BIANCA-BRICK-ATM2-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BIANCA-BRICK-ATM2-MIB.
157
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
bintec OBJECT IDENTIFIER .1.3.6.1.4.1.272 |
RFC1213-MIB Unknown .1.3.6.1.4.1.272 |
bibo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4 |
atm OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.16 |
atmIfTableThe atmIfTable displays all available ATM capable interfaces. SEQUENCE OF AtmIfEntry .1.3.6.1.4.1.272.4.16.10 |
atmIfEntryAn interface entry containing objects at the
subnetwork layer and below for a particular
interface. AtmIfEntry .1.3.6.1.4.1.272.4.16.10.1 |
atmIfIndexThe interface index of the associated ATM hardware.ro INTEGER .1.3.6.1.4.1.272.4.16.10.1.1 |
atmIfTypeThis object contains an interface type.ro Enumeration .1.3.6.1.4.1.272.4.16.10.1.2 |
atmIfDescrShort description for this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.16.10.1.3 |
atmIfAdminStatusThis object contains the desired state of the ATM interface.rw Enumeration .1.3.6.1.4.1.272.4.16.10.1.4 |
atmIfOperStatusThe current operational state of the ATM interface.ro Enumeration .1.3.6.1.4.1.272.4.16.10.1.5 |
atmIfLastChangeThe value of sysUpTime at the time the interface entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network management subsystem, then this object contains a
zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.272.4.16.10.1.6 |
atmIfMaxTxRateThis object enables traffic shaping on the related ATM
interface. If set to zero (0) there is no shaping active.
Otherwise this variable defines the maximum amount of bits
per second to be transmitted. Note that the maximum transmit
rate is also determined by the capabilities of the ATM
hardware.rw INTEGER .1.3.6.1.4.1.272.4.16.10.1.7 |
atmIfOperModeThe current operational mode of the ATM interface.
The value atm(1) means ATM is used on the line.
The value efm(2) means ATM is used only internally
and Ethernet with HDLC framing is used on the line.ro Enumeration .1.3.6.1.4.1.272.4.16.10.1.8 |
atmIfInPktsThe number of reassembled received packets.ro INTEGER .1.3.6.1.4.1.272.4.16.10.1.22 |
atmIfOutPktsThis number of transmitted packets.ro INTEGER .1.3.6.1.4.1.272.4.16.10.1.23 |
atmIfRxSpeedThis object contains the receive interface speed.ro INTEGER .1.3.6.1.4.1.272.4.16.10.1.24 |
atmIfTxSpeedThis object contains the transmit interface speed.ro INTEGER .1.3.6.1.4.1.272.4.16.10.1.25 |
atmIfInOctetsThe total number of octets received on the interface,
including framing characters.ro Counter .1.3.6.1.4.1.272.4.16.10.1.26 |
atmIfInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.ro Counter .1.3.6.1.4.1.272.4.16.10.1.27 |
atmIfInErrorsThe number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.ro Counter .1.3.6.1.4.1.272.4.16.10.1.28 |
atmIfOutOctetsThe total number of octets transmitted out of the interface,
including framing characters.ro Counter .1.3.6.1.4.1.272.4.16.10.1.29 |
atmIfOutDiscardsThe number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.ro Counter .1.3.6.1.4.1.272.4.16.10.1.30 |
atmIfOutErrorsThe number of outbound packets that could not be transmitted
because of errors.ro Counter .1.3.6.1.4.1.272.4.16.10.1.31 |
atmVpcTableA table of status and parameter information on the virtual
path connections which cross this UNI. There is one entry in
this table for each permanent virtual path connection.
