CIENA-CES-EXT-LAG-MIB
The CIENA-CES-EXT-LAG-MIB enables management of Carrier Ethernet Service (CES) Link Aggregation Groups (LAGs) on Ciena platforms by extending IEEE 802.3 LAG definitions to support specific creation and deletion operations for CES traffic interfaces. This module provides the necessary management objects to configure and monitor LAG membership and state for CES services, ensuring proper bundling of physical links for high-availability transport.
Imported Objects
Objects
59 total| Object Name |
|---|
cienaCesExtLagMIBThis MIB module is an extension to the ieee8023-lag-mib.
This MIB defines the mgmt objects for the creation and
deletion of LAGs. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.3 |
cienaCesExtLagMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.3.1 |
cienaCesExtLag OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.3.1.1 |
cienaCesMaxLagsThe maximum number of LAGs that this device supports.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.1 |
cienaCesNumLagsThe current number of LAGs that are configured on this device.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.2 |
cienaCesExtLagTableThe (conceptual) table listing all the LAGs. SEQUENCE OF CienaCesExtLagEntry .1.3.6.1.4.1.1271.2.1.3.1.1.3 |
cienaCesExtLagEntryAn entry (conceptual row) in the cienaCesExtLagTable. CienaCesExtLagEntry .1.3.6.1.4.1.1271.2.1.3.1.1.3.1 |
cienaCesExtAggIdObject that specifies a unique entry in the
cienaCesExtLagTable. A management station wishing
to create a LAG should use a pseudo-random value
for this object when creating an instance of a
cienaCesExtLagEntry.ro Integer32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.1 |
cienaCesExtAggNameThe name assigned to this LAG by the management
station. This object can only be set while creating the LAG. The LAG
cannot be renamed once it is created.ro DisplayString .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.2 |
cienaCesExtAggIndexThe unique identifier allocated to this LAG by
the local system. This attribute identifies an
LAG instance among the subordinate managed
objects of the containing object.
This value is read-only. This object refers to the
dot3adAggIndex in the ieee-8023-lag-mib.ro Integer32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.3 |
cienaCesExtAggModeThis object specifies the mode in which the given aggregation is operating.ro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.4 |
cienaCesExtLagProtectionRevertStateThis object specifies that if the primary port goes from operationally disabled to operationally enabled it
shall become active, and one of the secondary ports shall become backup if this MIB object is set to 'on' and the
cienaCesLagProtectionRevertTimer timer expires.ro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.5 |
cienaCesExtLagProtectionRevertTimerThis object specifies the revert protection timer value.ro INTEGER .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.6 |
cienaCesExtAggTotalAddedPortsThis object specifies the total number of member ports present in the LAG group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.7 |
cienaCesExtAggTotalProtectionPortsThis object specifies the total number of protection member ports present in the LAG group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.8 |
cienaCesExtLagProtectionModeThis object specifies the LACP protection-mode in which the given aggregation is operating.ro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.9 |
cienaCesExtAggICLThis object specifies the inter-chassis link name that the multi-chassis LAG is using.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.10 |
cienaCesExtAggRoleThis object specifies if the MC-LAG node is primary or backupro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.11 |
cienaCesExtAggRgNodeIdThis object specifies the MC-LAG RG node ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.12 |
cienaCesExtAggRgDynamicPriorityThis object specifies the MC-LAG RG node dynamically assigned priority.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.13 |
cienaCesExtAggRgOperKeyThis object specifies the MC-LAG RG node operational key.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.14 |
cienaCesExtAggRedundancyStateThis object specifies the oper state of the MC-LAG nodero Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.15 |
cienaCesExtAggConnectStateThis object specifies the Connect State of the MC-LAG node.ro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.16 |
cienaCesExtAggRgMismatchStatusThis object specifies the Mismatch Status of the MC-LAG node.ro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.17 |
cienaCesExtAggPeerSystemMacThis object specifies the MC-LAG peer node system MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.18 |
cienaCesExtAggPeerRgNodeIdThis object specifies the MC-LAG peer RG node ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.19 |
cienaCesExtAggPeerRgDynamicPriorityThis object specifies the MC-LAG peer RG node dynamically assigned priority.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.20 |
cienaCesExtAggPeerRgOperKeyThis object specifies the MC-LAG peer RG node operational key.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.21 |
cienaCesExtAggPeerRgNumAddedPortsThis object specifies number of ports added to the MC-LAG peer RG node.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.22 |
cienaCesExtAggPeerRgNumAvailablePortsThis object specifies number of ports available to the MC-LAG peer RG node.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.23 |
cienaCesExtAggDisconnectRxThis object specifies the number of Disconnect messages received by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.24 |
cienaCesExtAggDisconnectTxThis object specifies the number of Disconnect messages transmitted by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.25 |
cienaCesExtAggConfigMismatchRxThis object specifies the number of mismatch config messages received by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.26 |
cienaCesExtAggKeyMismatchCountThis object specifies the number of messages received with mismatching key by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.27 |
