CIENA-CES-TACACS-CLIENT-MIB
AI MIB Summary
The CIENA-CES-TACACS-CLIENT-MIB exposes management objects for monitoring TACACS+ client session states, authentication statistics, and connection parameters on Ciena Carrier Ethernet Services (CES) platforms. This module enables administrators to track active TACACS+ client instances, authentication success/failure counters, and session timeouts to validate remote AAA server connectivity and policy enforcement.
Initial creation.
Main OID:
cienaCesTacacsClientMIB.1.3.6.1.4.1.1271.2.3.2
131
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
131 total| Object Name |
|---|
cienaCesTacacsClientMIBInitial creation. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.3.2 |
cienaCesTacacsClientMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1 |
cienaCesTacacsClient OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1 |
cienaCesTacacsClientGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1.1 |
cienaCesTacacsClientAdminStateSetting this object administratively enables or disables the TACACS client on the device.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.1 |
cienaCesTacacsClientOperStateThis object specifies the operational state of the TACACS client.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.2 |
cienaCesTacacsClientTimeoutThis object is the time in seconds between retransmissions
to the TACACS server.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.1.3 |
cienaCesTacacsClientRetriesIndicates the number of times the TACACS server should be
tried before giving up on the server.rwdeprecated Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.1.4 |
cienaCesTacacsClientPrivilegeLevelAdminIndicates the privilege level used for mapping a range of TACACS
privilege levels to the SAOS administrative privilege level. A privilege level returned
by a server is compared to cienaCesTacacsClientPrivilegeLevelRW.
If the server privilege level is less than cienaCesTacacsClientPrivilegeLevelRW
and greater than or equal to the cienaCesTacacsClientPrivilegeLevelAdmin, the SAOS
privilege level is 'admin.'rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.1.5 |
cienaCesTacacsClientPrivilegeLevelRWIndicates the privilege level used for mapping a range of TACACS
privilege levels to the SAOS super user privilege level. A privilege level returned
by a server is compared to cienaCesTacacsClientPrivilegeLevelDiag.
If the server privilege level is less than cienaCesTacacsClientPrivilegeLevelDiag
and greater than or equal to the cienaCesTacacsClientPrivilegeLevelRW, the SAOS
privilege level is 'superuser.'rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.1.6 |
cienaCesTacacsClientPrivilegeLevelDiagIndicates the privilege level used for mapping a range of TACACS
privilege levels to SAOS diagnostic privilege level. A privilege level returned
by a server is compared to this value. If the server privilege level is greater than
or equal to the cienaCesTacacsClientDiagPrivilegeLevel,the SAOS privilege level is 'diag.'rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.1.7 |
cienaCesTacacsClientAuthKeyThe authentication key to be used for TACACS Servers.
Retrieving the value of this object via SNMP returns
an empty string for security reasons.rw TacacsString .1.3.6.1.4.1.1271.2.3.2.1.1.1.8 |
cienaCesTacacsClientAuthenticationAdminStateSetting this object administratively enables or disables TACACS authentication on the device.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.9 |
cienaCesTacacsClientAuthorizationAdminStateSetting this object administratively enables or disables TACACS authorization on the device.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.10 |
cienaCesTacacsClientAccountingAdminStateSetting this object administratively enables or disables TACACS accounting on the device.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.11 |
cienaCesTacacsClientSyslogAdminStateSetting this object administratively enables or disables TACACS Syslog messages on the device.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.12 |
cienaCesTacacsClientAccountingSessionSetting this object enables or disables session logon and logoff logging with TACACS.rw Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.1.13 |
cienaCesTacacsClientAccountingCommandSetting this object enables or disables command start and stop logging.rw Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.1.14 |
cienaCesTacacsClientGlobalServersSetting this object enables or disables global servers.rw Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.1.15 |
cienaCesTacacsClientSearchMethodSetting this object selects the search method.rw Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.1.16 |
cienaCesTacacsClientAuthKeyUnsetSetting this object to true clears the value of
cienaCesTacacsClientAuthKey. Reading this object
always returns a value of false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.1.17 |
cienaCesTacacsClientKeyMinLenSetting this object defines the minimum length for TACACS secret key.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.1.18 |
cienaCesTacacsClientServer OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1.2 |
cienaCesTacacsClientServerTableLists the possible TACACS servers.