This is the lite version of ATM-FORUM-MIB DEFINITIONS SEQUENCE OF AtmVpcEntry .1.3.6.1.4.1.272.4.16.11 |
atmVpcEntryAn entry in the table, containing information about a
particular virtual path connection. AtmVpcEntry .1.3.6.1.4.1.272.4.16.11.1 |
atmVpcPortIndexThe interface index of the associated ATM hardware.ro INTEGER .1.3.6.1.4.1.272.4.16.11.1.1 |
atmVpcVpiThe VPI value of this Virtual Path Connection.ro INTEGER .1.3.6.1.4.1.272.4.16.11.1.2 |
atmVpcOperStatusThe present actual operational status of the VPC. A value of
end2endUp(2) or end2endDown(3) would be used if the end-to-end
status is known. If only local status information is available,
a value of localUpEnd2endUnknown(4) or localDown(5) would
be used.ro Enumeration .1.3.6.1.4.1.272.4.16.11.1.3 |
atmVccTableA table of status and parameter information on the virtual
channel connections which are visible at this UNI. There is
one entry in this table for each permanent virtual channel
connection, including reserved VCCs that are supported;
e.g., signalling, OAM flows, and ILMI, but not unassigned
cells. This is the lite version of ATM-FORUM-MIB DEFINITIONS SEQUENCE OF AtmVccEntry .1.3.6.1.4.1.272.4.16.12 |
atmVccEntryAn entry in the table, containing information about a
particular virtual channel connection. AtmVccEntry .1.3.6.1.4.1.272.4.16.12.1 |
atmVccPortIndexThe interface index of the associated ATM hardware.ro INTEGER .1.3.6.1.4.1.272.4.16.12.1.1 |
atmVccVpiThe VPI value of this Virtual Channel Connection.ro INTEGER .1.3.6.1.4.1.272.4.16.12.1.2 |
atmVccVciThe VCI value of this Virtual Channel Connection.ro INTEGER .1.3.6.1.4.1.272.4.16.12.1.3 |
atmVccOperStatusThe present actual operational status of the VCC. A value
of end2endUp(2) or end2endUp(3) is used if the end-to-end
status is known. If only local status is known a value of
localUpEnd2endUnknown(4) or localDown(5) is used.ro Enumeration .1.3.6.1.4.1.272.4.16.12.1.4 |
atmOamTableThis tables contains all OAM configuration parameters. SEQUENCE OF AtmOamEntry .1.3.6.1.4.1.272.4.16.13 |
atmOamEntry AtmOamEntry .1.3.6.1.4.1.272.4.16.13.1 |
atmOamAtmIfIndexThe interface index of the associated ATM hardware.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.1 |
atmOamVpiThe VPI value of this Virtual Path/Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.2 |
atmOamVciThe VCI value of this Virtual Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.3 |
atmOamFlowLevelThe OAM hierarchical flow levels : VC (F5) or VP (F4).rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.4 |
atmOamLoopbackEnd2EndIndicates wether OAM loopback is enabled onto the end-to-end
connection.rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.5 |
atmOamLoopbackSegmentIndicates wether active OAM loopback is enabled onto the
segment connection.rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.6 |
atmOamLoopbackEnd2EndIntervalOAM loopback transmit interval (in seconds) for end-to-end
context.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.7 |
atmOamLoopbackSegmentIntervalOAM loopback transmit interval (in seconds) for segment
context.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.8 |
atmOamLoopbackEnd2EndMaxPendingSpecifies the maximum number of outstanding OAM loopback
responses after which the associated F4/F5 instance will
be set into the end-to-end operational down status.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.9 |
atmOamLoopbackSegmentMaxPendingSpecifies the maximum number of outstanding OAM loopback
responses after which the associated F4/F5 instance will
be set into the segment operational down status.rw INTEGER .1.3.6.1.4.1.272.4.16.13.1.10 |
atmOamCCEnd2EndActivationDetermines wether OAM continuity check activation request
will be activated and/or accepted for the associated
end-to-end connection.
If set to passive(1) or both(3) CC activation requests
will be confirmed. If set to active(2) or both CC will
be requested. If set to no-negotiation(4) - depending on
the settings in atmOamCCEnd2EndDirection - CC cells will
be send and/or expected periodically without any previous
CC activation negotiation. If set to none(5) neither
CC activation will be requested/confirmed nor any CC
cells will be generated/expected.rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.11 |
atmOamCCSegmentActivationDetermines wether OAM continuity check activation request
will be activated and/or accepted for the associated
segment connection.