cienaCesExtAggOutOfSequenceRxThis object specifies the number of out of sequence messages received by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.28 |
cienaCesExtAggPeerUnreachableCountThis object specifies the number of times peer was unreachable.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.29 |
cienaCesExtAggUnknownRxThis object specifies the number unknown messages received by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.30 |
cienaCesExtAggTotalRxThis object specifies the total number of messages received by the MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.31 |
cienaCesExtAggTotalTxThis object specifies the total number of messages transmitted by MC-LAG node.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.32 |
cienaCesExtAggTotalDownTimeThis object specifies total time for which the MC-LAG node has been operationally down.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.33 |
cienaCesExtAggUpTimeThis object specifies time for which the MC-LAG node has been operationally up.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.34 |
cienaCesExtAggTimeInProtectStateThis object specifies time for which the MC-LAG node has been in protection state.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.35 |
cienaCesExtAggLastTimeProtectedThis object specifies time of day of the last MC-LAG protection switching.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.36 |
cienaCesExtAggNumberOfSwitchoversThis object specifies the number of MC-LAG protection switching.ro Counter32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.37 |
cienaCesExtAggMultiChassisThis object specifies if the LAG is an MC-LAGro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.38 |
cienaCesExtAggMinimumLinkAggregationThis object enables minimum link aggregation mode for the LAG groupro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.39 |
cienaCesExtAggMinimumLinkThresholdThis object specifies minimum link threshold value for minimum link aggregation mode.ro Integer32 .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.40 |
cienaCesExtAggAdminStateThis object displays current value of Admin state of the LAG groupro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.41 |
cienaCesExtAggOperStateThis object displays current value of Oper State of the LAG groupro Enumeration .1.3.6.1.4.1.1271.2.1.3.1.1.3.1.42 |
cienaCesLagProtectionTableThe (conceptual) table listing the protection ports for each aggregation. SEQUENCE OF CienaCesLagProtectionEntry .1.3.6.1.4.1.1271.2.1.3.1.1.4 |
cienaCesLagProtectionEntryAn entry (conceptual row) in the cienaCesLagProtectionTable. CienaCesLagProtectionEntry .1.3.6.1.4.1.1271.2.1.3.1.1.4.1 |
cienaCesLagProtectionPortThis object specifies the protection port number. It is also used as an index in the table.ro INTEGER .1.3.6.1.4.1.1271.2.1.3.1.1.4.1.1 |
cienaCesExtAggMarkerTimeoutThis object specifies time for which Marker PDUs are sent periodically.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.3.1.1.5 |
cienaCesExtLagMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.3.2 |
cienaCesExtLagMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.3.2.1 |
cienaCesExtLagMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.3.2.2 |
cienaCesExtLagMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.21 |
cienaCesExtLagMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.21.0 |
cienaCesExtLagMclagStateChangeThis notification is sent when MC-LAG oper state changes.
Var binding cienaCesExtAggId represents the MC-LAG PGID. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.21.0.1 |
CIENA-CES-EXT-LAG-MIB Technical Reference Overview
The CIENA-CES-EXT-LAG-MIB SNMP MIB module published by Ciena defines 59 managed OID objects, including 46 scalar/column metrics, 2 SNMP tables, and 1 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.3. Key tabular structures include cienaCesExtLagTable, cienaCesLagProtectionTable. Monitored SNMP traps/notifications include cienaCesExtLagMclagStateChange.
Key OID Definitions in CIENA-CES-EXT-LAG-MIB
.1.3.6.1.4.1.1271.2.1.3.1.1.3The (conceptual) table listing all the LAGs.
.1.3.6.1.4.1.1271.2.1.3.1.1.4The (conceptual) table listing the protection ports for each aggregation.
.1.3.6.1.4.1.1271.2.2.21.0.1This notification is sent when MC-LAG oper state changes. Var binding cienaCesExtAggId represents the MC-LAG PGID.
.1.3.6.1.4.1.1271.2.1.3.1.1.1The maximum number of LAGs that this device supports.
.1.3.6.1.4.1.1271.2.1.3.1.1.2The current number of LAGs that are configured on this device.
.1.3.6.1.4.1.1271.2.1.3.1.1.5This object specifies time for which Marker PDUs are sent periodically.
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1An entry (conceptual row) in the cienaCesExtLagTable.
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.1Object that specifies a unique entry in the cienaCesExtLagTable. A management station wishing to create a LAG should use a pseudo-random value for this object when creating an instance of a cienaCesExtLagEntry.
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.2The name assigned to this LAG by the management station. This object can only be set while creating the LAG. The LAG cannot be renamed once it is created.
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.3The unique identifier allocated to this LAG by the local system. This attribute identifies an LAG instance among the subordinate managed objects of the containing object. This value is read-only. This object refers to the dot3adAggIndex in the ieee-8023-lag-mib.
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.4This object specifies the mode in which the given aggregation is operating.
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.5This object specifies that if the primary port goes from operationally disabled to operationally enabled it shall become active, and one of the secondary ports shall become backup if this MIB object is set to 'on' and the cienaCesLagProtectionRevertTimer timer expires.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.