BIANCA-BOX-PABX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BIANCA-BOX-PABX-MIB.
147
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
147 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
SNMPv2-TC Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
bintec OBJECT IDENTIFIER .1.3.6.1.4.1.272 |
bibo OBJECT IDENTIFIER .1.3.6.1.4.1.272.4 |
pabx OBJECT IDENTIFIER .1.3.6.1.4.1.272.4.20 |
pabxUserTableThe pabxUserTable contains information about the pabx users.
CAPI and TAPI users must authenticate to the system by means
of user name and password, before active or passive
connections may be established. The default configuration
defines a user named <default> with all permissions. This
user will also be used by old CAPI applications which are
not able to select a user. Please note, that the password
for the user <default> must be empty in this case.
Entries in this table can be deleted by setting
the object pabxUserTapiMon to the value <delete>. SEQUENCE OF PabxUserEntry .1.3.6.1.4.1.272.4.20.1 |
pabxUserEntry PabxUserEntry .1.3.6.1.4.1.272.4.20.1.1 |
pabxUserNameThe name of the user.rw DisplayString .1.3.6.1.4.1.272.4.20.1.1.1 |
pabxUserPasswordThe password for the user.rw DisplayString .1.3.6.1.4.1.272.4.20.1.1.2 |
pabxUserTapiMonAllow or deny monitoring of call activity with TAPI
or delete entry.rw Enumeration .1.3.6.1.4.1.272.4.20.1.1.3 |
pabxUserTapiCtrlAllow or deny controlling of calls for the terminal belonging
to the user with TAPI.rw Enumeration .1.3.6.1.4.1.272.4.20.1.1.4 |
pabxUserTapiMediaAllow or deny the usage of TAPI media streams.rw Enumeration .1.3.6.1.4.1.272.4.20.1.1.5 |
pabxUserCapiAllow or deny the usage of CAPI.rw Enumeration .1.3.6.1.4.1.272.4.20.1.1.6 |
pabxUserIdThe user id uniquely identifies a user and is now used as
reference to that user in other tables instead of her name.
The id 0 has the meaning 'no special user'.rw INTEGER .1.3.6.1.4.1.272.4.20.1.1.7 |
pabxUserPINThe PIN is the personal identification number that is needed
for authorisation during telephone based configurations.
It consists solely of digits and must be between 4 and 9
characters long.
Default Value is '0000'.rw DisplayString .1.3.6.1.4.1.272.4.20.1.1.8 |
pabxUserPrimGroupIdPrimGroupId is the primary group identification number for
that user. It serves only for configuration purposes so that
all newly created extensions for a terminal that user is
primary user of, will automatically become member in that
group. The default value is 0.rw INTEGER .1.3.6.1.4.1.272.4.20.1.1.9 |
pabxTrunkTableThis table contains an entry for each trunk-line (or
central office line) connecting the system to an outside
network.
Entries are deleted from this table by setting the object
pabxTrunkProtocol to the value <delete>. SEQUENCE OF PabxTrunkEntry .1.3.6.1.4.1.272.4.20.2 |
pabxTrunkEntry PabxTrunkEntry .1.3.6.1.4.1.272.4.20.2.1 |
pabxTrunkNumberThe object pabxTrunkNumber ranges from 0..31 and specifies
a unique identification for the trunk line.rw INTEGER .1.3.6.1.4.1.272.4.20.2.1.1 |
pabxTrunkDescrDescription text for the trunk-line. This object
is for information only and not otherwise being
used by the system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.2.1.2 |
pabxTrunkSlotThis object specifies the number of the physical slot
the trunk-line is leading to.rw INTEGER .1.3.6.1.4.1.272.4.20.2.1.3 |
pabxTrunkUnitThis object specifies the physical unit in the slot
specified by pabxTrunkSlot. When there is only one
unit in the slot, the unitnumber has to be set to 0.rw INTEGER .1.3.6.1.4.1.272.4.20.2.1.4 |
pabxTrunkProtocolThis object specifies the protocol to be used on the
trunk-line. Currently only dss1 is available.rw Enumeration .1.3.6.1.4.1.272.4.20.2.1.5 |
pabxTrunkConfigThis object specifies, whether the trunk line is running
in point-to-point or point-to-multipoint configuration.rw Enumeration .1.3.6.1.4.1.272.4.20.2.1.6 |
pabxTrunkTeiProcThis object specifies the TEI procedure to be used with the
trunk-line. The procedure may be either <automatic> or
<fixed>. In the latter case, the TEI value has to be
specified in the object pabxTrunkTeiValuerw Enumeration .1.3.6.1.4.1.272.4.20.2.1.7 |
pabxTrunkTeiValueThis object specifies the TEI value to be used for
fixed TEI configurations and is ignored in automatic
TEI configurations.rw INTEGER .1.3.6.1.4.1.272.4.20.2.1.8 |
pabxTrunkCountryCodeThis object specifies the country code of the trunk-line.
