CIENA-CES-8021X-MIB
The CIENA-CES-8021X-MIB module enables monitoring of IEEE 802.1X authentication states, session counts, and port-based access control configurations on Ciena Carrier Ethernet Service (CES) platforms acting as supplicants or authenticators. It provides visibility into EAPOL frame exchanges, authentication failures, and dynamic VLAN assignment events to verify network access security compliance.
Imported Objects
Objects
44 total| Object Name |
|---|
cienaCes8021xMIBThe MIB module is for 802.1x supplicant and authenticator
information. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.42 |
cienaCes8021xConf OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.1 |
cienaCes8021xGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.1.1 |
cienaCes8021xCompls OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.1.2 |
cienaCes8021xObjs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.2 |
cienaCes8021xPortTableTable with an entry for every port on the switch SEQUENCE OF CienaCes8021xPortEntry .1.3.6.1.4.1.1271.2.1.42.2.1 |
cienaCes8021xPortEntryAn entry (conceptual row) in the cienaCes8021xPortTable. CienaCes8021xPortEntry .1.3.6.1.4.1.1271.2.1.42.2.1.1 |
cienaCes8021xPortPgid of the port Unsigned32 .1.3.6.1.4.1.1271.2.1.42.2.1.1.1 |
cienaCes8021xRole802.1x role of the Port.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.1.1.2 |
cienaCes8021xAuthPortStatsClearSetting this MIB object to 'true' clears the authenticator port statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.42.2.1.1.3 |
cienaCes8021xNotificationAuthenticationEventThis object identifies the type of authentication event being communicated
in the notification in which this object is located.ro Enumeration .1.3.6.1.4.1.1271.2.1.42.2.1.1.4 |
cienaCes8021xSuppTableA table that contains the configuration objects for the
Supplicant PAE associated with each port.
An entry appears in this table for each port that may
authenticate itself when challenged by a remote system. SEQUENCE OF CienaCes8021xSuppEntry .1.3.6.1.4.1.1271.2.1.42.2.2 |
cienaCes8021xSuppEntryThe configuration information for a Supplicant PAE. CienaCes8021xSuppEntry .1.3.6.1.4.1.1271.2.1.42.2.2.1 |
cienaCes8021xSuppPortThe MIB object is used as an index in the table and specifies the pgid of the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.42.2.2.1.1 |
cienaCes8021xSuppUserNameUsername for authenticating this supplicant, also used as the 802.1x identity.
Setting this object to zero length string resets the username.rw DisplayString .1.3.6.1.4.1.1271.2.1.42.2.2.1.2 |
cienaCes8021xSuppPasswordThe password used with cienaCes8021xSuppUserName for EAP-MD5 authentication.
Doing a get on this object always returns a zero length string for security reasons.rw DisplayString .1.3.6.1.4.1.1271.2.1.42.2.2.1.3 |
cienaCes8021xSuppPortStatsClearSetting this MIB object to 'true' clears the supplicant port statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.42.2.2.1.5 |
cienaCes8021xSuppEAPMethodObsolete. Use cienaCes8021xSuppEAPAllowedMethods instead.rwobsolete Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.10 |
cienaCes8021xSuppEAPAllowedMethodsExtensible Authentication Protocol methods allowed for this supplicant.rw Bits .1.3.6.1.4.1.1271.2.1.42.2.2.1.11 |
cienaCes8021xSuppOperationalStateReturns the operational state of this supplicant.ro Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.12 |
cienaCes8021xSuppMutualAuthenticationAdminStateAdministratively enables/disables authentication of the
server by the supplicant. Applies to EAP-TLS.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.13 |
cienaCes8021xSuppCheckCertificateTimeAdminStateAdministratively enables/disables checking of the server's
certificate timestamp when doing mutual authentication.
Applies to EAP-TLS.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.14 |
cienaCes8021xSuppMutualAuthenticationOperStateReturns the operative state of mutual authentication checking.
Applies to EAP-TLS.ro Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.15 |
cienaCes8021xSuppCheckCertificateTimeOperStateReturns the operative state of certificate time stamp checking when
doing mutual authentication. Applies to EAP-TLS.ro Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.16 |
cienaCes8021xSuppDeviceCertificateStatusReturns the state of the supplicant device certificate.
Applies to EAP-TLS.ro Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.17 |
cienaCes8021xSuppSecretSets the pre-encrypted secret that shall be used along with the
username specified by cienaCes8021xSuppUserName to gain access
on a port. A get returns the encrypted secret for the supplicant.rw OCTET STRING .1.3.6.1.4.1.1271.2.1.42.2.2.1.18 |
cienaCes8021xSuppAdminStateThis object is used to specify the user administrative state
of the supplicant port.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.19 |
cienaCes8021xSuppEAPVersionThis object is used to specify the EAPoL version of the supplicant
port.rw Integer32 .1.3.6.1.4.1.1271.2.1.42.2.2.1.20 |
cienaCes8021xSuppOCSPAdminStateAdministratively enables/disables OCSP checking of the server's
certificate when doing mutual authentication.
Applies to EAP-TLS.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.21 |
cienaCes8021xSuppCertificateNameName of the certificate to be used for authenticating this supplicant.
