CIENA-CES-DHCP-RELAY-MIB
The CIENA-CES-DHCP-RELAY-MIB provides management objects for configuring and monitoring DHCP relay agent parameters, including interface bindings, relay agent information options, and packet forwarding statistics on Ciena Carrier Ethernet Service (CES) platforms.
Imported Objects
Objects
45 total| Object Name |
|---|
cienaCesDhcpRelayMIBThe MIB module contains MIB objects to manage DHCP Relay. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.3.6 |
cienaCesDhcpRelayAgent OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.6.1 |
cienaCesDhcpRelayAgentGlobalAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.6.1.1 |
cienaCesDhcpRelayAgentCircuitIdThis object specifies the type of circuit ID to be used by the DHCP relay agent. It can be set to li, port, cidString or liVs.ro Enumeration .1.3.6.1.4.1.1271.2.3.6.1.1.1 |
cienaCesDhcpRelayAgentRemoteIdThis object specifies the type of remote agent ID to be used by the DHCP relay agent. It can be set to macAddress, hostName or ridString.rw Enumeration .1.3.6.1.4.1.1271.2.3.6.1.1.2 |
cienaCesDhcpRelayAgentL2StateSpecifies the global administrative state of the DHCP L2 relay agent.rw Enumeration .1.3.6.1.4.1.1271.2.3.6.1.1.3 |
cienaCesDhcpRelayAgentReplaceOption82Specifies whether or not the relay agent should replace an existing option 82.rw Enumeration .1.3.6.1.4.1.1271.2.3.6.1.1.4 |
cienaCesDhcpRelayAgentL2StateTableTables that allow changing the configuration of DHCP relay agent functionality for each cienaCesDhcpRelayAgentVs. SEQUENCE OF CienaCesDhcpRelayAgentL2StateEntry .1.3.6.1.4.1.1271.2.3.6.1.2 |
cienaCesDhcpRelayAgentL2StateEntryEntry in the table to configure DHCP relay agent functionality. CienaCesDhcpRelayAgentL2StateEntry .1.3.6.1.4.1.1271.2.3.6.1.2.1 |
cienaCesDhcpRelayAgentVsIndexThis MIB object specifies the VS on which DHCP relay agent is configured. INTEGER .1.3.6.1.4.1.1271.2.3.6.1.2.1.1 |
cienaCesDhcpRelayAgentRlanThis MIB object specifies the RLAN on which the DHCP relay agent is configured. INTEGER .1.3.6.1.4.1.1271.2.3.6.1.2.1.2 |
cienaCesDhcpRelayAgentL2AdminStateThis object allows the disabling or enabling of DHCP relay agent functionality on the given VS.rw Enumeration .1.3.6.1.4.1.1271.2.3.6.1.2.1.3 |
cienaCesDhcpRelayAgentL2OperStateThis object shows the operational state of the DHCP relay agent on the given VS.ro Enumeration .1.3.6.1.4.1.1271.2.3.6.1.2.1.4 |
cienaCesDhcpRelayAgentL2StatsClearThis MIB object when set to 'true' clears DHCP relay agent statistics for the given VS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.6.1.2.1.5 |
cienaCesDhcpRelayAgentL2RowStatusSet this MIB object to 'Destroy' to terminate DHCP L2 relaying on the VS specified by cienaCesDhcpRelayAgentVs and cienaCesDhcpRelayAgentRlan. Set this MIB object to 'CreateAndGo' to create DHCP L2 relaying on the VS along with cienaCesDhcpRelayAgentVsIndex and cienaCesDhcpRelayAgentRlan.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.6.1.2.1.6 |
cienaCesDhcpRelayAgentTrustTableThis table is used to specify the DHCP relay attributes of logical interfaces to which DHCP relay agents are attached. Entries in this table are created when a DHCP relay agent is created and attached to a VS that already has logical interfaces, or when logical interfaces are added to a VS for which a DHCP relay is already created and attached. SEQUENCE OF CienaCesDhcpRelayAgentTrustEntry .1.3.6.1.4.1.1271.2.3.6.1.5 |
cienaCesDhcpRelayAgentTrustEntryEach entry in this table can be used to specify the LI and VS to be trusted. CienaCesDhcpRelayAgentTrustEntry .1.3.6.1.4.1.1271.2.3.6.1.5.1 |
cienaCesDhcpRelayAgentTrustedLiTypeThis MIB object is used as an index in the table and is used to specify the LI type. DhcpLiType .1.3.6.1.4.1.1271.2.3.6.1.5.1.1 |
