CADANT-BGP-MIB
The CADANT-BGP-MIB provides enterprise-specific management of Border Gateway Protocol operations on Arris Cadant C4 routers, exposing BGP peer session states, routing table statistics, and protocol error counters for network monitoring and troubleshooting.
Imported Objects
Objects
16 total| Object Name |
|---|
cadBgpMibThe MIB module defined here represent Arris Cadant C4's enterprise specific Border Gateway Protocol MIB. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.25.9 |
cadBgpRouteMapAuxTableThis table adds Cadant specific route map parameters. SEQUENCE OF CadBgpRouteMapAuxEntry .1.3.6.1.4.1.4998.1.1.25.9.17 |
cadBgpRouteMapAuxEntryAn entry that adds Cadant specific route map parameters using the DCL bgpRouteMapTable keys. CadBgpRouteMapAuxEntry .1.3.6.1.4.1.4998.1.1.25.9.17.1 |
cadBgpRouteMapAuxRouteMapNameField containg the name of the Route Map.ro OCTET STRING .1.3.6.1.4.1.4998.1.1.25.9.17.1.1 |
cadBgpRouteMapAuxPrefixListNameField containg the name of the Prefix List associated with this Route Map. It is used to match on cadPolicyPfxListName.roobsolete OCTET STRING .1.3.6.1.4.1.4998.1.1.25.9.17.1.2 |
cadBgpRouteMapAuxPreMatchField indicates which match command is used by the route map the prefix list is tied to.obsolete BgpIpMatchType (DC-BGP-MIB) .1.3.6.1.4.1.4998.1.1.25.9.17.1.3 |
cadBgpRouteMapAuxMaAddrNameField containg the name of the Prefix List used to match the NLRI attribute against.ro OCTET STRING .1.3.6.1.4.1.4998.1.1.25.9.17.1.4 |
cadBgpRouteMapAuxMaNextNameField containg the name of the Prefix List used to match the Next Hop attributero OCTET STRING .1.3.6.1.4.1.4998.1.1.25.9.17.1.5 |
cadBgpRouteMapAuxMaSourceNameField containg the name of the Prefix List used to match the source addressro OCTET STRING .1.3.6.1.4.1.4998.1.1.25.9.17.1.6 |
cadRtmRedistAuxTableThis table adds Cadant redistribution information entries. SEQUENCE OF CadRtmRedistAuxEntry .1.3.6.1.4.1.4998.1.1.25.9.18 |
cadRtmRedistAuxEntryCadant specific auxiliary information that parallels DC-RTM Redistribution Table CadRtmRedistAuxEntry .1.3.6.1.4.1.4998.1.1.25.9.18.1 |
rtmRedistFteIndexThe HAF entity index identifying the instance of DC-RTM to which this auxiliary table entry applies. FteIndex (DC-RTM-MIB) .1.3.6.1.4.1.4998.1.1.25.9.18.1.1 |
rtmRedistEntryIdThe index of the parallel DC-RTM redistribution table entry within the DC-RTM entity. This is an arbitrarily selected identifier. Unsigned32 .1.3.6.1.4.1.4998.1.1.25.9.18.1.2 |
cadRtmRedistAuxRowStatusUsed to create and delete a cadRtmRedistAuxTable entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.9.18.1.3 |
cadRtmRedistAuxRouteMapIndexThe index of the bgpRouteMapEntry used by this route redistribution.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.25.9.18.1.4 |
cadRtmRedistAuxCommandLineMetricWhether of not metric values were set in the command linerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.25.9.18.1.5 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.