CIENA-CES-MODULE-MIB
AI MIB Summary
The CIENA-CES-MODULE-MIB enables the configuration and monitoring of Carrier Ethernet Service (CES) module parameters and the generation of associated module-specific notifications on Ciena transport equipment. This module facilitates the management of CES circuit attributes, including operational status, performance thresholds, and alarm states for Ethernet over TDM or packet-based services.
This module defines the module configuration objects and also the objects required for module related notifications.
Main OID:
cienaCesModuleMIB.1.3.6.1.4.1.1271.2.1.2
134
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
134 total| Object Name |
|---|
cienaCesModuleMIBThis module defines the module configuration objects and also the objects required for
module related notifications. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.2 |
cienaCesModuleMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.1 |
cienaCesModuleGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.1.1 |
cienaCesModuleGlobalPostStateThis object indicates the global POST state for the system.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.2.1.1.1 |
cienaCesModule OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.1.2 |
cienaCesModuleTableThe (conceptual) table listing the modules configured and detected. SEQUENCE OF CienaCesModuleEntry .1.3.6.1.4.1.1271.2.1.2.1.2.1 |
cienaCesModuleEntryAn entry (conceptual row) in the cienaCesModuleTable. CienaCesModuleEntry .1.3.6.1.4.1.1271.2.1.2.1.2.1.1 |
cienaCesModuleChassisIndxThis object indicates the chassis index for the module. Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.1 |
cienaCesModuleShelfIndxThis object indicates the shelf index for the module. Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.2 |
cienaCesModuleSlotIndxThis object indicates the slot index for the module. Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.3 |
cienaCesModuleModelThis object indicates the module model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.4 |
cienaCesModuleTypeThis object indicates whether this is a single module, control timing module,
I/O module or fabric module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.5 |
cienaCesModuleDescriptionThis object indicates the description of the module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.6 |
cienaCesModuleAdminStateThis object indicates the administrative state of the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.7 |
cienaCesModuleOperStateThis object indicates the operational state of the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.8 |
cienaCesModuleProtectionRoleThis object indicates the redundant administrative state of the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.9 |
cienaCesModuleStandbyStatusThis object indicates the standby status of the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.10 |
cienaCesModuleLastRebootReasonThis object indicates the last reboot reason of the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.11 |
cienaCesModuleAdminPostStateThis object sets the POST administrative state for the given module.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.12 |
cienaCesModuleOperPostStateThis object indicates the POST operational state for the given module.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.13 |
cienaCesModuleTrapStateThis object indicates whether the device generates notifications for this module.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.16 |
cienaCesModuleChassisNotifIndxThis object indicates the chassis index for the module used in trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.17 |
cienaCesModuleShelfNotifIndxThis object indicates the shelf index for the module used in trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.18 |
cienaCesModuleSlotNotifIndxThis object indicates the slot index for the module used in trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.19 |
cienaCesModuleSlotNameThis object indicates the slot name that the module is installed in.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.1.1.20 |
cienaCesModuleDescriptionTableThe (conceptual) table listing the description of physical attributes of the modules. SEQUENCE OF CienaCesModuleDescriptionEntry .1.3.6.1.4.1.1271.2.1.2.1.2.2 |
cienaCesModuleDescriptionEntryAn entry (conceptual row) in the cienaCesModuleDescriptionTable. CienaCesModuleDescriptionEntry .1.3.6.1.4.1.1271.2.1.2.1.2.2.1 |
cienaCesModuleDescriptionBoardNameThis object indicates the module name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.1 |
cienaCesModuleDescriptionBoardPartNumThis object indicates the board part number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.2 |
cienaCesModuleDescriptionBoardSerialNumThis object indicates the board serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.3 |
cienaCesModuleDescriptionBoardDescThis object indicates the board description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.4 |