If set to passive(1) or both(3) CC activation requests
will be confirmed. If set to active(2) or both CC will
be requested. If set to no-negotiation(4) - depending on
the settings in atmOamCCSegmentDirection - CC cells will
be send and/or expected periodically without any previous
CC activation negotiation. If set to none(5) neither
CC activation will be requested/confirmed nor any CC
cells will be generated/expected.rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.12 |
atmOamCCEnd2EndDirectionDetermines OAM continuity check direction (for end-to-end).
If set to sink(1) CC cells will be received only, if set to
source(2) CC cells will be generated periodically, if set to
both(3) CC cells will be received from the source as well
as send to the sink.rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.13 |
atmOamCCSegmentDirectionDetermines OAM continuity check direction (for segment).
If set to sink(1) CC cells will be received only, if set to
source(2) CC cells will be generated periodically, if set to
both(3) CC cells will be received from the source as well
as send to the sink.rw Enumeration .1.3.6.1.4.1.272.4.16.13.1.14 |
atmOamStatTableThis tables displays all used VCs. SEQUENCE OF AtmOamStatEntry .1.3.6.1.4.1.272.4.16.14 |
atmOamStatEntry AtmOamStatEntry .1.3.6.1.4.1.272.4.16.14.1 |
atmOamStatAtmIfIndexThe interface index of the associated ATM hardware.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.1 |
atmOamStatVpiThe VPI value of this Virtual Path Connection.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.2 |
atmOamStatVciThe VCI value of this Virtual Channel Connection.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.3 |
atmOamStatFlowTypeThe OAM hierarchical flow levels: see ITU I.610ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.4 |
atmOamStatLoopbackTxCellsThe number of OAM loopback cells that have been sent
to the target in this sequence.ro Counter .1.3.6.1.4.1.272.4.16.14.1.6 |
atmOamStatLoopbackRxCellsThe number of OAM loopback cells that have been received
from the target in this sequence.ro Counter .1.3.6.1.4.1.272.4.16.14.1.7 |
atmOamStatLoopbackPendingThe number of currently outstanding OAM loopback responses.ro Counter .1.3.6.1.4.1.272.4.16.14.1.8 |
atmOamStatLoopbackCorrThe correlation of the last sent loopback message.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.9 |
atmOamStatAisStateThe AIS state is set to on(2) after receiving an AIS cell
or detection of LOC (Loss of Continuity). The Ais state is
set to off(1) either when receiving user cells
(same VCC context) or via timeout.ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.10 |
atmOamStatAisTxCellsThe number of OAM alarm indication signal (AIS) cells
that have been transmitted since last change of AisState.ro Counter .1.3.6.1.4.1.272.4.16.14.1.11 |
atmOamStatAisRxCellsThe number of OAM alarm indication signal (AIS) cells
that have been received since last change of AisState.ro Counter .1.3.6.1.4.1.272.4.16.14.1.12 |
atmOamStatTotalAisTxCellsThe total number of OAM alarm indication signal (AIS) cells
that have been transmitted.ro Counter .1.3.6.1.4.1.272.4.16.14.1.13 |
atmOamStatTotalAisRxCellsThe total number of OAM alarm indication signal (AIS) cells
that have been received.ro Counter .1.3.6.1.4.1.272.4.16.14.1.14 |
atmOamStatRdiStateThe RDI state is set to on(2) after receiving a RDI cell.
