Home/Catalog/CIENA-WS-PTP-MODEM-MIB

CIENA-WS-PTP-MODEM-MIB

AI MIB Summary

The CIENA-WS-PTP-MODEM-MIB module monitors and manages Physical Transport Protocol (PTP) signal parameters and modem-transceiver states on Ciena Waveserver line ports, specifically tracking automatically provisioned signal attributes during system initialization.

This module defines modem-transceiver PTP data for the Waveserver. It augments the ciena-ws-ptp module. The PTP model is the signal carried by the modem transceiver at a line port. Automatically provisioned at system turn-up.
Main OID:
cienaWsPtpModemMIB.1.3.6.1.4.1.1271.3.4.9
185
Objects
Active
Status
6
Dependencies

Imported Objects

CIENA-WS-MIB
CIENA-WS-PTP-MIB
CIENA-WS-TYPEDEFS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

185 total
Object Name
cienaWsPtpModemMIBThis module defines modem-transceiver PTP data for the Waveserver. It augments the ciena-ws-ptp module. The PTP model is the signal carried by the modem transceiver at a line port. Automatically provisioned at system turn-up.
MODULE-IDENTITY
.1.3.6.1.4.1.1271.3.4.9
cienaWsPtpModemObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.3.4.9.1
cienaWsPtpModemConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.3.4.9.2
cienaWsPtpModemGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.3.4.9.2.1
cienaWsPtpModemGroupConformance Group
Unknown
.1.3.6.1.4.1.1271.3.4.9.2.1.1
cienaWsPtpModemCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.3.4.9.2.2
cienaWsPtpModemComplianceCompliance
Unknown
.1.3.6.1.4.1.1271.3.4.9.2.2.1
cwsPtpAugPtpModemTransmitterTableNone
SEQUENCE OF CwsPtpAugPtpModemTransmitterEntry
.1.3.6.1.4.1.1271.3.4.9.3
cwsPtpAugPtpModemTransmitterEntryEntry for cwsPtpAugPtpModemTransmitterTable.
CwsPtpAugPtpModemTransmitterEntry
.1.3.6.1.4.1.1271.3.4.9.3.1
cwsPtpModemTransmitterLineSystemChannelNumberLine System Channel Number. Channel cannot be modified while Admin State is enabled (except when changing from zero value to another value). Channel cannot be provisioned if System Band Plan field is set to None. Channel cannot be modified in the same operation as Wavelength, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Channel is modified, Wavelength and Frequency will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. Software shall automatically update existing channel number provisioning when user changes Band Plan provisioning. Channel number shall be set to 0 if provisioned wavelength/frequency is not found in the new Band Plan or the new Band Plan equals to None.ro
ModemChannel (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.3.1.1
cwsPtpModemFrequencyTableNone
SEQUENCE OF CwsPtpModemFrequencyEntry
.1.3.6.1.4.1.1271.3.4.9.4
cwsPtpModemFrequencyEntryEntry for cwsPtpModemFrequencyTable.
CwsPtpModemFrequencyEntry
.1.3.6.1.4.1.1271.3.4.9.4.1
cwsPtpModemFrequencyTableSnmpKeyUnique key for cwsPtpModemFrequency
Integer32
.1.3.6.1.4.1.1271.3.4.9.4.1.1
cwsPtpModemFrequencyValueModem Frequency value (GHz). Frequency cannot be modified while Admin State is enabled (except when changing from zero value to another value). Frequency cannot be modified in the same operation as Wavelength, Channel, and Wavelength Spacing, only one of those fields may be modified in a single operation. If Frequency is modified, Wavelength and Channel will be automatically updated to valid values. Modification to this field will be validated against the Wavelength Spacing field. Attempts to change to a value outside of the range will result in failure.rw
ModemFrequency (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.4.1.2
cwsPtpModemFrequencyMinValueThe Min Frequency value, in GHz.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.4.1.3
cwsPtpModemFrequencyMaxValueThe Max Frequency value, in GHz.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.4.1.4
cwsPtpModemFrequencyActualThe actual frequency value of the modem ptp. in GHz. It may or may not be equal to the configurable 'frequency/value'ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.4.1.5
cwsPtpModemPowerTableNone
SEQUENCE OF CwsPtpModemPowerEntry
.1.3.6.1.4.1.1271.3.4.9.5
cwsPtpModemPowerEntryEntry for cwsPtpModemPowerTable.