Applies to EAP-TLS.rw DisplayString .1.3.6.1.4.1.1271.2.1.42.2.2.1.22 |
cienaCes8021xSuppMinimumTlsVersionThis object is used to specify the minimum TLS version that can be
used by the supplicant port.
Applies to EAP-TLS.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.23 |
cienaCes8021xSuppPeerCertReauthAdminStateAdministratively enables/disables peer certificate reauthentication
on this supplicant.
Applies to EAP-TLS.rw Enumeration .1.3.6.1.4.1.1271.2.1.42.2.2.1.24 |
cienaCes8021xGlobalAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.2.3 |
cienaCes8021xAuthStatsClearSetting this MIB object to 'true' clears the authenticator global statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.42.2.3.1 |
cienaCes8021xSuppStatsClearSetting this MIB object to 'true' clears the supplicant global statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.42.2.3.2 |
cienaCes8021xEvents OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.3 |
cienaCes8021xEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.42.3.0 |
cienaCes8021xMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.101 |
cienaCes8021xMIBNotification OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.101.0 |
cienaCes8021xSuppAuthenticationEventThis notification is generated when a supplicant authentication event,
as identified by the value of cienaCes8021xNotificationAuthenticationEvent
has occurred on the port identified by cienaCes8021xPort. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.101.0.1 |
cienaCes8021xAuthAuthenticationEventThis notification is generated when a authenticator authentication event,
as identified by the value of cienaCes8021xNotificationAuthenticationEvent
has occurred on the port identified by cienaCes8021xPort. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.101.0.2 |
cienaCes8021xGlobalStateChangeEventThis notification is generated when the dot1x global state is
changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.101.0.3 |
cienaCes8021xAuthConfigChangeEventThis notification is generated when a configuration change is made
in a dot1x authentication port. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.101.0.4 |
cienaCes8021xSuppConfigChangeEventThis notification is generated when a configuration change is made
in a dot1x supplicant port. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.101.0.5 |
CIENA-CES-8021X-MIB Technical Reference Overview
The CIENA-CES-8021X-MIB SNMP MIB module published by Ciena defines 44 managed OID objects, including 25 scalar/column metrics, 2 SNMP tables, and 5 trap/notification events anchored at base OID .1.3.6.1.4.1.1271.2.1.42. Key tabular structures include cienaCes8021xPortTable, cienaCes8021xSuppTable. Monitored SNMP traps/notifications include cienaCes8021xSuppAuthenticationEvent, cienaCes8021xAuthAuthenticationEvent, cienaCes8021xGlobalStateChangeEvent, cienaCes8021xAuthConfigChangeEvent, cienaCes8021xSuppConfigChangeEvent.
Key OID Definitions in CIENA-CES-8021X-MIB
.1.3.6.1.4.1.1271.2.1.42.2.1Table with an entry for every port on the switch
.1.3.6.1.4.1.1271.2.1.42.2.2A table that contains the configuration objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system.
.1.3.6.1.4.1.1271.2.2.101.0.1This notification is generated when a supplicant authentication event, as identified by the value of cienaCes8021xNotificationAuthenticationEvent has occurred on the port identified by cienaCes8021xPort.
.1.3.6.1.4.1.1271.2.2.101.0.2This notification is generated when a authenticator authentication event, as identified by the value of cienaCes8021xNotificationAuthenticationEvent has occurred on the port identified by cienaCes8021xPort.
.1.3.6.1.4.1.1271.2.2.101.0.3This notification is generated when the dot1x global state is changed.
.1.3.6.1.4.1.1271.2.2.101.0.4This notification is generated when a configuration change is made in a dot1x authentication port.
.1.3.6.1.4.1.1271.2.2.101.0.5This notification is generated when a configuration change is made in a dot1x supplicant port.
.1.3.6.1.4.1.1271.2.1.42.2.3.1Setting this MIB object to 'true' clears the authenticator global statistics.
.1.3.6.1.4.1.1271.2.1.42.2.3.2Setting this MIB object to 'true' clears the supplicant global statistics.
.1.3.6.1.4.1.1271.2.1.42.2.1.1An entry (conceptual row) in the cienaCes8021xPortTable.
.1.3.6.1.4.1.1271.2.1.42.2.1.1.1Pgid of the port
.1.3.6.1.4.1.1271.2.1.42.2.1.1.2802.1x role of the Port.
More MIBs from Ciena
Browse all CienaMIBs →The CIENA-CES-PM MIB module enables monitoring of performance statistics and error counters for Carrier Ethernet Service (CES) circuits on Ciena transport equipment. It provides access to specific PM metrics such as cell loss, delay, and jitter measurements required for Service Level Agreement (SLA) compliance verification.
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
The CIENA-WS-PM-MIB module enables SNMP-based retrieval of performance monitoring counters and statistics for Ciena Waveserver optical transport equipment. It specifically tracks operational metrics such as optical power levels, bit error rates, and interface utilization to facilitate network health assessment and fault isolation.
The CIENA-CES-CHASSIS-MIB enables monitoring and configuration of physical chassis attributes, including hardware inventory, slot status, and power supply states, on Ciena Carrier Ethernet Service (CES) platforms via SNMP. It facilitates the generation of chassis-specific traps to alert network operations on hardware failures, module insertions, or environmental threshold violations.
The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.