cienaCesModuleDescriptionHwVersionThis object indicates the module hardware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.5 |
cienaCesModuleDescriptionMfgDateThis object indicates the module manufacturing date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.6 |
cienaCesModuleDescriptionBaseMacThis object indicates the module base MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.7 |
cienaCesModuleDescriptionUpTimeThis object indicates the module up time (in hundredths of a second) since the
module was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.8 |
cienaCesModuleDescriptionTotalNumPortsThis object indicates the number of ports on this module.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.2.1.9 |
cienaCesModuleTempSensorTableThe (conceptual) table listing the temperature sensors of the modules. SEQUENCE OF CienaCesModuleTempSensorEntry .1.3.6.1.4.1.1271.2.1.2.1.2.3 |
cienaCesModuleTempSensorEntryAn entry (conceptual row) in the cienaCesModuleTempSensorTable. CienaCesModuleTempSensorEntry .1.3.6.1.4.1.1271.2.1.2.1.2.3.1 |
cienaCesModuleSensorIndxThis object indicates the unique index in the table along with cienaCesModuleIndx. Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.1 |
cienaCesModuleSensorDescriptionThis object indicates the sensor description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.2 |
cienaCesModuleSensorCurrentTempThis object indicates the current temperature of the module.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.3 |
cienaCesModuleSensorHighTempThis object indicates the highest temperature this module
has reached since the last reboot.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.4 |
cienaCesModuleSensorLowTempThis object indicates the lowest temperature this module
has reached since the last rebootro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.5 |
cienaCesModuleSensorHighTempThresholdThis object indicates the high threshold for this module temperature.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.6 |
cienaCesModuleSensorLowTempThresholdThis object indicates the low threshold for this module temperature.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.7 |
cienaCesModuleSensorNotifIndxThis object indicates the unique index in the table used for trap definition.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.3.1.8 |
cienaCesSwModule OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.1.2.4 |
cienaCesGlobalSwStateThe global software state of the system.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.4.1 |
cienaCesModuleSwTableThe (conceptual) table listing the software package attributes on the modules. SEQUENCE OF CienaCesModuleSwEntry .1.3.6.1.4.1.1271.2.1.2.1.2.4.2 |
cienaCesModuleSwEntryAn entry (conceptual row) in the cienaCesModuleSwTable. CienaCesModuleSwEntry .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1 |
cienaCesModuleSwStateThe software state on the module.ro SwModuleState .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.1 |
cienaCesModuleSwRunningReleaseSoftware package version that is currently running on the module.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.2 |
cienaCesModuleSwRunningReleasePartitionRelease partition where the current running release is installed.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.3 |
cienaCesModuleSwReleasePartition0PkgRelease partition 0 software package version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.4 |
cienaCesModuleSwReleasePartition0PkgStatusRelease partition 0 software package status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.5 |
cienaCesModuleSwReleasePartition1PkgRelease partition 1 software package version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.6 |
cienaCesModuleSwReleasePartition1PkgStatusRelease partition 1 software package status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.7 |
cienaCesModuleSwReleasePartition2PkgRelease partition 2 software package version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.8 |
cienaCesModuleSwReleasePartition2PkgStatusRelease partition 2 software package status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.9 |
cienaCesModuleSwBank0KernelVersionBank0 kernel version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.10 |
cienaCesModuleSwBank0KernelStatusBank0 kernel software status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.11 |
cienaCesModuleSwBank1KernelVersionBank1 kernel version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.12 |
cienaCesModuleSwBank1KernelStatusBank1 kernel status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.13 |
cienaCesModuleSwBank0UbootVersionBank0 U-boot version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.14 |
cienaCesModuleSwBank0UbootStatusBank0 U-boot status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.15 |
cienaCesModuleSwBank1UbootVersionBank1 U-boot version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.16 |