CwsPtpModemPowerEntry
.1.3.6.1.4.1.1271.3.4.9.5.1
cwsPtpModemPowerTableSnmpKeyUnique key for cwsPtpModemPower
Integer32
.1.3.6.1.4.1.1271.3.4.9.5.1.1
cwsPtpModemPowerValueThe provisioned transmit power in dBm. The range is from -16.0 (-11.0 for EDFA) to -10.0 (4.0 for EDFA). Default is -10.0rw
TxPowerLvl (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.5.1.2
cwsPtpModemPowerMinValueThe Min Power Level value, in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.5.1.3
cwsPtpModemPowerMaxValueThe Max Power Level value, in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.5.1.4
cwsPtpModemLineSystemTableModem line System related attributes.
SEQUENCE OF CwsPtpModemLineSystemEntry
.1.3.6.1.4.1.1271.3.4.9.6
cwsPtpModemLineSystemEntryEntry for cwsPtpModemLineSystemTable.
CwsPtpModemLineSystemEntry
.1.3.6.1.4.1.1271.3.4.9.6.1
cwsPtpModemLineSystemTableSnmpKeyUnique key for cwsPtpModemLineSystem
Integer32
.1.3.6.1.4.1.1271.3.4.9.6.1.1
cwsPtpModemLineSystemTypeLine system type. It can be set as coloured or colorless. Default is colouredrw
LineSysEnum (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.6.1.2
cwsPtpModemLineSystemWavelengthSpacingWavelength Spacing cannot be modified while Admin State is enabled. Wavelength Spacing cannot be modified in the same operation as Wavelength, Frequencey, and Channel, only one of those fields may be modified in a single operation. Wavelength Spacing cannot be provisioned when System Band Plan field is set to a value other than None, Wavelength Space field will also be automatically set to Flex Grid. When PTP Wavelength Spacing is changed from FlexGrid to a fixed grid (e.g. 50GHz), or from a fixed grid to another fixed grid value, if existing Wavelength and Frequency is not valid in the selected grid, their values will be set to zero. When PTP Wavelength Spacing is changed from a fixed grid (e.g. 50GHz) to FlexGrid, existing Wavelength, Frequency and Line System Channel Number remain unchanged.rw
WlSpacing (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.6.1.3
cwsPtpModemCmdTableNone
SEQUENCE OF CwsPtpModemCmdEntry
.1.3.6.1.4.1.1271.3.4.9.7
cwsPtpModemCmdEntryEntry for cwsPtpModemCmdTable.
CwsPtpModemCmdEntry
.1.3.6.1.4.1.1271.3.4.9.7.1
cwsPtpModemCmdTableSnmpKeyUnique key for cwsPtpModemCmd
Integer32
.1.3.6.1.4.1.1271.3.4.9.7.1.1
cwsPtpModemCmdSlotCMD Slot. Cannot be modified currently.rw
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.7.1.2
cwsPtpModemCmdPortInCMD Port In. Cannot be modified.rw
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.7.1.3
cwsPtpModemCmdPortOutCMD Port Out. Cannot be modified.rw
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.7.1.4
cwsPtpModemModemTableNone
SEQUENCE OF CwsPtpModemModemEntry
.1.3.6.1.4.1.1271.3.4.9.8
cwsPtpModemModemEntryEntry for cwsPtpModemModemTable.
