BROCADE-VCS-MIB
The BROCADE-VCS-MIB provides SNMP monitoring and management capabilities for Brocade VDX switch clusters operating in either Fabric or Logical Chassis modes, exposing metrics for fabric topology, principal switch election status, and inter-switch synchronization states.
Imported Objects
Objects
27 total| Object Name |
|---|
brocadeVcsMIBThe MIB module for the monitoring of VCS fabrics. VCS fabrics is a proprietary technology of Brocade. A VCS fabric consists of a set of inter-connected Brocade VDX switches. These set of switches together behave like a single L2 switch to the outside world. The cluster can operate in 2 modes: fabric mode and Logical chassis mode. In fabric mode, the switches together behave like a single L2 switch - but configuration on each switch is independent of the other. In logical chassis mode, one switch in the fabric is elected as the principal switch. All configurations need to be done only from the principal switch. This is synced across to all the switches in the fabric. Thus the configuration information is the same on all the switches. MODULE-IDENTITY .1.3.6.1.4.1.1588.3.1.6 |
brocadeVcsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.6.1 |
vcsConfigModeThe configuration mode of this cluster that is in effect.ro VcsConfigMode .1.3.6.1.4.1.1588.3.1.6.1.1 |
vcsModeOfOperationThe operational mode of this cluster.ro VcsOperationMode .1.3.6.1.4.1.1588.3.1.6.1.2 |
vcsIdentifierThe unique identifier of this cluster.ro VcsIdentifier .1.3.6.1.4.1.1588.3.1.6.1.3 |
vcsVirtualIpV4AddressThe virtual IPv4 address of the cluster. Management stations can use this address to send requests.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1588.3.1.6.1.4 |
vcsVirtualIpV6AddressThe virtual IPv6 address of the cluster. Management stations can use this address to send requests.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1588.3.1.6.1.5 |
vcsVirtualIpAssociatedRbridgeIdThe rbridge-id of the switch that hosts the virtual IP address.ro VcsRbridgeId .1.3.6.1.4.1.1588.3.1.6.1.6 |
vcsVirtualIpInterfaceIdThe interface Id that is configured in the case of inband configuration. If it is not inband configuration, then this object will contain the value 0.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.6.1.7 |
vcsVirtualIpV4OperStatusThe operational status of the virtual IPv4 address.ro Enumeration .1.3.6.1.4.1.1588.3.1.6.1.8 |
vcsVirtualIpV6OperStatusThe operational status of the virtual IPv6 address.ro Enumeration .1.3.6.1.4.1.1588.3.1.6.1.9 |
vcsNumNodesInClusterThe number of switches in the cluster that are currently online.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.6.1.10 |
vcsClusterConditionThe condition of the cluster as a whole.ro VcsClusterCondition .1.3.6.1.4.1.1588.3.1.6.1.11 |
vcsFabricIslTableThis table contains all the ISLs (Inter Switch Link) on the local device. SEQUENCE OF VcsFabricIslEntry .1.3.6.1.4.1.1588.3.1.6.1.12 |
vcsFabricIslEntryRepresents a single Inter Switch Link (ISL) on this switch. VcsFabricIslEntry .1.3.6.1.4.1.1588.3.1.6.1.12.1 |
vcsFabricIslIndexA unique id to distinguish this ISL from others on the local device. Unsigned32 .1.3.6.1.4.1.1588.3.1.6.1.12.1.1 |
vcsFabricIslIntfNameThe interface name (ifName) of the interface on which the ISL is formed on this switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.6.1.12.1.2 |
vcsFabricIslNbrIntfNameThe interface name (ifName) of the interface on the neighboring switch for this ISL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.6.1.12.1.3 |
vcsFabricIslNbrWWNThe World Wide Name (WWN) of the neighboring switch for this ISL.ro FcWwn (Brocade-TC) .1.3.6.1.4.1.1588.3.1.6.1.12.1.4 |
vcsFabricIslNbrNameThe name of the neighboring switch on which this ISL is formed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.6.1.12.1.5 |
vcsFabricIslBWThe band-width of this ISL.ro Unsigned32 UNITS "megabytes" .1.3.6.1.4.1.1588.3.1.6.1.12.1.6 |
vcsFabricIslIsTrunkAn indication whether this ISL is a trunk interface. A value of true(1) means it is a trunk. A value of false(2) means it is not a trunk.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.6.1.12.1.7 |
brocadeVcsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.6.2 |
brocadeVcsConformanceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.6.2.1 |
brocadeVcsObjectsGroupThe MIB objects related to VCS monitoring. Unknown .1.3.6.1.4.1.1588.3.1.6.2.1.1 |
brocadeVcsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.6.2.2 |
brocadeVcsComplianceThe compliance information for this MIB. Unknown .1.3.6.1.4.1.1588.3.1.6.2.2.1 |
More MIBs from Brocade
Browse all BrocadeMIBs →SW-MIB provides management and monitoring capabilities for Brocade Fibre Channel switches, exposing critical operational metrics such as port status, traffic counters, buffer credits, and fabric topology state. This module enables the collection of performance data and fault detection for storage area network (SAN) infrastructure via SNMP.
The BROCADE-SYSTEM-MIB provides standard SNMP access to Brocade Fibre Channel and Ethernet switch system-level attributes, including device identity, hardware status, environmental sensors, and operational counters. It enables centralized monitoring of critical infrastructure health metrics such as temperature, fan status, power supply states, and system uptime across the Brocade SAN and LAN fabric.
The LINK-INCIDENT-MIB module monitors FICON link incident and failure events for host and device connections to Brocade Fibre Channel switches within Fabos environments. It provides specific counters and status indicators to track link stability and fault conditions for FICON traffic traversing the switch fabric.
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
The BROCADE-TMSTATS-MIB module provides SNMP access to performance counters and operational statistics for Brocade Traffic Manager (TM) hardware and software components, specifically monitoring data plane throughput, packet processing rates, buffer utilization, and traffic flow metrics.
The BROCADE-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) policies on Brocade Fibre Channel and Ethernet switches, specifically tracking rule definitions, hit counts, and packet drop statistics to enforce network segmentation and security.