C-PRODUCT-BASE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for C-PRODUCT-BASE-MIB.
115
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
115 total| Object Name |
|---|
cardBaseTableA 6 entry card table in the shelf. SEQUENCE OF CardBaseEntry .1.3.6.1.4.1.119.2.3.14.9.7.1 |
cardBaseEntryEach card entry contains objects that refer to the
card in that entry. CardBaseEntry .1.3.6.1.4.1.119.2.3.14.9.7.1.1 |
cardSlotSlot number of the card in the shelf. The assignment of the
card slots is as follows:
slot 1 : management cpu,
slot 2 : ctx card,
slot 3 : one of the trunk cards (e.g. ds3/oc3/e3/hssi),
slot 4-6: one of the port cards (e.g. ether/cbr/qsim). INTEGER .1.3.6.1.4.1.119.2.3.14.9.7.1.1.1 |
cardTypeDbThe configured card type in the slot. It may differ from
the actual card type (cardTypeHw) in the corresponding
slot. A set request will be accepted only when one of the
following is true:
1. the value of cardTypeHw in this slot is none, or
2. the new value of cardTypeDb is the same as the
corresponding cardTypeHw.rw CardType .1.3.6.1.4.1.119.2.3.14.9.7.1.1.2 |
cardTypeHwThe actual card type in the slot.ro CardType .1.3.6.1.4.1.119.2.3.14.9.7.1.1.3 |
cardAdminStatusAdministrative status of the card. An error is returned if this
slot has been selected as the system reference clock and an
attempt is made to change this object to out-of-service. This
object does not apply to management cpu and ctx card.rw AdminStatus .1.3.6.1.4.1.119.2.3.14.9.7.1.1.4 |
cardOperStatusOperational status of the card.ro CardOperStatus .1.3.6.1.4.1.119.2.3.14.9.7.1.1.5 |
cardSerialNumberSerial number of the card.ro OCTET STRING .1.3.6.1.4.1.119.2.3.14.9.7.1.1.6 |
cardRevisionHardware revision number of the card.ro OCTET STRING .1.3.6.1.4.1.119.2.3.14.9.7.1.1.7 |
cardPartNumberPart number of the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.119.2.3.14.9.7.1.1.8 |
cardResetThis is the command to reset the card at the specified
slot number. A read request always returns 0.
Warning: Reseting card will temporarily disrupt traffic on
the specified slot number.rw Enumeration .1.3.6.1.4.1.119.2.3.14.9.7.1.1.9 |
cardShelfStateOperational shelf state of the card.ro CardShelfState .1.3.6.1.4.1.119.2.3.14.9.7.1.1.10 |
sysGenInfo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.17.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.272.4.17.1 |
sysGenInfoShelfNameName of the managed node.rw DisplayString .1.3.6.1.4.1.272.4.17.1.1 |
sysGenInfoCustomerNameName of the organization that uses the managed node.rw DisplayString .1.3.6.1.4.1.272.4.17.1.2 |
sysGenInfoPhoneNumberPhone number of the organization that uses
the managed node.rw DisplayString .1.3.6.1.4.1.272.4.17.1.3 |
sysGenInfoMaintenanceContactMaintenance contact of the managed node.rw DisplayString .1.3.6.1.4.1.272.4.17.1.4 |
sysGenInfoLocationLocation of the managed node.rw DisplayString .1.3.6.1.4.1.272.4.17.1.5 |
sysGenInfoAutoLogoutTimeThe time a TELNET or VT-100 terminal user can maintain
a session with the managed node without any keyboard
action. Unit: minuterw INTEGER .1.3.6.1.4.1.272.4.17.1.6 |
sysGenInfoPasswordPassword required to access the managed node using
VT-100 terminal or TELNET. A get request always
returns a NULL string.rw OCTET STRING .1.3.6.1.4.1.272.4.17.1.7 |