cienaCesDhcpRelayAgentTrustedLiIndexThis MIB object is used as an index in the table and is used to specify the LI index. INTEGER .1.3.6.1.4.1.1271.2.3.6.1.5.1.2 |
cienaCesDhcpRelayAgentTrustModeThis MIB object is used to set the port as client trusted, server trusted, dual-role trusted or not trusted.rw Enumeration .1.3.6.1.4.1.1271.2.3.6.1.5.1.3 |
cienaCesDhcpRelayAgentCidStringThis object is used to get and set the CID string for the logical interface.rw DisplayString .1.3.6.1.4.1.1271.2.3.6.1.5.1.4 |
cienaCesDhcpRelayAgentRidStringThis object is used to get and set the RID string for the logical interface.rw DisplayString .1.3.6.1.4.1.1271.2.3.6.1.5.1.5 |
cienaCesDhcpRelayAgentL2StatsTableTable to display L2 statistics for each cienaCesDhcpRelayAgentVs. SEQUENCE OF CienaCesDhcpRelayAgentL2StatsEntry .1.3.6.1.4.1.1271.2.3.6.1.6 |
cienaCesDhcpRelayAgentL2StatsEntryEntry in the table to display L2 statistics. CienaCesDhcpRelayAgentL2StatsEntry .1.3.6.1.4.1.1271.2.3.6.1.6.1 |
cienaCesDhcpRelayAgentL2IpSecHeadersThis MIB object reports the number of packets that include IP Sec headers.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.1 |
cienaCesDhcpRelayAgentL2Option82AddedThis MIB object reports the number of packets that have had option 82 added.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.2 |
cienaCesDhcpRelayAgentL2Option82RemovedThis MIB object reports the number of packets that have had option 82 removed.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.3 |
cienaCesDhcpRelayAgentL2UntrustedClientPortPktsRxThis MIB object reports the number of packets received on untrusted client ports.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.4 |
cienaCesDhcpRelayAgentL2UntrustedServerPortPktsRxThis MIB object reports the number of packets received from untrusted server ports.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.5 |
cienaCesDhcpRelayAgentL2SpoofedDhcpPktsThis MIB object reports the number of spoofed DHCP packets.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.6 |
cienaCesDhcpRelayAgentL2Option82ExceedMTUThis MIB object reports the number of packets with DHCP option 82 that would exceed the MTU. The option 82 is not added and the original DHCP packet is forwarded.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.7 |
cienaCesDhcpRelayAgentL2NoTrustedServerPktDropThis MIB object reports the number of DHCP packets dropped because there are no server trusted ports configured.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.8 |
cienaCesDhcpRelayAgentL2NoTrustedClientPktDropThis MIB object reports the number of DHCP packets dropped because there are no client trusted ports configured.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.9 |
cienaCesDhcpRelayAgentL2InvalidConfigPktDropThis MIB object reports the number of DHCP packets dropped because the L2 relay agent configuration is invalid.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.10 |
cienaCesDhcpRelayAgentL2GeneralErrorsThis MIB object reports the number of general errors encountered by the L2 relay agent.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.11 |
cienaCesDhcpRelayAgentL2Option82ReplacedThis MIB object reports the number of packets that have had option 82 replaced.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.12 |
cienaCesDhcpRelayAgentL2ForRelayThis MIB object reports the number of packets received by the relay that were actually intended for the relay.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.13 |
cienaCesDhcpRelayAgentL2ClientRelayedThis MIB object reports the number of client messages relayed.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.14 |