This information has to be specified in point-to-point
configurations, because the country code has to be skipped
in the destination address of incoming calls in order to
isolate the local extension part.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.2.1.9 |
pabxTrunkAreaCodeThis object specifies the area code of the trunk-line.
This information has to be specified in point-to-point
configurations, because the area code has to be skipped
in the destination address of incoming calls in order to
isolate the local extension part.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.2.1.10 |
pabxTrunkSubscriberNoThis object specifies the subscriber number of the trunk-line.
This information has to be specified in point-to-point
configurations, because the subscriber number has to be skipped
in the destination address of incoming calls in order to
isolate the local extension part.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.2.1.11 |
pabxTrunkExtensionThis object specifies the extension number of the trunk-line.
This information has to be specified in point-to-point
configurations, because the extension number has to be skipped
in the destination address of incoming calls in order to
isolate the local extension part.
Please note, that this object shall be empty, when connected
to a normal central office line.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.2.1.12 |
pabxTrunkTypeThe trunk type identifies the purpose of an ISDN interface.
Normal external trunks are identified with type 'external'.
When cascading trunks one side must behave as network side
and, hence, a trunk entry must be created for it, despite
of operating in NT (actually NT or LTS) mode.
This is achieved by creating a trunk of type 'internal'.
Internal trunks are always point to point type interfaces.
Type 'external' is assumed by default.rw Enumeration .1.3.6.1.4.1.272.4.20.2.1.13 |
pabxTrunkL2ModeThe TrunkL2Mode specifies the mode layer 2 is to operate
in. To be able to use leased lines as well as back to back
connections to link two machines, layer 2 mode must be
configurable independently from layer 1 mode.
If mode is set to auto(1), layer 2 mode is derived from
physical configuration of interface (NT/TE). Settings te(2)
and nt(3) force the respective configuration.
By default mode is set to 'auto'.rw Enumeration .1.3.6.1.4.1.272.4.20.2.1.14 |
pabxTrunkPrefixTableThis table specifies escape codes, that may be used to
access the available trunk-lines. Initially, the prefix
<0> will be defined to use any trunk line in the
system.
Please note, that this table is only used, when
The global object pabxLocalPrefix is set to an
empty string.
Entries in this table are deleted by setting the object
pabxTrunkPrefixStatus to the value <delete> SEQUENCE OF PabxTrunkPrefixEntry .1.3.6.1.4.1.272.4.20.3 |
pabxTrunkPrefixEntry PabxTrunkPrefixEntry .1.3.6.1.4.1.272.4.20.3.1 |
pabxTrunkPrefixPrefixThis object specifies a prefix used to access (a subset of)
the available trunk-lines. It's value is a string consisting
of the dialable digits 0..9, * and #.rw DisplayString .1.3.6.1.4.1.272.4.20.3.1.1 |
pabxTrunkPrefixTrunkMaskThis object is a bit mask consisting of bit 0 to bit 31.
Each bit corresponds to the trunk-line index with the
same number (Bit 0 <-> Number 0 ...). The whole mask
specifies the set of trunk lines to be used with the
trunk-prefix.rw BitValue .1.3.6.1.4.1.272.4.20.3.1.2 |
pabxTrunkPrefixStatusThis object specifies the status of the trunk-prefix.
When set to valid, the trunk prefix will be used normally,
when set to invalid, the prefix will not be used and
when set to delete, the table-entry will be deleted.rw Enumeration .1.3.6.1.4.1.272.4.20.3.1.3 |
pabxTrunkPrefixStripOnOutgoingThis object specifies handling of trunk-prefix on outgoing
calls:
When set to enable (by default) the trunk prefix will be
stripped on outgoing calls, what must be set for external
trunks (otherwise a wrong called party number would be
passed on).
