CANOPY-SYS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CANOPY-SYS-MIB.
52
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
motorola OBJECT IDENTIFIER .1.3.6.1.4.1.17713 |
RFC1155-SMI Unknown .1.3.6.1.4.1.17713 |
SNMPv2-TC NOTIFICATION-TYPE .1.3.6.1.4.1.17713 |
p2p OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1 |
configuration OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.5 |
iPAddressInternet protocol (IP) address. This address is used by
the family of Internet protocols to uniquely this
identify the unit on a networkro IpAddress .1.3.6.1.4.1.17713.1.5.1 |
subnetMaskA subnet allows the flow of network traffic between
hosts to be segregated based on a network
configuration. By organizing hosts into
logical groups, subnetting can improve network
security and performance.ro IpAddress .1.3.6.1.4.1.17713.1.5.2 |
gatewayIPAddressThe IP address of a computer on the current network that
is currently acting as a network gateway. A gateway
acts as an entrance / exit to packets from / to
other networks.ro IpAddress .1.3.6.1.4.1.17713.1.5.3 |
targetMACAddressMAC address of the PTP wireless unit forming the other
end of the PTP linkro OCTET STRING .1.3.6.1.4.1.17713.1.5.4 |
masterSlaveModeThe PTP wireless link operates using a master and slave
relationship.ro Enumeration .1.3.6.1.4.1.17713.1.5.5 |
maximumTransmitPowerMaximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless
linkro INTEGER (-15..25) .1.3.6.1.4.1.17713.1.5.6 |
licence OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.8 |
regionCodeThe region code prohibits the wireless unit from
operating outside the regulated limitsro INTEGER .1.3.6.1.4.1.17713.1.8.1 |
productVariantThe product variantro Enumeration .1.3.6.1.4.1.17713.1.8.2 |
productNameName of the product variantro DisplayString .1.3.6.1.4.1.17713.1.8.3 |
ethernetFibreSupportGigabit Ethernet fibre supportro Enumeration .1.3.6.1.4.1.17713.1.8.4 |
frequencyVariantFrequency variant of the wireless unitro Enumeration .1.3.6.1.4.1.17713.1.8.5 |
mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.9 |
targetRangeInitial target range used in installation +/-1,
expressed in tenths of a kilometer. When
Auto-Ranging this must be set to 0ro INTEGER .1.3.6.1.4.1.17713.1.9.1 |
rangingModeType of ranging to use during installation, either
Auto-Ranging or use a selectable Target
Rangero Enumeration .1.3.6.1.4.1.17713.1.9.2 |
phyControl OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.10 |
asymmetricTDDControl TDD Structurero Enumeration .1.3.6.1.4.1.17713.1.10.1 |
phyStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.12 |
receivePowerReceive power expressed in tenths of a dBmro INTEGER .1.3.6.1.4.1.17713.1.12.1 |
vectorErrorThe vector error measurement compares the received
signal's IQ modulation characteristics to an
ideal signal to determine the composite error
vector magnitude. The value represented by this
attribute is the average vector error over the
previous second expressed in tenths of a dBro INTEGER .1.3.6.1.4.1.17713.1.12.2 |
transmitPowerTransmit power expressed in tenths of a dBmro INTEGER .1.3.6.1.4.1.17713.1.12.3 |
rangeDistance between the two peer wireless units expressed
in tenths of a kilometerro INTEGER .1.3.6.1.4.1.17713.1.12.4 |
linkLossThe wireless link loss expressed in tenths of a dBro INTEGER (-500..500) .1.3.6.1.4.1.17713.1.12.5 |
receiveChannelCurrent active receive channelro INTEGER .1.3.6.1.4.1.17713.1.12.6 |
transmitChannelCurrent active transmit channelro INTEGER .1.3.6.1.4.1.17713.1.12.7 |
receiveModulationModeCurrent active receive modulation modero Enumeration .1.3.6.1.4.1.17713.1.12.8 |
transmitModulationModeCurrent active transmit modulation modero Enumeration .1.3.6.1.4.1.17713.1.12.9 |
receiveFreqCurrent receive frequency expressed in MHzro INTEGER .1.3.6.1.4.1.17713.1.12.11 |
transmitFreqCurrent transmit frequency expressed in MHzro INTEGER .1.3.6.1.4.1.17713.1.12.12 |
signalStrengthRatioSignal strength ratio (Vertical / Horizontal) expressed
in tenths of a dBro INTEGER .1.3.6.1.4.1.17713.1.12.13 |
reset OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.18 |
systemResetSetting this attribute to '1' will cause a system
rebootrw Enumeration .1.3.6.1.4.1.17713.1.18.1 |
versions OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.19 |
softwareVersionCurrent software versionro DisplayString .1.3.6.1.4.1.17713.1.19.1 |
hardwareVersionHardware platform version.ro DisplayString .1.3.6.1.4.1.17713.1.19.2 |
secondarySoftwareVersionSecondary software version, used when the primary
software image is invalid or erasedro DisplayString .1.3.6.1.4.1.17713.1.19.3 |
bootVersionBoot code software versionro DisplayString .1.3.6.1.4.1.17713.1.19.4 |
pubStats OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.20 |
receiveDataRateAverage data rate over the last one second interval
expressed in kbpsro INTEGER .1.3.6.1.4.1.17713.1.20.1 |
transmitDataRateAverage data rate over the last one second interval
expressed in kbpsro INTEGER .1.3.6.1.4.1.17713.1.20.2 |
aggregateDataRateAverage data rate over the last one second interval
expressed in kbpsro INTEGER .1.3.6.1.4.1.17713.1.20.3 |
encryption OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.22 |
encryptionAlgorithmThe Encryption Algorithm used by the wireless link. You
should be aware that enabling encryption results
in a reduction in available data bandwidth N.B. The
same Encryption Algorithm must be configured at BOTH
ends of the link for it to function correctly.ro Enumeration .1.3.6.1.4.1.17713.1.22.1 |
p2pTraps OBJECT IDENTIFIER .1.3.6.1.4.1.17713.1.99 |
dfsChannelChangeTrapDFS channel change event NOTIFICATION-TYPE .1.3.6.1.4.1.17713.1.99.1 |
dfsImpulsiveInterferenceDetectedTrapDFS impulsive interference detected event NOTIFICATION-TYPE .1.3.6.1.4.1.17713.1.99.2 |
p2mp OBJECT IDENTIFIER .1.3.6.1.4.1.17713.2 |