CwsPtpModemModemEntry
.1.3.6.1.4.1.1271.3.4.9.8.1
cwsPtpModemModemTableSnmpKeyUnique key for cwsPtpModemModem
Integer32
.1.3.6.1.4.1.1271.3.4.9.8.1.1
cwsPtpModemModemChannelContentionDetectionAvoidanceTurns the channel contention detection and avoidance feature on or off. This feature is used to detect the situation where the modem port turn on a wavelength (or frequency in Gridless mode) that is in use by an existing L0 connection on a colorless network. This feature will be triggered by new wavelength/frequency provisioning and will automatically detects if the provisioned wavelength/frequency is already used. If the provisioned wavelength/frequency is already used, it declares channel contention, and then it will hold the Line port TX in a low power state (<-35 dBm) and will raise a Channel Contention alarm. This feature will also provide a mechanism to allow user to manually release the Line port TX from being held in a low power state while the channel collision declared.rw
OnOffEnum (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.8.1.2
cwsPtpModemModemPerformanceOptimizationModePerformance Optimization. It optimizes for either reach or latency. Default is reach.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.3
cwsPtpModemModemCarrierCenteringModeThis parameter is used to configure which Carrier centering mode to apply to the OTM signal. Default is mode-2.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.4
cwsPtpModemModemInterleaverModeThe Interleaver Mode. It can be set as standard or enhanced. Default is enhanced.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.5
cwsPtpModemModemRotationTo enable (on) or disable (off) Jones's rotation. Default is offrw
OnOffEnum (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.8.1.6
cwsPtpModemModemSpectralOccupancyModeSpectral Occupancy Mode. This is the optical channel spectral Occupancy parameter which supports two different kinds of waveforms: narrow and wide. Default is narrow. Narrow: Root-Raised Cosine with Alpha of 0.14. Wide: Root-Raised Cosine 0.14 convolved with Gaussian 25GHz full-width half maximum (FWHM).rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.7
cwsPtpModemModemTxPowerReductionStateThis parameter is used to enable TX blanking functionality. Default is Offrw
EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.8.1.8
cwsPtpModemModemTxReductionModeTransmit XPM reduction. It can be set as Positive, Negative or Auto. This should always be enabled (Positive). Disabling this should be done for only interworking purposes.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.9
cwsPtpModemModemTxTuningModeThis is the Tuning Mode, which can be set as performance-optimized (normal) or accelerated tuning mode. Default is performance-optimizedrw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.10
cwsPtpModemModemDifferentialEncodingThis parameter is used to configure which differential encoding mode to apply to the OTM signal. It can be set as None, Hard, Soft, Xd. Default is none.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.11
cwsPtpModemModemTxCompensationDispersionModeTx Compensation Dispersion Mode. Default is Off.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.8.1.12
cwsPtpModemModemTxCompensationDispersionValueTx compensation dispersion value range from -40000 ps/nm to 85000 ps/nm. Default is 0rw
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.8.1.13
cwsPtpModemModemFastReceiverRecoveryStateWhether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values. This leaf is now obsolete in WS 1.3roobsolete
EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.8.1.14
cwsPtpModemModemLaserCenteringRangeThis parameter is used to configure the laser centering range.rw
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.8.1.15
cwsPtpModemPerformanceStatisticsTableNone
SEQUENCE OF CwsPtpModemPerformanceStatisticsEntry
.1.3.6.1.4.1.1271.3.4.9.9
cwsPtpModemPerformanceStatisticsEntryEntry for cwsPtpModemPerformanceStatisticsTable.
CwsPtpModemPerformanceStatisticsEntry
.1.3.6.1.4.1.1271.3.4.9.9.1
cwsPtpModemPerformanceStatisticsTableSnmpKeyUnique key for cwsPtpModemPerformanceStatistics
Integer32
.1.3.6.1.4.1.1271.3.4.9.9.1.1
cwsPtpModemPerformanceStatisticsSecondsSinceLastClearNumber of seconds since last statistics clear.ro
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.9.1.2
cwsPtpModemPerformanceStatisticsFecUncorrectedBlockCountUncorrected FEC block count.ro
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.9.1.3
cwsPtpModemPerformanceStatisticsHighCorrectionCountSecondsHigh correction count seconds.ro
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.9.1.4
cwsPtpModemPreFecBerTableNone
SEQUENCE OF CwsPtpModemPreFecBerEntry
.1.3.6.1.4.1.1271.3.4.9.10
cwsPtpModemPreFecBerEntryEntry for cwsPtpModemPreFecBerTable.
CwsPtpModemPreFecBerEntry
.1.3.6.1.4.1.1271.3.4.9.10.1
cwsPtpModemPreFecBerTableSnmpKeyUnique key for cwsPtpModemPreFecBer
Integer32
.1.3.6.1.4.1.1271.3.4.9.10.1.1
cwsPtpModemPreFecBerActualPre-FEC BER Actual Value, in scientific notation format. If the Port is down or invalid, this field will not be present.ro
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.10.1.2
cwsPtpModemPreFecBerMaxMax Pre-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present.ro
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.10.1.3
cwsPtpModemPreFecBerMinMin Pre-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present. This attribute is obsolete in WS 1.3roobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.10.1.4
cwsPtpModemPreFecBerAverageAverage Pre-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present. This attribute is obsolete in WS 1.3roobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.10.1.5
cwsPtpModemPostFecBerTableNone
SEQUENCE OF CwsPtpModemPostFecBerEntry
.1.3.6.1.4.1.1271.3.4.9.11
cwsPtpModemPostFecBerEntryEntry for cwsPtpModemPostFecBerTable.
