CIENA-WS-ALARM-MIB
The CIENA-WS-ALARM-MIB module enables monitoring of real-time alarm states and fault conditions within Ciena Waveserver optical transport systems. It provides structured access to critical event notifications for troubleshooting hardware failures, signal degradation, and service disruptions on the Waveserver platform.
Imported Objects
Objects
50 total| Object Name |
|---|
cienaWsAlarmMIBThis module defines alarm data for the Waveserver. MODULE-IDENTITY .1.3.6.1.4.1.1271.3.4.4 |
cienaWsAlarmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.4.1 |
cienaWsAlarmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.4.2 |
cienaWsAlarmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.4.2.1 |
cienaWsAlarmGroupConformance Group Unknown .1.3.6.1.4.1.1271.3.4.4.2.1.1 |
cienaWsAlarmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.3.4.4.2.2 |
cienaWsAlarmComplianceCompliance Unknown .1.3.6.1.4.1.1271.3.4.4.2.2.1 |
cwsAlarmActiveTableActive alarms SEQUENCE OF CwsAlarmActiveEntry .1.3.6.1.4.1.1271.3.4.4.3 |
cwsAlarmActiveEntryEntry for cwsAlarmActiveTable. CwsAlarmActiveEntry .1.3.6.1.4.1.1271.3.4.4.3.1 |
cwsAlarmActiveAlarmInstanceIdThe alarm Instance ID Integer32 .1.3.6.1.4.1.1271.3.4.4.3.1.1 |
cwsAlarmActiveAcknowledgedAlarm has been acknowledged.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.4.3.1.2 |
cwsAlarmActiveAlarmTableIdThe alarm table ID.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.3.1.3 |
cwsAlarmActiveSeverityThe alarm severity.ro AlarmSeverity .1.3.6.1.4.1.1271.3.4.4.3.1.4 |
cwsAlarmActiveLocalDateTimeThe local date and time when alarm was raised.ro StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.3.1.5 |
cwsAlarmActiveInstanceThe object instance the alarm is raised against.ro StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.3.1.6 |
cwsAlarmActiveDescriptionThe alarm description.ro StringMaxl44 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.3.1.7 |
cwsAlarmActiveSiteIdentifierAn integer to uniquely identify the site where this Waveserver is located.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.3.1.8 |
cwsAlarmActiveGroupIdentifierAn integer to uniquely identify a group of Waveservers within a site.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.3.1.9 |
cwsAlarmActiveMemberIdentifierAn integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.3.1.10 |
cwsAlarmHistoryTableAlarm history SEQUENCE OF CwsAlarmHistoryEntry .1.3.6.1.4.1.1271.3.4.4.4 |
cwsAlarmHistoryEntryEntry for cwsAlarmHistoryTable. CwsAlarmHistoryEntry .1.3.6.1.4.1.1271.3.4.4.4.1 |
cwsAlarmHistoryHistoryIdThe alarm history ID Integer32 .1.3.6.1.4.1.1271.3.4.4.4.1.1 |
cwsAlarmHistoryReasonThe reason for the alarm condition.ro AlarmReason .1.3.6.1.4.1.1271.3.4.4.4.1.2 |
cwsAlarmHistoryAlarmInstanceIdThe alarm instance ID.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.4.1.3 |
cwsAlarmHistoryAlarmTableIdThe alarm table ID.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.4.1.4 |
cwsAlarmHistorySeverityThe alarm severity.ro AlarmSeverity .1.3.6.1.4.1.1271.3.4.4.4.1.5 |
cwsAlarmHistoryLocalDateTimeThe local date and time when alarm was raised.ro StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.4.1.6 |
cwsAlarmHistoryInstanceThe object instance the alarm is raised against.ro StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.4.1.7 |
cwsAlarmHistoryDescriptionThe alarm description.ro StringMaxl44 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.4.1.8 |
