CIENA-CES-IP-INTERFACE-MIB
The CIENA-CES-IP-INTERFACE-MIB monitors IP interface status and configuration parameters on Ciena Carrier Ethernet Service (CES) platforms, specifically generating notifications for interface state transitions, link up/down events, and IP address changes. This module enables automated fault detection and policy enforcement for Layer 3 connectivity within Ciena's carrier-grade Ethernet service infrastructure.
Imported Objects
Objects
59 total| Object Name |
|---|
cienaCesIpInterfaceMIBThis module defines the IP interface related notifications. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.8 |
cienaCesIpInterfaceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.8.1 |
cienaCesIpInterface OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.8.1.1 |
cienaCesIpMgmtInterfaceTableTable of management IP addresses and their associated attributes. SEQUENCE OF CienaCesIpMgmtInterfaceEntry .1.3.6.1.4.1.1271.2.1.8.1.1.1 |
cienaCesIpMgmtInterfaceEntryEach entry represents a management interface configuration parameter. CienaCesIpMgmtInterfaceEntry .1.3.6.1.4.1.1271.2.1.8.1.1.1.1 |
cienaCesIpMgmtInterfaceIndexUnique identifier of this interface. Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.1 |
cienaCesIpMgmtInterfaceNameThe friendly and unique name for the IP interface.ro DisplayString .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.2 |
cienaCesIpMgmtInterfaceOperIpAddrThe operational IP address associated with this interface.ro IpAddress .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.3 |
cienaCesIpMgmtInterfaceOperSubnetThe operational subnet mask associated with this IP address/interface.ro IpAddress .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.4 |
cienaCesIpMgmtInterfaceAdminStateThe admin status of each interface. A value of:
- enabled(1) indicates that this interface is administratively enabled
- disabled(2) indicates that this interface is administratively disabled
- shutdown(3) indicates a shutdown state of DCN interfacero Enumeration .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.5 |
cienaCesIpMgmtInterfaceOperStateThe operational status of each interface. A value of:
- enabled(1) indicates that this interface is operationally enabled
- disabled(2) indicates that this interface is operationally disabledro Enumeration .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.6 |
cienaCesIpMgmtInterfaceTypeThe type of management IP interface.ro Enumeration .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.7 |
cienaCesIpMgmtInterfaceVirtualSwitchIndexThe virtual switch index associated with this interface (zero if none).ro Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.8 |
cienaCesIpMgmtInterfaceParentInterfaceIndexThe parent interface index associated with this interface (zero if none).ro Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.1.1.9 |
cienaCesIpGatewayAddrThe gateway address.ro IpAddress .1.3.6.1.4.1.1271.2.1.8.1.1.2 |
cienaCesIpDataInterfaceTableData Interface entry. SEQUENCE OF CienaCesIpDataInterfaceEntry .1.3.6.1.4.1.1271.2.1.8.1.1.3 |
cienaCesIpDataInterfaceEntryEach entry represents a data interface configuration parameter. CienaCesIpDataInterfaceEntry .1.3.6.1.4.1.1271.2.1.8.1.1.3.1 |
cienaCesIpDataInterfaceIndexUnique index into the table. Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.1 |
cienaCesIpDataInterfaceNameThe name for this Data IP interface.ro DisplayString .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.2 |
cienaCesIpDataInterfaceIpAddrIP address associated with this interface.
Deprecated in lieu of cienaCesIpDataInterfaceInetAddr.rodeprecated IpAddress .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.3 |
cienaCesIpDataInterfaceMaskThe subnet mask associated with this ip address/interface.