To create an entry, specify both cienaCesTacacsClientServerStatus
and cienaCesTacacsClientServerAddr using the SNMP multiple set
operation. SEQUENCE OF CienaCesTacacsClientServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.2.1 |
cienaCesTacacsClientServerEntryTACACS server entry. CienaCesTacacsClientServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1 |
cienaCesTacacsClientServerIndexSpecifies the index of this table. Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.1 |
cienaCesTacacsClientServerAddrHost name or IP address of the TACACS server.rw DisplayString .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.2 |
cienaCesTacacsClientServerResolvedAddrSpecifies the resolved IP address if cienaCesTacacsClientServerAddr is set to host name.
If cienaCesTacacsClientServerAddr is set to IP address then cienaCesTacacsClientServerResolvedAddr
contains the same information as cienaCesTacacsClientServerAddr.ro IpAddress .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.3 |
cienaCesTacacsClientServerPrioritySpecifies the priority of the TACACS servers configured on the device.
This is the order in which the servers will accessed.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.4 |
cienaCesTacacsClientServerAuthPortThe destination TCP port number to which TACACS
messages are sent. The TACACS server is not
used for authentication if this port number is 0.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.5 |
cienaCesTacacsClientServerApplicationThis object specifies how the TACACS server is used for authentication.
Whether this TACACS server is used for userLogin authentication or dot1x authentication
or both, is decided by the value of this MIB object. Dot1x is not supported on all platforms.rwdeprecated Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.6 |
cienaCesTacacsClientServerStatusTo create a row in this table, set this object to createAndGo(4).
To create an entry, specify both cienaCesTacacsClientServerStatus and
cienaCesTacacsClientServerAddr with the SNMP multiple set operation.
To disable a TACACS server, set cienaCesTacacsClientServerStatus
object to the 'notInService' status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.7 |
cienaCesTacacsClientServerResolvedInetAddrTypeSpecifies the resolved IP address type. Used in conjunction with
cienaCesTacacsClientServerResolvedInetAddr.
When set to:
ipv4: cienaCesTacacsClientServerResolvedInetAddr should be compliant
with InetAddressIPv4
ipv6: cienaCesTacacsClientServerResolvedInetAddr should be compliant
with InetAddressIPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.8 |
cienaCesTacacsClientServerResolvedInetAddrSpecifies the resolved IP address if cienaCesTacacsClientServerAddr is set to host name.
If cienaCesTacacsClientServerAddr is set to IP address then cienaCesTacacsClientServerResolvedInetAddress
contains the same information as cienaCesTacacsClientServerAddr. This OID is used in
conjunction with cienaCesTacacsClientServerResolvedInetAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.3.2.1.1.2.1.1.9 |
cienaCesTacacsClientGlobalStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1.3 |
cienaCesTacacsClientGlobalStatisticsTableTACACS global statistics table. SEQUENCE OF CienaCesTacacsClientGlobalStatisticsEntry .1.3.6.1.4.1.1271.2.3.2.1.1.3.1 |
cienaCesTacacsClientGlobalStatisticsEntryTACACS global statistics entry. CienaCesTacacsClientGlobalStatisticsEntry .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1 |
cienaCesTacacsClientGlobalAuthenticationAccessRequestsThe number of TACACS Access-Request packets sent
to this server not including retransmissions.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.1 |
cienaCesTacacsClientGlobalAuthenticationAccessRetransmissionsThe number of TACACS Access-Request packets
retransmitted to this TACACS authentication server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.2 |
cienaCesTacacsClientGlobalAuthenticationAccessAcceptsThe number of TACACS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.3 |
cienaCesTacacsClientGlobalAuthenticationAccessRejectsThe number of TACACS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.4 |
cienaCesTacacsClientGlobalAuthenticationMalformedAccessResponsesThe number of malformed TACACS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.5 |
cienaCesTacacsClientGlobalAuthenticationBadAuthenticatorsThe number of TACACS Access-Response packets
containing invalid authenticators or signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.6 |
cienaCesTacacsClientGlobalAuthenticationTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry sending to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a request as well as a timeout.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.7 |
cienaCesTacacsClientGlobalAuthenticationUnknownTypesThe number of TACACS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.8 |
cienaCesTacacsClientGlobalAuthenticationBadHeaderSequenceThe number of TACACS packets which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.9 |
cienaCesTacacsClientGlobalAuthorizationAccessRequestsThe number of TACACS Access-Request packets sent
to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.10 |
cienaCesTacacsClientGlobalAuthorizationAccessRetransmissionsThe number of TACACS Access-Request packets
retransmitted to this TACACS authentication server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.11 |
cienaCesTacacsClientGlobalAuthorizationAccessAcceptsThe number of TACACS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.12 |
cienaCesTacacsClientGlobalAuthorizationAccessRejectsThe number of TACACS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.13 |
cienaCesTacacsClientGlobalAuthorizationMalformedAccessResponsThe number of malformed TACACS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.14 |
