Home/Catalog/CIENA-CES-PORT-XCVR-MIB

CIENA-CES-PORT-XCVR-MIB

AI MIB Summary

The CIENA-CES-PORT-XCVR-MIB monitors optical transceiver status and generates notifications for port-level hardware events on Ciena Carrier Ethernet Service (CES) platforms. It specifically tracks transceiver health metrics, including module presence, optical power levels, and temperature thresholds, to alert administrators of physical layer failures or degradation.

This module defines the port XCVR related notifications.
Main OID:
cienaCesPortXcvrMIB.1.3.6.1.4.1.1271.2.1.9
77
Objects
Active
Status
5
Dependencies

Imported Objects

CIENA-GLOBAL-MIB
CIENA-SMI
CIENA-TC
SNMPv2-SMI
SNMPv2-TC

Objects

77 total
Object Name
cienaCesPortXcvrMIBThis module defines the port XCVR related notifications.
MODULE-IDENTITY
.1.3.6.1.4.1.1271.2.1.9
cienaCesPortXcvrMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.9.1
cienaCesPortXcvr
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.9.1.1
cienaCesPortXcvrTableThis table contains descriptions and settings for each of the physical transceiver devices.
SEQUENCE OF CienaCesPortXcvrEntry
.1.3.6.1.4.1.1271.2.1.9.1.1.1
cienaCesPortXcvrEntryThe transceiver device entry.
CienaCesPortXcvrEntry
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1
cienaCesPortXcvrIdThe ID for the transceiver.
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.1
cienaCesPortXcvrOperStateThe operational state of the transceiver.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.2
cienaCesPortXcvrTemperatureThe temperature of the transceiver. Units are celsius.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.3
cienaCesPortXcvrVccThe voltage of the transceiver. Units are milli voltsro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.4
cienaCesPortXcvrBiasThe bias of the transceiver. Units are milli ampsro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.5
cienaCesPortXcvrRxPowerThe measured receive power of the transceiver. Units are micro watts.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.6
cienaCesPortXcvrHighTempAlarmThresholdIndicates the higher threshold for the temperature alarm. Units are celsius.ro
Integer32 UNITS "celsius"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.7
cienaCesPortXcvrLowTempAlarmThresholdIndicates the lower threshold for the temperature alarm. Units are celsius.ro
Integer32 UNITS "celsius"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.8
cienaCesPortXcvrHighVccAlarmThresholdIndicates the higher threshold for the voltage alarm. Units are milli voltsro
Integer32 UNITS "mV"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.9
cienaCesPortXcvrLowVccAlarmThresholdIndicates the lower threshold for the voltage alarm. Units are milli voltsro
Integer32 UNITS "mV"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.10
cienaCesPortXcvrHighBiasAlarmThresholdIndicates the higher threshold for the bias alarm. Units are milli ampsro
Integer32 UNITS "mA"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.11
cienaCesPortXcvrLowBiasAlarmThresholdIndicates the lower threshold for the bias alarm. Units are milli ampsro
Integer32 UNITS "mA"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.12
cienaCesPortXcvrHighTxPwAlarmThresholdIndicates the higher threshold for the Tx power alarm. Units are micro wattsro
Integer32 UNITS "uW"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.13
cienaCesPortXcvrLowTxPwAlarmThresholdIndicates the lower threshold for the Tx power alarm. Units are micro watts.ro
Integer32 UNITS "uW"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.14
cienaCesPortXcvrHighRxPwAlarmThresholdIndicates the higher threshold for the Rx power alarm. Units are micro watts.ro
Integer32 UNITS "uW"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.15
cienaCesPortXcvrLowRxPwAlarmThresholdIndicates the lower threshold for the Rx power alarm. Units are micro watts.ro
Integer32 UNITS "uW"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.16
cienaCesPortXcvrNotifChassisIndexIndicates the chassis index for the port used for trap definition.ro
Unsigned32 (1)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.17
cienaCesPortXcvrNotifShelfIndexIndicates the shelf index for the port used for trap definition.ro
Unsigned32 (1)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.18
cienaCesPortXcvrNotifSlotIndexIndicates the slot index for the port used for trap definition.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.19
cienaCesPortXcvrNotifPortNumberIndicates the port number for the corresponding PGID used for trap definition.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.20
cienaCesPortXcvrIdentiferTypeType for the transceiver.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.21
cienaCesPortXcvrExtIdentiferTypeExtended identifier type represents for this transceiver.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.22
cienaCesPortXcvrConnectorTypeType of connector: unknown(1) sc(2) fiberChannelStyle1(3) fiberChannelStyle2(4) bnc/tnc(5) coaxialHeader(6) fiberJack(7) lc(8) mt-rj(9) mu(10) sg(11) opticalPitTail(12) reserved(13..32) hssdc(33) copperPitTail(34) reserved(35..128) vendorSpecific(129..256)ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.23
cienaCesPortXcvrTypeType of transceiver.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.24
cienaCesPortXcvrVendorNameString containing this transceiver's vendor name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.25
cienaCesPortXcvrVendorOUIString containing this transceiver's vendor OUI.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.26
cienaCesPortXcvrVendorPartNumString containing this transceiver's vendor part number.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.27
cienaCesPortXcvrRevNumString containing this tranceiver's part revision number.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.28
cienaCesPortXcvrSerialNumString containing this tranceiver's part serial number.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.29
cienaCesPortXcvrMfgDateString containing this transceiver's manufactured date.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.30
cienaCesPortXcvrWaveLengthThe wavelength of the transceiver. Units are nano meter.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.31
cienaCesPortXcvrTxStateIndicates whether this transceiver is currently set to transmit.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.32
cienaCesPortXcvrTxFaultStatusIndicates the fault status of this transceiver.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.33
