.1141.3.2.1.1.24 |
stuAsicRevisiondefines the revision of the ASIC. Presently values 1-255 are supported.ro INTEGER .1.3.6.1.4.1.1141.3.2.1.1.25 |
stuVoiceAimLpBkIf a voiceAim Module is configured on the stu, setting the Aim Module to stuLpBk will configure the Aim Module to loopback from one voice port to the other. default: nilrw Enumeration .1.3.6.1.4.1.1141.3.2.1.1.26 |
stuVoiceAimPort1StatusDescribes whether the AimPort is onhook or offhook. default: nilro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.27 |
stuVoiceAimPort2StatusDescribes whether the AimPort is onhook or offhook. default: nilro Enumeration .1.3.6.1.4.1.1141.3.2.1.1.28 |
com21StuPhysicalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.3 |
com21StuPhysicalTable. SEQUENCE OF StuPhysicalEntry .1.3.6.1.4.1.1141.3.3.1 |
com21StuPhysicalEntry. StuPhysicalEntry .1.3.6.1.4.1.1141.3.3.1.1 |
stuPhyMacAddressContains IEEE 802 medium access control address of the ComPort device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.3.1.1.1 |
stuXmitFrequencyContains the transmit frequency of the ComPort RF board in KHz. A change in this value shall result in the ComPort being hopped to a differing RX card. The Common Controller shall ensure the sanity of a change to this attribute and shall perform the necessary interface to the RX cards. The actual set of this attribute on the ComPort shall be performed by a GO_SET message.rw UpstrmFreqKhz .1.3.6.1.4.1.1141.3.3.1.1.2 |
stuRecvFrequencyContains the receive frequency in KHz. This attribute will match the downstream frequency of the ComController. The ONLY time when this should be change is when the NMAPS wishes hop the ComPort to a different ComController.rw FrequencyKhz .1.3.6.1.4.1.1141.3.3.1.1.3 |
stuRecvRfSrEstimateReceived Signal S/R estimate in dB on Rf Downstream. This value is an approximation in dB. Received value should be divided by 10 to get a fixed point representation. e.g., value 185 means 18.5 dB.ro Integer32 .1.3.6.1.4.1.1141.3.3.1.1.4 |
stuRecvRfSigLevelReceived Signal Level in dBmv on Rf Downstream.ro Integer32 .1.3.6.1.4.1.1141.3.3.1.1.5 |
stuXmitOffsetSpecifies the transmit offset of the ComPort.ro Offset .1.3.6.1.4.1.1141.3.3.1.1.6 |
stuXmitDacVRefSpecifies the upstream RF DAC Voltage Reference. This value is set only via a GO_SET message under the control of the RX card.ro INTEGER .1.3.6.1.4.1.1141.3.3.1.1.7 |
stuRecvFreqDriftFrequency shift (+/- 250Khz) from Downstream Frequency.ro INTEGER (-250..250) .1.3.6.1.4.1.1141.3.3.1.1.8 |
com21StuAlarmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.4 |
com21StuAlarmTable. SEQUENCE OF StuAlarmEntry .1.3.6.1.4.1.1141.3.4.1 |
com21StuAlarmEntry. StuAlarmEntry .1.3.6.1.4.1.1141.3.4.1.1 |
stuAlmMacAddressContains IEEE 802 medium access control address of the ComPort device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.4.1.1.1 |
stuAlmTimeSpecifies the time the alarm condition was detected.ro EpochTime .1.3.6.1.4.1.1141.3.4.1.1.2 |
stuAlmTrapIdSpecifies the trap number.ro INTEGER .1.3.6.1.4.1.1141.3.4.1.1.3 |
stuAlmSeveritySpecifies the alarm severity.ro AlarmSeverity .1.3.6.1.4.1.1141.3.4.1.1.4 |
com21StuEtherConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.5 |
com21StuEtherConfigTable. SEQUENCE OF StuEtherConfigEntry .1.3.6.1.4.1.1141.3.5.1 |
com21StuEtherConfigEntry. StuEtherConfigEntry .1.3.6.1.4.1.1141.3.5.1.1 |
stuEthMacAddressContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.5.1.1.1 |
stuEtherFiltFlushActionControls the flush operations.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.2 |
stuEtherForwArpOnlyIf enable state then only ARP broadcast packets are forwarded upstream. Default is disable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.3 |
stuEtherMacFiltAgeSpecifies the number of seconds that a learned MAC Address entry survives since last learning.rw INTEGER .1.3.6.1.4.1.1141.3.5.1.1.4 |
stuEtherBCastRateEnEnable rate control. Default is disabled.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.5 |
stuEtherBCastRateCoLimit of maximum number of broadcast packets per second allowed upstream.rw INTEGER .1.3.6.1.4.1.1141.3.5.1.1.6 |
stuEtherStickyBitCtrlWhen the Sticky Bit control is enabled, a MAC table entry will not be replaced by another MAC address for at least one aging period. Default disable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.7 |
stuEther8021QEnableEnables both 802.1Q priority queuing and the filter of 802.1Q format packets. Default disable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.8 |