Deprecated in lieu of cienaCesIpDataInterfaceInetAddrPrefixLength.rodeprecated IpAddress .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.4 |
cienaCesIpDataInterfaceVsIndexThe vIndex associated with this Data IP interface.ro Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.5 |
cienaCesIpDataInterfaceTypeThe type of Data IP interface.ro Enumeration .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.6 |
cienaCesIpDataInterfaceIfIndexThe unique interface index assigned by INET.ro Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.7 |
cienaCesIpDataInterfaceMacMAC address assigned by the device to this Data interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.8 |
cienaCesIpDataInterfaceIfMtuThe size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can be sent on the interface.ro Integer32 .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.9 |
cienaCesIpDataInterfaceAdminStateThe Admin State of Data IP interface.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.10 |
cienaCesIpDataInterfaceOperStateThe Oper State of Data IP interface.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.11 |
cienaCesIpDataInterfaceIpForwardingThe Ip Forwarding State of Data IP interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.12 |
cienaCesIpDataInterfaceLdpEnableDetermines if LDP is enabled on the Data IP interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.13 |
cienaCesIpDataInterfaceRsvpEnableDetermines if RSVP is enabled on the Data IP interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.14 |
cienaCesIpDataInterfaceTunnelDependencyDetermines if Tunnel entities using the interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.15 |
cienaCesIpDataInterfaceL2VpnDependencyThe L2Vpn association of the interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.16 |
cienaCesIpDataInterfaceOspfEnableThe OSPF attachment to the Data interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.17 |
cienaCesIpDataInterfaceIsisEnableThe ISIS attachment to the Data interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.18 |
cienaCesIpDataInterfaceStaticArpEnableThe Static ARP attachment to the Data interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.19 |
cienaCesIpDataInterfaceVccvDependencyThe VCCV Profile association to the Data interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.20 |
cienaCesIpDataInterfacePtpEnableThe PTP attachment to the Data interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.21 |
cienaCesIpDataInterfaceIfNumThis represent interface number.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.22 |
cienaCesIpDataInterfaceStaticArpDestinationIpThe static ARP attachment destination IP address to the data interface.
IpAddress value returned is only valid if cienaCesIpDataInterfaceStaticArpEnable
is true.ro IpAddress .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.23 |
cienaCesIpDataInterfaceStaticArpDestinationMacThe static ARP attachment destination MAC address to the data interface.
MacAddress value returned is only valid if cienaCesIpDataInterfaceStaticArpEnable
is true.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.24 |
cienaCesIpDataInterfaceRoleThe Role State of the IP Interface. The default role is control-plane, which is the regular
MPLS L3 interface. When role is specified as connectivity, it is used for EVC Ping feature.
When role is specified as benchmark it is used for RFC 2544 Benchmark feature.ro Enumeration .1.3.6.1.4.1.1271.2.1.8.1.1.3.1.25 |
cienaCesIpInterfaceL3InterfaceBaseMacThe base MAC address for L3 interfaces.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.8.1.1.4 |
cienaCesIpDataInterfaceInetTableTable of ip-interface IP addresses and their associated attributes. SEQUENCE OF CienaCesIpDataInterfaceInetEntry .1.3.6.1.4.1.1271.2.1.8.1.1.5 |
cienaCesIpDataInterfaceInetEntryEach entry represents an ip-interface configuration parameter. CienaCesIpDataInterfaceInetEntry .1.3.6.1.4.1.1271.2.1.8.1.1.5.1 |
cienaCesIpDataInterfaceInetIndexAddrTypeThis OID specifies the Inet address type of the OIDs cienaCesIpDataInterfaceInetIndexAddr.
When representing:
ipv4 : cienaCesIpDataInterfaceInetAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesIpDataInterfaceInetAddr should be compliant with InetAddressIPv6 from RFC 4001 InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.8.1.1.5.1.1 |
cienaCesIpDataInterfaceInetIndexAddrInet address associated with this interface.
This OID should be used in conjuction with cienaCesIpDataInterfaceInetIndexAddrType.
This value should be compliant with RFC 4001 InetAddressType. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.8.1.1.5.1.2 |
cienaCesIpDataInterfaceInetAddrPrefixLengthSpecifies the address prefix length. This OID should be used in conjuction
with cienaCesIpDataInterfaceInetAddrType.
This OID should be compliant with RFC 4001 InetAddressPrefixLength.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.8.1.1.5.1.3 |
cienaCesIpDataInterfaceInetAddrTypeThis OID specifies the Inet address type of the OIDs cienaCesIpDataInterfaceInetAddr and
cienaCesIpDataInterfaceInetAddrPrefixLength.
When representing:
ipv4 : cienaCesIpDataInterfaceInetNotifAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesIpDataInterfaceInetNotifAddr should be compliant with InetAddressIPv6 from RFC 4001ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4 |
cienaCesIpDataInterfaceInetAddrInet address associated with this interface.
This OID should be used in conjuction with cienaCesIpDataInterfaceInetAddrType.
