CADANT-CMTS-BPI2-MIB
The CADANT-CMTS-BPI2-MIB enables monitoring and management of Cable Modem Termination System (CMTS) devices for CableLabs DOCSIS 2.0/2.1 (BPI+) security and interface status, specifically tracking authentication states, encryption keys, and MAC-layer statistics for cable modems. This vendor-specific extension of the standard DOCS-BPI2-MIB provides granular visibility into Broadband over Power Line (BPL) or Cable Broadband IP security associations and operational parameters on Cadant hardware platforms.
Imported Objects
Objects
9 total| Object Name |
|---|
cadBpi2MibCadant Bpi+ mib derived from the DOCS-BPI2-MIB MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.5.5 |
cadBpi2CmtsBaseTable SEQUENCE OF CadBpi2CmtsBaseEntry .1.3.6.1.4.1.4998.1.1.5.5.1 |
cadBpi2CmtsBaseEntry CadBpi2CmtsBaseEntry .1.3.6.1.4.1.4998.1.1.5.5.1.1 |
cadBpi2CmtsDefaultAuthLifetimeThe value of this object is the default lifetime, in seconds, the CMTS assigns to a new authorization key.rw Integer32 .1.3.6.1.4.1.4998.1.1.5.5.1.1.1 |
cadBpi2CmtsDefaultTEKLifetimeThe value of this object is the default lifetime, in seconds, the CMTS assigns to a new Traffic Encryption Key (TEK).rw Integer32 .1.3.6.1.4.1.4998.1.1.5.5.1.1.2 |
cadBpi2CmtsDefaultSelfSignedManufCertTrustThis object determines the default trust of all (new) self-signed manufacturer certificates obtained after setting the object.rw Enumeration .1.3.6.1.4.1.4998.1.1.5.5.1.1.3 |
cadBpi2CmtsCheckCertValidityPeriodsSetting this object to TRUE causes all certificates obtained thereafter to have their validity periods (and their chain's validity periods) checked against the current time of day. A FALSE setting will cause all certificates obtained thereafter to not have their validity periods (nor their chain's validity periods) checked against the current time of day.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.5.5.1.1.4 |
cadBpi2CmtsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.5.5.2 |
cadBpi2CmtsAES128EnableEnables AES-128 Cryptography Suite for BPI+ when true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.5.5.2.1 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.