cwsAlarmHistorySiteIdentifierAn integer to uniquely identify the site where this Waveserver is located.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.4.1.9 |
cwsAlarmHistoryGroupIdentifierAn integer to uniquely identify a group of Waveservers within a site.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.4.1.10 |
cwsAlarmHistoryMemberIdentifierAn integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.4.1.11 |
cwsAlarmDefinedTableDefined Alarm Table SEQUENCE OF CwsAlarmDefinedEntry .1.3.6.1.4.1.1271.3.4.4.5 |
cwsAlarmDefinedEntryEntry for cwsAlarmDefinedTable. CwsAlarmDefinedEntry .1.3.6.1.4.1.1271.3.4.4.5.1 |
cwsAlarmDefinedAlarmTableIdThe alarm table ID. Integer32 .1.3.6.1.4.1.1271.3.4.4.5.1.1 |
cwsAlarmDefinedEnabledAlarm is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.4.5.1.2 |
cwsAlarmDefinedActiveAlarm is active.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.4.5.1.3 |
cwsAlarmDefinedThresholdThe alarm threshold.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.5.1.4 |
cwsAlarmDefinedCapThe alarm cap.ro Unsigned32 .1.3.6.1.4.1.1271.3.4.4.5.1.5 |
cwsAlarmDefinedSeverityThe alarm severity.ro AlarmSeverity .1.3.6.1.4.1.1271.3.4.4.5.1.6 |
cwsAlarmDefinedInstanceThe object instance the alarm is raised against.ro StringMaxl16 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.5.1.7 |
cwsAlarmDefinedDescriptionThe alarm description.ro StringMaxl44 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.5.1.8 |
cwsAlarmStatisticsTableWaveserver Alarm Statistics. SEQUENCE OF CwsAlarmStatisticsEntry .1.3.6.1.4.1.1271.3.4.4.6 |
cwsAlarmStatisticsEntryEntry for cwsAlarmStatisticsTable. CwsAlarmStatisticsEntry .1.3.6.1.4.1.1271.3.4.4.6.1 |
cwsAlarmStatisticsIndexThe alarm statistics table index. Integer32 .1.3.6.1.4.1.1271.3.4.4.6.1.1 |
cwsAlarmStatisticsActiveThere is alarm active for the alarm typero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.4.6.1.2 |
cwsAlarmStatisticsDisabledThere is alarm disabled for the alarm typero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.3.4.4.6.1.3 |
cwsAlarmStatisticsCountThe count of active alarms for the alarm typero Unsigned32 .1.3.6.1.4.1.1271.3.4.4.6.1.4 |
cwsAlarmStatisticsCumulativeThe cumulative count of active alarms for the alarm typero Unsigned32 .1.3.6.1.4.1.1271.3.4.4.6.1.5 |
cwsAlarmStatisticsTypeThe alarm type.ro StringMaxl32 (CIENA-WS-TYPEDEFS-MIB) .1.3.6.1.4.1.1271.3.4.4.6.1.6 |
CIENA-WS-ALARM-MIB Technical Reference Overview
The CIENA-WS-ALARM-MIB SNMP MIB module published by Ciena defines 50 managed OID objects, including 37 scalar/column metrics, 4 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.3.4.4. Key tabular structures include cwsAlarmActiveTable, cwsAlarmDefinedTable, cwsAlarmHistoryTable, cwsAlarmStatisticsTable.
Key OID Definitions in CIENA-WS-ALARM-MIB
.1.3.6.1.4.1.1271.3.4.4.3Active alarms
.1.3.6.1.4.1.1271.3.4.4.5Defined Alarm Table
.1.3.6.1.4.1.1271.3.4.4.4Alarm history
.1.3.6.1.4.1.1271.3.4.4.6Waveserver Alarm Statistics.
.1.3.6.1.4.1.1271.3.4.4.2.2.1Compliance
.1.3.6.1.4.1.1271.3.4.4.2.1.1Conformance Group
.1.3.6.1.4.1.1271.3.4.4.3.1.2Alarm has been acknowledged.
.1.3.6.1.4.1.1271.3.4.4.3.1.1The alarm Instance ID
.1.3.6.1.4.1.1271.3.4.4.3.1.3The alarm table ID.
.1.3.6.1.4.1.1271.3.4.4.3.1.7The alarm description.
.1.3.6.1.4.1.1271.3.4.4.3.1Entry for cwsAlarmActiveTable.
.1.3.6.1.4.1.1271.3.4.4.3.1.9An integer to uniquely identify a group of Waveservers within a site.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.