sysGenCurrentCodeReleaseFirmware revision of the current code running in the
managed node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.17.1.8 |
sysTimeAndDateTime and date maintained in the managed node.rw TimeAndDate .1.3.6.1.4.1.272.4.17.2 |
sysIpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.17.3 |
sysIpConfigLocalHost OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.17.3.1 |
sysIpConfigLocalHostCommunityNameCommunity name of the managed node. A get
request always returns a NULL string.rw DisplayString .1.3.6.1.4.1.272.4.17.3.1.1 |
sysIpConfigLocalHostIpAddressLocal host's Ethernet IP address.ro IpAddress .1.3.6.1.4.1.272.4.17.3.1.2 |
sysIpConfigLocalHostSubnetMaskLocal host's Ethernet IP subnet mask.ro IpAddress .1.3.6.1.4.1.272.4.17.3.1.3 |
sysIpConfigLocalHostMacAddressLocal host's Ethernet MAC-layer address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.272.4.17.3.1.4 |
sysIpConfigTrapGateway OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.17.3.2 |
sysIpConfigTrapGatewayIpAddressTrap gateway's IP address.rw IpAddress .1.3.6.1.4.1.272.4.17.3.2.1 |
sysIpConfigTrapGatewaySubnetMaskTrap gateway's IP subnet mask.rw IpAddress .1.3.6.1.4.1.272.4.17.3.2.2 |
sysIpConfigTrapClientTableTrap client table has 4 entries SEQUENCE OF SysIpConfigTrapClientEntry .1.3.6.1.4.1.272.4.17.3.3 |
sysIpConfigTrapClientEntryEach entry contains IP address and port number of
an SNMP manager which receives traps from the
managed node. SysIpConfigTrapClientEntry .1.3.6.1.4.1.272.4.17.3.3.1 |
sysIpConfigTrapClientIndex INTEGER .1.3.6.1.4.1.272.4.17.3.3.1.1 |
sysIpConfigTrapClientIpAddressTrap client's IP address.rw IpAddress .1.3.6.1.4.1.272.4.17.3.3.1.2 |
sysIpConfigTrapClientSubnetMaskTrap client's IP subnet mask.rw IpAddress .1.3.6.1.4.1.272.4.17.3.3.1.3 |
sysIpConfigTrapClientPortNumberTrap client's port number.rw INTEGER .1.3.6.1.4.1.272.4.17.3.3.1.4 |
sysRs232TableThis table contains 2 rows. The first row shows the physical
configuration of the port connected to a VT100 termianl. The
second row is used to configure the port which supports SLIP.
Access to the first row is read-only and access to the second
row is read-write. SEQUENCE OF SysRs232Entry .1.3.6.1.4.1.272.4.17.4 |
sysRs232EntryEach entry contains the attributes of a serial port. SysRs232Entry .1.3.6.1.4.1.272.4.17.4.1 |
sysRs232PortThe managed node has 2 serial ports: port 1 and port 2. Enumeration .1.3.6.1.4.1.272.4.17.4.1.1 |
sysRs232BaudRateBaud rate. The instance of this object in port-1
is read-only.rw Enumeration .1.3.6.1.4.1.272.4.17.4.1.2 |
sysRs232ParityParity. The instance of this object in port-1 is
read-only.rw Enumeration .1.3.6.1.4.1.272.4.17.4.1.3 |
sysRs232DataBitsNumber of data bits. The instance of this object
in port-1 is read-only.rw Enumeration .1.3.6.1.4.1.272.4.17.4.1.4 |
sysRs232StopBitsNumber of stop bits. The instance of this object
in port-1 is read-only.rw Enumeration .1.3.6.1.4.1.272.4.17.4.1.5 |
sysRefClockSystem reference clock maintained in the managed node.rw Enumeration .1.3.6.1.4.1.272.4.17.5 |
sysProductTypeSystem Product Type contain type of product.ro Enumeration .1.3.6.1.4.1.272.4.17.6 |
shelfSerialNumberSerial number of the shelf.ro OCTET STRING .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.1 |