cienaCesTacacsClientGlobalAuthorizationBadAuthenticatorsThe number of TACACS Access-Response packets
containing invalid authenticators or signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.15 |
cienaCesTacacsClientGlobalAuthorizationTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry sending to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a request as well as a timeout.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.16 |
cienaCesTacacsClientGlobalAuthorizationUnknownTypesThe number of TACACS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.17 |
cienaCesTacacsClientGlobalAuthorizationBadHeaderSequenceThe number of TACACS packets which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.18 |
cienaCesTacacsClientGlobalAccountingAccessRequestsThe number of TACACS Access-Request packets sent
to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.19 |
cienaCesTacacsClientGlobalAccountingAccessRetransmissionsThe number of TACACS Access-Request packets
retransmitted to this TACACS authentication server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.20 |
cienaCesTacacsClientGlobalAccountingAccessAcceptsThe number of TACACS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.21 |
cienaCesTacacsClientGlobalAccountingAccessRejectsThe number of TACACS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.22 |
cienaCesTacacsClientGlobalAccountingMalformedAccessResponsesThe number of malformed TACACS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.23 |
cienaCesTacacsClientGlobalAccountingBadAuthenticatorsThe number of TACACS Access-Response packets
containing invalid authenticators or signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.24 |
cienaCesTacacsClientGlobalAccountingTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry sending to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a request as well as a timeout.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.25 |
cienaCesTacacsClientGlobalAccountingUnknownTypesThe number of TACACS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.26 |
cienaCesTacacsClientGlobalAccountingBadHeaderSequenceThe number of TACACS packets which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.27 |
cienaCesTacacsClientGlobalServerClearStatisticsThis object clears the statistics for a server.rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.3.1.1.28 |
cienaCesTacacsClientAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1.4 |
cienaCesTacacsClientAuthenticationServerTableLists the possible TACACS servers.
To create an entry, specify both cienaCesTacacsClientAuthenticationServerStatus
and cienaCesTacacsClientAuthenticationServerAddr with the SNMP multiple set operation. SEQUENCE OF CienaCesTacacsClientAuthenticationServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.4.1 |
cienaCesTacacsClientAuthenticationServerEntryTACACS authentication server entry. CienaCesTacacsClientAuthenticationServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1 |
cienaCesTacacsClientAuthenticationServerIndexSpecifies the index of this table.ro Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.1 |
cienaCesTacacsClientAuthenticationServerAddrHost name or IP address of the TACACS server.rw DisplayString .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.2 |
cienaCesTacacsClientAuthenticationServerResolvedAddrSpecifies the resolved IP address if cienaCesTacacsClientAuthenticationServerAddr is set to host name.
If cienaCesTacacsClientAuthenticationServerAddr is set to IP address, then cienaCesTacacsClientAuthenticationServerResolvedAddr
contains same information as cienaCesTacacsClientAuthenticationServerAddr.ro IpAddress .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.3 |
cienaCesTacacsClientAuthenticationServerPrioritySpecifies the priority of TACACS servers configured on the device.
This is the order in which the servers are accessed.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.4 |
cienaCesTacacsClientAuthenticationServerAuthPortThe destination TCP port number to which TACACS
messages are sent. The TACACS server is not
used for authentication if this port number is 0.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.5 |
cienaCesTacacsClientAuthenticationServerAccessRequestsThe number of TACACS Access-Request packets sent
to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.6 |
cienaCesTacacsClientAuthenticationServerAccessRetransmissionsThe number of TACACS Access-Request packets
retransmitted to this TACACS authentication server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.7 |
cienaCesTacacsClientAuthenticationServerAccessAcceptsThe number of TACACS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.8 |
cienaCesTacacsClientAuthenticationServerAccessRejectsThe number of TACACS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.9 |
cienaCesTacacsClientAuthenticationServerMalformedAccessResponsesThe number of malformed TACACS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.10 |
cienaCesTacacsClientAuthenticationServerBadAuthenticatorsThe number of TACACS Access-Response packets
containing invalid authenticators or signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.11 |
cienaCesTacacsClientAuthenticationServerTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry sending to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a request as well as a timeout.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.13 |
cienaCesTacacsClientAuthenticationServerUnknownTypesThe number of TACACS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.14 |
cienaCesTacacsClientAuthenticationServerBadHeaderSequenceThe number of TACACS packets which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.15 |
cienaCesTacacsClientAuthenticationServerStatusTo create a row in this table, a manager must
set this object to either createAndGo(4).
