CIENA-WS-SYSTEM-MIB
AI MIB Summary
The CIENA-WS-SYSTEM-MIB provides NETCONF-based management and monitoring of Ciena WaveServer system components, exposing operational state, configuration parameters, and performance counters for optical transport infrastructure. It enables programmatic retrieval of device health metrics, interface status, and system resource utilization specific to Ciena's WaveServer platform.
This YANG module defines Ciena's WaveServer System representation for the NETCONF protocol
Main OID:
cienaWsSystemMIB.1.3.6.1.4.1.1271.3.4.12
122
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
122 total| Object Name |
|---|
cienaWsSystemMIBThis YANG module defines Ciena's WaveServer System representation for the NETCONF protocol MODULE-IDENTITY .1.3.6.1.4.1.1271.3.4.12 |
cienaWsSystemObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.12.1 |
cienaWsSystemConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.12.2 |
cienaWsSystemGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.12.2.1 |
cienaWsSystemGroupConformance Group Unknown .1.3.6.1.4.1.1271.3.4.12.2.1.1 |
cienaWsSystemCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.12.2.2 |
cienaWsSystemComplianceCompliance Unknown .1.3.6.1.4.1.1271.3.4.12.2.2.1 |
cwsSystemSiteTableWaveserver system site attributes. SEQUENCE OF CwsSystemSiteEntry .1.3.6.1.4.1.1271.3.4.12.3 |
cwsSystemSiteEntryEntry for cwsSystemSiteTable. CwsSystemSiteEntry .1.3.6.1.4.1.1271.3.4.12.3.1 |
cwsSystemSiteTableSnmpKeyUnique key for cwsSystemSite Integer32 .1.3.6.1.4.1.1271.3.4.12.3.1.1 |
cwsSystemSiteIdAn integer to uniquely identify the site where this Waveserver is located. This is used to help group Waveservers together with line system equipment. All equipment in a common site should share the same site identifier.rw Unsigned32 .1.3.6.1.4.1.1271.3.4.12.3.1.2 |
cwsSystemSiteNameThe name for the site where the Waveserver is located.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.3.1.3 |
cwsSystemSiteDescriptionThe site descriptionrw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.3.1.4 |
cwsSystemSiteLatitudeGeographic coordinate for the site location in degrees.rw Decimal32Len5 .1.3.6.1.4.1.1271.3.4.12.3.1.5 |
cwsSystemSiteLongitudeGeographic coordinate for the site location in degrees.rw Decimal32Len5 .1.3.6.1.4.1.1271.3.4.12.3.1.6 |
cwsSystemSiteAddressThe street address of the site.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.3.1.7 |
cwsSystemGroupTableWaveserver system group attributes. SEQUENCE OF CwsSystemGroupEntry .1.3.6.1.4.1.1271.3.4.12.4 |
cwsSystemGroupEntryEntry for cwsSystemGroupTable. CwsSystemGroupEntry .1.3.6.1.4.1.1271.3.4.12.4.1 |
cwsSystemGroupTableSnmpKeyUnique key for cwsSystemGroup Integer32 .1.3.6.1.4.1.1271.3.4.12.4.1.1 |
cwsSystemGroupIdAn integer to uniquely identify a group of Waveservers within a site.rw Unsigned32 .1.3.6.1.4.1.1271.3.4.12.4.1.2 |
cwsSystemGroupNameA name for the group of Waveservers.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.4.1.3 |
cwsSystemGroupDescriptionA description for the group of Waveservers.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.4.1.4 |
cwsSystemMemberTableWaveserver system member attributes. SEQUENCE OF CwsSystemMemberEntry .1.3.6.1.4.1.1271.3.4.12.5 |
cwsSystemMemberEntryEntry for cwsSystemMemberTable. CwsSystemMemberEntry .1.3.6.1.4.1.1271.3.4.12.5.1 |
cwsSystemMemberTableSnmpKeyUnique key for cwsSystemMember Integer32 .1.3.6.1.4.1.1271.3.4.12.5.1.1 |
cwsSystemMemberIdAn integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently.rw Unsigned32 .1.3.6.1.4.1.1271.3.4.12.5.1.2 |
cwsSystemMemberNameA name for the Waveserver chassis.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.5.1.3 |
