CIENA-CES-ICL-MIB
The CIENA-CES-ICL-MIB module monitors the operational state, link status, and performance counters of Inter-chassis Links (ICL) within Ciena Carrier Ethernet Services (CES) platforms to facilitate high-availability clustering and chassis synchronization. It provides visibility into link up/down events, error statistics, and session establishment metrics required for maintaining redundant control plane connectivity between chassis.
Imported Objects
Objects
37 total| Object Name |
|---|
cienaCesIclMIBThis MIB defines the managed objects for Inter-chassis Links MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.32 |
cienaCesIclMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.1 |
cienaCesIcl OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.1.1 |
cienaCesIclTableThe (conceptual) table listing all the
Inter-chassis Links (ICLs). SEQUENCE OF CienaCesIclEntry .1.3.6.1.4.1.1271.2.1.32.1.1.1 |
cienaCesIclEntryAn entry (conceptual row) in the cienaCesIclTable. CienaCesIclEntry .1.3.6.1.4.1.1271.2.1.32.1.1.1.1 |
cienaCesIclIndexICL Index for this entryro Unsigned32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.1 |
cienaCesIclNameThis object specifies the name of the Inter-chassis link (ICL).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.2 |
cienaCesIclRemoteMacAddressThis object specifies the Inter-chassis link remote MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.3 |
cienaCesIclTypeThis object specifies the Inter-chassis link type.ro Enumeration .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.4 |
cienaCesIclVlanThis object specifies the ICL VLAN. This is valid only if cienaCesIclType is vlan(1).ro Unsigned32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.5 |
cienaCesIclVsNameThis object specifies the ICL VS. This is valid only if cienaCesIclType is vs(2).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.6 |
cienaCesIclCfmServicePrimaryThis object specifies primary CFM service on the ICL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.7 |
cienaCesIclCfmServiceSecondaryThis object specifies the name of the Inter-chassis link (ICL).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.8 |
cienaCesIclOperStateThis object specifies the ICL operational state.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.9 |
cienaCesIclStatusThis object specifies the status of the ICL.ro Enumeration .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.10 |
cienaCesIclAdminStateThis object specifies the admin state of the ICL.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.11 |
cienaCesIclCfmFaultThis object specifies if CFM fault is set on the ICL.ro Enumeration .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.12 |
cienaCesIclVplsFaultThis object specifies if VPLS fault is set on the ICL.ro Enumeration .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.13 |
cienaCesIclRxTimeoutThis object specifies if Rx timeout fault is set on the ICLro Enumeration .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.14 |
cienaCesIclIntervalMismatchThis object specifies if interval mismatch fault is set on the ICLro Enumeration .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.15 |
cienaCesIclHeartbeatIntervalThis object specifies the ICL heartbeat interval. The range is 1 to 30s and the default is 1s.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.16 |
cienaCesIclUpTimeThis object specifies total time for which the ICL has been operationally down.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.17 |
cienaCesIclTotalDownTimeThis object specifies total time for which the ICL has been operationally down.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.18 |
cienaCesIclRxFramesThis object specifies the number of CICP frames received by the ICL.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.19 |
cienaCesIclTxFramesThis object specifies the number of CICP frames transmitted by the ICL.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.20 |
cienaCesIclRxUnknownFramesThis object specifies the number of unknown frames received by the ICL.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.21 |
cienaCesIclRxHtbtFramesThis object specifies the number of Hearbeat frames received by the ICL.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.22 |
cienaCesIclTxHtbtFramesThis object specifies the number of Hearbeat frames transmitted by the ICL.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.23 |
cienaCesIclTxFailedFramesThis object specifies the number of failed to transmit frames.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.24 |
cienaCesIclNumberFailuresThis object specifies the number of ICL failures.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.25 |
cienaCesIclRxConfigMismatchThis object specifies the number of ICL config mismatch frames received.ro Counter32 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.26 |
cienaCesIclMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.2 |
cienaCesIclMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.2.0 |
cienaCesIclStateChangeThis notification is sent when ICL oper state changes.
Var binding cienaCesIclIndex represents the ICL index. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.1.32.2.0.1 |
cienaCesIclMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.3 |
cienaCesIclMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.3.1 |
cienaCesIclMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.32.3.2 |
CIENA-CES-ICL-MIB Technical Reference Overview
The CIENA-CES-ICL-MIB SNMP MIB module published by Ciena defines 37 managed OID objects, including 26 scalar/column metrics, 1 SNMP tables, and 1 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.32. Key tabular structures include cienaCesIclTable. Monitored SNMP traps/notifications include cienaCesIclStateChange.
Key OID Definitions in CIENA-CES-ICL-MIB
.1.3.6.1.4.1.1271.2.1.32.1.1.1The (conceptual) table listing all the Inter-chassis Links (ICLs).
.1.3.6.1.4.1.1271.2.1.32.2.0.1This notification is sent when ICL oper state changes. Var binding cienaCesIclIndex represents the ICL index.
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1An entry (conceptual row) in the cienaCesIclTable.
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.1ICL Index for this entry
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.2This object specifies the name of the Inter-chassis link (ICL).
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.3This object specifies the Inter-chassis link remote MAC address.
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.4This object specifies the Inter-chassis link type.
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.5This object specifies the ICL VLAN. This is valid only if cienaCesIclType is vlan(1).
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.6This object specifies the ICL VS. This is valid only if cienaCesIclType is vs(2).
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.7This object specifies primary CFM service on the ICL.
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.8This object specifies the name of the Inter-chassis link (ICL).
.1.3.6.1.4.1.1271.2.1.32.1.1.1.1.9This object specifies the ICL operational state.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.