COM21-HCXCC-MIB
This is the Com21 ComController Common Control Unit MIB module. COM21 Part# 005-0025-00
Main OID:
com21HcxCc.1.3.6.1.4.1.1141.2.60
39
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
39 total| Object Name |
|---|
com21HcxCcThis is the Com21 ComController Common Control Unit MIB module. COM21 Part# 005-0025-00 MODULE-IDENTITY .1.3.6.1.4.1.1141.2.60 |
com21HcxCcUnitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.61 |
hcxCcShelfIdcontains the associated shelf id.ro INTEGER .1.3.6.1.4.1.1141.2.61.1 |
hcxCcSlotIdcontains the Common Controller slot id.ro Integer32 .1.3.6.1.4.1.1141.2.61.2 |
hcxCcHardwareVersioncontains the hardware version of the CC card.ro DisplayString .1.3.6.1.4.1.1141.2.61.3 |
hcxCcBootVersioncontains the version of the CC card boot ROM.ro DisplayString .1.3.6.1.4.1.1141.2.61.4 |
hcxSoftwareRevisionThe Common Controller Software Revision is a display string value which contains the software revision of the currently loaded COM21 Common Controller software downloaded from the software server device.ro DisplayString .1.3.6.1.4.1.1141.2.61.6 |
hcxControlPrimServStatecontains primary service state of the Common Controller. This attribute indicates the overall service state of the Controller. OOS indicates that complete service cannot be provided. IS indicates that the Controller is operating as normal, though a non-service effecting error or test condition may exist.ro PrimServiceState .1.3.6.1.4.1.1141.2.61.7 |
hcxControlSecServStatecontains a string defining the secondary service states of the Common Controller. The states supported by the com21HcxControlGroup are: FAN - indicates Fan Failure, HIGH - indicates high temp condition, PWR - indicates power problem.ro DisplayString .1.3.6.1.4.1.1141.2.61.8 |
hcxCcDiagTestActionThis attribute is used to invoke the internal Common Controller diagnostic test. In order to activate this test, the card must be placed in the test state.rw Enumeration .1.3.6.1.4.1.1141.2.61.9 |
hcxCcDiagTestResultThis attribute contains the result of the last CC card diagnostic test.ro Enumeration .1.3.6.1.4.1.1141.2.61.10 |
hcxCcTestStatusLedThe CC Test Status LED is a read-only attribute which describes the condition of the CC Test Status light emitting diode located on the CC. This indicates that a service effecting test is in progress and that the LED is illuminated.ro Enumeration .1.3.6.1.4.1.1141.2.61.11 |
hcxCcFaultStatusLedThe Ethernet Fault Status LED is a read-only attribute which describes the condition of the ComController Ethernet Fault Status light emitting diode located on the Ethernet board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated.ro Enumeration .1.3.6.1.4.1.1141.2.61.12 |
hcxCcEtherLinkStatusLedThe Ethernet Link Status LED is a read-only attribute which describes the condition of the CC Ethernet Link Status light emitting diode located on the CC board. A value of on(1) indicates that the link is up and active, and that the LED is illuminated. Will be off if no card present.ro Enumeration .1.3.6.1.4.1.1141.2.61.13 |
hcxCcFlashBackupPeriodThe period (in seconds) at which the CC shall automatically backup any configuration data to flash. This must be a multiple of 5 seconds upto 15 minutes. Default is 60 seconds.rw INTEGER .1.3.6.1.4.1.1141.2.61.14 |
hcxCcFlashBackupActionThis attribute is used to invoke the Common Controller to save all configuration data to flash.rw Enumeration .1.3.6.1.4.1.1141.2.61.15 |
hcxCcFlashBackupResultThis attribute contains the result of the last CC user directed flash backup.ro Enumeration .1.3.6.1.4.1.1141.2.61.16 |
hcxSwitchSoftwareRevisionsoftware revision of the image loaded on the embedded ATM switch. In the case of the compact ComController this attribute refers to the boot software version.ro DisplayString .1.3.6.1.4.1.1141.2.61.17 |
hcxSwitchHardwareRevisionhardware revision of the embedded ATM switch. This attribute is only applicable for the compact ComController.ro DisplayString .1.3.6.1.4.1.1141.2.61.18 |
hcxSwitchSerialNumberserial number of the embedded ATM switch. This attribute is only applicable for the compact ComController.ro DisplayString .1.3.6.1.4.1.1141.2.61.19 |
hcxNtpv3Controlthis attribute controls the NTPv3 feature. This features should NOT be enabled if NMAPS is in use. The timer servers are specified via com21HcxCcNtpGroup. Default diasble.rw Enumeration .1.3.6.1.4.1.1141.2.61.20 |
hcxDiskFaultStatethis attribute describes the fault state of the PCMCIA disk.ro Enumeration .1.3.6.1.4.1.1141.2.61.21 |
hcxDiskIdentifierthis attribute indentifies the type of PCMCIA device.ro DisplayString .1.3.6.1.4.1.1141.2.61.22 |
hcxMibVersionthis attribute specifies the MIB version used by CC.ro Integer32 .1.3.6.1.4.1.1141.2.61.23 |
com21HcxCcNtpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1141.2.62 |
com21HcxCcNtpTable. SEQUENCE OF HcxCcNtpEntry .1.3.6.1.4.1.1141.2.62.1 |
com21HcxCcNtpEntry. HcxCcNtpEntry .1.3.6.1.4.1.1141.2.62.1.1 |
hcxCcNtpServerIndexthis attribute defines both the index of the address entry. The CC shall attempt to access each in order starting with index 1.ro INTEGER .1.3.6.1.4.1.1141.2.62.1.1.1 |
hcxCcNtpServerAddressthis attribute defines both the IP address of a time server.rw IpAddress .1.3.6.1.4.1.1141.2.62.1.1.2 |
hcxCcNtpServerAddrStatusUsed to delete or create an entry.rw Com21RowStatus .1.3.6.1.4.1.1141.2.62.1.1.3 |
hcxControlPrimServStateChangegenerated whenever hcxControlPrimaryServiceState changes value. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.10 |
hcxControlSecServStateChangegenerated whenever hcxControlSecondaryServiceState changes value. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.11 |
hcxCcDiagTestCompleteThis notification is generated whenever the CC card internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.12 |
hcxCcTestStatusLedChangegenerated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.13 |
hcxCcFaultStatusLedChangegenerated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.14 |
hcxCcEtherLinkStatusLedChangegenerated whenever there is a change in link LED status. This an event with no clear condition. Only severity is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.15 |
hcxCcFlashBackupCompleteThis notification is generated whenever the CC card completes a user directed flash backup of configuration. Only severity allowed is WARNING. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.16 |
hcxDiskAccessFailuregenerated whenever there is a failure to access the PCMCIA disk. Default severity is MAJOR. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.17 |
hcxDiskAccessFailCleargenerated whenever a previously reported disk failure is cleared. Severity is CLEARED. NOTIFICATION-TYPE .1.3.6.1.4.1.1141.4.18 |