CADANT-CMTS-SPECTRUM-MGMT-MIB
AI MIB Summary
The CADANT-CMTS-SPECTRUM-MGMT-MIB provides management access to upstream spectrum parameters, including channel power levels, noise floor measurements, and modulation profiles, specifically for Cisco C4-class Cable Modem Termination Systems. This module enables the monitoring and configuration of upstream frequency allocation and signal quality metrics to maintain DOCSIS compliance and optimize cable network performance.
The MIB module describes the C4 Upstream Spectrum Management
Main OID:
cadSpMgtMib.1.3.6.1.4.1.4998.1.1.15.4
64
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
64 total| Object Name |
|---|
cadSpMgtMibThe MIB module describes the C4 Upstream Spectrum Management MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.15.4 |
cadSpMgtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.15.4.1 |
cadSpMgtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.15.4.2 |
cadSpMgtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.15.4.2.1 |
cadSpMgtGroupTableEach entry in this table defines a C4 Upstream Spectrum
Management group. SEQUENCE OF CadSpMgtGroupEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.1 |
cadSpMgtGroupEntryA set of C4 Upstream Spectrum Management group information.
Entries in the cadSpMgtGroupTable are created and
deleted using the cadSpMgtGroupRowStatus object. CadSpMgtGroupEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1 |
cadSpMgtGroupIndexThe index used to identify the Upstream Spectrum Group. Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.1 |
cadSpMgtGroupSamplePeriodThe time (in seconds) between samples used for the degradation
and the improvement triggers.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.2 |
cadSpMgtGroupHopPeriodThe minimum period of time (in seconds) that must pass between
successive state transitions.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.3 |
cadSpMgtGroupCodewordThe minimum number of codewords that must have been transmitted
on the upstream channel before the degradation and improvement
triggers are considered to be valid.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.4 |
cadSpMgtGroupRetryPeriodThis object specifies the minimum wait time (in seconds)
before the retry is attempted. The retry-period timer controls
how quickly the state machine is allowed to retry when
transition failure occurred.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.5 |
cadSpMgtGroupEnabledThis object allows for the optional enabling and disabling of a
spectrum group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.6 |
cadSpMgtGroupRowStatusThe status of this conceptual row. To create a row in this
table, set this object to createAndGo(4). Support of the values
includes createAndGo(4) and destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.7 |
cadSpMgtStateTableEach entry in this table defines a state used for C4 Upstream
Spectrum Management. SEQUENCE OF CadSpMgtStateEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.2 |
cadSpMgtStateEntryA set of Upstream Spectrum Management state information.
Entries in the cadSpMgtStateTable are created and
deleted using the cadSpMgtStateRowStatus object. CadSpMgtStateEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1 |
cadSpMgtStateIndexThe index used to identify the state in C4 Upstream Spectrum
Management. Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.1 |
cadSpMgtStateFrequencyThe center of the frequency band for the upstream channel
associated with this state.rw Integer32 (0 | 5000000..85000000) UNITS "hertz" .1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.2 |
cadSpMgtStateWidthThe bandwidth for the upstream channel associated with this
state.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.3 |
cadSpMgtStateModulationProfileAn entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes the upstream channel
associated with this state.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.4 |
cadSpMgtStateRowStatusThe status of this conceptual row. To create a row in this
table, set this object to createAndGo(4). Support of the
values includes createAndGo(4) and destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.5 |
cadSpMgtTriggerTableEach entry in this table defines a trigger for C4 Upstream
Spectrum Management SEQUENCE OF CadSpMgtTriggerEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.3 |
cadSpMgtTriggerEntryA set of Upstream Spectrum Management trigger information.