cienaCesModuleSwBank1UbootStatusBank0 U-boot status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.17 |
cienaCesModuleSwUbootGoldVersionU-boot Gold version.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.18 |
cienaCesModuleSwUbootGoldStatusU-boot Gold status.ro SwPkgStatus .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.19 |
cienaCesModuleSwMIBVerThis MIB object shows the MIB version currently supported.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.20 |
cienaCesModulePOSTErrorTableThe (conceptual) table for viewing POST error on the modules. SEQUENCE OF CienaCesModulePOSTErrorEntry .1.3.6.1.4.1.1271.2.1.2.1.2.5 |
cienaCesModulePOSTErrorEntryAn entry (conceptual row) in the cienaCesModulePOSTErrorResultsTable. CienaCesModulePOSTErrorEntry .1.3.6.1.4.1.1271.2.1.2.1.2.5.1 |
cienaCesModulePOSTErrorIndexIndex of the POST error for the module. INTEGER .1.3.6.1.4.1.1271.2.1.2.1.2.5.1.1 |
cienaCesModulePOSTErrorDescriptionA description of the module POST error.ro OCTET STRING .1.3.6.1.4.1.1271.2.1.2.1.2.5.1.2 |
cienaCesModulePOSTErrorSeveritySeverity of the POST error for the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.5.1.3 |
cienaCesModulePOSTErrorScopeScope of the POST error for the module.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.5.1.4 |
cienaCesModulePOSTScopeIndexWhen scope is a port this object identifies the port number.ro INTEGER .1.3.6.1.4.1.1271.2.1.2.1.2.5.1.5 |
cienaCesModuleResourceHealthTableTable listing the health information of dataplane resources. SEQUENCE OF CienaCesModuleResourceHealthEntry .1.3.6.1.4.1.1271.2.1.2.1.2.6 |
cienaCesModuleResourceHealthEntryAn entry in the cienaCesModuleResourceHealthTable. CienaCesModuleResourceHealthEntry .1.3.6.1.4.1.1271.2.1.2.1.2.6.1 |
cienaCesModuleResourceHealthSubCategoryThe sub-category of the dataplane resource being monitored.
- 'none' is an enumeration placeholder. Enumeration .1.3.6.1.4.1.1271.2.1.2.1.2.6.1.1 |
cienaCesModuleResourceDeviceIndxIndex of the device being monitored. Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.6.1.2 |
cienaCesModuleResourceHealthStateHealth state of the dataplane resource being monitored.ro TceHealthStatus .1.3.6.1.4.1.1271.2.1.2.1.2.6.1.3 |
cienaCesModuleResourceHealthCurrMeasurementCurrent value of the dataplane resource being monitored.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.6.1.4 |
cienaCesModuleResourceHealthMaxMeasurementThe maximum recorded value of the dataplane resource being monitored.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.6.1.5 |
cienaCesModuleResourceHealthMaxThresholdThe maximum possible value for the dataplane resource being monitored.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.2.6.1.6 |
cienaCesModuleIDPTableThe (conceptual) table listing the description of ID Prom contents of the modules. SEQUENCE OF CienaCesModuleIDPEntry .1.3.6.1.4.1.1271.2.1.2.1.2.8 |
cienaCesModuleIDPEntryAn entry (conceptual row) in the cienaCesModuleIDPTable. CienaCesModuleIDPEntry .1.3.6.1.4.1.1271.2.1.2.1.2.8.1 |
cienaCesModuleIDPEthBaseMacThis object indicates the module Ethernet Base MAC address stored in the module IDP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.1 |
cienaCesModuleIDPEthBaseMacRangeThis object indicates the Ethernet MAC address range stored in the module IDP.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.2 |
cienaCesModuleIDPModuleSerialNumberThis object indicates the Module Serial Number stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.3 |
cienaCesModuleIDPModelPartNumberThis object indicates the Model Part Number stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.4 |
cienaCesModuleIDPModelRevisionThis object indicates the Model Revision stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.5 |
cienaCesModuleIDPProductIDThis object indicates the Module Product ID stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.6 |
cienaCesModuleIDPMfgDateThis object indicates the Manufactured Date stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.7 |
cienaCesModuleIDPCleiCodeThis object indicates the CLEI Code stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.8 |
cienaCesModuleIDPBarcodeThis object indicates the Barcode stored in the module IDP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.9 |
cienaCesModuleIDPSWCompatThis object indicates the Software Compatibility Number stored in the module IDP.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.10 |
cienaCesModuleIDPFTCThis object indicates the Functional Test Count stored in the module IDP.ro Integer32 .1.3.6.1.4.1.1271.2.1.2.1.2.8.1.11 |
cienaCesModuleNotifAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.1.3 |
cienaCesModuleSystemProtectionModeThis object indicates the protection mode of the system.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.3.1 |
cienaCesModuleSwitchOverReasonThis object indicates the reason the SwitchOver happened. The following combinations
determine the value of this object:
CTM failure - Deprov mode - Cold FailOver
