COM21-HCXOC3-MIB
This is the Com21 ComController Oc3 MIB module. COM21 Part# 005-0025-00
Main OID:
com21HcxOc3.1.3.6.1.4.1.1141.2.90
98
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
com21HcxOc3This is the Com21 ComController Oc3 MIB module. COM21 Part# 005-0025-00 MODULE-IDENTITY .1.3.6.1.4.1.1141.2.90 |
com21HcxOc3UnitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.91 |
com21HcxOc3UnitTable. SEQUENCE OF HcxOc3UnitEntry .1.3.6.1.4.1.1141.2.91.1 |
com21HcxOc3UnitEntry. HcxOc3UnitEntry .1.3.6.1.4.1.1141.2.91.1.1 |
hcxOc3UnitShelfIdcontains the associated shelf id.ro INTEGER (1) .1.3.6.1.4.1.1141.2.91.1.1.1 |
hcxOc3UnitSlotIdcontains associated slot id.ro Integer32 .1.3.6.1.4.1.1141.2.91.1.1.2 |
hcxOc3HardwareVersioncontains the hardware version of the Oc3 card. Will contain empty string if card has not been inserted in the slot.ro DisplayString .1.3.6.1.4.1.1141.2.91.1.1.3 |
hcxOc3BootVersioncontains the version of the Oc3 card boot ROM. Will contain empty string if card has not been inserted in the slot.ro DisplayString .1.3.6.1.4.1.1141.2.91.1.1.4 |
hcxOc3UnitPrimServStatecontains primary service state of the Oc3 Unit.ro PrimServiceState .1.3.6.1.4.1.1141.2.91.1.1.5 |
hcxOc3UnitSecServStatecontains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: UNEQ - unequipped.ro DisplayString .1.3.6.1.4.1.1141.2.91.1.1.6 |
hcxOc3RestartActionThe Oc3 Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 card to reset and download a new image.rw Enumeration .1.3.6.1.4.1.1141.2.91.1.1.7 |
hcxOc3TestStatusLedThe Oc3 Test Status LED is a read-only attribute which describes the condition of the Oc3 Test Status light emitting diode located on the Oc3 board. A value of on(1) indicates that a service effecting test is in progress and that the LED is illuminated. Will be off if no card present.ro Enumeration .1.3.6.1.4.1.1141.2.91.1.1.8 |
hcxOc3FaultStatusLedThe Oc3 Fault Status LED is a read-only attribute which describes the condition of the Oc3 Fault Status light emitting diode located on the Oc3 board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated. Will be off if no card present.ro Enumeration .1.3.6.1.4.1.1141.2.91.1.1.9 |
hcxOc3SerialNumbercontains the serial number of the Oc3 card. Will contain empty string if card has not been inserted in the slot.ro DisplayString .1.3.6.1.4.1.1141.2.91.1.1.10 |
hcxOc3SyncClkConfigureThis attribute allows to configure the Oc3 card as the primary or secondary source for network clock. This attribute is valid only if networkClk is selected in hcxSyncClkConfigure attribute. Only 1 Oc3 Card can be configured as the priSrc and 1 Oc3 Card can be configured as secSrc in the HCX system Default: disablerw Enumeration .1.3.6.1.4.1.1141.2.91.1.1.11 |
com21HcxOc3PortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.92 |
com21HcxOc3PortTable. SEQUENCE OF HcxOc3PortEntry .1.3.6.1.4.1.1141.2.92.1 |
com21HcxOc3PortEntry. HcxOc3PortEntry .1.3.6.1.4.1.1141.2.92.1.1 |
hcxOc3PortShelfIdcontains shelf in which this Oc3 port is located.ro INTEGER (1) .1.3.6.1.4.1.1141.2.92.1.1.1 |
hcxOc3PortSlotIdcontains slot in which this Oc3 port is located.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.2 |
hcxOc3PortIdcontains port Id Oc3 port.ro INTEGER (1) .1.3.6.1.4.1.1141.2.92.1.1.3 |
hcxOc3PortPrimServStatecontains primary service state of the Oc3 Unit. This state shall be effected by the hcxOc3PortState attribute.ro PrimServiceState .1.3.6.1.4.1.1141.2.92.1.1.4 |
hcxOc3PortSecServStatecontains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: MT - offline, set by hcxOc3, FAULT - hardware failure, TEST - test, UNEQ - unequipped.ro DisplayString .1.3.6.1.4.1.1141.2.92.1.1.5 |
hcxOc3MaxBandwidthThis attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxOc3MaxBandwidth and hcxEtherMaxBandwidth attributes for each of the Oc3 and Ethernet ports does not exceed the system maximum. If Voice Channels are configured on this Port, and if Voice channels are active, Ondemand Data bandwidth will get squeezed if Voice Channels are active. Default: 7000rw INTEGER .1.3.6.1.4.1.1141.2.92.1.1.6 |
hcxOc3AggrDnStrmCbrRateThis attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.7 |
hcxOc3AggrDnStrmPcrRateThis attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.8 |
hcxOc3AggrUpStrmCbrRateThis attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.9 |
hcxOc3AggrUpStrmMinRateThis attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.10 |
hcxOc3AggrUpStrmMaxRateThis attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.11 |
hcxOc3AgeTimeThis attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300secs. If this set to 0, then aging is disabled.rw Integer32 .1.3.6.1.4.1.1141.2.92.1.1.12 |
hcxOc3PortConfigStateThe Oc3 Port State is an active-value. The Oc3 port will default to offline, in which case no traffic shall be passed. Default offline.rw Enumeration .1.3.6.1.4.1.1141.2.92.1.1.13 |
