CIENA-CES-RSVPTE-MIB
The CIENA-CES-RSVPTE-MIB enables monitoring and configuration of Resource Reservation Protocol-Traffic Engineering (RSVP-TE) parameters, specifically managing MPLS tunnel establishment, state, and resource allocation on Ciena Carrier Ethernet Service (CES) platforms.
Imported Objects
Objects
36 total| Object Name |
|---|
cienaCesRsvpteMIBThis MIB module is for the RSVP-TE configuration for MPLS tunnels MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.16 |
cienaCesRsvpteMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.16.1 |
cienaCesRsvpteObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.16.1.1 |
cienaCesRsvpteAdminStatusThe desired administrative status of RSVP-TE.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.16.1.1.1 |
cienaCesRsvpteOperStatusThe current operational status of RSVP-TE.ro RsvpOperStatus .1.3.6.1.4.1.1271.2.1.16.1.1.2 |
cienaCesRsvpteRetryIntervalThe persistent tunnel retry interval.
This is the interval between the first failure of a persistent
tunnel and the first attempt to re-establish the tunnel.
This cannot be changed while the administrative status is enabled
or the operational status is up.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.16.1.1.3 |
cienaCesRsvpteRetryInfiniteStateThe persistent tunnel retry infinity.
This is the state which when on, triggers RSVP-TE to try to restore the tunnels
infinite times. This object can only be set if RSVP-TE is globally disabled.ro Enumeration .1.3.6.1.4.1.1271.2.1.16.1.1.4 |
cienaCesRsvpteRetryMaxThe maximum number of retry attempts that will be made before a
persistent tunnel is deemed inoperable. Once in this state,
a management agent should set mplsTunnelAdminStatus to 'up' to
attempt to re-establish the tunnel. This field is not used when
cienaCesRsvpteRetryInfiniteState is on.ro INTEGER .1.3.6.1.4.1.1271.2.1.16.1.1.5 |
cienaCesRsvpteRefreshIntervalThe RSVP-TE value, R, which is used to set the average
interval between refresh path and RESV messages.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.1271.2.1.16.1.1.6 |
cienaCesRsvpteRefreshMultipleThe RSVP-TE value, K, which is the number of unresponded path
or RESV refresh attempts that must be made, spaced by
the refresh interval, before the state is deemed to have
timed out.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.7 |
cienaCesRsvpteRfrshSlewDenomThis object is deprecated and the new object to provide this information is
cienaCesRsvpteRefreshSlewDenominator in this table.rodeprecated Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.8 |
cienaCesRsvpteRfrshSlewNumeratorThis object is deprecated and the new object to provide this information is
cienaCesRsvpteRefreshSlewNumerator in this table.rodeprecated Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.9 |
cienaCesRsvpteBlockadeMultipleThe RSVP-TE value, Kb, which is the number of refresh timeout
periods after which the blockade state is deleted.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.10 |
cienaCesRsvpteLSPSetupPriorityThe setup priority to apply to LSPs that are not
signaling this parameter. 0 represents the highest
priority and 7 the lowest. The value of this object must be
numerically greater than or equal to (lower or equal priority)
than the value of the holding priority object.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.11 |
cienaCesRsvpteLSPHoldingPriorityThe holding priority to apply to LSPs that are not
signaling this parameter. 0 represents the highest
priority and 7 the lowest. The value of this object must be
numerically less than or equal to (higher or equal priority)
than the value of the holding priority object.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.12 |
cienaCesRsvpteUseHopByHopA flag to indicate that RSVP-TE should use the hop by hop
addressing scheme for the PATH and PATH-TEAR messages it
sends. If set, then the IP addresses used in the IP header
of the PATH messages forwarded by RSVP-TE set the source as the
local outgoing interface IP address, and set the destination as
the next hop router IP address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.16.1.1.13 |
cienaCesRsvpteRestartCapableA flag to indicate whether the local node should advertise
itself as restart capable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.16.1.1.14 |
cienaCesRsvpteRestartTimeThe time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP-TE communication. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
Only used if cienaCesRsvpteRestartCapable is set to true.
For devices which only act as the Helper node, this timer
is unused and will return value 0.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.16.1.1.15 |
cienaCesRsvpteRecoveryTimeThe period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP-TE and
MPLS forwarding information after the re-establishment of
Hello connectivity. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
A value of zero indicates that the node does not support
resynchronization following failure of the local node.
A value of 0xFFFFFFFF indicates an infinite recovery time.
Only used if cienaCesRsvpteRestartCapable is set to true.
