CADANT-IPDR-MIB
AI MIB Summary
The CADANT-IPDR-MIB enables SNMP-based configuration and status monitoring of C4 IPDR (IP Detail Records) generation parameters and operational states on Cadant network devices. It facilitates the management of session accounting data, including call detail record (CDR) generation triggers, buffer thresholds, and transmission status for billing and traffic analysis systems.
This MIB modules contains the definitions to support configuration and status for C4 IPDR implementation.
Main OID:
cadIpdrMib.1.3.6.1.4.1.4998.1.1.100.30
89
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
cadIpdrMibThis MIB modules contains the definitions to support configuration and status for C4 IPDR implementation. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.100.30 |
cadIpdrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.100.30.1 |
cadIpdrExportEnabledIPDR streams is enabled or disabled. When enabled the cadIpdrQueryPort and cadIpdrStreamingPort will be open to listen for collector connections. When disabled, all ports will be closed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.1 |
cadIpdrQueryPortUDP port used to listen for collector queries.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.2 |
cadIpdrStreamingPortTCP port used to listen for collector connections.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.3 |
cadIpdrDataAckWindowMaximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector. Applicable to DOCSIS 2.0 mode.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.4 |
cadIpdrDataAckTimeoutMaximum elapsed time before a DATA message must be acknowledged by the collector. Applicable to DOCSIS 2.0 mode.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.5 |
cadIpdrKeepAliveIntervalMaximum duration of protocol silence before a KEEPALIVE message must be sent.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.6 |
cadIpdrExportAllCountsExport all counts if true, and supress duplicate counts if false. The default is false. Applicable to DOCSIS 2.0 mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.7 |
cadIpdrExportCpeInfoExport information about CPEs behind CMs (CmCpeInfoList) if set to true. If false, supress information about CPEs. The default is false. Applicable to DOCSIS 2.0 mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.8 |
cadIpdrSessionIdsession-id used in the header of IPDR protocol messages. The default is 1. Applicable to DOCSIS 2.0 mode.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.9 |
cadIpdrExportModeDOCSIS mode exporter, either DOCSIS 2.0 or DOCSIS 3.0. The default is DOCSIS 2.0 mode, or 1.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.10 |
cadIpdrCollectorTableA priority ordered list of collectors that will be allowed to connect to the exporter. The highest priority active collector is designated the primary collector. This list is exclusive and any collector not in this list will be ignored. Applicable to DOCSIS 2.0 mode. SEQUENCE OF CadIpdrCollectorEntry .1.3.6.1.4.1.4998.1.1.100.30.1.11 |
cadIpdrCollectorEntry CadIpdrCollectorEntry .1.3.6.1.4.1.4998.1.1.100.30.1.11.1 |
cadIpdrCollectorPriorityThe collector priority. Lower values indicate higher priority. The default priority is 1. Applicable to DOCSIS 2.0 mode. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.1 |
cadIpdrCollectorIpAddrTypeThe type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4. Applicable to DOCSIS 2.0 mode.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.2 |
cadIpdrCollectorIpAddressSource IP address of a collector that will be permitted to connect to the exporter. Applicable to DOCSIS 2.0 mode. InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.3 |
cadIpdrCollectorPortDestination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled. Applicable to DOCSIS 2.0 mode.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.4 |
cadIpdrCollectorActiveTrue if this collector is connected to the exporter. Applicable to DOCSIS 2.0 mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.5 |
cadIpdrCollectorPrimaryTrue if this collector is the primary collector. Applicable to DOCSIS 2.0 mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.6 |
cadIpdrCollectorOutIntRecsNumber of interim data records exported to this collector. Applicable to DOCSIS 2.0 mode.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.7 |
cadIpdrCollectorOutStpRecsNumber of stop data records exported to this collector. Applicable to DOCSIS 2.0 mode.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.8 |
cadIpdrCollectorSupIntRecsNumber of interim data records suppressed for this collector. Applicable to DOCSIS 2.0 mode.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.9 |
