CIENA-CES-MGMT-INTERFACE-MIB
The CIENA-CES-MGMT-INTERFACE-MIB manages and monitors the operational status, configuration parameters, and fault notifications for Carrier Ethernet Service (CES) management interfaces on Ciena transport equipment. It provides visibility into interface states, error counters, and administrative controls specific to CES circuit provisioning and maintenance.
Imported Objects
Objects
52 total| Object Name |
|---|
cienaCesMgmtInterfaceMIBThis module defines the management interface details and the
associated notifications. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.27 |
cienaCesMgmtInterfaceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.1 |
cienaCesMgmtInterface OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.1.1 |
cienaCesInetMgmtInterfaceTableTable of management interfaces. SEQUENCE OF CienaCesInetMgmtInterfaceEntry .1.3.6.1.4.1.1271.2.1.27.1.1.1 |
cienaCesInetMgmtInterfaceEntryThese interfaces are used to cause the switch CPU to
become involved with the IP traffic. By default, a
minimum of two interfaces , one for
the local management interface and one for the remote
management interface. CienaCesInetMgmtInterfaceEntry .1.3.6.1.4.1.1271.2.1.27.1.1.1.1 |
cienaCesInetMgmtInterfaceIndexSpecifies the management interface index. Integer32 .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.1 |
cienaCesInetMgmtInterfaceAddrTypeThis OID specifies the Inet address type of the OIDs cienaCesInetMgmtInterfaceAddr and
cienaCesInetMgmtInterfacePrefixLength.
When representing:
ipv4 : cienaCesInetMgmtInterfaceAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesInetMgmtInterfaceAddr should be compliant with InetAddressIPv6 from RFC 4001 InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.2 |
cienaCesInetMgmtInterfaceAddrInet address associated with this interface.
This OID should be used in conjuction with cienaCesInetMgmtInterfaceAddrType.
This value should be compliant with RFC 4001 InetAddressType. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.3 |
cienaCesInetMgmtInterfaceAddrPrefixLengthSpecifies the address prefix length. This OID should be used in conjuction
with cienaCesInetMgmtInterfaceAddrType.
This OID should be compliant with RFC 4001 InetAddressPrefixLength.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.4 |
cienaCesInetMgmtInterfaceNameThe management interface name for this interface.ro DisplayString .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.5 |
cienaCesInetMgmtInterfaceAdminStateThe admin state of this management interface. A value of enabled(1)
indicates that this interface is enabled and a value of
disabled(2) indicates that this interface is disabled.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.6 |
cienaCesInetMgmtInterfaceOperStateThe oper state of this management interface. A value of enabled(1)
indicates that this interface is enabled and a value of
disabled(2) indicates that this interface is disabled.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.7 |
cienaCesInetMgmtInterfaceDomainSpecifies the management interface domain.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.8 |
cienaCesInetMgmtInterfaceDomainIdSpecifies the management interface domain index.
When cienaCesInetMgmtInterfaceDomain represents 'vs', this object represents the vs index.
When cienaCesInetMgmtInterfaceDomain represents 'vlan , this object represents the vlan id.ro Integer32 .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.9 |
cienaCesInetMgmtInterfacePktPriorityThe 802.1p priority value for the management traffic on this interface.ro Integer32 .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.10 |
cienaCesInetMgmtInterfaceMtuSpecifies the interface path MTU.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.11 |
cienaCesInetMgmtInterfaceNotifIndexSpecifies the management interface index.ro Integer32 .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.12 |
cienaCesInetMgmtInterfaceNotifAddrTypeThis OID specifies the Inet address type of the OIDs cienaCesInetMgmtInterfaceNotifAddr and
cienaCesInetMgmtInterfacePrefixLength.
When representing:
ipv4 : cienaCesInetMgmtInterfaceNotifAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesInetMgmtInterfaceNotifAddr should be compliant with InetAddressIPv6 from RFC 4001ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.13 |
cienaCesInetMgmtInterfaceNotifAddrInet address associated with this interface.
This OID should be used in conjuction with cienaCesInetMgmtInterfaceNotifAddrType.