CwsPtpModemPostFecBerEntry
.1.3.6.1.4.1.1271.3.4.9.11.1
cwsPtpModemPostFecBerTableSnmpKeyUnique key for cwsPtpModemPostFecBer
Integer32
.1.3.6.1.4.1.1271.3.4.9.11.1.1
cwsPtpModemPostFecBerActualPost-FEC BER Actual value, in scientific notation format. If the Port is down or invalid, this field will not be present.ro
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.11.1.2
cwsPtpModemPostFecBerMaxMax Post-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present. This attribute is obsolete in WS 1.3roobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.11.1.3
cwsPtpModemPostFecBerMinMin Post-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present. This attribute is obsolete in WS 1.3roobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.11.1.4
cwsPtpModemPostFecBerAverageAverage Post-FEC BER value, in scientific notation format. If the Port is down or invalid, this field will not be present. This attribute is obsolete in WS 1.3roobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.11.1.5
cwsPtpModemQFactorTableNone
SEQUENCE OF CwsPtpModemQFactorEntry
.1.3.6.1.4.1.1271.3.4.9.12
cwsPtpModemQFactorEntryEntry for cwsPtpModemQFactorTable.
CwsPtpModemQFactorEntry
.1.3.6.1.4.1.1271.3.4.9.12.1
cwsPtpModemQFactorTableSnmpKeyUnique key for cwsPtpModemQFactor
Integer32
.1.3.6.1.4.1.1271.3.4.9.12.1.1
cwsPtpModemQFactorActualQ-factor actual value. If this value is invalid, this field will not be present.ro
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.12.1.2
cwsPtpModemQFactorMaxMax Q-factor value. If this value is invalid, this field will not be present.ro
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.12.1.3
cwsPtpModemQFactorMinMin Q-factor value. If this value is invalid, this field will not be present.ro
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.12.1.4
cwsPtpModemQFactorAverageAverage Q-factor value. If this value is invalid, this field will not be present. This attribute is obsolete in WS 1.3roobsolete
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.12.1.5
cwsPtpModemFecFrameErrorCountTableNone
SEQUENCE OF CwsPtpModemFecFrameErrorCountEntry
.1.3.6.1.4.1.1271.3.4.9.13
cwsPtpModemFecFrameErrorCountEntryEntry for cwsPtpModemFecFrameErrorCountTable.
CwsPtpModemFecFrameErrorCountEntry
.1.3.6.1.4.1.1271.3.4.9.13.1
cwsPtpModemFecFrameErrorCountTableSnmpKeyUnique key for cwsPtpModemFecFrameErrorCount
Integer32
.1.3.6.1.4.1.1271.3.4.9.13.1.1
cwsPtpModemFecFrameErrorCountValueFEC Frame Error Count Value.ro
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.13.1.2
cwsPtpModemFecFrameErrorCountSecondsFEC Frame Error Count Seconds.ro
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.13.1.3
cwsPtpModemModemprefecsignalfailalarmTableNone
SEQUENCE OF CwsPtpModemModemprefecsignalfailalarmEntry
.1.3.6.1.4.1.1271.3.4.9.14
cwsPtpModemModemprefecsignalfailalarmEntryEntry for cwsPtpModemModemprefecsignalfailalarmTable.
CwsPtpModemModemprefecsignalfailalarmEntry
.1.3.6.1.4.1.1271.3.4.9.14.1
cwsPtpModemModemprefecsignalfailalarmTableSnmpKeyUnique key for cwsPtpModemModemprefecsignalfailalarm
Integer32
.1.3.6.1.4.1.1271.3.4.9.14.1.1
cwsPtpModemModemprefecsignalfailalarmActiveIf OTU4 Pre-FEC Signal Fail alarm has been raised.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.14.1.2
cwsPtpModemModemprefecsignalfailalarmthresholdTableNone
SEQUENCE OF CwsPtpModemModemprefecsignalfailalarmthresholdEntry
.1.3.6.1.4.1.1271.3.4.9.15
cwsPtpModemModemprefecsignalfailalarmthresholdEntryEntry for cwsPtpModemModemprefecsignalfailalarmthresholdTable.
CwsPtpModemModemprefecsignalfailalarmthresholdEntry
.1.3.6.1.4.1.1271.3.4.9.15.1
cwsPtpModemModemprefecsignalfailalarmthresholdTableSnmpKeyUnique key for cwsPtpModemModemprefecsignalfailalarmthreshold
Integer32
.1.3.6.1.4.1.1271.3.4.9.15.1.1
cwsPtpModemModemprefecsignalfailalarmthresholdDbqPre-FEC Signal Fail Threshold, in dBQ.ro
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.15.1.2
cwsPtpModemModemprefecsignaldegradealarmTableNone
SEQUENCE OF CwsPtpModemModemprefecsignaldegradealarmEntry
.1.3.6.1.4.1.1271.3.4.9.16
cwsPtpModemModemprefecsignaldegradealarmEntryEntry for cwsPtpModemModemprefecsignaldegradealarmTable.