The RDI state is to off(1) via timeout.ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.15 |
atmOamStatRdiTxCellsThe number of OAM remote defect indication (RDI) cells
that have been transmitted since last change of RdiState.ro Counter .1.3.6.1.4.1.272.4.16.14.1.16 |
atmOamStatRdiRxCellsThe number of OAM remote defect indication (RDI) cells
that have been received since last change of RdiState.ro Counter .1.3.6.1.4.1.272.4.16.14.1.17 |
atmOamStatTotalRdiTxCellsThe totoal number of OAM remote defect indication (RDI) cells
that have been transmitted.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.18 |
atmOamStatTotalRdiRxCellsThe total number of OAM remote defect indication (RDI) cells
that have been received.ro Counter .1.3.6.1.4.1.272.4.16.14.1.19 |
atmOamStatCCActivatorStateThe status of the initiated CC negotiation, inactive(1)
is the initial status, wait-act-con(2) is set after
sending an CC activation request, active(3) is reached
after receiving the CC activation confirmation whereas
wait-deact-con(4) is used to indicate awaiting the
CC deactivation confirmation.ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.20 |
atmOamStatCCActivatorDirectionThe direction of action indicated by a received CC activation
confirmation, source(1) correlates with 'A-B', sink(2) with
'B-A' and both(3) with 'A-B' and 'B-A'.ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.21 |
atmOamStatCCActivatorCorrThe correlation of the last CC activation message sent
to the responder.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.22 |
atmOamStatCCResponderStateThe status of the passive CC negotiation, inactive(1)
is the initial status, active(3) is reached after receiving
an CC activation request whereas wait-deact-con(4) is used
to indicate awaiting the CC deactivation confirmation.ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.23 |
atmOamStatCCResponderDirectionThe direction of action indicated by a received CC activation
request, source(1) correlates with 'B-A', sink(2) with
'A-B' and both(3) with 'A-B' and 'B-A'.ro Enumeration .1.3.6.1.4.1.272.4.16.14.1.24 |
atmOamStatCCResponderCorrThe correlation of the received CC activation message.ro INTEGER .1.3.6.1.4.1.272.4.16.14.1.25 |
atmOamStatCCTxCellsThe number of OAM continuity check cells
that have been sent to the target in this sequence.ro Counter .1.3.6.1.4.1.272.4.16.14.1.26 |
atmOamStatCCRxCellsThe number of OAM continuity check cells
that have been received from the target in this sequence.ro Counter .1.3.6.1.4.1.272.4.16.14.1.27 |
ethoaPvcTableThe ethoaPvcTable displays all virtual ethernets defined for
a VCI/VPI on a specified hardware. SEQUENCE OF EthoaPvcEntry .1.3.6.1.4.1.272.4.16.15 |
ethoaPvcEntry EthoaPvcEntry .1.3.6.1.4.1.272.4.16.15.1 |
ethoaPvcIfIndexThis object contains an interface index and assigns the
row to an entry in ifTable. When creating new entries
in the table, the value of this object shall be set to 0.
The next free ifIndex value is than allocated and assigned
to the object. At the same time a new interface is created
in the IfTable.ro INTEGER .1.3.6.1.4.1.272.4.16.15.1.1 |
ethoaPvcDescrShort description of the configured PVCrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.16.15.1.2 |
ethoaPvcAtmIfIndexThe Index to the ATM hardware.rw INTEGER .1.3.6.1.4.1.272.4.16.15.1.3 |
ethoaPvcVpiThe VPI value of this Virtual Path Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.15.1.4 |
ethoaPvcVciThe VCI value of this Virtual Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.15.1.5 |
ethoaPvcEncapsulationThis values decides whether frames are send without FCS(1),
with FCS(2) or wether VC multiplexing is used.rw Enumeration .1.3.6.1.4.1.272.4.16.15.1.6 |
ethoaPvcPhysAddressThe MAC-Address used for the virtual interface.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.272.4.16.15.1.7 |
rpoaPvcTableThis table configures Vpi/Vci for raw protocols
(IP, IPX, etc.) SEQUENCE OF RpoaPvcEntry .1.3.6.1.4.1.272.4.16.16 |
rpoaPvcEntry RpoaPvcEntry .1.3.6.1.4.1.272.4.16.16.1 |
rpoaPvcIfIndexThis object contains an interface index and assigns the
row to an entry in ifTable. When creating new entries
in the table, the value of this object shall be set to 0.