cienaCesPortXcvrAdminStateThe administrative state of the transceiver.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.34
cienaCesPortXcvrTxOutputPowerThe measured transmitted output power of the transceiver. Units are micro watts.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.35
cienaCesPortXcvrFecModeThis represents the transceiver's FEC Mode. gfec means generic forward error correction, efec means enhanced forward error correction.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.36
cienaCesPortXcvrNotifPortNameIndicates the port name for the corresponding PGID used for trap definition.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.37
cienaCesPortXcvrPwrUsageThe measured power consumed by the transceiver. Units are micro watts.ro
Unsigned32 UNITS "uW"
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.38
cienaCesPortXcvrPortNumberIndicates the port name for the corresponding PGIDro
Unsigned32
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.39
cienaCesPortXcvrPortNameIndicates the port name for the corresponding PGIDro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.9.1.1.1.1.40
cienaCesPortXcvrNotif
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.9.1.2
cienaCesPortXcvrEventTypeIndicates if the transceiver specified by the ciena54XXPortXcvrId has come up, gone down or has been selected.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.2.1
cienaCesPortXcvrErrorTypeIndicates if the transceiver specified by the cienaCesPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if the transceiver has been detected faulted; otherwise it returns 'none'.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.9.1.2.2
cienaCesPortXcvrMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.9.3
cienaCesPortXcvrMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.9.3.1
cienaCesPortXcvrMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.9.3.2
cienaCesPortXcvrMIBNotificationPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.2.9
cienaCesPortXcvrMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.2.9.0
cienaCesPortXcvrRemovedNotificationA cienaCesPortXcvrRemovedNotification is sent if the transceiver has been removed. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.1
cienaCesPortXcvrInsertedNotificationA cienaCesPortXcvrInsertedNotification is sent if the transceiver has been inserted. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.2
cienaCesPortXcvrErrorTypeNotificationA cienaCesPortXcvrErrorTypeNotification is sent if the transceiver is detected to be faulted. The reason for the failure is specified by cienaCesPortXcvrErrorType. To enable the device to send this notification: cienaCesPortXcvrErrorTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrErrorType and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.5
cienaCesPortXcvrTempHighNotificationA cienaCesPortXcvrTempHighNotification is sent if the transceiver temperature exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.6
cienaCesPortXcvrTempLowNotificationA cienaCesPortXcvrTempLowNotification is sent if the transceiver temperature falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.7
cienaCesPortXcvrTempNormalNotificationA cienaCesPortXcvrTempNormalNotification is sent when the transceiver temperature returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.8
cienaCesPortXcvrVoltageHighNotificationA cienaCesPortXcvrVoltageHighNotification is sent if the transceiver voltage exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.9
cienaCesPortXcvrVoltageLowNotificationA cienaCesPortXcvrVoltageLowNotification is sent if the transceiver voltage falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.10
cienaCesPortXcvrVoltageNormalNotificationA cienaCesPortXcvrVoltageNormalNotification is sent when the transceiver voltage returns back to normal state. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.11
cienaCesPortXcvrBiasHighNotificationA cienaCesPortXcvrBiasHighNotification is sent if the transceiver bias exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.12
cienaCesPortXcvrBiasLowNotificationA cienaCesPortXcvrBiasLowNotification is sent if the transceiver bias falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.13
cienaCesPortXcvrBiasNormalNotificationA cienaCesPortXcvrBiasNormalNotification is sent when the transceiver bias returns to normal state. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.14
cienaCesPortXcvrTxPowerHighNotificationA cienaCesPortXcvrTxPowerHighNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.15
cienaCesPortXcvrTxPowerLowNotificationA cienaCesPortXcvrTxPowerLowNotification is sent if the transceiver TxPower falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.16
cienaCesPortXcvrTxPowerNormalNotificationA cienaCesPortXcvrTxPowerNormalNotification is sent when the transceiver TxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.17
cienaCesPortXcvrRxPowerHighNotificationA cienaCesPortXcvrRxPowerHighNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.18
cienaCesPortXcvrRxPowerLowNotificationA cienaCesPortXcvrRxPowerLowNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.19
cienaCesPortXcvrRxPowerNormalNotificationA cienaCesPortXcvrRxPowerNormalNotification is sent when the transceiver RxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.20
cienaCesPortXcvrSpeedInfoMissingNotificationA cienaCesPortXcvrSpeedInfoMissingNotification is sent if the transceiver speed information is not found. To enable the device to send this notification: cienaCesPortXcvrSpeedInfoTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.21
cienaCesPortXcvrUncertifiedNotificationA cienaCesPortXcvrUncertifiedNotification is sent if the transceiver is not certified for use by Ciena. To enable the device to send this notification: cienaCesPortXcvrUncertifiedTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cesPortAllTrapState need to be set to enabled. cienaCesPortXcvrUncertifiedTrapState is set to disabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.22
cienaCesPortXcvrRxPowerHighWarningNotificationA cienaCesPortXcvrRxPowerHighWarningNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.23
cienaCesPortXcvrRxPowerLowWarningNotificationA cienaCesPortXcvrRxPowerLowWarningNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.24
cienaCesPortXcvrTxPowerHighWarningNotificationA cienaCesPortXcvrTxPowerHighWarningNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.25
cienaCesPortXcvrTxPowerLowWarningNotificationA cienaCesPortXcvrTxPowerLowWarningNotification is sent if the transceiver TxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.9.0.26