shelfRevisionHardware revision number of the shelf.ro OCTET STRING .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.2 |
shelfPowerSupplyTableThe power supply table in the shelf. SEQUENCE OF ShelfPowerSupplyEntry .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.3 |
shelfPowerSupplyEntryInformation of the power supply in the shelf. ShelfPowerSupplyEntry .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.3.1 |
shelfPowerSupplySlotSlot number of the power supply. Enumeration .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.3.1.1 |
shelfPowerSupplyAdminStatusAdministrative status.rw AdminStatus .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.3.1.2 |
shelfPowerSupplyOperStatusOperational status for Power Supply. In AB9300/AB9100, it
doesn't support any setting value.ro Enumeration .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.3.1.3 |
shelfPartNumberPart number of the shelf.ro OCTET STRING .1.3.6.1.4.1.637.64.0.10.1.1.2.1.89.29.4 |
portBaseTableThe port information table. SEQUENCE OF PortBaseEntry .1.3.6.1.4.1.3181.10.6.1.81.1 |
portBaseEntryEach port entry contains objects that refer to the
port in that entry. PortBaseEntry .1.3.6.1.4.1.3181.10.6.1.81.1.1 |
portSlotSlot Number. This table does not have objects for
management cpu (slot #1) and ctx card (slot #2). INTEGER .1.3.6.1.4.1.3181.10.6.1.81.1.1.1 |
portNumberPort number. The number of ports in each card
depends on the type of card in that slot. Following
is a list of cards and the port range of that cards:
card type port range
ds3 1..1
ether 1..2
oc3 1..1
hssi 1..1
cbr-dsx-4 1..4
cbr-e1-4 1..4
cbr-dsx-8 1..8
cbr-e1-8 1..8
v-35-qsim 1..4
rs-422-qsim 1..4
hssi-qsim 1..1
e3 1..1 INTEGER .1.3.6.1.4.1.3181.10.6.1.81.1.1.2 |
portAdminStatusAdministrative status of the port. An error is returned if this
port has been selected as the system reference clock and an
attempt is made to change this object to out-of-service.rw AdminStatus .1.3.6.1.4.1.3181.10.6.1.81.1.1.3 |
portOperStatusOperational status of the port.ro PortOperStatus .1.3.6.1.4.1.3181.10.6.1.81.1.1.4 |
portIfIndexCurrently this object applies to the interface ports
in port cards ONLY. It is pre-assigned as following:
slot range
3 1..8
4 9..16
5 17..24
6 25..32
7 33..40
8 41..48
9 49..57ro INTEGER .1.3.6.1.4.1.3181.10.6.1.81.1.1.5 |
vcpNextAvailGlobVcSideIdThis unique value which identified the next available
virtual circuit ID. It is allowed NMS manager to get
the next available Virtual Circuit Id before created
a new row into Virtual circuit Path Table.ro INTEGER .1.3.6.1.4.1.13742.6.3.11.2 |
vcpBaseTableThe base virtual circuit table contains the common
information for both sides of circuit. SEQUENCE OF VcpBaseEntry .1.3.6.1.4.1.13742.6.3.11.3 |
vcpBaseEntryInformation of the base virtual circuit. VcpBaseEntry .1.3.6.1.4.1.13742.6.3.11.3.1 |
vcpSideAIdA unique value which identifies the SideA of circuit. INTEGER .1.3.6.1.4.1.13742.6.3.11.3.1.1 |
vcpSideBIdA unique value which identifies the SideB of circuit. INTEGER .1.3.6.1.4.1.13742.6.3.11.3.1.2 |
vcpLinkTypeVc Circuit Type indicated whether this circuit is
Regular, Multicast, Management, Unicast, leaf.rw VcpLinkType .1.3.6.1.4.1.13742.6.3.11.3.1.3 |
vcpDescriptionVc description of circuits.rw DisplayString .1.3.6.1.4.1.13742.6.3.11.3.1.4 |