When set to disable, the prefix will remain in the called
party number, allowing a distributed PABX via internal
trunks.rw Enumeration .1.3.6.1.4.1.272.4.20.3.1.4 |
pabxTrunkPrefixPrependOnIncomingThis object specifies handling of trunk-prefix on incoming
calls:
When set to enable (by default) the trunk prefix will be
appended to the calling party number on incoming calls,
what must be set for external trunks (otherwise a wrong
calling party number would be provided, hence leading to the
calling party number being unusable for a call back).
When set to disable, no prefix will be prepended to the
calling party number, nedded for a distributed PABX via
internal trunks.rw Enumeration .1.3.6.1.4.1.272.4.20.3.1.5 |
pabxExtensionTableThis table defines the local numbers (extensions), that
shall be used within PABX and assigns an identifier to it.
Besides the extension is assigned to a terminal and user
via apropriate identifiers and to either a physical or
a logical destination. The items pabxExtSlot and pabxExtUnit
moved to the terminal table as every extension must be
associated with a terminal and, moreover, a terminal is
always as a whole physically attached to a slot and unit.
Also pabxExtUser is no longer valid, because the associated
user is now refered to via the pabxExtUserId, avoiding some
possible configuration faults.
Rows are deleted from the table by setting the object
pabxExtDestination to the value <delete>. SEQUENCE OF PabxExtensionEntry .1.3.6.1.4.1.272.4.20.4 |
pabxExtensionEntry PabxExtensionEntry .1.3.6.1.4.1.272.4.20.4.1 |
pabxExtExtensionThis object contains the extension, which is a dialable
string consisting of the digits 0..9, * and #.rw DisplayString .1.3.6.1.4.1.272.4.20.4.1.1 |
pabxExtTypeSpecifies the call types, for which the entry shall be valid.rw Enumeration .1.3.6.1.4.1.272.4.20.4.1.2 |
pabxExtIpAddrSpecifies the ip-address, to which the call shall be routed
if pabxExtDestination is set to internet-telephony.rw IpAddress .1.3.6.1.4.1.272.4.20.4.1.6 |
pabxExtEAZThe EAZ is to be used by 1TR6-based applications such as
CAPI 1.1. and is only valid if the object
pabxExtDestination is set to application.rw DisplayString .1.3.6.1.4.1.272.4.20.4.1.8 |
pabxExtLayer1ProtThe layer1 protocol to be used for multiprotocol-routing
(incoming calls only).rw Enumeration .1.3.6.1.4.1.272.4.20.4.1.9 |
pabxExtIfIndexThe interface index of the MPR interface to be used for the
call. This object is valid for routing only.rw INTEGER .1.3.6.1.4.1.272.4.20.4.1.10 |
pabxExtIdThe id uniquely identifies an extension may be within the
range from 0 to 2147483647. This id is used to refer to that
extension from other tables. Id 0 has the special meaning,
that the PABX shall choose a valid one.rw INTEGER .1.3.6.1.4.1.272.4.20.4.1.11 |
pabxExtUserIdThis identificator refers to the user the extension is
associated with. Its default value is 0 meaning no particular
user.rw INTEGER .1.3.6.1.4.1.272.4.20.4.1.12 |
pabxExtTermIdThis identificator refers to the terminal the extension is
associated with. Its value must be a valid identificator,
i.e. there must be a terminal with the given id. The special
number -1 is used for specifying that the extension is a
group extension.rw INTEGER .1.3.6.1.4.1.272.4.20.4.1.13 |
pabxExtDefaultExtFlagThis value specifies whether the extension should be used as a default
extension (for outgoing calls) for the associated terminal. The flag to
be set currently only makes sense for physical analog terminals.
The case that this flag is yes(1) for more than one extension per terminal
is considered a configuration error. Which extension will be used in that
case depends on the order in which extensions are configured
(automatically at system start-up) and, hence, is undefined.rw Enumeration .1.3.6.1.4.1.272.4.20.4.1.14 |
pabxExtPresentationNrThis field allows for specifying an extension that will be presented to
externally called partners instead of the actual calling number. Hence
it allows to use a group extension so that the called partner does only
see the extension she should use for call back if necessary, rather than
the extension within the group.