hcxOc3PortRestartActionThe Oc3 Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 port to reset and download a new image.rw Enumeration .1.3.6.1.4.1.1141.2.92.1.1.14 |
hcxOc3PortDiagTestActionThis attribute is used to invoke the internal Oc3 card diagnostic test. In order to activate this test, the card must be placed in the test state.rw Enumeration .1.3.6.1.4.1.1141.2.92.1.1.15 |
hcxOc3PortDiagTestResultThis attribute contains the result of the last Oc3 port diagnostic test.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.16 |
hcxOc3PortLOSLedThe OC3 Loss Of Signal LED indicates whether a Loss of Signal is present on the WAN side of the OC3 port.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.17 |
hcxOc3AggrActDnStrmCbrRateThis attribute specifies the aggregate of all ComPort downstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.18 |
hcxOc3AggrActDnStrmPcrRateThis attribute specifies the aggregate of all ComPort downstream PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.19 |
hcxOc3AggrActUpStrmCbrRateThis attribute specifies the aggregate of all ComPort upstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in bits per second.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.20 |
hcxOc3AggrActUpStrmMinRateThis attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.21 |
hcxOc3AggrActUpStrmMaxRateThis attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.22 |
hcxOc3PortIpAddrIP Address associated with this ethernet port. This is a future item for telephone return support.rw IpAddress .1.3.6.1.4.1.1141.2.92.1.1.23 |
hcxOc3PortIpMaskIP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support.rw IpAddress .1.3.6.1.4.1.1141.2.92.1.1.24 |
hcxOc3PortMacAddrMAC address associated with port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1141.2.92.1.1.25 |
hcxOc3Port1483EncapEnblThis attribute is used to Enable/Disable 1483 Encapsulation on the Oc3Port. If enabled, then all Ethernet packets received by the Oc3Port should be 1483 Encapsulated and all Ethernet packets transmitted by the Oc3Port will be 1483 Encapsulated. Default: enable.rw Enumeration .1.3.6.1.4.1.1141.2.92.1.1.26 |
hcxOc3PortSectionLOSThis attribute indicates whether Section Loss of Signal is present at the OC3 Port. Default: off.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.27 |
hcxOc3PortSectionLOFThis attribute indicates whether Section Loss of Frame is present at the OC3 Port. Default: off.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.28 |
hcxOc3PortLineAISThis attribute indicates whether Line Alarm Indication Signal is detected by the OC3 Port Default: off.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.29 |
hcxOc3PortLineRDIThis attribute indicates whether Line Remote Defect Indication is detected by the OC3 Port Default: off.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.30 |
hcxOc3PortPathRDIThis attribute indicates whether Path Remote Defect Indication is detected by the OC3 Port Default: off.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.31 |
hcxOc3PortAggrVoiceRateThis attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configured on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port. The rate specified here includes both acquired and unacquired ComPorts and is the same in both Upstream and Downstream Direction. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.32 |
hcxOc3PortAggrActVoiceRateThis attribute specifies the aggregate Rate of all Voice Channels Active on this Port. A voice channel is considered Active on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port and the Comport is acquired and the Comport has a Voice Channel Active. The rate specified here is the same in both Upstream and Downstream Direction. Defined in Kbps.ro Integer32 .1.3.6.1.4.1.1141.2.92.1.1.33 |
hcxOc3PortLOFLedThe OC3 Loss Of Frame LED indicates whether a Loss of Frame is present on the WAN side of the OC3 port.ro Enumeration .1.3.6.1.4.1.1141.2.92.1.1.34 |
com21HcxOc3VccGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.93 |
com21HcxOc3VccTable. SEQUENCE OF HcxOc3VccEntry .1.3.6.1.4.1.1141.2.93.1 |
com21HcxOc3VccEntry. HcxOc3VccEntry .1.3.6.1.4.1.1141.2.93.1.1 |
hcxOc3VccShelfIdSpecifies the Shelf where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.93.1.1.1 |
hcxOc3VccSlotIdSpecifies the Slot where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.93.1.1.2 |
hcxOc3VccPortIdSpecifies the Port where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.93.1.1.3 |
hcxOc3VccVpiSpecifies the Vpi where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.93.1.1.4 |
hcxOc3VccVciSpecifies the Vci where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.93.1.1.5 |
hcxOc3VccTypeSpecifies whether this VCC is used to transport data or voice.ro Enumeration .1.3.6.1.4.1.1141.2.93.1.1.6 |