CwsPtpModemModemprefecsignaldegradealarmEntry
.1.3.6.1.4.1.1271.3.4.9.16.1
cwsPtpModemModemprefecsignaldegradealarmTableSnmpKeyUnique key for cwsPtpModemModemprefecsignaldegradealarm
Integer32
.1.3.6.1.4.1.1271.3.4.9.16.1.1
cwsPtpModemModemprefecsignaldegradealarmActiveIf OTU4 Pre-FEC Signal Degrade alarm has been raised.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.16.1.2
cwsPtpModemModemprefecsignaldegradealarmthresholdTableNone
SEQUENCE OF CwsPtpModemModemprefecsignaldegradealarmthresholdEntry
.1.3.6.1.4.1.1271.3.4.9.17
cwsPtpModemModemprefecsignaldegradealarmthresholdEntryEntry for cwsPtpModemModemprefecsignaldegradealarmthresholdTable.
CwsPtpModemModemprefecsignaldegradealarmthresholdEntry
.1.3.6.1.4.1.1271.3.4.9.17.1
cwsPtpModemModemprefecsignaldegradealarmthresholdTableSnmpKeyUnique key for cwsPtpModemModemprefecsignaldegradealarmthreshold
Integer32
.1.3.6.1.4.1.1271.3.4.9.17.1.1
cwsPtpModemModemprefecsignaldegradealarmthresholdDbqPre-FEC Signal Degrade Threshold, in dBQ.ro
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.17.1.2
cwsPtpModemPreFecSignalFailTableNoneobsolete
SEQUENCE OF CwsPtpModemPreFecSignalFailEntry
.1.3.6.1.4.1.1271.3.4.9.18
cwsPtpModemPreFecSignalFailEntryEntry for cwsPtpModemPreFecSignalFailTable.obsolete
CwsPtpModemPreFecSignalFailEntry
.1.3.6.1.4.1.1271.3.4.9.18.1
cwsPtpModemPreFecSignalFailTableSnmpKeyUnique key for cwsPtpModemPreFecSignalFail
Integer32
.1.3.6.1.4.1.1271.3.4.9.18.1.1
cwsPtpModemPreFecSignalFailFailStatusIf OTU4 Pre-FEC Signal Fail has been raised.roobsolete
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.18.1.2
cwsPtpModemModemprefecsignalfailthresholdTableNoneobsolete
SEQUENCE OF CwsPtpModemModemprefecsignalfailthresholdEntry
.1.3.6.1.4.1.1271.3.4.9.19
cwsPtpModemModemprefecsignalfailthresholdEntryEntry for cwsPtpModemModemprefecsignalfailthresholdTable.obsolete
CwsPtpModemModemprefecsignalfailthresholdEntry
.1.3.6.1.4.1.1271.3.4.9.19.1
cwsPtpModemModemprefecsignalfailthresholdTableSnmpKeyUnique key for cwsPtpModemModemprefecsignalfailthreshold
Integer32
.1.3.6.1.4.1.1271.3.4.9.19.1.1
cwsPtpModemModemprefecsignalfailthresholdDbqPre-FEC Signal Fail Threshold, in dBQ.rwobsolete
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.19.1.2
cwsPtpModemModemprefecsignalfailthresholdBerPre-FEC Signal Fail Threshold BER, in scientific notation format. If the Port is down or invalid, this field will not be present.rwobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.19.1.3
cwsPtpModemPreFecSignalDegradeTableNoneobsolete
SEQUENCE OF CwsPtpModemPreFecSignalDegradeEntry
.1.3.6.1.4.1.1271.3.4.9.20
cwsPtpModemPreFecSignalDegradeEntryEntry for cwsPtpModemPreFecSignalDegradeTable.obsolete
CwsPtpModemPreFecSignalDegradeEntry
.1.3.6.1.4.1.1271.3.4.9.20.1
cwsPtpModemPreFecSignalDegradeTableSnmpKeyUnique key for cwsPtpModemPreFecSignalDegrade
Integer32
.1.3.6.1.4.1.1271.3.4.9.20.1.1
cwsPtpModemPreFecSignalDegradeDegradeStatusIf OTU4 Pre-FEC Signal Degrade has been raised.roobsolete