cienaCesDhcpRelayAgentL2ServerRelayedThis MIB object reports the number of server messages relayed.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.6.1.15 |
cienaCesDhcpRelayAgentGlobalStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.6.1.7 |
cienaCesDhcpRelayAgentL2GlobalStatsClearThis object, when set to 'true', clears the global statistics for the L2 DHCP relay.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.3.6.1.7.1 |
cienaCesDhcpRelayAgentL2RelayedThis object reports the number of packets that passed through the L2 relays (processed and not dropped).ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.7.2 |
cienaCesDhcpRelayAgentL2DroppedThis object reports the number of packets dropped by the relay. Inspect the detailed statistic on each relay for more details related to dropped frames.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.7.3 |
cienaCesDhcpRelayAgentL2ForwardedThis object reports the number of packets forwarded rather than relayed. These are valid frames that didn't need to be processed by the relay.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.7.4 |
cienaCesDhcpRelayAgentL2NotForRelayThis object reports the number of packets received by the relay but not intended for the relay. Inspect the detailed statistic on each relay for more details related to dropped frames.ro Counter32 .1.3.6.1.4.1.1271.2.3.6.1.7.5 |
CIENA-CES-DHCP-RELAY-MIB Technical Reference Overview
The CIENA-CES-DHCP-RELAY-MIB SNMP MIB module published by Ciena defines 45 managed OID objects, including 35 scalar/column metrics, 3 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.3.6. Key tabular structures include cienaCesDhcpRelayAgentL2StateTable, cienaCesDhcpRelayAgentL2StatsTable, cienaCesDhcpRelayAgentTrustTable.
Key OID Definitions in CIENA-CES-DHCP-RELAY-MIB
.1.3.6.1.4.1.1271.2.3.6.1.2Tables that allow changing the configuration of DHCP relay agent functionality for each cienaCesDhcpRelayAgentVs.
.1.3.6.1.4.1.1271.2.3.6.1.6Table to display L2 statistics for each cienaCesDhcpRelayAgentVs.
.1.3.6.1.4.1.1271.2.3.6.1.5This table is used to specify the DHCP relay attributes of logical interfaces to which DHCP relay agents are attached. Entries in this table are created when a DHCP relay agent is created and attached to a VS that already has logical interfaces, or when logical interfaces are added to a VS for which a DHCP relay is already created and attached.
.1.3.6.1.4.1.1271.2.3.6.1.1.1This object specifies the type of circuit ID to be used by the DHCP relay agent. It can be set to li, port, cidString or liVs.
.1.3.6.1.4.1.1271.2.3.6.1.7.3This object reports the number of packets dropped by the relay. Inspect the detailed statistic on each relay for more details related to dropped frames.
.1.3.6.1.4.1.1271.2.3.6.1.7.4This object reports the number of packets forwarded rather than relayed. These are valid frames that didn't need to be processed by the relay.
.1.3.6.1.4.1.1271.2.3.6.1.7.1This object, when set to 'true', clears the global statistics for the L2 DHCP relay.
.1.3.6.1.4.1.1271.2.3.6.1.7.5This object reports the number of packets received by the relay but not intended for the relay. Inspect the detailed statistic on each relay for more details related to dropped frames.
.1.3.6.1.4.1.1271.2.3.6.1.7.2This object reports the number of packets that passed through the L2 relays (processed and not dropped).
.1.3.6.1.4.1.1271.2.3.6.1.1.3Specifies the global administrative state of the DHCP L2 relay agent.
.1.3.6.1.4.1.1271.2.3.6.1.1.2This object specifies the type of remote agent ID to be used by the DHCP relay agent. It can be set to macAddress, hostName or ridString.
.1.3.6.1.4.1.1271.2.3.6.1.1.4Specifies whether or not the relay agent should replace an existing option 82.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.