This value should be compliant with RFC 4001 InetAddressType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.14 |
cienaCesInetMgmtInterfaceDomainVsNameThe virtual switch name associated with the cienaCesInetMgmtInterfaceDomainId when
the cienaCesInetMgmtInterfaceDomain is vs.ro DisplayString .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.15 |
cienaCesInetMgmtInterfaceIngressAclProfIdThe ID of the ingress ACL profile attached to the management interface.
A non-zero value refers to the ACL profile as defined by the cienaCesAclProfileId object
in the cienaCesAccessListMIB module.
A value of 0 means no ingress ACL profile is attached to this interface.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.27.1.1.1.1.16 |
cienaCesInetGatewayTableTable of gateway Inet addresses. SEQUENCE OF CienaCesInetGatewayEntry .1.3.6.1.4.1.1271.2.1.27.1.1.2 |
cienaCesInetGatewayEntryGateway addresses represented here are used by the
management interfaces. CienaCesInetGatewayEntry .1.3.6.1.4.1.1271.2.1.27.1.1.2.1 |
cienaCesInetGatewayAddrTypeThis OID specifies the Inet Address Type of the OID cienaCesInetGatewayAddr
When representing :
ipv4 : cienaCesInetGatewayAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesInetGatewayAddr should be compliant with InetAddressIPv6 from RFC 4001
ipv6z : cienaCesInetGatewayAddr should be compliant with InetAddressIPv6z from RFC 4001 InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.2.1.2 |
cienaCesInetGatewayAddrInet address associated with this interface.
This OID should be used in conjuction with cienaCesInetGatewayAddrType.
The InetAddress set here should be compliant with RFC 4001 InetAddressType. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.2.1.3 |
cienaCesInetGatewaySourceSpecifies how this gateway was configured.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.2.1.4 |
cienaCesInetGatewayOperStateSpecifies the gateway's operational status.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.2.1.5 |
cienaCesInetGatewayNotifAddrTypeThis OID specifies the Inet Address Type of the OID cienaCesInetGatewayNotifAddr
When representing :
ipv4 : cienaCesInetGatewayNotifAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesInetGatewayNotifAddr should be compliant with InetAddressIPv6 from RFC 4001
ipv6z : cienaCesInetGatewayNotifAddr should be compliant with InetAddressIPv6z from RFC 4001ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.2.1.6 |
cienaCesInetGatewayNotifAddrInet address associated with this interface.
This OID should be used in conjuction with cienaCesInetGatewayNotifAddrType.
The InetAddress set here should be compliant with RFC 4001 InetAddressType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.2.1.7 |
cienaCesInetStackTableTable of Inet stack states. SEQUENCE OF CienaCesInetStackEntry .1.3.6.1.4.1.1271.2.1.27.1.1.3 |
cienaCesInetStackEntryInet address type stack operational states. CienaCesInetStackEntry .1.3.6.1.4.1.1271.2.1.27.1.1.3.1 |
cienaCesInetAddrTypeThis object indicates the interface address type. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.27.1.1.3.1.1 |
cienaCesInetForwardingStateThis object indicates the forwarding state associated with this address type
represented by cienaCesInetAddrType.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.3.1.2 |
cienaCesInetDefaultDscpThis object indicates the default DSCP associated with this address type
represented by cienaCesInetAddrType.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.27.1.1.3.1.3 |
cienaCesInetIcmpAcceptRedirectsThis object indicates the ICMP accept-redirects setting associated with this address
type represented by cienaCesInetAddrType. When on, the corresponding IP stack will
act upon received ICMP redirect messages. When off, the corresponding IP stack
will not act upon received ICMP redirect messages.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.3.1.4 |
cienaCesInetIcmpEchoIgnoreBroadcastsThis object indicates the ICMP echo-ignore-broadcasts setting associated with this address
type represented by cienaCesInetAddrType. This setting refers to whether the device will
ignore ICMP Echo Request messages which are directed toward a multicast or broadcast
destination address.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.3.1.5 |
cienaCesInetIcmpPortUnreachableThis object indicates the ICMP port-unreachable setting associated with this address