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.20.1.2
cwsPtpModemModemprefecsignaldegradethresholdTableNoneobsolete
SEQUENCE OF CwsPtpModemModemprefecsignaldegradethresholdEntry
.1.3.6.1.4.1.1271.3.4.9.21
cwsPtpModemModemprefecsignaldegradethresholdEntryEntry for cwsPtpModemModemprefecsignaldegradethresholdTable.obsolete
CwsPtpModemModemprefecsignaldegradethresholdEntry
.1.3.6.1.4.1.1271.3.4.9.21.1
cwsPtpModemModemprefecsignaldegradethresholdTableSnmpKeyUnique key for cwsPtpModemModemprefecsignaldegradethreshold
Integer32
.1.3.6.1.4.1.1271.3.4.9.21.1.1
cwsPtpModemModemprefecsignaldegradethresholdDbqPre-FEC Signal Degrade Threshold, in dBQ.rwobsolete
Decimal2Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.21.1.2
cwsPtpModemModemprefecsignaldegradethresholdBerPre-FEC Signal Degrade Threshold BER, in scientific notation format. If the Port is down or invalid, this field will not be present.rwobsolete
StringSci (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.21.1.3
cwsPtpModemRxlinkdispersionTableNone
SEQUENCE OF CwsPtpModemRxlinkdispersionEntry
.1.3.6.1.4.1.1271.3.4.9.22
cwsPtpModemRxlinkdispersionEntryEntry for cwsPtpModemRxlinkdispersionTable.
CwsPtpModemRxlinkdispersionEntry
.1.3.6.1.4.1.1271.3.4.9.22.1
cwsPtpModemRxlinkdispersionTableSnmpKeyUnique key for cwsPtpModemRxlinkdispersion
Integer32
.1.3.6.1.4.1.1271.3.4.9.22.1.1
cwsPtpModemRxlinkdispersionTotalTotal Rx Link Dispersion, unit is ps/nm.ro
Integer32
.1.3.6.1.4.1.1271.3.4.9.22.1.2
cwsPtpModemRxlinkdispersionCompensationRx Compensation Dispersion, unit is ps/nm.ro
Integer32
.1.3.6.1.4.1.1271.3.4.9.22.1.3
cwsPtpModemTxlinkdispersionTableNone
SEQUENCE OF CwsPtpModemTxlinkdispersionEntry
.1.3.6.1.4.1.1271.3.4.9.23
cwsPtpModemTxlinkdispersionEntryEntry for cwsPtpModemTxlinkdispersionTable.
CwsPtpModemTxlinkdispersionEntry
.1.3.6.1.4.1.1271.3.4.9.23.1
cwsPtpModemTxlinkdispersionTableSnmpKeyUnique key for cwsPtpModemTxlinkdispersion
Integer32
.1.3.6.1.4.1.1271.3.4.9.23.1.1
cwsPtpModemTxlinkdispersionTotalTotal Tx Link Dispersion, unit is ps/nm.ro
Integer32
.1.3.6.1.4.1.1271.3.4.9.23.1.2
cwsPtpModemTxlinkdispersionActualTx Actual Link Dispersion, unit is ps/nm.ro
Integer32
.1.3.6.1.4.1.1271.3.4.9.23.1.3
cwsPtpModemDifferentialGroupDelayTableNone
SEQUENCE OF CwsPtpModemDifferentialGroupDelayEntry
.1.3.6.1.4.1.1271.3.4.9.24
cwsPtpModemDifferentialGroupDelayEntryEntry for cwsPtpModemDifferentialGroupDelayTable.
CwsPtpModemDifferentialGroupDelayEntry
.1.3.6.1.4.1.1271.3.4.9.24.1
cwsPtpModemDifferentialGroupDelayTableSnmpKeyUnique key for cwsPtpModemDifferentialGroupDelay
Integer32
.1.3.6.1.4.1.1271.3.4.9.24.1.1
cwsPtpModemDifferentialGroupDelayMeanSupportedMean Supported Differential Group Delay, unit is ps.ro
Integer32
.1.3.6.1.4.1.1271.3.4.9.24.1.2
cwsPtpModemDifferentialGroupDelayEstimatedInstanceEstimated Instance of Differential Group Delay, unit is ps.ro
Integer32
.1.3.6.1.4.1.1271.3.4.9.24.1.3
cwsPtpModemFastRxRecoveryTableFast receiver recovery related leafs and attributes.
