CADANT-MPLS-MIB
AI MIB Summary
The CADANT-MPLS-MIB provides proprietary management access to monitor and configure Multiprotocol Label Switching (MPLS) forwarding tables, label bindings, and traffic engineering parameters on Arris (formerly Cadant) carrier-grade routers. This module enables the collection of specific MPLS operational metrics, including label distribution protocol states, pseudowire status, and interface label usage statistics for network troubleshooting and capacity planning.
This is the management MIB contains Cadant proprietary MPLS MIB information. Copyright 2013 Arris International, Inc. All rights reserved.
Main OID:
cadMplsMIB.1.3.6.1.4.1.4998.1.1.130.1
14
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
cadMplsMIBThis is the management MIB contains Cadant proprietary MPLS MIB information. Copyright 2013 Arris International, Inc. All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.130.1 |
cadMplsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.130.1.1 |
cadMplsParams OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.130.1.1.1 |
cadMplsLdpHelloHoldTimerThe 16-bit integer value which is the configured link Hello hold timer for the local LDP router in seconds. A value of 65535 means infiniterw Unsigned32 .1.3.6.1.4.1.4998.1.1.130.1.1.1.1 |
cadMplsLdpTargetedHelloHoldTimerThe 16-bit integer value which is the configured targeted Hello hold timer for the local LDP router in seconds. A value of 65535 means infiniterw Unsigned32 .1.3.6.1.4.1.4998.1.1.130.1.1.1.2 |
cadMplsLdpKeepAliveHoldTimerThe 16-bit integer value which is the configured Keep Alive hold timer for the local LDP router in seconds.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.130.1.1.1.3 |
cadMplsLdpVcDescriptionThis is the 64 byte string configured as an LDP Interface Parameter PW Description.rw DisplayString .1.3.6.1.4.1.4998.1.1.130.1.1.1.4 |
cadMplsLdpNeighborTableMPLS LDP neighbor table. SEQUENCE OF CadMplsLdpNeighborEntry .1.3.6.1.4.1.4998.1.1.130.1.1.2 |
cadMplsLdpNeighborEntry CadMplsLdpNeighborEntry .1.3.6.1.4.1.4998.1.1.130.1.1.2.1 |
cadMplsLdpNeighborAddressTypeThis is the MPLS Peer Address Type. Only ipv4(1) or ipv6(2) will be supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.130.1.1.2.1.1 |
cadMplsLdpNeighborIpAddressThis is the IP address of the LDP neighbor. IPv4 and IPv6 addresses are supported. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.130.1.1.2.1.2 |
cadMplsLdpNeighborPasswordThis is the MD5 password used for TCP authentication for this LDP neighbor.rw OCTET STRING .1.3.6.1.4.1.4998.1.1.130.1.1.2.1.3 |
cadMplsLdpNeighborTargetedPeerIf this value is set to true, then this neighbor is a CLI configured Targeted LDP peer. The CMTS will consider this peer eligible so will accept discovery messages from it and will actively try to establish a T-LDP session with the peer. If this value is set to false then this neighbor is a regular link LDP neighbor and a row in this table will be used for storing the password only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.130.1.1.2.1.4 |
cadMplsLdpNeighborRowStatusRow Status for this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.130.1.1.2.1.5 |