BROCADE-INTERFACE-STATS-MIB
The BROCADE-INTERFACE-STATS-MIB extends standard SNMP interface monitoring on Brocade switches by exposing vendor-specific utilization and watermark metrics beyond the capabilities of the standard ifTable and ifXTable. This module enables precise tracking of interface throughput trends and buffer allocation thresholds to detect congestion and resource exhaustion in high-performance storage area networks.
Imported Objects
Objects
27 total| Object Name |
|---|
brocadeInterfaceStatsMIBThis MIB module supports additional interface stats as compared to ifTable and ifXTable. Specifically, it supports interface utilization statistics and interface watermark statistics. MODULE-IDENTITY .1.3.6.1.4.1.1588.3.1.11 |
bcsiIfStatsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.11.0 |
bcsiIfStatsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.11.1 |
bcsiIfStatsTableThis table consists of ingress and egress interface statistics value, ingress and egress interface utilization value. SEQUENCE OF BcsiIfStatsEntry .1.3.6.1.4.1.1588.3.1.11.1.1 |
bcsiIfStatsEntryAn entry in the bcsiIfStats table indicates the stats and utilization on an interface. BcsiIfStatsEntry .1.3.6.1.4.1.1588.3.1.11.1.1.1 |
bcsiIfStatsInBitsPerSecThe number of bits per second received on the interface.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.1588.3.1.11.1.1.1.1 |
bcsiIfStatsOutBitsPerSecThe number of bits per second transmitted out of the interface.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.1588.3.1.11.1.1.1.2 |
bcsiIfStatsInPktsPerSecThe number of packets per second received on the interface.ro Gauge32 .1.3.6.1.4.1.1588.3.1.11.1.1.1.3 |
bcsiIfStatsOutPktsPerSecThe number of packets per second transmitted out of the interface.ro Gauge32 .1.3.6.1.4.1.1588.3.1.11.1.1.1.4 |
bcsiIfStatsInUtilizationThe input network utilization in hundredths of a percent. For example, a value of 200 indicates 2 percent utilization.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.11.1.1.1.5 |
bcsiIfStatsOutUtilizationThe output network utilization in hundredths of a percent. For example, a value of 200 indicates 2 percent utilization.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.11.1.1.1.6 |
bcsiIfStatsInJumboFramesThe total number of jumbo packets received on the interface.ro Counter64 .1.3.6.1.4.1.1588.3.1.11.1.1.1.7 |
bcsiIfWatermarkTableTable to display the highest/lowest Tx/Rx BitRate and PktRate of a port for the current and previous 1 hour/24 hour window. SEQUENCE OF BcsiIfWatermarkEntry .1.3.6.1.4.1.1588.3.1.11.1.2 |
bcsiIfWatermarkEntryAn entry in the bcsiIfWatermarkTable containing the highest/lowest Tx/Rx BitRate and PktRate of a port for the current and previous 1 hour/24 hour window. BcsiIfWatermarkEntry .1.3.6.1.4.1.1588.3.1.11.1.2.1 |
bcsiIfWatermarkWindowTypeInterface Watermark window during which the mornitoring is done. Enumeration .1.3.6.1.4.1.1588.3.1.11.1.2.1.1 |
bcsiIfWatermarkTrafficDirectionTraffic direction of the mornitored data for Interface Watermarking. Enumeration .1.3.6.1.4.1.1588.3.1.11.1.2.1.2 |
bcsiIfWatermarkTypeInterface Watermark type. Enumeration .1.3.6.1.4.1.1588.3.1.11.1.2.1.3 |
bcsiIfWatermarkBitRateBit rate when the Lowest/Highest bit rate was recorded on the interface, inside the specified window for the specified traffic direction.ro CounterBasedGauge64 UNITS "BitsPerSec" .1.3.6.1.4.1.1588.3.1.11.1.2.1.4 |
bcsiIfWatermarkPktRatePacket rate when the Lowest/Highest packet rate was recorded on the interface, inside the specified window for the specified traffic direction.ro Gauge32 UNITS "PktsPerSec" .1.3.6.1.4.1.1588.3.1.11.1.2.1.5 |
bcsiIfWatermarkUpdateTimeTime at which the port Bit/Pkt rate hit its lowest/highest mark, inside the specified window for the specified traffic direction.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.11.1.2.1.6 |
bcsiIfWatermarkWindowStartTimeTime at which the specified window (Curr1Hr/Last1Hr/Curr24Hr/Last24Hr) started.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.11.1.2.1.7 |
bcsiIfStatsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.11.2 |
bcsiIfStatsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.11.2.1 |
bcsiIfStatsComplianceThe compliance statement for entities which implement BROCADE-INTERFACE-STATS-MIB. Unknown .1.3.6.1.4.1.1588.3.1.11.2.1.1 |
bcsiIfStatsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.11.2.2 |
bcsiIfStatsGroupA collection of objects for ingress and egress interface stats and interface utilization. Unknown .1.3.6.1.4.1.1588.3.1.11.2.2.1 |
bcsiIfWatermarkGroupA collection of objects for interface traffic water marking. Unknown .1.3.6.1.4.1.1588.3.1.11.2.2.2 |
More MIBs from Brocade
Browse all BrocadeMIBs →SW-MIB provides management and monitoring capabilities for Brocade Fibre Channel switches, exposing critical operational metrics such as port status, traffic counters, buffer credits, and fabric topology state. This module enables the collection of performance data and fault detection for storage area network (SAN) infrastructure via SNMP.
The BROCADE-SYSTEM-MIB provides standard SNMP access to Brocade Fibre Channel and Ethernet switch system-level attributes, including device identity, hardware status, environmental sensors, and operational counters. It enables centralized monitoring of critical infrastructure health metrics such as temperature, fan status, power supply states, and system uptime across the Brocade SAN and LAN fabric.
The LINK-INCIDENT-MIB module monitors FICON link incident and failure events for host and device connections to Brocade Fibre Channel switches within Fabos environments. It provides specific counters and status indicators to track link stability and fault conditions for FICON traffic traversing the switch fabric.
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
The BROCADE-TMSTATS-MIB module provides SNMP access to performance counters and operational statistics for Brocade Traffic Manager (TM) hardware and software components, specifically monitoring data plane throughput, packet processing rates, buffer utilization, and traffic flow metrics.
The BROCADE-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) policies on Brocade Fibre Channel and Ethernet switches, specifically tracking rule definitions, hit counts, and packet drop statistics to enforce network segmentation and security.