vcpAdminStatusVc administrative status.rw AdminStatus .1.3.6.1.4.1.13742.6.3.11.3.1.5 |
vcpRowStatusThis object indicates the action to be taken by a set
request.rw Enumeration .1.3.6.1.4.1.13742.6.3.11.3.1.6 |
vcpSideTableThe side table contains the Side A or Side B of
circuit information. SEQUENCE OF VcpSideEntry .1.3.6.1.4.1.13742.6.3.11.4 |
vcpSideEntryInformation of the base virtual circuit. VcpSideEntry .1.3.6.1.4.1.13742.6.3.11.4.1 |
vcpSideIdunique number associated with virtual circuit. INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.1 |
vcpSideSlotSlot Number. This table does not have objects for
ctx card (slot #2) and card (slot #3).rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.2 |
vcpSidePortPort number. The number of ports in each card
depends on the type of card in that slot. Following
is a list of cards and the port range of that cards:
card type port range
mcpu 1..1
ds3 1..1
ether 1..2
oc3 1..1
hssi 1..1
cbr-dsx-4 1..4
cbr-csu-4 1..4
cbr-e1-4 1..4
cbr-dsx-8 1..8
cbr-csu-8 1..8
cbr-e1-8 1..8
v-35-qsim 1..4
rs-422-qsim 1..4
hssi-qsim 1..1
e3 1..1rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.3 |
vcpSideTransmitVpiPort card transmit vpi.rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.4 |
vcpSideTransmitVciPort card transmit vci.rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.5 |
vcpSideReceiveVpiPort card receive vpi. The value range 0..255 applies
when VPI-only translation is requested. Otherwise, its
range is 0..15. If the value of an instance of this
object is > 15, the value of the corresponding instance
of vcPortReceiveVci MUST be 0 (VPI-only translation).rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.6 |
vcpSideReceiveVciPort card receive vci. If the value of this object is 0,
VPI-only translation is requested.rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.7 |
vcpSidePriorityPriority queue is to prioritize the circuit. The
smallest number is the highest priority. The
largest number is lowest priority.rw INTEGER .1.3.6.1.4.1.13742.6.3.11.4.1.8 |
vcpSidePacketDiscardPacket Discard indicates whether this packet needs
to drop off based on the threshold.rw VcpPacketDiscard .1.3.6.1.4.1.13742.6.3.11.4.1.9 |
vcpMappingSideTableThe Mapping side table contains circuit Side information. SEQUENCE OF VcpMappingSideEntry .1.3.6.1.4.1.13742.6.3.11.5 |
vcpMappingSideEntryInformation of the base virtual circuit. VcpMappingSideEntry .1.3.6.1.4.1.13742.6.3.11.5.1 |
vcpMappingSideSlotSlot Number. This table does not have objects for
ctx card (slot #2) and card (slot #3). INTEGER .1.3.6.1.4.1.13742.6.3.11.5.1.1 |
vcpMappingSidePortPort number. The number of ports in each card
depends on the type of card in that slot. Following
is a list of cards and the port range of that cards:
card type port range
mcpu 1..1
ds3 1..1
ether 1..2
oc3 1..1
hssi 1..1
cbr-dsx-4 1..4
cbr-csu-4 1..4
cbr-e1-4 1..4
cbr-dsx-8 1..8
cbr-csu-8 1..8
cbr-e1-8 1..8
v-35-qsim 1..4
rs-422-qsim 1..4
hssi-qsim 1..1
e3 1..1 INTEGER .1.3.6.1.4.1.13742.6.3.11.5.1.2 |
vcpMappingSideAIdSideA ID is a unique number associated with virtual circuit. INTEGER .1.3.6.1.4.1.13742.6.3.11.5.1.3 |
vcpMappingSideBIdSideB ID is a unique number associated with virtual circuit. INTEGER .1.3.6.1.4.1.13742.6.3.11.5.1.4 |