cwsSystemMemberDescriptionA description for the Waveserver chassis.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.5.1.4 |
cwsSystemMemberFrameIdentificationA description to identify the location of the Waveserver chassis within the data center. For example, the building, floor, aisle, frame number, etc.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.5.1.5 |
cwsSystemMemberRackUnitNumberA logical identifier for the Waveservers location within the frame or rack. For example, the device at the top could be labelled unit 1.rw Unsigned32 .1.3.6.1.4.1.1271.3.4.12.5.1.6 |
cwsSystemHostNameTableWaveserver system host name attributes. SEQUENCE OF CwsSystemHostNameEntry .1.3.6.1.4.1.1271.3.4.12.6 |
cwsSystemHostNameEntryEntry for cwsSystemHostNameTable. CwsSystemHostNameEntry .1.3.6.1.4.1.1271.3.4.12.6.1 |
cwsSystemHostNameTableSnmpKeyUnique key for cwsSystemHostName Integer32 .1.3.6.1.4.1.1271.3.4.12.6.1.1 |
cwsSystemHostNameCurrentHostNameCurrent host name.ro StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.6.1.2 |
cwsSystemHostNameConfigHostNameUser configured host name.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.6.1.3 |
cwsSystemHostNameDhcpHostNameDHCP Host name.ro StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.6.1.4 |
cwsSystemTimeConfigTableWaveserver system time configuration attributes. SEQUENCE OF CwsSystemTimeConfigEntry .1.3.6.1.4.1.1271.3.4.12.7 |
cwsSystemTimeConfigEntryEntry for cwsSystemTimeConfigTable. CwsSystemTimeConfigEntry .1.3.6.1.4.1.1271.3.4.12.7.1 |
cwsSystemTimeConfigTableSnmpKeyUnique key for cwsSystemTimeConfig Integer32 .1.3.6.1.4.1.1271.3.4.12.7.1.1 |
cwsSystemTimeConfigDateDate: must be in format: yyyy-mm-dd, or yy-mm-dd, or mm-dd.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.7.1.2 |
cwsSystemTimeConfigTimeTime: must be in format: hh:mm:ssrw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.7.1.3 |
cwsSystemTimeConfigTimeOffsetSystem time-offset from UTC in seconds.rw Decimal32Len2 .1.3.6.1.4.1.1271.3.4.12.7.1.4 |
cwsSystemTimeConfigTimeStampSystem time stamp format: local time or UTC time.rw Enumeration .1.3.6.1.4.1.1271.3.4.12.7.1.5 |
cwsSystemTimeConfigLocalDateTimeLocal date and time Timero OCTET STRING .1.3.6.1.4.1.1271.3.4.12.7.1.6 |
cwsSystemTimeConfigCoordinatedUniversalTimeUTC date and time Timero OCTET STRING .1.3.6.1.4.1.1271.3.4.12.7.1.7 |
cwsSystemTimeConfigSystemUptimeTime since last reboot, in format: xxxd xxh xxm xxsro OCTET STRING .1.3.6.1.4.1.1271.3.4.12.7.1.8 |
cwsSystemServerConfigTableWaveserver system server configuration attributes. SEQUENCE OF CwsSystemServerConfigEntry .1.3.6.1.4.1.1271.3.4.12.8 |
cwsSystemServerConfigEntryEntry for cwsSystemServerConfigTable. CwsSystemServerConfigEntry .1.3.6.1.4.1.1271.3.4.12.8.1 |
cwsSystemServerConfigTableSnmpKeyUnique key for cwsSystemServerConfig Integer32 .1.3.6.1.4.1.1271.3.4.12.8.1.1 |
cwsSystemServerConfigSftpServerStateIndicate whether SFTP server is enabled.rw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.8.1.2 |
cwsSystemServerConfigWebServerStateIndicate whether web server is enabled, HTTPS only.rw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.8.1.3 |
cwsSystemServerConfigNetconfServerStateIndicate whether netconf server is enabled.rw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.8.1.4 |
cwsSystemServerConfigRestconfServerStateIndicate whether RESTCONF server is enabled, HTTPS only.rw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.8.1.5 |
cwsSystemXftpConfigTableWaveserver system XFTP configuration attributes. SEQUENCE OF CwsSystemXftpConfigEntry .1.3.6.1.4.1.1271.3.4.12.9 |
cwsSystemXftpConfigEntryEntry for cwsSystemXftpConfigTable. CwsSystemXftpConfigEntry .1.3.6.1.4.1.1271.3.4.12.9.1 |