For devices which only act as the Helper node, this timer
is unused and will return value 0.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.16.1.1.16 |
cienaCesRsvpteMinPeerRestartThe mininum period of time in milliseconds that RSVP-TE
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication loss.
RSVP-TE waits for the maximum of this time and the
restart_time advertised in the RESTART_CAP object in Hello
messages from the neighbor.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.17 |
cienaCesRsvpteRefreshSlewDenominatorThe denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fraction until it reaches the new desired value.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.18 |
cienaCesRsvpteRefreshSlewNumeratorThe numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
fraction until it reaches the new desired value.ro Integer32 .1.3.6.1.4.1.1271.2.1.16.1.1.19 |
cienaCesRsvpteGRAdminStatusRSVP-TE Graceful restart status (Enabled/Disabled).ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.16.1.1.20 |
cienaCesRsvpteGRModeRSVP-TE Graceful restart Operational status.ro RsvpGRMode .1.3.6.1.4.1.1271.2.1.16.1.1.21 |
cienaCesRsvpte OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.16.1.2 |
cienaCesRsvpteIfTableA table of interfaces on which RSVP-TE can be enabled. SEQUENCE OF CienaCesRsvpteIfEntry .1.3.6.1.4.1.1271.2.1.16.1.2.1 |
cienaCesRsvpteIfEntryAn entry in the RSVP-TE interface table. CienaCesRsvpteIfEntry .1.3.6.1.4.1.1271.2.1.16.1.2.1.1 |
cienaCesRsvpteIfIndexInterface index. INTEGER .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1 |
cienaCesRsvpteIfNameInterface name.ro OCTET STRING .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2 |
cienaCesRsvpteIfIpAddrInterface IP address.ro IpAddress .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3 |
cienaCesRsvpteIfMtuThis object is deprecated and no longer in use.rodeprecated INTEGER .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4 |
cienaCesRsvpteIfAdminStatusRSVP-TE administrative status on this interface.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5 |
cienaCesRsvpteIfOperStatusRSVP-TE operational status on this interface.ro Enumeration .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6 |
cienaCesRsvpteIfHelloIntervalRSVP-TE Hello message interval.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7 |
cienaCesRsvpteIfHelloToleranceRSVP-TE Hello tolerance defines the number of Hello intervals that can pass without receiving a
successful Hello message from a partner before the Hello session times out.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8 |
cienaCesRsvpteIfAdvertisedLabelThis object indicates what kind of label will be advertised by RSVP-TE for a
Label Request received on this L3 interface.ro AdvertisedLabel .1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9 |
CIENA-CES-RSVPTE-MIB Technical Reference Overview
The CIENA-CES-RSVPTE-MIB SNMP MIB module published by Ciena defines 36 managed OID objects, including 30 scalar/column metrics, 1 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.16. Key tabular structures include cienaCesRsvpteIfTable.
Key OID Definitions in CIENA-CES-RSVPTE-MIB
.1.3.6.1.4.1.1271.2.1.16.1.2.1A table of interfaces on which RSVP-TE can be enabled.
.1.3.6.1.4.1.1271.2.1.16.1.1.1The desired administrative status of RSVP-TE.
.1.3.6.1.4.1.1271.2.1.16.1.1.2The current operational status of RSVP-TE.
.1.3.6.1.4.1.1271.2.1.16.1.1.3The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. This cannot be changed while the administrative status is enabled or the operational status is up.
.1.3.6.1.4.1.1271.2.1.16.1.1.4The persistent tunnel retry infinity. This is the state which when on, triggers RSVP-TE to try to restore the tunnels infinite times. This object can only be set if RSVP-TE is globally disabled.
.1.3.6.1.4.1.1271.2.1.16.1.1.5The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to re-establish the tunnel. This field is not used when cienaCesRsvpteRetryInfiniteState is on.
.1.3.6.1.4.1.1271.2.1.16.1.1.6The RSVP-TE value, R, which is used to set the average interval between refresh path and RESV messages.
.1.3.6.1.4.1.1271.2.1.16.1.1.7The RSVP-TE value, K, which is the number of unresponded path or RESV refresh attempts that must be made, spaced by the refresh interval, before the state is deemed to have timed out.
.1.3.6.1.4.1.1271.2.1.16.1.1.8This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewDenominator in this table.
.1.3.6.1.4.1.1271.2.1.16.1.1.9This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewNumerator in this table.
.1.3.6.1.4.1.1271.2.1.16.1.1.10The RSVP-TE value, Kb, which is the number of refresh timeout periods after which the blockade state is deleted.
.1.3.6.1.4.1.1271.2.1.16.1.1.11The setup priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be numerically greater than or equal to (lower or equal priority) than the value of the holding priority object.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.