CIENA-CES-OSPF-MIB
The CIENA-CES-OSPF-MIB enables monitoring and management of Open Shortest Path First (OSPF) routing protocol instances and link-state database states on CIENA Carrier Ethernet Service (CES) platforms. It provides specific OID access to OSPF interface parameters, neighbor adjacency states, and routing table metrics for troubleshooting and capacity planning within CIENA's transport network infrastructure.
Imported Objects
Objects
40 total| Object Name |
|---|
cienaCesOspfMIBThis MIB module is for the Extension of the OSPF MIB for CIENA Products MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.19 |
cienaCesOspfMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.19.1 |
cienaCesOspfGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.19.1.1 |
cienaCesOspfRFC1583CompIndicates metrics used to choose among multiple
AS-external-LSAs. When RFC1583Compatibility is set to
TRUE, only cost is used when choosing among
multiple AS-external-LSAs advertising the same
destination. When RFC1583Compatibility is set to
FALSE, preference is driven first by type of
path using cost only to break ties.
In order to minimize the chance of routing loops, all OSPF
routers in an OSPF routing domain should have
RFC1583Compatibility set identically. When there are routers
present that have not been updated with the functionality
specified in RFC2328 Section 16.4.1, all routers should
have RFC1583Compatibility set to TRUE. Otherwise, all
routers should have RFC1583Compatibility set to FALSE,
preventing all routing loops.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.19.1.1.1 |
cienaCesOspfOperStatusThe current operational state of OSPF.ro OspfOperStatus .1.3.6.1.4.1.1271.2.1.19.1.1.2 |
cienaCesOspfOpaqueLsaSupportThe router's support for Opaque LSA types. This value cannot be
changed when OSPF is active and operStatus is up.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.19.1.1.3 |
cienaCesOspfTrafficEngSupportThe router's support for OSPF traffic engineering.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.19.1.1.4 |
cienaCesOspfExtOpLsaCountThe number of type-11 LSAs in the external database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.1.5 |
cienaCesOspfExtOpLsaCksumSumThe 32 bit sum of LS checksums of all type-11 LSAs in the
external Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.1.6 |
cienaCesOspfNumUpdPendingThe number of pending updates to the Link State Database.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.19.1.1.7 |
cienaCesOspfNumUpdMergedThe number of updates that have been merged into the Link State
Database since the last routing calculation.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.19.1.1.8 |
cienaCesOspfNumCksumsPendingThe number of LSAs in the Link State Database which are now due to
have their checksum checked.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.19.1.1.9 |
cienaCesOspfCalcMaxDelayThe maximum delay before the routing table is
recalculated following a change to the Link State
Database. (Recalculation is delayed to reduce the
frequency of recalculations of the routing table).
This parameter has units of milliseconds. A value of
0 indicates that a routing calculation will
immediately follow an update to the database.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.1271.2.1.19.1.1.10 |
cienaCesOspfRouterIdOspf router ID.ro IpAddress .1.3.6.1.4.1.1271.2.1.19.1.1.11 |
cienaCesOspf OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.19.1.2 |
cienaCesOspfAreaTableInformation describing the configured parameters
and cumulative statistics of the router's attached
areas. SEQUENCE OF CienaCesOspfAreaEntry .1.3.6.1.4.1.1271.2.1.19.1.2.1 |
cienaCesOspfAreaEntryInformation describing the configured parameters
and cumulative statistics of one of the router's
attached areas. CienaCesOspfAreaEntry .1.3.6.1.4.1.1271.2.1.19.1.2.1.1 |
cienaCesOspfAreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone. AreaID (OSPF-MIB) .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.1 |
cienaCesOspfAreaTransitCapabilityThis parameter indicates whether the area can carry data
traffic that neither originates nor terminates in the area
itself. This parameter is calculated when the area's shortest-path
tree is built.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.2 |
cienaCesOspfAreaRtrLsaCountThe number of LSAs with LS type-1 in this area's Link State
Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.3 |
cienaCesOspfAreaRtrLsaCksumSumThe 32 bit sum of LS checksums of all LSAs with LS type-1 in this
area's Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.4 |
cienaCesOspfAreaNetLsaCountThe number of LSAs with LS type-2 in this area's Link State
Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.5 |
cienaCesOspfAreaNetLsaCksumSumThe 32 bit sum of LS checksums of all LSAs with LS type-2 in this
area's Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.6 |
cienaCesOspfAreaSummLsaCountThe number of LSAs with LS type-3 in this area's Link State
Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.7 |
cienaCesOspfAreaSummLsaCksumSumThe 32 bit sum of LS checksums of all LSAs with LS type-3 in this
area's Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.8 |
cienaCesOspfAreaSummAsLsaCountThe number of LSAs with LS type-4 in this area's Link State
Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.9 |
cienaCesOspfAreaSummAsLsaCksumSumThe 32 bit sum of LS checksums of all LSAs with LS type-4 in this
area's Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.10 |
cienaCesOspfAreaNssaLsaCountThe number of LSAs with LS type-7 in this area's Link State
Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.11 |
cienaCesOspfAreaNssaLsaCksumSumThe 32 bit sum of LS checksums of all LSAs with LS type-7 in this
area's Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.12 |
cienaCesOspfAreaOpLsaCountThe number of LSAs with LS type-10 in this area's Link State
Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.13 |
cienaCesOspfAreaOpLsaCksumSumThe 32 bit sum of LS checksums of all LSAs with LS type-10 in this
area's Link State Database.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.1.1.14 |
cienaCesOspfIfTableThe OSPF interface table describes the interfaces from the viewpoint
of OSPF. SEQUENCE OF CienaCesOspfIfEntry .1.3.6.1.4.1.1271.2.1.19.1.2.2 |
cienaCesOspfIfEntryThe OSPF interface entry describes one interface from the viewpoint
of OSPF. CienaCesOspfIfEntry .1.3.6.1.4.1.1271.2.1.19.1.2.2.1 |
cienaCesOspfIfIpAddressThe IP address of this OSPF interface. IpAddress .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.1 |
cienaCesOspfAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces, this
variable takes the value 0 on interfaces with
IP addresses, and the corresponding value of
ifIndex for interfaces having no IP address. Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.2 |
cienaCesOspfIfLsaCountThe total number of link-local link state advertisements
in this interface's link-local Link State Database.ro Gauge32 .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.3 |
cienaCesOspfIfLsaCksumSumThe 32-bit unsigned sum of the link-state
advertisements' LS checksums contained in this
interface's link-local Link State Database.
The sum can be used to determine if there has
been a change in the interface's Link State Database,
and to compare the interface Link State Database of
routers attached to the same subnet.ro Integer32 .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.4 |
cienaCesOspfIfOperStatusThe current operational state of this interface.ro OspfOperStatus .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.5 |
cienaCesOspfIfNetMaskThe subnet mask associated with the IP address of this entry. The
value of the mask is an IP address with all the network bits set to 1
and all the hosts bits set to 0.ro IpAddress .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.6 |
cienaCesOspfIfTransmitTimerDelayThe time this interface delays a LSU packet, in order to
add more LSAs to the packet before sending. Setting this
correctly can reduce the network traffic. This is configurable
on a per-interface basis.ro INTEGER .1.3.6.1.4.1.1271.2.1.19.1.2.2.1.7 |
CIENA-CES-OSPF-MIB Technical Reference Overview
The CIENA-CES-OSPF-MIB SNMP MIB module published by Ciena defines 40 managed OID objects, including 32 scalar/column metrics, 2 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.19. Key tabular structures include cienaCesOspfAreaTable, cienaCesOspfIfTable.
Key OID Definitions in CIENA-CES-OSPF-MIB
.1.3.6.1.4.1.1271.2.1.19.1.2.1Information describing the configured parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.1271.2.1.19.1.2.2The OSPF interface table describes the interfaces from the viewpoint of OSPF.
.1.3.6.1.4.1.1271.2.1.19.1.1.1Indicates metrics used to choose among multiple AS-external-LSAs. When RFC1583Compatibility is set to TRUE, only cost is used when choosing among multiple AS-external-LSAs advertising the same destination. When RFC1583Compatibility is set to FALSE, preference is driven first by type of path using cost only to break ties. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in RFC2328 Section 16.4.1, all routers should have RFC1583Compatibility set to TRUE. Otherwise, all routers should have RFC1583Compatibility set to FALSE, preventing all routing loops.
.1.3.6.1.4.1.1271.2.1.19.1.1.2The current operational state of OSPF.
.1.3.6.1.4.1.1271.2.1.19.1.1.3The router's support for Opaque LSA types. This value cannot be changed when OSPF is active and operStatus is up.
.1.3.6.1.4.1.1271.2.1.19.1.1.4The router's support for OSPF traffic engineering.
.1.3.6.1.4.1.1271.2.1.19.1.1.5The number of type-11 LSAs in the external database.
.1.3.6.1.4.1.1271.2.1.19.1.1.6The 32 bit sum of LS checksums of all type-11 LSAs in the external Link State Database.
.1.3.6.1.4.1.1271.2.1.19.1.1.7The number of pending updates to the Link State Database.
.1.3.6.1.4.1.1271.2.1.19.1.1.8The number of updates that have been merged into the Link State Database since the last routing calculation.
.1.3.6.1.4.1.1271.2.1.19.1.1.9The number of LSAs in the Link State Database which are now due to have their checksum checked.
.1.3.6.1.4.1.1271.2.1.19.1.1.10The maximum delay before the routing table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of recalculations of the routing table). This parameter has units of milliseconds. A value of 0 indicates that a routing calculation will immediately follow an update to the database.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.