cwsSystemXftpConfigTableSnmpKeyUnique key for cwsSystemXftpConfig Integer32 .1.3.6.1.4.1.1271.3.4.12.9.1.1 |
cwsSystemXftpConfigModeXFTP mode: FTP, SFTP, or TFTPro Enumeration .1.3.6.1.4.1.1271.3.4.12.9.1.2 |
cwsSystemTftpTableWaveserver system TFTP configuration. SEQUENCE OF CwsSystemTftpEntry .1.3.6.1.4.1.1271.3.4.12.10 |
cwsSystemTftpEntryEntry for cwsSystemTftpTable. CwsSystemTftpEntry .1.3.6.1.4.1.1271.3.4.12.10.1 |
cwsSystemTftpTableSnmpKeyUnique key for cwsSystemTftp Integer32 .1.3.6.1.4.1.1271.3.4.12.10.1.1 |
cwsSystemTftpConfigHostNameTFTP host name configured by user.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.10.1.2 |
cwsSystemTftpDhcpHostNameTFTP DHCP host name.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.10.1.3 |
cwsSystemTftpCurrentHostNameTFTP current host name.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.10.1.4 |
cwsSystemFtpTableWaveserver system FTP configuration. SEQUENCE OF CwsSystemFtpEntry .1.3.6.1.4.1.1271.3.4.12.11 |
cwsSystemFtpEntryEntry for cwsSystemFtpTable. CwsSystemFtpEntry .1.3.6.1.4.1.1271.3.4.12.11.1 |
cwsSystemFtpTableSnmpKeyUnique key for cwsSystemFtp Integer32 .1.3.6.1.4.1.1271.3.4.12.11.1.1 |
cwsSystemFtpHostNameFTP host name configured by user.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.11.1.2 |
cwsSystemFtpUserNameFTP user name.rw StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.11.1.3 |
cwsSystemFtpPasswordFTP password string.rw StringMaxl128 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.11.1.4 |
cwsSystemFtpSecretFTP secret string.rw StringMaxl256 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.11.1.5 |
cwsSystemSftpTableWaveserver system SFTP configuration. SEQUENCE OF CwsSystemSftpEntry .1.3.6.1.4.1.1271.3.4.12.12 |
cwsSystemSftpEntryEntry for cwsSystemSftpTable. CwsSystemSftpEntry .1.3.6.1.4.1.1271.3.4.12.12.1 |
cwsSystemSftpTableSnmpKeyUnique key for cwsSystemSftp Integer32 .1.3.6.1.4.1.1271.3.4.12.12.1.1 |
cwsSystemSftpHostNameSFTP host name configured by user.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.12.1.2 |
cwsSystemSftpUserNameSFTP user name.rw StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.12.1.3 |
cwsSystemSftpPasswordSFTP password string.rw StringMaxl128 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.12.1.4 |
cwsSystemSftpSecretSFTP secret string.rw StringMaxl256 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.12.1.5 |
cwsSystemGlobalProvisioningTableWaveserver system global provisioning attributes. SEQUENCE OF CwsSystemGlobalProvisioningEntry .1.3.6.1.4.1.1271.3.4.12.13 |
cwsSystemGlobalProvisioningEntryEntry for cwsSystemGlobalProvisioningTable. CwsSystemGlobalProvisioningEntry .1.3.6.1.4.1.1271.3.4.12.13.1 |
cwsSystemGlobalProvisioningTableSnmpKeyUnique key for cwsSystemGlobalProvisioning Integer32 .1.3.6.1.4.1.1271.3.4.12.13.1.1 |
cwsSystemGlobalProvisioningLowPowerModeLow power mode is enabled or disabledrw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.13.1.2 |
cwsSystemGlobalProvisioningLampTestEnable to initiate chassis level lamp test. Disable to end the test.rwobsolete EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.13.1.3 |
cwsSystemGlobalProvisioningResetToFactoryDefaultButtonIndicate whether the reset button for reset to factory default is enabled. If enabled, the reset button on the faceplate will trigger a reset to factory default settingsrwobsolete EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.13.1.4 |
cwsSystemGlobalProvisioningFcsErrorForwardingFCS error forwarding settings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.12.13.1.5 |
cwsSystemGlobalProvisioningChassisFunctionalityDescription of chassis functionality, used by MCP.rw StringMaxl16 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.13.1.6 |