To create an entry, specify both cienaCesTacacsClientAuthenticationServerStatus and
cienaCesTacacsClientAuthenticationServerAddr with the SNMP multiple set operation.
To disable a TACACS server, the operator can set cienaCesTacacsClientAuthenticationServerStatus
object to 'notInService' state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.16 |
cienaCesTacacsClientAuthenticationServerApplicationThis object specifies how the TACACS server is used for authentication.
Whether this TACACS server is used for userLogin authentication or dot1x authentication
or both, is decided by the value of this MIB object. Dot1x is not supported on all platforms.rwdeprecated Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.17 |
cienaCesTacacsClientAuthenticationServerClearStatisticsThis object clears the statistics for a server.rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.4.1.1.18 |
cienaCesTacacsClientAuthorization OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1.5 |
cienaCesTacacsClientAuthorizationServerTableLists the possible TACACS servers.
To create an entry, specify both cienaCesTacacsClientAuthorizationServerStatus
and cienaCesTacacsClientAuthorizationServerAddr with the SNMP multiple set operation. SEQUENCE OF CienaCesTacacsClientAuthorizationServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.5.1 |
cienaCesTacacsClientAuthorizationServerEntryTACACS authorization server entry. CienaCesTacacsClientAuthorizationServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1 |
cienaCesTacacsClientAuthorizationServerIndexSpecifies the index of this table.ro Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.1 |
cienaCesTacacsClientAuthorizationServerAddrHost name or IP address of the TACACS server.rw DisplayString .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.2 |
cienaCesTacacsClientAuthorizationServerResolvedAddrSpecifies the resolved IP address if cienaCesTacacsClientAuthorizationServerAddr is set to host name.
If cienaCesTacacsClientAuthorizationServerAddr is set to IP address, then cienaCesTacacsClientAuthorizationServerResolvedAddr
contains the same information as cienaCesTacacsClientAuthorizationServerAddr.ro IpAddress .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.3 |
cienaCesTacacsClientAuthorizationServerPrioritySpecifies the priority of TACACS servers configured on the device.
This is the order in which the servers are accessed.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.4 |
cienaCesTacacsClientAuthorizationServerAuthPortThe destination TCP port number to which TACACS
messages are sent. The TACACS server is not
used for authentication if this port number is 0.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.5 |
cienaCesTacacsClientAuthorizationServerAccessRequestsThe number of TACACS Access-Request packets sent
to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.6 |
cienaCesTacacsClientAuthorizationServerAccessRetransmissionsThe number of TACACS Access-Request packets
retransmitted to this TACACS authentication server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.7 |
cienaCesTacacsClientAuthorizationServerAccessAcceptsThe number of TACACS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.8 |
cienaCesTacacsClientAuthorizationServerAccessRejectsThe number of TACACS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.9 |
cienaCesTacacsClientAuthorizationServerMalformedAccessResponsesThe number of malformed TACACS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.10 |
cienaCesTacacsClientAuthorizationServerBadAuthenticatorsThe number of TACACS Access-Response packets
containing invalid authenticators or signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.11 |
cienaCesTacacsClientAuthorizationServerTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry sending to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a Request as well as a timeout.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.12 |
cienaCesTacacsClientAuthorizationServerUnknownTypesThe number of TACACS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.13 |
cienaCesTacacsClientAuthorizationServerBadHeaderSequenceThe number of TACACS packets which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.14 |
cienaCesTacacsClientAuthorizationServerStatusTo create a row in this table, a manager must
set this object to either createAndGo(4).
To create an entry, specify both cienaCesTacacsClientAuthorizationServerStatus
and cienaCesTacacsClientAuthorizationServerAddr with the SNMP multiple set operation.