stuEtherNonSnapRejThis attribute controls the filtering of 802.2 non- SNAP encoded packets. Ethernet type filtering must be enabled to activate this feature. Default disable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.9 |
stuEtherIgmpEnableThis attribute controls the forwarding of IGMP multicast traffic upstream. This attribute will override any other multicast filtering in the case of IGMP packets. Default is enable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.10 |
stuEtherNonIpMultiEnThis attribute controls the forwarding of non-IP multicast traffic upstream. This attribute will override any other multicast filtering in the case of non-IP multicast packets. Default is enable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.11 |
stuEtherBcmpOnlyWhen this attribute is enabled, all non-BCMP traffic will be rejected in both the upstream and downstream. This attribute is utilized in a Spannong Tree implementation. Default is disable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.12 |
stuEtherIgmpSnoopEnableThis attribute controls the snooping of IGMP multicast traffic upstream. Default is disable.rw Enumeration .1.3.6.1.4.1.1141.3.5.1.1.13 |
com21StuEtherTypeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.6 |
com21StuEtherTypeTable. SEQUENCE OF StuFiltEthTypeEntry .1.3.6.1.4.1.1141.3.6.1 |
com21StuFiltEthTypeEntryHolds Ethernet Types codes that are to be passed upstream. Maximum of 6 entries. StuFiltEthTypeEntry .1.3.6.1.4.1.1141.3.6.1.1 |
stuFiltEtherMacAddrContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.6.1.1.1 |
stuFiltEtherTypeHolds Ethernet Type codes that is to be passed upstream. Held on ComPort.ro INTEGER .1.3.6.1.4.1.1141.3.6.1.1.2 |
stuFiltEtherStatusThis attribute is used to create or delete Ethernet Type entry.rw Com21RowStatus .1.3.6.1.4.1.1141.3.6.1.1.3 |
com21StuFiltIpMultiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.7 |
com21StuFiltIpMultiTable. SEQUENCE OF StuFiltIpMultiEntry .1.3.6.1.4.1.1141.3.7.1 |
com21StuFiltIpMultiEntryHolds IP Multicast Addresses that are to be allowed in either upstream, or downstream, or both directions. Maximum of 16 entries. StuFiltIpMultiEntry .1.3.6.1.4.1.1141.3.7.1.1 |
stuFiltIpMacAddrContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.7.1.1.1 |
stuFiltIpMultiAddrHolds Multicast Address. Held on ComPort. Valid values are within the range of MAC addresses of 01.00.5E.00.00.00 to 01.00.5E.7F.FF.FFro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.7.1.1.2 |
stuFiltIpMultiStatusUsed to delete or create an entry.rw Com21RowStatus .1.3.6.1.4.1.1141.3.7.1.1.3 |
stuFiltIpDirectCntrlUsed to control the filter direction. Default is bothDirections.rw Enumeration .1.3.6.1.4.1.1141.3.7.1.1.4 |
com21StuEtherMacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.8 |
com21StuEtherMacTable. SEQUENCE OF StuEtherMacEntry .1.3.6.1.4.1.1141.3.8.1 |
com21StuEtherMacEntryHolds Ethernet MAC address that are to be processed as specified. Maximum of 8 entries. StuEtherMacEntry .1.3.6.1.4.1.1141.3.8.1.1 |
stuEtherStuMacContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.8.1.1.1 |
stuEtherMacAddrHolds MAC address. Held on ComPort.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.8.1.1.2 |
stuEtherMacTypeHolds action to be performed upon packets of the specified MAC address. In the case of the learned MAC address, this entry becomes read only. Held on ComPort.rw Enumeration .1.3.6.1.4.1.1141.3.8.1.1.3 |
stuEtherMacStatusUsed to create or delete an entry.rw Com21RowStatus .1.3.6.1.4.1.1141.3.8.1.1.4 |
com21StuEtherStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.9 |
com21StuEtherStatsTable. SEQUENCE OF StuEtherStatsEntry .1.3.6.1.4.1.1141.3.9.1 |
com21StuEtherStatsEntry. StuEtherStatsEntry .1.3.6.1.4.1.1141.3.9.1.1 |
stuEthStatsMacAddrContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.9.1.1.1 |
stuCurrEtherRuntsContains number of runt packets received by the ComPort in the current 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.2 |
stuCurrEtherCollitnsContains number of collisions detected by the ComPort in the current 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.3 |
stuCurrEtherFramErrsContains number of Ethernet Packets with Framing Errors detected by the ComPort in the current 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.4 |