The next free ifIndex value is than allocated and assigned
to the object. At the same time a new interface is created
in the IfTable.ro INTEGER .1.3.6.1.4.1.272.4.16.16.1.1 |
rpoaPvcDescrShort description of the configured PVCrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.16.16.1.2 |
rpoaPvcAtmIfIndexThe Index to the ATM hardware.rw INTEGER .1.3.6.1.4.1.272.4.16.16.1.3 |
rpoaPvcVpiThe VPI value of this Virtual Path Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.16.1.4 |
rpoaPvcVciThe VCI value of this Virtual Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.16.1.5 |
rpoaPvcEncapsulationThis values decides whether frames are send codes
with LLC 0xAA 0xAA (non-ISO), LLC 0xFE 0xFE (ISO)
or wether VC multiplexing is used.rw Enumeration .1.3.6.1.4.1.272.4.16.16.1.6 |
pppoaPvcTableThis table configures Vpi/Vci for PPP oaver AAL5 (PPPoA)
permanent and on-demand sessions. SEQUENCE OF PppoaPvcEntry .1.3.6.1.4.1.272.4.16.17 |
pppoaPvcEntry PppoaPvcEntry .1.3.6.1.4.1.272.4.16.17.1 |
pppoaPvcIfIndexThis object contains an interface index and refers to an
entry in ifTable. When creating new entries in the table,
the next free ifIndex value is than allocated and assigned
to the object. At the same time a new interface is created
in the IfTable with that very index.ro INTEGER .1.3.6.1.4.1.272.4.16.17.1.1 |
pppoaPvcDescrShort description of the configured PVCrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.16.17.1.2 |
pppoaPvcAtmIfIndexThe Index to the ATM hardware.rw INTEGER .1.3.6.1.4.1.272.4.16.17.1.3 |
pppoaPvcVpiThe VPI value of this Virtual Path Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.17.1.4 |
pppoaPvcVciThe VCI value of this Virtual Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.17.1.5 |
pppoaPvcEncapsulationThis value decides whether VC multiplexing or
LLC encapsulation is used.rw Enumeration .1.3.6.1.4.1.272.4.16.17.1.6 |
pppoaPvcClientTypeThis variable defines whether the PPP over AAL5 session
will be established permanent(1) or initiated on-demand(2).rw Enumeration .1.3.6.1.4.1.272.4.16.17.1.7 |
atmQosVccTableThis table provides QoS information for each active ATM VC on
the related ATM interface SEQUENCE OF AtmQosVccEntry .1.3.6.1.4.1.272.4.16.19 |
atmQosVccEntryAn entry in the table, containing ATM QoS parameters about a
particular virtual connection. AtmQosVccEntry .1.3.6.1.4.1.272.4.16.19.1 |
atmQosVccAtmIfIndexThe interface index of the associated ATM hardware.rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.1 |
atmQosVccVpiThe VPI value of this Virtual Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.2 |
atmQosVccVciThe VCI value of this Virtual Channel Connection.rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.3 |
atmQosVccServiceThe ATM service category of this virtual circuit connection:
cbr
vbr
vbr2
vbr3 VBR1 + Best Effort
vbr-rt real-time
vbr2-rt real-time
vbr3-rt real-time
ubr Best Effort
ubr2 Best Effort
abr
deleterw Enumeration .1.3.6.1.4.1.272.4.16.19.1.4 |
atmQosVccOutPcrOutput Peak Cell Rate (PCR) in bps.rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.5 |
atmQosVccOutScrOutput Sustained Cell Rate (SCR) in bps.rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.6 |
atmQosVccOutMbsOutput Maximum Burst Size (MBS) in Bytes, only for
atmQosVccService vbr-rt(2) and vbr-nrt(3) (ATM service
service category VBR).rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.7 |
atmQosVccOutMcrOutput Minimum Cell Rate (MCR) in bps for connection with
vbr-nrt(3).rw INTEGER .1.3.6.1.4.1.272.4.16.19.1.8 |
atmAturPerfDataTable SEQUENCE OF AtmAturPerfDataEntry .1.3.6.1.4.1.272.4.16.20 |
atmAturPerfDataEntryAn entry in atmAturPerfDataTable. AtmAturPerfDataEntry .1.3.6.1.4.1.272.4.16.20.1 |
atmAturPerfIfIndexSpecifies the ATM interface index.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.1 |
atmAturPerfIdleCellsThe number of ATM idle cells.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.2 |
atmAturPerfDataCellsThe number of ATM data cells.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.3 |
atmAturPerfLcdsCount of the number of Loss of Cell Delineation failures since
agent reset.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.4 |
atmAturPerfHecsCount of the number of Header Error Check failures since
agent reset.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.5 |
atmAturPerfCurr15MinTimeElapsedTotal elapsed seconds in this interval.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.11 |
atmAturPerfCurr15MinIdleCellsThe number of ATM idle cells in the mandatory 15 minute interval.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.12 |
atmAturPerfCurr15MinDataCellsThe number of ATM data cells in the mandatory 15 minute interval.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.13 |
atmAturPerfCurr15MinLcdsCount of seconds in the mandatory 15 minute interval