To disable a TACACS server, the operator can set the cienaCesTacacsClientAuthorizationServerStatus
object to 'notInService' state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.15 |
cienaCesTacacsClientAuthorizationServerApplicationThis object specifies how the TACACS server is used for authentication.
Whether this TACACS server is used for userLogin authentication or dot1x authentication
or both, is decided by the value of this MIB object. Dot1x is not supported on all platforms.rwdeprecated Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.16 |
cienaCesTacacsClientAuthorizationServerClearStatisticsThis object clears the statistics for a server.rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.5.1.1.17 |
cienaCesTacacsClientAccounting OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.1.1.6 |
cienaCesTacacsClientAccountingServerTableLists the possible TACACS servers.
To create an entry, specify both cienaCesTacacsClientAccountingServerStatus
and cienaCesTacacsClientAccountingServerAddr with the SNMP multiple set operation. SEQUENCE OF CienaCesTacacsClientAccountingServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.6.1 |
cienaCesTacacsClientAccountingServerEntryTACACS accounting server entry. CienaCesTacacsClientAccountingServerEntry .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1 |
cienaCesTacacsClientAccountingServerIndexSpecifies the index of this table.ro Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.1 |
cienaCesTacacsClientAccountingServerAddrHost name or IP address of the TACACS server.rw DisplayString .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.2 |
cienaCesTacacsClientAccountingServerResolvedAddrSpecifies the resolved IP address if cienaCesTacacsClientAccountingServerAddr is set to host name.
If cienaCesTacacsClientAccountingServerAddr is set to IP address then cienaCesTacacsClientAccountingServerResolvedAddr
contains the same information as cienaCesTacacsClientAccountingServerAddr.ro IpAddress .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.3 |
cienaCesTacacsClientAccountingServerPrioritySpecifies the priority of TACACS servers configured on the device.
This is the order in which the servers are accessed.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.4 |
cienaCesTacacsClientAccountingServerAuthPortThe destination TCP port number to which TACACS
messages are sent. The TACACS server is not
used for authentication if this port number is 0.rw Integer32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.5 |
cienaCesTacacsClientAccountingServerAccessRequestsThe number of TACACS Access-Request packets sent
to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.6 |
cienaCesTacacsClientAccountingServerAccessRetransmissionsThe number of TACACS Access-Request packets
retransmitted to this TACACS authentication server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.7 |
cienaCesTacacsClientAccountingServerAccessAcceptsThe number of TACACS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.8 |
cienaCesTacacsClientAccountingServerAccessRejectsThe number of TACACS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.9 |
cienaCesTacacsClientAccountingServerMalformedAccessResponsesThe number of malformed TACACS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.10 |
cienaCesTacacsClientAccountingServerBadAuthenticatorsThe number of TACACS Access-Response packets
containing invalid authenticators or signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.11 |
cienaCesTacacsClientAccountingServerTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry sending to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a Request as well as a timeout.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.12 |
cienaCesTacacsClientAccountingServerUnknownTypesThe number of TACACS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.13 |
cienaCesTacacsClientAccountingServerBadHeaderSequenceThe number of TACACS packets of which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.14 |
cienaCesTacacsClientAccountingServerStatusTo create a row in this table, a manager must
set this object to either createAndGo(4).
To create an entry, specify both cienaCesTacacsClientAccountingServerStatus,
and cienaCesTacacsClientAccountingServerAddr with the SNMP multiple set operation.
To disable a TACACS server, the operator can set cienaCesTacacsClientAccountingServerStatus
object to the 'notInService' state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.15 |
cienaCesTacacsClientAccountingServerApplicationThis object specifies how the TACACS server is used for authentication.
Whether this TACACS server is used for userLogin authentication or dot1x authentication
or both, is decided by the value of this MIB object. Dot1x is not supported on all platforms.rwdeprecated Enumeration .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.16 |
cienaCesTacacsClientAccountingServerClearStatisticsThis object clears the statistics for a server.rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.2.1.1.6.1.1.17 |
cienaCesTacacsClientMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.2 |
cienaCesTacacsClientMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.2.0 |
cienaCesTacacsClientConnectionFailedA cienaCesTacacsClientConnectionFailed notification is sent if the
TACACS client is unable to contact the TACACS server. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.3.2.2.0.1 |
cienaCesTacacsClientMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.3 |
cienaCesTacacsClientMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.3.1 |
cienaCesTacacsClientMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.2.3.2 |