stuCurrEtherCrcErrsContains number of Ethernet Packets with CRC Errors detected by the ComPort in the current 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.5 |
stuCurrEtherCrcThrescontains 15minute error level at which a threshold trap shall be generated. This is mapped to theComPort alarm severity entry stuThresholdLevel. Default is 0 - threshold disabled.rw Integer32 .1.3.6.1.4.1.1141.3.9.1.1.6 |
stuCurrEtherTxUnderContains number of times Ethernet TX FIFO Underflow occurred on transmit queue in the current 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.7 |
stuCurrEtherRxOverContains number of times Ethernet RX FIFO Overflow occurred on a receive queue in the current 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.8 |
stuCurrEtherDropFrmsContains number of receive frames dropped by MACE controller in the current 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.9 |
stuPrevEtherRuntsContains number of runt packets received by the ComPort in the previous 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.10 |
stuPrevEtherCollitnsContains number of collisions detected by the ComPort in the previous 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.11 |
stuPrevEtherFramErrsContains number of Ethernet Packets with Framing Errors detected by the ComPort in the previous 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.12 |
stuPrevEtherCrcErrsContains number of Ethernet Packets with CRC Errors detected by the ComPort in the previous 15minute period. This data is held on the ComPort.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.13 |
stuPrevEtherTxUnderContains number of times Ethernet TX FIFO Underflow occurred on transmit queue in the previous 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.14 |
stuPrevEtherRxOverContains number of times Ethernet RX FIFO Overflow occurred on a receive queue in the previous 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.15 |
stuPrevEtherDropFrmsContains number of receive frames dropped by MACE controller in the previous 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.9.1.1.16 |
stuEtherConnStateContains state of Ethernet connection.ro Enumeration .1.3.6.1.4.1.1141.3.9.1.1.17 |
stuEtherClearStatsThis attribute is used to clear all Ethernet statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.3.9.1.1.18 |
com21StuStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.10 |
com21StuStatsTable. SEQUENCE OF StuStatsEntry .1.3.6.1.4.1.1141.3.10.1 |
com21StuStatsEntry. StuStatsEntry .1.3.6.1.4.1.1141.3.10.1.1 |
stuStatsMacAddressContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.10.1.1.1 |
stuStatsCurrAtmTeiNumber of cells received with transport errors - uncorrectable FEC or HEC errors - in the current 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.2 |
stuAtmTeiThresholdcontains 15minute transport error level at which a threshold trap shall be generated. Default is 0 - threshold disabled.rw Integer32 .1.3.6.1.4.1.1141.3.10.1.1.3 |
stuStatsCurrAtmHecNumber of cells received with HEC or Encryption errors in the current 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.4 |
stuAtmHecThresholdcontains 15minute HEC error level at which a threshold trap shall be generated. Default is 0 - threshold disabled.rw Integer32 .1.3.6.1.4.1.1141.3.10.1.1.5 |
stuStatsCurrESMinRepresents the number of errored seconds in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.6 |
stuESMinThresholdcontains 15minute errored seconds level at which a threshold trap shall be generated. Default is 0 - threshold disabled.rw Integer32 .1.3.6.1.4.1.1141.3.10.1.1.7 |
stuStatsCurrFecCorrectFecs corrected by Demodulator on Downstream in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.8 |
stuFecCorrectThresholdcontains 15minute Fecs corrected level at which a threshold trap shall be generated. Default is 0 - threshold disabled.rw Integer32 .1.3.6.1.4.1.1141.3.10.1.1.9 |
stuStatsCurrUASMinRepresents the number of unavailable seconds in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.10 |
stuStatsPrevAtmTeiNumber of cells received with transport errors - HEC or uncorrectable FEC errors - in the previous 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.11 |
stuStatsPrevAtmHecNumber of cells received with HEC or Encryption errors in the previous 15minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.12 |
stuStatsPrevESMinRepresents the number of errored seconds in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.13 |
