CADANT-CMTS-EXPORTIMPORT-MIB
The CADANT-CMTS-EXPORTIMPORT-MIB facilitates the remote backup and restoration of MIB configuration data on Cadant C4 Cable Modem Termination Systems (CMTS) via SNMP export and import operations. This module enables the management of configuration state consistency and disaster recovery procedures by controlling the transfer of device-specific management information base objects.
Imported Objects
Objects
14 total| Object Name |
|---|
cadExportImportMibThis MIB defines object which are used to control and report on
the exporting and importing of MIB configuration data in the
Cadant C4 CMTS. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.100.1 |
cadCmtsExportImportTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.100.1.0 |
cadCmtsExportNotification NOTIFICATION-TYPE .1.3.6.1.4.1.4998.1.1.100.1.0.1 |
cadCmtsImportNotification NOTIFICATION-TYPE .1.3.6.1.4.1.4998.1.1.100.1.0.2 |
cadCmtsExportImportGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.100.1.1 |
cadCmtsExportImportFilenameThe filename to which the MIB configuration data will be written to.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.1.1.1 |
cadCmtsExportImportActionA cadCmtsExportNotification is sent when an export operation has
completed. A cadCmtsImportNotification is sent when an import
operation has completed.rw ExportImportAction .1.3.6.1.4.1.4998.1.1.100.1.1.2 |
cadCmtsExportResultThe status of the last export operation. The value of unknown
is used upon system initialization.ro ExportResult .1.3.6.1.4.1.4998.1.1.100.1.1.3 |
cadCmtsImportResultThe status of the last import operation. The value of unknown
is used upon system initialization.ro ImportResult .1.3.6.1.4.1.4998.1.1.100.1.1.4 |
cadCmtsExportImportWithLineNumsIf set to true(1) at the time when CadCmtsExportImportAction causes
output to be generated, then each line of the output will be prepended with
its line number. Note that this output cannot then be put back into the CLI
and processed. The line numbers are not valid CLI syntax.
Otherwise, if false(2), then output is normal without numbers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.1.1.5 |
cadCmtsExportImportWithDefaultsIf set to true(1) at the time when CadCmtsExportImportAction causes
output to be generated, then all configuration objects are exported,
even the ones with default values or otherwise untouched.
Otherwise, if false(2), then output is abbreviated and only includes
values which are different from their default values or are otherwise
difficult to disinguish from their default values.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.1.1.6 |
cadCmtsExportImportNestedIf set to true(1) at the time when CadCmtsExportImportAction causes
output to be generated, then output is grouped in a nested, modal style
and contains fewer characters, though a greater number of lines.
Otherwise, if false(2), then each output line is fully qualified and
capable of being put into a CLI session as-is.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.1.1.7 |
cadCmtsExportImportWithCertificatesIf set to true(1) at the time when CadCmtsExportImportAction causes
output to be generated, then output contains BPI+ certificates.
Otherwise, if false(2), then output does not contain BPI+ certificates.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.100.1.1.8 |
cadCmtsExportImportIfIndexIf specified, then only the provisioned information for the specified
interface will be exported when cadCmtsExportImportAction is set to true(1).
Only cable and fastEthernet interfaces are supported at this time.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4998.1.1.100.1.1.9 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.