cadIpdrCollectorStatusRow control for this collector. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.10 |
cadIpdrReportCycleTableA list of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to DOCSIS 2.0 mode. SEQUENCE OF CadIpdrReportCycleEntry .1.3.6.1.4.1.4998.1.1.100.30.1.12 |
cadIpdrReportCycleEntry CadIpdrReportCycleEntry .1.3.6.1.4.1.4998.1.1.100.30.1.12.1 |
cadIpdrReportStartHHThe report cycle start hour. The default is 00. Applicable to DOCSIS 2.0 mode. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.1 |
cadIpdrReportStartMMThe report cycle start minutes after the hour. Default is 00. Applicable to DOCSIS 2.0 mode. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.2 |
cadIpdrReportIntervalThe report cycle interval duration in minutes. The default is 60 minutes. Applicable to DOCSIS 2.0 mode.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.3 |
cadIpdrReportOutIntRecsNumber of interim data records exported during this report cycle. Applicable to DOCSIS 2.0 mode.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.4 |
cadIpdrReportOutStpRecsNumber of stop data records exported during this report cycle. Applicable to DOCSIS 2.0 mode.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.5 |
cadIpdrReportSupIntRecsNumber of interim data records suppressed during this report cycle. Applicable to DOCSIS 2.0 mode.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.6 |
cadIpdrReportStatusRow control for this report cycle. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.7 |
cadIpdrServiceTableA session-id ordered list of services that will be allowed to be requested by the Collector. This list is exclusive and are used when the exporter is in DOCSIS 3.0 mode. SEQUENCE OF CadIpdrServiceEntry .1.3.6.1.4.1.4998.1.1.100.30.1.13 |
cadIpdrServiceEntry CadIpdrServiceEntry .1.3.6.1.4.1.4998.1.1.100.30.1.13.1 |
cadIpdrServiceSessionIdThe session-id used in the header of IPDR protocol messages. The default is 1. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.1 |
cadIpdrServiceTypeThe session service types are unknown(0), samis_1(1), samis_2(2), cpe(3), cm_reg(4), cm_us(5), spect(6), diag(7), topo(8), us_util(9), ds_util(10), diag_evt(11), diag_det(12), cm_sf(13), cpe_a2(14), mcast(15). The default is 1.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.2 |
cadIpdrServiceMethodThe session service method (unknown, time, event, adhoc). The default is time.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.3 |
cadIpdrServicePriorityThe session priority. Lower values indicate higher priority. This object is not used.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.4 |
cadIpdrServiceDataAckWindowThe session maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.5 |
cadIpdrServiceDataAckTimeoutThe session maximum elapsed time before a DATA message must be acknowledged by the collector.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.6 |
cadIpdrServiceReportCycleSetThe session report cycle set.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.7 |
cadIpdrServiceEvtPaceGapThe session event pace gap.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.8 |
cadIpdrServiceAllCountsExport all counts if true, and supress duplicate counts if false. The default is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.9 |
cadIpdrServiceStatusRow control for this service. The only valid values for this object are createAndGo, destroy, and active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.10 |
cadIpdrReportCycleSetTableA list of sets of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to DOCSIS 3.0 mode. SEQUENCE OF CadIpdrReportCycleSetEntry .1.3.6.1.4.1.4998.1.1.100.30.1.14 |
cadIpdrReportCycleSetEntry CadIpdrReportCycleSetEntry .1.3.6.1.4.1.4998.1.1.100.30.1.14.1 |
cadIpdrReportCycleSetSetThe report cycle set id number. The default is 1. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.1 |
cadIpdrReportCycleSetStartHHThe report cycle set start hour. The default is 00. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.2 |
cadIpdrReportCycleSetStartMMThe report cycle set start minutes after the hour. Default is 00. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.3 |
cadIpdrReportCycleSetIntervalThe report cycle set interval duration in minutes. The default is 60 minutes.rw INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.4 |
cadIpdrReportCycleSetStatusRow control for this report cycle set entry. The only valid values for this object are createAndGo, destroy, and active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.5 |
cadIpdrCountsTableA session-id/priority/collector ordered list of counts for all sessions. Applicable to DOCSIS 2.0 and 3.0 modes. SEQUENCE OF CadIpdrCountsEntry .1.3.6.1.4.1.4998.1.1.100.30.1.15 |
cadIpdrCountsEntry CadIpdrCountsEntry .1.3.6.1.4.1.4998.1.1.100.30.1.15.1 |