stuStatsPrevFecCorrectFecs corrected by Demodulator on Downstream in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.14 |
stuStatsPrevUASMinRepresents the number of unavailable seconds in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.10.1.1.15 |
stuStatsClearStatsThis attribute is used to clear the all ComPort statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.3.10.1.1.16 |
com21StuQStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.11 |
com21StuQStatsTable. SEQUENCE OF StuQStatsEntry .1.3.6.1.4.1.1141.3.11.1 |
com21StuQStatsEntry. StuQStatsEntry .1.3.6.1.4.1.1141.3.11.1.1 |
stuAtmStuMacAddrContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.11.1.1.1 |
stuAtmStuQNoThis index consists of a number representing a Mongoose queue. For initial phase this number shall equal the associated VCI number. i.e. Ethernet or Telephony VCIs. This VCI number shall be mapped to a Mongoose queue id by the ComController. For 3.0 there is only a single Ethernet queue - queue 5.ro Integer32 .1.3.6.1.4.1.1141.3.11.1.1.2 |
stuAtmStatsCurrMinRxRepresents the number of cells or frames successfully received in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.11.1.1.3 |
stuAtmStatsCurrMinRxDroppedRepresents the number of cells or frames dropped in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.11.1.1.4 |
stuAtmStatsCurrMinCRCErrorsRepresents the number of cells or frames received with CRC errors in the current 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.11.1.1.5 |
stuAtmStatsPrevMinRxRepresents the number of cells or frames successfully received in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.11.1.1.6 |
stuAtmStatsPrevMinRxDroppedRepresents the number of cells or frames dropped in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.11.1.1.7 |
stuAtmStatsPrevMinCRCErrorsRepresents the number of cells or frames received with CRC errors in the previous 15 minute period.ro Gauge32 .1.3.6.1.4.1.1141.3.11.1.1.8 |
stuAtmStatsClearStatsThis attribute is used to clear the ComPort queue statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.3.11.1.1.9 |
com21StuAlarmSevGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.12 |
com21StuAlarmSevTable. SEQUENCE OF StuAlarmSevEntry .1.3.6.1.4.1.1141.3.12.1 |
com21StuAlarmSevEntry. StuAlarmSevEntry .1.3.6.1.4.1.1141.3.12.1.1 |
stuAlmSevMacAddressContains IEEE 802 medium access control address of the ComPort device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.12.1.1.1 |
stuAlmSevCrcThresSpecifies the CRC Error Threshold alarm severity. Default Minor.rw AlarmSeverity .1.3.6.1.4.1.1141.3.12.1.1.2 |
stuAlmSevTeiThresSpecifies the TEI Threshold alarm severity. Default Minor.rw AlarmSeverity .1.3.6.1.4.1.1141.3.12.1.1.3 |
stuAlmSevHecThresSpecifies the HEC Error Threshold alarm severity. Default Minor.rw AlarmSeverity .1.3.6.1.4.1.1141.3.12.1.1.4 |
stuAlmSevEsThresSpecifies the Errored Seconds Threshold alarm severity. Default Minor.rw AlarmSeverity .1.3.6.1.4.1.1141.3.12.1.1.5 |
stuAlmSevFecThresSpecifies the Corrected FEC Threshold alarm severity. Default Minor.rw AlarmSeverity .1.3.6.1.4.1.1141.3.12.1.1.6 |
com21StuCodeImageGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.13 |
com21StuCodeImageTable. SEQUENCE OF StuCodeImageEntry .1.3.6.1.4.1.1141.3.13.1 |
com21StuCodeImageEntry. StuCodeImageEntry .1.3.6.1.4.1.1141.3.13.1.1 |
stuCodeStuMacAddrContains IEEE 802 medium access control address of the ComPort device. Held on ComController.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.13.1.1.1 |
stuCodeImageIndexIndex to receive information about various images; VxWorks - operating system. ApplicationStu - Image comprising Stu Application, DownloadImage - Image downloaded into DRAM.ro Enumeration .1.3.6.1.4.1.1141.3.13.1.1.2 |
stuCodeImageTypeCode image identifier. vxWorks - boot code and OS, boot memory resident, stuBoot - backup application image, boot memory resident, stuNewapp - primary application image, app memory resident, stuDnld - downloaded application supplement (optional), updateApp - downloaded flash update, updates app flash, updateBoth - downloaded flash update, updates boot+app flash.ro Enumeration .1.3.6.1.4.1.1141.3.13.1.1.3 |
stuCodeImageVersionVersion Description for the Code Image.ro DisplayString .1.3.6.1.4.1.1141.3.13.1.1.4 |
stuCodeImageBuildDirDirectory name where image was built.ro DisplayString .1.3.6.1.4.1.1141.3.13.1.1.5 |
stuCodeImageDateDate when the image is built.ro DisplayString .1.3.6.1.4.1.1141.3.13.1.1.6 |