SEQUENCE OF CwsPtpModemFastRxRecoveryEntry
.1.3.6.1.4.1.1271.3.4.9.25
cwsPtpModemFastRxRecoveryEntryEntry for cwsPtpModemFastRxRecoveryTable.
CwsPtpModemFastRxRecoveryEntry
.1.3.6.1.4.1.1271.3.4.9.25.1
cwsPtpModemFastRxRecoveryTableSnmpKeyUnique key for cwsPtpModemFastRxRecovery
Integer32
.1.3.6.1.4.1.1271.3.4.9.25.1.1
cwsPtpModemFastRxRecoveryStateWhether fast receiver recovery state is enabled or disabled. Allows modem to attempt to reacquire a signal very soon after a loss of signal by using predefined tuning values.rw
EnabledDisabledEnum (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.25.1.2
cwsPtpModemFastRxRecoveryNetworkConfigurationFast receiver recovery network configuration value.rw
Enumeration
.1.3.6.1.4.1.1271.3.4.9.25.1.3
cwsPtpModemFastRxRecoveryPath1DispersionFast receiver recovery network path 1 dispersion value. The value must be between -80000 and +80000.rw
RecoverLinkDispersionType (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.25.1.4
cwsPtpModemFastRxRecoveryPath2DispersionFast receiver recovery network path 2 dispersion value. The value must be between -80000 and +80000.rw
RecoverLinkDispersionType (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.25.1.5
cwsPtpModemColourlessRxChannelPowerTableColourless Rx Channel optical power related attributes.
SEQUENCE OF CwsPtpModemColourlessRxChannelPowerEntry
.1.3.6.1.4.1.1271.3.4.9.26
cwsPtpModemColourlessRxChannelPowerEntryEntry for cwsPtpModemColourlessRxChannelPowerTable.
CwsPtpModemColourlessRxChannelPowerEntry
.1.3.6.1.4.1.1271.3.4.9.26.1
cwsPtpModemColourlessRxChannelPowerTableSnmpKeyUnique key for cwsPtpModemColourlessRxChannelPower
Integer32
.1.3.6.1.4.1.1271.3.4.9.26.1.1
cwsXcvrColourlessRxChannelPowerActualActual Tx or Rx optical power in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.26.1.2
cwsXcvrColourlessRxChannelPowerMaximumMaximum Tx or Rx optical power in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.26.1.3
cwsXcvrColourlessRxChannelPowerMinimumMinimum Tx or Rx optical power in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.26.1.4
cwsXcvrColourlessRxChannelPowerMaximumRecordedTimeThe exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string.ro
StringMaxl32 (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.26.1.5
cwsXcvrColourlessRxChannelPowerMinimumRecordedTimeThe exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string.ro
StringMaxl32 (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.26.1.6
cwsPtpModemColourlessRxChannelStatusTableNone
SEQUENCE OF CwsPtpModemColourlessRxChannelStatusEntry
.1.3.6.1.4.1.1271.3.4.9.27
cwsPtpModemColourlessRxChannelStatusEntryEntry for cwsPtpModemColourlessRxChannelStatusTable.
CwsPtpModemColourlessRxChannelStatusEntry
.1.3.6.1.4.1.1271.3.4.9.27.1
cwsPtpModemColourlessRxChannelStatusTableSnmpKeyUnique key for cwsPtpModemColourlessRxChannelStatus
Integer32
.1.3.6.1.4.1.1271.3.4.9.27.1.1
cwsPtpModemColourlessRxChannelStatusLossOfSignalColourless Rx power Loss of Signal.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.27.1.2
cwsPtpModemColourlessRxChannelStatusHighAlarmStatusOptical Colourless Rx power high alarm status, boolean, true if alarm is raised, false if alarm is not raised.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.27.1.3
cwsPtpModemColourlessRxChannelStatusLowAlarmStatusOptical Colourless Rx power low alarm status, boolean, true if alarm is raised, false if alarm is not raised.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.27.1.4
cwsPtpModemColourlessTxChannelPowerTableColourless Tx Channel optical power related attributes.
SEQUENCE OF CwsPtpModemColourlessTxChannelPowerEntry
.1.3.6.1.4.1.1271.3.4.9.28
cwsPtpModemColourlessTxChannelPowerEntryEntry for cwsPtpModemColourlessTxChannelPowerTable.