cadIpdrCountsSessionIdThe counts session-id used in the header of IPDR protocol messages. The default is 1. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.1 |
cadIpdrCountsCollectorPriorityThe counts collector priority. Lower values indicate higher priority. The default priority is 1. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.2 |
cadIpdrCountsCollectorIpAddressThe counts source IP address of a collector that will be permitted to connect to the exporter. InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.3 |
cadIpdrCountsStartHHThe counts report cycle start hour. The default is 00. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.4 |
cadIpdrCountsStartMMThe counts report cycle start minutes after the hour. Default is 00. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.5 |
cadIpdrCountsAdhocIndexThe counts adhoc index. Unsigned32 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.6 |
cadIpdrCountsStartTimeThe counts report cycle start time. Default is 0 length.rw OCTET STRING .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.7 |
cadIpdrCountsStopTimeThe counts report cycle stop time. Default is 0 length.rw OCTET STRING .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.8 |
cadIpdrCountsIntRecsNumber of interim data records exported for this session-id to this collector.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.9 |
cadIpdrCountsSupIntRecsNumber of interim data records suppressed for this session-id to this collector.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.10 |
cadIpdrCountsStartRecsNumber of start data records exported for this session-id to this collector.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.11 |
cadIpdrCountsStopRecsNumber of stop data records exported for this session-id to this collector.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.12 |
cadIpdrCountsEventRecsNumber of event data records exported for this session-id to this collector.ro Counter64 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.13 |
cadIpdrCountsStatusRow control for this counts entry. The only valid values for this object are createAndGo, destroy, and active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.14 |
cadIpdrSessionCollectorTableA session and priority ordered list of collectors that is used to track the Active and Primary status of the collector relative to this session. Applicable to DOCSIS 3.0 mode. SEQUENCE OF CadIpdrSessionCollectorEntry .1.3.6.1.4.1.4998.1.1.100.30.1.16 |
cadIpdrSessionCollectorEntry CadIpdrSessionCollectorEntry .1.3.6.1.4.1.4998.1.1.100.30.1.16.1 |
cadIpdrSessionCollectorSessionIdThe counts session-id used in the header of IPDR protocol messages. The default is 1. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.1 |
cadIpdrSessionCollectorPriorityThe collector priority. Lower values indicate higher priority. The default priority is 1. INTEGER .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.2 |
cadIpdrSessionCollectorIpAddrTypeThe type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.3 |
cadIpdrSessionCollectorIpAddressSource IP address of a collector that will be permitted to connect to the exporter. InetAddressIPv4or6 (CADANT-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.4 |
cadIpdrSessionCollectorPortDestination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.5 |
cadIpdrSessionCollectorActiveTrue if this collector is connected to the exporter for this session.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.6 |
cadIpdrSessionCollectorPrimaryTrue if this collector is the primary collector for this session.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.7 |
cadIpdrSessionCollectorStatusRow control for this collector. The only valid values for this object are createAndGo, destroy, and active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.8 |
cadIpdrMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.100.30.2 |
cadIpdrMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.100.30.2.1 |
cadIpdrMIBComplianceThe compliance statement for the Arris IPDR implementation. Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.1.1 |
cadIpdrMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.100.30.2.2 |
cadIpdrBasicGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.1 |
cadIpdrCollectorGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.2 |
cadIpdrReportGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.3 |
cadIpdrServiceGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.4 |
cadIpdrReportCycleSetGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.5 |
cadIpdrCountsGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.6 |
cadIpdrSessionCollectorGroup Unknown .1.3.6.1.4.1.4998.1.1.100.30.2.2.7 |