Entries in the cadSpMgtTriggerTable are created and
deleted using the cadSpMgtTriggerRowStatus object. CadSpMgtTriggerEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1 |
cadSpMgtTriggerIndexThe trigger index used to identify the trigger for each state
transition. Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.1 |
cadSpMgtTriggerTypeThe trigger type.rw SpTriggerType .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.2 |
cadSpMgtTriggerDayThe trigger day is to specify the reoccurrence of the TOD
trigger for a week. The trigger day has the following defined
values:
0: Sunday
1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
7: Everydayrw SpTriggerDay .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.3 |
cadSpMgtTriggerTODTime of day to transition to next state, in HH:MM:SS formatrw SpTimeOfDay .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.4 |
cadSpMgtTriggerPeriodThe amount of time that should be loaded into a timer, in
seconds, once the state machine has transitioned into the
associated current state. When the timer expires, the transition
to next state defined in the state machine is executed. This
value is an integer between 1 and 604,800 (which covers a period
of a week). This object is applicable for trigger type of
periodic(2)rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.5 |
cadSpMgtTriggerThres1This object is applicable for trigger type of degradation (3)
and improvement (4).
For degradation trigger, this is the maximum acceptable
percentage of FEC errors (uncorrectable plus correctable).
For improvement trigger, this is the minimum acceptable
percentage of FEC errors (uncorrectable plus correctable)rw Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.6 |
cadSpMgtTriggerThres2This object is applicable for trigger type of degradation (3)
and improvement (4).
For degradation trigger, this is the maximum acceptable
percentage of uncorrectable FEC errors.
For improvement trigger, this is the minimum acceptable
percentage of uncorrectable FEC errors.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.7 |
cadSpMgtTriggerThres3This object is applicable for trigger type of degradation (3)
and improvement (4).
For degradation trigger, this is the minimum acceptable
Signal/Noise ratio (in dB).
For improvement trigger, this is the maximum acceptable
Signal/Noise ratio (in dB).rw TenthdB .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.8 |
cadSpMgtTriggerRowStatusThe status of this conceptual row. To create a row in this
table, set this object to createAndGo(4). Support of the values
includes createAndGo(4) and destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.9 |
cadSpMgtStateTransTableEach entry in this table defines the state machine in C4 Upstream Spectrum Management. SEQUENCE OF CadSpMgtStateTransEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.4 |
cadSpMgtStateTransEntry CadSpMgtStateTransEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.4.1 |
cadSpMgtTransNextStateThe index used to identify the next state to which the state
machine may transition to as a result of this trigger.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.4.1.1 |
cadSpMgtStateTransRowStatusThe status of this conceptual row. To create a row in this
table, set this object to createAndGo(4). Support of the values
includes createAndGo(4) and destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.4.1.2 |
cadSpMgtHistoryTableTable of state transition history. SEQUENCE OF CadSpMgtHistoryEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.5 |
cadSpMgtHistoryEntryEntry of state transition history. CadSpMgtHistoryEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1 |
cadSpMgtHistoryUpChannelIfIndexIfIndex of the upstream channel. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.1 |
cadSpMgtHistoryTimeThe value of this object is the actual clock time
when this entry was created. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.2 |
cadSpMgtHistoryTriggerIndexThe trigger index used to identify the trigger for state
transition. A value of 0 indicates a manual trigger.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.3 |
cadSpMgtHistoryFromStateIndexThe index used to identify the current state.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.4 |
cadSpMgtHistoryNextStateIndexThe index used to identify the next state to which the state
machine may transition to.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.5 |
cadSpMgtHistoryResultStateIndexThe index used to identify the result state to which the state
machine has transitioned to. For a successful state transition
request, the value of this object is the same as
cadSpMgtHistoryNextState.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.6 |
cadSpMgtHistorySNRThis object is the measured Signal/Noise ratio (in dB) for the
upstream channel. This object is applicable when the value in
cadSpMgtHistoryTriggerIndex defines the trigger of type
degradation or improvement.ro TenthdB UNITS "dB" .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.7 |
cadSpMgtHistoryUFecErrorThis object is the measured percentage of uncorrectable
FEC errors for the upstream channel. This object is applicable
when the value in cadSpMgtHistoryTriggerIndex defines the trigger
of type degradation or improvement.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.8 |
cadSpMgtHistoryFecErrorThis object is the measured percentage of FEC errors
(uncorrectable plus correctable) for the upstream channel.