CIENA-CES-PORT-XCVR-MIB Technical Reference Overview

The CIENA-CES-PORT-XCVR-MIB SNMP MIB module published by Ciena defines 77 managed OID objects, including 42 scalar/column metrics, 1 SNMP tables, and 24 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.9. Key tabular structures include cienaCesPortXcvrTable. Monitored SNMP traps/notifications include cienaCesPortXcvrRemovedNotification, cienaCesPortXcvrInsertedNotification, cienaCesPortXcvrErrorTypeNotification, cienaCesPortXcvrTempHighNotification, cienaCesPortXcvrTempLowNotification, cienaCesPortXcvrTempNormalNotification.

Key OID Definitions in CIENA-CES-PORT-XCVR-MIB

cienaCesPortXcvrTable.1.3.6.1.4.1.1271.2.1.9.1.1.1

This table contains descriptions and settings for each of the physical transceiver devices.

cienaCesPortXcvrRemovedNotification.1.3.6.1.4.1.1271.2.2.9.0.1

A cienaCesPortXcvrRemovedNotification is sent if the transceiver has been removed. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrInsertedNotification.1.3.6.1.4.1.1271.2.2.9.0.2

A cienaCesPortXcvrInsertedNotification is sent if the transceiver has been inserted. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrErrorTypeNotification.1.3.6.1.4.1.1271.2.2.9.0.5

A cienaCesPortXcvrErrorTypeNotification is sent if the transceiver is detected to be faulted. The reason for the failure is specified by cienaCesPortXcvrErrorType. To enable the device to send this notification: cienaCesPortXcvrErrorTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, cienaCesPortXcvrErrorType and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrTempHighNotification.1.3.6.1.4.1.1271.2.2.9.0.6

A cienaCesPortXcvrTempHighNotification is sent if the transceiver temperature exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrTempLowNotification.1.3.6.1.4.1.1271.2.2.9.0.7

A cienaCesPortXcvrTempLowNotification is sent if the transceiver temperature falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrTempNormalNotification.1.3.6.1.4.1.1271.2.2.9.0.8

A cienaCesPortXcvrTempNormalNotification is sent when the transceiver temperature returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrVoltageHighNotification.1.3.6.1.4.1.1271.2.2.9.0.9

A cienaCesPortXcvrVoltageHighNotification is sent if the transceiver voltage exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrVoltageLowNotification.1.3.6.1.4.1.1271.2.2.9.0.10

A cienaCesPortXcvrVoltageLowNotification is sent if the transceiver voltage falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrVoltageNormalNotification.1.3.6.1.4.1.1271.2.2.9.0.11

A cienaCesPortXcvrVoltageNormalNotification is sent when the transceiver voltage returns back to normal state. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrBiasHighNotification.1.3.6.1.4.1.1271.2.2.9.0.12

A cienaCesPortXcvrBiasHighNotification is sent if the transceiver bias exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

cienaCesPortXcvrBiasLowNotification.1.3.6.1.4.1.1271.2.2.9.0.13

A cienaCesPortXcvrBiasLowNotification is sent if the transceiver bias falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber and cienaCesPortXcvrNotifPortName.

More MIBs from Ciena

Browse all CienaMIBs →
CIENA-CES-PM

The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.

2445 objects→
CIENA-CES-MPLS-MIB

The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.

895 objects→
CIENA-WS-PM-MIB

The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.

805 objects→
CIENA-CES-CHASSIS-MIB

The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.

457 objects→
CIENA-CES-DATAPLANE-MIB

The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.

360 objects→
CIENA-CES-CFM-MIB

The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.

332 objects→