CIENA-WS-PTP-PLUGGABLE-MIB
The CIENA-WS-PTP-PLUGGABLE-MIB monitors and manages PTP (Precision Time Protocol) signal parameters within Ciena pluggable transceivers installed at client ports. This module tracks the automatically provisioned PTP session states and signal integrity metrics specific to the XCVR hardware to ensure synchronization accuracy.
Imported Objects
Objects
11 total| Object Name |
|---|
cienaWsPtpPluggableMIBThis YANG module defines Ciena's XCVR ptp pluggable specific data. It augments the ciena-ws-ptp module. The pluggable PTP is the signal carried by the pluggable transceiver at a client port. Automatically provisioned at transceiver installation. MODULE-IDENTITY .1.3.6.1.4.1.1271.3.4.10 |
cienaWsPtpPluggableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.10.1 |
cienaWsPtpPluggableConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.10.2 |
cienaWsPtpPluggableGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.10.2.1 |
cienaWsPtpPluggableGroupConformance Group Unknown .1.3.6.1.4.1.1271.3.4.10.2.1.1 |
cienaWsPtpPluggableCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.10.2.2 |
cienaWsPtpPluggableComplianceCompliance Unknown .1.3.6.1.4.1.1271.3.4.10.2.2.1 |
cwsPtpAugPtpPluggableTxStatusTableNone SEQUENCE OF CwsPtpAugPtpPluggableTxStatusEntry .1.3.6.1.4.1.1271.3.4.10.3 |
cwsPtpAugPtpPluggableTxStatusEntryEntry for cwsPtpAugPtpPluggableTxStatusTable. CwsPtpAugPtpPluggableTxStatusEntry .1.3.6.1.4.1.1271.3.4.10.3.1 |
cwsPtpPluggableTxStatusLossOfSignalTx Loss of Signal. QSFP28 only attribute.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.10.3.1.1 |
cwsPtpPluggableTxStatusLossOfLockTx Loss of Lock.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.10.3.1.2 |
CIENA-WS-PTP-PLUGGABLE-MIB Technical Reference Overview
The CIENA-WS-PTP-PLUGGABLE-MIB SNMP MIB module published by Ciena defines 11 managed OID objects, including 4 scalar/column metrics, 1 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.3.4.10. Key tabular structures include cwsPtpAugPtpPluggableTxStatusTable.
Key OID Definitions in CIENA-WS-PTP-PLUGGABLE-MIB
.1.3.6.1.4.1.1271.3.4.10.3None
.1.3.6.1.4.1.1271.3.4.10.2.2.1Compliance
.1.3.6.1.4.1.1271.3.4.10.2.1.1Conformance Group
.1.3.6.1.4.1.1271.3.4.10.3.1Entry for cwsPtpAugPtpPluggableTxStatusTable.
.1.3.6.1.4.1.1271.3.4.10.3.1.2Tx Loss of Lock.
.1.3.6.1.4.1.1271.3.4.10.3.1.1Tx Loss of Signal. QSFP28 only attribute.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.