Default value is the empty string meaning that no mapping shall take
place.rw DisplayString .1.3.6.1.4.1.272.4.20.4.1.15 |
pabxExtOutsideCallSeqSet the ringing sequence for incoming calls from outsiderw Enumeration .1.3.6.1.4.1.272.4.20.4.1.16 |
pabxExtInsideCallSeqSet the ringing sequence for incoming calls inside the PABX.rw Enumeration .1.3.6.1.4.1.272.4.20.4.1.17 |
pabxExtPresentationFlagSpecify when the presentation number should take effect.
By default its value is 'off' defining the actual extension
is to be used.
If presentation number shall be used only on internal calls
ExtPresentation must be set to 'internal'.
Analogous to the last, value 'external' is for use on
external calls.
The last value 'on' specifies that the presentation number
is to be used in any case.rw Enumeration .1.3.6.1.4.1.272.4.20.4.1.18 |
pabxExtProfileIdProfileId holds an id specifying an applying profile entry in
pabx profile table.
If set to 0 no profile applies as 0 is not a valid id for
profiles. In that case terminal profile applies, or if also 0,
system default settings apply for the extension.rw INTEGER .1.3.6.1.4.1.272.4.20.4.1.19 |
pabxExtCtrlByCapiAppCtrlByCapiAppl indicates whether a capi application controls
this extension. If set to on a special CAPI application
registered for handling incoming calls, causing PABX to only
signal that incoming call towards CAPI application, hence
avoiding a spurious short alerting of Phone until call is
answered by application.
A CAPI application can request this feature by a LISTEN request
with special contents.
The default value is off.rw Enumeration .1.3.6.1.4.1.272.4.20.4.1.20 |
pabxExtCtrlByCapiAppNoCtrlByCapiAppl indicates capi application number that controls
extension in case pabxExtCtrlByCapiApp is set to on.ro INTEGER .1.3.6.1.4.1.272.4.20.4.1.21 |
pabxExtFeatureTableThis table stores all extension related feature settings that
would have overloaded the extension table. The extension for
which the settings apply is identified by its id. Currently
found features are only the different call forwarding modes.
For every mode (unconditional, busy and no reply) a separate
telephone number can be stored. The active call forwarding
mode is stored in an extra mode field.
The pabxExtUsrConfigTable is replaced by that one.
To delete a row set pabxExtFeatureCFMode to value delete.
CAUTION:
deleting a row will result in also deleting the related
extension table entry! SEQUENCE OF PabxExtFeatureEntry .1.3.6.1.4.1.272.4.20.5 |
pabxExtFeatureEntry PabxExtFeatureEntry .1.3.6.1.4.1.272.4.20.5.1 |
pabxExtFeatureExtIdThis parameter identifies the extension for which all feature
settings stored here apply. It must be a valid one, i.e. one
that is also found in the pabxExtensionTable.ro INTEGER .1.3.6.1.4.1.272.4.20.5.1.1 |
pabxExtFeatureCFUncondThis field contains the phone number to be used for
unconditional call forwarding.rw DisplayString .1.3.6.1.4.1.272.4.20.5.1.2 |
pabxExtFeatureCFBusyThis field contains the phone number to be used for
call forwarding in case of busy subscriber.rw DisplayString .1.3.6.1.4.1.272.4.20.5.1.3 |
pabxExtFeatureCFNoReplyThis field contains the phone number to be used for
call forwarding in case user does not respond.rw DisplayString .1.3.6.1.4.1.272.4.20.5.1.4 |
pabxExtFeatureCFNoReplyTimerThis field defines the time in seconds a call must be in state
alerting until call forwarding will be activated. Reasonable
values are 3 up to maybe 30, nevertheless all values between
1 and 120 are allowed.rw INTEGER .1.3.6.1.4.1.272.4.20.5.1.5 |
pabxExtFeatureCFModeIn this field the active call forwarding mode for the
extension is stored. It can have the values none, busy,
noreply and uncond for the different modes. Besides it makes
sense to allow both noreply and busy to be active at a time,
so there's the additional value busy-noreply.
Apart from that, if mode is set to delete the entry will be
deleted.rw Enumeration .1.3.6.1.4.1.272.4.20.5.1.6 |
pabxExtFeatureEMailAddrThis field contains the E-Mail address for the extensionrw DisplayString .1.3.6.1.4.1.272.4.20.5.1.7 |
pabxExtFeatureSystelMSNSlotSystelMSNSlot is only valid for extensions associated with
system terminals. It identifies the MSN configuration slot
within the system phone (1 through 10) where it is to be stored
when configuring system phone from brick.