stuCodeImageTimeTime when the image is built.ro DisplayString .1.3.6.1.4.1.1141.3.13.1.1.7 |
com21StuVoiceChanStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.3.14 |
com21StuVoiceChanStatsTable. SEQUENCE OF StuVoiceChanStatsEntry .1.3.6.1.4.1.1141.3.14.1 |
com21StuVoiceChanStatsEntry. StuVoiceChanStatsEntry .1.3.6.1.4.1.1141.3.14.1.1 |
stuVoiceChanStatsMacAddrContains IEEE 802 medium access control address of the ComPort device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.3.14.1.1.1 |
stuVoiceChanStatsNumDefines the voice port on the Comport device used for Voice.ro INTEGER ( 1..2 ) .1.3.6.1.4.1.1141.3.14.1.1.2 |
stuVoiceChanStatsCurrLostCellCntDefines the number of times the Comport's voice port received Cells out of sequence in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.3 |
stuVoiceChanStatsCurrDrpdCellCntDefines the number of times the Comport's voice port dropped cells due to Queue Full in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.4 |
stuVoiceChanStatsCurrCrc3ErrCntDefines the number of cells Comport's voice port received with CRC3 Errors in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.5 |
stuVoiceChanStatsCurrSetUpFailCntDefines the number of times the Comport's voice port had to drop the calls due to Call Setup Failure in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.6 |
stuVoiceChanStatsCurrTxVoiceCellCntDefines the number of Voice cells Comport's voice port Queued to Transmit in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.7 |
stuVoiceChanStatsCurrRxVoiceCellCntDefines the number of Voice cells the Comport's voice port received in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.8 |
stuVoiceChanStatsCurrTxOamCellCntDefines the number of OAM cells Comport's voice port Queued to Transmit in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.9 |
stuVoiceChanStatsCurrRxOamCellCntDefines the number of OAM cells the Comport's voice port received in the current 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.10 |
stuVoiceChanStatsPrevLostCellCntDefines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.11 |
stuVoiceChanStatsPrevDrpdCellCntDefines the number of times the Comport's voice port dropped cells due to Queue Full in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.12 |
stuVoiceChanStatsPrevCrc3ErrCntDefines the number of cells Comport's voice port received with CRC3 Errors in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.13 |
stuVoiceChanStatsPrevSetUpFailCntDefines the number of times the Comport's voice port had to drop the calls due to Call Setup Failure in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.14 |
stuVoiceChanStatsPrevTxVoiceCellCntDefines the number of Voice cells Comport's voice port Tranmitted in the previous 15-min periodro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.15 |
stuVoiceChanStatsPrevRxVoiceCellCntDefines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.16 |
stuVoiceChanStatsPrevTxOamCellCntDefines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.17 |
stuVoiceChanStatsPrevRxOamCellCntDefines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.ro Integer32 .1.3.6.1.4.1.1141.3.14.1.1.18 |
stuVoiceChanStatsClearProvides the capability to clear the statistics. Clearing of statistics allowed only if hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.3.14.1.1.19 |
stuOperationStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.110 |
stuXmitFeqChangeThis trap is generated whenever an ComPort is hopped. It will not be generated at initial acquisition. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.111 |
stuEtherCrcThres. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.112 |
stuAtmTeiThres. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.113 |
stuAtmHecThres. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.114 |
stuESMinThres. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.115 |
stuFecCorrectThres. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.116 |
stuOutOfSpecRFCondThis trap is generated whenever an ComPort is acquired with out of spec signal quality condition. The trap trap is issued after the GO-SET-DONE message. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.117 |
stuMaceFailThis trap would be sent after ComPort is completely booted. That is, at least download is completed. Event will be detected during POST (Power On Self Test) NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.119 |