CIENA-CES-PTP-MIB
AI MIB Summary
The CIENA-CES-PTP-MIB enables configuration and monitoring of Physical Termination Point attributes on Ciena Carrier Ethernet Service (CES) platforms, specifically managing PTP clock synchronization parameters and interface termination states. This module provides granular control over PTP profile settings, delay measurement mechanisms, and port-level synchronization status required for high-precision timing distribution in carrier networks.
This module defines device configuration associated with PTP (Physical Termination Point) attributes.
Main OID:
cienaCesPtpMIB.1.3.6.1.4.1.1271.2.1.38
48
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
cienaCesPtpMIBThis module defines device configuration associated with PTP (Physical Termination Point) attributes. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.38 |
cienaCesPtpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.38.1 |
cienaCesPtp OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.38.1.1 |
cienaCesPtpTableA table describing PTP attributes. SEQUENCE OF CienaCesPtpEntry .1.3.6.1.4.1.1271.2.1.38.1.1.1 |
cienaCesPtpEntryAn entry in the PTP table. CienaCesPtpEntry .1.3.6.1.4.1.1271.2.1.38.1.1.1.1 |
cienaCesPtpIfIndexThe interface index of the PTP. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.1 |
cienaCesPtpSlotIndexIndicates the slot index associated with the PTP.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.2 |
cienaCesPtpPortIndexIndicates the port index associated with the PTP.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.3 |
cienaCesPtpPortNumberIndicates the port number associated with the PTP.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.4 |
cienaCesPtpIfDescrA textual string containing information about the PTP interface.ro DisplayString .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.5 |
cienaCesPtpModulationSchemeA textual string containing the modulation scheme of the PTP.ro DisplayString .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.6 |
cienaCesPtpSupportedOpuTypesThis object represents all supported OPU payload types for the PTP.
The individual bit position should be set to 1 for each payload type
supported on the PTP and 0 if the payload type is unsupported.ro Bits .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.7 |
cienaCesPtpAdminStateThe administrative state of the PTP.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.8 |
cienaCesPtpOperStateThe operational state of the PTP.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.9 |
cienaCesPtpAdminWavelengthThe wavelength of the laser expressed in nm. This value is directly
related to cienaCesPtpAdminFrequency and will be 0.00 when the laser
is unset or disabled. The laser wavelength (or frequency) must be set
before the laser can be turned on.ro PtpHundredths UNITS "nm" .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.10 |
cienaCesPtpAdminFrequencyThe frequency of the laser expressed in GHz. This value is directly
related to cienaCesPtpAdminWavelength and will be 0.00 when the laser
is unset or disabled. The laser frequency (or wavelength) must be set
before the laser can be turned on.ro PtpHundredths UNITS "GHz" .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.11 |
cienaCesPtpTxPowerReductionThis object has a value of true(1) when tx power reduction
(TX Blanking) is on and false(2) when it is off. The tx power
reduction mode cannot be turned on unless the OTN service layer is
disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.12 |
cienaCesPtpTxPowerThe output power of the laser expressed in dBm.ro PtpHundredths UNITS "dBm" .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.13 |
cienaCesPtpLineSysTypeThe line system type of the PTP. The PTP must be otn-service disabled
before this value may be changed.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.14 |
cienaCesPtpOptimizationModeThe performance optimization mode. The PTP must be otn-service
disabled before this value may be changed.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.15 |
cienaCesPtpWavelengthSpacingWavelength spacing indicates the width of the wavelength expressed in
GHz. The PTP must be otn-service disabled before this value may be
changed.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.16 |
cienaCesPtpSpectralOccupancyThe spectral occupancy of the PTP.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.17 |
cienaCesPtpTxTuningModeThe tuning mode of the PTP.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.18 |
cienaCesPtpRotationThis object has a value of true(1) when the rotation option is on and
false(2) when it is off.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.19 |
cienaCesPtpCarrierCenteringThe carrier centering mode of the PTP.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.20 |
cienaCesPtpOchEnmModeThe interleaver mode of the PTP.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.21 |
cienaCesPtpChContentionDetectThis object has a value of true(1) when channel contention detection
is on and false(2) when it is off.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.22 |
cienaCesPtpStormControlThis object has a value of true(1) when storm protection is on and
false(2) when it is off.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.23 |
cienaCesPtpStormModeThe storm configuration of the PTP.ro Enumeration .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.24 |
cienaCesPtpStormPath1Storm dispersion path 1.ro Integer32 .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.25 |
cienaCesPtpStormPath2Storm dispersion path 2.ro Integer32 .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.26 |
cienaCesPtpSpliCntrlThis object has a value of true(1) when spli is enabled and false(2)
when it is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.27 |
cienaCesPtpChildOtuIfIndexThe interface index of the OTU mapped to the PTP.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.1271.2.1.38.1.1.1.1.28 |
cienaCesPtpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.38.2 |
cienaCesPtpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.38.2.1 |
cienaCesPtpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.38.2.2 |
cienaCesPtpMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.38 |
cienaCesPtpMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.38.0 |
cienaCesPtpAdminStateChangeNotificationThis notification is sent when cienaCesPtpAdminState is modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.1 |
cienaCesPtpOperStateChangeNotificationThis notification is sent when cienaCesPtpOperState is modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.2 |
cienaCesPtpAdminWavelengthChangeNotificationThis notification is sent when cienaCesPtpAdminWavelength is
modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.3 |
cienaCesPtpAdminFrequencyChangeNotificationThis notification is sent when cienaCesPtpAdminFrequency is modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.4 |
cienaCesPtpTxPowerChangeNotificationThis notification is sent when cienaCesPtpTxPower is administratively
modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.5 |
cienaCesPtpLineSysTypeChangeNotificationThis notification is sent when cienaCesPtpLineSysType is modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.6 |
cienaCesPtpOptimizationModeChangeNotificationThis notification is sent when cienaCesPtpOptimizationMode is
modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.7 |
cienaCesPtpWavelengthSpacingChangeNotificationThis notification is sent when cienaCesPtpWavelengthSpacing is
modified. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.8 |
cienaCesPtpCreatedNotificationThis notification is sent when a PTP is created. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.9 |
cienaCesPtpDeletedNotificationThis notification is sent when a PTP is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.38.0.10 |