Value 0 has the special meaning that the configuration slot is
undefined; the configuration position is chosen randomly then.
Default value is 0.rw INTEGER .1.3.6.1.4.1.272.4.20.5.1.8 |
pabxExtFeatureSystelVolumeSystelVolume specifies ringing volume setting within system
phone for externally (to brick) initiated incoming calls.
Default value is 4.rw INTEGER .1.3.6.1.4.1.272.4.20.5.1.9 |
pabxExtFeatureSystelTextSystelText contains info text shown in system phone display
on incoming and outgoing calls indicating the used/directed-to
MSN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.5.1.10 |
pabxGroupTableThe group table contains all defined groups. It contains the
group id and the associated name and one more field that is
currently only needed for deleting groups.
To delete a row set pabxGroupCalladdInhibit to value delete. SEQUENCE OF PabxGroupEntry .1.3.6.1.4.1.272.4.20.8 |
pabxGroupEntry PabxGroupEntry .1.3.6.1.4.1.272.4.20.8.1 |
pabxGroupIdThe group id is a non-negative identificator that is unique.
The maximum value for it is 2147483647. Id 0 treated
specially meaning 'auto group id' when creating new groups.rw INTEGER .1.3.6.1.4.1.272.4.20.8.1.1 |
pabxGroupNameThe group name is just a human readable description for the
group and serves for ease of configuration.rw DisplayString .1.3.6.1.4.1.272.4.20.8.1.2 |
pabxGroupCalladdInhibitAs of the necessity to be able of removing groups, another
integer variable had to be added. Therefore only the value
delete has consequences. The other values are for future use
and normal entries so far may have either value.rw Enumeration .1.3.6.1.4.1.272.4.20.8.1.3 |
pabxTerminalTableThe terminal table contains all terminals with specification
of their corresponding hardware interface, hence invalidating
the respective entries in the extension table. Besides a
primary user may be given that will be assumed for newly
created extensions for that terminal.
Deleting a row is done by setting pabxTermDestination to value
delete. SEQUENCE OF PabxTerminalEntry .1.3.6.1.4.1.272.4.20.9 |
pabxTerminalEntry PabxTerminalEntry .1.3.6.1.4.1.272.4.20.9.1 |
pabxTermIdThe id uniquely identifies a terminal and can have the values
0 up to 2147483647, where number 0 has the special meaning
'auto id' when creating new terminals.rw INTEGER .1.3.6.1.4.1.272.4.20.9.1.1 |
pabxTermNameThis optional field contains just a (preferably unique)
descriptive name for the terminal.rw DisplayString .1.3.6.1.4.1.272.4.20.9.1.2 |
pabxTermSlotDesignates the slot of the physical interface the terminal
is attached to.rw INTEGER .1.3.6.1.4.1.272.4.20.9.1.3 |
pabxTermUnitDesignates the unit of the physical interface the terminal
is attached to.rw INTEGER .1.3.6.1.4.1.272.4.20.9.1.4 |
pabxTermDestinationThis object specifies the type of the destination. When
set to physical, the destination is the physical device
selected by pabxExtSlot and pabxExtUnit. When set to
application, the extension may be used by CAPI or TAPI
software applications. When set to internet-telephony,
the destination is the computer on the network with
the ip-address pabxExtIpAddr. When this object ist set to
multiprotocol-routing, the destination is the builtin
multiprotocol-router. In this case the object
pabxExtLayer1Prot may be used to specify the layer1 protocol
and pabxExtIfIndex may be used to assign the extension to
a specific multiprotocol-interface. Finally isdn-login may
be used to assign the extension to the isdn-login facility
of the system.rw Enumeration .1.3.6.1.4.1.272.4.20.9.1.5 |
pabxTermPrimUserIdThe primary user id allows for automatically setting the user
for newly created extensions for that terminal. The default
value is 0 meaning no particular user.rw INTEGER .1.3.6.1.4.1.272.4.20.9.1.6 |
pabxTermTypeThe terminal type identifies which kind of terminal it is.
By default type is set to phone; other possibilities are
modem, fax and headset.
When set to modem or fax the normal dial tone is provided
instead of a pulsed one normally (without automatic dialout
on trunks).rw Enumeration .1.3.6.1.4.1.272.4.20.9.1.7 |
pabxTermProfileIdProfileId holds an id specifying an applying profile entry in
pabx profile table.