User Initiated - Deprov Mode - Cold SwitchOver
CTM failure - Audit mode - Hot FailOver
User initiated - Audit mode - Hot SwitchOver.ro Enumeration .1.3.6.1.4.1.1271.2.1.2.1.3.2 |
cienaCesModuleNotifTableThe (conceptual) table to define the notification variable bindings. SEQUENCE OF CienaCesModuleNotifEntry .1.3.6.1.4.1.1271.2.1.2.1.3.3 |
cienaCesModuleNotifEntryAn entry (conceptual row) in the cienaCesModuleNotifEntryTable. CienaCesModuleNotifEntry .1.3.6.1.4.1.1271.2.1.2.1.3.3.1 |
cienaCesModuleHealthCategoryThis object indicates the health category that the Health Manager
monitors on the module.ro TceHealthCategory .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.1 |
cienaCesModuleHealthSubCategoryThis object indicates the health sub category that the Health Manager
monitors on the module.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.2 |
cienaCesModuleHealthStatusThis object indicates the current health status of health category and
its sub category being monitored on the module.ro TceHealthStatus .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.3 |
cienaCesModuleHealthStatusLastThis object indicates the last known health status of health category and
its sub category being monitored on the module.ro TceHealthStatus .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.4 |
cienaCesModuleHealthOriginTypeThis object indicates the origin of the health status notification.ro HealthOriginType .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.5 |
cienaCesModuleHealthOriginNameThis object indicates the origin name of the health status notification.ro DisplayString .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.6 |
cienaCesModuleHealthOriginUnitIdThis object indicates the origin id of the health notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.2.1.3.3.1.7 |
cienaCesModuleConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.2 |
cienaCesModuleMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.2.1 |
cienaCesModuleMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.2.2.2 |
cienaCesModuleMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.3 |
cienaCesModuleMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.3.0 |
cienaCesModuleStateChangeNotificationA cienaCesModuleStateChange notification is sent when the operational
state of the module is changed.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleTrapState for the module needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleAdminState, and cienaCesModuleOperState. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.1 |
cienaCesModuleHealthStatusUnknownNotificationThis notification is sent whenever the Health Manager detects a status change to unknown.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleTrapState for the module needs to be set to enabled.
- cienaCesModuleAllModulesHealthTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx,
cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName,
cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory,
cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.2 |
cienaCesModuleHealthStatusWarningNotificationThis notification is sent whenever the Health Manager detects a status change to warning.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleTrapState for the module needs to be set to enabled.
- cienaCesModuleAllModulesHealthTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName,
cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory,
cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and
cienaCesModuleHealthStatusLast. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.3 |
cienaCesModuleHealthStatusFaultedNotificationThis notification is sent whenever the Health Manager detects a status change to faulted.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleTrapState for the module needs to be set to enabled.
- cienaCesModuleAllModulesHealthTrapState needs to be set to enabled
The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx,
cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName,
cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory,
cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.4 |
cienaCesModuleHealthStatusDegradedNotificationThis notification is sent whenever the Health Manager detects a status change to degraded.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleTrapState for the module needs to be set to enabled.
- cienaCesModuleAllModulesHealthTrapState needs to be set to enabled
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName,
cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory,
cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus,
and cienaCesModuleHealthStatusLast. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.5 |
cienaCesModuleHealthStatusGoodNotificationThis notification is sent whenever the Health Manager detects a status change to normal.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleTrapState for the module needs to be set to enabled.