CwsPtpModemColourlessTxChannelPowerEntry
.1.3.6.1.4.1.1271.3.4.9.28.1
cwsPtpModemColourlessTxChannelPowerTableSnmpKeyUnique key for cwsPtpModemColourlessTxChannelPower
Integer32
.1.3.6.1.4.1.1271.3.4.9.28.1.1
cwsXcvrColourlessTxChannelPowerActualActual Tx or Rx optical power in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.28.1.2
cwsXcvrColourlessTxChannelPowerMaximumMaximum Tx or Rx optical power in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.28.1.3
cwsXcvrColourlessTxChannelPowerMinimumMinimum Tx or Rx optical power in dBm.ro
Decimal1Dig (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.28.1.4
cwsXcvrColourlessTxChannelPowerMaximumRecordedTimeThe exact date and time when the maximum optical power (Tx or Rx) was recorded. In the format of a date time string.ro
StringMaxl32 (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.28.1.5
cwsXcvrColourlessTxChannelPowerMinimumRecordedTimeThe exact date and time when the minimum optical power (Tx or Rx) was recorded. In the format of a date time string.ro
StringMaxl32 (CIENA-WS-TYPEDEFS-MIB)
.1.3.6.1.4.1.1271.3.4.9.28.1.6
cwsPtpAugPtpModemDiagnosticsTableNone
SEQUENCE OF CwsPtpAugPtpModemDiagnosticsEntry
.1.3.6.1.4.1.1271.3.4.9.29
cwsPtpAugPtpModemDiagnosticsEntryEntry for cwsPtpAugPtpModemDiagnosticsTable.
CwsPtpAugPtpModemDiagnosticsEntry
.1.3.6.1.4.1.1271.3.4.9.29.1
cwsPtpModemDiagnosticsNumberOfOduNumber of ODUs present.ro
Unsigned32
.1.3.6.1.4.1.1271.3.4.9.29.1.1
cwsPtpModemOtu4TableNone
SEQUENCE OF CwsPtpModemOtu4Entry
.1.3.6.1.4.1.1271.3.4.9.30
cwsPtpModemOtu4EntryEntry for cwsPtpModemOtu4Table.
CwsPtpModemOtu4Entry
.1.3.6.1.4.1.1271.3.4.9.30.1
cwsPtpModemOtu4TableSnmpKeyUnique key for cwsPtpModemOtu4
Integer32
.1.3.6.1.4.1.1271.3.4.9.30.1.1
cwsPtpModemOtu4LossOfClockOTU4 Loss of Clock.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.30.1.2
cwsPtpModemOtu4FrequencyOutOfRangeOTU4 Frequency Out Of Range.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.30.1.3
cwsPtpModemOtu4LossOfFrameOTU4 Loss of Frame.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.30.1.4
cwsPtpModemOtu4LossOfMultiFrameOTU4 Loss of Multi-Frame.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.30.1.5
cwsPtpModemOtu4BackwardDefectIndicationOTU4 Backward Defect Indication.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.30.1.6
cwsPtpModemOtu4TrailTraceIdMismatchOTU4 Trail Trace Identifier Mismatch.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.30.1.7
cwsPtpModemOdu4TableNone
SEQUENCE OF CwsPtpModemOdu4Entry
.1.3.6.1.4.1.1271.3.4.9.31
cwsPtpModemOdu4EntryEntry for cwsPtpModemOdu4Table.
CwsPtpModemOdu4Entry
.1.3.6.1.4.1.1271.3.4.9.31.1
cwsPtpModemOdu4OduIdODU id, can be ODU4.1 or ODU4.2.
Integer32
.1.3.6.1.4.1.1271.3.4.9.31.1.1
cwsPtpModemOdu4OpenConnectionIndicationOpen Connection Indication (OCI).ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.2
cwsPtpModemOdu4AlarmIndicationSignalAlarm Indication Signal (AIS).ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.3
cwsPtpModemOdu4LockedLocked (LCK).ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.4
cwsPtpModemOdu4SignalFailSignal Fail.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.5
cwsPtpModemOdu4SignalDegradeSignal Degrade.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.6
cwsPtpModemOdu4TrailTraceIdMismatchTrail Trace Identifier Mismatch.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.7
cwsPtpModemOdu4BackwardDefectIndicationBackward Defect Indication.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.8
cwsPtpModemOdu4PayloadLabelMismatchPayload Label Mismatch.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.9
cwsPtpModemOdu4ClientSignalFailureClient Signal Failure.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.3.4.9.31.1.10
CIENA-WS-PTP-MODEM-MIB - SNMP MIB Reference | MIBs Explorer