when there was Loss of Cell Delineation.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.14 |
atmAturPerfCurr15MinHecsCount of seconds in the mandatory 15 minute interval
when there was Header Error Check failures.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.15 |
atmAturPerfCurr1DayTimeElapsedNumber of seconds that have elapsed since the
beginning of the mandatory 1-day interval.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.18 |
atmAturPerfCurr1DayIdleCellsThe number of ATM idle cells during the mandatory day as measured
by atmAturPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.19 |
atmAturPerfCurr1DayDataCellsThe number of ATM data cells during the mandatory day as measured
by atmAturPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.20 |
atmAturPerfCurr1DayLcdsCount of the number of seconds when there was Loss
of Cell Delineation during the mandatory day as measured
by atmAturPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.21 |
atmAturPerfCurr1DayHecsCount of the number of seconds when there was Header
Error Check failures during the mandatory day as measured
by atmAturPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.22 |
atmAturPerfPrev1DayIdleCellsThe number of ATM idle cells within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.26 |
atmAturPerfPrev1DayDataCellsThe number of ATM data cells within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.27 |
atmAturPerfPrev1DayLcdsCount of seconds in the interval when there was
Loss of Cell Delineation within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.28 |
atmAturPerfPrev1DayHecsCount of seconds in the interval when there was
Header Error Check within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.20.1.29 |
atmAtucPerfDataTable SEQUENCE OF AtmAtucPerfDataEntry .1.3.6.1.4.1.272.4.16.21 |
atmAtucPerfDataEntryAn entry in atmAtucPerfDataTable. AtmAtucPerfDataEntry .1.3.6.1.4.1.272.4.16.21.1 |
atmAtucPerfIfIndexSpecifies the ATM interface index.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.1 |
atmAtucPerfIdleCellsThe number of ATM idle cells.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.2 |
atmAtucPerfDataCellsThe number of ATM data cells.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.3 |
atmAtucPerfLcdsCount of the number of Loss of Cell Delineation failures since
agent reset.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.4 |
atmAtucPerfHecsCount of the number of Header Error Check failures since
agent reset.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.5 |
atmAtucPerfCurr15MinTimeElapsedTotal elapsed seconds in this interval.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.11 |
atmAtucPerfCurr15MinIdleCellsThe number of ATM idle cells in the mandatory 15 minute interval.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.12 |
atmAtucPerfCurr15MinDataCellsThe number of ATM data cells in the mandatory 15 minute interval.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.13 |
atmAtucPerfCurr15MinLcdsCount of seconds in the mandatory 15 minute interval
when there was Loss of Cell Delineation.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.14 |
atmAtucPerfCurr15MinHecsCount of seconds in the mandatory 15 minute interval
when there was Header Error Check failures.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.15 |
atmAtucPerfCurr1DayTimeElapsedNumber of seconds that have elapsed since the
beginning of the mandatory 1-day interval.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.18 |
atmAtucPerfCurr1DayIdleCellsThe number of ATM idle cells during the mandatory day as measured
by atmAtucPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.19 |
atmAtucPerfCurr1DayDataCellsThe number of ATM data cells during the mandatory day as measured
by atmAtucPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.20 |
atmAtucPerfCurr1DayLcdsCount of the number of seconds when there was Loss
of Cell Delineation during the mandatory day as measured
by atmAtucPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.21 |
atmAtucPerfCurr1DayHecsCount of the number of seconds when there was Header
Error Check failures during the mandatory day as measured
by atmAtucPerfCurr1DayTimeElapsed.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.22 |
atmAtucPerfPrev1DayIdleCellsThe number of ATM idle cells within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.26 |
atmAtucPerfPrev1DayDataCellsThe number of ATM data cells within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.27 |
atmAtucPerfPrev1DayLcdsCount of seconds in the interval when there was
Loss of Cell Delineation within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.28 |
atmAtucPerfPrev1DayHecsCount of seconds in the interval when there was
Header Error Check within the most recent previous
1-day period.ro INTEGER .1.3.6.1.4.1.272.4.16.21.1.29 |