This value should be compliant with RFC 4001 InetAddressType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.8.1.1.5.1.5 |
cienaCesIpInterfaceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.8.3 |
cienaCesIpInterfaceMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.8.3.1 |
cienaCesIpInterfaceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.8.3.2 |
cienaCesIpInterfaceMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.8 |
cienaCesIpInterfaceMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.8.0 |
cienaCesIpMgmtInterfaceAddrChgNotificationA cienaCesIpMgmtInterfaceAddrChgNotification is sent when the
IP address of an interface changes. To enable the device to send
this notification, cienaCesIPMgmtInterfaceAddrChangeTrapState
needs to be set to enabled. The cienaCesIPMgmtInterfaceAddrChangeTrapState
is set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesIpMgmtInterfaceName,
cienaCesIpMgmtInterfaceOperIpAddr, and cienaCesIpMgmtInterfaceOperSubnet. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.8.0.1 |
cienaCesIpMgmtInterfaceGatewayChgNotificationA cienaCesIpMgmtInterfaceGatewayChgNotification is sent when the
IP address of an interface gateway changes. To enable the device to send
this notification, cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState needs
to be set to enabled. The cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState
is set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, and cienaCesIpGatewayAddr. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.8.0.2 |
cienaCesIpInterfaceUpNotificationA cienaCesIpInterfaceUpNotification trap signifies that the SNMP entity, acting in
an agent role, has detected the interface's status has become operationally up.
This object is set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesIpDataInterfaceName, cienaCesIpDataInterfaceIfIndex,
cienaCesIpDataInterfaceAdminState, cienaCesIpDataInterfaceOperState. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.8.0.3 |
cienaCesIpInterfaceDownNotificationA cienaCesIpInterfaceDownNotification trap signifies that the SNMP entity, acting in
an agent role, has detected the interface's status has become operationally up.
This object is set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesIpDataInterfaceName, cienaCesIpDataInterfaceIfIndex,
cienaCesIpDataInterfaceAdminState, cienaCesIpDataInterfaceOperState. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.8.0.4 |
CIENA-CES-IP-INTERFACE-MIB Technical Reference Overview
The CIENA-CES-IP-INTERFACE-MIB SNMP MIB module published by Ciena defines 59 managed OID objects, including 41 scalar/column metrics, 3 SNMP tables, and 4 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.8. Key tabular structures include cienaCesIpMgmtInterfaceTable, cienaCesIpDataInterfaceTable, cienaCesIpDataInterfaceInetTable. Monitored SNMP traps/notifications include cienaCesIpMgmtInterfaceAddrChgNotification, cienaCesIpMgmtInterfaceGatewayChgNotification, cienaCesIpInterfaceUpNotification, cienaCesIpInterfaceDownNotification.
Key OID Definitions in CIENA-CES-IP-INTERFACE-MIB
.1.3.6.1.4.1.1271.2.1.8.1.1.1Table of management IP addresses and their associated attributes.
.1.3.6.1.4.1.1271.2.1.8.1.1.3Data Interface entry.
.1.3.6.1.4.1.1271.2.1.8.1.1.5Table of ip-interface IP addresses and their associated attributes.
.1.3.6.1.4.1.1271.2.2.8.0.1A cienaCesIpMgmtInterfaceAddrChgNotification is sent when the IP address of an interface changes. To enable the device to send this notification, cienaCesIPMgmtInterfaceAddrChangeTrapState needs to be set to enabled. The cienaCesIPMgmtInterfaceAddrChangeTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesIpMgmtInterfaceName, cienaCesIpMgmtInterfaceOperIpAddr, and cienaCesIpMgmtInterfaceOperSubnet.
.1.3.6.1.4.1.1271.2.2.8.0.2A cienaCesIpMgmtInterfaceGatewayChgNotification is sent when the IP address of an interface gateway changes. To enable the device to send this notification, cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState needs to be set to enabled. The cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesIpGatewayAddr.
.1.3.6.1.4.1.1271.2.2.8.0.3A cienaCesIpInterfaceUpNotification trap signifies that the SNMP entity, acting in an agent role, has detected the interface's status has become operationally up. This object is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesIpDataInterfaceName, cienaCesIpDataInterfaceIfIndex, cienaCesIpDataInterfaceAdminState, cienaCesIpDataInterfaceOperState.
.1.3.6.1.4.1.1271.2.2.8.0.4A cienaCesIpInterfaceDownNotification trap signifies that the SNMP entity, acting in an agent role, has detected the interface's status has become operationally up. This object is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesIpDataInterfaceName, cienaCesIpDataInterfaceIfIndex, cienaCesIpDataInterfaceAdminState, cienaCesIpDataInterfaceOperState.
.1.3.6.1.4.1.1271.2.1.8.1.1.2The gateway address.
.1.3.6.1.4.1.1271.2.1.8.1.1.4The base MAC address for L3 interfaces.
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1Each entry represents a management interface configuration parameter.
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.1Unique identifier of this interface.
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.2The friendly and unique name for the IP interface.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.