- cienaCesModuleAllModulesHealthTrapState needs to be set to enabled
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName,
cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory,
cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and
cienaCesModuleHealthStatusLast. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.6 |
cienaCesModuleSensorHighTempNotificationThis notification is sent when the cienaCesModuleSensor temperature exceeds the high
temperature threshold for the module.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleSensorTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription,
cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.7 |
cienaCesModuleSensorLowTempNotificationThis notification is sent when the cienaCesModuleSensor falls below the low
temperature threshold for the module.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleSensorTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx,
cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and
cienaCesModuleSensorLowTempThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.8 |
cienaCesModuleSensorNormalTempNotificationThis notification is sent if the cienaCesModule temperature changes
from previously reported high or low temperature exceeding thresholds to normal temperature.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleSensorTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription,
cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp,
and cienaCesModuleSensorHighTemp. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.9 |
cienaCesModuleHASwitchOverNotificationThis notification is sent for CTM switchover.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleHATrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleSwitchOverReason, cienaCesModuleAdminState,
and cienaCesModuleOperState. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.10 |
cienaCesModuleProtectionModeColdNotificationThis notification is sent when the protection mode of the system changes to cold.
A COLD protection level is the lowest level of protection. It implies that the secondary CTM is ready to assume the
function of the primary CTM but a failure causing a failover would be service impacting. The secondary CTM has been
synchronized with the same software package, configuration files, etc such that it will return the same state
as the previous primary CTM.
The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM
has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will
immediately assume primary status, finish its initialization and reboot the PSLMs. The primary CTM will
reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost
on a failover as configuration changes are propagated to the secondary CTM configuration.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleProtectionModeTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.11 |
cienaCesModuleProtectionModeWarmNotificationThis notification is sent when the protection mode of the system changes to warm.
This state is not supported on the 5410 platform.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleProtectionModeTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.12 |
cienaCesModuleProtectionModeUnprotectedNotificationThis notification is sent when the protection mode of the system changes to unprotected.
A protection level of unprotected implies that there is no secondary CTM present in the system or
that the current secondary CTM is not in a state to provide any protection. In the case of the CTM failure,
the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleProtectionModeTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.13 |
cienaCesModuleProtectionModeHotNotificationThis notification is sent when the protection mode of the system changes to hot.
A HOT protection level is the highest level of protection. It implies that the secondary CTM is ready to assume the
function of the primary CTM and a failure causing a failover would NOT be service impacting. The secondary CTM has been
synchronized with the same software package, configuration files, etc such that it will return the same state
as the previous primary CTM.
The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM
has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will
immediately assume primary status, finish its initialization and audit the PSLMs. All current established traffic patterns
will be maintained with a minimal loss of traffic. Any unsaved configuration changes will NOT be lost
on a failover as configuration changes are propagated to the secondary CTM configuration.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleProtectionModeTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.14 |
cienaCesModulePostErrorNotificationThis notification is sent when a module POST error is detected.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModulePOSTErrorTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and
cienaCesModulePOSTErrorDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.15 |
cienaCesModuleFastReloadUnsuccessfulNotificationThis notification is sent when the deprov (cold switchover or failover) fails.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleHATrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleAdminState, and cienaCesModuleOperState. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.16 |
cienaCesModuleHitlessModeUnsuccessfulNotificationThis notification is sent when the audit (hot failover or switchover) fails.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled.
- cienaCesModuleHATrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include:
cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx,
cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx,
cienaCesModuleAdminState, and cienaCesModuleOperState. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.17 |
cienaCesModuleSwitchFabricDisruptedUnrecoverableNotificationThis notification is sent when the switch fabric detects a game-over failure and the system
cannot automatically correct without resetting certain fabric subsystems. This kind of a
disruption can cause a major service interruption.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled
- cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx,
and cienaCesModuleSlotNotifIndx. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.18 |
cienaCesModuleSwitchFabricDisruptedRecoverableNotificationThis notification is sent when the switch fabric detects game-over failure and the system
can automatically correct it.
To enable the device to send this notification:
- cienaCesModuleAllModulesTrapState needs to be set to enabled
- cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled.
The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx,
and cienaCesModuleSlotNotifIndx. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.3.0.19 |