cwsSystemFrontDisplayTableWaveserver system front display configuration. SEQUENCE OF CwsSystemFrontDisplayEntry .1.3.6.1.4.1.1271.3.4.12.14 |
cwsSystemFrontDisplayEntryEntry for cwsSystemFrontDisplayTable. CwsSystemFrontDisplayEntry .1.3.6.1.4.1.1271.3.4.12.14.1 |
cwsSystemFrontDisplayTableSnmpKeyUnique key for cwsSystemFrontDisplay Integer32 .1.3.6.1.4.1.1271.3.4.12.14.1.1 |
cwsSystemFrontDisplayAdminStateDisplay is enabled or disabled. When the display is disabled, it will be turned off and will not be woken up by pressing on the faceplate navigation buttonsrw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.14.1.2 |
cwsSystemFrontDisplayScreensaverStateScreensaver is enabled or disabled. When the screensaver is enabled, the LED display on the faceplate will be automatically turned off after N minutes of inactivity. If an input button is pressed, it will turn the display back on. The length of the screensaver idle time is controlled by the screensaver-timeout parameter.rw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.14.1.3 |
cwsSystemFrontDisplayScreensaverTimeoutNumber of minutes before screensaver activates. The screensaver can be disabled via the display-screensaver-state attribute. The display can be completely disabled via the display-admin-state attribute.rw Unsigned32 .1.3.6.1.4.1.1271.3.4.12.14.1.4 |
cwsSystemFrontDisplayInputButtonStateEnable or disable display input control.rw EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.14.1.5 |
cwsSystemFrontDisplayUserMessageStateEnable or disable user message display. If a user-message has been provisioned, enabling it via this parameter will display that message on the LED display. This leaf is now obsolete in WS 1.5rwobsolete EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.14.1.6 |
cwsSystemFrontDisplayUserMessageMessage to be shown on the display. This is a custom message to be displayed on the LED display.rw OCTET STRING .1.3.6.1.4.1.1271.3.4.12.14.1.7 |
cwsSystemLineConfigTableWaveserver system line configuration. SEQUENCE OF CwsSystemLineConfigEntry .1.3.6.1.4.1.1271.3.4.12.15 |
cwsSystemLineConfigEntryEntry for cwsSystemLineConfigTable. CwsSystemLineConfigEntry .1.3.6.1.4.1.1271.3.4.12.15.1 |
cwsSystemLineConfigTableSnmpKeyUnique key for cwsSystemLineConfig Integer32 .1.3.6.1.4.1.1271.3.4.12.15.1.1 |
cwsSystemLineConfigBandPlanBand Plan. The band plan is a way of selecting a mapping between channels and wavelengths/frequencies. The selected band plan should correspond to the band plan on the line system. The band plan is used to automatically select the next wavelength or frequency for newly installed Waveservers based on the member-id assigned to the device. Modifying Band plan will have an effect on PTP attributes. Software will automatically assign a per-defined PTP Wavelength, Frequency, and Channel combination from selected Band Plan. Note that the automatic reassignment will only occur when a valid Band Plan is already provisioned (i.e. existing Band Plan is not equal to None), the existing PTP Wavelength, Frequency, and Channel have value of zero, and user provisions Member ID from 0 to a non-zero value (i.e. from 'uncommisioned' state to 'commissioned' state) that's within the maximum wavelength allocation specified in the Band Plan (each Member ID reserves two wavelengths) . Software shall automatically update existing channel number provisioning when user changes Band Plan provisioning. Channel number shall be set to 0 if provisioned wavelength/frequency is not found in the new Band Plan or the new Band Plan equals to None.rw BandplanEnum .1.3.6.1.4.1.1271.3.4.12.15.1.2 |
