BROCADE-UDLD-MIB
The BROCADE-UDLD-MIB module enables monitoring and notification of Unidirectional Link Detection (UDLD) protocol states and link failure events on Brocade Fibre Channel switches. It specifically tracks UDLD session status, neighbor discovery results, and unidirectional link alarms to facilitate rapid isolation of faulty physical paths.
Imported Objects
Objects
12 total| Object Name |
|---|
brocadeUdldMIBThis MIB module supports UDLD related notifications. MODULE-IDENTITY .1.3.6.1.4.1.1588.3.1.9 |
bcsiUdldNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.9.0 |
bcsiUdldNotifLinkDownThe SNMP trap that is generated when UDLD port link status has changed to down. NOTIFICATION-TYPE .1.3.6.1.4.1.1588.3.1.9.0.1 |
bcsiUdldNotifLinkUpThe SNMP trap that is generated when UDLD port link status has changed to up. NOTIFICATION-TYPE .1.3.6.1.4.1.1588.3.1.9.0.2 |
bcsiUdldObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.9.1 |
bcsiUdldNotifObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.9.1.1 |
bcsiUdldNotifMessageGeneric Notification message string for UDLD notifications.ro SnmpAdminString .1.3.6.1.4.1.1588.3.1.9.1.1.1 |
bcsiUdldConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.9.2 |
bcsiUdldCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.9.2.1 |
bcsiUdldComplianceThe compliance statement for entities which implement BROCADE-UDLD-MIB. Unknown .1.3.6.1.4.1.1588.3.1.9.2.1.1 |
bcsiUdldGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.9.2.2 |
bcsiUdldNotifGroupA collection of notifications for UDLD MIB. Unknown .1.3.6.1.4.1.1588.3.1.9.2.2.1 |
More MIBs from Brocade
Browse all BrocadeMIBs →SW-MIB provides management and monitoring capabilities for Brocade Fibre Channel switches, exposing critical operational metrics such as port status, traffic counters, buffer credits, and fabric topology state. This module enables the collection of performance data and fault detection for storage area network (SAN) infrastructure via SNMP.
The BROCADE-SYSTEM-MIB provides standard SNMP access to Brocade Fibre Channel and Ethernet switch system-level attributes, including device identity, hardware status, environmental sensors, and operational counters. It enables centralized monitoring of critical infrastructure health metrics such as temperature, fan status, power supply states, and system uptime across the Brocade SAN and LAN fabric.
The LINK-INCIDENT-MIB module monitors FICON link incident and failure events for host and device connections to Brocade Fibre Channel switches within Fabos environments. It provides specific counters and status indicators to track link stability and fault conditions for FICON traffic traversing the switch fabric.
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
The BROCADE-TMSTATS-MIB module provides SNMP access to performance counters and operational statistics for Brocade Traffic Manager (TM) hardware and software components, specifically monitoring data plane throughput, packet processing rates, buffer utilization, and traffic flow metrics.
The BROCADE-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) policies on Brocade Fibre Channel and Ethernet switches, specifically tracking rule definitions, hit counts, and packet drop statistics to enforce network segmentation and security.