BROCADE-TCAM-MIB
The BROCADE-TCAM-MIB enables monitoring of Ternary Content-Addressable Memory (TCAM) resource utilization, occupancy levels, and allocation status on Brocade networking hardware to manage the capacity for hardware-based forwarding and access control list (ACL) entries.
Imported Objects
Objects
19 total| Object Name |
|---|
bcsiTCAMThe MIB module to describe generic objects for the usage of Ternary Content-Addressable Memory (TCAM). MODULE-IDENTITY .1.3.6.1.4.1.1588.3.1.14 |
bcsiTCAMNotification OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.14.0 |
bcsiTCAMObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.14.1 |
bcsiTCAMGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.14.1.1 |
bcsiTCAMProfileThis object identifies TCAM partition profile. Each profile adjusts the partitions to optimize the device for corresponding applications.ro Enumeration .1.3.6.1.4.1.1588.3.1.14.1.1.1 |
bcsiTCAMUsageGroup OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.14.1.2 |
bcsiTCAMUsageTableA list of bcsiTCAMUsage entries. This table contains information of the entity's TCAM usage. SEQUENCE OF BcsiTCAMUsageEntry .1.3.6.1.4.1.1588.3.1.14.1.2.1 |
bcsiTCAMUsageEntryAn entry containing management information applicable to TCAM usage BcsiTCAMUsageEntry .1.3.6.1.4.1.1588.3.1.14.1.2.1.1 |
bcsiTCAMUsageSlotA number which uniquely identifies a linecard in the device Unsigned32 .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.1 |
bcsiTCAMUsageProcessorA number which uniquely identifies the network processor within a linecard in the device Unsigned32 .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.2 |
bcsiTCAMUsageFeatureThis object identifies the feature within the linecard and network processor. Enumeration .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.3 |
bcsiTCAMUsageContainerIdThis object identifies the bank container which can refer to a single bank or multiple TCAM banks.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.4 |
bcsiTCAMUsageDBIdThis object identifies the logical database.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.5 |
bcsiTCAMUsageSizeThis object indicates if the size for this feature in the current profile is fixed or dynamic.ro Enumeration .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.6 |
bcsiTCAMUsageCurrentUsageThis object indicates the current usage of TCAM entries by this feature.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.7 |
bcsiTCAMUsageMaxLimitThis object indicates the Maximum Limit of TCAM entries available for this feature.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.8 |
bcsiTCAMUsageFreeCountContainerThis object indicates the number of free entries in the Container that is associated with the TCAM logical database used by this feature. Used for debugging purpose.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.9 |
bcsiTCAMUsageFreeCountDBThis object indicates the number of free entries in the TCAM logical database used by this feature. Used for debugging purpose.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.10 |
bcsiTCAMUsageFreeCountFeatureThis object indicates the number of free entries available for this feature. Used for debugging purpose.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.1588.3.1.14.1.2.1.1.11 |
More MIBs from Brocade
Browse all BrocadeMIBs →SW-MIB provides management and monitoring capabilities for Brocade Fibre Channel switches, exposing critical operational metrics such as port status, traffic counters, buffer credits, and fabric topology state. This module enables the collection of performance data and fault detection for storage area network (SAN) infrastructure via SNMP.
The BROCADE-SYSTEM-MIB provides standard SNMP access to Brocade Fibre Channel and Ethernet switch system-level attributes, including device identity, hardware status, environmental sensors, and operational counters. It enables centralized monitoring of critical infrastructure health metrics such as temperature, fan status, power supply states, and system uptime across the Brocade SAN and LAN fabric.
The LINK-INCIDENT-MIB module monitors FICON link incident and failure events for host and device connections to Brocade Fibre Channel switches within Fabos environments. It provides specific counters and status indicators to track link stability and fault conditions for FICON traffic traversing the switch fabric.
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
The BROCADE-TMSTATS-MIB module provides SNMP access to performance counters and operational statistics for Brocade Traffic Manager (TM) hardware and software components, specifically monitoring data plane throughput, packet processing rates, buffer utilization, and traffic flow metrics.
The BROCADE-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) policies on Brocade Fibre Channel and Ethernet switches, specifically tracking rule definitions, hit counts, and packet drop statistics to enforce network segmentation and security.