If set to 0 no profile applies as 0 is not a valid id for
profiles. In that case system default settings apply for
the terminal (-> pabxSTATICTable).rw INTEGER .1.3.6.1.4.1.272.4.20.9.1.8 |
pabxTermSystelSerialNoThis field is only for terminals of type system-phone and
specifies its serial number.
For terminals set to terminal type 'system phone' the next
system terminal found will automatically be associated with
a terminal in case serial number is left blank.
Default value is the empty string.rw DisplayString .1.3.6.1.4.1.272.4.20.9.1.9 |
pabxExtToGroupTableThe exttogroup table contains all associations of extensions
to groups. To allow for extensions being in arbitrary groups
as well as groups containing any number of extensions it is
necessary to implement an extra table holding that
informations and is done right here. Currently the table has
only 3 columns (beside the index) where two of them hold an
id either, one an extension id the other a group id, and the
last column currently serves solely for the purpose of
deleting rows.
Deleting a row is done by setting pabxTerminalLock to value
delete. SEQUENCE OF PabxExtToGroupEntry .1.3.6.1.4.1.272.4.20.10 |
pabxExtToGroupEntry PabxExtToGroupEntry .1.3.6.1.4.1.272.4.20.10.1 |
pabxExtToGroupExtIdThis field identifies the extension that should become member
in a group.rw INTEGER .1.3.6.1.4.1.272.4.20.10.1.1 |
pabxExtToGroupGroupIdThis field identifies the group the extension will become
member ofrw INTEGER .1.3.6.1.4.1.272.4.20.10.1.2 |
pabxExtToGroupCallPickupActiveCurrently the only purpose of that field is to supply the user
with a possibility to delete such association entries.rw Enumeration .1.3.6.1.4.1.272.4.20.10.1.3 |
pabxTrunkMsnTableThe pabxTrunkMsnTable contains all MSNs that were detected
during auto-configuration process on point-to-multipoint
trunk lines.
The table is handled solely by pabxautocf, hence there's
no chance for alteration or deletion of rows. SEQUENCE OF PabxTrunkMsnEntry .1.3.6.1.4.1.272.4.20.11 |
pabxTrunkMsnEntry PabxTrunkMsnEntry .1.3.6.1.4.1.272.4.20.11.1 |
pabxTrunkMsnSlotSpecifies slot of interface for which an MSN is found.ro INTEGER .1.3.6.1.4.1.272.4.20.11.1.1 |
pabxTrunkMsnUnitSpecifies unit of interface for which an MSN is found.ro INTEGER .1.3.6.1.4.1.272.4.20.11.1.2 |
pabxTrunkMsnNumberHolds the found MSN.ro DisplayString .1.3.6.1.4.1.272.4.20.11.1.3 |
pabxTrunkMsnNumberTypeTells the type of number stored in pabxTrunkMsnNumber field.ro Enumeration .1.3.6.1.4.1.272.4.20.11.1.4 |
pabxProfileTableThe pabxProfileTable. SEQUENCE OF PabxProfileEntry .1.3.6.1.4.1.272.4.20.12 |
pabxProfileEntry PabxProfileEntry .1.3.6.1.4.1.272.4.20.12.1 |
pabxProfileIdIdentifies a profile entry for association to extension,
terminal or user. Must be within range 0-2147483647 where value
'0' has special meaning 'automatic id' when creating a new
entry. Hence, value '0' cannot be used and may only show up in
MIB table for ignored entries.rw INTEGER .1.3.6.1.4.1.272.4.20.12.1.1 |
pabxProfileNameDescriptive - preferably unique - name for profile.rw DisplayString .1.3.6.1.4.1.272.4.20.12.1.2 |
pabxProfileAutoDialOutNoNumber string to be dialled automatically when just starting a
call. Allows for automatical dialout via trunk.
Default is the empty string '' meaning the system default
shall be used (see pabxSTATICTable).
If not empty it takes precedence over system default.rw DisplayString .1.3.6.1.4.1.272.4.20.12.1.3 |
pabxProfileDialPermDefine dial permissions of extension.
When set to 'internal' dialling out over (external) trunks is
prevented.
Value 'local' allows dialling external numbers without an area
prefix.
With setting 'national' any national number but special numbers
(like mobile numbers) may be dialled.
The only restriction applying to value 'national_special' is
dialling of internaltional numbers.
