CADANT-TRAP-LOG-MIB
AI MIB Summary
The CADANT-TRAP-LOG-MIB enables the configuration and retrieval of proprietary event notification (SNMP trap) and system logging parameters for Cadant network devices. It facilitates the monitoring of internal device event states and the management of logging thresholds to ensure comprehensive audit trails and real-time alerting for proprietary hardware operations.
This MIB defines objects which are used to control and report on Cadant proprietary event notificaton (trap) and logging operation.
Main OID:
cadTrapLogMib.1.3.6.1.4.1.4998.1.1.6.2
28
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
cadTrapLogMibThis MIB defines objects which are used to control and
report on Cadant proprietary event notificaton (trap) and
logging operation. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.6.2 |
cadTrapLogGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.6.2.1 |
cadProprietaryLoggingEnabledIf this value is set to true, then all Cadant proprietary log
entries are enabled. Otherwise, the syslog logs will consist only
of standard logs entries.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.6.2.1.1 |
cadLocalLogSizeThe maximum size of the local log, in number of entries. The local log
is only what is put into the docsDevEventTable.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.6.2.1.2 |
cadLogHistorySizeThe maximum size of the log history, in number of entries. This log
contains both Cadant prioprietary and DOCSIS notifications.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.6.2.1.3 |
cadSyslogFacilityThe syslog logging facility.rw Enumeration .1.3.6.1.4.1.4998.1.1.6.2.1.4 |
cadCmTrapInhibitControls the generation of SNMP traps regarding to CM status change. A cleared bit indicates that a
trap must be generated if a CM resets while in the corresponding state. If resetRanging(0) is
clear, a CM reset while in the ranging state will generate a cmResetNotification trap. If
resetProvisioning(1) is clear, a CM reset while in the rangingComplete or ipComplete states
will generate a cmResetNotification trap. If resetRegistered(2) is clear, a CM reset while in the
registrationComplete state will generate a cmResetNotification trap. If resetClear(3) is clear,
a on-line CM from previous flap will generate a cmResetClearNotification trap. If registered(4) is
clear, a registered CM will generate a cmRegistrationNotification trap.rw Bits .1.3.6.1.4.1.4998.1.1.6.2.1.5 |
cadEvControlTableThis table allows control of the reporting of event classes.
For each event priority, a combination of logging and
reporting mechanisms may be chosen. SEQUENCE OF CadEvControlEntry .1.3.6.1.4.1.4998.1.1.6.2.2 |
cadEvControlEntryAllows configuration of the reporting mechanisms for a
particular event priority. CadEvControlEntry .1.3.6.1.4.1.4998.1.1.6.2.2.1 |
cadEvReportingCurrently, only the console destination is persistent in SNMP.
Transient sessions, such as telnet, are not configurable via the MIB.
Those are configurable only via CLI.rw Bits .1.3.6.1.4.1.4998.1.1.6.2.2.1.1 |
cadEvOverrideTableThis table allows the event priority to be overridden.
Each entry indicates an override condition for the given
event. SEQUENCE OF CadEvOverrideEntry .1.3.6.1.4.1.4998.1.1.6.2.3 |
cadEvOverrideEntryAllows configuration of the event priority overrides. CadEvOverrideEntry .1.3.6.1.4.1.4998.1.1.6.2.3.1 |
cadEvOvrdEvIdUniquely identifies the type of event that is reported
by this entry.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.6.2.3.1.1 |
cadEvOvrdStateIndicates the current override state of the event.
admit allows the event to be generated and inhibit
prevents the event from being generated regardless
of the priority is enabled for the event. Setting
the priority allows the event to generated with the
desired priority.rw Enumeration .1.3.6.1.4.1.4998.1.1.6.2.3.1.2 |
cadEvOvrdRowStatusThis variable indicates the status of the entry.
Valid values for a set include createAndGo(4) and
destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.6.2.3.1.3 |
cadEvOvrdPriorityThis field is only valid when the override state is
set to priority and indicates the priority level that
should be used when this notification is generated.rw Enumeration .1.3.6.1.4.1.4998.1.1.6.2.3.1.4 |
cadSyslogSvrTableThis table stores syslog server information when
there is more than one syslog server configured. SEQUENCE OF CadSyslogSvrEntry .1.3.6.1.4.1.4998.1.1.6.2.4 |
cadSyslogSvrEntrySyslog server information. CadSyslogSvrEntry .1.3.6.1.4.1.4998.1.1.6.2.4.1 |
cadSyslogSvrIpAddrIP address of the syslog server. InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.6.2.4.1.1 |
cadSyslogSvrFacilityFacility associated with the syslog server.rw Enumeration .1.3.6.1.4.1.4998.1.1.6.2.4.1.2 |
cadSyslogSvrRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.6.2.4.1.3 |
cadCliAuthToLogLevelTableThis table is used to configure the logging level for
each of the CLI authorization levels. SEQUENCE OF CadCliAuthToLogLevelEntry .1.3.6.1.4.1.4998.1.1.6.2.5 |
cadCliAuthToLogLevelEntrySyslog server information. CadCliAuthToLogLevelEntry .1.3.6.1.4.1.4998.1.1.6.2.5.1 |
cadCliAuthLevelA CLI authorization level. Integer32 .1.3.6.1.4.1.4998.1.1.6.2.5.1.1 |
cadCliLogLevelThe logging level that all commands assigned to this authorization
level will be output at when executed.rw Enumeration .1.3.6.1.4.1.4998.1.1.6.2.5.1.2 |
cadTrapLogMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.6.2.10 |
cadTrapLogCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.6.2.10.1 |
cadTrapLogGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.6.2.10.2 |