CM-TOPOLOGY-MIB
Imported Objects
Objects
17 total| Object Name |
|---|
cmTopologyMIBThis module defines the Topology MIB definitions
used by the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.9 |
cmTopologyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.9.1 |
cmTopologyRegionIdUser specified name of the topology region.rw DisplayString .1.3.6.1.4.1.2544.1.12.9.1.1 |
cmTopologyRegionDescrDescription of the topology region.rw DisplayString .1.3.6.1.4.1.2544.1.12.9.1.2 |
cmTopologyRegionLastUpdateTimeTime when the topology region was last updated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.9.1.3 |
cmTopologyItemTableA list of entries corresponding to the topology items.
Entries cannot be created in this table by management
application action. SEQUENCE OF CmTopologyItemEntry .1.3.6.1.4.1.2544.1.12.9.1.4 |
cmTopologyItemEntryAn entry containing information applicable to a particular
topology item. CmTopologyItemEntry .1.3.6.1.4.1.2544.1.12.9.1.4.1 |
cmTopologyItemIdUser specified name of the topology item.rw DisplayString .1.3.6.1.4.1.2544.1.12.9.1.4.1.1 |
cmTopologyItemDescrDescription of the topology item.rw DisplayString .1.3.6.1.4.1.2544.1.12.9.1.4.1.2 |
cmTopologyLinkTableA list of entries corresponding to the topology links.
Entries cannot be created in this table by management
application action. SEQUENCE OF CmTopologyLinkEntry .1.3.6.1.4.1.2544.1.12.9.1.5 |
cmTopologyLinkEntryAn entry containing information applicable to a particular
topology item. CmTopologyLinkEntry .1.3.6.1.4.1.2544.1.12.9.1.5.1 |
cmTopologyLinkIdUser specified name of the topology link.rw DisplayString .1.3.6.1.4.1.2544.1.12.9.1.5.1.1 |
cmTopologyLinkFromPortTopology Link connects two Network Elements. This object
points to the FROM end Port.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.9.1.5.1.2 |
cmTopologyLinkToPortTopology Link connects two Network Elements. This object
points to the TO end point.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.9.1.5.1.3 |
cmTopologyConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.9.2 |
cmTopologyCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.9.2.1 |
cmTopologyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.9.2.2 |
More MIBs from ADVA AG Optical Networking
Browse all ADVA AG Optical NetworkingMIBs →SNMP MIB module
The ADVA-FSPR7-MIB module enables SNMP-based monitoring and management of ADVA FSP 7000 optical transport network elements, specifically tracking optical channel performance, signal quality metrics, and interface status. It facilitates the collection of critical telemetry data such as optical power levels, bit error rates, and alarm states for the ADVA FSPR7 series equipment.
The ADVA-FSPR7-PM-MIB enables SNMP-based performance monitoring of ADVA FSPR 7000 optical transport network equipment, specifically tracking traffic statistics, error counters, and signal quality metrics for SDH/SONET and OTN interfaces.
The CM-FACILITY-MIB module enables SNMP-based monitoring of facility-level environmental and power infrastructure metrics, such as temperature, humidity, and power supply status, specifically for ADVA Optical Networking's F3 (FSP150CM/CC) product lines.
The CM-PERFORMANCE-MIB enables ADVA Optical Networking FSP150CM/CC platforms to expose optical performance monitoring counters, including signal power, bit error rates, and latency metrics, via the Simple Network Management Protocol. These definitions facilitate the collection of physical layer statistics required for fault detection and service level agreement verification in F3 product line deployments.
SNMP MIB module