cwsSystemLineConfigLineProtectionLine protection settings. If line protection is enabled, this means that the photonic line the Waveserver is connected to has protection enabled. In the event of a line side fault, the protection card on the line side will select the protection path and the modems will reacquire the signal on the alternate path. While the switch is occuring, link state messaging will be disabled to the clients so that the connected devices do not attempt a switch or a restoration.rw LineProtectionEnum .1.3.6.1.4.1.1271.3.4.12.15.1.3 |
cwsSystemLampFlashTestTableWaveserver lamp flash test attributes. SEQUENCE OF CwsSystemLampFlashTestEntry .1.3.6.1.4.1.1271.3.4.12.16 |
cwsSystemLampFlashTestEntryEntry for cwsSystemLampFlashTestTable. CwsSystemLampFlashTestEntry .1.3.6.1.4.1.1271.3.4.12.16.1 |
cwsSystemLampFlashTestTableSnmpKeyUnique key for cwsSystemLampFlashTest Integer32 .1.3.6.1.4.1.1271.3.4.12.16.1.1 |
cwsSystemLampFlashTestOperationalStateLamp flash test operational state. It reflects whether the lamp flash test is enabled or disabled.ro EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.16.1.2 |
cwsSystemLampFlashTestModeLamp mode selection. The default mode is flash. It is the only mode supportedro LampModeEnum .1.3.6.1.4.1.1271.3.4.12.16.1.3 |
cwsSystemLampFlashTestTargetTypeLamp testing target type. It can be chassis or port. The default type is chassis. When the target-type is port, the port list should be set for the selected ports to be tested.rw LampTargetTypeEnum .1.3.6.1.4.1.1271.3.4.12.16.1.4 |
cwsSystemLampFlashTestTimeoutThe number of minutes the lamp flash testing will be operating when enabled. The default timeout value is 30 minutesrw Unsigned32 .1.3.6.1.4.1.1271.3.4.12.16.1.5 |
cwsSystemLampFlashTestPortsPorts selected for lamp flash test. The bits in this leaf represent port number from 1 to 12, starting from position 1. When target-type is port and lamp-flash-test is enabled, the selected ports (bit is set) will have its lamp operate in the mode set. When the target-type is chassis, this leaf should not be specified or should be empty.rw Bits .1.3.6.1.4.1.1271.3.4.12.16.1.6 |
cwsSystemRootTableWaveserver system user root configuration. SEQUENCE OF CwsSystemRootEntry .1.3.6.1.4.1.1271.3.4.12.18 |
cwsSystemRootEntryEntry for cwsSystemRootTable. CwsSystemRootEntry .1.3.6.1.4.1.1271.3.4.12.18.1 |
cwsSystemRootTableSnmpKeyUnique key for cwsSystemRoot Integer32 .1.3.6.1.4.1.1271.3.4.12.18.1.1 |
cwsSystemRootPasswordUser root password string.ro StringMaxl128 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.18.1.2 |
cwsSystemScpTableWaveserver system SCP configuration. SEQUENCE OF CwsSystemScpEntry .1.3.6.1.4.1.1271.3.4.12.19 |
cwsSystemScpEntryEntry for cwsSystemScpTable. CwsSystemScpEntry .1.3.6.1.4.1.1271.3.4.12.19.1 |
cwsSystemScpTableSnmpKeyUnique key for cwsSystemScp Integer32 .1.3.6.1.4.1.1271.3.4.12.19.1.1 |
cwsSystemScpHostNameSCP host name configured by user.rw StringMaxl64 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.19.1.2 |
cwsSystemScpUserNameSCP user name.rw StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.19.1.3 |
cwsSystemScpPasswordSCP password string.rw StringMaxl128 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.19.1.4 |
cwsSystemScpSecretSCP secret string.rw StringMaxl256 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.19.1.5 |
cwsSystemDhcpTableWaveserver DHCP client configuration attributes. SEQUENCE OF CwsSystemDhcpEntry .1.3.6.1.4.1.1271.3.4.12.21 |
cwsSystemDhcpEntryEntry for cwsSystemDhcpTable. CwsSystemDhcpEntry .1.3.6.1.4.1.1271.3.4.12.21.1 |
cwsSystemDhcpTableSnmpKeyUnique key for cwsSystemDhcp Integer32 .1.3.6.1.4.1.1271.3.4.12.21.1.1 |
cwsSystemDhcpAdminStateDHCP Client Administrative Statero EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.12.21.1.2 |