com21HcxOc3StatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.94 |
com21HcxOc3StatsTable. SEQUENCE OF HcxOc3StatsEntry .1.3.6.1.4.1.1141.2.94.1 |
com21HcxOc3StatsEntry. HcxOc3StatsEntry .1.3.6.1.4.1.1141.2.94.1.1 |
hcxOc3StatsShelfIdSpecifies the Shelf where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.1 |
hcxOc3StatsSlotIdSpecifies the Slot where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.2 |
hcxOc3StatsPortIdSpecifies the Port where this Entry exists.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.3 |
hcxOc3StatsCurrSectionBIPErrThis attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.4 |
hcxOc3StatsCurrLineBIPErrThis attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.5 |
hcxOc3StatsCurrPathBIPErrThis attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.6 |
hcxOc3StatsCurrLineFEndBlockErrThis attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.7 |
hcxOc3StatsCurrPathFEndBlockErrThis attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.8 |
hcxOc3StatsPrevSectionBIPErrThis attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.9 |
hcxOc3StatsPrevLineBIPErrThis attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.10 |
hcxOc3StatsPrevPathBIPErrThis attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.11 |
hcxOc3StatsPrevLineFEndBlockErrThis attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.12 |
hcxOc3StatsPrevPathFEndBlockErrThis attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period.ro Integer32 .1.3.6.1.4.1.1141.2.94.1.1.13 |
hcxOc3StatsClearThis attribute is used to clear the all OC3 Stats statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.rw Enumeration .1.3.6.1.4.1.1141.2.94.1.1.14 |
hcxOc3UnitPrimStateChangeThis trap is generated whenever a change in the the hcxOc3UnitPrimServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.150 |
hcxOc3UnitSecStateChangeThis trap is generated whenever a change in the the hcxOc3UnitSecServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.151 |
hcxOc3TestStatusLedChangegenerated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.152 |
hcxOc3FaultStatusLedChangegenerated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.153 |
hcxOc3PortPrimStateChangeThis trap is generated whenever a change in the the hcxOc3PortPrimServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.154 |
hcxOc3PortSecStateChangeThis trap is generated whenever a change in the the hcxOc3PortSecServState occurs. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.155 |
hcxOc3PortDiagTestCompleteThis notification is generated whenever the Oc3 port internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.156 |
hcxOc3OperationFailureThis notification is generated by the CC whenever an Oc3 port fails to respond correctly to a request. This failure could indicate either a resource problem or software failure. Note that if an Oc3 card failures to respond completely to a CC request, then a hcxInsertChange trap shall be generated. This is an event without a corresponding clear. Only severity allowed is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.157 |
hcxOc3PortLOSLedChangegenerated whenever there is a change in the LOS LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.158 |
hcxOc3PortSectionLOSDetectedgenerated whenever Loss of Signal is detected at the OC3 Port. Alarm Severity: MAJOR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.159 |
hcxOc3PortSectionLOSCleargenerated whenever Loss of Signal is Cleared at the OC3 Port. Alarm Severity: CLEAR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.160 |
hcxOc3PortSectionLOFDetectedgenerated whenever Loss of Frame is detected at the OC3 Port. Alarm Severity: MAJOR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.161 |
hcxOc3PortSectionLOFCleargenerated whenever Loss of Frame is cleared at the OC3 Port. Alarm Severity: CLEAR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.162 |
hcxOc3PortLineAISDetectedgenerated whenever AIS is detected at the OC3 Port. Alarm Severity: MAJOR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.163 |
hcxOc3PortLineAISCleargenerated whenever AIS is cleared at the OC3 Port. Alarm Severity: CLEAR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.164 |
hcxOc3PortLineRDIDetectedgenerated whenever Line Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.165 |
hcxOc3PortLineRDICleargenerated whenever Line Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.166 |
hcxOc3PortPathRDIDetectedgenerated whenever Path Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.167 |
hcxOc3PortPathRDICleargenerated whenever Path Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.168 |
hcxOc3PortLOFLedChangegenerated whenever there is a change in the LOF LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.169 |