The default setting 'full' grants access to any number.rw Enumeration .1.3.6.1.4.1.272.4.20.12.1.4 |
pabxProfileAvailabilityDefine availability of an extension/terminal.
By default extensions are fully available (full), i.e. internal
and external bound calls can reach the extension depending on
the trunk constellation.
Setting availability to internal restricts the extension to be
called only by internal callers.rw Enumeration .1.3.6.1.4.1.272.4.20.12.1.5 |
pabxExtNoPermTableThe pabxExtNoPermTable. SEQUENCE OF PabxExtNoPermEntry .1.3.6.1.4.1.272.4.20.13 |
pabxExtNoPermEntry PabxExtNoPermEntry .1.3.6.1.4.1.272.4.20.13.1 |
pabxExtNoPermNumberrw DisplayString .1.3.6.1.4.1.272.4.20.13.1.1 |
pabxExtNoPermPermissionrw Enumeration .1.3.6.1.4.1.272.4.20.13.1.2 |
pabxExtNoPermStatusro Enumeration .1.3.6.1.4.1.272.4.20.13.1.3 |
pabxExtNoPermDescriptionrw DisplayString .1.3.6.1.4.1.272.4.20.13.1.4 |
systelTerminalTableThe systelTerminalTable stores all information about system
phones attached to the brick. This covers serial number,
software version, release date and other information provided
by system phone.
Deleting a row is done by setting systelTermAutoMove to value
delete. SEQUENCE OF SystelTerminalEntry .1.3.6.1.4.1.272.4.20.14 |
systelTerminalEntry SystelTerminalEntry .1.3.6.1.4.1.272.4.20.14.1 |
systelTermSerialNoThis field is only for terminals of type system-phone and
specifies its serial number.rw DisplayString .1.3.6.1.4.1.272.4.20.14.1.1 |
systelTermAutoMoveThis field specifies whether a terminal shall be automatically
reconfigured in case terminal logs in on another port than the
one defined in current configuration.
By default automatic reconfiguration is disabled.rw Enumeration .1.3.6.1.4.1.272.4.20.14.1.2 |
systelTermSWVersionSystelSWVersion shows the version of the attached system phone
and is only valid for terminals of type system-phone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.14.1.3 |
systelTermRelDateSystelRelDate shows the system phone software's release date
and is only valid for terminals of type system-phone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.14.1.4 |
systelTermCountrySystelCountry shows the active country profile in the attached
system phone and is only valid for terminals of type
system-phone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.14.1.5 |
systelTermOEMStringSystelOEMString shows OEM string found in system phone and is
only valid for terminals of type system-phone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.14.1.6 |
systelTermDBVersionSystelDBVersion shows data base version found in system phone
and is only valid for terminals of type system-phone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.272.4.20.14.1.7 |
systelTermSlotThe field systelTermSlot serves as a hint to which port the
system phone is attached to and is only needed for automatical
configuration purposes.ro INTEGER .1.3.6.1.4.1.272.4.20.14.1.8 |
systelTermUnitThe field systelTermUnit serves as a hint to which port the
system phone is attached to and is only needed for automatical
configuration purposes.ro INTEGER .1.3.6.1.4.1.272.4.20.14.1.9 |
systelTermTeiThe field systelTermTei only shows the TEI of an active system
terminal.ro INTEGER .1.3.6.1.4.1.272.4.20.14.1.10 |
systelTermAutoConfAutoConf controls whether the brick tries setting system phone
configuration automatically. Value off means no automatic
setting is performed, value on-registration causes the brick to
invoke automatic configuration upon system phone registration.
Default value is off.rw Enumeration .1.3.6.1.4.1.272.4.20.14.1.11 |
systelTermTriggerConfTriggerConf allows for initiation of configuration process
by setting variable to start anytime when system phone is
registered with brick. Beyond termination status of last
configuration process is reflected: either done upon success or
error upon failure.
Default value is done.rw Enumeration .1.3.6.1.4.1.272.4.20.14.1.12 |
systelTermLastConfActionLastConfAction remembers the most recently performed action
initiated via TriggerConf helping users interpreting return
value of either done or error there.
Default value is unknown.ro Enumeration .1.3.6.1.4.1.272.4.20.14.1.13 |
pabxSpeedDialTableThe pabxSpeedDialTable contains shortcuts for dialling
arbitrary numbers.
and is in fact part of the dial plan like extensions and trunk
prefixes.