type represented by cienaCesInetAddrType. When on, the corresponding IP stack will
send ICMP port-unreachable messages when appropriate to do so. When off, the
corresponding IP stack will not send ICMP port-unreachable messages.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.3.1.6 |
cienaCesInetTcpStack OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.1.1.4 |
cienaCesInetTcpTimestampsThis object indicates the current setting of the TCP timestamps option used by
the TCP stack of the device.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.4.1 |
cienaCesInetMgmtPort OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.1.1.5 |
cienaCesInetMgmtPortInterfaceThis object indicates the way in which traffic at the MGMT port is used.ro Enumeration .1.3.6.1.4.1.1271.2.1.27.1.1.5.1 |
cienaCesMgmtInterfaceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.3 |
cienaCesMgmtInterfaceMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.3.1 |
cienaCesMgmtInterfaceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.27.3.2 |
cienaCesMgmtInterfaceMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.27 |
cienaCesMgmtInterfaceMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.27.0 |
cienaCesInetMgmtAddrChangeNotificationA cienaCesInetMgmtAddrChangeNotification is sent when the
inet address of the associated interface changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.27.0.1 |
cienaCesInetMgmtAddrAddedNotificationA cienaCesInetMgmtAddrChangeNotification is sent when a new interface
is added. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.27.0.2 |
cienaCesInetMgmtAddrRemovedNotificationA cienaCesInetMgmtAddrChangeNotification is sent when an interface
is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.27.0.3 |
cienaCesInetGatewayAddrChangeNotificationA cienaCesInetGatewayAddrChangeNotification is sent
when the address associated with the gateway is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.27.0.4 |
cienaCesInetGatewayAddedNotificationA cienaCesInetGatewayAddrAddNotification is sent
when a new gateway is added. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.27.0.5 |
cienaCesInetGatewayRemovedNotificationA cienaCesInetGatewayRemovedNotification is sent
when a gateway is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.27.0.6 |
CIENA-CES-MGMT-INTERFACE-MIB Technical Reference Overview
The CIENA-CES-MGMT-INTERFACE-MIB SNMP MIB module published by Ciena defines 52 managed OID objects, including 30 scalar/column metrics, 3 SNMP tables, and 6 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.27. Key tabular structures include cienaCesInetMgmtInterfaceTable, cienaCesInetGatewayTable, cienaCesInetStackTable. Monitored SNMP traps/notifications include cienaCesInetMgmtAddrChangeNotification, cienaCesInetMgmtAddrAddedNotification, cienaCesInetMgmtAddrRemovedNotification, cienaCesInetGatewayAddrChangeNotification, cienaCesInetGatewayAddedNotification, cienaCesInetGatewayRemovedNotification.
Key OID Definitions in CIENA-CES-MGMT-INTERFACE-MIB
.1.3.6.1.4.1.1271.2.1.27.1.1.1Table of management interfaces.
.1.3.6.1.4.1.1271.2.1.27.1.1.2Table of gateway Inet addresses.
.1.3.6.1.4.1.1271.2.1.27.1.1.3Table of Inet stack states.
.1.3.6.1.4.1.1271.2.2.27.0.1A cienaCesInetMgmtAddrChangeNotification is sent when the inet address of the associated interface changes.
.1.3.6.1.4.1.1271.2.2.27.0.2A cienaCesInetMgmtAddrChangeNotification is sent when a new interface is added.
.1.3.6.1.4.1.1271.2.2.27.0.3A cienaCesInetMgmtAddrChangeNotification is sent when an interface is removed.
.1.3.6.1.4.1.1271.2.2.27.0.4A cienaCesInetGatewayAddrChangeNotification is sent when the address associated with the gateway is changed.
.1.3.6.1.4.1.1271.2.2.27.0.5A cienaCesInetGatewayAddrAddNotification is sent when a new gateway is added.
.1.3.6.1.4.1.1271.2.2.27.0.6A cienaCesInetGatewayRemovedNotification is sent when a gateway is removed.
.1.3.6.1.4.1.1271.2.1.27.1.1.4.1This object indicates the current setting of the TCP timestamps option used by the TCP stack of the device.
.1.3.6.1.4.1.1271.2.1.27.1.1.5.1This object indicates the way in which traffic at the MGMT port is used.
.1.3.6.1.4.1.1271.2.1.27.1.1.1.1These interfaces are used to cause the switch CPU to become involved with the IP traffic. By default, a minimum of two interfaces , one for the local management interface and one for the remote management interface.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.