vcpMappingCardTypecard Type associated with mySide of circuit.ro CardType .1.3.6.1.4.1.13742.6.3.11.5.1.5 |
vcpMappingFamCardTypeFamily Card Type associate with mySide of circuit.ro VcFamilyCardType .1.3.6.1.4.1.13742.6.3.11.5.1.6 |
vcpMappingOtherCardTypeOther Side of Card Type associate with the circuit.ro CardType .1.3.6.1.4.1.13742.6.3.11.5.1.7 |
vcpMappingOtherFamCardTypeOther Side of Family Card Type associate with the circuit.ro VcFamilyCardType .1.3.6.1.4.1.13742.6.3.11.5.1.8 |
faultClearCurrentAlarmsA set request clears all entries in the current
alarm table. A get/get-next request returns 0.rw INTEGER .1.3.6.1.4.1.33333.10.49.1 |
faultClearHistoryAlarmsA set request clears all entries in the history
alarm table. A get/get-next request returns 0.rw INTEGER .1.3.6.1.4.1.33333.10.49.2 |
faultCurrentAlarmTableCurrent alarm table. SEQUENCE OF FaultCurrentAlarmEntry .1.3.6.1.4.1.33333.10.49.3 |
faultCurrentAlarmEntryEach entry in the table contains the information of
a currently active alarm. FaultCurrentAlarmEntry .1.3.6.1.4.1.33333.10.49.3.1 |
faultCurrentAlarmTagThe tag of the alarm in the current alarm table. INTEGER .1.3.6.1.4.1.33333.10.49.3.1.1 |
faultCurrentAlarmAlarmTypeAlarm type.ro AlarmType .1.3.6.1.4.1.33333.10.49.3.1.2 |
faultCurrentAlarmSeverityAlarm severity.ro Enumeration .1.3.6.1.4.1.33333.10.49.3.1.3 |
faultCurrentAlarmCardTypeCard type of the card which caused the alarm.ro CardType .1.3.6.1.4.1.33333.10.49.3.1.4 |
faultCurrentAlarmCardNumberSlot number of the card which caused the alarm.ro INTEGER .1.3.6.1.4.1.33333.10.49.3.1.5 |
faultCurrentAlarmPortNumberThe port number of the card which caused the alarm.ro INTEGER .1.3.6.1.4.1.33333.10.49.3.1.6 |
faultCurrentAlarmSetTimeThe time when the alarm was set.ro TimeAndDate .1.3.6.1.4.1.33333.10.49.3.1.7 |
faultCurrentAlarmDescriptionA readable string which describes the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33333.10.49.3.1.8 |
faultHistoryAlarmTableHistory/Information alarm table. SEQUENCE OF FaultHistoryAlarmEntry .1.3.6.1.4.1.33333.10.49.4 |
faultHistoryAlarmEntryEach entry in the history alarm table contains either a
cleared alarm or an information alarm. FaultHistoryAlarmEntry .1.3.6.1.4.1.33333.10.49.4.1 |
faultHistoryAlarmTagThe tag of the alarm in the history alarm table. INTEGER .1.3.6.1.4.1.33333.10.49.4.1.1 |
faultHistoryAlarmAlarmTypeAlarm type.ro AlarmType .1.3.6.1.4.1.33333.10.49.4.1.2 |
faultHistoryAlarmSeveritySeverity of the alarm.ro Enumeration .1.3.6.1.4.1.33333.10.49.4.1.3 |
faultHistoryAlarmCardTypeCard type of the card which caused the alarm.ro CardType .1.3.6.1.4.1.33333.10.49.4.1.4 |
faultHistoryAlarmCardNumberSlot number of the card which caused the alarm.ro INTEGER .1.3.6.1.4.1.33333.10.49.4.1.5 |
faultHistoryAlarmPortNumberPort number of the card which caused the alarm.ro INTEGER .1.3.6.1.4.1.33333.10.49.4.1.6 |
faultHistoryAlarmSetTimeThe time when the alarm was set.ro TimeAndDate .1.3.6.1.4.1.33333.10.49.4.1.7 |
faultHistoryAlarmDescriptionA readable string which describes the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33333.10.49.4.1.8 |
faultHistoryAlarmClearTimeThe time when the alarm was cleared.ro TimeAndDate .1.3.6.1.4.1.33333.10.49.4.1.9 |