Deleting a row is done by setting pabxSpeedDialCtrl to value
delete. SEQUENCE OF PabxSpeedDialEntry .1.3.6.1.4.1.272.4.20.15 |
pabxSpeedDialEntry PabxSpeedDialEntry .1.3.6.1.4.1.272.4.20.15.1 |
pabxSpeedDialShortcutThis field contains the shortcut number for an arbitrary number
by which it is replaced.rw DisplayString .1.3.6.1.4.1.272.4.20.15.1.1 |
pabxSpeedDialNumberThis field contains actual number that replaces shortcut.rw DisplayString .1.3.6.1.4.1.272.4.20.15.1.2 |
pabxSpeedDialCtrlThis field specifies whether a speed dial entry is active at
all. Besides entries in speed dial table can be deleted by
setting this field to delete.
Default value is onrw Enumeration .1.3.6.1.4.1.272.4.20.15.1.3 |
pabxLocalPrefixWhen this object is not empty, internal numbers are dialed by
using the contents of this object as a prefix. External
numbers are dialled as usual, without using a prefix.
When this object is empty, internal numbers are dialled
without a prefix, while external numbers need a prefix
specified in the pabxTrunkPrefixTable.rw DisplayString .1.3.6.1.4.1.272.4.20.20 |
pabxTrunkMaskThis object is a bitmask specifying the set of trunk-lines
to be used for external calls, when pabxLocalPrefix is
not empty and external numbers are dialled without
trunk-prefix.rw BitValue .1.3.6.1.4.1.272.4.20.21 |
pabxPriorityVoiceEnable of Disable Priority Voice Featurerw Enumeration .1.3.6.1.4.1.272.4.20.22 |
pabxMusicOnHoldSelect the source while call in hold staterw Enumeration .1.3.6.1.4.1.272.4.20.23 |
pabxDoorIntercomCallExtensionSpecify extension to be called by door intercom.rw DisplayString .1.3.6.1.4.1.272.4.20.24 |
pabxDoorIntercomExternalOpenSpecifies whether opening the door (i.e. calling a door
intercom extension) is possible via a trunk call ('allow')
or not ('deny').
The default is 'denied'.rw Enumeration .1.3.6.1.4.1.272.4.20.25 |
pabxTapiAdmPasswordPassword for TAPI super-user named 'TAPIadmin'. Default is
'bintec'.rw DisplayString .1.3.6.1.4.1.272.4.20.26 |
pabxDefaultAutoDialOutNoString to be used by default if auto dialout is selected for a
user/terminal/extension that has no profile associated with.
Default value at system initialisation (no boot configuration)
is '0'.
If it's set to an empty string autodialout is disabled by
system default.rw DisplayString .1.3.6.1.4.1.272.4.20.27 |
pabxDefaultAvailabilityDefine default availability of extension w/o associated
profile.
By default extensions are fully available (full), i.e. internal
and external bound calls can reach the extension depending on
the trunk constellation.
Setting availability to internal restricts referred to
extensions to be available only by internal callers.rw Enumeration .1.3.6.1.4.1.272.4.20.28 |
pabxDefaultDialPermDefine dial permissions of extensions w/o associated profile.
When set to 'internal' dialling out over (external) trunks is
prevented.
Value 'local' allows dialling external numbers without an area
prefix.
With setting 'national' any national number but special numbers
(like mobile numbers) may be dialled.
The only restriction applying to value 'national_special' is
dialling of internaltional numbers.
The default setting 'full' grants access to any number.rw Enumeration .1.3.6.1.4.1.272.4.20.29 |
pabxExternalCallDialPermDefine dial permissions for external calls.
When set to 'internal' dialling out over (external) trunks is
prevented.
Value 'local' allows dialling external numbers without an area
prefix.
With setting 'national' any national number but special numbers
(like mobile numbers) may be dialled.
The only restriction applying to value 'national_special' is
dialling of internaltional numbers.
The default setting is 'internal'.rw Enumeration .1.3.6.1.4.1.272.4.20.30 |
pabxCapiAdmPasswordPassword for CAPI super-user named 'CAPIadmin'. Default is
an empty password meaning CAPIadmin registration is blocked.rw DisplayString .1.3.6.1.4.1.272.4.20.31 |
pabxCountrySpecifies country where machine resides for country specific
settings.rw Enumeration .1.3.6.1.4.1.272.4.20.32 |