This object is applicable when the value in
cadSpMgtHistoryTriggerIndex defines the trigger of type
degradation or improvement.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.9 |
cadSpMgtHistorySpareCardIdThe cardId of the spare CAM. The value of 0 indicates the
CAM is not spared at the time the request is received.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.10 |
cadSpMgtHistoryTextThis object provides a human-readable description of the entry,
including all relevant context.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.11 |
cadSpMgtHistoryGroupIdThe Upstream Spectrum Group index associated with the upstream channel.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.12 |
cadSpMgtHistoryStateChangeCountProvides the count of state changes in the history entry. This object will
always increase. It is 16 bits, once it is at 0xffff, the counter will roll
over and start from beginning.ro Unsigned16 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.13 |
cadSpMgtHistorySysUpTimeProvides the system up time in the history entry. This object will
always increase.ro Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.14 |
cadSpMgtUpChannelTableThis table describes Upstream Frequency Agility attributes of
attached upstream channels. SEQUENCE OF CadSpMgtUpChannelEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.6 |
cadSpMgtUpChannelEntryThe List of Upstream Frequency Agility attributes associated with
an upstream channel. CadSpMgtUpChannelEntry .1.3.6.1.4.1.4998.1.1.15.4.2.1.6.1 |
cadSpMgtUpChannelCurrStateThe current state as a result of the upstream spectrum group
state transition. This object is only applicable if upstream
spectrum management is enabled for this upstream channel.ro Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.1.6.1.1 |
cadSpMgtUpChannelStateTransTimeThe value of this object is the actual clock time when the current
state information in cadIfUpChannelSpGroupCurrState is most
recently updated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.1.6.1.2 |
cadSpMgtRequests OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.15.4.2.2 |
cadSpMgtRequestUpChannelIfIndexIfIndex of the upstream channel.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.15.4.2.2.1 |
cadSpMgtRequestTriggerIndexThe trigger index used to identify the trigger. A value of 0
indicates no trigger is attempted.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.2.2 |
cadSpMgtRequestNextStateThe index used to identify the next state to which the state
machine may transition to.rw Integer32 .1.3.6.1.4.1.4998.1.1.15.4.2.2.3 |
cadSpMgtRequestSNRThis object is the measured Signal/Noise ratio (in dB) for the
upstream channel. This object is applicable when the value in
cadSpMgtRequestTriggerIndex defines the trigger of type
degradation or improvement.rw TenthdB UNITS "dB" .1.3.6.1.4.1.4998.1.1.15.4.2.2.4 |
cadSpMgtRequestUFecErrorThis object is the measured percentage of uncorrectable
FEC errors for the upstream channel.
This object is applicable when the value in
cadSpMgtRequestTriggerIndex defines the trigger of type
degradation or improvement.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.2.5 |
cadSpMgtRequestFecErrorThis object is the measured percentage of FEC errors
(uncorrectable plus correctable) for the upstream channel.
This object is applicable when the value in
cadSpMgtRequestTriggerIndex defines the trigger of type
degradation or improvement.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.15.4.2.2.6 |
cadSpMgtRequestCommitThe command to execute the request when set to
true(1).
The following are reasons for rejecting an SNMP
SET to this object:
- An operation is commited for a non-existing upstream channel ID or the corresponding ifOperStatus is down(2).
- An operation is committed but cadSpMgtRequestNextState is not an existing state index in cadSpMgtStateEntry.
- An operation is committed but the value in cadSpMgtRequestTriggerIndex is non-zero and not an existing trigger index in cadSpMgtTriggerEntry.
Reading this object always returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.15.4.2.2.7 |
cadSpMgtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.15.4.3 |